summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)Author
2012-03-10Merge branch 'board' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards * 'board' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: add minimal support for Nokia RM-696 ARM: OMAP: enable Bluetooth on the PandaBoard ARM: OMAP: pandora: add support for backlight and poweroff ARM: OMAP4: board-4430sdp: don't initialize value that is never used ARM: OMAP3: cm-t3517: add EMAC support ARM: OMAP: move generic EMAC init to separate file ARM: OMAP3: RX-51: add explicit mux configuration of tsc2005 control gpios ARM: OMAP: Add omap_reserve functionality (includes sync-up to 3.3-rc6)
2012-03-08viafb: avoid refresh and mode lookup in set_parFlorian Tobias Schandinat
As check_var already ensures that the mode is valid there is no need to do those expensive lookups here again. The only thing that might change is that the deprecated interface could report slightly different refresh rates due to rounding errors. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-08viafb: modetable conversionFlorian Tobias Schandinat
This patch converts the modetables used in viafb to - remove the strange thing that sync_end and blanking_end contained the length and not the absolute value - remove hundreds of useless defines - use fb_videomode and not our own definition so modes defined in the subsystem and received via EDID are compatible with ours As the modes are now stored in a flat structure and no longer in a tree like thing the lookup time was increased but as it is a rare event anyway it shouldn't matter. Otherwise the behaviour should be the same as before. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-08video:uvesafb: notice user when we failed to save hardware stateWang YanQing
uvesafb_open may failed to save hardware state when kmalloc failed in uvesafb_vbe_state_save, we should check this and notice user. Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-08video:uvesafb: Fix oops that uvesafb try to execute NX-protected pageWang YanQing
This patch fixes the oops below [ 81.560602] uvesafb: NVIDIA Corporation, GT216 Board - 0696a290, Chip Rev , OEM: NVIDIA, VBE v3.0 [ 81.609384] uvesafb: protected mode interface info at c000:d350 [ 81.609388] uvesafb: pmi: set display start = c00cd3b3, set palette = c00cd40e [ 81.609390] uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 81.614558] uvesafb: VBIOS/hardware doesn't support DDC transfers [ 81.614562] uvesafb: no monitor limits have been set, default refresh rate will be used [ 81.614994] uvesafb: scrolling: ypan using protected mode interface, yres_virtual=4915 [ 81.744147] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 81.744153] BUG: unable to handle kernel paging request at c00cd3b3 [ 81.744159] IP: [<c00cd3b3>] 0xc00cd3b2 [ 81.744167] *pdpt = 00000000016d6001 *pde = 0000000001c7b067 *pte = 80000000000cd163 [ 81.744171] Oops: 0011 [#1] SMP [ 81.744174] Modules linked in: uvesafb(+) cfbcopyarea cfbimgblt cfbfillrect [ 81.744178] [ 81.744181] Pid: 3497, comm: modprobe Not tainted 3.3.0-rc4NX+ #71 Acer Aspire 4741 /Aspire 4741 [ 81.744185] EIP: 0060:[<c00cd3b3>] EFLAGS: 00010246 CPU: 0 [ 81.744187] EIP is at 0xc00cd3b3 [ 81.744189] EAX: 00004f07 EBX: 00000000 ECX: 00000000 EDX: 00000000 [ 81.744191] ESI: f763f000 EDI: f763f6e8 EBP: f57f3a0c ESP: f57f3a00 [ 81.744192] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 81.744195] Process modprobe (pid: 3497, ti=f57f2000 task=f748c600 task.ti=f57f2000) [ 81.744196] Stack: [ 81.744197] f82512c5 f759341c 00000000 f57f3a30 c124a9bc 00000001 00000001 000001e0 [ 81.744202] f8251280 f763f000 f7593400 00000000 f57f3a40 c12598dd f5c0c000 00000000 [ 81.744206] f57f3b10 c1255efe c125a21a 00000006 f763f09c 00000000 c1c6cb60 f7593400 [ 81.744210] Call Trace: [ 81.744215] [<f82512c5>] ? uvesafb_pan_display+0x45/0x60 [uvesafb] [ 81.744222] [<c124a9bc>] fb_pan_display+0x10c/0x160 [ 81.744226] [<f8251280>] ? uvesafb_vbe_find_mode+0x180/0x180 [uvesafb] [ 81.744230] [<c12598dd>] bit_update_start+0x1d/0x50 [ 81.744232] [<c1255efe>] fbcon_switch+0x39e/0x550 [ 81.744235] [<c125a21a>] ? bit_cursor+0x4ea/0x560 [ 81.744240] [<c129b6cb>] redraw_screen+0x12b/0x220 [ 81.744245] [<c128843b>] ? tty_do_resize+0x3b/0xc0 [ 81.744247] [<c129ef42>] vc_do_resize+0x3d2/0x3e0 [ 81.744250] [<c129efb4>] vc_resize+0x14/0x20 [ 81.744253] [<c12586bd>] fbcon_init+0x29d/0x500 [ 81.744255] [<c12984c4>] ? set_inverse_trans_unicode+0xe4/0x110 [ 81.744258] [<c129b378>] visual_init+0xb8/0x150 [ 81.744261] [<c129c16c>] bind_con_driver+0x16c/0x360 [ 81.744264] [<c129b47e>] ? register_con_driver+0x6e/0x190 [ 81.744267] [<c129c3a1>] take_over_console+0x41/0x50 [ 81.744269] [<c1257b7a>] fbcon_takeover+0x6a/0xd0 [ 81.744272] [<c12594b8>] fbcon_event_notify+0x758/0x790 [ 81.744277] [<c10929e2>] notifier_call_chain+0x42/0xb0 [ 81.744280] [<c1092d30>] __blocking_notifier_call_chain+0x60/0x90 [ 81.744283] [<c1092d7a>] blocking_notifier_call_chain+0x1a/0x20 [ 81.744285] [<c124a5a1>] fb_notifier_call_chain+0x11/0x20 [ 81.744288] [<c124b759>] register_framebuffer+0x1d9/0x2b0 [ 81.744293] [<c1061c73>] ? ioremap_wc+0x33/0x40 [ 81.744298] [<f82537c6>] uvesafb_probe+0xaba/0xc40 [uvesafb] [ 81.744302] [<c12bb81f>] platform_drv_probe+0xf/0x20 [ 81.744306] [<c12ba558>] driver_probe_device+0x68/0x170 [ 81.744309] [<c12ba731>] __device_attach+0x41/0x50 [ 81.744313] [<c12b9088>] bus_for_each_drv+0x48/0x70 [ 81.744316] [<c12ba7f3>] device_attach+0x83/0xa0 [ 81.744319] [<c12ba6f0>] ? __driver_attach+0x90/0x90 [ 81.744321] [<c12b991f>] bus_probe_device+0x6f/0x90 [ 81.744324] [<c12b8a45>] device_add+0x5e5/0x680 [ 81.744329] [<c122a1a3>] ? kvasprintf+0x43/0x60 [ 81.744332] [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70 [ 81.744335] [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70 [ 81.744339] [<c12bbe9f>] platform_device_add+0xff/0x1b0 [ 81.744343] [<f8252906>] uvesafb_init+0x50/0x9b [uvesafb] [ 81.744346] [<c100111f>] do_one_initcall+0x2f/0x170 [ 81.744350] [<f82528b6>] ? uvesafb_is_valid_mode+0x66/0x66 [uvesafb] [ 81.744355] [<c10c6994>] sys_init_module+0xf4/0x1410 [ 81.744359] [<c1157fc0>] ? vfsmount_lock_local_unlock_cpu+0x30/0x30 [ 81.744363] [<c144cb10>] sysenter_do_call+0x12/0x36 [ 81.744365] Code: f5 00 00 00 32 f6 66 8b da 66 d1 e3 66 ba d4 03 8a e3 b0 1c 66 ef b0 1e 66 ef 8a e7 b0 1d 66 ef b0 1f 66 ef e8 fa 00 00 00 61 c3 <60> e8 c8 00 00 00 66 8b f3 66 8b da 66 ba d4 03 b0 0c 8a e5 66 [ 81.744388] EIP: [<c00cd3b3>] 0xc00cd3b3 SS:ESP 0068:f57f3a00 [ 81.744391] CR2: 00000000c00cd3b3 [ 81.744393] ---[ end trace 18b2c87c925b54d6 ]--- Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: stable@vger.kernel.org
2012-03-08udlfb: Fix invalid return codes in edid sysfs entry store functionOlivier Sobrie
Return a negative errno instead of zero in the write function of the sysfs entry in case of error. Also add a check on the return value of dlfb_setup_modes(). Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Acked-by: Bernie Thompson <bernie@plugable.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-08Merge branch 'next/cleanup-s3c24xx' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup * 'next/cleanup-s3c24xx' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (24 commits) ARM: S3C24XX: remove call to s3c24xx_setup_clocks ARM: S3C24XX: add get_rate for clk_p on S3C2416/2443 ARM: S3C24XX: add get_rate for clk_h on S3C2416/2443 ARM: S3C24XX: remove XXX_setup_clocks method from S3C2443 ARM: S3C24XX: remove obsolete S3C2416_DMA option ARM: S3C24XX: Reuse S3C2443 dma for S3C2416 ARM: S3C24XX: Fix indentation of dma-s3c2443 ARM: S3C24XX: Move device setup files to mach directory ARM: S3C24XX: Consolidate Simtec extensions ARM: S3C24XX: move simtec-specific code to mach directory ARM: S3C24XX: Move common-smdk code to mach directory ARM: S3C24XX: Move s3c2443-clock.c to mach-s3c24xx ARM: s3c2410_defconfig: update s3c2410_defconfig ARM: S3C2443: move mach-s3c2443/* into mach-s3c24xx/ ARM: S3C2440: move mach-s3c2440/* into mach-s3c24xx/ ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/ ARM: S3C2412: move mach-s3c2412/* into mach-s3c24xx/ ARM: S3C2410: move mach-s3c2410/* into mach-s3c24xx/ ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX ARM: S3C2410: move s3c2410_baseclk_add to clock.h ...
2012-03-07Merge branch 'topic/cleanup-s3c24xx' into next/cleanup-s3c24xxKukjin Kim
Conflicts: arch/arm/mach-s3c24xx/include/mach/system.h
2012-03-06ARM: OMAP: Remove remaining includes for mach/io.hTony Lindgren
These are no longer needed with the recent iomap.h changes. Reported-by: Rob Herring <robherring2@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-06backlight: Modified power control of pm860x backlightJett.Zhou
Since several sub modules such as backlight, leds and vibrator depend on the refernce group and internal oscillator in pm8606, so modified the power control of backlight in pm8606 by unified interface. Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06OMAPDSS: APPLY: print warning if wait_pending_extra_info_updates failsTomi Valkeinen
wait_pending_extra_info_updates() currently does a hacky second check for extra_info_update_ongoing() at the end of the function to show a warning if extra_info update is still ongoing. The call to extra_info_update_ongoing() should really be inside spinlock, but that's a bit heavy just for verification. Rather than that, check the return value of the wait_for_completion_timeout() and print an error if it has timeouted or returned an error. Even better would be to return the error value and act on it in the callers of wait_pending_extra_info_updates. However, it's not clear what the callers should do in case of an error, as the error should only happen if there's a bug in the driver or the HW. So we'll just print the warning for now. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-03-06OMAPDSS: MANAGER/APPLY: Add runtime_pm protection around wait_for_go/vsync ↵Lajos Molnar
functions If DSS suspends within the functions dss_mgr_wait_for_go(), dss_mgr_wait_for_go_ovl() or dss_mgr_wait_for_vsync(). It may lose it's clock and lead to a register access failure. Request runtime_pm around these functions. [archit@ti.com: Moved runtime_pm calls to wait_for_go/vsync functions rather then calling them from omap_dispc_wait_for_irq_interruptible_timeout()] Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-03-06OMAPDSS: DISPC: Fix FIR coefficientsLajos Molnar
coef3_M8 had an incorrect phase with 50% more intensity. This resulted in banding on slightly down/upscaled images. Fixed a rounding error in coef5_M9. Also removed ARRAY_LEN macro as ARRAY_SIZE is the standard linux one. Signed-off-by: Lajos Molnar <lajos@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-03-06OMAPDSS: DISPC: Fix OMAP4 supported color formatsLajos Molnar
Add missing but supported color formats for GFX pipeline in dss features: RGBX16-4444, RGBA16-4444 and XRGB16-1555. In dispc_ovl_set_color_mode(): - Remove unsupported modes on GFX pipeline: YUV2 and UYVY. Replace these by missing modes supported by GFX pipelines: RGBX16-4444 and RGBA16-4444. - Fix swapped modes on VID pipelines: RGBX16-4444 and XRGB16-4444. Signed-off-by: Lajos Molnar <lajos@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-03-06OMAPDSS: HDMI: Add M2 divider while calculating clkoutMythri P K
While calculating regm and regmf value add using M2 divider in the equation. Formula for calculating: Output clock on digital core domain: CLKOUT = (M / (N+1))*CLKINP*(1/M2) Internal oscillator output clock on internal LDO domain: CLKDCOLDO = (M / (N+1))*CLKINP The current code when allows variable M2 values as input ignores using M2 divider values in calculation of regm and regmf. so fix it by using M2 in calculation although the default value for M2 is 1. Signed-off-by: Mythri P K <mythripk@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-03-06video: s3c-fb: Add support EXYNOS5 FIMDJingoo Han
This patch adds s3c_fb_driverdata s3c_fb_data_exynos5 for EXYNOS5 and adds extended timing control setting. EXYNOS5 FIMD needs extended setting for video timing control. Additional bits are added to VIDTCON2, VIDWxxADD2, VIDOSDxA and VIDOSDxB registers in order to set timing value for lager resolution. Also, address offset of VIDTCONx registers is changed from 0x0 to 0x20000, thus variable type should be changed to int type to handle the address offset of VIDTCONx registers for EXYNOS5 FIMD. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-06pxafb: do console locking before calling fb_blank()Vasily Khoruzhick
Otherwise we hit WARN_CONSOLE_UNLOCKED in do_unblank_screen Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-06Merge commit 'v3.3-rc6'Tomi Valkeinen
Merge v3.3-rc6 to get the latest DSS and OMAP arch fixes. Conflicts: arch/arm/mach-omap1/board-innovator.c drivers/video/omap2/dss/apply.c
2012-03-06Merge commit 'v3.3-rc6' into fbdev-nextFlorian Tobias Schandinat
2012-03-05Merge pull request #1 from bernieplug/fbdev-nextFlorian Tobias Schandinat
udlfb patches for fbdev-next
2012-03-04viafb: LCD bpp cleanupFlorian Tobias Schandinat
This patch removes redundant bits per pixel information by using the one storged in var directly. Simplifies code without any functional changes. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-03udlfb: Add module_param to allow forcing pixel_limitBen Collins
Some user scenarios need to prioritize performance over maxiumum resolution. Also, some devices may have bad vendor descriptors, and this allows the user to set a pixel limit that matches their specific device to avoid blank screens on higher resolution monitors. 700000 minimum for DL-115, 2360000 maximum for DL-195 Signed-off-by: Ben Collins <bcollins@ubuntu.com> Signed-off-by: Bernie Thompson <bernie@plugable.com>
2012-03-03udlfb: Make sure to get correct endian keys from vendor descriptorBen Collins
The driver was not using le16_to_cpu when reading keys from the vendor descriptor, causing incorrect parsing. Mainly, sku_pixel_limit was not being parsed on big-endian systems. This would result in a blank screen on big-endian CPUs where the DL chips's max mode was smaller than the monitor's native mode. Signed-off-by: Ben Collins <bcollins@ubuntu.com> Signed-off-by: Bernie Thompson <bernie@plugable.com>
2012-03-02Merge tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6Linus Torvalds
fbdev fixes for 3.3 from Florian Tobias Schandinat It includes: - two fixes for OMAP HDMI - one fix to make new OMAP functions behave as they are supposed to - one Kconfig dependency fix - two fixes for viafb for modesetting on VX900 hardware * tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6: OMAPDSS: APPLY: make ovl_enable/disable synchronous OMAPDSS: panel-dvi: Add Kconfig dependency on I2C viafb: fix IGA1 modesetting on VX900 viafb: select HW scaling on VX900 for IGA2 OMAPDSS: HDMI: hot plug detect fix OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabled
2012-03-03ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XXKukjin Kim
This patch changes the ARCH name to "ARCH_S3C24XX" for Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, and S3C2450 SoCs so that we can merge the mach-xxx directories and plat-s3c24xx dir. to just one mach-s3c24xx for them. I think this should be sent to upstream via samsung tree because this touches many samsung stuff. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Greg Kroah-Hartman <gregkh@suse.de> [for the gadget part:] Acked-by: Felipe Balbi <balbi@ti.com> [for the framebuffer (video) part:] Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> [For the watchdog-part:] Acked-by: Wim Van Sebroeck <wim@iguana.be> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-01udlfb: fix hcd_buffer_free panic on unplug/replugBernie Thompson
Fix race conditions with unplug/replug behavior, in particular take care not to hold up USB probe/disconnect for long-running framebuffer operations and rely on usb to handle teardown. Fix for kernel panic reported with new F17 multiseat support. Reported-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Bernie Thompson <bernie@plugable.com>
2012-03-01udlfb: Improve debugging printouts with refresh rateMartin Decky
It is not very helpful to print a list of the same resolutions without the refresh rate. Signed-off-by: Bernie Thompson <bernie@plugable.com>
2012-03-01ARM: OMAP1: ams-delta: clean up init data section assignmentsJanusz Krzysztofik
The main purpose of this patch is to fix several section mismatch warnings from the board file and a few board specific drivers, introduced with recent Amstrad Delta patch series, some of them rising up only when building with CONFIG_MODULES not set. While being at it, section tagging of all init data found in the board file have been revised and hopefully corrected and/or optimized. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-03-01Merge branch 'omap1' into ams-deltaTony Lindgren
2012-02-29Merge branch 'fbdev-for-linus' into fbdev-nextFlorian Tobias Schandinat
2012-02-29OMAPDSS: APPLY: make ovl_enable/disable synchronousTomi Valkeinen
ovl->enable/disable are meant to be synchronous so that they can handle the configuration of fifo sizes. The current kernel doesn't configure fifo sizes yet, and so the code doesn't need to block to function (from omapdss driver's perspective). However, for the users of omapdss a non-blocking ovl->disable is confusing, because they don't know when the memory area is not used any more. Furthermore, when the fifo size configuration is added in the next merge window, the change from non-blocking to blocking could cause side effects to the users of omapdss. So by making the functions block already will keep them behaving in the same manner. And, while not the main purpose of this patch, this will also remove the compile warning: drivers/video/omap2/dss/apply.c:350: warning: 'wait_pending_extra_info_updates' defined but not used Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-29OMAPDSS: panel-dvi: Add Kconfig dependency on I2CTomi Valkeinen
panel-dvi uses i2c, but the Kconfig didn't have dependency on I2C. Add it. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-29Merge branch 'cleanup' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup * 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix L4_EMU_34XX_BASE error after iomap changes ARM: OMAP2+: Limit omap_read/write usage to legacy USB drivers ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.h ARM: OMAP2+: Move most of plat/io.h into local iomap.h ARM: OMAP1: Move most of plat/io.h into local iomap.h ARM: OMAP1: Move 16xx GPIO system clock to platform init code ARM: OMAP: Move omap_init_consistent_dma_size() to local common.h ARM: OMAP2+: Move SDRC related functions from io.h into local common.h ARM: OMAP2+: Drop DISPC L3 firewall code ARM: OMAP2xxx: PM: remove obsolete timer disable code in the suspend path ARM: OMAP: McSPI: Remove unused flag from struct omap2_mcspi_device_config (update to latest rmk/for-arm-soc branch) Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-24ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.hTony Lindgren
This is needed to minimize io.h so the SoC specific io.h for ARMs can removed. Note that minimal driver changes for DSS and RNG are needed to include cpu.h for SoC detection macros. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-24ARM: OMAP2+: Drop DISPC L3 firewall codeTony Lindgren
This is only needed when using SRAM for framebuffer, and the support for SRAM framebuffer is about to get removed. Otherwise we cannot move most of plat/io.h to be a local iomap.h for mach-omap2. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-24Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
SuperH fixes for 3.3-rc5 * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: Fix sh2a build error for CONFIG_CACHE_WRITETHROUGH sh: modify a resource of sh_eth_giga1_resources in board-sh7757lcr arch/sh: remove references to cpu_*_map. sh: Fix typo in pci-sh7780.c sh: add platform_device for SPI1 in setup-sh7757 sh: modify resource for SPI0 in setup-sh7757 sh: se7724: fix compile breakage sh: clkfwk: bugfix: use clk_reparent() for div6 clocks sh: clock-sh7724: fixup sh_fsi clock settings sh: sh7757lcr: update to the new MMCIF DMA configuration sh: fix the sh_mmcif_plat_data in board-sh7757lcr video: pvr2fb: Fix up spurious section mismatch warnings. sh: Defer to asm-generic/device.h.
2012-02-24FB: sa11x0: convert to use platform resource and ioremap()Russell King
Convert the sa11x0 framebuffer driver to obtain the base address of its hardware registers from the platform resources, and ioremap this rather than relying on the static mappings. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-24video: s3c-fb: use devm_request_irq()Jingoo Han
The devm_ functions allocate memory that is released when a driver detaches. This patch uses devm_request_irq of these functions. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-24drivers/video/pxa168fb.c: use devm_ functionsJulia Lawall
The various devm_ functions allocate memory that is released when a driver detaches. This patch uses these functions for data that is allocated in the probe function of a platform device and is only freed in the remove function. By using devm_ioremap, it also removes a potential memory leak, because there was no call to iounmap in the probe function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-24Merge branch 'fbdev-for-linus' into fbdev-nextFlorian Tobias Schandinat
2012-02-24viafb: fix IGA1 modesetting on VX900Florian Tobias Schandinat
Even if the documentation calls this bit "Reserved" it has to be set to 0 for correct modesetting on IGA1. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: stable@vger.kernel.org
2012-02-24viafb: select HW scaling on VX900 for IGA2Florian Tobias Schandinat
VX900 can do hardware scaling for both IGAs in contrast to previous hardware which could do it only for IGA2. This patch ensures that we set the parameter for IGA2 and not for IGA1. This fixes hardware scaling on VX900 until we have the infrastructure to support it for both IGAs. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: stable@vger.kernel.org
2012-02-24Merge branch 'for-3.3-rc' of git://gitorious.org/linux-omap-dss2/linux into ↵Florian Tobias Schandinat
fbdev-for-linus
2012-02-23OMAPDSS: HDMI: hot plug detect fixRob Clark
The "OMAPDSS: HDMI: PHY burnout fix" commit switched the HDMI driver over to using a GPIO for plug detect. Unfortunately the ->detect() method was not also updated, causing HDMI to no longer work for the omapdrm driver (because it would actually check if a connection was detected before attempting to enable display). Signed-off-by: Rob Clark <rob@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-23OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabledArchit Taneja
For DSS clock domain to transition from idle to active state. It's necessary to enable the optional clock DSS_FCLK before we enable the module using the MODULEMODE bits in the clock domain's CM_DSS_DSS_CLKCTRL register. This sequence was not followed correctly for the 'dss_hdmi' hwmod and it led to DSS clock domain not getting out of idle when pm_runtime_get_sync() was called for hdmi's platform device. Since the clock domain failed to change it's state to active, the hwmod code disables any clocks it had enabled before for this hwmod. This led to the clock 'dss_48mhz_clk' gettind disabled. When hdmi's runtime_resume() op is called, the call to dss_runtime_get() correctly enables the DSS clock domain this time. However, the clock 'dss_48mhz_clk' is needed for HDMI's PHY to function correctly. Since it was disabled previously, the driver fails when it tries to enable HDMI's PHY. Fix this for now by ensuring that dss_runtime_get() is called before we call pm_runtime_get_sync() for hdmi's platform device. A correct fix for later would be to modify the DSS related hwmod's mainclks, and also some changes in how opt clocks are handled in the DSS driver. This fixes the issue of HDMI not working when it's the default display. The issue is not seen if any other display is already enabled as the first display would have correctly enabled the DSS clockdomain. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-23Merge branch 'work/old-omapfb-removal'Tomi Valkeinen
2012-02-23OMAPFB: remove remaining OMAP arch checksTomi Valkeinen
Now that the old omapfb driver is only omap1 display driver, there's no need to check if the arch is omap1. This patch removes the few remaining checks for the arch. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2012-02-23OMAPFB: Move old omapfb private structs to a private include fileTomi Valkeinen
include/linux/omapfb.h contains structs that are used only by the omapfb driver. Move the structs into drivers/video/omap/omapfb.h. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-23OMAPFB: remove unused fb_format_to_dss_mode()Tomi Valkeinen
fb_format_to_dss_mode() function is no longer used, so remove it. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-02-23OMAPFB: remove mem info from platform_dataTomi Valkeinen
omapfb driver used platform_data to get fb memory areas and formats defined by the board file. This patch removes omapfb's (both old and new omapfb) use of the memory data in platform_data, because: - No board uses them currently - It's not board file's job to define things like amount of default framebuffer memory. These should come from the bootloader via command line parameters. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
generated by cgit v1.2.3 (git 2.51.0) at 2026-11-05 07:46:14 +0000