| Age | Commit message (Collapse) | Author |
|---|
|
commit 2ae826799932ff89409f56636ad3c25578fe7cf5 upstream.
The reproducer uses FAULT_INJECTION to make memory allocation fail, which
causes __filemap_get_folio() to fail, when initializing w_folios[i] in
ocfs2_grab_folios_for_write(), it only returns an error code and the value
of w_folios[i] is the error code, which causes
ocfs2_unlock_and_free_folios() to recycle the invalid w_folios[i] when
releasing folios.
Link: https://lkml.kernel.org/r/20250616013140.3602219-1-lizhi.xu@windriver.com
Reported-by: syzbot+c2ea94ae47cd7e3881ec@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c2ea94ae47cd7e3881ec
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5d94b19f066480addfcdcb5efde66152ad5a7c0e upstream.
The quotacheck doesn't initialize sc->ip.
Cc: stable@vger.kernel.org # v6.8
Fixes: 21d7500929c8a0 ("xfs: improve dquot iteration for scrub")
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4289b494ac553e74e86fed1c66b2bf9530bc1082 upstream.
[BUG]
There is an internal report that balance triggered transaction abort,
with the following call trace:
item 85 key (594509824 169 0) itemoff 12599 itemsize 33
extent refs 1 gen 197740 flags 2
ref#0: tree block backref root 7
item 86 key (594558976 169 0) itemoff 12566 itemsize 33
extent refs 1 gen 197522 flags 2
ref#0: tree block backref root 7
...
BTRFS error (device loop0): extent item not found for insert, bytenr 594526208 num_bytes 16384 parent 449921024 root_objectid 934 owner 1 offset 0
BTRFS error (device loop0): failed to run delayed ref for logical 594526208 num_bytes 16384 type 182 action 1 ref_mod 1: -117
------------[ cut here ]------------
BTRFS: Transaction aborted (error -117)
WARNING: CPU: 1 PID: 6963 at ../fs/btrfs/extent-tree.c:2168 btrfs_run_delayed_refs+0xfa/0x110 [btrfs]
And btrfs check doesn't report anything wrong related to the extent
tree.
[CAUSE]
The cause is a little complex, firstly the extent tree indeed doesn't
have the backref for 594526208.
The extent tree only have the following two backrefs around that bytenr
on-disk:
item 65 key (594509824 METADATA_ITEM 0) itemoff 13880 itemsize 33
refs 1 gen 197740 flags TREE_BLOCK
tree block skinny level 0
(176 0x7) tree block backref root CSUM_TREE
item 66 key (594558976 METADATA_ITEM 0) itemoff 13847 itemsize 33
refs 1 gen 197522 flags TREE_BLOCK
tree block skinny level 0
(176 0x7) tree block backref root CSUM_TREE
But the such missing backref item is not an corruption on disk, as the
offending delayed ref belongs to subvolume 934, and that subvolume is
being dropped:
item 0 key (934 ROOT_ITEM 198229) itemoff 15844 itemsize 439
generation 198229 root_dirid 256 bytenr 10741039104 byte_limit 0 bytes_used 345571328
last_snapshot 198229 flags 0x1000000000001(RDONLY) refs 0
drop_progress key (206324 EXTENT_DATA 2711650304) drop_level 2
level 2 generation_v2 198229
And that offending tree block 594526208 is inside the dropped range of
that subvolume. That explains why there is no backref item for that
bytenr and why btrfs check is not reporting anything wrong.
But this also shows another problem, as btrfs will do all the orphan
subvolume cleanup at a read-write mount.
So half-dropped subvolume should not exist after an RW mount, and
balance itself is also exclusive to subvolume cleanup, meaning we
shouldn't hit a subvolume half-dropped during relocation.
The root cause is, there is no orphan item for this subvolume.
In fact there are 5 subvolumes from around 2021 that have the same
problem.
It looks like the original report has some older kernels running, and
caused those zombie subvolumes.
Thankfully upstream commit 8d488a8c7ba2 ("btrfs: fix subvolume/snapshot
deletion not triggered on mount") has long fixed the bug.
[ENHANCEMENT]
For repairing such old fs, btrfs-progs will be enhanced.
Considering how delayed the problem will show up (at run delayed ref
time) and at that time we have to abort transaction already, it is too
late.
Instead here we reject any half-dropped subvolume for reloc tree at the
earliest time, preventing confusion and extra time wasted on debugging
similar bugs.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7b632596188e1973c6b3ac1c9f8252f735e1039f upstream.
__qgroup_excl_accounting() uses the qgroup iterator machinery to
update the account of one qgroups usage for all its parent hierarchy,
when we either add or remove a relation and have only exclusive usage.
However, there is a small bug there: we loop with an extra iteration
temporary qgroup called `cur` but never actually refer to that in the
body of the loop. As a result, we redundantly account the same usage to
the first qgroup in the list.
This can be reproduced in the following way:
mkfs.btrfs -f -O squota <dev>
mount <dev> <mnt>
btrfs subvol create <mnt>/sv
dd if=/dev/zero of=<mnt>/sv/f bs=1M count=1
sync
btrfs qgroup create 1/100 <mnt>
btrfs qgroup create 2/200 <mnt>
btrfs qgroup assign 1/100 2/200 <mnt>
btrfs qgroup assign 0/256 1/100 <mnt>
btrfs qgroup show <mnt>
and the broken result is (note the 2MiB on 1/100 and 0Mib on 2/100):
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
1/100 2.03MiB 2.03MiB 2/100<1 member qgroup>
2/100 0.00B 0.00B <0 member qgroups>
With this fix, which simply re-uses `qgroup` as the iteration variable,
we see the expected result:
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
0/256 1.02MiB 1.02MiB sv
1/100 1.02MiB 1.02MiB 2/100<1 member qgroup>
2/100 1.02MiB 1.02MiB <0 member qgroups>
The existing fstests did not exercise two layer inheritance so this bug
was missed. I intend to add that testing there, as well.
Fixes: a0bdc04b0732 ("btrfs: qgroup: use qgroup_iterator in __qgroup_excl_accounting()")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit deaf895212da74635a7f0a420e1ecf8f5eca1fe5 upstream.
Inside nocow_one_range(), if the checksum cloning for data reloc inode
failed, we call btrfs_cleanup_ordered_extents() to cleanup the just
allocated ordered extents.
But unlike extent_clear_unlock_delalloc(),
btrfs_cleanup_ordered_extents() requires a length, not an inclusive end
bytenr.
This can be problematic, as the @end is normally way larger than @len.
This means btrfs_cleanup_ordered_extents() can be called on folios
out of the correct range, and if the out-of-range folio is under
writeback, we can incorrectly clear the ordered flag of the folio, and
trigger the DEBUG_WARN() inside btrfs_writepage_cow_fixup().
Fix the wrong parameter with correct length instead.
Fixes: 94f6c5c17e52 ("btrfs: move ordered extent cleanup to where they are allocated")
CC: stable@vger.kernel.org # 6.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3a931e9b39c7ff8066657042f5f00d3b7e6ad315 upstream.
We call btrfs_zone_finish_one_bg() to zone finish one block group and make
room to activate another block group. Currently, we can choose a metadata
block group as a target. But, as we reserve an active metadata block group,
we no longer want to select a metadata block group. So, skip it in the
loop.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fc5799986fbca957e2e3c0480027f249951b7bcf upstream.
Currently we only log an error message if we can't find the block group
for a log tree extent buffer when unaccounting it (while freeing a log
tree). A missing block group means something is seriously wrong and we
end up leaking space from the metadata space info. So return -ENOENT in
case we don't find the block group.
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a32e4f0025a74c70dcab4478e9b29c22f5ecf2f upstream.
If we log a new inode (not persisted in a past transaction) that has 0
links and extents, then log another inode with an higher inode number, we
end up with failing to replay the log tree with -EINVAL. The steps for
this are:
1) create new file A
2) write some data to file A
3) open an fd on file A
4) unlink file A
5) fsync file A using the previously open fd
6) create file B (has higher inode number than file A)
7) fsync file B
8) power fail before current transaction commits
Now when attempting to mount the fs, the log replay will fail with
-ENOENT at replay_one_extent() when attempting to replay the first
extent of file A. The failure comes when trying to open the inode for
file A in the subvolume tree, since it doesn't exist.
Before commit 5f61b961599a ("btrfs: fix inode lookup error handling
during log replay"), the returned error was -EIO instead of -ENOENT,
since we converted any errors when attempting to read an inode during
log replay to -EIO.
The reason for this is that the log replay procedure fails to ignore
the current inode when we are at the stage LOG_WALK_REPLAY_ALL, our
current inode has 0 links and last inode we processed in the previous
stage has a non 0 link count. In other words, the issue is that at
replay_one_extent() we only update wc->ignore_cur_inode if the current
replay stage is LOG_WALK_REPLAY_INODES.
Fix this by updating wc->ignore_cur_inode whenever we find an inode item
regardless of the current replay stage. This is a simple solution and easy
to backport, but later we can do other alternatives like avoid logging
extents or inode items other than the inode item for inodes with a link
count of 0.
The problem with the wc->ignore_cur_inode logic has been around since
commit f2d72f42d5fa ("Btrfs: fix warning when replaying log after fsync
of a tmpfile") but it only became frequent to hit since the more recent
commit 5e85262e542d ("btrfs: fix fsync of files with no hard links not
persisting deletion"), because we stopped skipping inodes with a link
count of 0 when logging, while before the problem would only be triggered
if trying to replay a log tree created with an older kernel which has a
logged inode with 0 links.
A test case for fstests will be submitted soon.
Reported-by: Peter Jung <ptr1337@cachyos.org>
Link: https://lore.kernel.org/linux-btrfs/fce139db-4458-4788-bb97-c29acf6cb1df@cachyos.org/
Reported-by: burneddi <burneddi@protonmail.com>
Link: https://lore.kernel.org/linux-btrfs/lh4W-Lwc0Mbk-QvBhhQyZxf6VbM3E8VtIvU3fPIQgweP_Q1n7wtlUZQc33sYlCKYd-o6rryJQfhHaNAOWWRKxpAXhM8NZPojzsJPyHMf2qY=@protonmail.com/#t
Reported-by: Russell Haley <yumpusamongus@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/598ecc75-eb80-41b3-83c2-f2317fbb9864@gmail.com/
Fixes: f2d72f42d5fa ("Btrfs: fix warning when replaying log after fsync of a tmpfile")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 005b0a0c24e1628313e951516b675109a92cacfe upstream.
Currently holes are sent as writes full of zeroes, which results in
unnecessarily using disk space at the receiving end and increasing the
stream size.
In some cases we avoid sending writes of zeroes, like during a full
send operation where we just skip writes for holes.
But for some cases we fill previous holes with writes of zeroes too, like
in this scenario:
1) We have a file with a hole in the range [2M, 3M), we snapshot the
subvolume and do a full send. The range [2M, 3M) stays as a hole at
the receiver since we skip sending write commands full of zeroes;
2) We punch a hole for the range [3M, 4M) in our file, so that now it
has a 2M hole in the range [2M, 4M), and snapshot the subvolume.
Now if we do an incremental send, we will send write commands full
of zeroes for the range [2M, 4M), removing the hole for [2M, 3M) at
the receiver.
We could improve cases such as this last one by doing additional
comparisons of file extent items (or their absence) between the parent
and send snapshots, but that's a lot of code to add plus additional CPU
and IO costs.
Since the send stream v2 already has a fallocate command and btrfs-progs
implements a callback to execute fallocate since the send stream v2
support was added to it, update the kernel to use fallocate for punching
holes for V2+ streams.
Test coverage is provided by btrfs/284 which is a version of btrfs/007
that exercises send stream v2 instead of v1, using fsstress with random
operations and fssum to verify file contents.
Link: https://github.com/kdave/btrfs-progs/issues/1001
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c0d013495a80cbb53e2288af7ae0ec4170aafd7c upstream.
If we failed to insert the tree mod log operation, we are not removing the
dirty status from the allocated and dirtied extent buffer before we free
it. Removing the dirty status is needed for several reasons such as to
adjust the fs_info->dirty_metadata_bytes counter and remove the dirty
status from the respective folios. So add the missing call to
btrfs_clear_buffer_dirty().
Fixes: f61aa7ba08ab ("btrfs: do not BUG_ON() on tree mod log failure at insert_new_root()")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 24e066ded45b8147b79c7455ac43a5bff7b5f378 upstream.
During log replay, at add_inode_ref(), if we have an extref item that
contains multiple extrefs and one of them points to a directory that does
not exist in the subvolume tree, we are supposed to ignore it and process
the remaining extrefs encoded in the extref item, since each extref can
point to a different parent inode. However when that happens we just
return from the function and ignore the remaining extrefs.
The problem has been around since extrefs were introduced, in commit
f186373fef00 ("btrfs: extended inode refs"), but it's hard to hit in
practice because getting extref items encoding multiple extref requires
getting a hash collision when computing the offset of the extref's
key. The offset if computed like this:
key.offset = btrfs_extref_hash(dir_ino, name->name, name->len);
and btrfs_extref_hash() is just a wrapper around crc32c().
Fix this by moving to next iteration of the loop when we don't find
the parent directory that an extref points to.
Fixes: f186373fef00 ("btrfs: extended inode refs")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 08530d6e638427e7e1344bd67bacc03882ba95b9 upstream.
When quotas are disabled qgroup ioctls are supposed to return -ENOTCONN,
but the qgroup create ioctl stopped doing that when it races with a quota
disable operation, returning 0 instead. This change of behaviour happened
in commit 6ed05643ddb1 ("btrfs: create qgroup earlier in snapshot
creation").
The issue happens as follows:
1) Task A enters btrfs_ioctl_qgroup_create(), qgroups are enabled and so
qgroup_enabled() returns true since fs_info->quota_root is not NULL;
2) Task B enters btrfs_ioctl_quota_ctl() -> btrfs_quota_disable() and
disables qgroups, so now fs_info->quota_root is NULL;
3) Task A enters btrfs_create_qgroup() and calls btrfs_qgroup_mode(),
which returns BTRFS_QGROUP_MODE_DISABLED since quotas are disabled,
and then btrfs_create_qgroup() returns 0 to the caller, which makes
the ioctl return 0 instead of -ENOTCONN.
The check for fs_info->quota_root and returning -ENOTCONN if it's NULL
is made only after the call btrfs_qgroup_mode().
Fix this by moving the check for disabled quotas with btrfs_qgroup_mode()
into transaction.c:create_pending_snapshot(), so that we don't abort the
transaction if btrfs_create_qgroup() returns -ENOTCONN and quotas are
disabled.
Fixes: 6ed05643ddb1 ("btrfs: create qgroup earlier in snapshot creation")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
btrfs_uring_encoded_read()
commit ea124ec327086325fc096abf42837dac471ac7ae upstream.
btrfs_uring_encoded_read() returns early with -ENOTTY if the uring_cmd
is issued with IO_URING_F_COMPAT but the kernel doesn't support compat
syscalls. However, this early return bypasses the syscall accounting.
Go to out_acct instead to ensure the syscall is counted.
Fixes: 34310c442e17 ("btrfs: add io_uring command for encoded reads (ENCODED_READ ioctl)")
CC: stable@vger.kernel.org # 6.15+
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1ef94169db0958d6de39f9ea6e063ce887342e2d upstream.
[TEST FAILURE WITH EXPERIMENTAL FEATURES]
When running test case generic/508, the test case will fail with the new
btrfs shutdown support:
generic/508 - output mismatch (see /home/adam/xfstests/results//generic/508.out.bad)
# --- tests/generic/508.out 2022-05-11 11:25:30.806666664 +0930
# +++ /home/adam/xfstests/results//generic/508.out.bad 2025-07-02 14:53:22.401824212 +0930
# @@ -1,2 +1,6 @@
# QA output created by 508
# Silence is golden
# +Before:
# +After : stat.btime = Thu Jan 1 09:30:00 1970
# +Before:
# +After : stat.btime = Wed Jul 2 14:53:22 2025
# ...
# (Run 'diff -u /home/adam/xfstests/tests/generic/508.out /home/adam/xfstests/results//generic/508.out.bad' to see the entire diff)
Ran: generic/508
Failures: generic/508
Failed 1 of 1 tests
Please note that the test case requires shutdown support, thus the test
case will be skipped using the current upstream kernel, as it doesn't
have shutdown ioctl support.
[CAUSE]
The direct cause the 0 time stamp in the log tree:
leaf 30507008 items 2 free space 16057 generation 9 owner TREE_LOG
leaf 30507008 flags 0x1(WRITTEN) backref revision 1
checksum stored e522548d
checksum calced e522548d
fs uuid 57d45451-481e-43e4-aa93-289ad707a3a0
chunk uuid d52bd3fd-5163-4337-98a7-7986993ad398
item 0 key (257 INODE_ITEM 0) itemoff 16123 itemsize 160
generation 9 transid 9 size 0 nbytes 0
block group 0 mode 100644 links 1 uid 0 gid 0 rdev 0
sequence 1 flags 0x0(none)
atime 1751432947.492000000 (2025-07-02 14:39:07)
ctime 1751432947.492000000 (2025-07-02 14:39:07)
mtime 1751432947.492000000 (2025-07-02 14:39:07)
otime 0.0 (1970-01-01 09:30:00) <<<
But the old fs tree has all the correct time stamp:
btrfs-progs v6.12
fs tree key (FS_TREE ROOT_ITEM 0)
leaf 30425088 items 2 free space 16061 generation 5 owner FS_TREE
leaf 30425088 flags 0x1(WRITTEN) backref revision 1
checksum stored 48f6c57e
checksum calced 48f6c57e
fs uuid 57d45451-481e-43e4-aa93-289ad707a3a0
chunk uuid d52bd3fd-5163-4337-98a7-7986993ad398
item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160
generation 3 transid 0 size 0 nbytes 16384
block group 0 mode 40755 links 1 uid 0 gid 0 rdev 0
sequence 0 flags 0x0(none)
atime 1751432947.0 (2025-07-02 14:39:07)
ctime 1751432947.0 (2025-07-02 14:39:07)
mtime 1751432947.0 (2025-07-02 14:39:07)
otime 1751432947.0 (2025-07-02 14:39:07) <<<
The root cause is that fill_inode_item() in tree-log.c is only
populating a/c/m time, not the otime (or btime in statx output).
Part of the reason is that, the vfs inode only has a/c/m time, no native
btime support yet.
[FIX]
Thankfully btrfs has its otime stored in btrfs_inode::i_otime_sec and
btrfs_inode::i_otime_nsec.
So what we really need is just fill the otime time stamp in
fill_inode_item() of tree-log.c
There is another fill_inode_item() in inode.c, which is doing the proper
otime population.
Fixes: 94edf4ae43a5 ("Btrfs: don't bother committing delayed inode updates when fsyncing")
CC: stable@vger.kernel.org
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e1249667750399a48cafcf5945761d39fa584edf upstream.
There's a race between a task disabling quotas and another running the
rescan ioctl that can result in a use-after-free of qgroup records from
the fs_info->qgroup_tree rbtree.
This happens as follows:
1) Task A enters btrfs_ioctl_quota_rescan() -> btrfs_qgroup_rescan();
2) Task B enters btrfs_quota_disable() and calls
btrfs_qgroup_wait_for_completion(), which does nothing because at that
point fs_info->qgroup_rescan_running is false (it wasn't set yet by
task A);
3) Task B calls btrfs_free_qgroup_config() which starts freeing qgroups
from fs_info->qgroup_tree without taking the lock fs_info->qgroup_lock;
4) Task A enters qgroup_rescan_zero_tracking() which starts iterating
the fs_info->qgroup_tree tree while holding fs_info->qgroup_lock,
but task B is freeing qgroup records from that tree without holding
the lock, resulting in a use-after-free.
Fix this by taking fs_info->qgroup_lock at btrfs_free_qgroup_config().
Also at btrfs_qgroup_rescan() don't start the rescan worker if quotas
were already disabled.
Reported-by: cen zhang <zzzccc427@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAFRLqsV+cMDETFuzqdKSHk_FDm6tneea45krsHqPD6B3FetLpQ@mail.gmail.com/
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 807d9023e75fc20bfd6dd2ac0408ce4af53f1648 upstream.
If the ssd_spread mount option is enabled, then we run the so called
clustered allocator for data block groups. In practice, this results in
creating a btrfs_free_cluster which caches a block_group and borrows its
free extents for allocation.
Since the introduction of allocation size classes in 6.1, there has been
a bug in the interaction between that feature and ssd_spread.
find_free_extent() has a number of nested loops. The loop going over the
allocation stages, stored in ffe_ctl->loop and managed by
find_free_extent_update_loop(), the loop over the raid levels, and the
loop over all the block_groups in a space_info. The size class feature
relies on the block_group loop to ensure it gets a chance to see a
block_group of a given size class. However, the clustered allocator
uses the cached cluster block_group and breaks that loop. Each call to
do_allocation() will really just go back to the same cached block_group.
Normally, this is OK, as the allocation either succeeds and we don't
want to loop any more or it fails, and we clear the cluster and return
its space to the block_group.
But with size classes, the allocation can succeed, then later fail,
outside of do_allocation() due to size class mismatch. That latter
failure is not properly handled due to the highly complex multi loop
logic. The result is a painful loop where we continue to allocate the
same num_bytes from the cluster in a tight loop until it fails and
releases the cluster and lets us try a new block_group. But by then, we
have skipped great swaths of the available block_groups and are likely
to fail to allocate, looping the outer loop. In pathological cases like
the reproducer below, the cached block_group is often the very last one,
in which case we don't perform this tight bg loop but instead rip
through the ffe stages to LOOP_CHUNK_ALLOC and allocate a chunk, which
is now the last one, and we enter the tight inner loop until an
allocation failure. Then allocation succeeds on the final block_group
and if the next allocation is a size mismatch, the exact same thing
happens again.
Triggering this is as easy as mounting with -o ssd_spread and then
running:
mount -o ssd_spread $dev $mnt
dd if=/dev/zero of=$mnt/big bs=16M count=1 &>/dev/null
dd if=/dev/zero of=$mnt/med bs=4M count=1 &>/dev/null
sync
if you do the two writes + sync in a loop, you can force btrfs to spin
an excessive amount on semi-successful clustered allocations, before
ultimately failing and advancing to the stage where we force a chunk
allocation. This results in 2G of data allocated per iteration, despite
only using ~20M of data. By using a small size classed extent, the inner
loop takes longer and we can spin for longer.
The simplest, shortest term fix to unbreak this is to make the clustered
allocator size_class aware in the dumbest way, where it fails on size
class mismatch. This may hinder the operation of the clustered
allocator, but better hindered than completely broken and terribly
overallocating.
Further re-design improvements are also in the works.
Fixes: 52bb7a2166af ("btrfs: introduce size class to block group allocator")
CC: stable@vger.kernel.org # 6.1+
Reported-by: David Sterba <dsterba@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7ebf381a69421a88265d3c49cd0f007ba7336c9d upstream.
During log replay, at add_inode_ref(), we return -ENOENT if our current
inode isn't found on the subvolume tree or if a parent directory isn't
found. The error comes from btrfs_iget_logging() <- btrfs_iget() <-
btrfs_read_locked_inode().
The single caller of add_inode_ref(), replay_one_buffer(), ignores an
-ENOENT error because it expects that error to mean only that a parent
directory wasn't found and that is ok.
Before commit 5f61b961599a ("btrfs: fix inode lookup error handling during
log replay") we were converting any error when getting a parent directory
to -ENOENT and any error when getting the current inode to -EIO, so our
caller would fail log replay in case we can't find the current inode.
After that commit however in case the current inode is not found we return
-ENOENT to the caller and therefore it ignores the critical fact that the
current inode was not found in the subvolume tree.
Fix this by converting -ENOENT to 0 when we don't find a parent directory,
returning -ENOENT when we don't find the current inode and making the
caller, replay_one_buffer(), not ignore -ENOENT anymore.
Fixes: 5f61b961599a ("btrfs: fix inode lookup error handling during log replay")
CC: stable@vger.kernel.org # 6.16
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
reservations
commit e41c75ca3189341e76e6af64b857c05b68a1d7db upstream.
Before waiting for the rescan worker to finish and flushing reservations,
we clear the BTRFS_FS_QUOTA_ENABLED flag from fs_info. If we fail flushing
reservations we leave with the flag not set which is not correct since
quotas are still enabled - we must set back the flag on error paths, such
as when we fail to start a transaction, except for error paths that abort
a transaction. The reservation flushing happens very early before we do
any operation that actually disables quotas and before we start a
transaction, so set back BTRFS_FS_QUOTA_ENABLED if it fails.
Fixes: af0e2aab3b70 ("btrfs: qgroup: flush reservations during quota disable")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3061801420469610c8fa6080a950e56770773ef1 upstream.
There are some reports of "unable to find chunk map for logical 2147483648
length 16384" error message appears in dmesg. This means some IOs are
occurring after a block group is removed.
When a metadata tree node is cleaned on a zoned setup, we keep that node
still dirty and write it out not to create a write hole. However, this can
make a block group's used bytes == 0 while there is a dirty region left.
Such an unused block group is moved into the unused_bg list and processed
for removal. When the removal succeeds, the block group is removed from the
transaction->dirty_bgs list, so the unused dirty nodes in the block group
are not sent at the transaction commit time. It will be written at some
later time e.g, sync or umount, and causes "unable to find chunk map"
errors.
This can happen relatively easy on SMR whose zone size is 256MB. However,
calling do_zone_finish() on such block group returns -EAGAIN and keep that
block group intact, which is why the issue is hidden until now.
Fixes: afba2bc036b0 ("btrfs: zoned: implement active zone tracking")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 62be7afcc13b2727bdc6a4c91aefed6b452e6ecc upstream.
btrfs_zone_finish() can fail for several reason. If it is -EAGAIN, we need
to try it again later. So, put the block group to the retry list properly.
Failing to do so will keep the removable block group intact until remount
and can causes unnecessary ENOSPC.
Fixes: 74e91b12b115 ("btrfs: zoned: zone finish unused block group")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2a5898c4aac67494c2f0f7fe38373c95c371c930 upstream.
If we failed walking a log tree during replay, we have a missing
transaction abort to prevent committing a transaction where we didn't
fully replay all the changes from a log tree and therefore can leave the
respective subvolume tree in some inconsistent state. So add the missing
transaction abort.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 55f7c65b2f69c7e4cb7aa7c1654a228ccf734fd8 upstream.
When deciding if a zoned filesystem is reaching the threshold to reclaim
data block groups, look at the size of the filesystem not to potentially
total available size of all drives in the filesystem.
Especially if a filesystem was created with mkfs' -b option, constraining
it to only a portion of the block device, the numbers won't match and
potentially garbage collection is kicking in too late.
Fixes: 3687fcb0752a ("btrfs: zoned: make auto-reclaim less aggressive")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 82e6381e23f1ea7a14f418215068aaa2ca046c84 upstream.
Various changes in the "ext4: better scalability for ext4 block
allocation" patch series have resulted in kunit test failures, most
notably in the test_new_blocks_simple and the test_mb_mark_used tests.
The root cause of these failures is that various in-memory ext4 data
structures were not getting initialized, and while previous versions
of the functions exercised by the unit tests didn't use these
structure members, this was arguably a test bug.
Since one of the patches in the block allocation scalability patches
is a fix which is has a cc:stable tag, this commit also has a
cc:stable tag.
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250714130327.1830534-1-libaokun1@huawei.com
Link: https://patch.msgid.link/20250725021550.3177573-1-yi.zhang@huaweicloud.com
Link: https://patch.msgid.link/20250725021654.3188798-1-yi.zhang@huaweicloud.com
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/linux-ext4/b0635ad0-7ebf-4152-a69b-58e7e87d5085@roeck-us.net/
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7d345aa1fac4c2ec9584fbd6f389f2c2368671d5 upstream.
The grp->bb_largest_free_order is updated regardless of whether
mb_optimize_scan is enabled. This can lead to inconsistencies between
grp->bb_largest_free_order and the actual s_mb_largest_free_orders list
index when mb_optimize_scan is repeatedly enabled and disabled via remount.
For example, if mb_optimize_scan is initially enabled, largest free
order is 3, and the group is in s_mb_largest_free_orders[3]. Then,
mb_optimize_scan is disabled via remount, block allocations occur,
updating largest free order to 2. Finally, mb_optimize_scan is re-enabled
via remount, more block allocations update largest free order to 1.
At this point, the group would be removed from s_mb_largest_free_orders[3]
under the protection of s_mb_largest_free_orders_locks[2]. This lock
mismatch can lead to list corruption.
To fix this, whenever grp->bb_largest_free_order changes, we now always
attempt to remove the group from its old order list. However, we only
insert the group into the new order list if `mb_optimize_scan` is enabled.
This approach helps prevent lock inconsistencies and ensures the data in
the order lists remains reliable.
Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@vger.kernel.org
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-12-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1c320d8e92925bb7615f83a7b6e3f402a5c2ca63 upstream.
Groups with no free blocks shouldn't be in any average fragment size list.
However, when all blocks in a group are allocated(i.e., bb_fragments or
bb_free is 0), we currently skip updating the average fragment size, which
means the group isn't removed from its previous s_mb_avg_fragment_size[old]
list.
This created "zombie" groups that were always skipped during traversal as
they couldn't satisfy any block allocation requests, negatively impacting
traversal efficiency.
Therefore, when a group becomes completely full, bb_avg_fragment_size_order
is now set to -1. If the old order was not -1, a removal operation is
performed; if the new order is not -1, an insertion is performed.
Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@vger.kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250714130327.1830534-11-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9d5eff7821f6d70f7d1b4d8a60680fba4de868a7 upstream.
We now do a weighted selection of server interfaces when allocating
new channels. The weights are decided based on the speed advertised.
The fulfilled weight for an interface is a counter that is used to
track the interface selection. It should be reset back to zero once
all interfaces fulfilling their weight.
In cifs_chan_update_iface, this reset logic was missing. As a result
when the server interface list changes, the client may not be able
to find a new candidate for other channels after all interfaces have
been fulfilled.
Fixes: a6d8fb54a515 ("cifs: distribute channels across interfaces based on speed")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b63335fb3d32579c5ff0b7038b9cc23688fff528 ]
collect_sample() is used to gather samples of the data in a Write op for
analysis to try and determine if the compression algorithm is likely to
achieve anything more quickly than actually running the compression
algorithm.
However, collect_sample() assumes that the data it is going to be sampling
is stored in an ITER_XARRAY-type iterator (which it now should never be)
and doesn't actually check that it is before accessing the underlying
xarray directly.
Fix this by replacing the code with a loop that just uses the standard
iterator functions to sample every other 2KiB block, skipping the
intervening ones. It's not quite the same as the previous algorithm as it
doesn't necessarily align to the pages within an ordinary write from the
pagecache.
Note that the btrfs code from which this was derived samples the inode's
pagecache directly rather than the iterator - but that doesn't necessarily
work for network filesystems if O_DIRECT is in operation.
Fixes: 94ae8c3fee94 ("smb: client: compress: LZ77 code improvements cleanup")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Enzo Matsumiya <ematsumiya@suse.de>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9768797c219326699778fba9cd3b607b2f1e7950 ]
The error occurs on the third attempt to encode extents. When function
ext_tree_prepare_commit() reallocates a larger buffer to retry encoding
extents, the "layoutupdate_pages" page array is initialized only after the
retry loop. But ext_tree_free_commitdata() is called on every iteration
and tries to put pages in the array, thus dereferencing uninitialized
pointers.
An additional problem is that there is no limit on the maximum possible
buffer_size. When there are too many extents, the client may create a
layoutcommit that is larger than the maximum possible RPC size accepted
by the server.
During testing, we observed two typical scenarios. First, one memory page
for extents is enough when we work with small files, append data to the
end of the file, or preallocate extents before writing. But when we fill
a new large file without preallocating, the number of extents can be huge,
and counting the number of written extents in ext_tree_encode_commit()
does not help much. Since this number increases even more between
unlocking and locking of ext_tree, the reallocated buffer may not be
large enough again and again.
Co-developed-by: Konstantin Evtushenko <koevtushenko@yandex.com>
Signed-off-by: Konstantin Evtushenko <koevtushenko@yandex.com>
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250630183537.196479-2-sergeybashirov@gmail.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d897d81671bc4615c80f4f3bd5e6b218f59df50c ]
When there are too many block extents for a layoutcommit, they may not
all fit into the maximum-sized RPC. This patch allows the generic pnfs
code to properly handle -ENOSPC returned by the block/scsi layout driver
and trigger additional layoutcommits if necessary.
Co-developed-by: Konstantin Evtushenko <koevtushenko@yandex.com>
Signed-off-by: Konstantin Evtushenko <koevtushenko@yandex.com>
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250630183537.196479-5-sergeybashirov@gmail.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7db6e66663681abda54f81d5916db3a3b8b1a13d ]
At the end of the isect translation, disc_addr represents the physical
disk offset. Thus, end calculated from disk_addr is also a physical disk
offset. Therefore, range checking should be done using map->disk_offset,
not map->start.
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250702133226.212537-1-sergeybashirov@gmail.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 81438498a285759f31e843ac4800f82a5ce6521f ]
Because of integer division, we need to carefully calculate the
disk offset. Consider the example below for a stripe of 6 volumes,
a chunk size of 4096, and an offset of 70000.
chunk = div_u64(offset, dev->chunk_size) = 70000 / 4096 = 17
offset = chunk * dev->chunk_size = 17 * 4096 = 69632
disk_offset_wrong = div_u64(offset, dev->nr_children) = 69632 / 6 = 11605
disk_chunk = div_u64(chunk, dev->nr_children) = 17 / 6 = 2
disk_offset = disk_chunk * dev->chunk_size = 2 * 4096 = 8192
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250701122341.199112-1-sergeybashirov@gmail.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
_smbd_get_connection
[ Upstream commit 550a194c5998e4e77affc6235e80d3766dc2d27e ]
It is already called long before we may hit this cleanup code path.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e23ab8028de0d92df5921a570f5212c0370db3b5 ]
Let's return errors caught by the generic checks. This fixes generic/494 where
it expects to see EBUSY by setattr_prepare instead of EINVAL by f2fs for active
swapfile.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 99f9a97dce39ad413c39b92c90393bbd6778f3fd ]
An infinite loop may occur if the following conditions occur due to
file system corruption.
(1) Condition for exfat_count_dir_entries() to loop infinitely.
- The cluster chain includes a loop.
- There is no UNUSED entry in the cluster chain.
(2) Condition for exfat_create_upcase_table() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and up-case table entry in the cluster
chain of the root directory.
(3) Condition for exfat_load_bitmap() to loop infinitely.
- The cluster chain of the root directory includes a loop.
- There are no UNUSED entry and bitmap entry in the cluster chain
of the root directory.
(4) Condition for exfat_find_dir_entry() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
(5) Condition for exfat_check_dir_empty() to loop infinitely.
- The cluster chain includes a loop.
- The unused directory entries were exhausted by some operation.
- All files and sub-directories under the directory are deleted.
This commit adds checks to break the above infinite loop.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c214006856ff52a8ff17ed8da52d50601d54f9ce ]
When computing the tree index in dbAllocAG, we never check if we are
out of bounds realative to the size of the stree.
This could happen in a scenario where the filesystem metadata are
corrupted.
Reported-by: syzbot+cffd18309153948f3c3e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cffd18309153948f3c3e
Tested-by: syzbot+cffd18309153948f3c3e@syzkaller.appspotmail.com
Signed-off-by: Arnaud Lecomte <contact@arnaud-lcm.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2d04df8116426b6c7b9f8b9b371250f666a2a2fb ]
The reproducer builds a corrupted file on disk with a negative i_size value.
Add a check when opening this file to avoid subsequent operation failures.
Reported-by: syzbot+630f6d40b3ccabc8e96e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=630f6d40b3ccabc8e96e
Tested-by: syzbot+630f6d40b3ccabc8e96e@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2d91b3765cd05016335cd5df5e5c6a29708ec058 ]
The fileset value of the inode copy from the disk by the reproducer is
AGGR_RESERVED_I. When executing evict, its hard link number is 0, so its
inode pages are not truncated. This causes the bugon to be triggered when
executing clear_inode() because nrpages is greater than 0.
Reported-by: syzbot+6e516bb515d93230bc7b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6e516bb515d93230bc7b
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cdfa1304657d6f23be8fd2bb0516380a3c89034e ]
sprintf() is discouraged for use with bounded destination buffers
as it does not prevent buffer overflows when the formatted output
exceeds the destination buffer size. snprintf() is a safer
alternative as it limits the number of bytes written and ensures
NUL-termination.
Replace sprintf() with snprintf() for copying the debug string
into a temporary buffer, using ORANGEFS_MAX_DEBUG_STRING_LEN as
the maximum size to ensure safe formatting and prevent memory
corruption in edge cases.
EDIT: After this patch sat on linux-next for a few days, Dan
Carpenter saw it and suggested that I use scnprintf instead of
snprintf. I made the change and retested.
Signed-off-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 099b847ccc6c1ad2f805d13cfbcc83f5b6d4bc42 ]
A syzbot fuzzed image triggered a BUG_ON in ext4_update_inline_data()
when an inode had the INLINE_DATA_FL flag set but was missing the
system.data extended attribute.
Since this can happen due to a maiciouly fuzzed file system, we
shouldn't BUG, but rather, report it as a corrupted file system.
Add similar replacements of BUG_ON with EXT4_ERROR_INODE() ii
ext4_create_inline_data() and ext4_inline_data_truncate().
Reported-by: syzbot+544248a761451c0df72f@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 33cfdd726381828b9907a61c038a9f48b6690a31 ]
Some servers might enforce the SPN to be set in the target info
blob (AV pairs) when sending NTLMSSP_AUTH message. In Windows Server,
this could be enforced with SmbServerNameHardeningLevel set to 2.
Fix this by always appending SPN (cifs/<hostname>) to the existing
list of target infos when setting up NTLMv2 response blob.
Cc: linux-cifs@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Reported-by: Pierguido Lambri <plambri@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b460249b9a1dab7a9f58483e5349d045ad6d585c ]
To query root path (without msearch wildcard) it is needed to
send pattern '\' instead of '' (empty string).
This allows to use CIFSFindFirst() to query information about root path
which is being used in followup changes.
This change fixes the stat() syscall called on the root path on the mount.
It is because stat() syscall uses the cifs_query_path_info() function and
it can fallback to the CIFSFindFirst() usage with msearch=false.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d9b13cdad80dc11d74408cf201939a946e9303a6 ]
If a lookup in tracefs is done on a file that does not exist, it leaves a
dentry hanging around until memory pressure removes it. But eventfs
dentries should hang around as when their ref count goes to zero, it
requires more work to recreate it. For the rest of the tracefs dentries,
they hang around as their dentry is used as a descriptor for the tracing
system. But if a file lookup happens for a file in tracefs that does not
exist, it should be deleted.
Add a .d_delete callback that checks if dentry->fsdata is set or not. Only
eventfs dentries set fsdata so if it has content it should not be deleted
and should hang around in the cache.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a099b09a3342a0b28ea330e405501b5b4d0424b4 ]
Previously, ext2_fiemap would unconditionally apply "len = min_t(u64, len,
i_size_read(inode));", When inode->i_size was 0 (for an empty file), this
would reduce the requested len to 0. Passing len = 0 to iomap_fiemap could
then result in an -EINVAL error, even for valid queries on empty files.
Link: https://github.com/linux-test-project/ltp/issues/1246
Signed-off-by: Wei Gao <wegao@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250613152402.3432135-1-wegao@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1a1ad73aa1a66787f05f7f10f686b74bab77be72 ]
Similar to commit 1ed95281c0c7 ("anon_inode: raise SB_I_NODEV and SB_I_NOEXEC"):
it shouldn't be possible to execute pidfds via
execveat(fd_anon_inode, "", NULL, NULL, AT_EMPTY_PATH)
so raise SB_I_NOEXEC so that no one gets any creative ideas.
Also raise SB_I_NODEV as we don't expect or support any devices on pidfs.
Link: https://lore.kernel.org/20250618-work-pidfs-persistent-v2-1-98f3456fd552@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b1e9d89408f402858c00103f9831b25ffa0994d3 ]
After applying this patch, could correctly create symlink:
ln -s "relative/path/to/file" symlink
Signed-off-by: Rong Zhang <ulin0208@gmail.com>
[almaz.alexandrovich@paragon-software.com: added cpu_to_le32 macro to
rs->Flags assignment]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e841ecb139339602bc1853f5f09daa5d1ea920a2 ]
The length of the file name should be smaller than the directory entry size.
Reported-by: syzbot+598057afa0f49e62bd23@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=598057afa0f49e62bd23
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2a8061ee5e41034eb14170ec4517b5583dbeff9f ]
We want a class that nests outside of I_MUTEX_NORMAL (for the sake of
callbacks that might want to lock the victim) and inside I_MUTEX_PARENT
(so that a variant of that could be used with parent of the victim
held locked by the caller).
In reality, simple_recursive_removal()
* never holds two locks at once
* holds the lock on parent of dentry passed to callback
* is used only on the trees with fixed topology, so the depths
are not changing.
So the locking order is actually fine.
AFAICS, the best solution is to assign I_MUTEX_CHILD to the locks
grabbed by that thing.
Reported-by: syzbot+169de184e9defe7fe709@syzkaller.appspotmail.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d3ed6d6981f4756f145766753c872482bc3b28d3 ]
The generic/001 test of xfstests suite fails and corrupts
the HFS volume:
sudo ./check generic/001
FSTYP -- hfs
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.15.0-rc2+ #3 SMP PREEMPT_DYNAMIC Fri Apr 25 17:13:00 PDT 2>
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/001 32s ... _check_generic_filesystem: filesystem on /dev/loop50 is inconsistent
(see /home/slavad/XFSTESTS-2/xfstests-dev/results//generic/001.full for details)
Ran: generic/001
Failures: generic/001
Failed 1 of 1 tests
fsck.hfs -d -n ./test-image.bin
** ./test-image.bin (NO WRITE)
Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K.
Executing fsck_hfs (version 540.1-Linux).
** Checking HFS volume.
The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
Unused node is not erased (node = 2)
Unused node is not erased (node = 4)
<skipped>
Unused node is not erased (node = 253)
Unused node is not erased (node = 254)
Unused node is not erased (node = 255)
Unused node is not erased (node = 256)
** Checking catalog hierarchy.
** Checking volume bitmap.
** Checking volume information.
Verify Status: VIStat = 0x0000, ABTStat = 0x0000 EBTStat = 0x0000
CBTStat = 0x0004 CatStat = 0x00000000
** The volume untitled was found corrupt and needs to be repaired.
volume type is HFS
primary MDB is at block 2 0x02
alternate MDB is at block 20971518 0x13ffffe
primary VHB is at block 0 0x00
alternate VHB is at block 0 0x00
sector size = 512 0x200
VolumeObject flags = 0x19
total sectors for volume = 20971520 0x1400000
total sectors for embedded volume = 0 0x00
This patch adds logic of clearing the deleted b-tree node.
sudo ./check generic/001
FSTYP -- hfs
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.15.0-rc2+ #3 SMP PREEMPT_DYNAMIC Fri Apr 25 17:13:00 PDT 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/001 9s ... 32s
Ran: generic/001
Passed all 1 tests
fsck.hfs -d -n ./test-image.bin
** ./test-image.bin (NO WRITE)
Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K.
Executing fsck_hfs (version 540.1-Linux).
** Checking HFS volume.
The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
** Checking catalog hierarchy.
** Checking volume bitmap.
** Checking volume information.
** The volume untitled appears to be OK.
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250430001211.1912533-1-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1a11201668e8635602577dcf06f2e96c591d8819 ]
Verify that number of partition maps isn't insanely high which can lead
to large allocation in udf_sb_alloc_partition_maps(). All partition maps
have to fit in the LVD which is in a single block.
Reported-by: syzbot+478f2c1a6f0f447a46bb@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5c8f12cf1e64e0e8e6cb80b0c935389973e8be8d ]
Clears up the warning added in 7ee3647243e5 ("migrate: Remove call to
->writepage") that occurs in various xfstests, causing "something found
in dmesg" failures.
[ 341.136573] gfs2_meta_aops does not implement migrate_folio
[ 341.136953] WARNING: CPU: 1 PID: 36 at mm/migrate.c:944 move_to_new_folio+0x2f8/0x300
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
