| Age | Commit message (Collapse) | Author |
|---|
|
It is recommended that on Lunar Lake the PIO (immediate command response)
is used instead of CORB/RIRB for commands/verbs.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240409083812.14001-5-peter.ujfalusi@linux.intel.com>
|
|
Set the use_pio_for_commands flag in case AZX_DCAPS_PIO_COMMANDS quirk is
enabled.
When the PIO command mode is used we can re-use the existing
azx_single_send_cmd() / azx_single_get_response() functions safely as the
CORB DMA is not going to be enabled in snd_hdac_bus_init_cmd_io().
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240409083812.14001-4-peter.ujfalusi@linux.intel.com>
|
|
In case the use_pio_for_commands flag is set we must not enable the
CORB DMA to make sure that it is not interfering with the immediate
command mode.
Convert the snd_hdac_bus_send_cmd/snd_hdac_bus_get_response as wrappers to
call either the PIO or CORB based command handling depending on the
use_pio_for_commands flag.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240409083812.14001-3-peter.ujfalusi@linux.intel.com>
|
|
Add AZX_DCAPS_PIO_COMMANDS quirk (bit 31) and use_pio_for_commands flag to
be able to select PIO mode as alternative for CORB based command sending
while retaining the RIRB functionality to receive unsolicited responses.
This mode differs from the azx single_cmd mode when RIRB is disabled.
The mixed mode is needed on Lunar Lake family because it is recommended to
use Immediate Command Response (PIO mode) instead of CORB for HDA commands.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240409083812.14001-2-peter.ujfalusi@linux.intel.com>
|
|
The Vocaster Two has a Bluetooth module with a volume control. Add a
corresponding ALSA mixer control.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <b78687f7243142a4466f63c0aee9742b44ee395d.1710264833.git.g@b4.vu>
|
|
The Scarlett 4th Gen and Vocaster interfaces allow the autogain target
dBFS value(s) to be configured. Add Mean and Peak Target controls for
4th Gen, and a Hot Target control for Vocaster.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <33d7f6dc965ab09522361ec99745a0685e4b8272.1710264833.git.g@b4.vu>
|
|
Add Focusrite Vocaster One and Two USB IDs, notification arrays,
config sets, and device info data.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <5fb48555a8db7bb322b25784b165829357cd6e42.1710264833.git.g@b4.vu>
|
|
Add filter and compressor DSP controls for the Vocaster interfaces.
Mark scarlett2_notify_input_dsp() as __always_unused until it gets
used when the Vocaster callback function array is added.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <a45316f79600b862dae38da24f13def638b06476.1710264833.git.g@b4.vu>
|
|
Add controls for the input mute switches that the Vocaster interfaces
have. Mark scarlett2_notify_input_mute() as __always_unused until it
gets used when the Vocaster callback function array is added.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <3b384b4e759241bd06f0c223e9f4f00467d88318.1710264833.git.g@b4.vu>
|
|
The autogain status texts are different for Vocaster vs. Scarlett 4th
Gen, so make them configurable per-config-set.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <b1adcd3dc48117d4ebe16812eeb7f1dbf1ede472.1710264833.git.g@b4.vu>
|
|
Remove the #define SCARLETT2_MAX_GAIN_DB and replace with a
per-config-set TLV as the Vocaster has a maximum gain of 70dB vs the
4th Gen 69dB.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <ade8e18ce38927ea0224946ec7cfea23ad3793d8.1710264833.git.g@b4.vu>
|
|
The 4th Gen Scarlett interfaces added software-controllable input gain
along with channel select, channel link, auto-gain, and "safe" mode.
Vocaster has software-controllable input gain and auto-gain but not
channel select, channel link, or safe mode.
Add a device info field safe_input_count to indicate how many channels
have a safe mode control, and use the presence of the input select and
input link switch configuration parameters to determine if those
controls should be created.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <167f04a37d0fb23f3077705df835adbc4f2b6a8e.1710264833.git.g@b4.vu>
|
|
Update scarlett2_usb_get_config() to support 32-bit values which are
needed by the upcoming Vocaster support.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <ee35dce0172b2aa3fec8163ab8f35bdc35a141bd.1710264833.git.g@b4.vu>
|
|
scarlett2_usb_set_config() was using size = 0 as a signal to use the
parameter buffer. Replace that with an explicit indication (pbuf = 1),
as the upcoming Vocaster support has a config item written via the
parameter buffer with size = 1 rather than the implicit size of 8.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <50a7d85bb04f9a7f13f667c70a706826c8d3ef93.1710264833.git.g@b4.vu>
|
|
The location pointed to by gen4_write_addr and gen4_write_addr + 1 is
officially known as the parameter buffer. Update the code to match.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <aa36ecb8d3ce67387b5edf6c900f0b8a509241ce.1710264833.git.g@b4.vu>
|
|
Add hwdep read op so flash segments can be read.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <800d20a801e8c59c2905c82ecae5676cd4f31429.1710264833.git.g@b4.vu>
|
|
After scarlett2_usb() sends a command, it seems that we should wait
for an ACK before attempting to read the response. Not doing that
didn't seem necessary previously but seems to be causing occasional
issues with 4th Gen devices.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <452d1263c40fa8eba1cfb24e2055e40a84cbc437.1710264833.git.g@b4.vu>
|
|
So that more forward declarations won't be required when we add
handling of the ACK notification, move the initialisation functions to
after the notification functions.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <0922071cb8be99a2394705de27b917d1e4e46f3f.1710264833.git.g@b4.vu>
|
|
pcm_formats should be a u64 as it is a SNDRV_PCM_FMTBIT_* not a
SNDRV_PCM_FORMAT_*.
Also fix a small grammar error while we're here.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404170103.ySYwieqi-lkp@intel.com/
Signed-off-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/r/20240417-sunxi_s32_fix-v1-1-d82e451565c0@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The patch which fixed the missing remove_late() calls missed a case
when sof_select_ipc_and_paths() could return with error and in this
case sof_init_environment() would just return with 0.
Do not ignore the error code returned by sof_select_ipc_and_paths().
Fixes: 90f8917e7a15 ("ASoC: SOF: Core: Add remove_late() to sof_init_environment failure path")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240417075804.10829-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Copy the few differences from mt8186-mt6166-da7219-max98357 in the
mt8186-mt6366-rt1019-rt5682s driver to greatly reduce code duplication;
since now the driver is meant to support MT8186 with the MT6366 PMIC
codec and various combinations of I2S codecs, rename the driver to
mt8186-mt6366 for consistency with MT8195 and MT8188, and rename
the configuration option to SND_SOC_MT8186_MT6366.
Since right now there is no machine using the da7219-max98357 yet, the
snd_soc_dapm_route array was omitted as it's now possible to specify
the audio routing in device trees instead.
While at it, also add the missing sentinel comment to the last entry
of the of_device_id array.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-14-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since the mtk-afe-platform-driver generic mtk_afe_pcm_platform now has
a common .probe() callback, there is no reason to keep duplicating this
function over and over in the SoC specific AFE-PCM drivers: switch over
to register with the common bits instead.
Note that MT8186 was left out of this because it is registering some
extra sinegen controls in the AFE-PCM probe callback and needs extra
cleanups to be able to use the common bits.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-13-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Multiple MediaTek AFE PCM component drivers are using their own .probe()
callback, but most of those are simply duplicated functions as they are
doing exactly the same thing over and over.
Add a common probe callback for this component to reduce duplication.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-12-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a const mtk_pcm_constraints_data struct array with all of the
(again, constant) constraints for all of the supported usecases,
remove the duplicated functions and call mtk_soundcard_startup()
instead in all of the .startup() callbacks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-11-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a const mtk_pcm_constraints_data struct array with all of the
(again, constant) constraints for all of the supported usecases,
remove the duplicated functions and call mtk_soundcard_startup()
instead in all of the .startup() callbacks.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-10-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a const mtk_pcm_constraints_data struct array with all of the
(again, constant) constraints for all of the supported usecases,
remove the duplicated functions and call mtk_soundcard_startup()
instead in all of the .startup() callbacks.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-9-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
MediaTek platforms are typically setting PCM rate and channels
constraints for playback, capture and HDMI/DisplayPort playback:
commonize the startup callback by adding the PCM constraints data
to the mtk_platform_card_data structure and by reusing the common
mtk_soundcard_startup() function for all of them by getting back
the parameters from the aforementioned struct.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-8-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add mtk_soundcard_pdata platform data for the MediaTek common sound card
probe mechanism, including a driver/soc-specific probe extension (used
for bits that cannot be commonized hence specific to this driver), and
change the probe function to mtk_soundcard_common_probe.
This is also adding the possibility of specifying the links and routing
with the audio-routing property and (x)-dai-link nodes in device trees
to stop hardcoding machine specific links in the card driver assupported
by the common probe function, but support for legacy device trees is
retained with a legacy_probe function, which is used only in case the
new properties are not found.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add mtk_soundcard_pdata platform data for the MediaTek common sound card
probe mechanism, including a driver/soc-specific probe extension (used
for bits that cannot be commonized hence specific to this driver), and
change the probe function to mtk_soundcard_common_probe.
This is also adding the possibility of specifying the links and routing
with the audio-routing property and (x)-dai-link nodes in device trees
to stop hardcoding machine specific links in the card driver assupported
by the common probe function, but support for legacy device trees is
retained with a legacy_probe function, which is used only in case the
new properties are not found.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add mtk_soundcard_pdata platform data for the MediaTek common sound card
probe mechanism, including a driver/soc-specific probe extension (used
for bits that cannot be commonized hence specific to this driver), and
change the probe function to mtk_soundcard_common_probe.
This is also adding the possibility of specifying the links and routing
with the audio-routing property and (x)-dai-link nodes in device trees
to stop hardcoding machine specific links in the card driver assupported
by the common probe function, but support for legacy device trees is
retained with a legacy_probe function, which is used only in case the
new properties are not found.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add mtk_soundcard_pdata platform data for the MediaTek common sound card
probe mechanism, including a driver/soc-specific probe extension (used
for bits that cannot be commonized hence specific to this driver), and
change the probe function to mtk_soundcard_common_probe.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Apart from a dai_link_list variable, the mtk_sof_priv currently holds
data that never gets modified during runtime.
Constify the mtk_sof_priv structure and move the SOF dai_link_list as
sof_dai_link_list in struct mtk_soc_card_data, which is a structure
that already holds the card's machine specific, runtime modified data.
This allows to safely pass the mtk_sof_priv structure as platform data
for the commonized card probe mechanism.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a common machine soundcard driver probe function that supports both
DSP and AFE-direct usecases and also provides a hook for legacy machine
soundcard driver probe mechanisms.
Note that the hook is there because, even for legacy probe, a lot of the
actual code can still be commonized, hence still reducing duplication
for the legacy devicetree retrocompatibility cases.
This common probe function deprecates all of the inconsistent previous
probe mechanisms and aims to settle all of the MediaTek card drivers on
consistent and common devicetree properties describing wanted DAIs,
device specific DAI configuration and DAI links to codecs found on
each device/board.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
wm8904 codec is used on i.MX95 Toradex board
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1713165456-3494-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add vendor clear control register in readable register's
callback function. This prevents an access failure reported
in Intel CI tests.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Closes: https://github.com/thesofproject/linux/issues/4860
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/6a103ce9134d49d8b3941172c87a7bd4@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The I2S cores used in the H3 onwards support 32-bit sample rates.
Support these by adding a per-variant PCM format list.
Signed-off-by: John Watts <contact@jookia.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240403-sunxi_s32-v2-1-29ebf6ad590a@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Neither core nor the driver modifes 'struct regulator_ops', so it can be
const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414164703.239851-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for platform driver. Having another MODULE_ALIAS
causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154839.126852-2-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for platform driver. Having another MODULE_ALIAS
causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154839.126852-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support microphone from Acer Aspire A315-24P and for some other similar devices with such vendor
Signed-off-by: "end.to.start" <end.to.start@mail.ru>
Link: https://lore.kernel.org/r/20240412075533.10214-1-end.to.start@mail.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
More cleanups from Brent, notably the removal of the redundant
cml_rt1011_rt5682 machine driver, fixes for SoundWire platforms and
changes to sof_rt5682 to allow for 96+ sampling rates.
For the rest of this kernel cycle, we are still working on SoundWire
updates for MeteorLake (usual missing ACPI signature required for
topology selection and jack detection information). We'll provide
those patches as soon as they are reviewed/validated.
|
|
There are two issues here:
1) The get_device() needs a matching put_device() on error paths.
2) The "if (!ret)" was supposed to be "if (ret)".
I re-arranged the code a bit to do the allocation before the
get_device().
Fixes: ef7784e41db7 ("ASoC: soc-card: Add KUnit test case for snd_soc_card_get_kcontrol")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/450dd21a-b24b-48ba-9aa4-c02e4617852f@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When 96KHz sample rate is used, and MCLK is 24.576MHz, we will need
pll_in = 24576000 and pll_out = 49152000 which is not supported by
RT5682S_PLL2. Use RT5682S_PLL1 in this case.
We don't test sample rate because RT5682S_PLL2 doesn't support 24.576MHz
input and in the MCLK = 24.576MHz, sample rate = 48KHz case, i.e.
pll_in == pll_out, PLL will not be used at all.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Delete this driver and use sof_rt5682 machine driver instead.
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For cml boards, ALC1011 speaker amplifier is supported by machine
driver cml_rt1011_rt5682. Use same driver name for backward
compatibility with existing devices on market.
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for boards with four ALC1011 amplifiers. Configuration is
copied from cml_rt1011_rt5682 machine driver for backward
compatibility with existing cml devices.
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the board config mtl_da7219_def to da7219 machine driver for all
mtl boards using default SSP port allocation (headphone codec on SSP2,
speaker amplifiers on SSP0, and BT offload on SSP1).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a common entry in enumeration table for all da7219 boards
with/without speaker amplifier. All other rpl_da7219_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a common entry in enumeration table for all da7219 boards
with/without speaker amplifier. All other adl_da7219_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch removes a confusion between speakers and amplifiers.
The existing code keeps track of the number of amplifiers and reports
it in the 'cfg-amp' component string.
The number of speakers is defined with quirks, but those quirks are
not consistently added: in the MeteorLake case, none of the supported
platforms used such a quirk, and UCM does not use the values reported
anyways. The notion of 'FOUR_SPEAKERS' is also obsolete now with some
platforms having more than four speakers.
Let's just remove all this and only report the number of amplifiers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240411220347.131267-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
