| Age | Commit message (Collapse) | Author |
|---|
|
Clear the target bit fields in register before setting new values. This
ensures proper field updates by removing any existing bits that might
interfere with the new configuration.
Fixes: 22da60f0304b ("HID: Intel-thc-hid: Intel-thc: Introduce interrupt delay control")
Fixes: 45e92a093099 ("HID: Intel-thc-hid: Intel-thc: Introduce max input size control")
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Correct the read register for the setting of max input size and
interrupt delay.
Fixes: 22da60f0304b ("HID: Intel-thc-hid: Intel-thc: Introduce interrupt delay control")
Fixes: 45e92a093099 ("HID: Intel-thc-hid: Intel-thc: Introduce max input size control")
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Needed as a basisi for followup support for quicki2c advanced BIOS features.
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Remove hard-coded strings by using the str_true_false() helper function.
Signed-off-by: Liu Song <liu.song13@zte.com.cn>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Improper use of secondary pointer (&dev->i2c_subip_regs) caused
kernel crash and out-of-bounds error:
BUG: KASAN: slab-out-of-bounds in _regmap_bulk_read+0x449/0x510
Write of size 4 at addr ffff888136005dc0 by task kworker/u33:5/5107
CPU: 3 UID: 0 PID: 5107 Comm: kworker/u33:5 Not tainted 6.16.0+ #3 PREEMPT(voluntary)
Workqueue: async async_run_entry_fn
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0
print_report+0xd1/0x660
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? kasan_complete_mode_report_info+0x26/0x200
kasan_report+0xe1/0x120
? _regmap_bulk_read+0x449/0x510
? _regmap_bulk_read+0x449/0x510
__asan_report_store4_noabort+0x17/0x30
_regmap_bulk_read+0x449/0x510
? __pfx__regmap_bulk_read+0x10/0x10
regmap_bulk_read+0x270/0x3d0
pio_complete+0x1ee/0x2c0 [intel_thc]
? __pfx_pio_complete+0x10/0x10 [intel_thc]
? __pfx_pio_wait+0x10/0x10 [intel_thc]
? regmap_update_bits_base+0x13b/0x1f0
thc_i2c_subip_pio_read+0x117/0x270 [intel_thc]
thc_i2c_subip_regs_save+0xc2/0x140 [intel_thc]
? __pfx_thc_i2c_subip_regs_save+0x10/0x10 [intel_thc]
[...]
The buggy address belongs to the object at ffff888136005d00
which belongs to the cache kmalloc-rnd-12-192 of size 192
The buggy address is located 0 bytes to the right of
allocated 192-byte region [ffff888136005d00, ffff888136005dc0)
Replaced with direct array indexing (&dev->i2c_subip_regs[i]) to ensure
safe memory access.
Fixes: 4228966def884 ("HID: intel-thc-hid: intel-thc: Add THC I2C config interfaces")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Tested-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This patch adds support for a new feature, named "Interrupt Delay",
allowing driver to set a specific delay time for next interrupt
detection. It gives driver a capability to control THC waiting time for
the next interrupt, to reduce the likelihood of spurious readings.
APIs added:
- thc_i2c_set_rx_int_delay(): Set I2C Rx input interrupt delay value
- thc_i2c_rx_int_delay_enable(): Enable or disable I2C Rx interrupt delay
As this interrupt delay feature is only applicable to RxDMA and must
remain disabled during SWDMA operations, it also involves a change
in SWDMA code to record the max input size control feature state
before SWDMA and restore the state after SWDMA.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Chong Han <chong.han@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This patch adds support for a new feature, named "Max Input Size
Control", allowing driver to set a maximum input size for RxDMA. This
enhancement aims to prevent RxDMA buffer overruns caused by data
corruption on the I2C bus, thereby improving overall system stability.
APIs added:
- thc_i2c_set_rx_max_size(): Set the maximum input size for I2C RxDMA.
- thc_i2c_rx_max_size_enable(): Enable or disable the max input size
control.
As this max input size control feature is only applicable to RxDMA
and must remain disabled during SWDMA operations, it also involves
a change in SWDMA code to record the max input size control feature
state before SWDMA and restore the state after SWDMA.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Chong Han <chong.han@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Don't populate the read-only arrays frequency and frequency_div on
the stack at run time, instead make them static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Return -ENOMEM if the allocation fails. Don't return success.
Fixes: 4228966def88 ("HID: intel-thc-hid: intel-thc: Add THC I2C config interfaces")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/eb4ea363-c3b7-4988-9ff5-5ed74bf47620@stanley.mountain
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Add I2C bus related APIs to initialize I2C sub-system parameters, such
as bus speed, slave address, address bit. As I2C sub-system hasn't
auto register save and restore support, provide APIs to do it manually.
Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add SPI bus related APIs to configure SPI operation parameters,
such as port type, bus frequency, bus IO mode, read/write OPcode,
and slave register addresses.
Co-developed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add common interrupt handler to clear interrupt status and return
interrupt type to caller for future handling.
Co-developed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
THC supports LTR configuration and runtimely mode switching. There
are two LTR modes: Active LTR and Low Power LTR.
THC hardware layer provides APIs for LTR configuration and mode
switching.
Co-developed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
As THC PIO only has 64 bytes FIFO length, THC DMAs are introduced to
send/receive large data packets.
THC has three types of DMA channels: Read DMA channel (RxDMA), Write DMA
channel (TxDMA) and Software DMA (SWDMA).
In addition to basic DMA functions, THC RxDMA also includes an auto
hardware sequence which can handle external touch device's interrupt
automatically without software involved. THC RxDMA channel usually is
used for handling touch input reports.
THC TxDMA is very similar with general IO TxDMA, and usually is used
for sending command/request to exteranl touch device.
THC SWDMA can perform read, write followed by read operation
according to different configurations. Unlike RxDMA triggered by bus
activity, SWDMA can be triggered by SW driver at any time, for example:
- Retrieving an input report without interrupt
- Sending command followed by reading response
THC DMA operation flow includes 4 steps:
1. Allocate DMA buffers
2. Configure opcode, fill PRD table with DMA buffers, enable DMA channel
3. Wait for completion, read out DMA buffers and update buffer pointers
4. Stop DMA and release DMA buffers
THC Hardware layer driver provides APIs for all above DMA Steps.
Co-developed-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add THC interrupt operation interfaces, such as interrupt configure,
global interrupt enable/disable, external touch device GPIO interrupt
quiesce and unquiesce.
Co-developed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
THC PIO (programmed I/O) operations are very similar with general
SPI/I2C read/write operation to access external slave device on the bus
through internal FIFO.
THC PIO operations are split into 4 steps:
1. prepare: configure hardware with correct opcode, slave address, and
fill the PIO FIFO
2. start: set start bit to issue a bus send/receive
3. wait: wait for bus sending/receiving completion
4. complete: check send/receive data in FIFO and return
Co-developed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Create intel-thc-hid folder and add Kconfig and Makefile for THC drivers.
Add basic THC device context structure, definitions and related
initialization APIs for THC Hardware layer driver. Also initialize
regmap struct for future THC registers access.
Co-developed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
