| Age | Commit message (Collapse) | Author |
|---|
|
Use a more a descriptive name for the error label that is used to put
the reference to dev.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251208153524.68637-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make sure to drop the reference taken when looking up the th device
during output device open() on errors and on close().
Note that a recent commit fixed the leak in a couple of open() error
paths but not all of them, and the reference is still leaking on
successful open().
Fixes: 39f4034693b7 ("intel_th: Add driver infrastructure for Intel(R) Trace Hub devices")
Fixes: 6d5925b667e4 ("intel_th: Fix error handling in intel_th_output_open")
Cc: stable@vger.kernel.org # 4.4: 6d5925b667e4
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251208153524.68637-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The `COMEDI_RANGEINFO` ioctl does not work properly for subdevice
indices above 15. Currently, the only in-tree COMEDI drivers that
support more than 16 subdevices are the "8255" driver and the
"comedi_bond" driver. Making the ioctl work for subdevice indices up to
255 is achievable. It needs minor changes to the handling of the
`COMEDI_RANGEINFO` and `COMEDI_CHANINFO` ioctls that should be mostly
harmless to user-space, apart from making them less broken. Details
follow...
The `COMEDI_RANGEINFO` ioctl command gets the list of supported ranges
(usually with units of volts or milliamps) for a COMEDI subdevice or
channel. (Only some subdevices have per-channel range tables, indicated
by the `SDF_RANGETYPE` flag in the subdevice information.) It uses a
`range_type` value and a user-space pointer, both supplied by
user-space, but the `range_type` value should match what was obtained
using the `COMEDI_CHANINFO` ioctl (if the subdevice has per-channel
range tables) or `COMEDI_SUBDINFO` ioctl (if the subdevice uses a
single range table for all channels). Bits 15 to 0 of the `range_type`
value contain the length of the range table, which is the only part that
user-space should care about (so it can use a suitably sized buffer to
fetch the range table). Bits 23 to 16 store the channel index, which is
assumed to be no more than 255 if the subdevice has per-channel range
tables, and is set to 0 if the subdevice has a single range table. For
`range_type` values produced by the `COMEDI_SUBDINFO` ioctl, bits 31 to
24 contain the subdevice index, which is assumed to be no more than 255.
But for `range_type` values produced by the `COMEDI_CHANINFO` ioctl,
bits 27 to 24 contain the subdevice index, which is assumed to be no
more than 15, and bits 31 to 28 contain the COMEDI device's minor device
number for some unknown reason lost in the mists of time. The
`COMEDI_RANGEINFO` ioctl extract the length from bits 15 to 0 of the
user-supplied `range_type` value, extracts the channel index from bits
23 to 16 (only used if the subdevice has per-channel range tables),
extracts the subdevice index from bits 27 to 24, and ignores bits 31 to
28. So for subdevice indices 16 to 255, the `COMEDI_SUBDINFO` or
`COMEDI_CHANINFO` ioctl will report a `range_type` value that doesn't
work with the `COMEDI_RANGEINFO` ioctl. It will either get the range
table for the subdevice index modulo 16, or will fail with `-EINVAL`.
To fix this, always use bits 31 to 24 of the `range_type` value to hold
the subdevice index (assumed to be no more than 255). This affects the
`COMEDI_CHANINFO` and `COMEDI_RANGEINFO` ioctls. There should not be
anything in user-space that depends on the old, broken usage, although
it may now see different values in bits 31 to 28 of the `range_type`
values reported by the `COMEDI_CHANINFO` ioctl for subdevices that have
per-channel subdevices. User-space should not be trying to decode bits
31 to 16 of the `range_type` values anyway.
Fixes: ed9eccbe8970 ("Staging: add comedi core")
Cc: stable@vger.kernel.org #5.17+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251203162438.176841-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The devm_kmalloc() function never returns error pointers, it returns
NULL on error. Fix the error checking.
Fixes: 4863cb2b0f50 ("mux: mmio: Add suspend and resume support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/aSsIP7oKrhKfCUv3@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The existing 1ms delay in sd_power_on is insufficient and causes resume
errors around 4% of the time.
Increasing the delay to 5ms resolves this issue after testing 300
s2idle cycles.
Fixes: 1f311c94aabd ("mmc: rtsx: add 74 Clocks in power on flow")
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Link: https://patch.msgid.link/20260105060236.400366-3-matthew.schwartz@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When rtsx_pci suspends, the card reader hardware powers off but the sdmmc
driver's prev_power_state remains as MMC_POWER_ON. This causes sd_power_on
to skip reinitialization on the next I/O request, leading to DMA transfer
timeouts and errors on resume 20% of the time.
Add a power_off slot callback so the PCR can notify the sdmmc driver
during suspend. The sdmmc driver resets prev_power_state, and sd_request
checks this to reinitialize the card before the next I/O.
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Link: https://patch.msgid.link/20260105060236.400366-2-matthew.schwartz@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Using MMC_CAP_AGGRESSIVE_PM on RTS525A card readers causes game
performance issues when the card reader comes back from idle into active
use. This can be observed in Hades II when loading new sections of the
game or menu after the card reader puts itself into idle, and presents
as a 1-2 second hang.
Add EXTRA_CAPS_NO_AGGRESSIVE_PM quirk to allow cardreader drivers to
opt-out of aggressive PM, and set it for RTS525A.
Closes: https://lore.kernel.org/linux-mmc/ff9a7c20-f465-4afa-bf29-708d4a52974a@linux.dev/
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Link: https://patch.msgid.link/20260103204226.71752-1-matthew.schwartz@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop the leading "CONFIG_" when referring to Kconfig symbols--
it is supplied by the kconfig software.
This make the default values work as (apparently) expected.
Fixes: a02509f301c6 ("stm class: Factor out default framing protocol")
Fixes: d69d5e83110f ("stm class: Add MIPI SyS-T protocol support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251228190502.2480758-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Modify comments in fifo_icap.c to prevent all kernel-doc warnings:
Warning: fifo_icap.c:51 This comment starts with '/**', but isn't a
kernel-doc comment.
* HwIcap Device Interrupt Status/Enable Registers
Warning: fifo_icap.c:106 No description found for return value
of 'fifo_icap_fifo_read'
Warning: fifo_icap.c:160 No description found for return value
of 'fifo_icap_get_status'
Warning: fifo_icap.c:171 No description found for return value
of 'fifo_icap_busy'
Warning: fifo_icap.c:184 No description found for return value
of 'fifo_icap_write_fifo_vacancy'
Warning: fifo_icap.c:196 No description found for return value
of 'fifo_icap_read_fifo_occupancy'
Warning: fifo_icap.c:207 bad line:
Warning: fifo_icap.c:214 No description found for return value
of 'fifo_icap_set_configuration'
Warning: fifo_icap.c:290 function parameter 'frame_buffer' not described
in 'fifo_icap_get_configuration'
Warning: fifo_icap.c:290 function parameter 'num_words' not described
in 'fifo_icap_get_configuration'
Warning: fifo_icap.c:290 No description found for return value
of 'fifo_icap_get_configuration'
Warning: fifo_icap.c:357 expecting prototype for buffer_icap_reset().
Prototype was for fifo_icap_reset() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20251214191750.2173225-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The kgdbts_option_setup() function is invoked only once early in boot
via the __setup("kgdbts=", ...) mechanism to parse the kernel
command-line option.After init is complete, it is never called again.
Annotating it with __init places the function in the .init.text section,
enabling the kernel to free its code memory during the init memory
cleanup phase (free_initmem()). This reduces the kernel’s runtime
memory footprint with no functional side effects.
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Link: https://patch.msgid.link/20251208130525.2775885-1-pengcan@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fake "comedi_test" device currently has two subdevices: an analog
input subdevice, and an analog output subdevice. To make it a bit more
useful for testing, add a third subdevice for digital I/O.
The new DIO subdevice has 32 channels with each channel individually
programmable as an input or an output. To add a bit of interaction,
channels 0 to 15 are wired to channels 16 to 31 (0 to 16, 1 to 17,
etc.), and the state of each wire can be read back on both of the
channels connected to it. The outputs are modelled as NPN open
collector outputs with a pull-up resistor on the wire, so the state of
each wire (and the value read back from each channel connected to it)
will be logic level 1 unless either channel is configured as an output
at logic level 0.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251210124455.69131-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The main mutex in a comedi device can get held for quite a while when
processing comedi instructions, so for performance reasons, the "read",
"write", and "poll" file operations do not use it; they use the
`attach_lock` rwsemaphore to protect against the comedi device becoming
detached at an inopportune moment. As an alternative to using the
"read" and "write" operations, user-space can mmap the data buffer and
use the `COMEDI_BUFINFO` ioctl to manage data transfer through the
buffer. However, the "ioctl" file handler currently locks the main
mutex for all ioctl commands. Make the handling of the `COMEDI_BUFINFO`
an exception, using the `attach_lock` rwsemaphore during normal
operation. However, before it calls `do_become_nonbusy()` at the end of
acquisition, it does need to lock the main mutex, but it needs to unlock
the `attach_lock` rwsemaphore first to avoid deadlock. After locking
the main mutex, it needs to check that it is still in a suitable state
to become non-busy, because things may have changed while unlocked.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251205131332.16672-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix following sparse warning:
CHECK drivers/bus/fsl-mc/fsl-mc-bus.c
drivers/bus/fsl-mc/fsl-mc-bus.c:435:26: warning: symbol 'fsl_mc_bus_dpdbg_type' was not declared. Should it be static?
fsl_mc_bus_dpdbg_type is not used outside of fsl-mc-bus.c
Remove the EXPORT_SYMBOL and declare it static.
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Link: https://patch.msgid.link/628c49881b3a1df76cfd2f8fd2aad976692a465a.1768566053.git.chleroy@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These are nearly identical to the respective driver callbacks. The only
difference is that .remove() returns void instead of int.
The objective is to get rid of users of struct device_driver callbacks
.probe() and .remove() to eventually remove these.
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260113145012.2379944-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In ni_usb_init(), if ni_usb_setup_init() fails, the function returns
-EFAULT without freeing the allocated writes buffer, leading to a
memory leak.
Additionally, ni_usb_setup_init() returns 0 on failure, which causes
ni_usb_init() to return -EFAULT, an inappropriate error code for this
situation.
Fix the leak by freeing writes in the error path. Modify
ni_usb_setup_init() to return -EINVAL on failure and propagate this
error code in ni_usb_init().
Fixes: 4e127de14fa7 ("staging: gpib: Add National Instruments USB GPIB driver")
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Suggested-by: Dave Penkler <dpenkler@gmail.com>
Co-developed-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20251230034546.929452-1-zilin@seu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If ni_usb_receive_bulk_msg() succeeds but without reading 16 bytes, then
the error code needs to be set. The current code returns success.
Fixes: 4e127de14fa7 ("staging: gpib: Add National Instruments USB GPIB driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aSlMpbE4IrQuBGFS@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This accidentally returns 1 on error, but it should return negative
error codes.
Fixes: 9dde4559e939 ("staging: gpib: Add GPIB common core driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aSlMnaT1M104NJb2@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver is useful if at least one DRM driver registers an auxiliary device
for the ME interface. With the addition of Xe, this is no longer just i915.
Cc: Usyskin, Alexander <alexander.usyskin@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://patch.msgid.link/20260107182615.488194-5-Simon.Richter@hogyros.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While this is not a particularly useful configuration, the MEI code should
compile even when no drivers for a GPU containing a management engine are
built.
Cc: Usyskin, Alexander <alexander.usyskin@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://patch.msgid.link/20260107182615.488194-4-Simon.Richter@hogyros.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These are enumerated via an auxiliary bus, so there is no functional
dependency between these drivers, therefore allow compiling MEI as builtin
even when i915/xe are built as modules.
Cc: Usyskin, Alexander <alexander.usyskin@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://patch.msgid.link/20260107182615.488194-3-Simon.Richter@hogyros.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The xe driver supports dGPUs which can be plugged into non-x86 machines,
and exposes a MEI GSC interface, so this driver is no longer x86 only.
Cc: Usyskin, Alexander <alexander.usyskin@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://patch.msgid.link/20260107182615.488194-2-Simon.Richter@hogyros.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add Kunit test cases for the revocable API.
The test cases cover the following scenarios:
- Basic: Verifies that a consumer can successfully access the resource
provided via the provider.
- Revocation: Verifies that after the provider revokes the resource,
the consumer correctly receives a NULL pointer on a subsequent access.
- Try Access Macro: Same as "Revocation" but uses the
REVOCABLE_TRY_ACCESS_WITH() and REVOCABLE_TRY_ACCESS_SCOPED().
A way to run the test:
$ ./tools/testing/kunit/kunit.py run \
--kconfig_add CONFIG_REVOCABLE_KUNIT_TEST=y \
revocable_test
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260116080235.350305-3-tzungbi@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some resources can be removed asynchronously, for example, resources
provided by a hot-pluggable device like USB. When holding a reference
to such a resource, it's possible for the resource to be removed and
its memory freed, leading to use-after-free errors on subsequent access.
The "revocable" mechanism addresses this by establishing a weak reference
to a resource that might be freed at any time. It allows a resource
consumer to safely attempt to access the resource, guaranteeing that the
access is valid for the duration of its use, or it fails safely if the
resource has already been revoked.
The implementation uses a provider/consumer model built on Sleepable
RCU (SRCU) to guarantee safe memory access:
- A resource provider, such as a driver for a hot-pluggable device,
allocates a struct revocable_provider and initializes it with a pointer
to the resource.
- A resource consumer that wants to access the resource allocates a
struct revocable which acts as a handle containing a reference to the
provider.
- To access the resource, the consumer uses revocable_try_access().
This function enters an SRCU read-side critical section and returns
the pointer to the resource. If the provider has already freed the
resource, it returns NULL. After use, the consumer calls
revocable_withdraw_access() to exit the SRCU critical section. The
REVOCABLE_TRY_ACCESS_WITH() and REVOCABLE_TRY_ACCESS_SCOPED() are
convenient helpers for doing that.
- When the provider needs to remove the resource, it calls
revocable_provider_revoke(). This function sets the internal resource
pointer to NULL and then calls synchronize_srcu() to wait for all
current readers to finish before the resource can be completely torn
down.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260116080235.350305-2-tzungbi@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log. Since commit ad67b74d2469 ("printk: hash
addresses printed with %p") the regular %p has been improved to avoid
this issue. Furthermore, restricted pointers ("%pK") were never meant
to be used through printk(). They can still unintentionally leak raw
pointers or acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through
seq_file, for which its usage is safe.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260107-restricted-pointers-binder-v1-1-181018bf3812@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To ensure correct handling of endianness in the QMI subsystem, the
QMI_DATA_LEN field used in host-side drivers remains in CPU-native byte
order. Remove unnecessary endianness conversions, considering that
QMI_DATA_LEN is always of type `u32` on the host. On the QMI wire
interface, however, its representation is variable and may use either 1 or
2 bytes.
Signed-off-by: Alexander Wilhelm <alexander.wilhelm@westermo.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251119104008.3505152-4-alexander.wilhelm@westermo.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Extend the QMI byte encoding and decoding logic to support multiple basic
data type sizes (u8, u16, u32, u64) using differnet macros for each type.
Ensure correct handling of data sizes and proper byte order conversion on
big-endian platforms by consistently applying these macros during encoding
and decoding of basic elements.
Signed-off-by: Alexander Wilhelm <alexander.wilhelm@westermo.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251119104008.3505152-3-alexander.wilhelm@westermo.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Extend handling of QMI basic element types to also capture error codes.
This is required for big-endian platforms where a simple memcpy is not
sufficient and exact data type knowledge is necessary.
Signed-off-by: Alexander Wilhelm <alexander.wilhelm@westermo.com>
Link: https://lore.kernel.org/r/20251119104008.3505152-2-alexander.wilhelm@westermo.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
There is currently an inconsistency between C and Rust, which is that
when Rust requires cfg(CONFIG_COMPAT) on compat_ioctl when using the
compat_ptr_ioctl symbol because '#define compat_ptr_ioctl NULL' does not
get translated to anything by bindgen.
But it's not *just* a matter of translating the '#define' into Rust when
CONFIG_COMPAT=n. This is because when CONFIG_COMPAT=y, the type of
compat_ptr_ioctl is a non-nullable function pointer, and to seamlessly
use it regardless of the config, we need a nullable function pointer.
I think it's important to do something about this; I've seen the mistake
of accidentally forgetting '#[cfg(CONFIG_COMPAT)]' when compat_ptr_ioctl
is used multiple times now.
This explicitly declares 'bindings::compat_ptr_ioctl' as an Option that
is always defined but might be None. This matches C, but isn't ideal:
it modifies the bindings crate. But I'm not sure if there's a better way
to do it. If we just redefine in kernel/, then people may still use the
one in bindings::, since that is where you would normally find it. I am
open to suggestions.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260105-redefine-compat_ptr_ioctl-v1-1-25edb3d91acc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The KMSG_COMPONENT macro is a leftover of the s390 specific "kernel message
catalog" from 2008 [1] which never made it upstream.
The macro was added to s390 code to allow for an out-of-tree patch which
used this to generate unique message ids. Also this out-of-tree doesn't
exist anymore.
Remove the macro in order to get rid of a pointless indirection.
[1] https://lwn.net/Articles/292650/
Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://patch.msgid.link/20251126142909.2140015-1-hca@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fintek F81504/508/512 can support both RTS_ON_SEND and RTS_AFTER_SEND,
but pci_fintek_rs485_supported only announces the former.
This makes it impossible to unset SER_RS485_RTS_ON_SEND from
userspace because of uart_sanitize_serial_rs485(). Some devices
with these chips need RTS low on TX, so they are effectively broken.
Fix this by announcing the support for SER_RS485_RTS_AFTER_SEND,
similar to commit 068d35a7be65 ("serial: sc16is7xx: announce support
for SER_RS485_RTS_ON_SEND").
Fixes: 4afeced55baa ("serial: core: fix sanitizing check for RTS settings")
Cc: stable <stable@kernel.org>
Signed-off-by: Marnix Rijnart <marnix.rijnart@iwell.eu>
Link: https://patch.msgid.link/20260112000931.61703-1-marnix.rijnart@iwell.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 10904d725f6e ("serial: qcom-geni: Enable PM runtime for serial
driver") caused BT init to fail during bootup on the RB2 platform,
preventing proper BT initialization. However, BT works correctly after
bootup completes.
The issue occurs when runtime PM is enabled and uart_add_one_port() is
called before wakeup IRQ setup. The uart_add_one_port() call activates
the device through runtime PM, which configures GPIOs to the "qup_x"
pinmux function during runtime resume. When wakeup IRQ registration
happens afterward using dev_pm_set_dedicated_wake_irq(), these GPIOs
are reset back to the "gpio" pinmux function, which impacts the RX GPIO
and leads to Bluetooth failures.
Fix this by ensuring wakeup IRQ setup is completed before calling
uart_add_one_port() to prevent the pinmux function conflict.
Fixes: 10904d725f6e ("serial: qcom-geni: Enable PM runtime for serial driver")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Closes: https://lore.kernel.org/all/20251110101043.2108414-4-praveen.talari@oss.qualcomm.com/
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260108041006.1874757-1-praveen.talari@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The hp-bioscfg driver attempts to register kobjects with empty names when
the HP BIOS returns attributes with empty name strings. This causes
multiple kernel warnings:
kobject: (00000000135fb5e6): attempted to be registered with empty name!
WARNING: CPU: 14 PID: 3336 at lib/kobject.c:219 kobject_add_internal+0x2eb/0x310
Add validation in hp_init_bios_buffer_attribute() to check if the
attribute name is empty after parsing it from the WMI buffer. If empty,
log a debug message and skip registration of that attribute, allowing the
module to continue processing other valid attributes.
Cc: stable@vger.kernel.org
Fixes: a34fc329b189 ("platform/x86: hp-bioscfg: bioscfg")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260115203725.828434-2-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
termination is done
Clear rx_running flag only after DMA teardown polling completes. In the
previous implementation the flag was being cleared while hardware teardown
was still in progress, creating a mismatch between software state
(flag = 0, "ready") and hardware state (still terminating).
Signed-off-by: Moteen Shah <m-shah@ti.com>
Link: https://patch.msgid.link/20260112081829.63049-3-m-shah@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The DMA IRQ handler does not accounts for the overrun(OE) or any other
errors being reported by the IP before triggering a DMA transaction which
leads to the interrupts not being handled resulting into an IRQ storm.
The way to handle OE is to:
1. Reset the RX FIFO.
2. Read the UART_RESUME register, which clears the internal flag
Earlier, the driver issued DMA transations even in case of OE which shouldn't
be done according to the OE handling mechanism mentioned above, as we are
resetting the FIFO's, refer section: "12.1.6.4.8.1.3.6 Overrun During
Receive" [0].
[0] https://www.ti.com/lit/pdf/spruiu1
Signed-off-by: Moteen Shah <m-shah@ti.com>
Link: https://patch.msgid.link/20260112081829.63049-2-m-shah@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Having a prompt of "DMA support" suddenly appear during a
"make oldconfig" can be confusing. Add a little helpful text to
the prompt message.
Fixes: 73a19e4c0301 ("serial: sh-sci: Add DMA support.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260110232643.3533351-5-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Improve the "Non-8250 serial port support" menu so that entries in it
are displayed in a better order (_CONSOLE after its driver) and so that
intervening symbols don't break up the dependency list, allowing menu
entries to be displayed with proper indentation.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260110232643.3533351-4-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Improve the "8250/16550 serial support" menu so that entries in it
are displayed in a better order (reorder a few symbols) and so that
intervening symbols don't break up the dependency list, allowing menu
entries to be displayed with proper indentation.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260110232643.3533351-3-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
SERIAL_IMX_CONSOLE is a build option for the imx driver (SERIAL_IMX).
It does not build a separate console driver file, so it can't be built
as a module since it isn't built at all.
Change the Kconfig symbol from tristate to bool and update the help
text accordingly.
Fixes: 0db4f9b91c86 ("tty: serial: imx: enable imx serial console port as module")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260110232643.3533351-2-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 1f4ea4838b13 ("mcb: Add missing modpost build support")
the MODULE_ALIAS() is redundant as the module alias is now
automatically generated from the MODULE_DEVICE_TABLE().
Remove the explicit alias.
No functional change intended.
Reviewed-by: Jorge Sanjuan Garcia <dev-jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jose Javier Rodriguez Barbarin <dev-josejavier.rodriguez@duagon.com>
Link: https://patch.msgid.link/20260108134110.25278-3-dev-josejavier.rodriguez@duagon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 1f4ea4838b13 ("mcb: Add missing modpost build support")
the MODULE_ALIAS() is redundant as the module alias is now
automatically generated from the MODULE_DEVICE_TABLE().
Remove the explicit alias.
No functional change intended.
Reviewed-by: Jorge Sanjuan Garcia <dev-jorge.sanjuangarcia@duagon.com>
Signed-off-by: Jose Javier Rodriguez Barbarin <dev-josejavier.rodriguez@duagon.com>
Link: https://patch.msgid.link/20260108134110.25278-2-dev-josejavier.rodriguez@duagon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Split multiple assignments in a single line into separate statements in
osdep_service.c to follow kernel coding style.
No functional change.
Signed-off-by: Nayana Mariyappa <nayana.mariyappa@gmail.com>
Link: https://patch.msgid.link/20260116120511.48272-5-nayana.mariyappa@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added blank lines after variable declarations in osdep_service.c and related
files to improve readability and follow kernel coding style.
No functional change.
Signed-off-by: Nayana Mariyappa <nayana.mariyappa@gmail.com>
Link: https://patch.msgid.link/20260116120511.48272-4-nayana.mariyappa@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removed unnecessary blank lines in osdep_service.c and related files
to follow kernel coding style.
No functional change.
Signed-off-by: Nayana Mariyappa <nayana.mariyappa@gmail.com>
Link: https://patch.msgid.link/20260116120511.48272-3-nayana.mariyappa@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed multi-line block comments in osdep_service.c to follow kernel
coding style. Fixing the non-kernel-doc comment has been merged into this
patch.
No functional change.
Signed-off-by: Nayana Mariyappa <nayana.mariyappa@gmail.com>
Link: https://patch.msgid.link/20260116120511.48272-2-nayana.mariyappa@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix spacing around operators and type casts in rtw_xmit.c to
comply with the kernel coding style.
Signed-off-by: Khushal Chitturi <khushalchitturi@gmail.com>
Link: https://patch.msgid.link/20260116053052.4198-2-khushalchitturi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
cfg80211_inform_bss_frame() may return NULL on failure. In that case,
the allocated buffer 'buf' is not freed and the function returns early,
leading to potential memory leak.
Fix this by ensuring that 'buf' is freed on both success and failure paths.
Signed-off-by: Diksha Kumari <dikshakdevgan@gmail.com>
Reviewed-by: Mukesh Kumar Chaurasiya <mkchauras@linux.ibm.com>
Link: https://patch.msgid.link/20260113091712.7071-1-dikshakdevgan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Return 0 from disable_streams, use div_u64() instead of do_div(), use
dev_dbg() for a debug message and move loop variable definition into the
loop itself.
Signed-off-by: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
This patch sets the current exposure time as maximum for the
flash_duration control. As Flash/Strobes which are longer than the
exposure time have no effect.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
[Sakari Ailus: Some lines rewrapped.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
As the granularity of the hardware supported values is lower than the
control value, implement a try_ctrl() function for
V4L2_CID_FLASH_DURATION. This function calculates the nearest possible
µs strobe duration for the given value and returns it back to the
caller.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add V4L2_CID_FLASH_DURATION support using the "strobe_frame_span"
feature of the sensor. This is implemented by transforming the given µs
value by an interpolated formula to a "span step width" value and
writing it to register PWM_CTRL_25, PWM_CTRL_26, PWM_CTRL_27,
PWM_CTRL_28 (0x3925, 0x3926, 0x3927, 0x3928).
The maximum control value is set to the period of the current default
framerate.
All register values are based on the OV9281 datasheet v1.53 (jan 2019)
and tested using an ov9281 VisionComponents module.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
[Sakari Ailus: Remove redundant assignment of ret, declare ret as last.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
