| Age | Commit message (Collapse) | Author |
|---|
|
Replace the manual pci_ioremap_wc() call for mapping screen memory with the
device-managed devm_ioremap_wc() variant.
This simplifies the driver's resource management by ensuring the memory is
automatically unmapped when the driver detaches from the device.
Signed-off-by: Giovanni Di Santi <giovanni.disanti.lkl@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Replace the manual ioremap() call for the MMIO registers with the
device-managed devm_ioremap() variant.
This simplifies the driver's resource management by ensuring the memory is
automatically unmapped when the driver detaches from the device.
Signed-off-by: Giovanni Di Santi <giovanni.disanti.lkl@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The kyro framebuffer driver did not request its PCI memory regions,
which could lead to conflicts with other drivers. This change
addresses the task "Request memory regions in all fbdev drivers"
from the file Documentation/gpu/todo.rst.
This is addressed by using the managed device functions pcim_enable_device()
and pcim_request_all_regions(). This simplifies the code by making error
handling and driver removal cleanup automatic for these resources.
Signed-off-by: Giovanni Di Santi <giovanni.disanti.lkl@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
The error handling is a bit different. "memory-region" is optional, so
failed lookup is not an error. But then an error in
of_address_to_resource() is treated as an error. However, that
distinction is not really important. Either the region is available
and usable or it is not. So now, it is just
of_reserved_mem_region_to_resource() which is checked for an error.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The current implementation may lead to buffer overflow when:
1. Unregistration creates NULL gaps in registered_fb[]
2. All array slots become occupied despite num_registered_fb < FB_MAX
3. The registration loop exceeds array bounds
Add boundary check to prevent registered_fb[FB_MAX] access.
Signed-off-by: Yongzhen Zhang <zhangyongzhen@kylinos.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The nvidiafb driver uses inb()/outb() without depending on HAS_IOPORT,
which leads to build errors since kernel v6.13-rc1:
commit 6f043e757445 ("asm-generic/io.h: Remove I/O port accessors
for HAS_IOPORT=n")
Add the HAS_IOPORT dependency to prevent the build errors.
(Found in ARCH=um allmodconfig builds)
drivers/video/fbdev/nvidia/nv_accel.c: In function ‘NVDmaWait’:
include/asm-generic/io.h:596:15: error: call to ‘_outb’ declared with attribute error: outb() requires CONFIG_HAS_IOPORT
596 | #define _outb _outb
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Now that ARCH=um no longer has IO port accesses, this driver
can no longer build as-is. Make the IO port calls not just
conditional on i386 but also !UML.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Use min() to simplify ocs_create_linked_list_from_sg() and improve its
readability.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Perform DMA unmapping operations before processing data.
Otherwise, there may be unsynchronized data accessed by
the CPU when the SWIOTLB is enabled.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The function adf_dev_autoreset() is only used within adf_aer.c and does
not need to be exposed outside the compilation unit. Make it static and
remove it from the header adf_common_drv.h.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
A number of functions in this file have large structures on the stack,
ccp_run_aes_gcm_cmd() being the worst, in particular when KASAN
is enabled on gcc:
drivers/crypto/ccp/ccp-ops.c: In function 'ccp_run_sha_cmd':
drivers/crypto/ccp/ccp-ops.c:1833:1: error: the frame size of 1136 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
drivers/crypto/ccp/ccp-ops.c: In function 'ccp_run_aes_gcm_cmd':
drivers/crypto/ccp/ccp-ops.c:914:1: error: the frame size of 1632 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Avoid the issue by using dynamic memory allocation in the worst one
of these.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Refactor the functions `adf_ring_start()` and `adf_ring_next()` to
improve readability.
This does not introduce any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The `adf_ring_next()` function in the QAT debug transport interface
fails to correctly update the position index when reaching the end of
the ring elements. This triggers the following kernel warning when
reading ring files, such as
/sys/kernel/debug/qat_c6xx_<D:B:D:F>/transport/bank_00/ring_00:
[27725.022965] seq_file: buggy .next function adf_ring_next [intel_qat] did not update position index
Ensure that the `*pos` index is incremented before returning NULL when
after the last element in the ring is found, satisfying the seq_file API
requirements and preventing the warning.
Fixes: a672a9dc872e ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
QAT devices perform an additional integrity check during compression by
decompressing the output. Starting from QAT GEN4, this verification is
done in-line by the hardware. However, on GEN2 devices, the hardware
reads back the compressed output from the destination buffer and performs
a decompression operation using it as the source.
In the current QAT driver, destination buffers are always marked as
write-only. This is incorrect for QAT GEN2 compression, where the buffer
is also read during verification. Since commit 6f5dc7658094
("iommu/vt-d: Restore WO permissions on second-level paging entries"),
merged in v6.16-rc1, write-only permissions are strictly enforced, leading
to DMAR errors when using QAT GEN2 devices for compression, if VT-d is
enabled.
Mark the destination buffers as DMA_BIDIRECTIONAL. This ensures
compatibility with GEN2 devices, even though it is not required for
QAT GEN4 and later.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Fixes: cf5bb835b7c8 ("crypto: qat - fix DMA transfer direction")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use touch-overlay to support overlay objects such as buttons and a
resized frame defined in the device tree.
A key event will be generated if the coordinates of a touch event are
within the area defined by the button properties.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/20241016-feature-ts_virtobj_patch-v11-4-b292a1bbb0a1@wolfvision.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Some touch devices provide mechanical overlays with different objects
like buttons or clipped touchscreen surfaces.
In order to support these objects, add a series of helper functions
to the input subsystem to transform them into overlay objects via
device tree nodes.
These overlay objects consume the raw touch events and report the
expected input events depending on the object properties.
Note that the current implementation allows for multiple definitions
of touchscreen areas (regions that report touch events), but only the
first one will be used for the touchscreen device that the consumers
typically provide.
Should the need for multiple touchscreen areas arise, additional
touchscreen devices would be required at the consumer side.
There is no limitation in the number of touch areas defined as buttons.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/20241016-feature-ts_virtobj_patch-v11-2-b292a1bbb0a1@wolfvision.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Currently only F23 is correctly mapped for PS/2 keyboards.
According to this table:
https://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/translate.pdf
- F24 and Zenkaku/Hankaku share the same scancode, but since in real world
Zenkaku/Hankaku keys seem to just use the tilde scancode, this patch binds the
scancode to F24. Note that on userspace side the KEY_ZENKAKUHANKAKU keycode is
currently not bound in xkeyboard-config, so it is (mostly*) unused anyway.
* Qt on Wayland and therefore KDE on Wayland can see the keypress anyway for
some reason and it is actually used in a touchpad toggle shortcut, but this is
currently being fixed in both KDE and xkeyboard-config to make this less weird,
so it could directly be fixed to correctly handle the F24 keypress instead.
- The scancodes for F13-F22 are currently unmapped so there will probably be no
harm in mapping them. This would also fix the issue that some of these keys
can't be mapped as the target from userspace using the `setkeycodes` command.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250722120438.28011-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Map paddles to the newly defined BTN_GRIP* buttons.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250702040102.125432-3-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Many controllers these days have started including grip buttons. As
there has been no particular assigned BTN_* constants for these, they've
been haphazardly assigned to BTN_TRIGGER_HAPPY*. Unfortunately, the
assignment of these has varied significantly between drivers.
Add and document new constants for these grip buttons.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250702040102.125432-2-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Since dance pads can have both up/down or left/right pressed at the same time,
by design, they are not suitable for mapping the buttons to axes. Historically,
this driver mapped the D-pad to BTN_TRIGGER_HAPPY1-4 in these cases, and before
that as mouse buttons. However, BTN_DPAD_* exists for this and makes far more
sense than the arbitrary mapping it was before.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250702034740.124817-1-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
RMI4 F1A implements capacitive keys. Add support for touch keys found in
some Synaptics touch controller configurations.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20250707-rmi4_f1a-v1-2-838d83c72e7f@apitzsch.eu
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
A few drivers that use the legacy GPIOLIB interfaces can be enabled
even when GPIOLIB is disabled entirely. With my previous patch this
now causes build failures like:
drivers/nfc/s3fwrn5/uart.c: In function 's3fwrn82_uart_parse_dt':
drivers/nfc/s3fwrn5/uart.c:100:14: error: implicit declaration of function 'gpio_is_valid'; did you mean 'uuid_is_valid'? [-Werror=implicit-function-declaration]
These did not show up in my randconfig tests because randconfig almost
always has GPIOLIB selected by some other driver, and I did most
of the testing with follow-up patches that address the failures
properly.
Move the symbol outside of the 'if CONFIG_GPIOLIB' block for the moment
to avoid the build failures. It can be moved back and turned off by
default once all the driver specific changes are merged.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507261934.yIHeUuEQ-lkp@intel.com/
Fixes: 678bae2eaa81 ("gpiolib: make legacy interfaces optional")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250726211053.2226857-1-arnd@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Forcepad devices do not have physical buttons underneath the surface and
use F21 to report "clicks" based on touch pressure.
Signed-off-by: Marge Yang <Marge.Yang@tw.synaptics.com>
Link: https://lore.kernel.org/r/20250716033648.1785509-1-marge.yang@tw.synaptics.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Fix the `clk_round_rate` implementation for Versal platforms by calling
the Versal-specific divider calculation helper. The existing code used
the generic divider routine, which results in incorrect round rate.
Fixes: 7681f64e6404 ("clk: clocking-wizard: calculate dividers fractional parts")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20250625054114.28273-1-shubhrajyoti.datta@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Fix typos, mostly in comments except CLKGATE_SEPERATED_* (definition and
uses updated).
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20250723203819.2910289-1-helgaas@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Fix possible warning:
>> drivers/rtc/rtc-pcf85063.c:566:37: warning: unused variable 'config_rv8063' [-Wunused-const-variable]
566 | static const struct pcf85063_config config_rv8063 = {
| ^~~~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507241607.dmz2qrO5-lkp@intel.com/
Link: https://lore.kernel.org/r/20250724090420.917705-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One last fix for v6.16, removing some hard coding to avoid data
corruption on some NAND devices in the QPIC driver"
* tag 'spi-fix-v6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-qpic-snand: don't hardcode ECC steps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- qup: avoid potential hang when waiting for bus idle
- tegra: improve ACPI reset error handling
- virtio: use interruptible wait to prevent hang during transfer
* tag 'i2c-for-6.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: qup: jump out of the loop in case of timeout
i2c: virtio: Avoid hang by using interruptible completion wait
i2c: tegra: Fix reset error handling with ACPI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few Allwinner clk driver fixes:
- Mark Allwinner A523 MBUS clock as critical to avoid
system stalls
- Fix names of CSI related clocks on Allwinner V3s. This
includes changes to the driver, DT bindings and DT files.
- Fix parents of TCON clock on Allwinner V3s"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: v3s: Fix TCON clock parents
clk: sunxi-ng: v3s: Fix CSI1 MCLK clock name
clk: sunxi-ng: v3s: Fix CSI SCLK clock name
clk: sunxi-ng: a523: Mark MBUS clock as critical
|
|
If CONFIG_ZL3073X is enabled but both CONFIG_ZL3073X_I2C and
CONFIG_ZL3073X_SPI are disabled, the compilation may fail because
CONFIG_REGMAP is not enabled.
Fix the issue by selecting CONFIG_REGMAP when CONFIG_ZL3073X is enabled.
Fixes: 2df8e64e01c10 ("dpll: Add basic Microchip ZL3073x support")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20250726184145.25769-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge in late fixes to prepare for the 6.17 net-next PR.
Conflicts:
net/core/neighbour.c
1bbb76a89948 ("neighbour: Fix null-ptr-deref in neigh_flush_dev().")
13a936bb99fb ("neighbour: Protect tbl->phash_buckets[] with a dedicated mutex.")
03dc03fa0432 ("neighbor: Add NTF_EXT_VALIDATED flag for externally validated entries")
Adjacent changes:
drivers/net/usb/usbnet.c
0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event")
2c04d279e857 ("net: usb: Convert tasklet API to new bottom half workqueue mechanism")
net/ipv6/route.c
31d7d67ba127 ("ipv6: annotate data-races around rt->fib6_nsiblings")
1caf27297215 ("ipv6: adopt dst_dev() helper")
3b3ccf9ed05e ("net: Remove unnecessary NULL check for lwtunnel_fill_encap()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit ff3fbcdd4724 ("selftests: tc: Add generic erspan_opts matching support
for tc-flower") started triggering the following kmemleak warning:
unreferenced object 0xffff888015fb0e00 (size 512):
comm "softirq", pid 0, jiffies 4294679065
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 40 d2 85 9e ff ff ff ff ........@.......
41 69 59 9d ff ff ff ff 00 00 00 00 00 00 00 00 AiY.............
backtrace (crc 30b71e8b):
__kmalloc_noprof+0x359/0x460
metadata_dst_alloc+0x28/0x490
erspan_rcv+0x4f1/0x1160 [ip_gre]
gre_rcv+0x217/0x240 [ip_gre]
gre_rcv+0x1b8/0x400 [gre]
ip_protocol_deliver_rcu+0x31d/0x3a0
ip_local_deliver_finish+0x37d/0x620
ip_local_deliver+0x174/0x460
ip_rcv+0x52b/0x6b0
__netif_receive_skb_one_core+0x149/0x1a0
process_backlog+0x3c8/0x1390
__napi_poll.constprop.0+0xa1/0x390
net_rx_action+0x59b/0xe00
handle_softirqs+0x22b/0x630
do_softirq+0xb1/0xf0
__local_bh_enable_ip+0x115/0x150
vrf_ip6_input_dst unconditionally sets skb dst entry, add a call to
skb_dst_drop to drop any existing entry.
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Fixes: 9ff74384600a ("net: vrf: Handle ipv6 multicast and link-local addresses")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250725160043.350725-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Silence deferred probes using dev_err_probe(). This can happen when
the ethernet PHY uses an IRQ line attached to a i2c GPIO expander. If the
i2c bus is not yet ready, a probe deferral can occur.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250725055615.259945-1-alexander.stein@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no break time in the while() loop, so every time at the end of
igb_xmit_zc(), negative overflow of nb_pkts will occur, which renders
the return value always false. But theoretically, the result should be
set after calling xsk_tx_peek_release_desc_batch(). We can take
i40e_xmit_zc() as a good example.
Returning false means we're not done with transmission and we need one
more poll, which is exactly what igb_xmit_zc() always did before this
patch. After this patch, the return value depends on the nb_pkts value.
Two cases might happen then:
1. if (nb_pkts < budget), it means we process all the possible data, so
return true and no more necessary poll will be triggered because of
this.
2. if (nb_pkts == budget), it means we might have more data, so return
false to let another poll run again.
Fixes: f8e284a02afc ("igb: Add AF_XDP zero-copy Tx support")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20250723142327.85187-3-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A negative overflow can happen when the budget number of descs are
consumed. as long as the budget is decreased to zero, it will again go
into while (budget-- > 0) statement and get decreased by one, so the
overflow issue can happen. It will lead to returning true whereas the
expected value should be false.
In this case where all the budget is used up, it means zc function
should return false to let the poll run again because normally we
might have more data to process. Without this patch, zc function would
return true instead.
Fixes: 132c32ee5bc0 ("net: stmmac: Add TX via XDP zero-copy socket")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20250723142327.85187-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PCIe specification allows three attention indicator states, on, off,
and blink. Enable all three states instead of basic on / off control.
This changes the userspace API (writes to the sysfs "attention" file) to
match the behavior of pciehp. Here's the comparison of previous and new
indicator behavior:
Value Previous New Behavior
----- -------- ------------------------
0 off (reserved, so undefined)
1 on on
2 on blink
3 on off
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: add specifics of behavior change]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/1210309411.1359866.1752615582001.JavaMail.zimbra@raptorengineeringinc.com
|
|
The existing PowerNV hotplug code did not handle surprise plug events
correctly, leading to a complete failure of the hotplug system after device
removal and a required reboot to detect new devices.
This comes down to two issues:
1) When a device is surprise removed, often the bridge upstream
port will cause a PE freeze on the PHB. If this freeze is not
cleared, the MSI interrupts from the bridge hotplug notification
logic will not be received by the kernel, stalling all plug events
on all slots associated with the PE.
2) When a device is removed from a slot, regardless of surprise or
programmatic removal, the associated PHB/PE ls left frozen.
If this freeze is not cleared via a fundamental reset, skiboot
is unable to clear the freeze and cannot retrain / rescan the
slot. This also requires a reboot to clear the freeze and redetect
the device in the slot.
Issue the appropriate unfreeze and rescan commands on hotplug events,
and don't oops on hotplug if pci_bus_to_OF_node() returns NULL.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: tidy comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/171044224.1359864.1752615546988.JavaMail.zimbra@raptorengineeringinc.com
|
|
The Microsemi Switchtec PM8533 PFX 48xG3 [11f8:8533] PCIe switch system
was observed to incorrectly assert the Presence Detect Set bit in its
capabilities when tested on a Raptor Computing Systems Blackbird system,
resulting in the hot insert path never attempting a rescan of the bus
and any downstream devices not being re-detected.
Work around this by additionally checking whether the PCIe data link is
active or not when performing presence detection on downstream switches'
ports, similar to the pciehp_hpc.c driver.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/505981576.1359853.1752615415117.JavaMail.zimbra@raptorengineeringinc.com
|
|
When the root of a nested PCIe bridge configuration is unplugged, the
pnv_php driver leaked the allocated IRQ resources for the child bridges'
hotplug event notifications, resulting in a panic.
Fix this by walking all child buses and deallocating all its IRQ resources
before calling pci_hp_remove_devices().
Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so
that it is only destroyed in pnv_php_free_slot(), instead of
pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will
now be called by workers triggered by hot unplug interrupts, so the
workqueue needs to stay allocated.
The abridged kernel panic that occurs without this patch is as follows:
WARNING: CPU: 0 PID: 687 at kernel/irq/msi.c:292 msi_device_data_release+0x6c/0x9c
CPU: 0 UID: 0 PID: 687 Comm: bash Not tainted 6.14.0-rc5+ #2
Call Trace:
msi_device_data_release+0x34/0x9c (unreliable)
release_nodes+0x64/0x13c
devres_release_all+0xc0/0x140
device_del+0x2d4/0x46c
pci_destroy_dev+0x5c/0x194
pci_hp_remove_devices+0x90/0x128
pci_hp_remove_devices+0x44/0x128
pnv_php_disable_slot+0x54/0xd4
power_write_file+0xf8/0x18c
pci_slot_attr_store+0x40/0x5c
sysfs_kf_write+0x64/0x78
kernfs_fop_write_iter+0x1b0/0x290
vfs_write+0x3bc/0x50c
ksys_write+0x84/0x140
system_call_exception+0x124/0x230
system_call_vectored_common+0x15c/0x2ec
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: tidy comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/2013845045.1359852.1752615367790.JavaMail.zimbra@raptorengineeringinc.com
|
|
The PTP function of KSZ8463 is on by default. However, its proprietary
way of storing timestamp directly in a reserved field inside the PTP
message header is not suitable for use with the current Linux PTP stack
implementation. It is necessary to disable the PTP function to not
interfere the normal operation of the MAC.
Note the PTP driver for KSZ switches does not work for KSZ8463 and is not
activated for it.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-7-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The fiber ports in KSZ8463 cannot be detected internally, so it requires
specifying that condition in the device tree. Like the one used in
Micrel PHY the port link can only be read and there is no write to the
PHY. The driver programs registers to operate fiber ports correctly.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-6-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ8463 uses 16-bit register definitions so it writes differently for
8-bit switch MAC address.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-5-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ8463 does not use same set of registers as KSZ8863 so it is necessary
to change some registers when using KSZ8463.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-4-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ8463 switch is a 3-port switch based from KSZ8863. Its major
difference from other KSZ SPI switches is its register access is not a
simple continual 8-bit transfer with automatic address increase but uses
a byte-enable mechanism specifying 8-bit, 16-bit, or 32-bit access. Its
registers are also defined in 16-bit format because it shares a design
with a MAC controller using 16-bit access. As a result some common
register accesses need to be re-arranged.
This patch adds the basic structure for using KSZ8463. It cannot use the
same regmap table for other KSZ switches as it interprets the 16-bit
value as little-endian and its SPI commands are different.
KSZ8463 uses a byte-enable mechanism to specify 8-bit, 16-bit, and 32-bit
access. The register is first shifted right by 2 then left by 4. Extra
4 bits are added. If the access is 8-bit one of the 4 bits is set. If
the access is 16-bit two of the 4 bits are set. If the access is 32-bit
all 4 bits are set. The SPI command for read or write is then added.
Because of this register transformation separate SPI read and write
functions are provided for KSZ8463.
KSZ8463's internal PHYs use standard PHY register definitions so there is
no need to remap things. However, the hardware has a bug that the high
word and low word of the PHY id are swapped. In addition the port
registers are arranged differently so KSZ8463 has its own mapping for
port registers and PHY registers. Therefore the PORT_CTRL_ADDR macro is
replaced with the get_port_addr helper function.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-3-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for Agilex5 compatible value.
Signed-off-by: Mun Yew Tham <mun.yew.tham@altera.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/20250724154052.205706-5-matthew.gerlach@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-07-25
The patch is by Stephane Grosjean and adds support the recent firmware
of USB CAN FD interfaces to the peak_usb driver.
* tag 'linux-can-fixes-for-6.16-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: peak_usb: fix USB FD devices potential malfunction
====================
Link: https://patch.msgid.link/20250725101619.4095105-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-07-25
The first patch is by Khaled Elnaggar and converts the janz-ican3
driver's fwinfo_show() to sysfs_emit().
Vincent Mailhol contributes 3 patches that first fix a warning in the
ti_hecc driver and then add missing COMPILE_TEST more compile
coverage to the ti_hecc and tscan1 driver.
Randy Dunlap's patch let's the tscan1 driver depend on PC104.
A patch by Luis Felipe Hernandez fixes a kernel-doc error in the
ctucanfd driver.
Jimmy Assarsson contributes 10 patches for the kvaser_pciefd and 11
for the kvaser_usb driver. Both series simplify the identification of
physical the CAN interfaces and add devlink support to get information
about the running firmware.
* tag 'linux-can-next-for-6.17-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (27 commits)
Documentation: devlink: add devlink documentation for the kvaser_usb driver
can: kvaser_usb: Add devlink port support
can: kvaser_usb: Expose device information via devlink info_get()
can: kvaser_usb: Add devlink support
can: kvaser_usb: Store additional device information
can: kvaser_usb: Store the different firmware version components in a struct
can: kvaser_usb: Move comment regarding max_tx_urbs
can: kvaser_usb: Add intermediate variables
can: kvaser_usb: Assign netdev.dev_port based on device channel index
can: kvaser_usb: Add support for ethtool set_phys_id()
can: kvaser_usb: Add support to control CAN LEDs on device
Documentation: devlink: add devlink documentation for the kvaser_pciefd driver
can: kvaser_pciefd: Add devlink port support
can: kvaser_pciefd: Expose device firmware version via devlink info_get()
can: kvaser_pciefd: Add devlink support
can: kvaser_pciefd: Split driver into C-file and header-file.
can: kvaser_pciefd: Store device channel index
can: kvaser_pciefd: Store the different firmware version components in a struct
can: kvaser_pciefd: Add intermediate variable for device struct in probe()
can: kvaser_pciefd: Add support for ethtool set_phys_id()
...
====================
Link: https://patch.msgid.link/20250725161327.4165174-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
libie: commonize adminq structure
Michal Swiatkowski says:
It is a prework to allow reusing some specific Intel code (eq. fwlog).
Move common *_aq_desc structure to libie header and changing
it in ice, ixgbe, i40e and iavf.
Only generic adminq commands can be easily moved to common header, as
rest is slightly different. Format remains the same. It will be better
to correctly move it when it will be needed to commonize other part of
the code.
Move *_aq_str() to new libie module (libie_adminq) and use it across
drivers. The functions are exactly the same in each driver. Some more
adminq helpers/functions can be moved to libie_adminq when needed.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
i40e: use libie_aq_str
iavf: use libie_aq_str
ice: use libie_aq_str
libie: add adminq helper for converting err to str
iavf: use libie adminq descriptors
i40e: use libie adminq descriptors
ixgbe: use libie adminq descriptors
ice, libie: move generic adminq descriptors to lib
====================
Link: https://patch.msgid.link/20250724182826.3758850-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As part of the removal of the variably-sized sockaddr for kernel
internals, replace struct sockaddr with sockaddr_inet in the endpoint
union.
No binary changes; the union size remains unchanged due to sockaddr_inet
matching the size of sockaddr_in6.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250722171836.1078436-2-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Underneath "TIS Config" tag expose TIS diagnostic information.
Expose the tisn of each TC under each lag port.
$ sudo devlink health diagnose auxiliary/mlx5_core.eth.2/131072 reporter tx
......
TIS Config:
lag port: 0 tc: 0 tisn: 0
lag port: 1 tc: 0 tisn: 8
......
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1753194228-333722-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
