| Age | Commit message (Collapse) | Author |
|---|
|
The existing usage of rx_ops to reach the hal APIs at multiple place
uses function pointer indirections. In order to avoid multiple function
pointer indirections, add an API to extract the required hal parameters in
the rx path right at the beginning and store them in a structure which
is then leveraged by rest of the rx path.
rx_desc_get_first_msdu
rx_desc_get_last_msdu
rx_desc_encrypt_valid
rx_desc_get_encrypt_type
rx_desc_get_decap_type
rx_desc_get_mesh_ctl
rx_desc_get_mpdu_seq_ctl_vld
rx_desc_get_mpdu_fc_valid
rx_desc_get_mpdu_start_seq_no
rx_desc_get_msdu_len
rx_desc_get_msdu_sgi
rx_desc_get_msdu_rate_mcs
rx_desc_get_msdu_rx_bw
rx_desc_get_msdu_freq
rx_desc_get_msdu_pkt_type
rx_desc_get_msdu_nss
rx_desc_get_mpdu_tid
rx_desc_get_mpdu_peer_id
rx_desc_mac_addr2_valid
rx_desc_mpdu_start_addr2
rx_desc_is_da_mcbc
dp_rx_h_msdu_done
dp_rx_h_l4_cksum_fail
dp_rx_h_ip_cksum_fail
dp_rx_h_is_decrypted
dp_rx_h_mpdu_err
Remove following unused HAL rx ops
rx_desc_get_hdr_status
rx_desc_get_attention
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250910181414.2062280-7-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Move the following callbacks from hal_rx_ops to hal_ops for use in
non-performance-critical paths:
rx_desc_set_msdu_len
rx_desc_get_dot11_hdr
rx_desc_get_crypto_header
rx_desc_copy_end_tlv
rx_desc_get_msdu_src_link_id
rx_desc_get_desc_size
hal_rx_ops currently includes callbacks used in both critical and
non-critical Rx paths. To reduce function pointer indirection in hot
path, performance-critical ops will be consolidated into a single
extraction API in a follow-up patch.
Begin cleanup by migrating non-performance-critical callbacks from
hal_rx_ops to hal_ops. Once the extraction API is in place, remove
hal_rx_ops entirely to simplify the HAL interface.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250910181414.2062280-6-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Replace following ops with direct function calls
rxdma_ring_wmask_rx_mpdu_start
rxdma_ring_wmask_rx_msdu_end
rx_desc_get_mpdu_start_offset
rx_desc_get_msdu_end_offset
Remove redundant ops entries following the switch to direct
function calls.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250910181414.2062280-5-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Rename HAL ops to follow a consistent hal ops format:
ath12k_hal_rx_xxxx_<chip>.
Remove "compact" references as non-compacts variant is no longer used.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250910181414.2062280-4-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Move the hal APIs from the existing common hal files to hardware specific
hal files.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250910181414.2062280-3-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Set compact TLV ops as the default ops by registering them in
hal_rx_ops by default for QCN, and remove non-compact TLV ops and the
corresponding hal APIs for QCN.
Please note that compact TLVs have been supported by the firmware since
the beginning of Wi-Fi 7, so backward compatibility has been maintained.
These changes are specific to QCN as WCN only support non-compact TLVs.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <quic_pnandesh@quicinc.com>
Signed-off-by: Ripan Deuri <quic_rdeuri@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250910181414.2062280-2-quic_rdeuri@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
GuC has an interface to set a power profile for the SLPC algorithm.
Base mode is default and ensures a balanced performance, power_saving
mode has conservative up/down thresholds and is suitable for use with
apps that typically need to be power efficient. This will result in
lower GT frequencies, thus consuming lower power.
Selected power profile will be displayed in this format:
$ cat power_profile
[base] power_saving
$ echo power_saving > power_profile
$ cat power_profile
base [power_saving]
v2: Address review comments (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250903232120.390190-1-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Merge a hibernation regression fix and an fix related to energy model
management for 6.17-rc6
* pm-sleep:
PM: hibernate: Restrict GFP mask in hibernation_snapshot()
* pm-em:
PM: EM: Add function for registering a PD without capacity update
|
|
Add a Rust driver for ARM Mali CSF-based GPUs. It is a port of Panthor
and therefore exposes Panthor's uAPI and name to userspace, and the
product of a joint effort between Collabora, Arm and Google engineers.
The aim is to incrementally develop Tyr with the abstractions that are
currently available until it is consider to be in parity with Panthor
feature-wise.
The development of Tyr itself started in January, after a few failed
attempts of converting Panthor piecewise through a mix of Rust and C
code. There is a downstream branch that's much further ahead in terms of
capabilities than this initial patch.
The downstream code is capable of booting the MCU, doing sync VM_BINDS
through the work-in-progress GPUVM abstraction and also doing (trivial)
submits through Asahi's drm_scheduler and dma_fence abstractions. So
basically, most of what one would expect a modern GPU driver to do,
except for power management and some other very important adjacent
pieces. It is not at the point where submits can correctly deal with
dependencies, or at the point where it can rotate access to the GPU
hardware fairly through a software scheduler, but that is simply a
matter of writing more code.
This first patch, however, only implements a subset of the current
features available downstream, as the rest is not implementable without
pulling in even more abstractions. In particular, a lot of things depend
on properly mapping memory on a given VA range, which itself depends on
the GPUVM abstraction that is currently work-in-progress. For this
reason, we still cannot boot the MCU and thus, cannot do much for the
moment.
This constitutes a change in the overall strategy that we have been
using to develop Tyr so far. By submitting small parts of the driver
upstream iteratively, we aim to:
a) evolve together with Nova and rvkms, hopefully reducing regressions
due to upstream changes (that may break us because we were not there, in
the first place)
b) prove any work-in-progress abstractions by having them run on a real
driver and hardware and,
c) provide a reason to work on and review said abstractions by providing
a user, which would be tyr itself.
Despite its limited feature-set, we offer IGT tests. It is only tested
on the rk3588, so any other SoC is probably not going to work at all for
now.
The skeleton is basically taken from Nova and also
rust_platform_driver.rs.
Lastly, the name "Tyr" is inspired by Norse mythology, reflecting ARM's
tradition of naming their GPUs after Nordic mythological figures and
places.
Co-developed-by: Beata Michalska <beata.michalska@arm.com>
Signed-off-by: Beata Michalska <beata.michalska@arm.com>
Co-developed-by: Carsten Haitzler <carsten.haitzler@foss.arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@foss.arm.com>
Co-developed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://www.collabora.com/news-and-blog/news-and-events/introducing-tyr-a-new-rust-drm-driver.html
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
[aliceryhl: minor Kconfig update on apply]
[aliceryhl: s/drm::device::/drm::/]
Link: https://lore.kernel.org/r/20250910-tyr-v3-1-dba3bc2ae623@collabora.com
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1 into char-misc-next
Krzysztof writes:
1-Wire bus drivers for v6.18
1. Correct missing interrupts in IMX 1-Wire Devicetree bindings.
2. Drop old, dead code from Matrox driver.
* tag 'w1-drv-6.18' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1:
w1: matrox: Remove some deadcode in matrox_w1_remove()
dt-bindings: w1: imx: Add an entry for the interrupts property
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Some more fixes:
- iwlwifi: fix 130/1030 devices
- ath12k: fix alignment, power save
- virt_wifi: fix crash
- cfg80211: disable per-link stats due
to buffer size issues
* tag 'wireless-2025-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: nl80211: completely disable per-link stats for now
wifi: virt_wifi: Fix page fault on connect
wifi: cfg80211: Fix "no buffer space available" error in nl80211_get_station() for MLO
wifi: iwlwifi: fix 130/1030 configs
wifi: ath12k: fix WMI TLV header misalignment
wifi: ath12k: Fix missing station power save configuration
====================
Link: https://patch.msgid.link/20250911100345.20025-3-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
mc13xxx_irq_ack() got deprecated and became dead code with commit
10f9edaeaa30 ("mfd: mc13xxx: Use regmap irq framework for interrupts").
It should be safe to remove it now.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Link: https://lore.kernel.org/r/20250811064358.1659-1-akurz@blala.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The recent changes to genpd makes a genpd OF provider that is powered-on at
initialization to stay powered-on, until the ->sync_state() callback is
invoked for it.
This may not happen at all, if we wait for a consumer device to be probed,
leading to wasting energy. There are ways to enforce the ->sync_state()
callback to be invoked, through sysfs or via the probe-defer-timeout, but
none of them in its current form are a good fit for rmobile-sysc PM
domains.
Let's therefore opt-out from this behaviour of genpd for now, by using the
GENPD_FLAG_NO_STAY_ON.
Link: https://lore.kernel.org/all/20250701114733.636510-1-ulf.hansson@linaro.org/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 0e789b491ba0 ("pmdomain: core: Leave powered-on genpds on until sync_state")
Fixes: 13a4b7fb6260 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The recent changes to genpd makes a genpd OF provider that is powered-on at
initialization to stay powered-on, until the ->sync_state() callback is
invoked for it.
This may not happen at all, if we wait for a consumer device to be probed,
leading to wasting energy. There are ways to enforce the ->sync_state()
callback to be invoked, through sysfs or via the probe-defer-timeout, but
none of them in its current form are a good fit for rcar-gen4-sysc PM
domains.
Let's therefore opt-out from this behaviour of genpd for now, by using the
GENPD_FLAG_NO_STAY_ON.
Link: https://lore.kernel.org/all/20250701114733.636510-1-ulf.hansson@linaro.org/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 0e789b491ba0 ("pmdomain: core: Leave powered-on genpds on until sync_state")
Fixes: 13a4b7fb6260 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The recent changes to genpd makes a genpd OF provider that is powered-on at
initialization to stay powered-on, until the ->sync_state() callback is
invoked for it.
This may not happen at all, if we wait for a consumer device to be probed,
leading to wasting energy. There are ways to enforce the ->sync_state()
callback to be invoked, through sysfs or via the probe-defer-timeout, but
none of them in its current form are a good fit for rcar-sysc PM domains.
Let's therefore opt-out from this behaviour of genpd for now, by using the
GENPD_FLAG_NO_STAY_ON.
Link: https://lore.kernel.org/all/20250701114733.636510-1-ulf.hansson@linaro.org/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 0e789b491ba0 ("pmdomain: core: Leave powered-on genpds on until sync_state")
Fixes: 13a4b7fb6260 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The deferred regulator retrieval for Rockchip PM domains are causing some
weird dependencies. More precisely, if the power-domain is powered-on from
the HW perspective, its corresponding regulator must not be powered-off via
regulator_init_complete(), which is a late_initcall_sync.
Even on platforms that don't have the domain-supply regulator specified for
the power-domain provider, may suffer from these problems.
More precisely, things just happen to work before, because
genpd_power_off_unused() (also a late_initcall_sync) managed to power-off
the PM domain before regulator_init_complete() powered-off the regulator.
Ideally this fragile dependency must be fixed properly for the Rockchip PM
domains, but until then, let's fallback to the previous behaviour by using
the GENPD_FLAG_NO_STAY_ON flag.
Link: https://lore.kernel.org/all/20250902-rk3576-lockup-regression-v1-1-c4a0c9daeb00@collabora.com/
Reported-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Fixes: 0e789b491ba0 ("pmdomain: core: Leave powered-on genpds on until sync_state")
Fixes: 13a4b7fb6260 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync")
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Recent changes to genpd prevents those PM domains being powered-on during
initialization from being powered-off during the boot sequence. Based upon
whether CONFIG_PM_CONFIG_PM_GENERIC_DOMAINS_OF is set of not, genpd relies
on the sync_state mechanism or the genpd_power_off_unused() (which is a
late_initcall_sync), to understand when it's okay to allow these PM domains
to be powered-off.
This new behaviour in genpd has lead to problems on different platforms.
Let's therefore restore the behavior of genpd_power_off_unused().
Moreover, let's introduce GENPD_FLAG_NO_STAY_ON, to allow genpd OF
providers to opt-out from the new behaviour.
Link: https://lore.kernel.org/all/20250701114733.636510-1-ulf.hansson@linaro.org/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/all/20250902-rk3576-lockup-regression-v1-1-c4a0c9daeb00@collabora.com/
Reported-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Fixes: 0e789b491ba0 ("pmdomain: core: Leave powered-on genpds on until sync_state")
Fixes: 13a4b7fb6260 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync")
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
xdp_update_skb_shared_info() needs to update skb state which
was maintained in xdp_buff / frame. Pass full flags into it,
instead of breaking it out bit by bit. We will need to add
a bit for unreadable frags (even tho XDP doesn't support
those the driver paths may be common), at which point almost
all call sites would become:
xdp_update_skb_shared_info(skb, num_frags,
sinfo->xdp_frags_size,
MY_PAGE_SIZE * num_frags,
xdp_buff_is_frag_pfmemalloc(xdp),
xdp_buff_is_frag_unreadable(xdp));
Keep a helper for accessing the flags, in case we need to
transform them somehow in the future (e.g. to cover up xdp_buff
vs xdp_frame differences).
While we are touching call callers - rename the helper to
xdp_update_skb_frags_info(), previous name may have implied that
it's shinfo that's updated. We are updating flags in struct sk_buff
based on frags that got attched.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20250905221539.2930285-2-kuba@kernel.org
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
hsr_get_port_ndev calls hsr_for_each_port, which need to hold rcu lock.
On the other hand, before return the port device, we need to hold the
device reference to avoid UaF in the caller function.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Fixes: 9c10dd8eed74 ("net: hsr: Create and export hsr_get_port_ndev()")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250905091533.377443-4-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Userspace relies on the ring field of gpu_scheduler tracepoints to
identify a drm_gpu_scheduler. The value of the ring field is taken from
sched->name.
Because we typically have multiple schedulers running in parallel in
each process, assign unique names to schedulers such that userspace can
distinguish them.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250902200624.428175-1-olvaffe@gmail.com
|
|
ACPM PMIC command handlers returned a u8 value when they should
have returned either zero or negative error codes.
Translate the APM PMIC errno to linux errno.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-input/aElHlTApXj-W_o1r@stanley.mountain/
Fixes: a88927b534ba ("firmware: add Exynos ACPM protocol driver")
Cc: stable@vger.kernel.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add support in the OP-TEE backend driver for dynamic protected memory
allocation using the SMC ABI.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Add support in the OP-TEE backend driver dynamic protected memory
allocation with FF-A.
The protected memory pools for dynamically allocated protected memory
are instantiated when requested by user-space. This instantiation can
fail if OP-TEE doesn't support the requested use-case of protected
memory.
Restricted memory pools based on a static carveout or dynamic allocation
can coexist for different use-cases. We use only dynamic allocation with
FF-A.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Add support in the OP-TEE backend driver for protected memory
allocation. The support is limited to only the SMC ABI and for secure
video buffers.
OP-TEE is probed for the range of protected physical memory and a
memory pool allocator is initialized if OP-TEE have support for such
memory.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Add tee_shm_alloc_dma_mem() to allocate DMA memory. The memory is
represented by a tee_shm object using the new flag TEE_SHM_DMA_MEM to
identify it as DMA memory. The allocated memory will later be lent to
the TEE to be used as protected memory.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Add a userspace API to create a tee_shm object that refers to a dmabuf
reference.
Userspace registers the dmabuf file descriptor as in a tee_shm object.
The registration is completed with a tee_shm returned file descriptor.
Userspace is free to close the dmabuf file descriptor after it has been
registered since all the resources are now held via the new tee_shm
object.
Closing the tee_shm file descriptor will eventually release all
resources used by the tee_shm object when all references are released.
The new IOCTL, TEE_IOC_SHM_REGISTER_FD, supports dmabuf references to
physically contiguous memory buffers. Dmabuf references acquired from
the TEE DMA-heap can be used as protected memory for Secure Video Path
and such use cases. It depends on the TEE and the TEE driver if dmabuf
references acquired by other means can be used.
A new tee_shm flag is added to identify tee_shm objects built from a
registered dmabuf, TEE_SHM_DMA_BUF.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Olivier Masse <olivier.masse@nxp.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Break out the memref handling into a separate helper function.
No change in behavior.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Implement DMA heap for protected DMA-buf allocation in the TEE
subsystem.
Protected memory refers to memory buffers behind a hardware enforced
firewall. It is not accessible to the kernel during normal circumstances
but rather only accessible to certain hardware IPs or CPUs executing in
higher or differently privileged mode than the kernel itself. This
interface allows to allocate and manage such protected memory buffers
via interaction with a TEE implementation.
The protected memory is allocated for a specific use-case, like Secure
Video Playback, Trusted UI, or Secure Video Recording where certain
hardware devices can access the memory.
The DMA-heaps are enabled explicitly by the TEE backend driver. The TEE
backend drivers needs to implement protected memory pool to manage the
protected memory.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Export the dma-buf heap functions to allow them to be used by the OP-TEE
driver. The OP-TEE driver wants to register and manage specific secure
DMA heaps with it.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Update the header files describing the secure world ABI, both with and
without FF-A. The ABI is extended to deal with protected memory, but as
usual backward compatible.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
The VESA AUX backlight fails to be enable luminance based backlight
mainpulation becaused luminance_set is false by default.
Fix it by using luminance support control capabitliy.
Fixes: e13af5166a359 ("drm/i915/backlight: Use drm helper to initialize edp backlight")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250823121647.275834-1-aaron.ma@canonical.com
|
|
Enable Panther Lake platforms to achieve PMC information from
Intel PMC SSRAM Telemetry driver and substate requirements data
from telemetry region.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20250910210629.11198-6-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add support to read and show S0ix blocker substate requirements.
Starting from Panther Lake, substate requirement data is provided
based on S0ix blockers instead of all low power mode requirements.
For platforms that support this new feature, add support to display
substate requirements based on S0ix blockers.
Change the "substate_requirements" attribute of Intel PMC Core
driver to show the substate requirements for each S0ix blocker
and the corresponding S0ix blocker value.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20250910210629.11198-5-xi.pardee@linux.intel.com
[ij: rename pmc_index -> pmc_idx]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Refactor pmc_core_substate_req_header_show() to accept a new argument.
This is a preparation patch to introduce a new way to show Low Power
Mode substate requirement data for platforms starting from Panther
Lake. Increased the size for the name column as the Low Power Mode
requirement register name is longer in newer platforms.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20250910210629.11198-4-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Move telemetry endpoint handling to pmc_core_get_telem_info(). This
is a preparation patch to introduce a new table to obtain Low Power
Mode substate requirement data for platforms starting from Panther
Lake.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250910210629.11198-3-xi.pardee@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Enable Lunar Lake platforms to achieve PMC information from
Intel PMC SSRAM Telemetry driver and substate requirements data
from telemetry region.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250910210629.11198-2-xi.pardee@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
This patch adds debug logging capabilities to monitor early pending
requests and their associated custom BIOS inputs during runtime.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-10-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
requests
Call the amd_pmf_invoke_cmd_enact() function to manage early pending
requests and their associated custom BIOS inputs. Add a return statement
for cases of failure.
The PMF driver will adjust power settings according to custom BIOS inputs
after assessing the policy conditions.
Also, add a new common routine amd_pmf_handle_early_preq() to handle early
BIOS pending requests for both v1 and v2 variants.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-9-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The current code fails to send multiple BIOS input data to the PMF-TA
for policy condition evaluation. Only the most recent BIOS input data is
properly sent to the PMF-TA, while previous inputs are overwritten with
the zeros.
To address this issue, the BIOS input data should be stored and passed on
to the PMF-TA.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-8-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The PMF ACPI Specification (APMF) has been revised to version 1.3 to allow
for additional custom BIOS inputs, enabling OEMs to have more precise
thermal management of the system. This update includes adding support to
the driver using the new data structure received from the BIOS through the
existing APMF interfaces.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-7-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
enable/disable
Implement a helper function to check if BIOS input notifications are
enabled or disabled.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-6-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The latest PMF TA has been updated with the additional structure members
for internal evaluation. Since this same structure is utilized in the
driver, it also needs to be updated on the driver side. Otherwise, there
will be a mismatch in the byte sizes when copying data from shared memory.
Suggested-by: Yijun Shen <Yijun.Shen@dell.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-5-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The existing amd_pmf driver is limited to supporting just two custom BIOS
inputs. However, with the updates to the latest PMF TA, there's a
requirement to broaden this capacity to handle 10 inputs, aligning with
the TA firmware's capabilities.
The necessary logic should be implemented to facilitate this expansion of
functionality.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-4-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Originally, the 'amd_pmf_get_custom_bios_inputs()' function was written
under the assumption that the BIOS would only send a single pending
request for the driver to process. However, following OEM enablement, it
became clear that multiple pending requests for custom BIOS inputs might
be sent at the same time, a scenario that the current code logic does not
support when it comes to handling multiple custom BIOS inputs.
To address this, the code logic needs to be improved to not only manage
multiple simultaneous custom BIOS inputs but also to ensure it is scalable
for future additional inputs.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The most recent PMF Trusted Application includes enhanced features that
allow for modifications to PMF thermal parameters such as PPT and PPT APU.
This update introduces the necessary driver support to utilize these
capabilities.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The length of the host command is a u16 stored in little endian byte
order, which needs byte order conversion to work correctly on big endian
systems.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-wireless/aLqZI4FfOI4iJZtf@stanley.mountain
Fixes: 7b6f16a25806 ("wifi: mwifiex: add rgpower table loading support")
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20250910-for-next-v1-1-3ee311706231@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Change "ret" from u8 to int type in redrat3_enable_detector() to store
negative error codes or zero returned by redrat3_send_cmd() and
usb_submit_urb() - this better aligns with the coding standards and
maintains code consistency.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Syzbot reports a KASAN issue as below:
BUG: KASAN: use-after-free in __create_pipe include/linux/usb.h:1945 [inline]
BUG: KASAN: use-after-free in send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627
Read of size 4 at addr ffff8880256fb000 by task syz-executor314/4465
CPU: 2 PID: 4465 Comm: syz-executor314 Not tainted 6.0.0-rc1-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x6e9 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
__create_pipe include/linux/usb.h:1945 [inline]
send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627
vfd_write+0x2d9/0x550 drivers/media/rc/imon.c:991
vfs_write+0x2d7/0xdd0 fs/read_write.c:576
ksys_write+0x127/0x250 fs/read_write.c:631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The iMON driver improperly releases the usb_device reference in
imon_disconnect without coordinating with active users of the
device.
Specifically, the fields usbdev_intf0 and usbdev_intf1 are not
protected by the users counter (ictx->users). During probe,
imon_init_intf0 or imon_init_intf1 increments the usb_device
reference count depending on the interface. However, during
disconnect, usb_put_dev is called unconditionally, regardless of
actual usage.
As a result, if vfd_write or other operations are still in
progress after disconnect, this can lead to a use-after-free of
the usb_device pointer.
Thread 1 vfd_write Thread 2 imon_disconnect
...
if
usb_put_dev(ictx->usbdev_intf0)
else
usb_put_dev(ictx->usbdev_intf1)
...
while
send_packet
if
pipe = usb_sndintpipe(
ictx->usbdev_intf0) UAF
else
pipe = usb_sndctrlpipe(
ictx->usbdev_intf0, 0) UAF
Guard access to usbdev_intf0 and usbdev_intf1 after disconnect by
checking ictx->disconnected in all writer paths. Add early return
with -ENODEV in send_packet(), vfd_write(), lcd_write() and
display_open() if the device is no longer present.
Set and read ictx->disconnected under ictx->lock to ensure memory
synchronization. Acquire the lock in imon_disconnect() before setting
the flag to synchronize with any ongoing operations.
Ensure writers exit early and safely after disconnect before the USB
core proceeds with cleanup.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Reported-by: syzbot+f1a69784f6efe748c3bf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f1a69784f6efe748c3bf
Fixes: 21677cfc562a ("V4L/DVB: ir-core: add imon driver")
Cc: stable@vger.kernel.org
Signed-off-by: Larshin Sergey <Sergey.Larshin@kaspersky.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
clang warned about two uninitialized variables used as return
values in the exhaustive eviction series.
Fix those.
Fixes: 1f1541720f65 ("drm/xe: Rework instances of variants of xe_bo_create_locked()")
Fixes: 7bcb6e38c14d ("drm/xe/display: Convert __xe_pin_fb_vma()")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20250910151128.49693-1-thomas.hellstrom@linux.intel.com
|
|
The driver inserts a VLAN header into RoCE packets when the
traffic was untagged by modifying the existing GID entries.
This has caused the firmware to enforce only VLAN-based
priority mappings, ignoring other valid priority configurations
set via APP TLVs (e.g., DSCP selectors).
Driver now has support for selecting the service level (vlan id)
and traffic class (dscp) during modify_qp. So no need to override
the priority update using the update gid method. Hence removing
the code that handles the above operation.
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Link: https://patch.msgid.link/20250908094516.18222-3-kalesh-anakkur.purayil@broadcom.com
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
