| Age | Commit message (Collapse) | Author |
|
Update the DAX zero range iomap iter handler to advance the iter
directly. Advance by the full length in the hole/unwritten case, or
otherwise advance incrementally in the zeroing loop. In either case,
return 0 or an error code for success or failure.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20250224144757.237706-7-bfoster@redhat.com
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
DAX read and write currently advances the iter after the
dax_iomap_iter() returns the number of bytes processed rather than
internally within the iter handler itself, as most other iomap
operations do. Push the advance down into dax_iomap_iter() and
update the function to return op status instead of bytes processed.
dax_iomap_iter() shortcuts reads from a hole or unwritten mapping by
directly zeroing the iov_iter, so advance the iomap_iter similarly
in that case.
The DAX processing loop can operate on a range slightly different
than defined by the iomap_iter depending on circumstances. For
example, a read may be truncated by inode size, a read or write
range can be increased due to page alignment, etc. Therefore, this
patch aims to retain as much of the existing logic as possible.
The loop control logic remains pos based, but is sampled from the
iomap_iter on each iteration after the advance instead of being
updated manually. Similarly, length is updated based on the output
of the advance instead of being updated manually. The advance itself
is based on the number of bytes transferred, which was previously
used to update the local copies of pos and length.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20250224144757.237706-6-bfoster@redhat.com
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
DAX reads and writes flow through dax_iomap_iter(), which has one or
more subtleties in terms of how it processes a range vs. what is
specified in the iomap_iter. To keep things simple and remove the
dependency on iomap_iter() advances, convert a positive return from
dax_iomap_iter() to the new advance and status return semantics. The
advance can be pushed further down in future patches.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20250224144757.237706-5-bfoster@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Update several of the remaining iomap operations to advance the iter
directly rather than via return value. This includes page faults,
fiemap, seek data/hole and swapfile activation.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20250224144757.237706-4-bfoster@redhat.com
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Update iomap direct I/O to advance the iter directly rather than via
iter.processed. Update each mapping type helper to advance based on
the amount of data processed and return success or failure.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20250224144757.237706-3-bfoster@redhat.com
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
iomap buffered read advances the iter via iter.processed. To
continue separating iter advance from return status, update
iomap_readpage_iter() to advance the iter instead of returning the
number of bytes processed. In turn, drop the offset parameter and
sample the updated iter->pos at the start of the function. Update
the callers to loop based on remaining length in the current
iteration instead of number of bytes processed.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20250224144757.237706-2-bfoster@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
strncpy() is deprecated for NUL-terminated destination buffers. Use
strscpy() instead and don't zero-initialize the param array.
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Running generic/751 on the for-next branch often results in a hang like
below. They are both stack by locking an extent. This suggests someone
forget to unlock an extent.
INFO: task kworker/u128:1:12 blocked for more than 323 seconds.
Not tainted 6.13.0-BTRFS-ZNS+ #503
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u128:1 state:D stack:0 pid:12 tgid:12 ppid:2 flags:0x00004000
Workqueue: btrfs-fixup btrfs_work_helper [btrfs]
Call Trace:
<TASK>
__schedule+0x534/0xdd0
schedule+0x39/0x140
__lock_extent+0x31b/0x380 [btrfs]
? __pfx_autoremove_wake_function+0x10/0x10
btrfs_writepage_fixup_worker+0xf1/0x3a0 [btrfs]
btrfs_work_helper+0xff/0x480 [btrfs]
? lock_release+0x178/0x2c0
process_one_work+0x1ee/0x570
? srso_return_thunk+0x5/0x5f
worker_thread+0x1d1/0x3b0
? __pfx_worker_thread+0x10/0x10
kthread+0x10b/0x230
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
INFO: task kworker/u134:0:184 blocked for more than 323 seconds.
Not tainted 6.13.0-BTRFS-ZNS+ #503
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u134:0 state:D stack:0 pid:184 tgid:184 ppid:2 flags:0x00004000
Workqueue: writeback wb_workfn (flush-btrfs-4)
Call Trace:
<TASK>
__schedule+0x534/0xdd0
schedule+0x39/0x140
__lock_extent+0x31b/0x380 [btrfs]
? __pfx_autoremove_wake_function+0x10/0x10
find_lock_delalloc_range+0xdb/0x260 [btrfs]
writepage_delalloc+0x12f/0x500 [btrfs]
? srso_return_thunk+0x5/0x5f
extent_write_cache_pages+0x232/0x840 [btrfs]
btrfs_writepages+0x72/0x130 [btrfs]
do_writepages+0xe7/0x260
? srso_return_thunk+0x5/0x5f
? lock_acquire+0xd2/0x300
? srso_return_thunk+0x5/0x5f
? find_held_lock+0x2b/0x80
? wbc_attach_and_unlock_inode.part.0+0x102/0x250
? wbc_attach_and_unlock_inode.part.0+0x102/0x250
__writeback_single_inode+0x5c/0x4b0
writeback_sb_inodes+0x22d/0x550
__writeback_inodes_wb+0x4c/0xe0
wb_writeback+0x2f6/0x3f0
wb_workfn+0x32a/0x510
process_one_work+0x1ee/0x570
? srso_return_thunk+0x5/0x5f
worker_thread+0x1d1/0x3b0
? __pfx_worker_thread+0x10/0x10
kthread+0x10b/0x230
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
This happens because we have another success path for the zoned mode. When
there is no active zone available, btrfs_reserve_extent() returns
-EAGAIN. In this case, we have two reactions.
(1) If the given range is never allocated, we can only wait for someone
to finish a zone, so wait on BTRFS_FS_NEED_ZONE_FINISH bit and retry
afterward.
(2) Or, if some allocations are already done, we must bail out and let
the caller to send IOs for the allocation. This is because these IOs
may be necessary to finish a zone.
The commit 06f364284794 ("btrfs: do proper folio cleanup when
cow_file_range() failed") moved the unlock code from the inside of the
loop to the outside. So, previously, the allocated extents are unlocked
just after the allocation and so before returning from the function.
However, they are no longer unlocked on the case (2) above. That caused
the hang issue.
Fix the issue by modifying the 'end' to the end of the allocated
range. Then, we can exit the loop and the same unlock code can properly
handle the case.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Fixes: 06f364284794 ("btrfs: do proper folio cleanup when cow_file_range() failed")
CC: stable@vger.kernel.org
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix cifs_readv_callback() to call netfs_read_subreq_terminated() rather
than queuing the subrequest work item (which is unset). Also call the
I/O progress tracepoint.
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item")
Reported-by: Jean-Christophe Guillain <jean-christophe@guillain.net>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219793
Tested-by: Jean-Christophe Guillain <jean-christophe@guillain.net>
Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
commit b530104f50e8 ("lsm: lsm_context in security_dentry_init_security")
did not preserve the lsm id for subsequent release calls, which results
in a memory leak. Fix it by saving the lsm id in the nfs4_label and
providing it on the subsequent release call.
Fixes: b530104f50e8 ("lsm: lsm_context in security_dentry_init_security")
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- extent map shrinker fixes:
- fix potential use after free accessing an inode to reach fs_info,
the shrinker could do iput() in the meantime
- skip unnecessary scanning of inodes without extent maps
- do direct iput(), no need for indirection via workqueue
- in block < page mode, fix race when extending i_size in buffered mode
- fix minor memory leak in selftests
- print descriptive error message when seeding device is not found
* tag 'for-6.14-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix data overwriting bug during buffered write when block size < page size
btrfs: output an error message if btrfs failed to find the seed fsid
btrfs: do regular iput instead of delayed iput during extent map shrinking
btrfs: skip inodes without loaded extent maps when shrinking extent maps
btrfs: fix use-after-free on inode when scanning root during em shrinking
btrfs: selftests: fix btrfs_test_delayed_refs() leak of transaction
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Use __readahead_folio() in fuse again to fix a UAF issue
when using splice
- Remove d_op->d_delete method from pidfs
- Remove d_op->d_delete method from nsfs
- Simplify iomap_dio_bio_iter()
- Fix a UAF in ovl_dentry_update_reval
- Fix a miscalulated file range for filemap_fdatawrite_range_kick()
- Don't skip skip dirty page in folio_unmap_invalidate()
* tag 'vfs-6.14-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: Minor code simplification in iomap_dio_bio_iter()
nsfs: remove d_op->d_delete
pidfs: remove d_op->d_delete
mm/truncate: don't skip dirty page in folio_unmap_invalidate()
mm/filemap: fix miscalculated file range for filemap_fdatawrite_range_kick()
fuse: don't truncate cached, mutated symlink
ovl: fix UAF in ovl_dentry_update_reval by moving dput() in ovl_link_up
fuse: revert back to __readahead_folio() for readahead
|
|
xfs_buf_stale already set b_lru_ref to 0, and thus prevents the buffer
from moving to the LRU. Remove the duplicate check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The buffer cache keeps a bt_io_count per-CPU counter to track all
in-flight I/O, which is used to ensure no I/O is in flight when
unmounting the file system.
For most I/O we already keep track of inflight I/O at higher levels:
- for synchronous I/O (xfs_buf_read/xfs_bwrite/xfs_buf_delwri_submit),
the caller has a reference and waits for I/O completions using
xfs_buf_iowait
- for xfs_buf_delwri_submit_nowait the only caller (AIL writeback)
tracks the log items that the buffer attached to
This only leaves only xfs_buf_readahead_map as a submitter of
asynchronous I/O that is not tracked by anything else. Replace the
bt_io_count per-cpu counter with a more specific bt_readahead_count
counter only tracking readahead I/O. This allows to simply increment
it when submitting readahead I/O and decrementing it when it completed,
and thus simplify xfs_buf_rele and remove the needed for the
XBF_NO_IOACCT flags and the XFS_BSTATE_IN_FLIGHT buffer state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
xfs_buf_readahead_map is the only caller of xfs_buf_read_map and thus
_xfs_buf_read that is not synchronous. Split it from xfs_buf_read_map
so that the asynchronous path is self-contained and the now purely
synchronous xfs_buf_read_map / _xfs_buf_read implementation can be
simplified.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Currently all metadata I/O completions happen in the m_buf_workqueue
workqueue. But for synchronous I/O (i.e. all buffer reads) there is no
need for that, as there always is a called in process context that is
waiting for the I/O. Factor out the guts of xfs_buf_ioend into a
separate helper and call it from xfs_buf_iowait to avoid a double
an extra context switch to the workqueue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Combine 'else' and 'if' conditional statements onto a single line and drop
unrequired braces, as is standard coding style.
The code had been like this since commit c3b0e880bbfa ("iomap: support
REQ_OP_ZONE_APPEND").
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250224154538.548028-1-john.g.garry@oracle.com
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Commit 987f20a9dcce ("a.out: Remove the a.out implementation") removed
the last in-tree user of the loader field, and as far as I can tell, it
was the only one historically.
Signed-off-by: Yonatan Goldschmidt <yon.goldschmidt@gmail.com>
Link: https://lore.kernel.org/r/20250223223234.13764-1-yon.goldschmidt@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The sorting of VMAs by size in commit 7d442a33bfe8 ("binfmt_elf: Dump
smaller VMAs first in ELF cores") breaks elfutils[1]. Instead, sort
based on the setting of the new sysctl, core_sort_vma, which defaults
to 0, no sorting.
Reported-by: Michael Stapelberg <michael@stapelberg.ch>
Closes: https://lore.kernel.org/all/20250218085407.61126-1-michael@stapelberg.de/ [1]
Fixes: 7d442a33bfe8 ("binfmt_elf: Dump smaller VMAs first in ELF cores")
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Rather than send a NULL sb to ext2_msg, which omits the s_id from
messages, create a new ext2_msg_fc which is able to provide this
information from the filesystem context *fc when parsing.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250223201014.7541-3-sandeen@redhat.com
|
|
Convert ext2 to the new mount API.
Note that this makes the sb= option more accepting than it was before;
previosly, sb= was only accepted if it was the first specified option.
Now it can exist anywhere, and if respecified, the last specified value
is used.
Parse-time messages here are sent to ext2_msg with a NULL sb, and
ext2_msg is adjusted to accept that, as ext4 does today as well.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250223201014.7541-2-sandeen@redhat.com
|
|
Now that buffer-heads has been converted over to support large folios
we can remove the built-in VM_BUG_ON_FOLIO() checks which prevents
their use.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20250221223823.1680616-6-mcgrof@kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert mpage to folios and adjust accounting for the number of blocks
within a folio instead of a single page. This also adjusts the number
of pages we should process to be the size of the folio to ensure we
always read a full folio.
Note that the page cache code already ensures do_mpage_readpage() will
work with folios respecting the address space min order, this ensures
that so long as folio_size() is used for our requirements mpage will
also now be able to process block sizes larger than the page size.
Originally-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20250221223823.1680616-5-mcgrof@kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
For large blocksizes the number of block bits is larger than PAGE_SHIFT,
so calculate the sector number from the byte offset instead. This is
required to enable large folios with buffer-heads.
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Link: https://lore.kernel.org/r/20250221223823.1680616-4-mcgrof@kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
block_read_full_folio() currently puts all !uptodate buffers into
an array allocated on the stack, then iterates over it twice, first
locking the buffers and then submitting them for read. We want to
remove this array because it occupies too much stack space on
configurations with a larger PAGE_SIZE (eg 512 bytes with 8 byte
pointers and a 64KiB PAGE_SIZE).
We cannot simply submit buffer heads as we find them as the completion
handler needs to be able to tell when all reads are finished, so it can
end the folio read. So we keep one buffer in reserve (using the 'prev'
variable) until the end of the function.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20250221223823.1680616-3-mcgrof@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When we read over all buffers in a folio we currently use the
buffer index on the folio and blocksize to get the offset. Simplify
this with bh_offset(). This simplifies the loop while making no
functional changes.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20250221223823.1680616-2-mcgrof@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Nsfs only deals with unhashed dentries and there's currently no way for
them to become hashed. So remove d_op->d_delete.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pidfs only deals with unhashed dentries and there's currently no way for
them to become hashed. So remove d_op->d_delete.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
syzbot reports an issue that turns out to be caused by the fact that the
efivarfs PM notifier may be invoked before the efivarfs_fs_info::sb
field is populated, resulting in a NULL deference.
So defer the registration until efivarfs_fill_super() is invoked.
Reported-by: syzbot+00d13e505ef530a45100@syzkaller.appspotmail.com
Tested-by: syzbot+00d13e505ef530a45100@syzkaller.appspotmail.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Give an afs_server object a ref on the afs_cell object it points to so that
the cell doesn't get deleted before the server record.
Whilst this is circular (cell -> vol -> server_list -> server -> cell), the
ref only pins the memory, not the lifetime as that's controlled by the
activity counter. When the volume's activity counter reaches 0, it
detaches from the cell and discards its server list; when a cell's activity
counter reaches 0, it discards its root volume. At that point, the
circularity is cut.
Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250218192250.296870-6-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When allocating and building an afs_server_list struct object from a VLDB
record, we look up each server address to get the server record for it -
but a server may have more than one entry in the record and we discard the
duplicate pointers. Currently, however, when we discard, we only put a
server record, not unuse it - but the lookup got as an active-user count.
The active-user count on an afs_server_list object determines its lifetime
whereas the refcount keeps the memory backing it around. Failing to reduce
the active-user counter prevents the record from being cleaned up and can
lead to multiple copied being seen - and pointing to deleted afs_cell
objects and other such things.
Fix this by switching the incorrect 'put' to an 'unuse' instead.
Without this, occasionally, a dead server record can be seen in
/proc/net/afs/servers and list corruption may be observed:
list_del corruption. prev->next should be ffff888102423e40, but was 0000000000000000. (prev=ffff88810140cd38)
Fixes: 977e5f8ed0ab ("afs: Split the usage count on struct afs_server")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250218192250.296870-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Al Viro pointed out that dput() might sleep and must not be invoked
within an RCU section.
Keep only find_next_ancestor() winthin the RCU section.
Correct the wording in the comment.
Fixes: 6ef5b6fae3040 ("kernfs: Drop kernfs_rwsem while invoking lookup_positive_unlocked().")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250221084232.xksA_IQ4@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since 2002 (change "Replace BKL for chain locking with sysvfs-private
rwlock") the sysv filesystem was doing IO under a rwlock in its
get_block() function (yes, a non-sleepable lock hold over a function
used to read inode metadata for all reads and writes). Nobody noticed
until syzbot in 2023 [1]. This shows nobody is using the filesystem.
Just drop it.
[1] https://lore.kernel.org/all/0000000000000ccf9a05ee84f5b0@google.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20250220163940.10155-2-jack@suse.cz
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The former is a no-op wrapper with the same argument.
I left it in place to not lose the information who needs it -- one day
"pseudo" inodes may start differing from what alloc_inode() returns.
In the meantime no point taking a detour.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250212180459.1022983-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Before 2011 there was no meaningful synchronization between
read/readdir/write/seek. Only in commit
ef3d0fd27e90 ("vfs: do (nearly) lockless generic_file_llseek")
synchronization was added for SEEK_CUR by taking f_lock around
vfs_setpos().
Then in 2014 full synchronization between read/readdir/write/seek was
added in commit 9c225f2655e3 ("vfs: atomic f_pos accesses as per POSIX")
by introducing f_pos_lock for regular files with FMODE_ATOMIC_POS and
for directories. At that point taking f_lock became unnecessary for such
files.
So only acquire f_lock for SEEK_CUR if this isn't a file that would have
acquired f_pos_lock if necessary.
Link: https://lore.kernel.org/r/20250207-daten-mahlzeit-99d2079864fb@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
It is merely a trivial wrapper around getname_flags which adds a zeroed
argument, no point paying for an extra call.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250206000105.432528-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix the return type of several functions from long to int to match its actu
al behavior. These functions only return int values. This change improves
type consistency across the filesystem code and aligns the function signatu
re with its existing implementation and usage.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yuichiro Tsuji <yuichtsu@amazon.com>
Link: https://lore.kernel.org/r/20250121070844.4413-3-yuichtsu@amazon.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix the return type of several functions from long to int to match its actu
al behavior. These functions only return int values. This change improves
type consistency across the filesystem code and aligns the function signatu
re with its existing implementation and usage.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yuichiro Tsuji <yuichtsu@amazon.com>
Link: https://lore.kernel.org/r/20250121070844.4413-2-yuichtsu@amazon.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Dumping processes with large allocated and mostly not-faulted areas is
very slow.
Borrowing a test case from Tavian Barnes:
int main(void) {
char *mem = mmap(NULL, 1ULL << 40, PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_NORESERVE | MAP_PRIVATE, -1, 0);
printf("%p %m\n", mem);
if (mem != MAP_FAILED) {
mem[0] = 1;
}
abort();
}
That's 1TB of almost completely not-populated area.
On my test box it takes 13-14 seconds to dump.
The profile shows:
- 99.89% 0.00% a.out
entry_SYSCALL_64_after_hwframe
do_syscall_64
syscall_exit_to_user_mode
arch_do_signal_or_restart
- get_signal
- 99.89% do_coredump
- 99.88% elf_core_dump
- dump_user_range
- 98.12% get_dump_page
- 64.19% __get_user_pages
- 40.92% gup_vma_lookup
- find_vma
- mt_find
4.21% __rcu_read_lock
1.33% __rcu_read_unlock
- 3.14% check_vma_flags
0.68% vma_is_secretmem
0.61% __cond_resched
0.60% vma_pgtable_walk_end
0.59% vma_pgtable_walk_begin
0.58% no_page_table
- 15.13% down_read_killable
0.69% __cond_resched
13.84% up_read
0.58% __cond_resched
Almost 29% of the time is spent relocking the mmap semaphore between
calls to get_dump_page() which find nothing.
Whacking that results in times of 10 seconds (down from 13-14).
While here make the thing killable.
The real problem is the page-sized iteration and the real fix would
patch it up instead. It is left as an exercise for the mm-familiar
reader.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250119103205.2172432-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
["fallen through the cracks" misc stuff]
A bunch of anon_inode_getfile() callers follow it with adjusting
->f_mode; we have a helper doing that now, so let's make use
of it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20250118014434.GT1977892@ZenIV
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250209185523.745956-3-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Small collection of macros taken from mmdebug.h
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250209185523.745956-2-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
size
[BUG]
When running generic/418 with a btrfs whose block size < page size
(subpage cases), it always fails.
And the following minimal reproducer is more than enough to trigger it
reliably:
workload()
{
mkfs.btrfs -s 4k -f $dev > /dev/null
dmesg -C
mount $dev $mnt
$fsstree_dir/src/dio-invalidate-cache -r -b 4096 -n 3 -i 1 -f $mnt/diotest
ret=$?
umount $mnt
stop_trace
if [ $ret -ne 0 ]; then
fail
fi
}
for (( i = 0; i < 1024; i++)); do
echo "=== $i/$runtime ==="
workload
done
[CAUSE]
With extra trace printk added to the following functions:
- btrfs_buffered_write()
* Which folio is touched
* The file offset (start) where the buffered write is at
* How many bytes are copied
* The content of the write (the first 2 bytes)
- submit_one_sector()
* Which folio is touched
* The position inside the folio
* The content of the page cache (the first 2 bytes)
- pagecache_isize_extended()
* The parameters of the function itself
* The parameters of the folio_zero_range()
Which are enough to show the problem:
22.158114: btrfs_buffered_write: folio pos=0 start=0 copied=4096 content=0x0101
22.158161: submit_one_sector: r/i=5/257 folio=0 pos=0 content=0x0101
22.158609: btrfs_buffered_write: folio pos=0 start=4096 copied=4096 content=0x0101
22.158634: btrfs_buffered_write: folio pos=0 start=8192 copied=4096 content=0x0101
22.158650: pagecache_isize_extended: folio=0 from=4096 to=8192 bsize=4096 zero off=4096 len=8192
22.158682: submit_one_sector: r/i=5/257 folio=0 pos=4096 content=0x0000
22.158686: submit_one_sector: r/i=5/257 folio=0 pos=8192 content=0x0101
The tool dio-invalidate-cache will start 3 threads, each doing a buffered
write with 0x01 at offset 0, 4096 and 8192, do a fsync, then do a direct read,
and compare the read buffer with the write buffer.
Note that all 3 btrfs_buffered_write() are writing the correct 0x01 into
the page cache.
But at submit_one_sector(), at file offset 4096, the content is zeroed
out, by pagecache_isize_extended().
The race happens like this:
Thread A is writing into range [4K, 8K).
Thread B is writing into range [8K, 12k).
Thread A | Thread B
-------------------------------------+------------------------------------
btrfs_buffered_write() | btrfs_buffered_write()
|- old_isize = 4K; | |- old_isize = 4096;
|- btrfs_inode_lock() | |
|- write into folio range [4K, 8K) | |
|- pagecache_isize_extended() | |
| extend isize from 4096 to 8192 | |
| no folio_zero_range() called | |
|- btrfs_inode_lock() | |
| |- btrfs_inode_lock()
| |- write into folio range [8K, 12K)
| |- pagecache_isize_extended()
| | calling folio_zero_range(4K, 8K)
| | This is caused by the old_isize is
| | grabbed too early, without any
| | inode lock.
| |- btrfs_inode_unlock()
The @old_isize is grabbed without inode lock, causing race between two
buffered write threads and making pagecache_isize_extended() to zero
range which is still containing cached data.
And this is only affecting subpage btrfs, because for regular blocksize
== page size case, the function pagecache_isize_extended() will do
nothing if the block size >= page size.
[FIX]
Grab the old i_size while holding the inode lock.
This means each buffered write thread will have a stable view of the
old inode size, thus avoid the above race.
CC: stable@vger.kernel.org # 5.15+
Fixes: 5e8b9ef30392 ("btrfs: move pos increment and pagecache extension to btrfs_buffered_write")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
If btrfs failed to locate the seed device for whatever reason, mounting
the sprouted device will fail without any meaning error message:
# mkfs.btrfs -f /dev/test/scratch1
# btrfstune -S1 /dev/test/scratch1
# mount /dev/test/scratch1 /mnt/btrfs
# btrfs dev add -f /dev/test/scratch2 /mnt/btrfs
# umount /mnt/btrfs
# btrfs dev scan -u
# btrfs mount /dev/test/scratch2 /mnt/btrfs
mount: /mnt/btrfs: fsconfig system call failed: No such file or directory.
dmesg(1) may have more information after failed mount system call.
# dmesg -t | tail -n6
BTRFS info (device dm-5): first mount of filesystem 64252ded-5953-4868-b962-cea48f7ac4ea
BTRFS info (device dm-5): using crc32c (crc32c-generic) checksum algorithm
BTRFS info (device dm-5): using free-space-tree
BTRFS error (device dm-5): failed to read chunk tree: -2
BTRFS error (device dm-5): open_ctree failed: -2
[CAUSE]
The failure to mount is pretty straight forward, just unable to find the
seed device and its fsid, caused by `btrfs dev scan -u`.
But the lack of any useful info is a problem.
[FIX]
Just add an extra error message in open_seed_devices() to indicate the
error.
Now the error message would look like this:
BTRFS info (device dm-4): first mount of filesystem 7769223d-4db1-4e4c-ac29-0a96f53576ab
BTRFS info (device dm-4): using crc32c (crc32c-generic) checksum algorithm
BTRFS info (device dm-4): using free-space-tree
BTRFS error (device dm-4): failed to find fsid e87c12e6-584b-4e98-8b88-962c33a619ff when attempting to open seed devices
BTRFS error (device dm-4): failed to read chunk tree: -2
BTRFS error (device dm-4): open_ctree failed: -2
Link: https://github.com/kdave/btrfs-progs/issues/959
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The extent map shrinker now runs in the system unbound workqueue and no
longer in kswapd context so it can directly do an iput() on inodes even
if that blocks or needs to acquire any lock (we aren't holding any locks
when requesting the delayed iput from the shrinker). So we don't need to
add a delayed iput, wake up the cleaner and delegate the iput() to the
cleaner, which also adds extra contention on the spinlock that protects
the delayed iputs list.
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Tested-by: Ivan Shapovalov <intelfx@intelfx.name>
Link: https://lore.kernel.org/linux-btrfs/0414d690ac5680d0d77dfc930606cdc36e42e12f.camel@intelfx.name/
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If there are inodes that don't have any loaded extent maps, we end up
grabbing a reference on them and later adding a delayed iput, which wakes
up the cleaner and makes it do unnecessary work. This is common when for
example the inodes were open only to run stat(2) or all their extent maps
were already released through the folio release callback
(btrfs_release_folio()) or released by a previous run of the shrinker, or
directories which never have extent maps.
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Tested-by: Ivan Shapovalov <intelfx@intelfx.name>
Link: https://lore.kernel.org/linux-btrfs/0414d690ac5680d0d77dfc930606cdc36e42e12f.camel@intelfx.name/
CC: stable@vger.kernel.org # 6.13+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_scan_root() we are accessing the inode's root (and fs_info) in a
call to btrfs_fs_closing() after we have scheduled the inode for a delayed
iput, and that can result in a use-after-free on the inode in case the
cleaner kthread does the iput before we dereference the inode in the call
to btrfs_fs_closing().
Fix this by using the fs_info stored already in a local variable instead
of doing inode->root->fs_info.
Fixes: 102044384056 ("btrfs: make the extent map shrinker run asynchronously as a work queue job")
CC: stable@vger.kernel.org # 6.13+
Tested-by: Ivan Shapovalov <intelfx@intelfx.name>
Link: https://lore.kernel.org/linux-btrfs/0414d690ac5680d0d77dfc930606cdc36e42e12f.camel@intelfx.name/
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Cross-merge bpf fixes after downstream PR (bpf-6.14-rc4).
Minor conflict:
kernel/bpf/btf.c
Adjacent changes:
kernel/bpf/arena.c
kernel/bpf/btf.c
kernel/bpf/syscall.c
kernel/bpf/verifier.c
mm/memory.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The fix alone doesn't fix [1], but should be applied before debugging
that.
[1] https://syzkaller.appspot.com/bug?extid=38a0cbd267eff2d286ff
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|