summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2026-03-13net/sched: Only allow act_ct to bind to clsact/ingress qdiscs and shared blocksVictor Nogueira
commit 11cb63b0d1a0685e0831ae3c77223e002ef18189 upstream. As Paolo said earlier [1]: "Since the blamed commit below, classify can return TC_ACT_CONSUMED while the current skb being held by the defragmentation engine. As reported by GangMin Kim, if such packet is that may cause a UaF when the defrag engine later on tries to tuch again such packet." act_ct was never meant to be used in the egress path, however some users are attaching it to egress today [2]. Attempting to reach a middle ground, we noticed that, while most qdiscs are not handling TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we address the issue by only allowing act_ct to bind to clsact/ingress qdiscs and shared blocks. That way it's still possible to attach act_ct to egress (albeit only with clsact). [1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/ [2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/ Reported-by: GangMin Kim <km.kim1503@gmail.com> Fixes: 3f14b377d01d ("net/sched: act_ct: fix skb leak and crash on ooo frags") CC: stable@vger.kernel.org Signed-off-by: Victor Nogueira <victor@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20260225134349.1287037-1-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-13xdp: produce a warning when calculated tailroom is negativeLarysa Zaremba
[ Upstream commit 8821e857759be9db3cde337ad328b71fe5c8a55f ] Many ethernet drivers report xdp Rx queue frag size as being the same as DMA write size. However, the only user of this field, namely bpf_xdp_frags_increase_tail(), clearly expects a truesize. Such difference leads to unspecific memory corruption issues under certain circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses all DMA-writable space in 2 buffers. This would be fine, if only rxq->frag_size was properly set to 4K, but value of 3K results in a negative tailroom, because there is a non-zero page offset. We are supposed to return -EINVAL and be done with it in such case, but due to tailroom being stored as an unsigned int, it is reported to be somewhere near UINT_MAX, resulting in a tail being grown, even if the requested offset is too much (it is around 2K in the abovementioned test). This later leads to all kinds of unspecific calltraces. [ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6 [ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4 [ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000] [ 7340.339230] in xskxceiver[42b5,400000+69000] [ 7340.340300] likely on CPU 6 (core 0, socket 6) [ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe [ 7340.340888] likely on CPU 3 (core 0, socket 3) [ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7 [ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI [ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy) [ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014 [ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80 [ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89 [ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202 [ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010 [ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff [ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0 [ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0 [ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500 [ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000 [ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0 [ 7340.421237] PKRU: 55555554 [ 7340.421623] Call Trace: [ 7340.421987] <TASK> [ 7340.422309] ? softleaf_from_pte+0x77/0xa0 [ 7340.422855] swap_pte_batch+0xa7/0x290 [ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270 [ 7340.424102] zap_pte_range+0x281/0x580 [ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240 [ 7340.425177] unmap_page_range+0x24d/0x420 [ 7340.425714] unmap_vmas+0xa1/0x180 [ 7340.426185] exit_mmap+0xe1/0x3b0 [ 7340.426644] __mmput+0x41/0x150 [ 7340.427098] exit_mm+0xb1/0x110 [ 7340.427539] do_exit+0x1b2/0x460 [ 7340.427992] do_group_exit+0x2d/0xc0 [ 7340.428477] get_signal+0x79d/0x7e0 [ 7340.428957] arch_do_signal_or_restart+0x34/0x100 [ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0 [ 7340.430159] do_syscall_64+0x188/0x6b0 [ 7340.430672] ? __do_sys_clone3+0xd9/0x120 [ 7340.431212] ? switch_fpu_return+0x4e/0xd0 [ 7340.431761] ? arch_exit_to_user_mode_prepare.isra.0+0xa1/0xc0 [ 7340.432498] ? do_syscall_64+0xbb/0x6b0 [ 7340.433015] ? __handle_mm_fault+0x445/0x690 [ 7340.433582] ? count_memcg_events+0xd6/0x210 [ 7340.434151] ? handle_mm_fault+0x212/0x340 [ 7340.434697] ? do_user_addr_fault+0x2b4/0x7b0 [ 7340.435271] ? clear_bhb_loop+0x30/0x80 [ 7340.435788] ? clear_bhb_loop+0x30/0x80 [ 7340.436299] ? clear_bhb_loop+0x30/0x80 [ 7340.436812] ? clear_bhb_loop+0x30/0x80 [ 7340.437323] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 7340.437973] RIP: 0033:0x7f4161b14169 [ 7340.438468] Code: Unable to access opcode bytes at 0x7f4161b1413f. [ 7340.439242] RSP: 002b:00007ffc6ebfa770 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca [ 7340.440173] RAX: fffffffffffffe00 RBX: 00000000000005a1 RCX: 00007f4161b14169 [ 7340.441061] RDX: 00000000000005a1 RSI: 0000000000000109 RDI: 00007f415bfff990 [ 7340.441943] RBP: 00007ffc6ebfa7a0 R08: 0000000000000000 R09: 00000000ffffffff [ 7340.442824] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 7340.443707] R13: 0000000000000000 R14: 00007f415bfff990 R15: 00007f415bfff6c0 [ 7340.444586] </TASK> [ 7340.444922] Modules linked in: rfkill intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit libnvdimm kvm_intel vfat fat kvm snd_pcm irqbypass rapl iTCO_wdt snd_timer intel_pmc_bxt iTCO_vendor_support snd ixgbevf virtio_net soundcore i2c_i801 pcspkr libeth_xdp net_failover i2c_smbus lpc_ich failover libeth virtio_balloon joydev 9p fuse loop zram lz4hc_compress lz4_compress 9pnet_virtio 9pnet netfs ghash_clmulni_intel serio_raw qemu_fw_cfg [ 7340.449650] ---[ end trace 0000000000000000 ]--- The issue can be fixed in all in-tree drivers, but we cannot just trust OOT drivers to not do this. Therefore, make tailroom a signed int and produce a warning when it is negative to prevent such mistakes in the future. Fixes: bf25146a5595 ("bpf: add frags support to the bpf_xdp_adjust_tail() API") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://patch.msgid.link/20260305111253.2317394-10-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13xdp: use modulo operation to calculate XDP frag tailroomLarysa Zaremba
[ Upstream commit 88b6b7f7b216108a09887b074395fa7b751880b1 ] The current formula for calculating XDP tailroom in mbuf packets works only if each frag has its own page (if rxq->frag_size is PAGE_SIZE), this defeats the purpose of the parameter overall and without any indication leads to negative calculated tailroom on at least half of frags, if shared pages are used. There are not many drivers that set rxq->frag_size. Among them: * i40e and enetc always split page uniformly between frags, use shared pages * ice uses page_pool frags via libeth, those are power-of-2 and uniformly distributed across page * idpf has variable frag_size with XDP on, so current API is not applicable * mlx5, mtk and mvneta use PAGE_SIZE or 0 as frag_size for page_pool As for AF_XDP ZC, only ice, i40e and idpf declare frag_size for it. Modulo operation yields good results for aligned chunks, they are all power-of-2, between 2K and PAGE_SIZE. Formula without modulo fails when chunk_size is 2K. Buffers in unaligned mode are not distributed uniformly, so modulo operation would not work. To accommodate unaligned buffers, we could define frag_size as data + tailroom, and hence do not subtract offset when calculating tailroom, but this would necessitate more changes in the drivers. Define rxq->frag_size as an even portion of a page that fully belongs to a single frag. When calculating tailroom, locate the data start within such portion by performing a modulo operation on page offset. Fixes: bf25146a5595 ("bpf: add frags support to the bpf_xdp_adjust_tail() API") Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://patch.msgid.link/20260305111253.2317394-2-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13net/sched: act_ife: Fix metalist update behaviorJamal Hadi Salim
[ Upstream commit e2cedd400c3ec0302ffca2490e8751772906ac23 ] Whenever an ife action replace changes the metalist, instead of replacing the old data on the metalist, the current ife code is appending the new metadata. Aside from being innapropriate behavior, this may lead to an unbounded addition of metadata to the metalist which might cause an out of bounds error when running the encode op: [ 138.423369][ C1] ================================================================== [ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255 [ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full) [ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 138.425800][ C1] Call Trace: [ 138.425804][ C1] <IRQ> [ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122) [ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) [ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1)) [ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597) [ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1)) [ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2)) [ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171) [ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57) [ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114) [ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3)) [ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45) [ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879) To solve this issue, fix the replace behavior by adding the metalist to the ife rcu data structure. Fixes: aa9fd9a325d51 ("sched: act: ife: update parameters via rcu handling") Reported-by: Ruitong Liu <cnitlrt@gmail.com> Tested-by: Ruitong Liu <cnitlrt@gmail.com> Co-developed-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20260304140603.76500-1-jhs@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthopJiayuan Chen
[ Upstream commit 21ec92774d1536f71bdc90b0e3d052eff99cf093 ] When a standalone IPv6 nexthop object is created with a loopback device (e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies it as a reject route. This is because nexthop objects have no destination prefix (fc_dst=::), causing fib6_is_reject() to match any loopback nexthop. The reject path skips fib_nh_common_init(), leaving nhc_pcpu_rth_output unallocated. If an IPv4 route later references this nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and panics. Simplify the check in fib6_nh_init() to only match explicit reject routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback promotion heuristic in fib6_is_reject() is handled separately by ip6_route_info_create_nh(). After this change, the three cases behave as follows: 1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"): RTF_REJECT is set, enters reject path, skips fib_nh_common_init(). No behavior change. 2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"): RTF_REJECT is not set, takes normal path, fib_nh_common_init() is called. ip6_route_info_create_nh() still promotes it to reject afterward. nhc_pcpu_rth_output is allocated but unused, which is harmless. 3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"): RTF_REJECT is not set, takes normal path, fib_nh_common_init() is called. nhc_pcpu_rth_output is properly allocated, fixing the crash when IPv4 routes reference this nexthop. Suggested-by: Ido Schimmel <idosch@nvidia.com> Fixes: 493ced1ac47c ("ipv4: Allow routes to use nexthop objects") Reported-by: syzbot+334190e097a98a1b81bb@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/698f8482.a70a0220.2c38d7.00ca.GAE@google.com/T/ Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20260304113817.294966-2-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13net: bridge: fix nd_tbl NULL dereference when IPv6 is disabledFernando Fernandez Mancera
[ Upstream commit e5e890630533bdc15b26a34bb8e7ef539bdf1322 ] When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. Then, if neigh_suppress is enabled and an ICMPv6 Neighbor Discovery packet reaches the bridge, br_do_suppress_nd() will dereference ipv6_stub->nd_tbl which is NULL, passing it to neigh_lookup(). This causes a kernel NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000268 Oops: 0000 [#1] PREEMPT SMP NOPTI [...] RIP: 0010:neigh_lookup+0x16/0xe0 [...] Call Trace: <IRQ> ? neigh_lookup+0x16/0xe0 br_do_suppress_nd+0x160/0x290 [bridge] br_handle_frame_finish+0x500/0x620 [bridge] br_handle_frame+0x353/0x440 [bridge] __netif_receive_skb_core.constprop.0+0x298/0x1110 __netif_receive_skb_one_core+0x3d/0xa0 process_backlog+0xa0/0x140 __napi_poll+0x2c/0x170 net_rx_action+0x2c4/0x3a0 handle_softirqs+0xd0/0x270 do_softirq+0x3f/0x60 Fix this by replacing IS_ENABLED(IPV6) call with ipv6_mod_enabled() in the callers. This is in essence disabling NS/NA suppression when IPv6 is disabled. Fixes: ed842faeb2bd ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports") Reported-by: Guruprasad C P <gurucp2005@gmail.com> Closes: https://lore.kernel.org/netdev/CAHXs0ORzd62QOG-Fttqa2Cx_A_VFp=utE2H2VTX5nqfgs7LDxQ@mail.gmail.com/ Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20260304120357.9778-1-fmancera@suse.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13netfilter: nft_set_pipapo: split gc into unlink and reclaim phaseFlorian Westphal
[ Upstream commit 9df95785d3d8302f7c066050117b04cd3c2048c2 ] Yiming Qian reports Use-after-free in the pipapo set type: Under a large number of expired elements, commit-time GC can run for a very long time in a non-preemptible context, triggering soft lockup warnings and RCU stall reports (local denial of service). We must split GC in an unlink and a reclaim phase. We cannot queue elements for freeing until pointers have been swapped. Expired elements are still exposed to both the packet path and userspace dumpers via the live copy of the data structure. call_rcu() does not protect us: dump operations or element lookups starting after call_rcu has fired can still observe the free'd element, unless the commit phase has made enough progress to swap the clone and live pointers before any new reader has picked up the old version. This a similar approach as done recently for the rbtree backend in commit 35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert"). Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Reported-by: Yiming Qian <yimingqian591@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13nfc: rawsock: cancel tx_work before socket teardownJakub Kicinski
[ Upstream commit d793458c45df2aed498d7f74145eab7ee22d25aa ] In rawsock_release(), cancel any pending tx_work and purge the write queue before orphaning the socket. rawsock_tx_work runs on the system workqueue and calls nfc_data_exchange which dereferences the NCI device. Without synchronization, tx_work can race with socket and device teardown when a process is killed (e.g. by SIGKILL), leading to use-after-free or leaked references. Set SEND_SHUTDOWN first so that if tx_work is already running it will see the flag and skip transmitting, then use cancel_work_sync to wait for any in-progress execution to finish, and finally purge any remaining queued skbs. Fixes: 23b7869c0fd0 ("NFC: add the NFC socket raw protocol") Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20260303162346.2071888-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13nfc: nci: clear NCI_DATA_EXCHANGE before calling completion callbackJakub Kicinski
[ Upstream commit 0efdc02f4f6d52f8ca5d5889560f325a836ce0a8 ] Move clear_bit(NCI_DATA_EXCHANGE) before invoking the data exchange callback in nci_data_exchange_complete(). The callback (e.g. rawsock_data_exchange_complete) may immediately schedule another data exchange via schedule_work(tx_work). On a multi-CPU system, tx_work can run and reach nci_transceive() before the current nci_data_exchange_complete() clears the flag, causing test_and_set_bit(NCI_DATA_EXCHANGE) to return -EBUSY and the new transfer to fail. This causes intermittent flakes in nci/nci_dev in NIPA: # # RUN NCI.NCI1_0.t4t_tag_read ... # # t4t_tag_read: Test terminated by timeout # # FAIL NCI.NCI1_0.t4t_tag_read # not ok 3 NCI.NCI1_0.t4t_tag_read Fixes: 38f04c6b1b68 ("NFC: protect nci_data_exchange transactions") Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20260303162346.2071888-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13nfc: nci: free skb on nci_transceive early error pathsJakub Kicinski
[ Upstream commit 7bd4b0c4779f978a6528c9b7937d2ca18e936e2c ] nci_transceive() takes ownership of the skb passed by the caller, but the -EPROTO, -EINVAL, and -EBUSY error paths return without freeing it. Due to issues clearing NCI_DATA_EXCHANGE fixed by subsequent changes the nci/nci_dev selftest hits the error path occasionally in NIPA, and kmemleak detects leaks: unreferenced object 0xff11000015ce6a40 (size 640): comm "nci_dev", pid 3954, jiffies 4295441246 hex dump (first 32 bytes): 6b 6b 6b 6b 00 a4 00 0c 02 e1 03 6b 6b 6b 6b 6b kkkk.......kkkkk 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace (crc 7c40cc2a): kmem_cache_alloc_node_noprof+0x492/0x630 __alloc_skb+0x11e/0x5f0 alloc_skb_with_frags+0xc6/0x8f0 sock_alloc_send_pskb+0x326/0x3f0 nfc_alloc_send_skb+0x94/0x1d0 rawsock_sendmsg+0x162/0x4c0 do_syscall_64+0x117/0xfc0 Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation") Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20260303162346.2071888-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13net_sched: sch_fq: clear q->band_pkt_count[] in fq_reset()Eric Dumazet
[ Upstream commit a4c2b8be2e5329e7fac6e8f64ddcb8958155cfcb ] When/if a NIC resets, queues are deactivated by dev_deactivate_many(), then reactivated when the reset operation completes. fq_reset() removes all the skbs from various queues. If we do not clear q->band_pkt_count[], these counters keep growing and can eventually reach sch->limit, preventing new packets to be queued. Many thanks to Praveen for discovering the root cause. Fixes: 29f834aa326e ("net_sched: sch_fq: add 3 bands and WRR scheduling") Diagnosed-by: Praveen Kaligineedi <pkaligineedi@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260304015640.961780-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13net: nfc: nci: Fix zero-length proprietary notificationsIan Ray
[ Upstream commit f7d92f11bd33a6eb49c7c812255ef4ab13681f0f ] NCI NFC controllers may have proprietary OIDs with zero-length payload. One example is: drivers/nfc/nxp-nci/core.c, NXP_NCI_RF_TXLDO_ERROR_NTF. Allow a zero length payload in proprietary notifications *only*. Before: -- >8 -- kernel: nci: nci_recv_frame: len 3 -- >8 -- After: -- >8 -- kernel: nci: nci_recv_frame: len 3 kernel: nci: nci_ntf_packet: NCI RX: MT=ntf, PBF=0, GID=0x1, OID=0x23, plen=0 kernel: nci: nci_ntf_packet: unknown ntf opcode 0x123 kernel: nfc nfc0: NFC: RF transmitter couldn't start. Bad power and/or configuration? -- >8 -- After fixing the hardware: -- >8 -- kernel: nci: nci_recv_frame: len 27 kernel: nci: nci_ntf_packet: NCI RX: MT=ntf, PBF=0, GID=0x1, OID=0x5, plen=24 kernel: nci: nci_rf_intf_activated_ntf_packet: rf_discovery_id 1 -- >8 -- Fixes: d24b03535e5e ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet") Signed-off-by: Ian Ray <ian.ray@gehealthcare.com> Link: https://patch.msgid.link/20260302163238.140576-1-ian.ray@gehealthcare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13net: ipv4: fix ARM64 alignment fault in multipath hash seedYung Chih Su
[ Upstream commit 4ee7fa6cf78ff26d783d39e2949d14c4c1cd5e7f ] `struct sysctl_fib_multipath_hash_seed` contains two u32 fields (user_seed and mp_seed), making it an 8-byte structure with a 4-byte alignment requirement. In `fib_multipath_hash_from_keys()`, the code evaluates the entire struct atomically via `READ_ONCE()`: mp_seed = READ_ONCE(net->ipv4.sysctl_fib_multipath_hash_seed).mp_seed; While this silently works on GCC by falling back to unaligned regular loads which the ARM64 kernel tolerates, it causes a fatal kernel panic when compiled with Clang and LTO enabled. Commit e35123d83ee3 ("arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y") strengthens `READ_ONCE()` to use Load-Acquire instructions (`ldar` / `ldapr`) to prevent compiler reordering bugs under Clang LTO. Since the macro evaluates the full 8-byte struct, Clang emits a 64-bit `ldar` instruction. ARM64 architecture strictly requires `ldar` to be naturally aligned, thus executing it on a 4-byte aligned address triggers a strict Alignment Fault (FSC = 0x21). Fix the read side by moving the `READ_ONCE()` directly to the `u32` member, which emits a safe 32-bit `ldar Wn`. Furthermore, Eric Dumazet pointed out that `WRITE_ONCE()` on the entire struct in `proc_fib_multipath_hash_set_seed()` is also flawed. Analysis shows that Clang splits this 8-byte write into two separate 32-bit `str` instructions. While this avoids an alignment fault, it destroys atomicity and exposes a tear-write vulnerability. Fix this by explicitly splitting the write into two 32-bit `WRITE_ONCE()` operations. Finally, add the missing `READ_ONCE()` when reading `user_seed` in `proc_fib_multipath_hash_seed()` to ensure proper pairing and concurrency safety. Fixes: 4ee2a8cace3f ("net: ipv4: Add a sysctl to set multipath hash seed") Signed-off-by: Yung Chih Su <yuuchihsu@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260302060247.7066-1-yuuchihsu@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13ipv6: fix NULL pointer deref in ip6_rt_get_dev_rcu()Jakub Kicinski
[ Upstream commit 2ffb4f5c2ccb2fa1c049dd11899aee7967deef5a ] l3mdev_master_dev_rcu() can return NULL when the slave device is being un-slaved from a VRF. All other callers deal with this, but we lost the fallback to loopback in ip6_rt_pcpu_alloc() -> ip6_rt_get_dev_rcu() with commit 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address"). KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:ip6_rt_pcpu_alloc (net/ipv6/route.c:1418) Call Trace: ip6_pol_route (net/ipv6/route.c:2318) fib6_rule_lookup (net/ipv6/fib6_rules.c:115) ip6_route_output_flags (net/ipv6/route.c:2607) vrf_process_v6_outbound (drivers/net/vrf.c:437) I was tempted to rework the un-slaving code to clear the flag first and insert synchronize_rcu() before we remove the upper. But looks like the explicit fallback to loopback_dev is an established pattern. And I guess avoiding the synchronize_rcu() is nice, too. Fixes: 4832c30d5458 ("net: ipv6: put host and anycast routes on device with address") Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20260301194548.927324-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13net/rds: Fix circular locking dependency in rds_tcp_tuneAllison Henderson
[ Upstream commit 6a877ececd6daa002a9a0002cd0fbca6592a9244 ] syzbot reported a circular locking dependency in rds_tcp_tune() where sk_net_refcnt_upgrade() is called while holding the socket lock: ====================================================== WARNING: possible circular locking dependency detected ====================================================== kworker/u10:8/15040 is trying to acquire lock: ffffffff8e9aaf80 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc_cache_noprof+0x4b/0x6f0 but task is already holding lock: ffff88805a3c1ce0 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: rds_tcp_tune+0xd7/0x930 The issue occurs because sk_net_refcnt_upgrade() performs memory allocation (via get_net_track() -> ref_tracker_alloc()) while the socket lock is held, creating a circular dependency with fs_reclaim. Fix this by moving sk_net_refcnt_upgrade() outside the socket lock critical section. This is safe because the fields modified by the sk_net_refcnt_upgrade() call (sk_net_refcnt, ns_tracker) are not accessed by any concurrent code path at this point. v2: - Corrected fixes tag - check patch line wrap nits - ai commentary nits Reported-by: syzbot+2e2cf5331207053b8106@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2e2cf5331207053b8106 Fixes: 3a58f13a881e ("net: rds: acquire refcount on TCP sockets") Signed-off-by: Allison Henderson <achender@kernel.org> Link: https://patch.msgid.link/20260227202336.167757-1-achender@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13can: bcm: fix locking for bcm_op runtime updatesOliver Hartkopp
[ Upstream commit c35636e91e392e1540949bbc67932167cb48bc3a ] Commit c2aba69d0c36 ("can: bcm: add locking for bcm_op runtime updates") added a locking for some variables that can be modified at runtime when updating the sending bcm_op with a new TX_SETUP command in bcm_tx_setup(). Usually the RX_SETUP only handles and filters incoming traffic with one exception: When the RX_RTR_FRAME flag is set a predefined CAN frame is sent when a specific RTR frame is received. Therefore the rx bcm_op uses bcm_can_tx() which uses the bcm_tx_lock that was only initialized in bcm_tx_setup(). Add the missing spin_lock_init() when allocating the bcm_op in bcm_rx_setup() to handle the RTR case properly. Fixes: c2aba69d0c36 ("can: bcm: add locking for bcm_op runtime updates") Reported-by: syzbot+5b11eccc403dd1cea9f8@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-can/699466e4.a70a0220.2c38d7.00ff.GAE@google.com/ Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://patch.msgid.link/20260218-bcm_spin_lock_init-v1-1-592634c8a5b5@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13atm: lec: fix null-ptr-deref in lec_arp_clear_vccsJiayuan Chen
[ Upstream commit 101bacb303e89dc2e0640ae6a5e0fb97c4eb45bb ] syzkaller reported a null-ptr-deref in lec_arp_clear_vccs(). This issue can be easily reproduced using the syzkaller reproducer. In the ATM LANE (LAN Emulation) module, the same atm_vcc can be shared by multiple lec_arp_table entries (e.g., via entry->vcc or entry->recv_vcc). When the underlying VCC is closed, lec_vcc_close() iterates over all ARP entries and calls lec_arp_clear_vccs() for each matched entry. For example, when lec_vcc_close() iterates through the hlists in priv->lec_arp_empty_ones or other ARP tables: 1. In the first iteration, for the first matched ARP entry sharing the VCC, lec_arp_clear_vccs() frees the associated vpriv (which is vcc->user_back) and sets vcc->user_back to NULL. 2. In the second iteration, for the next matched ARP entry sharing the same VCC, lec_arp_clear_vccs() is called again. It obtains a NULL vpriv from vcc->user_back (via LEC_VCC_PRIV(vcc)) and then attempts to dereference it via `vcc->pop = vpriv->old_pop`, leading to a null-ptr-deref crash. Fix this by adding a null check for vpriv before dereferencing it. If vpriv is already NULL, it means the VCC has been cleared by a previous call, so we can safely skip the cleanup and just clear the entry's vcc/recv_vcc pointers. The entire cleanup block (including vcc_release_async()) is placed inside the vpriv guard because a NULL vpriv indicates the VCC has already been fully released by a prior iteration — repeating the teardown would redundantly set flags and trigger callbacks on an already-closing socket. The Fixes tag points to the initial commit because the entry->vcc path has been vulnerable since the original code. The entry->recv_vcc path was later added by commit 8d9f73c0ad2f ("atm: fix a memory leak of vcc->user_back") with the same pattern, and both paths are fixed here. Reported-by: syzbot+72e3ea390c305de0e259@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/68c95a83.050a0220.3c6139.0e5c.GAE@google.com/T/ Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com> Link: https://patch.msgid.link/20260225123250.189289-1-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13xsk: Fix zero-copy AF_XDP fragment dropNikhil P. Rao
[ Upstream commit f7387d6579d65efd490a864254101cb665f2e7a7 ] AF_XDP should ensure that only a complete packet is sent to application. In the zero-copy case, if the Rx queue gets full as fragments are being enqueued, the remaining fragments are dropped. For the multi-buffer case, add a check to ensure that the Rx queue has enough space for all fragments of a packet before starting to enqueue them. Fixes: 24ea50127ecf ("xsk: support mbuf on ZC RX") Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com> Link: https://patch.msgid.link/20260225000456.107806-3-nikhil.rao@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13xsk: Fix fragment node deletion to prevent buffer leakNikhil P. Rao
[ Upstream commit 60abb0ac11dccd6b98fd9182bc5f85b621688861 ] After commit b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node"), the list_node field is reused for both the xskb pool list and the buffer free list, this causes a buffer leak as described below. xp_free() checks if a buffer is already on the free list using list_empty(&xskb->list_node). When list_del() is used to remove a node from the xskb pool list, it doesn't reinitialize the node pointers. This means list_empty() will return false even after the node has been removed, causing xp_free() to incorrectly skip adding the buffer to the free list. Fix this by using list_del_init() instead of list_del() in all fragment handling paths, this ensures the list node is reinitialized after removal, allowing the list_empty() to work correctly. Fixes: b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node") Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com> Link: https://patch.msgid.link/20260225000456.107806-2-nikhil.rao@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: f7387d6579d6 ("xsk: Fix zero-copy AF_XDP fragment drop") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13xsk: s/free_list_node/list_node/Maciej Fijalkowski
[ Upstream commit 30ec2c1baaead43903ad63ff8e3083949059083c ] Now that free_list_node's purpose is two-folded, make it just a 'list_node'. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20241007122458.282590-3-maciej.fijalkowski@intel.com Stable-dep-of: f7387d6579d6 ("xsk: Fix zero-copy AF_XDP fragment drop") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13xsk: Get rid of xdp_buff_xsk::xskb_list_nodeMaciej Fijalkowski
[ Upstream commit b692bf9a7543af7ad11a59d182a3757578f0ba53 ] Let's bring xdp_buff_xsk back to occupying 2 cachelines by removing xskb_list_node - for the purpose of gathering the xskb frags free_list_node can be used, head of the list (xsk_buff_pool::xskb_list) stays as-is, just reuse the node ptr. It is safe to do as a single xdp_buff_xsk can never reside in two pool's lists simultaneously. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20241007122458.282590-2-maciej.fijalkowski@intel.com Stable-dep-of: f7387d6579d6 ("xsk: Fix zero-copy AF_XDP fragment drop") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13net/sched: ets: fix divide by zero in the offload pathDavide Caratti
commit e35626f610f3d2b7953ccddf6a77453da22b3a9e upstream. Offloading ETS requires computing each class' WRR weight: this is done by averaging over the sums of quanta as 'q_sum' and 'q_psum'. Using unsigned int, the same integer size as the individual DRR quanta, can overflow and even cause division by zero, like it happened in the following splat: Oops: divide error: 0000 [#1] SMP PTI CPU: 13 UID: 0 PID: 487 Comm: tc Tainted: G E 6.19.0-virtme #45 PREEMPT(full) Tainted: [E]=UNSIGNED_MODULE Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets] Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44 RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246 RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660 RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000 FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0 Call Trace: <TASK> ets_qdisc_change+0x870/0xf40 [sch_ets] qdisc_create+0x12b/0x540 tc_modify_qdisc+0x6d7/0xbd0 rtnetlink_rcv_msg+0x168/0x6b0 netlink_rcv_skb+0x5c/0x110 netlink_unicast+0x1d6/0x2b0 netlink_sendmsg+0x22e/0x470 ____sys_sendmsg+0x38a/0x3c0 ___sys_sendmsg+0x99/0xe0 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x111/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f440b81c77e Code: 4d 89 d8 e8 d4 bc 00 00 4c 8b 5d f8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 11 c9 c3 0f 1f 80 00 00 00 00 48 8b 45 10 0f 05 <c9> c3 83 e2 39 83 fa 08 75 e7 e8 13 ff ff ff 0f 1f 00 f3 0f 1e fa RSP: 002b:00007fff951e4c10 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000481820 RCX: 00007f440b81c77e RDX: 0000000000000000 RSI: 00007fff951e4cd0 RDI: 0000000000000003 RBP: 00007fff951e4c20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff951f4fa8 R13: 00000000699ddede R14: 00007f440bb01000 R15: 0000000000486980 </TASK> Modules linked in: sch_ets(E) netdevsim(E) ---[ end trace 0000000000000000 ]--- RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets] Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44 RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246 RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660 RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000 FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x30000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- Fix this using 64-bit integers for 'q_sum' and 'q_psum'. Cc: stable@vger.kernel.org Fixes: d35eb52bd2ac ("net: sch_ets: Make the ETS qdisc offloadable") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/28504887df314588c7255e9911769c36f751edee.1771964872.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-13wifi: mac80211: fix NULL pointer dereference in mesh_rx_csa_frame()Vahagn Vardanian
commit 017c1792525064a723971f0216e6ef86a8c7af11 upstream. In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced at lines 1638 and 1642 without a prior NULL check: ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl; ... pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value); The mesh_matches_local() check above only validates the Mesh ID, Mesh Configuration, and Supported Rates IEs. It does not verify the presence of the Mesh Channel Switch Parameters IE (element ID 118). When a received CSA action frame omits that IE, ieee802_11_parse_elems() leaves elems->mesh_chansw_params_ie as NULL, and the unconditional dereference causes a kernel NULL pointer dereference. A remote mesh peer with an established peer link (PLINK_ESTAB) can trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame that includes a matching Mesh ID and Mesh Configuration IE but omits the Mesh Channel Switch Parameters IE. No authentication beyond the default open mesh peering is required. Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim: BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211] CR2: 0000000000000000 Fix by adding a NULL check for mesh_chansw_params_ie after mesh_matches_local() returns, consistent with how other optional IEs are guarded throughout the mesh code. The bug has been present since v3.13 (released 2014-01-19). Fixes: 8f2535b92d68 ("mac80211: process the CSA frame for mesh accordingly") Cc: stable@vger.kernel.org Signed-off-by: Vahagn Vardanian <vahagn@redrays.io> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-13wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfigurationAriel Silver
commit 162d331d833dc73a3e905a24c44dd33732af1fc5 upstream. link_id is taken from the ML Reconfiguration element (control & 0x000f), so it can be 0..15. link_removal_timeout[] has IEEE80211_MLD_MAX_NUM_LINKS (15) elements, so index 15 is out-of-bounds. Skip subelements with link_id >= IEEE80211_MLD_MAX_NUM_LINKS to avoid a stack out-of-bounds write. Fixes: 8eb8dd2ffbbb ("wifi: mac80211: Support link removal using Reconfiguration ML element") Reported-by: Ariel Silver <arielsilver77@gmail.com> Signed-off-by: Ariel Silver <arielsilver77@gmail.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260220101129.1202657-1-Ariel.Silver@cybereason.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-13wifi: cfg80211: cancel rfkill_block work in wiphy_unregister()Daniil Dulov
commit 767d23ade706d5fa51c36168e92a9c5533c351a1 upstream. There is a use-after-free error in cfg80211_shutdown_all_interfaces found by syzkaller: BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220 Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326 CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: events cfg80211_rfkill_block_work Call Trace: <TASK> dump_stack_lvl+0x116/0x1f0 print_report+0xcd/0x630 kasan_report+0xe0/0x110 cfg80211_shutdown_all_interfaces+0x213/0x220 cfg80211_rfkill_block_work+0x1e/0x30 process_one_work+0x9cf/0x1b70 worker_thread+0x6c8/0xf10 kthread+0x3c5/0x780 ret_from_fork+0x56d/0x700 ret_from_fork_asm+0x1a/0x30 </TASK> The problem arises due to the rfkill_block work is not cancelled when wiphy is being unregistered. In order to fix the issue cancel the corresponding work in wiphy_unregister(). Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 1f87f7d3a3b4 ("cfg80211: add rfkill support") Cc: stable@vger.kernel.org Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru> Link: https://patch.msgid.link/20260211082024.1967588-1-d.dulov@aladdin.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-13wifi: radiotap: reject radiotap with unknown bitsJohannes Berg
commit c854758abe0b8d86f9c43dc060ff56a0ee5b31e0 upstream. The radiotap parser is currently only used with the radiotap namespace (not with vendor namespaces), but if the undefined field 18 is used, the alignment/size is unknown as well. In this case, iterator->_next_ns_data isn't initialized (it's only set for skipping vendor namespaces), and syzbot points out that we later compare against this uninitialized value. Fix this by moving the rejection of unknown radiotap fields down to after the in-namespace lookup, so it will really use iterator->_next_ns_data only for vendor namespaces, even in case undefined fields are present. Cc: stable@vger.kernel.org Fixes: 33e5a2f776e3 ("wireless: update radiotap parser") Reported-by: syzbot+b09c1af8764c0097bb19@syzkaller.appspotmail.com Closes: https://lore.kernel.org/r/69944a91.a70a0220.2c38d7.00fc.GAE@google.com Link: https://patch.msgid.link/20260217120526.162647-2-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-04net: nfc: nci: Fix parameter validation for packet dataMichael Thalmeier
[ Upstream commit 571dcbeb8e635182bb825ae758399831805693c2 ] Since commit 9c328f54741b ("net: nfc: nci: Add parameter validation for packet data") communication with nci nfc chips is not working any more. The mentioned commit tries to fix access of uninitialized data, but failed to understand that in some cases the data packet is of variable length and can therefore not be compared to the maximum packet length given by the sizeof(struct). Fixes: 9c328f54741b ("net: nfc: nci: Add parameter validation for packet data") Cc: stable@vger.kernel.org Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Reported-by: syzbot+740e04c2a93467a0f8c8@syzkaller.appspotmail.com Link: https://patch.msgid.link/20260218083000.301354-1-michael.thalmeier@hale.at Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04net/sched: act_skbedit: fix divide-by-zero in tcf_skbedit_hash()Ruitong Liu
[ Upstream commit be054cc66f739a9ba615dba9012a07fab8e7dd6f ] Commit 38a6f0865796 ("net: sched: support hash selecting tx queue") added SKBEDIT_F_TXQ_SKBHASH support. The inclusive range size is computed as: mapping_mod = queue_mapping_max - queue_mapping + 1; The range size can be 65536 when the requested range covers all possible u16 queue IDs (e.g. queue_mapping=0 and queue_mapping_max=U16_MAX). That value cannot be represented in a u16 and previously wrapped to 0, so tcf_skbedit_hash() could trigger a divide-by-zero: queue_mapping += skb_get_hash(skb) % params->mapping_mod; Compute mapping_mod in a wider type and reject ranges larger than U16_MAX to prevent params->mapping_mod from becoming 0 and avoid the crash. Fixes: 38a6f0865796 ("net: sched: support hash selecting tx queue") Cc: stable@vger.kernel.org # 6.12+ Signed-off-by: Ruitong Liu <cnitlrt@gmail.com> Link: https://patch.msgid.link/20260213175948.1505257-1-cnitlrt@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()Qanux
[ Upstream commit 6db8b56eed62baacaf37486e83378a72635c04cc ] On the receive path, __ioam6_fill_trace_data() uses trace->nodelen to decide how much data to write for each node. It trusts this field as-is from the incoming packet, with no consistency check against trace->type (the 24-bit field that tells which data items are present). A crafted packet can set nodelen=0 while setting type bits 0-21, causing the function to write ~100 bytes past the allocated region (into skb_shared_info), which corrupts adjacent heap memory and leads to a kernel panic. Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to derive the expected nodelen from the type field, and use it: - in ioam6_iptunnel.c (send path, existing validation) to replace the open-coded computation; - in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose nodelen is inconsistent with the type field, before any data is written. Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to 0xff1ffc00). Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace") Cc: stable@vger.kernel.org Signed-off-by: Junxi Qian <qjx1298677004@gmail.com> Reviewed-by: Justin Iurman <justin.iurman@gmail.com> Link: https://patch.msgid.link/20260211040412.86195-1-qjx1298677004@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04tipc: fix RCU dereference race in tipc_aead_users_dec()Daniel Hodges
[ Upstream commit 6a65c0cb0ff20b3cbc5f1c87b37dd22cdde14a1c ] tipc_aead_users_dec() calls rcu_dereference(aead) twice: once to store in 'tmp' for the NULL check, and again inside the atomic_add_unless() call. Use the already-dereferenced 'tmp' pointer consistently, matching the correct pattern used in tipc_aead_users_inc() and tipc_aead_users_set(). Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication") Cc: stable@vger.kernel.org Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Hodges <hodgesd@meta.com> Link: https://patch.msgid.link/20260203145621.17399-1-git@danielhodges.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04netfilter: nf_conntrack_h323: fix OOB read in decode_choice()Vahagn Vardanian
[ Upstream commit baed0d9ba91d4f390da12d5039128ee897253d60 ] In decode_choice(), the boundary check before get_len() uses the variable `len`, which is still 0 from its initialization at the top of the function: unsigned int type, ext, len = 0; ... if (ext || (son->attr & OPEN)) { BYTE_ALIGN(bs); if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here */ return H323_ERROR_BOUND; len = get_len(bs); /* OOB read */ When the bitstream is exactly consumed (bs->cur == bs->end), the check nf_h323_error_boundary(bs, 0, 0) evaluates to (bs->cur + 0 > bs->end), which is false. The subsequent get_len() call then dereferences *bs->cur++, reading 1 byte past the end of the buffer. If that byte has bit 7 set, get_len() reads a second byte as well. This can be triggered remotely by sending a crafted Q.931 SETUP message with a User-User Information Element containing exactly 2 bytes of PER-encoded data ({0x08, 0x00}) to port 1720 through a firewall with the nf_conntrack_h323 helper active. The decoder fully consumes the PER buffer before reaching this code path, resulting in a 1-2 byte heap-buffer-overflow read confirmed by AddressSanitizer. Fix this by checking for 2 bytes (the maximum that get_len() may read) instead of the uninitialized `len`. This matches the pattern used at every other get_len() call site in the same file, where the caller checks for 2 bytes of available data before calling get_len(). Fixes: ec8a8f3c31dd ("netfilter: nf_ct_h323: Extend nf_h323_error_boundary to work on bits as well") Signed-off-by: Vahagn Vardanian <vahagn@redrays.io> Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://patch.msgid.link/20260225130619.1248-2-fw@strlen.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04net: consume xmit errors of GSO framesJakub Kicinski
[ Upstream commit 7aa767d0d3d04e50ae94e770db7db8197f666970 ] udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests currently in NIPA. They fail in the same exact way, TCP GRO test stalls occasionally and the test gets killed after 10min. These tests use veth to simulate GRO. They attach a trivial ("return XDP_PASS;") XDP program to the veth to force TSO off and NAPI on. Digging into the failure mode we can see that the connection is completely stuck after a burst of drops. The sender's snd_nxt is at sequence number N [1], but the receiver claims to have received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle is that senders rtx queue is not empty (let's say the block in the rtx queue is at sequence number N - 4 * MSS [3]). In this state, sender sends a retransmission from the rtx queue with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3]. Receiver sees it and responds with an ACK all the way up to N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA because it has no recollection of ever sending data that far out [1]. And we are stuck. The root cause is the mess of the xmit return codes. veth returns an error when it can't xmit a frame. We end up with a loss event like this: ------------------------------------------------- | GSO super frame 1 | GSO super frame 2 | |-----------------------------------------------| | seg | seg | seg | seg | seg | seg | seg | seg | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ------------------------------------------------- x ok ok <ok>| ok ok ok <x> \\ snd_nxt "x" means packet lost by veth, and "ok" means it went thru. Since veth has TSO disabled in this test it sees individual segments. Segment 1 is on the retransmit queue and will be resent. So why did the sender not advance snd_nxt even tho it clearly did send up to seg 8? tcp_write_xmit() interprets the return code from the core to mean that data has not been sent at all. Since TCP deals with GSO super frames, not individual segment the crux of the problem is that loss of a single segment can be interpreted as loss of all. TCP only sees the last return code for the last segment of the GSO frame (in <> brackets in the diagram above). Of course for the problem to occur we need a setup or a device without a Qdisc. Otherwise Qdisc layer disconnects the protocol layer from the device errors completely. We have multiple ways to fix this. 1) make veth not return an error when it lost a packet. While this is what I think we did in the past, the issue keeps reappearing and it's annoying to debug. The game of whack a mole is not great. 2) fix the damn return codes We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the documentation, so maybe we should make the return code from ndo_start_xmit() a boolean. I like that the most, but perhaps some ancient, not-really-networking protocol would suffer. 3) make TCP ignore the errors It is not entirely clear to me what benefit TCP gets from interpreting the result of ip_queue_xmit()? Specifically once the connection is established and we're pushing data - packet loss is just packet loss? 4) this fix Ignore the rc in the Qdisc-less+GSO case, since it's unreliable. We already always return OK in the TCQ_F_CAN_BYPASS case. In the Qdisc-less case let's be a bit more conservative and only mask the GSO errors. This path is taken by non-IP-"networks" like CAN, MCTP etc, so we could regress some ancient thing. This is the simplest, but also maybe the hackiest fix? Similar fix has been proposed by Eric in the past but never committed because original reporter was working with an OOT driver and wasn't providing feedback (see Link). Link: https://lore.kernel.org/CANn89iJcLepEin7EtBETrZ36bjoD9LrR=k4cfwWh046GB+4f9A@mail.gmail.com Fixes: 1f59533f9ca5 ("qdisc: validate frames going through the direct_xmit path") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260223235100.108939-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04tipc: fix duplicate publication key in tipc_service_insert_publ()Tung Nguyen
[ Upstream commit 3aa677625c8fad39989496c51bcff3872c1f16f1 ] TIPC uses named table to store TIPC services represented by type and instance. Each time an application calls TIPC API bind() to bind a type/instance to a socket, an entry is created and inserted into the named table. It looks like this: named table: key1, entry1 (type, instance ...) key2, entry2 (type, instance ...) In the above table, each entry represents a route for sending data from one socket to the other. For all publications originated from the same node, the key is UNIQUE to identify each entry. It is calculated by this formula: key = socket portid + number of bindings + 1 (1) where: - socket portid: unique and calculated by using linux kernel function get_random_u32_below(). So, the value is randomized. - number of bindings: the number of times a type/instance pair is bound to a socket. This number is linearly increased, starting from 0. While the socket portid is unique and randomized by linux kernel, the linear increment of "number of bindings" in formula (1) makes "key" not unique anymore. For example: - Socket 1 is created with its associated port number 20062001. Type 1000, instance 1 is bound to socket 1: key1: 20062001 + 0 + 1 = 20062002 Then, bind() is called a second time on Socket 1 to by the same type 1000, instance 1: key2: 20062001 + 1 + 1 = 20062003 Named table: key1 (20062002), entry1 (1000, 1 ...) key2 (20062003), entry2 (1000, 1 ...) - Socket 2 is created with its associated port number 20062002. Type 1000, instance 1 is bound to socket 2: key3: 20062002 + 0 + 1 = 20062003 TIPC looks up the named table and finds out that key2 with the same value already exists and rejects the insertion into the named table. This leads to failure of bind() call from application on Socket 2 with error message EINVAL "Invalid argument". This commit fixes this issue by adding more port id checking to make sure that the key is unique to publications originated from the same port id and node. Fixes: 218527fe27ad ("tipc: replace name table service range array with rb tree") Signed-off-by: Tung Nguyen <tung.quang.nguyen@est.tech> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260220050541.237962-1-tung.quang.nguyen@est.tech Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04kcm: fix zero-frag skb in frag_list on partial sendmsg errorJiayuan Chen
[ Upstream commit ca220141fa8ebae09765a242076b2b77338106b0 ] Syzkaller reported a warning in kcm_write_msgs() when processing a message with a zero-fragment skb in the frag_list. When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb, it allocates a new skb (tskb) and links it into the frag_list before copying data. If the copy subsequently fails (e.g. -EFAULT from user memory), tskb remains in the frag_list with zero fragments: head skb (msg being assembled, NOT yet in sk_write_queue) +-----------+ | frags[17] | (MAX_SKB_FRAGS, all filled with data) | frag_list-+--> tskb +-----------+ +----------+ | frags[0] | (empty! copy failed before filling) +----------+ For SOCK_SEQPACKET with partial data already copied, the error path saves this message via partial_message for later completion. For SOCK_SEQPACKET, sock_write_iter() automatically sets MSG_EOR, so a subsequent zero-length write(fd, NULL, 0) completes the message and queues it to sk_write_queue. kcm_write_msgs() then walks the frag_list and hits: WARN_ON(!skb_shinfo(skb)->nr_frags) TCP has a similar pattern where skbs are enqueued before data copy and cleaned up on failure via tcp_remove_empty_skb(). KCM was missing the equivalent cleanup. Fix this by tracking the predecessor skb (frag_prev) when allocating a new frag_list entry. On error, if the tail skb has zero frags, use frag_prev to unlink and free it in O(1) without walking the singly-linked frag_list. frag_prev is safe to dereference because the entire message chain is only held locally (or in kcm->seq_skb) and is not added to sk_write_queue until MSG_EOR, so the send path cannot free it underneath us. Also change the WARN_ON to WARN_ON_ONCE to avoid flooding the log if the condition is somehow hit repeatedly. There are currently no KCM selftests in the kernel tree; a simple reproducer is available at [1]. [1] https://gist.github.com/mrpre/a94d431c757e8d6f168f4dd1a3749daa Reported-by: syzbot+52624bdfbf2746d37d70@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000269a1405a12fdc77@google.com/T/ Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com> Link: https://patch.msgid.link/20260219014256.370092-1-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04tls: Fix race condition in tls_sw_cancel_work_tx()Hyunwoo Kim
[ Upstream commit 7bb09315f93dce6acc54bf59e5a95ba7365c2be4 ] This issue was discovered during a code audit. After cancel_delayed_work_sync() is called from tls_sk_proto_close(), tx_work_handler() can still be scheduled from paths such as the Delayed ACK handler or ksoftirqd. As a result, the tx_work_handler() worker may dereference a freed TLS object. The following is a simple race scenario: cpu0 cpu1 tls_sk_proto_close() tls_sw_cancel_work_tx() tls_write_space() tls_sw_write_space() if (!test_and_set_bit(BIT_TX_SCHEDULED, &tx_ctx->tx_bitmask)) set_bit(BIT_TX_SCHEDULED, &ctx->tx_bitmask); cancel_delayed_work_sync(&ctx->tx_work.work); schedule_delayed_work(&tx_ctx->tx_work.work, 0); To prevent this race condition, cancel_delayed_work_sync() is replaced with disable_delayed_work_sync(). Fixes: f87e62d45e51 ("net/tls: remove close callback sock unlock/lock around TX work flush") Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://patch.msgid.link/aZgsFO6nfylfvLE7@v4bel Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQLuiz Augusto von Dentz
[ Upstream commit 138d7eca445ef37a0333425d269ee59900ca1104 ] This adds a check for encryption key size upon receiving L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which expects L2CAP_CR_LE_BAD_KEY_SIZE. Link: https://lore.kernel.org/linux-bluetooth/5782243.rdbgypaU67@n9w6sw14/ Fixes: 27e2d4c8d28b ("Bluetooth: Add basic LE L2CAP connect request receiving support") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04Bluetooth: L2CAP: Fix not checking output MTU is acceptable on ↵Luiz Augusto von Dentz
L2CAP_ECRED_CONN_REQ [ Upstream commit a8d1d73c81d1e70d2aa49fdaf59d933bb783ffe5 ] Upon receiving L2CAP_ECRED_CONN_REQ the given MTU shall be checked against the suggested MTU of the listening socket as that is required by the likes of PTS L2CAP/ECFC/BV-27-C test which expects L2CAP_CR_LE_UNACCEPT_PARAMS if the MTU is lowers than socket omtu. In order to be able to set chan->omtu the code now allows setting setsockopt(BT_SNDMTU), but it is only allowed when connection has not been stablished since there is no procedure to reconfigure the output MTU. Link: https://github.com/bluez/bluez/issues/1895 Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04Bluetooth: L2CAP: Fix response to L2CAP_ECRED_CONN_REQLuiz Augusto von Dentz
[ Upstream commit 05761c2c2b5bfec85c47f60c903c461e9b56cf87 ] Similar to 03dba9cea72f ("Bluetooth: L2CAP: Fix not responding with L2CAP_CR_LE_ENCRYPTION") the result code L2CAP_CR_LE_ENCRYPTION shall be used when BT_SECURITY_MEDIUM is set since that means security mode 2 which mean it doesn't require authentication which results in qualification test L2CAP/ECFC/BV-32-C failing. Link: https://github.com/bluez/bluez/issues/1871 Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04Bluetooth: L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too shortLuiz Augusto von Dentz
[ Upstream commit c28d2bff70444a85b3b86aaf241ece9408c7858c ] Test L2CAP/ECFC/BV-26-C expect the response to L2CAP_ECRED_CONN_REQ with and MTU value < L2CAP_ECRED_MIN_MTU (64) to be L2CAP_CR_LE_INVALID_PARAMS rather than L2CAP_CR_LE_UNACCEPT_PARAMS. Also fix not including the correct number of CIDs in the response since the spec requires all CIDs being rejected to be included in the response. Link: https://github.com/bluez/bluez/issues/1868 Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04Bluetooth: L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQLuiz Augusto von Dentz
[ Upstream commit 7accb1c4321acb617faf934af59d928b0b047e2b ] This fixes responding with an invalid result caused by checking the wrong size of CID which should have been (cmd_len - sizeof(*req)) and on top of it the wrong result was use L2CAP_CR_LE_INVALID_PARAMS which is invalid/reserved for reconf when running test like L2CAP/ECFC/BI-03-C: > ACL Data RX: Handle 64 flags 0x02 dlen 14 LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6 MTU: 64 MPS: 64 Source CID: 64 < ACL Data TX: Handle 64 flags 0x00 dlen 10 LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2 ! Result: Reserved (0x000c) Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003) Fiix L2CAP/ECFC/BI-04-C which expects L2CAP_RECONF_INVALID_MPS (0x0002) when more than one channel gets its MPS reduced: > ACL Data RX: Handle 64 flags 0x02 dlen 16 LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 8 MTU: 264 MPS: 99 Source CID: 64 ! Source CID: 65 < ACL Data TX: Handle 64 flags 0x00 dlen 10 LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2 ! Result: Reconfiguration successful (0x0000) Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002) Fix L2CAP/ECFC/BI-05-C when SCID is invalid (85 unconnected): > ACL Data RX: Handle 64 flags 0x02 dlen 14 LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6 MTU: 65 MPS: 64 ! Source CID: 85 < ACL Data TX: Handle 64 flags 0x00 dlen 10 LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2 ! Result: Reconfiguration successful (0x0000) Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003) Fix L2CAP/ECFC/BI-06-C when MPS < L2CAP_ECRED_MIN_MPS (64): > ACL Data RX: Handle 64 flags 0x02 dlen 14 LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6 MTU: 672 ! MPS: 63 Source CID: 64 < ACL Data TX: Handle 64 flags 0x00 dlen 10 LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2 ! Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002) Result: Reconfiguration failed - other unacceptable parameters (0x0004) Fix L2CAP/ECFC/BI-07-C when MPS reduced for more than one channel: > ACL Data RX: Handle 64 flags 0x02 dlen 16 LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 3 len 8 MTU: 84 ! MPS: 71 Source CID: 64 ! Source CID: 65 < ACL Data TX: Handle 64 flags 0x00 dlen 10 LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2 ! Result: Reconfiguration successful (0x0000) Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002) Link: https://github.com/bluez/bluez/issues/1865 Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04wifi: cfg80211: wext: fix IGTK key ID off-by-oneJohannes Berg
[ Upstream commit c8d7f21ead727485ebf965e2b4d42d4a4f0840f6 ] The IGTK key ID must be 4 or 5, but the code checks against key ID + 1, so must check against 5/6 rather than 4/5. Fix that. Reported-by: Jouni Malinen <j@w1.fi> Fixes: 08645126dd24 ("cfg80211: implement wext key handling") Link: https://patch.msgid.link/20260209181220.362205-2-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04espintcp: Fix race condition in espintcp_close()Hyunwoo Kim
[ Upstream commit e1512c1db9e8794d8d130addd2615ec27231d994 ] This issue was discovered during a code audit. After cancel_work_sync() is called from espintcp_close(), espintcp_tx_work() can still be scheduled from paths such as the Delayed ACK handler or ksoftirqd. As a result, the espintcp_tx_work() worker may dereference a freed espintcp ctx or sk. The following is a simple race scenario: cpu0 cpu1 espintcp_close() cancel_work_sync(&ctx->work); espintcp_write_space() schedule_work(&ctx->work); To prevent this race condition, cancel_work_sync() is replaced with disable_work_sync(). Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)") Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/aZSie7rEdh9Nu0eM@v4bel Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04xfrm: always flush state and policy upon NETDEV_UNREGISTER eventTetsuo Handa
[ Upstream commit 4efa91a28576054aae0e6dad9cba8fed8293aef8 ] syzbot is reporting that "struct xfrm_state" refcount is leaking. unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 2 ref_tracker: netdev@ffff888052f24618 has 1/1 users at __netdev_tracker_alloc include/linux/netdevice.h:4400 [inline] netdev_tracker_alloc include/linux/netdevice.h:4412 [inline] xfrm_dev_state_add+0x3a5/0x1080 net/xfrm/xfrm_device.c:316 xfrm_state_construct net/xfrm/xfrm_user.c:986 [inline] xfrm_add_sa+0x34ff/0x5fa0 net/xfrm/xfrm_user.c:1022 xfrm_user_rcv_msg+0x58e/0xc00 net/xfrm/xfrm_user.c:3507 netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2550 xfrm_netlink_rcv+0x71/0x90 net/xfrm/xfrm_user.c:3529 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x8c8/0xdd0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa5d/0xc30 net/socket.c:2592 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2646 __sys_sendmsg+0x16d/0x220 net/socket.c:2678 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f This is because commit d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API") implemented xfrm_dev_unregister() as no-op despite xfrm_dev_state_add() from xfrm_state_construct() acquires a reference to "struct net_device". I guess that that commit expected that NETDEV_DOWN event is fired before NETDEV_UNREGISTER event fires, and also assumed that xfrm_dev_state_add() is called only if (dev->features & NETIF_F_HW_ESP) != 0. Sabrina Dubroca identified steps to reproduce the same symptoms as below. echo 0 > /sys/bus/netdevsim/new_device dev=$(ls -1 /sys/bus/netdevsim/devices/netdevsim0/net/) ip xfrm state add src 192.168.13.1 dst 192.168.13.2 proto esp \ spi 0x1000 mode tunnel aead 'rfc4106(gcm(aes))' $key 128 \ offload crypto dev $dev dir out ethtool -K $dev esp-hw-offload off echo 0 > /sys/bus/netdevsim/del_device Like these steps indicate, the NETIF_F_HW_ESP bit can be cleared after xfrm_dev_state_add() acquired a reference to "struct net_device". Also, xfrm_dev_state_add() does not check for the NETIF_F_HW_ESP bit when acquiring a reference to "struct net_device". Commit 03891f820c21 ("xfrm: handle NETDEV_UNREGISTER for xfrm device") re-introduced the NETDEV_UNREGISTER event to xfrm_dev_event(), but that commit for unknown reason chose to share xfrm_dev_down() between the NETDEV_DOWN event and the NETDEV_UNREGISTER event. I guess that that commit missed the behavior in the previous paragraph. Therefore, we need to re-introduce xfrm_dev_unregister() in order to release the reference to "struct net_device" by unconditionally flushing state and policy. Reported-by: syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84 Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API") Cc: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04xfrm: skip templates check for packet offload tunnel modeLeon Romanovsky
[ Upstream commit 0a4524bc69882a4ddb235bb6b279597721bda197 ] In packet offload, hardware is responsible to check templates. The result of its operation is forwarded through secpath by relevant drivers. That secpath is actually removed in __xfrm_policy_check2(). In case packet is forwarded, this secpath is reset in RX, but pushed again to TX where policy is rechecked again against dummy secpath in xfrm_policy_ok(). Such situation causes to unexpected XfrmInTmplMismatch increase. As a solution, simply skip template mismatch check. Fixes: 600258d555f0 ("xfrm: delete intermediate secpath entry in packet offload mode") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04xfrm6: fix uninitialized saddr in xfrm6_get_saddr()Jiayuan Chen
[ Upstream commit 1799d8abeabc68ec05679292aaf6cba93b343c05 ] xfrm6_get_saddr() does not check the return value of ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable source address (returns -EADDRNOTAVAIL), saddr->in6 is left uninitialized, but xfrm6_get_saddr() still returns 0 (success). This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized address in xfrm_state_find(), triggering KMSAN warning: ===================================================== BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940 xfrm_state_find+0x2424/0xa940 xfrm_resolve_and_create_bundle+0x906/0x5a20 xfrm_lookup_with_ifid+0xcc0/0x3770 xfrm_lookup_route+0x63/0x2b0 ip_route_output_flow+0x1ce/0x270 udp_sendmsg+0x2ce1/0x3400 inet_sendmsg+0x1ef/0x2a0 __sock_sendmsg+0x278/0x3d0 __sys_sendto+0x593/0x720 __x64_sys_sendto+0x130/0x200 x64_sys_call+0x332b/0x3e70 do_syscall_64+0xd3/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable tmp.i.i created at: xfrm_resolve_and_create_bundle+0x3e3/0x5a20 xfrm_lookup_with_ifid+0xcc0/0x3770 ===================================================== Fix by checking the return value of ipv6_dev_get_saddr() and propagating the error. Fixes: a1e59abf8249 ("[XFRM]: Fix wildcard as tunnel source") Reported-by: syzbot+e136d86d34b42399a8b1@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/68bf1024.a70a0220.7a912.02c2.GAE@google.com/T/ Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com> Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04libceph: define and enforce CEPH_MAX_KEY_LENIlya Dryomov
[ Upstream commit ac431d597a9bdfc2ba6b314813f29a6ef2b4a3bf ] When decoding the key, verify that the key material would fit into a fixed-size buffer in process_auth_done() and generally has a sane length. The new CEPH_MAX_KEY_LEN check replaces the existing check for a key with no key material which is a) not universal since CEPH_CRYPTO_NONE has to be excluded and b) doesn't provide much value since a smaller than needed key is just as invalid as no key -- this has to be handled elsewhere anyway. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-049p/xen: protect xen_9pfs_front_free against concurrent callsStefano Stabellini
[ Upstream commit ce8ded2e61f47747e31eeefb44dc24a2160a7e32 ] The xenwatch thread can race with other back-end change notifications and call xen_9pfs_front_free() twice, hitting the observed general protection fault due to a double-free. Guard the teardown path so only one caller can release the front-end state at a time, preventing the crash. This is a fix for the following double-free: [ 27.052347] Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI [ 27.052357] CPU: 0 UID: 0 PID: 32 Comm: xenwatch Not tainted 6.18.0-02087-g51ab33fc0a8b-dirty #60 PREEMPT(none) [ 27.052363] RIP: e030:xen_9pfs_front_free+0x1d/0x150 [ 27.052368] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 41 55 41 54 55 48 89 fd 48 c7 c7 48 d0 92 85 53 e8 cb cb 05 00 48 8b 45 08 48 8b 55 00 <48> 3b 28 0f 85 f9 28 35 fe 48 3b 6a 08 0f 85 ef 28 35 fe 48 89 42 [ 27.052377] RSP: e02b:ffffc9004016fdd0 EFLAGS: 00010246 [ 27.052381] RAX: 6b6b6b6b6b6b6b6b RBX: ffff88800d66e400 RCX: 0000000000000000 [ 27.052385] RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000000 RDI: 0000000000000000 [ 27.052389] RBP: ffff88800a887040 R08: 0000000000000000 R09: 0000000000000000 [ 27.052393] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888009e46b68 [ 27.052397] R13: 0000000000000200 R14: 0000000000000000 R15: ffff88800a887040 [ 27.052404] FS: 0000000000000000(0000) GS:ffff88808ca57000(0000) knlGS:0000000000000000 [ 27.052408] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.052412] CR2: 00007f9714004360 CR3: 0000000004834000 CR4: 0000000000050660 [ 27.052418] Call Trace: [ 27.052420] <TASK> [ 27.052422] xen_9pfs_front_changed+0x5d5/0x720 [ 27.052426] ? xenbus_otherend_changed+0x72/0x140 [ 27.052430] ? __pfx_xenwatch_thread+0x10/0x10 [ 27.052434] xenwatch_thread+0x94/0x1c0 [ 27.052438] ? __pfx_autoremove_wake_function+0x10/0x10 [ 27.052442] kthread+0xf8/0x240 [ 27.052445] ? __pfx_kthread+0x10/0x10 [ 27.052449] ? __pfx_kthread+0x10/0x10 [ 27.052452] ret_from_fork+0x16b/0x1a0 [ 27.052456] ? __pfx_kthread+0x10/0x10 [ 27.052459] ret_from_fork_asm+0x1a/0x30 [ 27.052463] </TASK> [ 27.052465] Modules linked in: [ 27.052471] ---[ end trace 0000000000000000 ]--- Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com> Message-ID: <20260129230348.2390470-1-stefano.stabellini@amd.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04net/rds: Clear reconnect pending bitHåkon Bugge
[ Upstream commit b89fc7c2523b2b0750d91840f4e52521270d70ed ] When canceling the reconnect worker, care must be taken to reset the reconnect-pending bit. If the reconnect worker has not yet been scheduled before it is canceled, the reconnect-pending bit will stay on forever. Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Link: https://patch.msgid.link/20260203055723.1085751-6-achender@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04vmw_vsock: bypass false-positive Wnonnull warning with gcc-16Arnd Bergmann
[ Upstream commit e25dbf561e03c0c5e36228e3b8b784392819ce85 ] The gcc-16.0.1 snapshot produces a false-positive warning that turns into a build failure with CONFIG_WERROR: In file included from arch/x86/include/asm/string.h:6, from net/vmw_vsock/vmci_transport.c:10: In function 'vmci_transport_packet_init', inlined from '__vmci_transport_send_control_pkt.constprop' at net/vmw_vsock/vmci_transport.c:198:2: arch/x86/include/asm/string_32.h:150:25: error: argument 2 null where non-null expected because argument 3 is nonzero [-Werror=nonnull] 150 | #define memcpy(t, f, n) __builtin_memcpy(t, f, n) | ^~~~~~~~~~~~~~~~~~~~~~~~~ net/vmw_vsock/vmci_transport.c:164:17: note: in expansion of macro 'memcpy' 164 | memcpy(&pkt->u.wait, wait, sizeof(pkt->u.wait)); | ^~~~~~ arch/x86/include/asm/string_32.h:150:25: note: in a call to built-in function '__builtin_memcpy' net/vmw_vsock/vmci_transport.c:164:17: note: in expansion of macro 'memcpy' 164 | memcpy(&pkt->u.wait, wait, sizeof(pkt->u.wait)); | ^~~~~~ This seems relatively harmless, and it so far the only instance of this warning I have found. The __vmci_transport_send_control_pkt function is called either with wait=NULL or with one of the type values that pass 'wait' into memcpy() here, but not from the same caller. Replacing the memcpy with a struct assignment is otherwise the same but avoids the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Bryan Tan <bryan-bt.tan@broadcom.com> Link: https://patch.msgid.link/20260203163406.2636463-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04Bluetooth: hci_conn: use mod_delayed_work for active mode timeoutStefan Sørensen
[ Upstream commit 49d0901e260739de2fcc90c0c29f9e31e39a2d9b ] hci_conn_enter_active_mode() uses queue_delayed_work() with the intention that the work will run after the given timeout. However, queue_delayed_work() does nothing if the work is already queued, so depending on the link policy we may end up putting the connection into idle mode every hdev->idle_timeout ms. Use mod_delayed_work() instead so the work is queued if not already queued, and the timeout is updated otherwise. Signed-off-by: Stefan Sørensen <ssorensen@roku.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.51.0) at 2026-10-18 03:10:38 +0000