diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/bitfield.h | 26 | ||||
| -rw-r--r-- | include/linux/soc/mediatek/mtk_wed.h | 1 | ||||
| -rw-r--r-- | include/net/cfg80211.h | 16 | ||||
| -rw-r--r-- | include/net/mac80211.h | 73 | ||||
| -rw-r--r-- | include/uapi/linux/nl80211.h | 4 |
5 files changed, 79 insertions, 41 deletions
diff --git a/include/linux/bitfield.h b/include/linux/bitfield.h index c9be1657f03d..ebfa12f69501 100644 --- a/include/linux/bitfield.h +++ b/include/linux/bitfield.h @@ -115,6 +115,32 @@ ((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask); \ }) +#define __BF_CHECK_POW2(n) BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0) + +/** + * FIELD_PREP_CONST() - prepare a constant bitfield element + * @_mask: shifted mask defining the field's length and position + * @_val: value to put in the field + * + * FIELD_PREP_CONST() masks and shifts up the value. The result should + * be combined with other fields of the bitfield using logical OR. + * + * Unlike FIELD_PREP() this is a constant expression and can therefore + * be used in initializers. Error checking is less comfortable for this + * version, and non-constant masks cannot be used. + */ +#define FIELD_PREP_CONST(_mask, _val) \ + ( \ + /* mask must be non-zero */ \ + BUILD_BUG_ON_ZERO((_mask) == 0) + \ + /* check if value fits */ \ + BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \ + /* check if mask is contiguous */ \ + __BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) + \ + /* and create the value */ \ + (((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask)) \ + ) + /** * FIELD_GET() - extract a bitfield element * @_mask: shifted mask defining the field's length and position diff --git a/include/linux/soc/mediatek/mtk_wed.h b/include/linux/soc/mediatek/mtk_wed.h index b939bd2750a0..fd0b0605cf90 100644 --- a/include/linux/soc/mediatek/mtk_wed.h +++ b/include/linux/soc/mediatek/mtk_wed.h @@ -103,7 +103,6 @@ struct mtk_wed_device { struct { int size; - struct page_frag_cache rx_page; struct mtk_rxbm_desc *desc; dma_addr_t desc_phys; } rx_buf_ring; diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 03d4f4deadae..54a77d906b2d 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1075,7 +1075,6 @@ struct survey_info { s8 noise; }; -#define CFG80211_MAX_WEP_KEYS 4 #define CFG80211_MAX_NUM_AKM_SUITES 10 /** @@ -1099,9 +1098,6 @@ struct survey_info { * port frames over NL80211 instead of the network interface. * @control_port_no_preauth: disables pre-auth rx over the nl80211 control * port for mac80211 - * @wep_keys: static WEP keys, if not NULL points to an array of - * CFG80211_MAX_WEP_KEYS WEP keys - * @wep_tx_key: key index (0..3) of the default TX static WEP key * @psk: PSK (for devices supporting 4-way-handshake offload) * @sae_pwd: password for SAE authentication (for devices supporting SAE * offload) @@ -1134,8 +1130,6 @@ struct cfg80211_crypto_settings { bool control_port_no_encrypt; bool control_port_over_nl80211; bool control_port_no_preauth; - struct key_params *wep_keys; - int wep_tx_key; const u8 *psk; const u8 *sae_pwd; u8 sae_pwd_len; @@ -4683,13 +4677,12 @@ struct cfg80211_ops { * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels. * @WIPHY_FLAG_HAS_CHANNEL_SWITCH: Device supports channel switch in * beaconing mode (AP, IBSS, Mesh, ...). - * @WIPHY_FLAG_HAS_STATIC_WEP: The device supports static WEP key installation - * before connection. * @WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK: The device supports bigger kek and kck keys * @WIPHY_FLAG_SUPPORTS_MLO: This is a temporary flag gating the MLO APIs, * in order to not have them reachable in normal drivers, until we have * complete feature/interface combinations/etc. advertisement. No driver * should set this flag for now. + * @WIPHY_FLAG_SUPPORTS_EXT_KCK_32: The device supports 32-byte KCK keys. */ enum wiphy_flags { WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK = BIT(0), @@ -4702,7 +4695,7 @@ enum wiphy_flags { WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7), WIPHY_FLAG_IBSS_RSN = BIT(8), WIPHY_FLAG_MESH_AUTH = BIT(10), - /* use hole at 11 */ + WIPHY_FLAG_SUPPORTS_EXT_KCK_32 = BIT(11), /* use hole at 12 */ WIPHY_FLAG_SUPPORTS_FW_ROAM = BIT(13), WIPHY_FLAG_AP_UAPSD = BIT(14), @@ -4715,7 +4708,6 @@ enum wiphy_flags { WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL = BIT(21), WIPHY_FLAG_SUPPORTS_5_10_MHZ = BIT(22), WIPHY_FLAG_HAS_CHANNEL_SWITCH = BIT(23), - WIPHY_FLAG_HAS_STATIC_WEP = BIT(24), }; /** @@ -7783,7 +7775,7 @@ void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr, /** * cfg80211_del_sta_sinfo - notify userspace about deletion of a station * @dev: the netdev - * @mac_addr: the station's address + * @mac_addr: the station's address. For MLD station, MLD address is used. * @sinfo: the station information/statistics * @gfp: allocation flags */ @@ -7794,7 +7786,7 @@ void cfg80211_del_sta_sinfo(struct net_device *dev, const u8 *mac_addr, * cfg80211_del_sta - notify userspace about deletion of a station * * @dev: the netdev - * @mac_addr: the station's address + * @mac_addr: the station's address. For MLD station, MLD address is used. * @gfp: allocation flags */ static inline void cfg80211_del_sta(struct net_device *dev, diff --git a/include/net/mac80211.h b/include/net/mac80211.h index e3235b9c02c2..2635e6de8101 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -653,6 +653,23 @@ struct ieee80211_fils_discovery { * write-protected by sdata_lock and local->mtx so holding either is fine * for read access. * @color_change_color: the bss color that will be used after the change. + * @vht_su_beamformer: in AP mode, does this BSS support operation as an VHT SU + * beamformer + * @vht_su_beamformee: in AP mode, does this BSS support operation as an VHT SU + * beamformee + * @vht_mu_beamformer: in AP mode, does this BSS support operation as an VHT MU + * beamformer + * @vht_mu_beamformee: in AP mode, does this BSS support operation as an VHT MU + * beamformee + * @he_su_beamformer: in AP-mode, does this BSS support operation as an HE SU + * beamformer + * @he_su_beamformee: in AP-mode, does this BSS support operation as an HE SU + * beamformee + * @he_mu_beamformer: in AP-mode, does this BSS support operation as an HE MU + * beamformer + * @he_full_ul_mumimo: does this BSS support the reception (AP) or transmission + * (non-AP STA) of an HE TB PPDU on an RU that spans the entire PPDU + * bandwidth */ struct ieee80211_bss_conf { const u8 *bssid; @@ -726,6 +743,15 @@ struct ieee80211_bss_conf { bool color_change_active; u8 color_change_color; + + bool vht_su_beamformer; + bool vht_su_beamformee; + bool vht_mu_beamformer; + bool vht_mu_beamformee; + bool he_su_beamformer; + bool he_su_beamformee; + bool he_mu_beamformer; + bool he_full_ul_mumimo; }; /** @@ -1436,6 +1462,7 @@ enum mac80211_rx_encoding { RX_ENC_HT, RX_ENC_VHT, RX_ENC_HE, + RX_ENC_EHT, }; /** @@ -1469,7 +1496,7 @@ enum mac80211_rx_encoding { * @antenna: antenna used * @rate_idx: index of data rate into band's supported rates or MCS index if * HT or VHT is used (%RX_FLAG_HT/%RX_FLAG_VHT) - * @nss: number of streams (VHT and HE only) + * @nss: number of streams (VHT, HE and EHT only) * @flag: %RX_FLAG_\* * @encoding: &enum mac80211_rx_encoding * @bw: &enum rate_info_bw @@ -1477,6 +1504,9 @@ enum mac80211_rx_encoding { * @he_ru: HE RU, from &enum nl80211_he_ru_alloc * @he_gi: HE GI, from &enum nl80211_he_gi * @he_dcm: HE DCM value + * @eht: EHT specific rate information + * @eht.ru: EHT RU, from &enum nl80211_eht_ru_alloc + * @eht.gi: EHT GI, from &enum nl80211_eht_gi * @rx_flags: internal RX flags for mac80211 * @ampdu_reference: A-MPDU reference number, must be a different value for * each A-MPDU but the same for each subframe within one A-MPDU @@ -1498,8 +1528,18 @@ struct ieee80211_rx_status { u32 flag; u16 freq: 13, freq_offset: 1; u8 enc_flags; - u8 encoding:2, bw:3, he_ru:3; - u8 he_gi:2, he_dcm:1; + u8 encoding:3, bw:4; + union { + struct { + u8 he_ru:3; + u8 he_gi:2; + u8 he_dcm:1; + }; + struct { + u8 ru:4; + u8 gi:2; + } eht; + }; u8 rate_idx; u8 nss; u8 rx_flags; @@ -5884,9 +5924,6 @@ void ieee80211_iterate_active_interfaces_atomic(struct ieee80211_hw *hw, * This function iterates over the interfaces associated with a given * hardware that are currently active and calls the callback for them. * This version can only be used while holding the wiphy mutex. - * The driver must not call this with a lock held that it can also take in - * response to callbacks from mac80211, and it must not call this within - * callbacks made by mac80211 - both would result in deadlocks. * * @hw: the hardware struct of which the interfaces should be iterated over * @iter_flags: iteration flags, see &enum ieee80211_interface_iteration_flags @@ -5901,24 +5938,6 @@ void ieee80211_iterate_active_interfaces_mtx(struct ieee80211_hw *hw, void *data); /** - * ieee80211_iterate_stations - iterate stations - * - * This function iterates over all stations associated with a given - * hardware that are currently uploaded to the driver and calls the callback - * function for them. - * This function allows the iterator function to sleep, when the iterator - * function is atomic @ieee80211_iterate_stations_atomic can be used. - * - * @hw: the hardware struct of which the interfaces should be iterated over - * @iterator: the iterator function to call, cannot sleep - * @data: first argument of the iterator function - */ -void ieee80211_iterate_stations(struct ieee80211_hw *hw, - void (*iterator)(void *data, - struct ieee80211_sta *sta), - void *data); - -/** * ieee80211_iterate_stations_atomic - iterate stations * * This function iterates over all stations associated with a given @@ -7191,7 +7210,7 @@ ieee80211_get_unsol_bcast_probe_resp_tmpl(struct ieee80211_hw *hw, struct ieee80211_vif *vif); /** - * ieeee80211_obss_color_collision_notify - notify userland about a BSS color + * ieee80211_obss_color_collision_notify - notify userland about a BSS color * collision. * * @vif: &struct ieee80211_vif pointer from the add_interface callback. @@ -7200,8 +7219,8 @@ ieee80211_get_unsol_bcast_probe_resp_tmpl(struct ieee80211_hw *hw, * @gfp: allocation flags */ void -ieeee80211_obss_color_collision_notify(struct ieee80211_vif *vif, - u64 color_bitmap, gfp_t gfp); +ieee80211_obss_color_collision_notify(struct ieee80211_vif *vif, + u64 color_bitmap, gfp_t gfp); /** * ieee80211_is_tx_data - check if frame is a data frame diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index c14a91bbca7c..8ecb0fbee721 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -424,7 +424,8 @@ * interface identified by %NL80211_ATTR_IFINDEX. * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC * or, if no MAC address given, all stations, on the interface identified - * by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and + * by %NL80211_ATTR_IFINDEX. For MLD station, MLD address is used in + * %NL80211_ATTR_MAC. %NL80211_ATTR_MGMT_SUBTYPE and * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type * of disconnection indication should be sent to the station * (Deauthentication or Disassociation frame and reason code for that @@ -5869,6 +5870,7 @@ enum plink_actions { #define NL80211_KEK_LEN 16 #define NL80211_KCK_EXT_LEN 24 #define NL80211_KEK_EXT_LEN 32 +#define NL80211_KCK_EXT_LEN_32 32 #define NL80211_REPLAY_CTR_LEN 8 /** |