| Age | Commit message (Collapse) | Author |
|---|
|
Right now, there driver supports devices with one or two metadata
formats. Prepare it to support more than two metadata formats.
This is achieved with the introduction of a new field `meta_formats`,
that contains the array of metadata formats supported by the device, in
the order expected by userspace.
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250707-uvc-meta-v8-3-ed17f8b1218b@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Currently, the driver performs a length check of the metadata buffer
before the actual metadata size is known and before the metadata is
decided to be copied. This results in valid metadata buffers being
incorrectly marked as invalid.
Move the length check to occur after the metadata size is determined and
is decided to be copied.
Cc: stable@vger.kernel.org
Fixes: 088ead255245 ("media: uvcvideo: Add a metadata device node")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250707-uvc-meta-v8-1-ed17f8b1218b@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Instead of listing the IOCTLs that do not need to turn on the camera,
list the IOCTLs that need to turn it on. This makes the code more
maintainable.
This patch changes the behaviour for unsupported IOCTLs. Those IOCTLs
will not turn on the camera.
Suggested-by: Hans Verkuil <hans@jjverkuil.nl>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Hans Verkuil <hans@hverkuil.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250701-uvc-grannular-invert-v4-7-8003b9b89f68@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
video_translate_cmd() can be useful for drivers to convert between the
VIDIOC_*32 and VIDIOC_ defines. Let's export it.
Now that the function is exported, use this opportunity to rename the
function with the v4l2_ prefix, that is less ambiguous than video_
The VIDIOC_*32 defines are not accessible by the drivers, they live in
v4l2-compat-ioctl32.c.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250701-uvc-grannular-invert-v4-6-8003b9b89f68@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
If we subscribe to an event with V4L2_EVENT_SUB_FL_SEND_INITIAL, the
driver needs to report back some values that require the camera to be
powered on. But VIDIOC_SUBSCRIBE_EVENT is not part of the ioctls that
turn on the camera.
We could unconditionally turn on the camera during
VIDIOC_SUBSCRIBE_EVENT, but it is more efficient to turn it on only
during V4L2_EVENT_SUB_FL_SEND_INITIAL, which we believe is not a common
usecase.
To avoid a list_del if uvc_pm_get() fails, we move list_add_tail to the
end of the function.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Fixes: d1b618e79548 ("media: uvcvideo: Do not turn on the camera for some ioctls")
Cc: stable@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250701-uvc-grannular-invert-v4-5-8003b9b89f68@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The is_streaming field is used by modular PM to know if the device is
currently streaming or not.
With the transition to vb2 and fop helpers, we can use vb2 functions for
the same functionality. The great benefit is that vb2 already tracks the
streaming state for us.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250616-uvc-fop-v4-4-250286570ee7@chromium.org
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
uvc_stop_streaming() is used for meta and video nodes. Split the function
in two to avoid confusion.
Use this opportunity to rename uvc_start_streaming() to
uvc_start_streaming_video(), as it is only called by the video nodes.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250616-uvc-fop-v4-3-250286570ee7@chromium.org
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Most of the calls to uvc_queue_return_buffers() wrap the call with
spin_lock_irq()/spin_unlock_irq().
Rename uvc_queue_return_buffers to __uvc_queue_return_buffers to
indicate that this is the version that does not handle locks and create
a new version of the function that handles the lock.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250616-uvc-fop-v4-2-250286570ee7@chromium.org
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
When uvc was written the vb2 ioctl and file operation helpers didn't exist.
This patch switches uvc over to those helpers, which removes a lot of
boilerplate code and allows us to drop the 'privileges' scheme, since
that's now handled inside the vb2 helpers.
This makes it possible for uvc to fix the v4l2-compliance streaming tests:
warn: v4l2-test-formats.cpp(1075): Could not set fmt2
This patch introduces a change on behavior on the uvcdriver to be
aligned with the rest of the subsystem. Now S_INPUT, S_PARM and
S_FORMAT do no grant exclusive ownership of the device.
There are other side effects, some better than others:
- Locking is now more coarse than before, the queue is locked for almost
every ioctl.
- vidioc_querybuf() can now work when the queue is busy.
Future patches should look into the locking architecture of UVC to
remove one of stream->mutex or queue->mutex.
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Co-developed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250616-uvc-fop-v4-1-250286570ee7@chromium.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking fixes from Jakub Kicinski
"Big chunk of fixes for WiFi, Johannes says probably the last for the
release.
The Netlink fixes (on top of the tree) restore operation of iw (WiFi
CLI) which uses sillily small recv buffer, and is the reason for this
'emergency PR'.
The GRE multicast fix also stands out among the user-visible
regressions.
Current release - fix to a fix:
- netlink: make sure we always allow at least one skb to be queued,
even if the recvbuf is (mis)configured to be tiny
Previous releases - regressions:
- gre: fix IPv6 multicast route creation
Previous releases - always broken:
- wifi: prevent A-MSDU attacks in mesh networks
- wifi: cfg80211: fix S1G beacon head validation and detection
- wifi: mac80211:
- always clear frame buffer to prevent stack leak in cases which
hit a WARN()
- fix monitor interface in device restart
- wifi: mwifiex: discard erroneous disassoc frames on STA interface
- wifi: mt76:
- prevent null-deref in mt7925_sta_set_decap_offload()
- add missing RCU annotations, and fix sleep in atomic
- fix decapsulation offload
- fixes for scanning
- phy: microchip: improve link establishment and reset handling
- eth: mlx5e: fix race between DIM disable and net_dim()
- bnxt_en: correct DMA unmap len for XDP_REDIRECT"
* tag 'net-6.16-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
netlink: make sure we allow at least one dump skb
netlink: Fix rmem check in netlink_broadcast_deliver().
bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT
bnxt_en: Flush FW trace before copying to the coredump
bnxt_en: Fix DCB ETS validation
net: ll_temac: Fix missing tx_pending check in ethtools_set_ringparam()
net/mlx5e: Add new prio for promiscuous mode
net/mlx5e: Fix race between DIM disable and net_dim()
net/mlx5: Reset bw_share field when changing a node's parent
can: m_can: m_can_handle_lost_msg(): downgrade msg lost in rx message to debug level
selftests: net: lib: fix shift count out of range
selftests: Add IPv6 multicast route generation tests for GRE devices.
gre: Fix IPv6 multicast route creation.
net: phy: microchip: limit 100M workaround to link-down events on LAN88xx
net: phy: microchip: Use genphy_soft_reset() to purge stale LPA bits
ibmvnic: Fix hardcoded NUM_RX_STATS/NUM_TX_STATS with dynamic sizeof
net: appletalk: Fix device refcount leak in atrtr_create()
netfilter: flowtable: account for Ethernet header in nf_flow_pppoe_proto()
wifi: mac80211: add the virtual monitor after reconfig complete
wifi: mac80211: always initialize sdata::key_list
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix performance regression when setting values of multiple GPIO lines
at once
- make sure the GPIO OF xlate code doesn't end up passing an
uninitialized local variable to GPIO core
- update MAINTAINERS
* tag 'gpio-fixes-for-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: remove bouncing address for Nandor Han
gpio: of: initialize local variable passed to the .of_xlate() callback
gpiolib: fix performance regression when using gpio_chip_get_multiple()
|
|
Helper function cxl_resource_contains_addr() can be used to check if a
resource range contains an input address. Use it to replace all code
that checks whether a resource range contains a DPA/HPA/SPA.
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20250711032357.127355-4-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Per Table 8-143. "Get Partition Info Output Payload" in CXL r3.2 section
8.2.10.9.2.1 "Get Partition Info(Opcode 4100h)", DPA 0 is a valid
address of a CXL device. However, cxl_do_ppr() considers it as an
invalid address, so that user will get an -EINVAL when user calls the
sysfs interface of the edac driver to trigger a Post Package Repair(PPR)
operation for DPA 0 on a CXL device. The correct implementation should
be checking if the input DPA is in the DPA range of the CXL device.
Fixes: be9b359e056a ("cxl/edac: Add CXL memory device soft PPR control feature")
Signed-off-by: Li Ming <ming.li@zohomail.com>
Tested-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20250711032357.127355-3-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
In CXL subsystem, many functions need to check an address availability
by checking if the resource range contains the address. Providing a new
helper function cxl_resource_contains_addr() to check if the resource
range contains the input address.
Suggested-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Li Ming <ming.li@zohomail.com>
Tested-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20250711032357.127355-2-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Currently, the ACK RSSI value is not shown in station dump. Enable WMI
resource flag for ACK RSSI in WMI INIT command to add ACK RSSI value in
management TX completion event from WMI. Update ACK RSSI value obtained
in management and data frame completion path to ieee80211_tx_info. Also
advertise NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT flag during hardware
register to mac80211 layer so that ACK RSSI is added to station dump
message.
Example output :
Station aa:bb:cc:dd:ee:ff (on wlp88s0)
inactive time: 46584 ms
rx bytes: 955
rx packets: 10
tx bytes: 769
tx packets: 6
tx retries: 81
tx failed: 0
rx drop misc: 0
signal: -39 dBm
signal avg: -40 dBm
tx bitrate: 6.0 MBit/s
tx duration: 1185 us
rx bitrate: 309.7 MBit/s 40MHz HE-MCS 6 HE-NSS 2 HE-GI 0 HE-DCM 0
rx duration: 0 us
last ack signal:-41 dBm
avg ack signal: -40 dBm
authorized: yes
authenticated: yes
.......
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sivashankari Madhavan <quic_sivamadh@quicinc.com>
Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250709133554.622463-1-quic_ssreeela@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a coding mistake in a previous fix related to system suspend and
hibernation merged recently"
* tag 'pm-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Call pm_restore_gfp_mask() after dpm_resume()
|
|
This marks 0x29 as accelerometer address on Dell Precision 3551.
I followed previous works of Paul Menzel and Hans de Goede to verify it:
$ cd /sys/bus/pci/drivers/i801_smbus/0000\:00\:1f.4
$ ls -d i2c-?
i2c-0
$ sudo modprobe i2c-dev
$ sudo i2cdetect 0
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0.
I will probe address range 0x08-0x77.
Continue? [Y/n] Y
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 08 -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- 29 -- -- -- -- -- --
30: 30 -- -- -- -- 35 UU UU -- -- -- -- -- -- -- --
40: -- -- -- -- 44 -- -- -- -- -- -- -- -- -- -- --
50: UU -- 52 -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
$ echo lis3lv02d 0x29 > sudo tee /sys/bus/i2c/devices/i2c-0/new_device
lis3lv02d 0x29
$ sudo dmesg
[ 0.000000] Linux version 6.12.28 (nixbld@localhost) (gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #1-NixOS SMP PREEMPT_DYNAMIC Fri May 9 07:50:53 UTC 2025
[...]
[ 0.000000] DMI: Dell Inc. Precision 3551/07YHW8, BIOS 1.18.0 10/03/2022
[...]
[ 3749.077624] lis3lv02d_i2c 0-0029: supply Vdd not found, using dummy regulator
[ 3749.077732] lis3lv02d_i2c 0-0029: supply Vdd_IO not found, using dummy regulator
[ 3749.098674] lis3lv02d: 8 bits 3DC sensor found
[ 3749.182480] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input28
[ 3749.182899] i2c i2c-0: new_device: Instantiated device lis3lv02d at 0x29
Signed-off-by: Jan-Niklas Burfeind <kernel@aiyionpri.me>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20250710190919.37842-1-kernel@aiyionpri.me
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add support to Alienware Area-51m and Alienware m15 R5.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250710-m15_r5-v1-1-2c6ad44e5987@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The think-lmi driver uses the firwmare_attributes_class. But this class
is registered after think-lmi, causing the "think-lmi" directory in
"/sys/class/firmware-attributes" to be missing when the driver is
compiled as builtin.
Fixes: 55922403807a ("platform/x86: think-lmi: Directly use firmware_attributes_class")
Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Link: https://lore.kernel.org/r/7dce5f7f-c348-4350-ac53-d14a8e1e8034@secunet.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Make sure to drop the OF node reference taken when creating the Gaokun
auxiliary devices when the devices are later released.
Fixes: 7636f090d02e ("platform: arm64: add Huawei Matebook E Go EC driver")
Cc: Pengyu Luo <mitltlatltl@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Pengyu Luo <mitltlatltl@gmail.com>
Link: https://lore.kernel.org/r/20250708085358.15657-1-johan@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Registering the "other mode" notifier fails if that is disabled:
x86_64-linux-ld: drivers/platform/x86/lenovo/wmi-gamezone.o: in function `lwmi_gz_probe':
wmi-gamezone.c:(.text+0x336): undefined reference to `devm_lwmi_om_register_notifier'
This could be fixed by adding a stub helper, but a Kconfig 'select'
seems simpler here.
Fixes: 22024ac5366f ("platform/x86: Add Lenovo Gamezone WMI Driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250709151734.1268435-1-arnd@kernel.org
[ij: retained the other selects as wmi-gamezone is using them directly.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
After we do the modification on the host side, ensure we write the
result back to VRAM and not the other way around, otherwise the
modification will be lost if treated like a read.
Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250710134128.800756-2-matthew.auld@intel.com
|
|
Firmware would assert on undefined bits in DSM-originated DWs.
With this change, Firmware introduces a fail-safe mechanism
and removes the assert behavior. This ensures robustness when
handling raw DSM table data.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.eee871df03c9.I2be2eaa16437e84aa1be0c6c95ec334034ce7e50@changeid
|
|
Don't WARN, which results in a useless backtrace, but just use
IWL_FW_CHECK() instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.4aedc0979beb.I3bd4d4296c7245261651603708456b7c67f55539@changeid
|
|
In the current code, if there was a rekey, we remove all the existing keys
from mac80211, then re-add the ones that the FW sent with
ieee80211_gtk_rekey_add, (newer FW will send also the existing GTKs/BIGTKs)
and then update the sequence number.
Instead of removing and re-adding the existing keys for no good reason,
we can just update the sequence of all keys, also of the ones that are
going to be replaced, and update again after the replace.
This change is required because ieee80211_gtk_rekey_add is going to be
changed to lookup the cipher from the old key instead of receiving it as an
argument, and for this it will need the old key(s), so we can't remove all
keys.
Note that with this change, in case that a key that existed before wowlan
is replaced, mac80211 will now call the driver to remove the old key and
add the new one (as opposed the previous behaviour, in which the key was
removed by the driver itself).
Of course we don't want to run the set_key callbacks in this case, so just
return early.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.f0b5e19f77f5.I958f4926f168cdad6d4d7720ebde2f5e812b297d@changeid
|
|
In the current code, if there was a rekey, we remove all the existing keys
from mac80211, then re-add the ones that the FW sent with
ieee80211_gtk_rekey_add, (newer FW will send also the existing GTKs/BIGTKs)
and then update the sequence number.
Instead of removing and re-adding the existing keys for no good reason,
we can just update the sequence of all keys, also of the ones that are
going to be replaced, and update again after the replace.
This change is required because ieee80211_gtk_rekey_add is going to be
changed to lookup the cipher from the old key instead of receiving it as an
argument, and for this it will need the old key(s), so we can't remove all
keys.
Note that with this change, in case that a key that existed before wowlan
is replaced, mac80211 will now call the driver to remove the old key and
add the new one (as opposed the previous behaviour, in which the key was
removed by the driver itself).
Of course we don't want to run the set_key callbacks in this case, so just
return early.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.10091484e38e.I45daf089189f606f3879ca4538fb46303d761710@changeid
|
|
For older APIs, gtk_seq[0].key_id will be set to -1, while other code
assumes that it will always be a valid gtk key idx.
Since the FW does provide the idx for those APIs, simply set it.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.2a5a5e4d7b19.Ib795751119070495c0c95526cd36bd7f87594f56@changeid
|
|
We use gtk[i].id, but it is not even set in older FW APIs
(iwl_wowlan_status_v6 and iwl_wowlan_status_v7).
Set it also in older FWs.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.e91e49590414.I27d2fdbed1c54aee59929fa11ec169f07e159406@changeid
|
|
The default capabilities were set to much more than the hardware
currently is intended to support, and then masked off for only
the GL MAC type. However, this was due to some miscommunication
and is incorrect, it should've been masked off for all current
and planned MACs/RFs. Instead of doing this removing and adding
of capabilities, simply list the ones that currently apply to
all devices. If this changes for a new device type we can change
the code, but at least the driver won't erroneously advertise
some capabilities that aren't actually implemented in hardware.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.69b9dac7d906.I7885499bc80453d5a84285ec927f5e89f9adfb21@changeid
|
|
Add iwl_trans_is_dead() function to be called by the op modes instead
of directly checking the trans status bits. This hides the trans
internal implementation details from callers.
Signed-off-by: Rotem Kerem <rotem.kerem@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.cd89d8013261.I214b7ffbabc393593fb57831d61d1a9ffa318a1e@changeid
|
|
add iwl_trans_device_enabled() function to be called by the op modes
instead of directly checking the trans status bits. This
hides the trans internal implementation details.
Signed-off-by: Rotem Kerem <rotem.kerem@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.bb957ba9e130.I6ab825caf41308fb0f7aa1c266f50457fd0c496e@changeid
|
|
Add iwl_trans_suppress_cmd_error_once() function to be called by the op
modes instead of directly checking the trans status bits.
This hides the trans internal implementation details from callers.
Signed-off-by: Rotem Kerem <rotem.kerem@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.e061ae241fd3.Ie2043c4e237196ebcfe195006d3d76371de48a55@changeid
|
|
Later RFs will always do puncturing, regardless of BIOS
configuration, and earlier RFs aren't supported in MLD.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.6fa9c44964c1.I46a4cd744a769ec2ac3c8f9a04882140449394b8@changeid
|
|
We don't have puncturing before EHT, and EHT devices aren't
supported in iwlmvm, so remove the regulatory puncturing
setup code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.b2a28a99725b.I72ba276cb705c02cea8f68e27ef3935d5120cfee@changeid
|
|
The last version for the range response notification is 10.
Update the expected version accordingly.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.377d24e29ac6.I44119a4e793bba35b46e1d35e2c378ce6f901bfd@changeid
|
|
When a GO is started, the P2P device mac is updated to indicate
that frames for the P2P device mac should be filtered in while
the GO is active. However, this configuration is done after the GO is
already started so it doesn't take effect. Fix it by updating the
P2P device mac before adding the broadcast station, which actually
starts the GO.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.463a0ad545f9.I85a25484d787b65f6a27e794285911e319df0b2d@changeid
|
|
The scan request validation function uses bitwise and instead
of logical and. Fix it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250710212632.ec7d665f56a4.I416816b491fafa5d3efdf0a4be78356eedf2bd95@changeid
|
|
When -Wformat-security is enabled, this new code triggers it:
drivers/platform/x86/intel/pmt/discovery.c: In function 'pmt_features_discovery':
drivers/platform/x86/intel/pmt/discovery.c:505:36: error: format not a string literal and no format arguments [-Werror=format-security]
505 | pmt_feature_names[feature->id]);
Fixes: d9a078809356 ("platform/x86/intel/pmt: Add PMT Discovery driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250711072718.2748415-1-arnd@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add support to enable Memory Controller (MC) and External Memory
Controller (EMC) drivers for Tegra264. The nodes for MC and EMC are
mostly the same as Tegra234 but differ in number of channels and
interrupt numbers.
The patch also adds the bandwidth manager definitions required for
Tegra264 and uses them to populate the memory client table. All of
these are needed to properly enable memory interconnect (ICC) support.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250709222147.3758356-3-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Currently, packets are being received into the WBM error ring when
REO queue lookup is enabled, resulting in degraded RX performance.
The issue arises because the REO queue LUT TID memory reference is
set to zero-it's being assigned before the memory is allocated.
Fix this by assigning the REO queue TID memory reference in the LUT
immediately after memory allocation to ensure correct packet
processing.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Reported-by: Tanguy Serrat <tanguy@squaremind.io>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220282
Fixes: 3b9cbce6fdd3 ("wifi: ath12k: alloc REO queue per station")
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250710011754.559817-1-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set()
with the proper length instead of 0. This bug triggers this warning
on a system with IOMMU enabled:
WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170
RIP: 0010:__iommu_dma_unmap+0x159/0x170
Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45
b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00
RSP: 0018:ff22d31181150c88 EFLAGS: 00010206
RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000
R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000
R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00
FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0
PKRU: 55555554
Call Trace:
<IRQ>
? show_regs+0x6d/0x80
? __warn+0x89/0x160
? __iommu_dma_unmap+0x159/0x170
? report_bug+0x17e/0x1b0
? handle_bug+0x46/0x90
? exc_invalid_op+0x18/0x80
? asm_exc_invalid_op+0x1b/0x20
? __iommu_dma_unmap+0x159/0x170
? __iommu_dma_unmap+0xb3/0x170
iommu_dma_unmap_page+0x4f/0x100
dma_unmap_page_attrs+0x52/0x220
? srso_alias_return_thunk+0x5/0xfbef5
? xdp_return_frame+0x2e/0xd0
bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en]
__bnxt_poll_work_done+0x81/0x1e0 [bnxt_en]
bnxt_poll+0xd3/0x1e0 [bnxt_en]
Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250710213938.1959625-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_fill_drv_seg_record() calls bnxt_dbg_hwrm_log_buffer_flush()
to flush the FW trace buffer. This needs to be done before we
call bnxt_copy_ctx_mem() to copy the trace data.
Without this fix, the coredump may not contain all the FW
traces.
Fixes: 3c2179e66355 ("bnxt_en: Add FW trace coredump segments to the coredump")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250710213938.1959625-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In bnxt_ets_validate(), the code incorrectly loops over all possible
traffic classes to check and add the ETS settings. Fix it to loop
over the configured traffic classes only.
The unconfigured traffic classes will default to TSA_ETS with 0
bandwidth. Looping over these unconfigured traffic classes may
cause the validation to fail and trigger this error message:
"rejecting ETS config starving a TC\n"
The .ieee_setets() will then fail.
Fixes: 7df4ae9fe855 ("bnxt_en: Implement DCBNL to support host-based DCBX.")
Reviewed-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250710213938.1959625-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function ll_temac_ethtools_set_ringparam() incorrectly checked
rx_pending twice, once correctly for RX and once mistakenly in place
of tx_pending. This caused tx_pending to be left unchecked against
TX_BD_NUM_MAX.
As a result, invalid TX ring sizes may have been accepted or valid
ones wrongly rejected based on the RX limit, leading to potential
misconfiguration or unexpected results.
This patch corrects the condition to properly validate tx_pending.
Fixes: f7b261bfc35e ("net: ll_temac: Make RX/TX ring sizes configurable")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250710180621.2383000-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
An optimization for promiscuous mode adds a high-priority steering
table with a single catch-all rule to steer all traffic directly to
the TTC table.
However, a gap exists between the creation of this table and the
insertion of the catch-all rule. Packets arriving in this brief window
would miss as no rule was inserted yet, unnecessarily incrementing the
'rx_steer_missed_packets' counter and dropped.
This patch resolves the issue by introducing a new prio for this
table, placing it between MLX5E_TC_PRIO and MLX5E_NIC_PRIO. By doing
so, packets arriving during the window now fall through to the next
prio (at MLX5E_NIC_PRIO) instead of being dropped.
Fixes: 1c46d7409f30 ("net/mlx5e: Optimize promiscuous mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1752155624-24095-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There's a race between disabling DIM and NAPI callbacks using the dim
pointer on the RQ or SQ.
If NAPI checks the DIM state bit and sees it still set, it assumes
`rq->dim` or `sq->dim` is valid. But if DIM gets disabled right after
that check, the pointer might already be set to NULL, leading to a NULL
pointer dereference in net_dim().
Fix this by calling `synchronize_net()` before freeing the DIM context.
This ensures all in-progress NAPI callbacks are finished before the
pointer is cleared.
Kernel log:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:net_dim+0x23/0x190
...
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x150/0x3e0
? common_interrupt+0xf/0xa0
? sysvec_call_function_single+0xb/0x90
? exc_page_fault+0x74/0x130
? asm_exc_page_fault+0x22/0x30
? net_dim+0x23/0x190
? mlx5e_poll_ico_cq+0x41/0x6f0 [mlx5_core]
? sysvec_apic_timer_interrupt+0xb/0x90
mlx5e_handle_rx_dim+0x92/0xd0 [mlx5_core]
mlx5e_napi_poll+0x2cd/0xac0 [mlx5_core]
? mlx5e_poll_ico_cq+0xe5/0x6f0 [mlx5_core]
busy_poll_stop+0xa2/0x200
? mlx5e_napi_poll+0x1d9/0xac0 [mlx5_core]
? mlx5e_trigger_irq+0x130/0x130 [mlx5_core]
__napi_busy_loop+0x345/0x3b0
? sysvec_call_function_single+0xb/0x90
? asm_sysvec_call_function_single+0x16/0x20
? sysvec_apic_timer_interrupt+0xb/0x90
? pcpu_free_area+0x1e4/0x2e0
napi_busy_loop+0x11/0x20
xsk_recvmsg+0x10c/0x130
sock_recvmsg+0x44/0x70
__sys_recvfrom+0xbc/0x130
? __schedule+0x398/0x890
__x64_sys_recvfrom+0x20/0x30
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
...
---[ end trace 0000000000000000 ]---
...
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Fixes: 445a25f6e1a2 ("net/mlx5e: Support updating coalescing configuration without resetting channels")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1752155624-24095-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When changing a node's parent, its scheduling element is destroyed and
re-created with bw_share 0. However, the node's bw_share field was not
updated accordingly.
Set the node's bw_share to 0 after re-creation to keep the software
state in sync with the firmware configuration.
Fixes: 9c7bbf4c3304 ("net/mlx5: Add support for setting parent of nodes")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/1752155624-24095-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some simple tests for IOMMUFD_CMD_HW_QUEUE_ALLOC infrastructure covering
the new iommufd_hw_queue_depend/undepend() helpers.
Link: https://patch.msgid.link/r/e8a194d187d7ef445f43e4a3c04fb39472050afd.1752126748.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
NVIDIA Virtual Command Queue is one of the iommufd users exposing vIOMMU
features to user space VMs. Its hardware has a strict rule when mapping
and unmapping multiple global CMDQVs to/from a VM-owned VINTF, requiring
mappings in ascending order and unmappings in descending order.
The tegra241-cmdqv driver can apply the rule for a mapping in the LVCMDQ
allocation handler. However, it can't do the same for an unmapping since
user space could start random destroy calls breaking the rule, while the
destroy op in the driver level can't reject a destroy call as it returns
void.
Add iommufd_hw_queue_depend/undepend for-driver helpers, allowing LVCMDQ
allocator to refcount_inc() a sibling LVCMDQ object and LVCMDQ destroyer
to refcount_dec(), so that iommufd core will help block a random destroy
call that breaks the rule.
This is a bit of compromise, because a driver might end up with abusing
the API that deadlocks the objects. So restrict the API to a dependency
between two driver-allocated objects of the same type, as iommufd would
unlikely build any core-level dependency in this case. And encourage to
use the macro version that currently supports the HW QUEUE objects only.
Link: https://patch.msgid.link/r/2735c32e759c82f2e6c87cb32134eaf09b7589b5.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Introduce a new IOMMUFD_CMD_HW_QUEUE_ALLOC ioctl for user space to allocate
a HW QUEUE object for a vIOMMU specific HW-accelerated queue, e.g.:
- NVIDIA's Virtual Command Queue
- AMD vIOMMU's Command Buffer, Event Log Buffers, and PPR Log Buffers
Since this is introduced with NVIDIA's VCMDQs that access the guest memory
in the physical address space, add an iommufd_hw_queue_alloc_phys() helper
that will create an access object to the queue memory in the IOAS, to avoid
the mappings of the guest memory from being unmapped, during the life cycle
of the HW queue object.
AMD's HW will need an hw_queue_init op that is mutually exclusive with the
hw_queue_init_phys op, and their case will bypass the access part, i.e. no
iommufd_hw_queue_alloc_phys() call.
Link: https://patch.msgid.link/r/dab4ace747deb46c1fe70a5c663307f46990ae56.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
