| Age | Commit message (Collapse) | Author |
|---|
|
Add support for Gen5 x4 PCIe QMP PHY found on Glymur platform.
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
Signed-off-by: Wenbin Yao <wenbin.yao@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Link: https://patch.msgid.link/20251103-glymur-pcie-upstream-v6-3-18a5e0a538dc@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The new Glymur SoC bumps up the HW version of QMP phy to v8.50 for PCIE
g5x4. Add the new PCS offsets in a dedicated header file.
Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com>
Signed-off-by: Wenbin Yao <wenbin.yao@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Link: https://patch.msgid.link/20251103-glymur-pcie-upstream-v6-2-18a5e0a538dc@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Initialize priv->lock to fix the following warning.
WARNING: CPU: 0 PID: 12 at kernel/locking/mutex.c:577 __mutex_lock+0x70c/0x8b8
Modules linked in:
Hardware name: Freescale i.MX8QM MEK (DT)
Call trace:
__mutex_lock+0x70c/0x8b8 (P)
mutex_lock_nested+0x24/0x30
imx_hsio_power_on+0x4c/0x764
phy_power_on+0x7c/0x12c
imx_pcie_host_init+0x1d0/0x4d4
dw_pcie_host_init+0x188/0x4b0
imx_pcie_probe+0x324/0x6f4
platform_probe+0x5c/0x98
really_probe+0xbc/0x29c
__driver_probe_device+0x78/0x12c
driver_probe_device+0xd8/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe4
__device_attach_async_helper+0xb8/0xdc
async_run_entry_fn+0x34/0xe0
process_one_work+0x220/0x694
worker_thread+0x1c0/0x36c
kthread+0x14c/0x224
Fixes: 82c56b6dd24f ("phy: freescale: imx8qm-hsio: Add i.MX8QM HSIO PHY driver support")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20250925013806.569658-1-xiaolei.wang@windriver.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Semicolons after end of function braces are not needed, remove them.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/a8807dafa87fcc3abcafd34a1895e4c722c39793.1758719985.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Certain platforms may not have the PHY_ENABLE bit set on power on reset.
Update the current sequence to explicitly write to enable the PHY_ENABLE
bit. This ensures that regardless of the platform, the PHY is properly
enabled.
Signed-off-by: Ronak Raheja <ronak.raheja@oss.qualcomm.com>
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20250920032158.242725-1-wesley.cheng@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The QMP USB3/DP Combo PHY hosts an USB3 phy and a DP PHY on top
of a combo glue to route either lanes to the 4 shared physical lanes.
The routing of the lanes can be:
- 2 DP + 2 USB3
- 4 DP
- 2 USB3
Get the lanes mapping from DT and stop registering the USB-C
muxes in favor of a static mode and orientation detemined
by the lanes mapping.
This allows supporting boards with direct connection of USB3 and
DisplayPort lanes to the QMP Combo PHY lanes, not using the
USB-C Altmode feature.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Xilin Wu <sophon@radxa.com> # qcs6490-radxa-dragon-q6a
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-topic-x1e80100-hdmi-v7-2-2bee0e66cc1b@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When PCIe link enters L1 PM substates, the PHY will turn off its
PLL for power-saving. However, it turns off the PLL too fast which
leads the PHY to be broken. According to the PHY document, we need
to delay PLL turnoff time.
Fixes: f13bff25161b ("phy: rockchip-naneng-combo: Support rk3562")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/1763459526-35004-2-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When PCIe link enters L1 PM substates, the PHY will turn off its
PLL for power-saving. However, it turns off the PLL too fast which
leads the PHY to be broken. According to the PHY document, we need
to delay PLL turnoff time.
Fixes: bbcca4fac873 ("phy: rockchip: naneng-combphy: Add RK3528 support")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/1763459526-35004-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The Renesas RZ/G3S supports a power saving mode where power to most of the
SoC components is turned off. The USB PHY is among these components.
Because of this the settings applied in driver probe need to be executed
also on resume path. On suspend path only reset signal need to be asserted.
Add suspend/resume support.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119120418.686224-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Move the check of phy_data->init_bus from rcar_gen3_phy_usb2_init_bus()
to rcar_gen3_phy_usb2_probe() to avoid having it duplicated in both the
probe path and the upcoming resume code. This is a preparatory patch.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119120418.686224-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
rcar_gen3_phy_usb2_probe()
If an error occurs after the reset_control_deassert(),
reset_control_assert() must be called, as already done in the remove
function.
Use devm_add_action_or_reset() to add the missing call and simplify the
.remove() function accordingly.
While at it, drop struct rcar_gen3_chan::rstc as it is not used aymore.
[claudiu.beznea: removed "struct reset_control *rstc = data;" from
rcar_gen3_reset_assert(), dropped struct rcar_gen3_chan::rstc]
Fixes: 4eae16375357 ("phy: renesas: rcar-gen3-usb2: Add support to initialize the bus")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251023135810.1688415-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit f4fb9c4d7f94 ("phy: exynos5-usbdrd: allow DWC3 runtime suspend
with UDC bound (E850+)") incorrectly added clk_bulk_disable() as the
inverse of clk_bulk_prepare_enable() while it should have of course
used clk_bulk_disable_unprepare(). This means incorrect reference
counts to the CMU driver remain.
Update the code accordingly.
Fixes: f4fb9c4d7f94 ("phy: exynos5-usbdrd: allow DWC3 runtime suspend with UDC bound (E850+)")
CC: stable@vger.kernel.org
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20251006-gs101-usb-phy-clk-imbalance-v1-1-205b206126cf@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Platform drivers can be probed after their init sections have been
discarded (e.g. on probe deferral or manual rebind through sysfs) so the
probe function and match table must not live in init.
Fixes: 783f6d3dcf35 ("phy: bcm63xx-usbh: Add BCM63xx USBH driver")
Cc: stable@vger.kernel.org # 5.9
Cc: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251017054537.6884-1-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
For MIPI mode, the inno-dsidphy found on RK3506 supports up to 2 lanes
and a maximum data rate of 1.5GHz.
Signed-off-by: Hongming Zou <hongming.zou@rock-chips.com>
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251106020632.92-7-kernel@airkyi.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add a driver for the FP9931/JD9930 regulator. Implement handling of the PG
(power good), TS_EN (temperature sensor enable), and EN (enable regulators)
pins. Implement the pair of symmetric LDOs as a single regulator because
they share a single voltage set register. For simplicity, just add the
temperature sensor (depending on external NTC) directly.
Limitations:
- As these regulators are controlled together with the VCOM regulator via
the EN pin, some kind of management must be in place. As the enable op
is not called when the regulator is already enabled, simple refcounting
seems not to work to avoid clearing EN when one regulator is still
enabled. As these regulators are typically used together, this
limitation should not hurt hard, just provide the is_enabled op.
- As the VCOM step is quite odd (5V/255 steps), rounding is needed.
Due to some limitations in the regulator core, the max/min voltages in
the devicetree must match the idea of the driver how to round things
exactly.
- Night mode is not implemented, so only the FP9931 compatible is needed in
the driver, there is no REGULATOR_MODE_NIGHT and no clear definition in
the datasheet what it does, also the XON pin which seems to be an input
related to that night mode is not used.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251115-fp9931-submit-v3-3-92f5d0772b68@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
GPIO machine lookup is a nice mechanism for associating GPIOs with
consumers if we don't know what kind of device the GPIO provider is or
when it will become available. However in the case of the reset-gpio, we
are already holding a reference to the device and so can reference its
firmware node. Let's setup a software node that references the relevant
GPIO and attach it to the auxiliary device we're creating.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
As the reset-gpio devices are purely virtual and never instantiated from
real firmware nodes, let's convert the driver to using the - more
fitting - auxiliary bus.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Auxiliary devices really do need a parent so ahead of converting the
reset-gpios driver to registering on the auxiliary bus, make the GPIO
device that provides the reset GPIO the parent of the reset-gpio device.
To that end move the lookup of the GPIO device by fwnode to the
beginning of __reset_add_reset_gpio_device() which has the added benefit
of bailing out earlier, before allocating resources for the virtual
device, if the chip is not up yet.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
For better readability and easier maintenance order the includes
alphabetically.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
When doing a software node lookup, we require both the fwnode that
references a GPIO chip as well as the node associated with that chip to
be software nodes. However, we now allow referencing generic firmware
nodes from software nodes in driver core so we should allow the same in
GPIO core. Make the software node name check optional and dependent on
whether the referenced firmware node is a software node. If it's not,
just continue with the lookup.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
On some systems the cs42l43 has amplifiers attached to its SPI
controller that are not properly defined in ACPI. Currently
software nodes are added to support this case, however, the chip
selects for these devices are specified using a hack. A software
node is added with the same name as the pinctrl driver, as the
look up was name based, this allowed the GPIO look up to return
the pinctrl driver even though the swnode was not owned by it.
This was necessary as the swnodes did not support directly
linking to real firmware nodes.
Since commit e5d527be7e69 ("gpio: swnode: don't use the swnode's
name as the key for GPIO lookup") changed the lookup to be
fwnode based this hack will no longer find the pinctrl driver,
resulting in the driver not probing. There is no pinctrl driver
attached to the swnode itself. But other patches did add support
for linking a swnode to a real fwnode node [1]. As such the hack
is no longer needed, so switch over to just passing the real
fwnode for the pinctrl property to avoid any issues.
[Bartosz:
- remove unneeded Fixes: tag,
- use PROPERTY_ENTRY_REF_ARRAY() instead of PROPERTY_ENTRY_REF_ARRAY_LEN()]
Link: https://lore.kernel.org/linux-gpio/20251106-reset-gpios-swnodes-v6-0-69aa852de9e4@linaro.org/ [1]
Fixes: 439fbc97502a ("spi: cs42l43: Add bridged cs35l56 amplifiers")
Cc: stable+noautosel@kernel.org # Don't backport, previous approach works, fix relies on swnode changes
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
At the moment software nodes can only reference other software nodes.
This is a limitation for devices created, for instance, on the auxiliary
bus with a dynamic software node attached which cannot reference devices
the firmware node of which is "real" (as an OF node or otherwise).
Make it possible for a software node to reference all firmware nodes in
addition to static software nodes. To that end: add a second pointer to
struct software_node_ref_args of type struct fwnode_handle. The core
swnode code will first check the swnode pointer and if it's NULL, it
will assume the fwnode pointer should be set.
Software node graphs remain the same, as in: the remote endpoints still
have to be software nodes.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Once we allow software nodes to reference other kinds of firmware nodes,
the node in args will no longer necessarily be a software node so bump
its reference count using its fwnode interface.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Once we allow software nodes to reference all kinds of firmware nodes,
the refnode here will no longer necessarily be a software node so read
its proprties going through its fwnode implementation.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
We could go to the USB consortium, but it's probably
easier that way.
And update HID usage table json generated file from
https://usb.org/sites/default/files/hut1_6.pdf updated: 01/30/2025
Reported-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/191
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Same issues with a secondary tip switch instead of secondary barrel
switch as the Kamvas 19.
Copy the stable Kamvas 19 support back into testing and add the vid/pid
for the Kamvas 27.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/189
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
When pressing the phsyical eraser button (remapped by us to the
Secondary Barrel Switch) while the tip is down, the device
gives us several false reports with a Tip Switch 0:
press| |release
SBS: [0 0 ... 1 1 1 ... 1 0 0 0 0 0 0 ...]
TS: [1 1 ... 1 0 1 ... 1 1 0 0 0 1 1 ...]
In both press/release the number of Tip Switch 0 reports can be up to 4
and *sometimes* the Tip Switch is released in the same report
as the button press/release event.
Paper over this by forcing the tip down for a few reports if it was down
before the button toggled.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/195
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Modifies report to have tablet buttons report as buttons, rather than as
keyboard key combinations. The dial is also converted to a relative
input, using the dedicated bit previously reserved for modifier key
information.
Signed-off-by: Hannah Pittman <dev@hannahl.co.uk>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/203
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This device needs a fix for the tilt range on the pen report descriptor
and the usual conversion of the pad keys from the firmware's hardcoded
keyboard shortcuts to actual pad buttons.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/185
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Several bugs as outlined in udev-hid-bpf#66 and udev-hid-bpf!198:
- pressure curve is far from linear
- tilt range is ±60, not ±127
- pressing the second button sets both tip down and
barrel switch
Fix the second button by adding a Secondary Barrel Switch in the
existing padding and check for the tip down/barrel switch down combo.
When both values become true at the same time, set the Secondary Barrel
Switch instead.
Implement a custom pressure curve that maps the hardware range 0-102
linearly to the logical range 0-1224, and maps the hardware range
103-2047 logarithmically to the logical range 1232-2047. This mapping
isn’t perfect, but it’s way more natural than the stock configuration.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jan Felix Langenbach <JanFelix.Langenbach@protonmail.com>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/200
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The 3Dconnexion SpaceNavigator HID report descriptor declares its axis
data to be "relative" when it is actually "absolute". This quirk was
addressed in the kernel in 2.6.33, but some SpaceNavigator variants have
a slightly different report descriptor whose axis input items are at
different offsets than those assumed by the kernel fixup.
Add a BPF fixup to handle both sets of offsets for known SpaceNavigator
variants if the descriptor has not already been fixed by the kernel.
Signed-off-by: Curran Muhlberger <curran@cs.cornell.edu>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/181
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Another Huion Kamvas tablet support.
Again it's safer to duplicate the code source in a separate file to
ensure we are not breaking any existing device.
Signed-off-by: Higgins Dragon <higgins@higginsdragon.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/207
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This assumes that the tablet has been switched into vendor mode (by
using huion-switcher[1], for example) and is sending events using
Huion's proprietary data format.
This has been tested using the PW600L pen, which does not have an
eraser. There is no expectation that a pen with an eraser will work at
this time.
[1] https://github.com/whot/huion-switcher
Signed-off-by: Nicholas LaPointe <nicholaslapointe8@gmail.com>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/162
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
There are a differences in the report descriptor to the existing
Inspiroy 2S which makes having this as separate file a more efficient
approach than merging them together.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/167
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
U-Blox M8/M9 chip have a pin to start it in safeboot mode, to be used
to recover from situations where the flash content has become
corrupted and needs to be restored. If this pin is asserted at power
up/reset, the receiver starts in safeboot mode and GNSS operation is
disabled.
Deassert the safeboot pin when probing this driver.
Signed-off-by: Alejandro Enrique <alejandroe1@geotab.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250911-ubx-safeboot-v3-2-32fe6b882a3c@geotab.com
[ johan: deassert after requesting supplies ]
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
be_insert_vlan_in_pkt() is called with the wrb_params argument being NULL
at be_send_pkt_to_bmc() call site. This may lead to dereferencing a NULL
pointer when processing a workaround for specific packet, as commit
bc0c3405abbb ("be2net: fix a Tx stall bug caused by a specific ipv6
packet") states.
The correct way would be to pass the wrb_params from be_xmit().
Fixes: 760c295e0e8d ("be2net: Support for OS2BMC.")
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://patch.msgid.link/20251119105015.194501-1-a.vatoropin@crpt.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.18
- Admin queue use-after-free fix (Keith)
- Target authentication fix (Alistar)
- Multipath lockdeup fix (Shin'ichiro)
- FC transport teardown fixes (Ewan)"
* tag 'nvme-6.18-2025-11-20' of git://git.infradead.org/nvme:
nvme: nvme-fc: Ensure ->ioerr_work is cancelled in nvme_fc_delete_ctrl()
nvme: nvme-fc: move tagset removal to nvme_fc_delete_ctrl()
nvme-multipath: fix lockdep WARN due to partition scan work
nvmet-auth: update sc_c in target host hash calculation
nvme: fix admin request_queue lifetime
|
|
Add an auxiliary (aux) device to support RoCE. The base driver is
responsible for creating the auxiliary device and allocating the
required resources to it, which will be owned by the bnge RoCE
driver in future patches.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Link: https://patch.msgid.link/20251117171136.128193-2-siva.kallam@broadcom.com
Reviewed-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Simplify the loop looking up a candidate idle state in the case when an
intercept is likely to occur by adding a search for the state index limit
if the tick is stopped before it.
First, call tick_nohz_tick_stopped() just once and if it returns true,
look for the shallowest state index below the current candidate one with
target residency at least equal to the tick period length.
Next, simply look for a state that is not shallower than the one found
in the previous step and satisfies the intercepts majority condition (if
there are no such states, the shallowest state that is not shallower
than the one found in the previous step becomes the new candidate).
Since teo_state_ok() has no callers any more after the above changes,
drop it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
[ rjw: Changelog clarification and code comment edit ]
Link: https://patch.msgid.link/2418792.ElGaqSPkdT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Driver is not creating the debugfs hooks for CQ coalesc parameters
because of a wrong check. Fixed the condition check inside
bnxt_re_init_cq_coal_debugfs().
Fixes: cf2749079011 ("RDMA/bnxt_re: Add a debugfs entry for CQE coalescing tuning")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20251117061306.1140588-1-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Bean Huo <beanhuo@iokpp.de> says:
This patch series introduces OP-TEE based RPMB (Replay Protected
Memory Block) support for UFS devices, extending the kernel-level
secure storage capabilities that are currently available for eMMC
devices.
Previously, OP-TEE required a userspace supplicant to access RPMB
partitions, which created complex dependencies and reliability issues,
especially during early boot scenarios. Recent work by Linaro has
moved core supplicant functionality directly into the Linux kernel for
eMMC devices, eliminating userspace dependencies and enabling
immediate secure storage access. This series extends the same approach
to UFS devices, which are used in enterprise and mobile applications
that require secure storage capabilities.
Benefits:
- Eliminates dependency on userspace supplicant for UFS RPMB access
- Enables early boot secure storage access (e.g., fTPM, secure UEFI
variables)
- Provides kernel-level RPMB access as soon as UFS driver is
initialized
- Removes complex initramfs dependencies and boot ordering
requirements
- Ensures reliable and deterministic secure storage operations
- Supports both built-in and modular fTPM configurations.
Prerequisites:
--------------
This patch series depends on commit 7e8242405b94 ("rpmb: move struct
rpmb_frame to common header") which has been merged into mainline
v6.18-rc2.
Link: https://patch.msgid.link/20251107230518.4060231-1-beanhuo@iokpp.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The PWM signal from the LPG channel can be routed to PMIC GPIOs with
proper GPIO configuration, and it is not necessary to enable the
TRILED channel in that case. This also applies to the LPG channels
that mapped to TRILED channels. Additionally, enabling the TRILED
channel unnecessarily would cause a voltage increase in its power
supply. Hence remove it.
Fixes: 24e2d05d1b68 ("leds: Add driver for Qualcomm LPG")
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://patch.msgid.link/20251119-lpg_triled_fix-v3-2-84b6dbdc774a@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The zloop driver advertises REQ_NOWAIT support through BLK_FEAT_NOWAIT
(enabled by default for all blk-mq devices), and honors the nowait
behavior throughout zloop_queue_rq().
However, actual I/O to the backing file is performed in a workqueue,
where blocking is allowed.
To avoid imposing unnecessary non-blocking constraints in this blocking
context, clear the REQ_NOWAIT flag before processing the request in the
workqueue context.
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The loop driver advertises REQ_NOWAIT support through BLK_FEAT_NOWAIT
(enabled by default for all blk-mq devices), and honors the nowait
behavior throughout loop_queue_rq().
However, actual I/O to the backing file is performed in a workqueue,
where blocking is allowed.
To avoid imposing unnecessary non-blocking constraints in this blocking
context, clear the REQ_NOWAIT flag before processing the request in the
workqueue context.
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert the Renesas R-Car Gen3 thermal driver from SIMPLE_DEV_PM_OPS()
to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(). This lets us drop the
__maybe_unused annotation from its resume callback, and reduces kernel
size in case CONFIG_PM or CONFIG_PM_SLEEP is disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/813ad36fdc8561cf1c396230436e8ff3ff903a1f.1763117455.git.geert+renesas@glider.be
|
|
Use the existing helper functions to simplify the logic of
__reserved_mem_alloc_size()
Signed-off-by: Yuntao Wang <yuntao.wang@linux.dev>
Link: https://patch.msgid.link/20251115134753.179931-9-yuntao.wang@linux.dev
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Use the existing helper functions to simplify the logic of
fdt_scan_reserved_mem_reg_nodes()
Signed-off-by: Yuntao Wang <yuntao.wang@linux.dev>
Link: https://patch.msgid.link/20251115134753.179931-8-yuntao.wang@linux.dev
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Use the existing helper functions to simplify the logic of
__reserved_mem_reserve_reg()
Signed-off-by: Yuntao Wang <yuntao.wang@linux.dev>
Link: https://patch.msgid.link/20251115134753.179931-7-yuntao.wang@linux.dev
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Use the existing helper functions to simplify the logic of
early_init_dt_scan_memory()
Signed-off-by: Yuntao Wang <yuntao.wang@linux.dev>
Link: https://patch.msgid.link/20251115134753.179931-6-yuntao.wang@linux.dev
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
When reading the fdt_size value, the argument passed to dt_mem_next_cell()
is dt_root_addr_cells, but it should be dt_root_size_cells.
The same issue occurs when reading the scratch_size value.
Use a helper function to simplify the code and fix these issues.
Fixes: 274cdcb1c004 ("arm64: add KHO support")
Signed-off-by: Yuntao Wang <yuntao.wang@linux.dev>
Link: https://patch.msgid.link/20251115134753.179931-5-yuntao.wang@linux.dev
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
