summaryrefslogtreecommitdiff
path: root/sound/soc/sof
AgeCommit message (Collapse)Author
2024-04-09ASoC: SOF: Intel: mtl: Add fw_regs area to debugfs mapPeter Ujfalusi
Expose the firmware registers via debugfs. it can be of great help while debugging complex issues. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240409113349.21623-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-09ASoC: SOF: Intel: tgl: Add fw_regs area to debugfs map for IPC4Peter Ujfalusi
Expose the firmware registers via debugfs. it can be of great help while debugging complex issues. The area is only available with IPC4. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240409113349.21623-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-09ASoC: SOF: ipc4-pcm: Do not reset the ChainDMA if it has not been allocatedPeter Ujfalusi
The ChainDMA operation differs from normal pipelines that it is only created when the stream started, in fact a PCM using ChainDMA has no pipelines, modules. To reset a ChainDMA, it needs to be first allocated in firmware. When PulseAudio/PipeWire starts, they will probe the PCMs by opening them, check hw_params and then close the PCM without starting audio. Unconditionally resetting the ChainDMA can result the following error: ipc tx : 0xe040000|0x0: GLB_CHAIN_DMA ipc tx reply: 0x2e000007|0x0: GLB_CHAIN_DMA FW reported error: 7 - Unsupported operation requested ipc error for msg 0xe040000|0x0 sof_pcm_stream_free: pcm_ops hw_free failed -22 Add a new chain_dma_allocated flag to sof_ipc4_pcm_stream_priv to store the ChainDMA allocation state and use this flag to skip sending the reset if the ChainDMA is not allocated. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://msgid.link/r/20240409110036.9411-5-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-09ASoC: SOF: ipc4-pcm: Introduce generic sof_ipc4_pcm_stream_privPeter Ujfalusi
Using the sof_ipc4_timestamp_info struct directly as sps->private data is too restrictive, add a new generic sof_ipc4_pcm_stream_priv struct containing the time_info to allow new information to be stored in a generic way. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://msgid.link/r/20240409110036.9411-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-09ASoC: SOF: ipc4-pcm: Use consistent name for sof_ipc4_timestamp_info pointerPeter Ujfalusi
The pointer to sof_ipc4_timestamp_info named most of the time as 'time_info' only to be named as 'stream_info' or 'info' in two function. Use the consistent name of 'time_info' throughout the file. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://msgid.link/r/20240409110036.9411-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-09ASoC: SOF: ipc4-pcm: Use consistent name for snd_sof_pcm_stream pointerPeter Ujfalusi
Throughout the file the pointer for snd_sof_pcm_stream is named either 'stream' or (wrongly) 'spcm' which confuses the reader. Use 'sps' for the pointer name as it is the most common name used in SOF codebase. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://msgid.link/r/20240409110036.9411-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-05ASoC: SOF: Intel: improve and extend HDaudio-basedMark Brown
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: For LunarLake, the SoundWire in-band wake detection is reported with the HDAudio WAKE_EN/WAKE_STS registers. In the existing code, these registers are only handled for HDaudio codecs. Now the same registers have to be handled with care as shared resources. The in-band wake detection mainly used for jack detection. Without this patchset, the SoundWire headset codecs signal an event that would be ignored and not reported.
2024-04-05ASoC: Intel: avs: Fixes and cleanups for 6.10Mark Brown
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>: Set of changes targeting the avs-driver only. No new features, patchset either fixes or fortifies existing code. Patchset starts off with a fix for debugbility on ICL+ platforms which I have forgotten to fixup when providing support for these initially. The next two address copier module initialization, most importantly, silence the gcc 'field-spanning write' false-positive. The following four: 6/13 ASoC: Intel: avs: Replace risky functions with safer variants 7/13 ASoC: Intel: avs: Fix potential integer overflow 8/13 ASoC: Intel: avs: Test result of avs_get_module_entry() 9/13 ASoC: Intel: avs: Remove dead code address problems found out by Coverity static analysis tool. The last two worth mentioning are: recommendation from the firmware team to wake subsystem from D0ix when starting any pipeline -and- shielding against invalid period/buffer sizes. Audio format shall be taken into consideration when calculating either of these. Amadeusz Sławiński (2): ASoC: Intel: avs: Restore stream decoupling on prepare ASoC: Intel: avs: Add assert_static to guarantee ABI sizes Cezary Rojewski (11): ASoC: Intel: avs: Fix debug-slot offset calculation ASoC: Intel: avs: Silence false-positive memcpy() warnings ASoC: Intel: avs: Fix config_length for config-less copiers ASoC: Intel: avs: Fix ASRC module initialization ASoC: Intel: avs: Replace risky functions with safer variants ASoC: Intel: avs: Fix potential integer overflow ASoC: Intel: avs: Test result of avs_get_module_entry() ASoC: Intel: avs: Remove dead code ASoC: Intel: avs: Wake from D0ix when starting streaming ASoC: Intel: avs: Init debugfs before booting firmware ASoC: Intel: avs: Rule invalid buffer and period sizes out sound/soc/intel/avs/avs.h | 1 + sound/soc/intel/avs/cldma.c | 2 +- sound/soc/intel/avs/core.c | 4 +-- sound/soc/intel/avs/icl.c | 12 ++++++--- sound/soc/intel/avs/loader.c | 6 +++-- sound/soc/intel/avs/messages.h | 47 ++++++++++++++++++++++++++++++++-- sound/soc/intel/avs/path.c | 13 ++++------ sound/soc/intel/avs/pcm.c | 34 +++++++++++++++++++++++- sound/soc/intel/avs/probes.c | 14 ++++++---- 9 files changed, 109 insertions(+), 24 deletions(-) -- 2.25.1
2024-04-05Merge tag 'asoc-fix-v6.9-rc2' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.9 A relatively large set of fixes here, the biggest piece of it is a series correcting some problems with the delay reporting for Intel SOF cards but there's a bunch of other things. Everything here is driver specific except for a fix in the core for an issue with sign extension handling volume controls.
2024-04-04ASoC: SOF: Intel: hda-ctrl: only clear WAKESTS for HDaudio codecsPierre-Louis Bossart
When a PME wake happens due to a SoundWire wake, we currently clear all WAKESTS bits during the resume operation initiated by the PCI subsystem. As a result, we are unable to identify which SoundWire links need to be resumed and don't properly handle jack detection. This patch only clears the WAKESTS bits for the HDaudio codecs detected earlier. Note that we still clear all WAKESTS bits unconditionally in hda_dsp_ctrl_stop_chip(). The existing behavior is potentially racy if e.g. a jack event happens during a suspend routine, but there's a risk of breaking shutdown or reboot sequences so the code is left as is for now. Closes: https://github.com/thesofproject/linux/issues/4687 Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Keqiao Zhang <keqiao.zhang@intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://msgid.link/r/20240404190357.138073-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-04ASoC: SOF: Intel: hda-codec: preserve WAKEEN valuesPierre-Louis Bossart
Since LunarLake, we use the HDadio WAKEEN/WAKESTS to detect wakes for SoundWire codecs. Unfortunately, the existing code in hda_codec_jack_wake_enable() unconditionally resets the WAKEEN bits. This patch changes the initialization to preserve SoundWire WAKEEN bits. For HDAudio codecs the same strategy is used, WAKEEN is only set when the jacktbl.used property is set. Closes: https://github.com/thesofproject/linux/issues/4687 Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Keqiao Zhang <keqiao.zhang@intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://msgid.link/r/20240404190357.138073-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-04ASoC: SOF: Intel: lnl: add helper to detect SoundWire wakesPierre-Louis Bossart
The global STATESTS register will provide information on all links. Rather than iterate on all possible links, the helpers only filters the range of possible bits for a quick lookup. The process_wakeen() helper will walk through all the links and deal with wakes. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Link: https://msgid.link/r/20240404190357.138073-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-04ASoC: SOF: Intel: hda-ctrl: add missing WAKE_STS clearPierre-Louis Bossart
For some reason, the programming sequences in the SOF driver do not include a clear of the WAKE_STS bits before resetting the controller. This clear is not formally required by the HDaudio specification, but was added to harden the snd-hda-reset back in 2007. Adding this sequence back avoids an issue reported by the Intel CI. Closes: https://github.com/thesofproject/linux/issues/4889 Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240404190357.138073-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-04ASoC: SOF: Intel: hda-stream: clarify commentPierre-Louis Bossart
The Yoda grammar and multiple negatives are unclear. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://msgid.link/r/20240404185448.136157-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-04ASoC: SOF: Intel: don't ignore IOC interrupts for non-audio transfersPierre-Louis Bossart
The HDaudio stream interrupts are ignored unless the stream is PCM or compressed audio. For alternate non-audio usages, such as code loader or SoundWire BPT case, the IOC interrupt on the last buffer transferred is silently ignored. This patch adds a 'struct completion' for each HDaudio stream. This capability helps detect if the non-audio data transfers completed. There is no performance impact for audio streams. In the code loader case, the code currently starts the DMA and directly checks if the firmware status changes, without checking if the DMA succeeded. With a first pass waiting for the DMA to complete, system validation engineers can gather more precise timing information on firmware boot time or root-cause boot failures more accurately. A timeout of 500ms was selected for the code loader DMA. This is an experimental value which should be more than enough - higher values would certainly be problematic from a usage/latency perspective. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://msgid.link/r/20240404185448.136157-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-04ASoC: SOF: Intel: hda-loader: change signature of code loader helpersPierre-Louis Bossart
We need to reuse cl_prepare, cl_trigger and cl_cleanup helpers from a SoundWire context where only the device information is available. Rather than pass the 'sdev' argument, use get_drvdata() to retrieve the required structure. For consistency, rename hda_cl_stream_prepare() as hda_cl_prepare(). These three helpers are also exported so that they can be referenced from another module. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://msgid.link/r/20240404185448.136157-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-04ASoC: SOF: Intel: hda-loader: add flag to tag ICCMAX streamPierre-Louis Bossart
The existing code conflates capture stream and ICCMAX stream. This isn't going to be true any longer when we add support for SDW BPT RX streams. Add a boolean tag to flag ICCMAX streams. No functionality change, only future-proofing change. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://msgid.link/r/20240404185448.136157-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-04ASoC: SOF: Core: Add remove_late() to sof_init_environment failure pathChaitanya Kumar Borah
In cases where the sof driver is unable to find the firmware and/or topology file [1], it exits without releasing the i915 runtime pm wakeref [2]. This results in dmesg warnings[3] during suspend/resume or driver unbind. Add remove_late() to the failure path of sof_init_environment so that i915 wakeref is released appropriately [1] [ 8.990366] sof-audio-pci-intel-mtl 0000:00:1f.3: SOF firmware and/or topology file not found. [ 8.990396] sof-audio-pci-intel-mtl 0000:00:1f.3: Supported default profiles [ 8.990398] sof-audio-pci-intel-mtl 0000:00:1f.3: - ipc type 1 (Requested): [ 8.990399] sof-audio-pci-intel-mtl 0000:00:1f.3: Firmware file: intel/sof-ipc4/mtl/sof-mtl.ri [ 8.990401] sof-audio-pci-intel-mtl 0000:00:1f.3: Topology file: intel/sof-ace-tplg/sof-mtl-rt711-2ch.tplg [ 8.990402] sof-audio-pci-intel-mtl 0000:00:1f.3: Check if you have 'sof-firmware' package installed. [ 8.990403] sof-audio-pci-intel-mtl 0000:00:1f.3: Optionally it can be manually downloaded from: [ 8.990404] sof-audio-pci-intel-mtl 0000:00:1f.3: https://github.com/thesofproject/sof-bin/ [ 8.999088] sof-audio-pci-intel-mtl 0000:00:1f.3: error: sof_probe_work failed err: -2 [2] ref_tracker: 0000:00:02.0@ffff9b8511b6a378 has 1/5 users at track_intel_runtime_pm_wakeref.part.0+0x36/0x70 [i915] __intel_runtime_pm_get+0x51/0xb0 [i915] intel_runtime_pm_get+0x17/0x20 [i915] intel_display_power_get+0x2f/0x70 [i915] i915_audio_component_get_power+0x23/0x120 [i915] snd_hdac_display_power+0x89/0x130 [snd_hda_core] hda_codec_i915_init+0x3f/0x50 [snd_sof_intel_hda] hda_dsp_probe_early+0x170/0x250 [snd_sof_intel_hda_common] snd_sof_device_probe+0x224/0x320 [snd_sof] sof_pci_probe+0x15b/0x220 [snd_sof_pci] hda_pci_intel_probe+0x30/0x70 [snd_sof_intel_hda_common] local_pci_probe+0x4c/0xb0 pci_device_probe+0xcc/0x250 really_probe+0x18e/0x420 __driver_probe_device+0x7e/0x170 driver_probe_device+0x23/0xa0 [3] [ 484.105070] ------------[ cut here ]------------ [ 484.108238] thunderbolt 0000:00:0d.2: PM: pci_pm_suspend_late+0x0/0x50 returned 0 after 0 usecs [ 484.117106] i915 0000:00:02.0: i915 raw-wakerefs=1 wakelocks=1 on cleanup [ 484.792005] WARNING: CPU: 2 PID: 2405 at drivers/gpu/drm/i915/intel_runtime_pm.c:444 intel_runtime_pm_driver_release+0x6c/0x80 Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://github.com/thesofproject/linux/pull/4878 Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://msgid.link/r/20240404184813.134566-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-04ASoC: SOF: Clean up sof_ipc_flood_dfs_write()Dan Carpenter
This function doesn't support partial writes so using simple_write_to_buffer() doesn't really make sense. It's better to just use copy_from_user(). Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://msgid.link/r/a35dded2-392b-4ccb-9dbb-d782ac9b6547@moroto.mountain Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-04ASoC: SOF: Disable pointless writes to debugfs fileDan Carpenter
The permissions on this debugfs file are 0444 so it can't be written to. And writing to the file hasn't done anything since commit 6e9548cdb30e ("ASoC: SOF: Convert the generic IPC flood test into SOF client"). Delete the write function. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://msgid.link/r/9d2477cf-25aa-4d12-818f-fdafc9aaa28a@moroto.mountain Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-04ASoC: SOF: imx: stop using the imx8_*_clocks APIMark Brown
Merge series from Laurentiu Mihalcea <laurentiumihalcea111@gmail.com>: The imx8_*_clocks API requires keeping track of all of the clocks used by the IMX SOF driver via an array. This is unnecessary and doesn't scale well. As such, remove it altogether and replace it with devm_clk_bulk_get_all() and friends.
2024-04-04ASoC: SOF: amd: fix for false dsp interruptsVijendar Mukunda
Before ACP firmware loading, DSP interrupts are not expected. Sometimes after reboot, it's observed that before ACP firmware is loaded false DSP interrupt is reported. Registering the interrupt handler before acp initialization causing false interrupts sometimes on reboot as ACP reset is not applied. Correct the sequence by invoking acp initialization sequence prior to registering interrupt handler. Fixes: 738a2b5e2cc9 ("ASoC: SOF: amd: Add IPC support for ACP IP block") Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://msgid.link/r/20240404041717.430545-1-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-03ASoC: SOF: Intel: lnl: Disable DMIC/SSP offload on removePeter Ujfalusi
During probe the DMIC/SSP offload is enabled and it is not reversed on remove. Add a remove wrapper for LNL to disable the offload for DMIC and SSP similarly to what is done during probe. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://msgid.link/r/20240403111839.27259-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-03ASoC: SOF: Intel: mtl/lnl: Improve firmware boot stateMark Brown
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: This series improves the firmware/boot state handling which will allow failed IMR boot recovery and human readable boot failure decoding. Additionally a new debugfs file is added to force a purge/clean boot of the DSP for developers.
2024-04-03ASoC: Merge up fixesMark Brown
Some of these, particularly the wm_adsp one in the immediate case, are needed as a basis for new work.
2024-04-03ASoC: SOF: imx: remove imx8_*_clocks APILaurentiu Mihalcea
Since the i.MX drivers no longer use the imx8_*_clocks API this can be removed. Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://msgid.link/r/20240328221201.24722-3-laurentiumihalcea111@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-03ASoC: SOF: imx: drop usage of the imx8_*_clocks APILaurentiu Mihalcea
Currently, the driver has to keep track of all the clocks it uses via an array of "struct clk_bulk_data", which doesn't scale well and is unnecessary. As such, replace the usage of the imx8_*_clocks with "devm_clk_bulk_get_all()" and friends. Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://msgid.link/r/20240328221201.24722-2-laurentiumihalcea111@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-03ASoC: SOF: Intel: mtl: Correct the mtl_dsp_dump outputPeter Ujfalusi
The ROM/firmware state handling has changed between CAVS and ACE architecture: CAVS: ROM and firmware uses the SRAM window for the state and status/error code reporting ACE: ROM code is using two registers to report the state and error while the firmware is using the SRAM window to report states and status/error codes. Use the generic hda_dsp_get_state() to decode ROM state and error codes and print out the firmware state and status/error code only if the SRAM window is accessible - the firmware is booted and the Status readout is not 0xffffffff. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Link: https://msgid.link/r/20240403105210.17949-8-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-03ASoC: SOF: Intel: hda-dsp/mtl: Add support for ACE ROM state codesPeter Ujfalusi
The ROM state codes differ between CAVS and ACE architecture, there is a slight overlap. Add the ACE related state defines to mtl.h, introduce new table and use it on case the function is called when running on ACE architecture. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Link: https://msgid.link/r/20240403105210.17949-7-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-03ASoC: SOF: Intel: mtl: Implement firmware boot state checkPeter Ujfalusi
With the corrected rom_status_reg values we can now add a check for target boot status for firmware booting. With the check now we can identify failed firmware boots (IMR boots) and we can use the fallback to purge boot the DSP. Fixes: 064520e8aeaa ("ASoC: SOF: Intel: Add support for MeteorLake (MTL)") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Link: https://msgid.link/r/20240403105210.17949-6-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-03ASoC: SOF: Intel: mtl: Disable interrupts when firmware boot failedPeter Ujfalusi
In case of error during the firmware boot we need to disable the interrupts which were enabled as part of the boot sequence. Fixes: 064520e8aeaa ("ASoC: SOF: Intel: Add support for MeteorLake (MTL)") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Link: https://msgid.link/r/20240403105210.17949-5-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-03ASoC: SOF: Intel: lnl: Correct rom_status_regPeter Ujfalusi
ACE2 architecture changed the place where the ROM updates the status code from the shared SRAM window (and HFFLGP1QW0 in ACE1) to HFDSC register for the status and HFDEC (HFDSC + 4) for the error code. The rom_status_reg is not used on LNL because it was wrongly assigned based on older platform convention (SRAM window) and it was giving inconsistent readings. Add new header file for lnl specific register definitions. Fixes: 64a63d9914a5 ("ASoC: SOF: Intel: LNL: Add support for Lunarlake platform") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Link: https://msgid.link/r/20240403105210.17949-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-03ASoC: SOF: Intel: mtl: Correct rom_status_regPeter Ujfalusi
ACE1 architecture changed the place where the ROM updates the status code from the shared SRAM window to HFFLGP1QW0 register for the status and HFFLGP1QW0 + 4 for the error code. The rom_status_reg is not used on MTL because it was wrongly assigned based on older platform convention (SRAM window) and it was giving inconsistent readings. Fixes: 064520e8aeaa ("ASoC: SOF: Intel: Add support for MeteorLake (MTL)") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Link: https://msgid.link/r/20240403105210.17949-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-03ASoC: SOF: Intel: hda: Create debugfs file to force a clean DSP bootPeter Ujfalusi
When IMR boot is supported on a platform it is always going to be used to boot the DSP unless some catastrophic event happens. There is no way for a developer to force a clean DSP boot without removing and re-inserting the modules. Create a 'skip_imr_boot' debugfs file which can be used to force the next DSP boot as clean (prune) boot. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240403105210.17949-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-02ASoC: SOF: cppcheck fixes and debugfs additionMark Brown
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Small changes with 3 cppcheck fixes and the firmware version now visible with debugfs instead of only via dmesg logs.
2024-04-02ASoC: SOF: ipc4-topology: Save the ALH DAI index during hw_paramsRanjani Sridharan
The node_id for multi-gateway ALH DAI's get overwritten with the group_id during the DAI copier's ipc_prepare op. So, save the ALH dai_index during the BE DAI hw_params in the dai_index field of struct ipc4_copier and use that to set the device ID in the configuration blob. This will avoid errors during copier init after an xrun. Note that the dai_index is typically set in topology for DMIC/SSP, but it's not used for ALH. Reclaiming this dai_index field to store the node_id does not generate a conflict with topology-defined values. Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240402151828.175002-18-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-02ASoC: SOF: pcm: reset all PCM sources in case of xrunsPierre-Louis Bossart
With the delayed stops, the xrun handling is problematic: the applications expects everything to be reset but the firmware and DMA are still in a PAUSED state. This patch makes sure the prepare while pending_stop is set is special-cased. Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240402151828.175002-17-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-02ASoC: SOF: pcm: add pending_stop state variablePierre-Louis Bossart
Add a state variable to keep track of delayed stops, in case pcm_ops->platform_stop_during_hw_free is set. This patch should be iso-functionality, possibly removing no-op cases. The main purpose of this new state variable is to prepare a follow-up patch to reset all PCM and DMAs in case of stop/prepare xrun sequences. Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240402151828.175002-16-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-02ASoC: SOF: pcm: simplify sof_pcm_hw_free() with helperPierre-Louis Bossart
The same sequence is used twice, use common helper. Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240402151828.175002-15-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-02ASoC: SOF: sof-audio: revisit sof_pcm_stream_free() error handling and logsPierre-Louis Bossart
For some reason the existing code stops on the first error, which potentially leaves the DMA and widgets in a weird state. Change to free-up all resources even in case of errors. Also add a more consistent error handling and logs, with the first error code returned to the caller. Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240402151828.175002-14-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-02ASoC: SOF: Intel: hda: Clear Soundwire node ID during BE DAI hw_freeRanjani Sridharan
When an xrun happens, the BE DAI hw_params doesn't get invoked before the stream restarts with a prepare. In this case, clearing the node ID when the DAI widget is freed and unprepared will result in an error when it is re-initialized. In order to avoid this, move the code to clear the node ID to the BE DAI hw_free op to keep it balanced with the BE DAI hw_params. Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240402151828.175002-13-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-02ASoC: SOF: Intel: hda: move helper to static inlinePierre-Louis Bossart
To allow using widget_to_sdev() in other files, move it as static inline in shared header file. Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240402151828.175002-12-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-02ASoC: SOF: IPC4: extend dai_data with node_idPierre-Louis Bossart
The node_id value needs to be handled specifically for ALH. Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240402151828.175002-11-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-02ASoC: SOF: Intel: hda: extend signature of sdw_hda_dai_hw_params()Pierre-Louis Bossart
Add intel_alh_id to set the expected gateway node_id in a follow-up patch. Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240402151828.175002-10-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-02ASoC: SOF: Intel: set the DMA TLV device as dai_indexPierre-Louis Bossart
We've already defined the value for dai_index, let's use it instead of open-coding the same thing. No functionality change. Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240402151828.175002-9-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-02ASoC: SOF: Intel: hda-dai: add helpers to set dai configPierre-Louis Bossart
We need to be able to set the dai config differently for SoundWire. Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240402151828.175002-8-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-02ASoC: SOF: Intel: hda-dai: set dma_stream_channel_map deviceBard Liao
sof_ipc4_dma_config_tlv{} is required for ACE2.x. The patch follow the convention to set the dma_stream_channel_map.mapping device as "link_id << 8 | pdi_id". And the mapping in sof_ipc4_alh_configuration_blob{} should be the same as dma_stream_channel_map.mapping in sof_ipc4_dma_config{}. The purposes of device id is to map DMA tlv. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240402151828.175002-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-02ASoC: SOF: Intel: hda-dai: set lowest N bits in ch_maskBard Liao
We always use the lowest N channels of stream. So, set ch_mask to GENMASK(params_channels(params) - 1, 0). Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240402151828.175002-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-02ASoC: SOF: make dma_config_tlv be an arrayBard Liao
Each stream needs a dma_config_tlv. We will handle multi dma_config_tlv in the follow up commits. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240402151828.175002-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-02Revert "ASoC: SOF: Intel: hda-dai-ops: only allocate/release streams for ↵Bard Liao
first CPU DAI" This reverts commit f8ba62ac863c33fc0d8ac3f1270985c2b77f4377. The SoundWire aggregated solution was to use one DMA on multiple links. But, the solution changed to use one DMA for each link. It means that we should assign HDaudio stream_tag for each cpu_dai. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240402151828.175002-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.51.0) at 2026-10-21 04:14:13 +0000