| Age | Commit message (Collapse) | Author |
|---|
|
Initialization is not needed as memory is already set to 0 by devm_kzalloc.
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250804170916.3212221-3-christian.bruel@foss.st.com
|
|
The pci_endpoint_test tests the 32-bit MSI range. However, the device might
not have all vectors configured. For example, if msi_interrupts is 8 in the
ep function space or if the MSI Multiple Message Capable value is
configured as 4 (maximum 16 vectors).
In this case, do not attempt to run the test to avoid timeouts and directly
return the error value.
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250804170916.3212221-2-christian.bruel@foss.st.com
|
|
DRM_ERROR and similar are deprecated. Use drm_dev based logging.
Link: https://lore.kernel.org/r/20250821130356.883553-1-raphael.gallais-pou@foss.st.com
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Link: https://lore.kernel.org/r/20250825132951.547899-1-raphael.gallais-pou@foss.st.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
|
|
Do not access CRTC state in drm_sysfb_plane_helper_atomic_disable().
Use format from sysfb device for clearing scanout buffer. This is
the behavior from before commit 061963cd9e5b ("drm/sysfb: Blit to
CRTC destination format").
When being disabled, the plane has no associated CRTC. Trying to deref
the format pointer results in a segmentation fault. An example stack
track is shown below.
[ 58.948915] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000023: 0000 [#1] SMP KASAN PTI
[ 58.959971] KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
[...]
[ 58.979308] RIP: 0010:drm_sysfb_plane_helper_atomic_disable+0x1af/0x520
[...]
[ 59.084227] Call Trace:
[ 59.086682] <TASK>
[ 59.088793] ? __pfx_drm_sysfb_plane_helper_atomic_disable+0x10/0x10
[ 59.095155] ? crtc_disable+0xf2/0x5a0
[ 59.098920] drm_atomic_helper_commit_planes+0x848/0x1030
[ 59.104336] drm_atomic_helper_commit_tail+0x41/0xb0
[ 59.109316] commit_tail+0x204/0x330
[ 59.112903] drm_atomic_helper_commit+0x242/0x2e0
[ 59.117618] ? __pfx_drm_atomic_helper_commit+0x10/0x10
[ 59.122851] drm_atomic_commit+0x1e1/0x290
[ 59.126957] ? drm_atomic_add_affected_connectors+0x266/0x330
[ 59.132714] ? __pfx_drm_atomic_commit+0x10/0x10
[ 59.137343] ? __pfx___drm_printfn_info+0x10/0x10
[ 59.142058] ? drm_atomic_set_crtc_for_connector+0x436/0x630
[ 59.147729] atomic_remove_fb+0x631/0x920
[ 59.151751] ? save_trace+0xcf/0x180
[ 59.155343] ? __pfx_atomic_remove_fb+0x10/0x10
[ 59.159890] ? __pfx___drm_dev_dbg+0x10/0x10
[ 59.164173] drm_framebuffer_remove+0x19a/0x710
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 061963cd9e5b ("drm/sysfb: Blit to CRTC destination format")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14874
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20250826145044.954396-1-tzimmermann@suse.de
|
|
Starting with commit f99508074e78 ("PM: domains: Detach on
device_unbind_cleanup()"), there is no longer a need to call
dev_pm_domain_detach() in the bus remove function. The
device_unbind_cleanup() function now handles this to avoid
invoking devres cleanup handlers while the PM domain is
powered off, which could otherwise lead to failures as
described in the above-mentioned commit.
Drop the explicit dev_pm_domain_detach() call and rely instead
on the flags passed to dev_pm_domain_attach() to power off the
domain.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250827101236.927313-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Never leave scheduled wcid entries on the temporary on-stack list
Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx")
Link: https://patch.msgid.link/20250827085352.51636-6-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Avoid leaking them or keeping the wcid on the tx list
Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx")
Link: https://patch.msgid.link/20250827085352.51636-5-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Since stations are recreated from scratch, all lists that wcids are added
to must be cleared before calling ieee80211_restart_hw.
Set wcid->sta = 0 for each wcid entry in order to ensure that they are
not added again before they are ready.
Fixes: 8a55712d124f ("wifi: mt76: mt7915: enable full system reset support")
Link: https://patch.msgid.link/20250827085352.51636-4-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Non-station wcid entries must not be passed to the rx functions.
In case of the global wcid entry, it could even lead to corruption in the wcid
array due to pointer being casted to struct mt7996_sta_link using container_of.
Fixes: 7464b12b7d92 ("wifi: mt76: mt7996: rework mt7996_rx_get_wcid to support MLO")
Link: https://patch.msgid.link/20250827085352.51636-3-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Polling and airtime reporting is valid for station entries only
Link: https://patch.msgid.link/20250827085352.51636-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
When a wcid can't be found, link_sta can be stale from a previous batch.
The code currently assumes that if link_sta is set, wcid is also non-zero.
Fix wcid NULL pointer dereference by resetting link_sta when a wcid entry
can't be found.
Fixes: 62da647a2b20 ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()")
Link: https://patch.msgid.link/20250827085352.51636-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
restore fix which was dropped during MLO rework
Fixes: f0b0b239b8f3 ("wifi: mt76: mt7996: rework mt7996_mac_write_txwi() for MLO support")
Signed-off-by: Chad Monroe <chad@monroe.io>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/180fffd409aa57f535a3d2c1951e41ae398ce09e.1754659732.git.chad@monroe.io
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Avoid leaking beacons on unrelated channels during scanning/roc
Fixes: c56d6edebc1f ("wifi: mt76: mt7996: use emulated hardware scan support")
Reported-by: Chad Monroe <chad.monroe@adtran.com>
Link: https://patch.msgid.link/20250813121106.81559-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Only put probe request packets in the offchannel queue if
IEEE80211_TX_CTRL_DONT_USE_RATE_MASK is set and IEEE80211_TX_CTL_TX_OFFCHAN
is unset.
Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx")
Reported-by: Chad Monroe <chad.monroe@adtran.com>
Link: https://patch.msgid.link/20250813121106.81559-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Return early in mt7925_mcu_sta_eht_mld_tlv() for non-MLD vifs to avoid bogus
MLD TLVs, and pass the proper connection state to sta_basic TLV.
Cc: stable@vger.kernel.org
Fixes: cb1353ef3473 ("wifi: mt76: mt7925: integrate *mlo_sta_cmd and *sta_cmd")
Reported-by: Tal Inbar <inbartdev@gmail.com>
Tested-by: Tal Inbar <inbartdev@gmail.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250818030201.997940-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
MT7925 is a connac3 device; using the connac2 helper mis-parses
TXWI and breaks AMPDU/BA accounting. Use the connac3-specific
helper mt7925_tx_check_aggr() instead,
Cc: stable@vger.kernel.org
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Reported-by: Nick Morrow <morrownr@gmail.com>
Tested-by: Nick Morrow <morrownr@gmail.com>
Tested-on: Netgear A9000 USB WiFi adapter
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250818020203.992338-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
When in SAP mode, if a STA disconnect, the SAP's BSS
should not be cleared.
Fixes: 0ebb60da8416 ("wifi: mt76: mt7925: adjust rm BSS flow to prevent next connection failure")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250728052612.39751-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
&dev->mt76.mutex lock is taken using mt792x_mutex_acquire(dev) but not
released in one of the error paths, add the unlock to fix it.
Fixes: 5cd0bd815c8a ("wifi: mt76: mt7925: fix NULL deref check in mt7925_change_vif_links")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202503031055.3ZRqxhAl-lkp@intel.com/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://patch.msgid.link/20250727140416.1153406-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
When station mode, don't disconnect when we get
channel switch from AP to DFS channel. Most APs
send CSA request after pass background CAC. In other
case we should disconnect after detect beacon miss.
Without patch when we get CSA to DFS channel get:
"kernel: wlo1: preparing for channel switch failed, disconnecting"
Fixes: 8aa2f59260eb ("wifi: mt76: mt7921: introduce CSA support")
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
Link: https://patch.msgid.link/20250716165443.28354-1-janusz.dziedzic@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
A new warning in clang [1] points out a couple of places where a hdr
variable is not initialized then passed along to skb_put_data().
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:1894:21: warning: variable 'hdr' is uninitialized when passed as a const pointer argument here [-Wuninitialized-const-pointer]
1894 | skb_put_data(skb, &hdr, sizeof(hdr));
| ^~~
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:3386:21: warning: variable 'hdr' is uninitialized when passed as a const pointer argument here [-Wuninitialized-const-pointer]
3386 | skb_put_data(skb, &hdr, sizeof(hdr));
| ^~~
Zero initialize these headers as done in other places in the driver when
there is nothing stored in the header.
Cc: stable@vger.kernel.org
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Link: https://github.com/llvm/llvm-project/commit/00dacf8c22f065cb52efb14cd091d441f19b319e [1]
Closes: https://github.com/ClangBuiltLinux/linux/issues/2104
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20250715-mt7996-fix-uninit-const-pointer-v1-1-b5d8d11d7b78@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Starting with commit dd26c1a23fd5 ("PCI: rcar-host: Switch to
msi_create_parent_irq_domain()"), the MSI parent IRQ domain is NULL because
the object of type struct irq_domain_info passed to:
msi_create_parent_irq_domain() ->
irq_domain_instantiate()() ->
__irq_domain_instantiate()
has no reference to the parent IRQ domain. Using msi->domain->parent as an
argument for generic_handle_domain_irq() leads to below error:
"Unable to handle kernel NULL pointer dereference at virtual address"
This error was identified while switching the upcoming RZ/G3S PCIe host
controller driver to msi_create_parent_irq_domain() (which was using a
similar pattern to handle MSIs (see link section)), but it was not tested
on hardware using the pcie-rcar-host controller driver due to lack of
hardware.
Fixes: dd26c1a23fd5 ("PCI: rcar-host: Switch to msi_create_parent_irq_domain()")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/all/20250704161410.3931884-6-claudiu.beznea.uj@bp.renesas.com
Link: https://patch.msgid.link/20250809144447.3939284-1-claudiu.beznea.uj@bp.renesas.com
|
|
Move functions out of virt/virtchnl.c to virt/rss.c.
Same "git tricks" used as for the split into virt/queues.c
that is immediately preceding this split.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove remaining portion of the stuff that stays within virtchnl.c,
(separate commits to have nicer, removal-only, history).
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Start removing stuff from virt/rss.c that will be kept in the main
virtchnl file.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add copy of virtchnl.c under the original name/location.
Now both virt/virtchnl.c and virt/rss.c have the same content,
and only the former of the two in use.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Temporary rename of virtchnl.c into rss.c
In order to split virtchnl.c in a way that makes it much easier
to still blame new file, we do it via multiple git steps.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Move queue configuration functions out of virtchnl.c to queues.c.
Technically the move was started by an earlier commit of the series,
that was duplicating virtchnl.c as queues.c (what forces git to nicely
show blame when asked), followed by a couple of cleanup commits (that
removed stuff that is not moved from the new file, again - multiple
commits, to avoid git saving on changes lines by reusing removed lines
as a content of some kept function), with this final commit actually
enabling compilation of the new file, removing stuff from the virtchnl.c,
and making some moved functions visible (via static keyword removal).
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove final portion of the stuff that stays within virtchnl.c,
(separate commits to have nicer, removal-only, history).
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove next piece of the content that stays in virtchnl.c,
(separate commits to have nicer git history).
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Start removing stuff from virt/queues.c that will be kept in the
main virtchnl file.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add copy of virtchnl.c under the original name/location.
Now both virt/virtchnl.c and virt/queues.c have the same content,
and only the former of the two is in use.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Temporary rename of virtchnl.c into queues.c
In order to split virtchnl.c in a way that makes it much easier
to still blame new file, we do it via multiple git steps.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
PSR work is using __psr_wait_for_idle_locked to ensure PSR exit is
completed before continuing to PSR activation. __psr_wait_for_idle_locked
is unlocking PSR mutex which allows PSR disable/enable and PSR
pause/resume while PSR idle is being wait. PSR enable status is already
checked after locking again PSR mutex but PSR pause counter check is
missing. Due to this PSR work may continue to PSR activation even PSR is
paused.
Fix this by checking PSR pause counter in __psr_wait_for_idle_locked after
PSR mutex is locked again.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jeevan B <jeevan.b@intel.com>
Link: https://lore.kernel.org/r/20250826074457.1992524-1-jouni.hogander@intel.com
|
|
To enable more complex parameterized testing scenarios, the
generate_params() function needs additional context beyond just
the previously generated parameter. This patch modifies the
generate_params() function signature to include an extra
`struct kunit *test` argument, giving test users access to the
parameterized test context when generating parameters.
The `struct kunit *test` argument was added as the first parameter
to the function signature as it aligns with the convention of other
KUnit functions that accept `struct kunit *test` first. This also
mirrors the "this" or "self" reference found in object-oriented
programming languages.
This patch also modifies xe_pci_live_device_gen_param() in xe_pci.c
and nthreads_gen_params() in kcsan_test.c to reflect this signature
change.
Link: https://lore.kernel.org/r/20250826091341.1427123-4-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
[Catch some additional gen_params signatures in drm/xe/tests --David]
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The hv_netvsc driver currently enables NAPI after opening the primary and
subchannels. This ordering creates a race: if the Hyper-V host places data
in the host -> guest ring buffer and signals the channel before
napi_enable() has been called, the channel callback will run but
napi_schedule_prep() will return false. As a result, the NAPI poller never
gets scheduled, the data in the ring buffer is not consumed, and the
receive queue may remain permanently stuck until another interrupt happens
to arrive.
Fix this by enabling NAPI and registering it with the RX/TX queues before
vmbus channel is opened. This guarantees that any early host signal after
open will correctly trigger NAPI scheduling and the ring buffer will be
drained.
Fixes: 76bb5db5c749d ("netvsc: fix use after free on module removal")
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20250825115627.GA32189@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, in the AF_XDP transmit paths, the CIC bit of
TX Desc3 is set for all packets. Setting this bit for
packets transmitting through queues that don't support
checksum offloading causes the TX DMA to get stuck after
transmitting some packets. This patch ensures the CIC bit
of TX Desc3 is set only if the TX queue supports checksum
offloading.
Fixes: 132c32ee5bc0 ("net: stmmac: Add TX via XDP zero-copy socket")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-3-c225fe4444c0@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct supported speed modes as per the XGMAC databook.
Commit 9cb54af214a7 ("net: stmmac: Fix IP-cores specific
MAC capabilities") removes support for 10M, 100M and
1000HD. 1000HD is not supported by XGMAC IP, but it does
support 10M and 100M FD mode for XGMAC version >= 2_20,
and it also supports 10M and 100M HD mode if the HDSEL bit
is set in the MAC_HW_FEATURE0 reg. This commit enables support
for 10M and 100M speed modes for XGMAC IP based on XGMAC
version and MAC capabilities.
Fixes: 9cb54af214a7 ("net: stmmac: Fix IP-cores specific MAC capabilities")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-2-c225fe4444c0@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enabling RX FIFO Overflow interrupts is counterproductive
and causes an interrupt storm when RX FIFO overflows.
Disabling this interrupt has no side effect and eliminates
interrupt storms when the RX FIFO overflows.
Commit 8a7cb245cf28 ("net: stmmac: Do not enable RX FIFO
overflow interrupts") disables RX FIFO overflow interrupts
for DWMAC4 IP and removes the corresponding handling of
this interrupt. This patch is doing the same thing for
XGMAC IP.
Fixes: 2142754f8b9c ("net: stmmac: Add MAC related callbacks for XGMAC2")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-1-c225fe4444c0@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The local Xoff value is being set before the firmware (FW) update.
In case of a failure where the FW is not updated with the new value,
there is no fallback to the previous value.
Update the local Xoff value after the FW has been successfully set.
Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-12-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Xon/Xoff sizes are derived from calculations that include
the port speed.
These settings need to be updated and applied whenever the
port speed is changed.
The port speed is typically set after the physical link goes down
and is negotiated as part of the link-up process between the two
connected interfaces.
Xon/Xoff parameters being updated at the point where the new
negotiated speed is established.
Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-11-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Xon/Xoff sizes are derived from calculation that include the MTU size.
Set Xon/Xoff when MTU is set.
If Xon/Xoff fails, set the previous MTU.
Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-10-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Changing flow steering modes is not allowed when eswitch is in switchdev
mode. This fix ensures that any steering mode change, including to
firmware steering, is correctly blocked while eswitch mode is switchdev.
Fixes: e890acd5ff18 ("net/mlx5: Add devlink flow_steering_mode parameter")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If PF (Physical Function) has SFs (Sub-Functions), since the SFs are not
taking part in the synchronization flow, sync reset can lead to fatal
error on the SFs, as the function will be closed unexpectedly from the
SF point of view.
Add a check to prevent sync reset when there are SFs on a PF device
which is not ECPF, as ECPF is teardowned gracefully before reset.
Fixes: 92501fa6e421 ("net/mlx5: Ack on sync_reset_request only if PF can do reset_now")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-8-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix lockdep assertion triggered during sync reset unload event. When the
sync reset flow is initiated using the devlink reload fw_activate
option, the PF already holds the devlink lock while handling unload
event. In this case, delegate sync reset unload event handling back to
the devlink callback process to avoid double-locking and resolve the
lockdep warning.
Kernel log:
WARNING: CPU: 9 PID: 1578 at devl_assert_locked+0x31/0x40
[...]
Call Trace:
<TASK>
mlx5_unload_one_devl_locked+0x2c/0xc0 [mlx5_core]
mlx5_sync_reset_unload_event+0xaf/0x2f0 [mlx5_core]
process_one_work+0x222/0x640
worker_thread+0x199/0x350
kthread+0x10b/0x230
? __pfx_worker_thread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x8e/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Fixes: 7a9770f1bfea ("net/mlx5: Handle sync reset unload event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-7-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The devlink reload fw_activate command performs firmware activation
followed by driver reload, while devlink reload driver_reinit triggers
only driver reload. However, the driver reload logic differs between the
two modes, as on driver_reinit mode mlx5 also reloads auxiliary drivers,
while in fw_activate mode the auxiliary drivers are suspended where
applicable.
Additionally, following the cited commit, if the device has multiple PFs,
the behavior during fw_activate may vary between PFs: one PF may suspend
auxiliary drivers, while another reloads them.
Align devlink dev reload fw_activate behavior with devlink dev reload
driver_reinit, to reload all auxiliary drivers.
Fixes: 72ed5d5624af ("net/mlx5: Suspend auxiliary devices only in case of PCI device suspend")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-6-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mlx5hws_pat_get_pattern(), when mlx5hws_pat_add_pattern_to_cache()
fails, the function attempts to clean up the pattern created by
mlx5hws_cmd_header_modify_pattern_create(). However, it incorrectly
uses *pattern_id which hasn't been set yet, instead of the local
ptrn_id variable that contains the actual pattern ID.
This results in attempting to destroy a pattern using uninitialized
data from the output parameter, rather than the valid pattern ID
returned by the firmware.
Use ptrn_id instead of *pattern_id in the cleanup path to properly
destroy the created pattern.
Fixes: aefc15a0fa1c ("net/mlx5: HWS, added modify header pattern and args handling")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mlx5hws_pat_calc_nop(), src_field and dst_field are passed to
hws_action_modify_get_target_fields() which should set their values.
However, if an invalid action type is encountered, these variables
remain uninitialized and are later used to update prev_src_field
and prev_dst_field.
Initialize both variables to INVALID_FIELD to ensure they have
defined values in all code paths.
Fixes: 01e035fd0380 ("net/mlx5: HWS, handle modify header actions dependency")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When an invalid stc_type is provided, the function allocates memory for
shared_stc but jumps to unlock_and_out without freeing it, causing a
memory leak.
Fix by jumping to free_shared_stc label instead to ensure proper cleanup.
Fixes: 504e536d9010 ("net/mlx5: HWS, added actions handling")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the error path of hws_pool_buddy_init(), the buddy allocator cleanup
doesn't free the allocator structure itself, causing a memory leak.
Add the missing kfree() to properly release all allocated memory.
Fixes: c61afff94373 ("net/mlx5: HWS, added memory management handling")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-08-25 (ice, ixgbe)
For ice:
Emil adds a check to ensure auxiliary device was created before tear
down to prevent NULL a pointer dereference.
Jake reworks flow for failed Tx scheduler configuration to allow for
proper recovery and operation. He also adjusts ice_adapter index for
E825C devices as use of DSN is incompatible with this device.
Michal corrects tracking of buffer allocation failure in
ice_clean_rx_irq().
For ixgbe:
Jedrzej adds __packed attribute to ixgbe_orom_civd_info to compatibility
with device OROM data.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ixgbe: fix ixgbe_orom_civd_info struct layout
ice: fix incorrect counter for buffer allocation failures
ice: use fixed adapter index for E825C embedded devices
ice: don't leave device non-functional if Tx scheduler config fails
ice: fix NULL pointer dereference in ice_unplug_aux_dev() on reset
====================
Link: https://patch.msgid.link/20250825215019.3442873-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
