| Age | Commit message (Collapse) | Author |
|---|
|
eCryptfs uses MD5 for a couple unusual purposes: to "mix" the key into
the IVs for file contents encryption (similar to ESSIV), and to prepend
some key-dependent bytes to the plaintext when encrypting filenames
(which is useless since eCryptfs encrypts the filenames with ECB).
Currently, eCryptfs computes these MD5 hashes using the crypto_shash
API. Update it to instead use the MD5 library API. This is simpler and
faster: the library doesn't require memory allocations, can't fail, and
provides direct access to MD5 without overhead such as indirect calls.
To preserve the existing behavior of eCryptfs support being disabled
when the kernel is booted with "fips=1", make ecryptfs_get_tree() check
fips_enabled itself. Previously it relied on crypto_alloc_shash("md5")
failing. I don't know for sure that this is actually needed; e.g., it
could be argued that eCryptfs's use of MD5 isn't for a security purpose
as far as FIPS is concerned. But this preserves the existing behavior.
Tested by verifying that an existing eCryptfs can still be mounted with
a kernel that has this commit, with all the files matching. Also tested
creating a filesystem with this commit and mounting+reading it without.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20251011200010.193140-1-ebiggers@kernel.org
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
iomap_dio_zero() uses a custom allocated memory of zeroes for padding
zeroes. This was a temporary solution until there was a way to request a
zero folio that was greater than the PAGE_SIZE.
Use largest_zero_folio() function instead of using the custom allocated
memory of zeroes. There is no guarantee from largest_zero_folio()
function that it will always return a PMD sized folio. Adapt the code so
that it can also work if largest_zero_folio() returns a ZERO_PAGE.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In btrfs_fallocate(), when the allocated range overlaps with a prealloc
extent and the extent starts after i_size, the range doesn't get marked
dirty in file_extent_tree. This results in persisting an incorrect
disk_i_size for the inode when not using the no-holes feature.
This is reproducible since commit 41a2ee75aab0 ("btrfs: introduce
per-inode file extent tree"), then became hidden since commit 3d7db6e8bd22
("btrfs: don't allocate file extent tree for non regular files") and then
visible again after commit 8679d2687c35 ("btrfs: initialize
inode::file_extent_tree after i_mode has been set"), which fixes the
previous commit.
The following reproducer triggers the problem:
$ cat test.sh
MNT=/mnt/test
DEV=/dev/vdb
mkdir -p $MNT
mkfs.btrfs -f -O ^no-holes $DEV
mount $DEV $MNT
touch $MNT/file1
fallocate -n -o 1M -l 2M $MNT/file1
umount $MNT
mount $DEV $MNT
len=$((1 * 1024 * 1024))
fallocate -o 1M -l $len $MNT/file1
du --bytes $MNT/file1
umount $MNT
mount $DEV $MNT
du --bytes $MNT/file1
umount $MNT
Running the reproducer gives the following result:
$ ./test.sh
(...)
2097152 /mnt/test/file1
1048576 /mnt/test/file1
The difference is exactly 1048576 as we assigned.
Fix by adding a call to btrfs_inode_set_file_extent_range() in
btrfs_fallocate_update_isize().
Fixes: 41a2ee75aab0 ("btrfs: introduce per-inode file extent tree")
Signed-off-by: austinchang <austinchang@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we are logging a new name make sure our inode has the runtime flag
BTRFS_INODE_COPY_EVERYTHING set so that at btrfs_log_inode() we will find
new inode refs/extrefs in the subvolume tree and copy them into the log
tree.
We are currently doing it when adding a new link but we are missing it
when renaming.
An example where this makes a new name not persisted:
1) create symlink with name foo in directory A
2) fsync directory A, which persists the symlink
3) rename the symlink from foo to bar
4) fsync directory A to persist the new symlink name
Step 4 isn't working correctly as it's not logging the new name and also
leaving the old inode ref in the log tree, so after a power failure the
symlink still has the old name of "foo". This is because when we first
fsync directoy A we log the symlink's inode (as it's a new entry) and at
btrfs_log_inode() we set the log mode to LOG_INODE_ALL and then because
we are using that mode and the inode has the runtime flag
BTRFS_INODE_NEEDS_FULL_SYNC set, we clear that flag as well as the flag
BTRFS_INODE_COPY_EVERYTHING. That means the next time we log the inode,
during the rename through the call to btrfs_log_new_name() (calling
btrfs_log_inode_parent() and then btrfs_log_inode()), we will not search
the subvolume tree for new refs/extrefs and jump directory to the
'log_extents' label.
Fix this by making sure we set BTRFS_INODE_COPY_EVERYTHING on an inode
when we are about to log a new name. A test case for fstests will follow
soon.
Reported-by: Vyacheslav Kovalevsky <slava.kovalevskiy.2014@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/ac949c74-90c2-4b9a-b7fd-1ffc5c3175c7@gmail.com/
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When btrfs_add_qgroup_relation() is called with invalid qgroup levels
(src >= dst), the function returns -EINVAL directly without freeing the
preallocated qgroup_list structure passed by the caller. This causes a
memory leak because the caller unconditionally sets the pointer to NULL
after the call, preventing any cleanup.
The issue occurs because the level validation check happens before the
mutex is acquired and before any error handling path that would free
the prealloc pointer. On this early return, the cleanup code at the
'out' label (which includes kfree(prealloc)) is never reached.
In btrfs_ioctl_qgroup_assign(), the code pattern is:
prealloc = kzalloc(sizeof(*prealloc), GFP_KERNEL);
ret = btrfs_add_qgroup_relation(trans, sa->src, sa->dst, prealloc);
prealloc = NULL; // Always set to NULL regardless of return value
...
kfree(prealloc); // This becomes kfree(NULL), does nothing
When the level check fails, 'prealloc' is never freed by either the
callee or the caller, resulting in a 64-byte memory leak per failed
operation. This can be triggered repeatedly by an unprivileged user
with access to a writable btrfs mount, potentially exhausting kernel
memory.
Fix this by freeing prealloc before the early return, ensuring prealloc
is always freed on all error paths.
Fixes: 4addc1ffd67a ("btrfs: qgroup: preallocate memory before adding a relation")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Shardul Bankar <shardulsb08@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
During development of a minor feature (make sure all btrfs_bio::end_io()
is called in task context), I noticed a crash in generic/388, where
metadata writes triggered new works after btrfs_stop_all_workers().
It turns out that it can even happen without any code modification, just
using RAID5 for metadata and the same workload from generic/388 is going
to trigger the use-after-free.
[CAUSE]
If btrfs hits an error, the fs is marked as error, no new
transaction is allowed thus metadata is in a frozen state.
But there are some metadata modifications before that error, and they are
still in the btree inode page cache.
Since there will be no real transaction commit, all those dirty folios
are just kept as is in the page cache, and they can not be invalidated
by invalidate_inode_pages2() call inside close_ctree(), because they are
dirty.
And finally after btrfs_stop_all_workers(), we call iput() on btree
inode, which triggers writeback of those dirty metadata.
And if the fs is using RAID56 metadata, this will trigger RMW and queue
new works into rmw_workers, which is already stopped, causing warning
from queue_work() and use-after-free.
[FIX]
Add a special handling for write_one_eb(), that if the fs is already in
an error state, immediately mark the bbio as failure, instead of really
submitting them.
Then during close_ctree(), iput() will just discard all those dirty
tree blocks without really writing them back, thus no more new jobs for
already stopped-and-freed workqueues.
The extra discard in write_one_eb() also acts as an extra safenet.
E.g. the transaction abort is triggered by some extent/free space
tree corruptions, and since extent/free space tree is already corrupted
some tree blocks may be allocated where they shouldn't be (overwriting
existing tree blocks). In that case writing them back will further
corrupting the fs.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Userspace needs access to the signal that caused the coredump before the
coredumping process has been reaped. Expose it as part of the coredump
information in struct pidfd_info. After the process has been reaped that
info is also available as part of PIDFD_INFO_EXIT's exit_code field.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-8-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This is not needed anymore now that we have the new scheme to guarantee
all-or-nothing information exposure.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-7-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
There will likely be more info that we need to store in struct
pidfs_attr. We need to make sure that some of the information such as
exit info or coredump info that consists of multiple bits is either
available completely or not at all, but never partially. Currently we
use a pointer that we assign to. That doesn't scale. We can't waste a
pointer for each mulit-part information struct we want to expose. Use a
bitmask instead.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-6-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Some of the future fields in struct pidfd_info can be optional. If the
kernel has nothing to emit in that field, then it doesn't set the flag
in the reply. This presents a problem: There is currently no way to know
what mask flags the kernel supports since one can't always count on them
being in the reply.
Add a new PIDFD_INFO_SUPPORTED_MASK flag and field that the kernel can
set in the reply. Userspace can use this to determine if the fields it
requires from the kernel are supported. This also gives us a way to
deprecate fields in the future, if that should become necessary.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-5-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Validate that the size of struct pidfd_info is correctly updated.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-4-ca449b7b7aa0@kernel.org
Fixes: 1d8db6fd698d ("pidfs, coredump: add PIDFD_INFO_COREDUMP")
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When PIDFD_INFO_COREDUMP is requested we raise it unconditionally in the
returned mask even if no coredump actually did take place. This was
done because we assumed that the later check whether ->coredump_mask as
non-zero detects that it is zero and then retrieves the dumpability
settings from the task's mm. This has issues though becuase there are
tasks that might not have any mm. Also it's just not very cleanly
implemented. Fix this.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-2-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use a guard().
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-1-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
kernel_sock_shutdown()/sock_release()
With commit b0432201a11b ("smb: client: let destroy_mr_list() keep
smbdirect_mr_io memory if registered") the changes from commit
214bab448476 ("cifs: Call MID callback before destroying transport") and
commit 1d2a4f57cebd ("cifs:smbd When reconnecting to server, call
smbd_destroy() after all MIDs have been called") are no longer needed.
And it's better to use the same logic flow, so that
the chance of smbdirect related problems is smaller.
Fixes: 214bab448476 ("cifs: Call MID callback before destroying transport")
Fixes: 1d2a4f57cebd ("cifs:smbd When reconnecting to server, call smbd_destroy() after all MIDs have been called")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In very rare cases, DFS mounts could end up with SMB sessions without
any IPC connections. These mounts are only possible when having
unexpired cached DFS referrals, hence not requiring any IPC
connections during the mount process.
Try to establish those missing IPC connections when refreshing DFS
referrals. If the server is still rejecting it, then simply ignore
and leave expired cached DFS referral for any potential DFS failovers.
Reported-by: Jay Shin <jaeshin@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Building fs/jfs with clang and '-fms-extensions' errors with:
In file included from fs/jfs/jfs_unicode.c:8:
fs/jfs/jfs_incore.h:86:13: error: type name does not allow function specifier to be specified
86 | unchar _inline[128];
| ^
fs/jfs/jfs_incore.h:86:20: error: expected member name or ';' after declaration specifiers
86 | unchar _inline[128];
| ~~~~~~~~~~~~~~^
'-fms-extensions' in clang enables several other Microsoft specific
keywords such as _inline [1], presumably for compatibility with MSVC, as
Microsoft's documentation [2] mentions:
For compatibility with previous versions, _inline and _forceinline are
synonyms for __inline and __forceinline, respectively
Rename the _inline array in 'struct jfs_inode_info' to _inline_sym to
avoid this conflict, which is not a large workaround as this member is
only ever referred to via the i_inline macro.
Link: https://github.com/llvm/llvm-project/blob/249883d0c5883996bed038cd82a8999f342994c9/clang/include/clang/Basic/TokenKinds.def#L744-L79 [1]
Link: https://learn.microsoft.com/en-us/cpp/c-language/inline-functions [2]
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Link: https://patch.msgid.link/20251023-jfs-fix-conflict-with-clang-ms-ext-v1-1-e219d59a1e68@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
The logic in wbc_to_tag() is widely used in file systems, so modify this
function to be inline and use it in file systems.
This patch has only passed compilation tests, but it should be fine.
Signed-off-by: Julian Sun <sunjunchao@bytedance.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Clang, in particular, is not happy about dead code:
fs/namespace.c:135:37: error: unused function 'node_to_mnt_ns' [-Werror,-Wunused-function]
135 | static inline struct mnt_namespace *node_to_mnt_ns(const struct rb_node *node)
| ^~~~~~~~~~~~~~
1 error generated.
Remove a leftover from the previous cleanup.
Fixes: 7d7d16498958 ("mnt: support ns lookup")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251024132336.1666382-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Set s_min_writeback_pages to the zone size, so that writeback always
writes up to a full zone. This ensures that writeback does not add
spurious file fragmentation when writing back a large number of
files that are larger than the zone size.
Fixes: 4e4d52075577 ("xfs: add the zoned space allocator")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251017034611.651385-4-hch@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The relatively low minimal writeback size of 4MiB means that written back
inodes on rotational media are switched a lot. Besides introducing
additional seeks, this also can lead to extreme file fragmentation on
zoned devices when a lot of files are cached relative to the available
writeback bandwidth.
Add a superblock field that allows the file system to override the
default size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251017034611.651385-3-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Return the pages directly when calculated instead of first assigning
them back to a variable, and directly return for the data integrity /
tagged case instead of going through an else clause.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251017034611.651385-2-hch@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Rename filemap_fdatawrite_range_kick to filemap_flush_range because it
is the ranged version of filemap_flush.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251024080431.324236-11-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use filemap_fdatawrite_range and filemap_fdatawrite_range_kick instead
of the low-level __filemap_fdatawrite_range that requires the caller
to know the internals of the writeback_control structure and remove
__filemap_fdatawrite_range now that it is trivial and only two callers
would be left.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251024080431.324236-10-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Replace filemap_fdatawrite_wbc, which exposes a writeback_control to the
callers with a filemap_writeback helper that takes all the possible
arguments and declares the writeback_control itself.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251024080431.324236-9-hch@lst.de
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Abstract out the btrfs-specific behavior of kicking off I/O on a number
of pages on an address_space into a well-defined helper.
Note: there is no kerneldoc comment for the new function because it is
not part of the public API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251024080431.324236-7-hch@lst.de
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In preparation for changing the filemap_fdatawrite_wbc API to not expose
the writeback_control to the callers, push the wbc declaration next to
the filemap_fdatawrite_wbc call and just pass the nr_to_write value to
start_delalloc_inodes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251024080431.324236-6-hch@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
start_delalloc_inodes has a struct inode * pointer available in the
main loop, use it instead of re-calculating it from the btrfs inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251024080431.324236-5-hch@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
ocfs2_journal_submit_inode_data_buffers
Use filemap_fdatawrite_range instead of opencoding the logic using
filemap_fdatawrite_wbc. There is a slight change in the conversion
as nr_to_write is now set to LONG_MAX instead of double the number
of the pages in the range. LONG_MAX is the usual nr_to_write for
WB_SYNC_ALL writeback, and the value expected by lower layers here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251024080431.324236-4-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use filemap_fdatawrite_range instead of opencoding the logic using
filemap_fdatawrite_wbc.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251024080431.324236-3-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
syzbot is reporting that S_IFMT bits of inode->i_mode can become bogus when
the S_IFMT bits of the 32bits "mode" field loaded from disk are corrupted
or when the 32bits "attributes" field loaded from disk are corrupted.
A documentation says that BFS uses only lower 9 bits of the "mode" field.
But I can't find an explicit explanation that the unused upper 23 bits
(especially, the S_IFMT bits) are initialized with 0.
Therefore, ignore the S_IFMT bits of the "mode" field loaded from disk.
Also, verify that the value of the "attributes" field loaded from disk is
either BFS_VREG or BFS_VDIR (because BFS supports only regular files and
the root directory).
Reported-by: syzbot+895c23f6917da440ed0d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=895c23f6917da440ed0d
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://patch.msgid.link/fabce673-d5b9-4038-8287-0fd65d80203b@I-love.SAKURA.ne.jp
Reviewed-by: Tigran Aivazian <aivazian.tigran@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When a process tries to access an entry in /afs, normally what happens is
that an automount dentry is created by ->lookup() and then triggered, which
jumps through the ->d_automount() op. Currently, afs_dynroot_lookup() does
not do cell DNS lookup, leaving that to afs_d_automount() to perform -
however, it is possible to use access() or stat() on the automount point,
which will always return successfully, have briefly created an afs_cell
record if one did not already exist.
This means that something like:
test -d "/afs/.west" && echo Directory exists
will print "Directory exists" even though no such cell is configured. This
breaks the "west" python module available on PIP as it expects this access
to fail.
Now, it could be possible to make afs_dynroot_lookup() perform the DNS[*]
lookup, but that would make "ls --color /afs" do this for each cell in /afs
that is listed but not yet probed. kafs-client, probably wrongly, preloads
the entire cell database and all the known cells are then listed in /afs -
and doing ls /afs would be very, very slow, especially if any cell supplied
addresses but was wholly inaccessible.
[*] When I say "DNS", actually read getaddrinfo(), which could use any one
of a host of mechanisms. Could also use static configuration.
To fix this, make the following changes:
(1) Create an enum to specify the origination point of a call to
afs_lookup_cell() and pass this value into that function in place of
the "excl" parameter (which can be derived from it). There are six
points of origination:
- Cell preload through /proc/net/afs/cells
- Root cell config through /proc/net/afs/rootcell
- Lookup in dynamic root
- Automount trigger
- Direct mount with mount() syscall
- Alias check where YFS tells us the cell name is different
(2) Add an extra state into the afs_cell state machine to indicate a cell
that's been initialised, but not yet looked up. This is separate from
one that can be considered active and has been looked up at least
once.
(3) Make afs_lookup_cell() vary its behaviour more, depending on where it
was called from:
If called from preload or root cell config, DNS lookup will not happen
until we definitely want to use the cell (dynroot mount, automount,
direct mount or alias check). The cell will appear in /afs but stat()
won't trigger DNS lookup.
If the cell already exists, dynroot will not wait for the DNS lookup
to complete. If the cell did not already exist, dynroot will wait.
If called from automount, direct mount or alias check, it will wait
for the DNS lookup to complete.
(4) Make afs_lookup_cell() return an error if lookup failed in one way or
another. We try to return -ENOENT if the DNS says the cell does not
exist and -EDESTADDRREQ if we couldn't access the DNS.
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220685
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/1784747.1761158912@warthog.procyon.org.uk
Fixes: 1d0b929fc070 ("afs: Change dynroot to create contents on demand")
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pull smb server fixes from Steve French:
- Improve check for malformed payload
- Fix free transport smbdirect potential race
- Fix potential race in credit allocation during smbdirect negotiation
* tag 'v6.18-rc3-smb-server-fixes' of git://git.samba.org/ksmbd:
smb: server: let smb_direct_cm_handler() call ib_drain_qp() after smb_direct_disconnect_rdma_work()
smb: server: call smb_direct_post_recv_credits() when the negotiation is done
ksmbd: transport_ipc: validate payload size before reading handle
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Regression fixes:
- Revert the patch that removed the cap on MAX_OPS_PER_COMPOUND
- Address a kernel build issue
Stable fixes:
- Fix crash when a client queries new attributes on forechannel
- Fix rare NFSD crash when tracing is enabled"
* tag 'nfsd-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "NFSD: Remove the cap on number of operations per NFSv4 COMPOUND"
nfsd: Avoid strlen conflict in nfsd4_encode_components_esc()
NFSD: Fix crash in nfsd4_read_release()
NFSD: Define actions for the new time_deleg FATTR4 attributes
|
|
When smb2_query_info_compound() retries, a previously allocated cfid may
have been freed in the first attempt.
Because cfid wasn't reset on replay, later cleanup could act on a stale
pointer, leading to a potential use-after-free.
Reinitialize cfid to NULL under the replay label.
Example trace (trimmed):
refcount_t: underflow; use-after-free.
WARNING: CPU: 1 PID: 11224 at ../lib/refcount.c:28 refcount_warn_saturate+0x9c/0x110
[...]
RIP: 0010:refcount_warn_saturate+0x9c/0x110
[...]
Call Trace:
<TASK>
smb2_query_info_compound+0x29c/0x5c0 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
? step_into+0x10d/0x690
? __legitimize_path+0x28/0x60
smb2_queryfs+0x6a/0xf0 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
smb311_queryfs+0x12d/0x140 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
? kmem_cache_alloc+0x18a/0x340
? getname_flags+0x46/0x1e0
cifs_statfs+0x9f/0x2b0 [cifs f90b72658819bd21c94769b6a652029a07a7172f]
statfs_by_dentry+0x67/0x90
vfs_statfs+0x16/0xd0
user_statfs+0x54/0xa0
__do_sys_statfs+0x20/0x50
do_syscall_64+0x58/0x80
Cc: stable@kernel.org
Fixes: 4f1fffa237692 ("cifs: commands that are retried should have replay flag set")
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Acked-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The HOSTFS_ATTR_* values were meant to be standalone for
communication between hostfs's kernel and user code parts.
However, it's easy to forget that HOSTFS_ATTR_* should be
used even on the kernel side, and that wasn't consistently
done. As a result, the values need to match ATTR_* values,
which is not useful to maintain by hand. Instead, generate
them via asm-offsets like other constants that UML needs
in user-side code that aren't otherwise available in any
header files that can be included there.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20251007071452.367989-3-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
smb_direct_disconnect_rdma_work()
All handlers triggered by ib_drain_qp() should already see the
broken connection.
smb_direct_cm_handler() is called under a mutex of the rdma_cm,
we should make sure ib_drain_qp() and all rdma layer logic completes
and unlocks the mutex.
It means free_transport() will also already see the connection
as SMBDIRECT_SOCKET_DISCONNECTED, so we need to call
crdma_[un]lock_handler(sc->rdma.cm_id) around
ib_drain_qp(), rdma_destroy_qp(), ib_free_cq() and ib_dealloc_pd().
Otherwise we free resources while the ib_drain_qp() within
smb_direct_cm_handler() is still running.
We have to unlock before rdma_destroy_id() as it locks again.
Fixes: 141fa9824c0f ("ksmbd: call ib_drain_qp when disconnected")
Fixes: 4c564f03e23b ("smb: server: make use of common smbdirect_socket")
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We now activate sc->recv_io.posted.refill_work and sc->idle.immediate_work
only after a successful negotiation, before sending the negotiation
response.
It means the queue_work(sc->workqueue, &sc->recv_io.posted.refill_work)
in put_recvmsg() of the negotiate request, is a no-op now.
It also means our explicit smb_direct_post_recv_credits() will
have queue_work(sc->workqueue, &sc->idle.immediate_work) as no-op.
This should make sure we don't have races and post any immediate
data_transfer message that tries to grant credits to the peer,
before we send the negotiation response, as that will grant
the initial credits to the peer.
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Fixes: 1cde0a74a7a8 ("smb: server: don't use delayed_work for post_recv_credits_work")
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
handle_response() dereferences the payload as a 4-byte handle without
verifying that the declared payload size is at least 4 bytes. A malformed
or truncated message from ksmbd.mountd can lead to a 4-byte read past the
declared payload size. Validate the size before dereferencing.
This is a minimal fix to guard the initial handle read.
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Reported-by: Qianchang Zhao <pioooooooooip@gmail.com>
Signed-off-by: Qianchang Zhao <pioooooooooip@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix typo in description of enable_gcm_256 module parameter
Suggested-by: Thomas Spear <speeddymon@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Remove dead code leftovers after a recent mitigations cleanup which
fail a Clang build
- Make sure a Retbleed mitigation message is printed only when
necessary
- Correct the last Zen1 microcode revision for which Entrysign sha256
check is needed
- Fix a NULL ptr deref when mounting the resctrl fs on a system which
supports assignable counters but where L3 total and local bandwidth
monitoring has been disabled at boot
* tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Remove dead code which might prevent from building
x86/bugs: Qualify RETBLEED_INTEL_MSG
x86/microcode: Fix Entrysign revision check for Zen1/Naples
x86,fs/resctrl: Fix NULL pointer dereference with events force-disabled in mbm_event mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- In Device::parent(), do not make any assumptions on the device
context of the parent device
- Check visibility before changing ownership of a sysfs attribute
group
- In topology_parse_cpu_capacity(), replace an incorrect usage of
PTR_ERR_OR_ZERO() with IS_ERR_OR_NULL()
- In devcoredump, fix a circular locking dependency between
struct devcd_entry::mutex and kernfs
- Do not warn about a pending fw_devlink sync state
* tag 'driver-core-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()
rust: device: fix device context of Device::parent()
sysfs: check visibility before changing group attribute ownership
devcoredump: Fix circular locking dependency with devcd->mutex.
driver core: fw_devlink: Don't warn about sync_state() pending
|
|
Pull xfs fixes from Carlos Maiolino:
"The main highlight here is a fix for a bug brought in by the removal
of attr2 mount option, where some installations might actually have
'attr2' explicitly configured in fstab preventing system to boot by
not being able to remount the rootfs as RW.
Besides that there are a couple fix to the zonefs implementation,
changing XFS_ONLINE_SCRUB_STATS to depend on DEBUG_FS (was select
before), and some other minor changes"
* tag 'xfs-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix locking in xchk_nlinks_collect_dir
xfs: loudly complain about defunct mount options
xfs: always warn about deprecated mount options
xfs: don't set bt_nr_sectors to a negative number
xfs: don't use __GFP_NOFAIL in xfs_init_fs_context
xfs: cache open zone in inode->i_private
xfs: avoid busy loops in GCD
xfs: XFS_ONLINE_SCRUB_STATS should depend on DEBUG_FS
xfs: do not tightly pack-write large files
xfs: Improve CONFIG_XFS_RT Kconfig help
|
|
Pull smb server fixes from Steve French:
"smbdirect (RDMA) fixes in order avoid potential submission queue
overflows:
- free transport teardown fix
- credit related fixes (five server related, one client related)"
* tag 'v6.18-rc2-smb-server-fixes' of git://git.samba.org/ksmbd:
smb: server: let free_transport() wait for SMBDIRECT_SOCKET_DISCONNECTED
smb: client: make use of smbdirect_socket.send_io.lcredits.*
smb: server: make use of smbdirect_socket.send_io.lcredits.*
smb: server: simplify sibling_list handling in smb_direct_flush_send_list/send_done
smb: server: smb_direct_disconnect_rdma_connection() already wakes all waiters on error
smb: smbdirect: introduce smbdirect_socket.send_io.lcredits.*
smb: server: allocate enough space for RW WRs and ib_drain_qp()
|
|
Pull smb client fixes from Steve French:
- add missing tracepoints
- smbdirect (RDMA) fix
- fix potential issue with credits underflow
- rename fix
- improvement to calc_signature and additional cleanup patch
* tag '6.18-rc2-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: #include cifsglob.h before trace.h to allow structs in tracepoints
cifs: Call the calc_signature functions directly
smb: client: get rid of d_drop() in cifs_do_rename()
cifs: Fix TCP_Server_Info::credits to be signed
cifs: Add a couple of missing smb3_rw_credits tracepoints
smb: client: allocate enough space for MR WRs and ib_drain_qp()
|
|
folio_nr_pages() is a faster helper function to get the number of pages when
NR_PAGES_IN_LARGE_FOLIO is enabled.
Signed-off-by: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Zoned storage devices provide marginal over-capacity space, typically
around 10%, for filesystem level storage control.
By utilizing this extra capacity, we can safely reduce the default
'valid_thresh_ratio' to 80. This action helps to significantly prevent
excessive garbage collection (GC) and the resulting power consumption,
as the filesystem becomes less aggressive about cleaning segments
that still hold a high percentage of valid data.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The current version missed setting one time GC for normal zoned GC
cycle. So, valid threshold control is not working. Need to fix it to
prevent excessive GC for zoned devices.
Fixes: e791d00bd06c ("f2fs: add valid block ratio not to do excessive GC for one time GC")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
We should wait for the rdma_cm to become SMBDIRECT_SOCKET_DISCONNECTED!
At least on the client side (with similar code)
wait_event_interruptible() often returns with -ERESTARTSYS instead of
waiting for SMBDIRECT_SOCKET_DISCONNECTED.
We should use wait_event() here too, which makes the code be identical
in client and server, which will help when moving to common functions.
Fixes: b31606097de8 ("smb: server: move smb_direct_disconnect_rdma_work() into free_transport()")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- in send, fix duplicated rmdir operations when using extrefs
(hardlinks), receive can fail with ENOENT
- fixup of error check when reading extent root in ref-verify and
damaged roots are allowed by mount option (found by smatch)
- fix freeing partially initialized fs info (found by syzkaller)
- fix use-after-free when printing ref_tracking status of delayed
inodes
* tag 'for-6.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: ref-verify: fix IS_ERR() vs NULL check in btrfs_build_ref_tree()
btrfs: fix delayed_node ref_tracker use after free
btrfs: send: fix duplicated rmdir operations when using extrefs
btrfs: directly free partially initialized fs_info in btrfs_check_leaked_roots()
|
|
Update module parameters `mem_type` and `ramoops_ecc` from platform data
so that they are available through /sys/module/ramoops/parameters/.
`ramoops_dump_oops` isn't included as it has been deprecated.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20251023143755.26204-1-tzungbi@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
