summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2023-06-28usb: gadget: udc: fix NULL dereference in remove()Dan Carpenter
[ Upstream commit 016da9c65fec9f0e78c4909ed9a0f2d567af6775 ] The "udc" pointer was never set in the probe() function so it will lead to a NULL dereference in udc_pci_remove() when we do: usb_del_gadget_udc(&udc->gadget); Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/ZG+A/dNpFWAlCChk@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-21usb: dwc3: gadget: Reset num TRBs before giving back the requestElson Roy Serrao
commit 00f8205ffcf112dcef14f8151d78075d38d22c08 upstream. Consider a scenario where cable disconnect happens when there is an active usb reqest queued to the UDC. As part of the disconnect we would issue an end transfer with no interrupt-on-completion before giving back this request. Since we are giving back the request without skipping TRBs the num_trbs field of dwc3_request still holds the stale value previously used. Function drivers re-use same request for a given bind-unbind session and hence their dwc3_request context gets preserved across cable disconnect/connect. When such a request gets re-queued after cable connect, we would increase the num_trbs field on top of the previous stale value thus incorrectly representing the number of TRBs used. Fix this by resetting num_trbs field before giving back the request. Fixes: 09fe1f8d7e2f ("usb: dwc3: gadget: track number of TRBs per request") Cc: stable <stable@kernel.org> Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Message-ID: <1685654850-8468-1-git-send-email-quic_eserrao@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21USB: dwc3: fix use-after-free on core driver unbindJohan Hovold
commit e3dbb657571509044be15184a13134fa7c1fdca1 upstream. Some dwc3 glue drivers are currently accessing the driver data of the child core device directly, which is clearly a bad idea as the child may not have probed yet or may have been unbound from its driver. As a workaround until the glue drivers have been fixed, clear the driver data pointer before allowing the glue parent device to runtime suspend to prevent its driver from accessing data that has been freed during unbind. Fixes: 6dd2565989b4 ("usb: dwc3: add imx8mp dwc3 glue layer driver") Fixes: 6895ea55c385 ("usb: dwc3: qcom: Configure wakeup interrupts during suspend") Cc: stable@vger.kernel.org # 5.12 Cc: Li Jun <jun.li@nxp.com> Cc: Sandeep Maheswaram <quic_c_sanm@quicinc.com> Cc: Krishna Kurapati <quic_kriskura@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Message-ID: <20230607100540.31045-3-johan+linaro@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21USB: dwc3: qcom: fix NULL-deref on suspendJohan Hovold
commit d2d69354226de0b333d4405981f3d9c41ba8430a upstream. The Qualcomm dwc3 glue driver is currently accessing the driver data of the child core device during suspend and on wakeup interrupts. This is clearly a bad idea as the child may not have probed yet or could have been unbound from its driver. The first such layering violation was part of the initial version of the driver, but this was later made worse when the hack that accesses the driver data of the grand child xhci device to configure the wakeup interrupts was added. Fixing this properly is not that easily done, so add a sanity check to make sure that the child driver data is non-NULL before dereferencing it for now. Note that this relies on subtleties like the fact that driver core is making sure that the parent is not suspended while the child is probing. Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/all/20230325165217.31069-4-manivannan.sadhasivam@linaro.org/ Fixes: d9152161b4bf ("usb: dwc3: Add Qualcomm DWC3 glue layer driver") Fixes: 6895ea55c385 ("usb: dwc3: qcom: Configure wakeup interrupts during suspend") Cc: stable@vger.kernel.org # 3.18: a872ab303d5d: "usb: dwc3: qcom: fix use-after-free on runtime-PM wakeup" Cc: Sandeep Maheswaram <quic_c_sanm@quicinc.com> Cc: Krishna Kurapati <quic_kriskura@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Message-ID: <20230607100540.31045-2-johan+linaro@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21usb: gadget: udc: renesas_usb3: Fix RZ/V2M {modprobe,bind} errorBiju Das
commit 3e6ac852fbc71a234de24b5455086f6b98d3d958 upstream. Currently {modprobe, bind} after {rmmod, unbind} results in probe failure. genirq: Flags mismatch irq 22. 00000004 (85070400.usb3drd) vs. 00000004 (85070400.usb3drd) renesas_usb3: probe of 85070000.usb3peri failed with error -16 The reason is, it is trying to register an interrupt handler for the same IRQ twice. The devm_request_irq() was called with the parent device. So the interrupt handler won't be unregistered when the usb3-peri device is unbound. Fix this issue by replacing "parent dev"->"dev" as the irq resource is managed by this driver. Fixes: 9cad72dfc556 ("usb: gadget: Add support for RZ/V2M USB3DRD driver") Cc: stable <stable@kernel.org> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Message-ID: <20230530161720.179927-1-biju.das.jz@bp.renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21usb: gadget: udc: core: Prevent soft_connect_store() raceBadhri Jagan Sridharan
commit 286d9975a838d0a54da049765fa1d1fb96b89682 upstream. usb_udc_connect_control(), soft_connect_store() and usb_gadget_deactivate() can potentially race against each other to invoke usb_gadget_connect()/usb_gadget_disconnect(). To prevent this, guard udc->started, gadget->allow_connect, gadget->deactivate and gadget->connect with connect_lock so that ->pullup() is only invoked when the gadget is bound, started and not deactivated. The routines usb_gadget_connect_locked(), usb_gadget_disconnect_locked(), usb_udc_connect_control_locked(), usb_gadget_udc_start_locked(), usb_gadget_udc_stop_locked() are called with this lock held. An earlier version of this commit was reverted due to the crash reported in https://lore.kernel.org/all/ZF4BvgsOyoKxdPFF@francesco-nb.int.toradex.com/. commit 16737e78d190 ("usb: gadget: udc: core: Offload usb_udc_vbus_handler processing") addresses the crash reported. Cc: stable@vger.kernel.org Fixes: 628ef0d273a6 ("usb: udc: add usb_udc_vbus_handler") Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Message-ID: <20230609010227.978661-2-badhri@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21usb: gadget: udc: core: Offload usb_udc_vbus_handler processingBadhri Jagan Sridharan
commit 50966da807c81c5eb3bdfd392990fe0bba94d1ee upstream. usb_udc_vbus_handler() can be invoked from interrupt context by irq handlers of the gadget drivers, however, usb_udc_connect_control() has to run in non-atomic context due to the following: a. Some of the gadget driver implementations expect the ->pullup callback to be invoked in non-atomic context. b. usb_gadget_disconnect() acquires udc_lock which is a mutex. Hence offload invocation of usb_udc_connect_control() to workqueue. UDC should not be pulled up unless gadget driver is bound. The new flag "allow_connect" is now set by gadget_bind_driver() and cleared by gadget_unbind_driver(). This prevents work item to pull up the gadget even if queued when the gadget driver is already unbound. Cc: stable@vger.kernel.org Fixes: 1016fc0c096c ("USB: gadget: Fix obscure lockdep violation for udc_mutex") Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Message-ID: <20230609010227.978661-1-badhri@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21usb: typec: Fix fast_role_swap_current show functionPavan Holla
commit 92c9c3baad6b1fd584fbabeaa4756f9b77926cb5 upstream. The current implementation mistakenly performs a & operation on the output of sysfs_emit. This patch performs the & operation before calling sysfs_emit. Fixes: 662a60102c12 ("usb: typec: Separate USB Power Delivery from USB Type-C") Cc: stable <stable@kernel.org> Reported-by: Benson Leung <bleung@chromium.org> Signed-off-by: Pavan Holla <pholla@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Benson Leung <bleung@chromium.org> Message-ID: <20230607193328.3359487-1-pholla@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21usb: typec: ucsi: Fix command cancellationHeikki Krogerus
commit c4a8bfabefed706bb9150867db528ceefd5cb5fe upstream. The Cancel command was passed to the write callback as the offset instead of as the actual command which caused NULL pointer dereference. Reported-by: Stephan Bolten <stephan.bolten@gmx.net> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217517 Fixes: 094902bc6a3c ("usb: typec: ucsi: Always cancel the command if PPM reports BUSY condition") Cc: stable@vger.kernel.org Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Message-ID: <20230606115802.79339-1-heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21USB: serial: option: add Quectel EM061KGL seriesJerry Meng
commit f1832e2b5e498e258b090af3b065b85cf8cc5161 upstream. Add support for Quectel EM061KGL series which are based on Qualcomm SDX12 chip: EM061KGL_LTA(0x2c7c / 0x0123): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL EM061KGL_LMS(0x2c7c / 0x0124): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL EM061KGL_LWW(0x2c7c / 0x6008): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL EM061KGL_LCN(0x2c7c / 0x6009): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL Above products use the exact same interface layout and option driver is for interfaces DIAG, NMEA and AT. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6008 Rev= 5.04 S: Manufacturer=Quectel S: Product=Quectel EM061K-GL S: SerialNumber=f6fa08b6 C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jerry Meng <jerry-meng@foxmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14usb: usbfs: Use consistent mmap functionsRuihan Li
commit d0b861653f8c16839c3035875b556afc4472f941 upstream. When hcd->localmem_pool is non-null, localmem_pool is used to allocate DMA memory. In this case, the dma address will be properly returned (in dma_handle), and dma_mmap_coherent should be used to map this memory into the user space. However, the current implementation uses pfn_remap_range, which is supposed to map normal pages. Instead of repeating the logic in the memory allocation function, this patch introduces a more robust solution. Here, the type of allocated memory is checked by testing whether dma_handle is properly set. If dma_handle is properly returned, it means some DMA pages are allocated and dma_mmap_coherent should be used to map them. Otherwise, normal pages are allocated and pfn_remap_range should be called. This ensures that the correct mmap functions are used consistently, independently with logic details that determine which type of memory gets allocated. Fixes: a0e710a7def4 ("USB: usbfs: fix mmap dma mismatch") Cc: stable@vger.kernel.org Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Link: https://lore.kernel.org/r/20230515130958.32471-3-lrh2000@pku.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-14usb: usbfs: Enforce page requirements for mmapRuihan Li
commit 0143d148d1e882fb1538dc9974c94d63961719b9 upstream. The current implementation of usbdev_mmap uses usb_alloc_coherent to allocate memory pages that will later be mapped into the user space. Meanwhile, usb_alloc_coherent employs three different methods to allocate memory, as outlined below: * If hcd->localmem_pool is non-null, it uses gen_pool_dma_alloc to allocate memory; * If DMA is not available, it uses kmalloc to allocate memory; * Otherwise, it uses dma_alloc_coherent. However, it should be noted that gen_pool_dma_alloc does not guarantee that the resulting memory will be page-aligned. Furthermore, trying to map slab pages (i.e., memory allocated by kmalloc) into the user space is not resonable and can lead to problems, such as a type confusion bug when PAGE_TABLE_CHECK=y [1]. To address these issues, this patch introduces hcd_alloc_coherent_pages, which addresses the above two problems. Specifically, hcd_alloc_coherent_pages uses gen_pool_dma_alloc_align instead of gen_pool_dma_alloc to ensure that the memory is page-aligned. To replace kmalloc, hcd_alloc_coherent_pages directly allocates pages by calling __get_free_pages. Reported-by: syzbot+fcf1a817ceb50935ce99@syzkaller.appspotmail.comm Closes: https://lore.kernel.org/lkml/000000000000258e5e05fae79fc1@google.com/ [1] Fixes: f7d34b445abc ("USB: Add support for usbfs zerocopy.") Fixes: ff2437befd8f ("usb: host: Fix excessive alignment restriction for local memory allocations") Cc: stable@vger.kernel.org Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230515130958.32471-2-lrh2000@pku.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-09usb: gadget: f_fs: Add unbind event before functionfs_unbindUttkarsh Aggarwal
commit efb6b535207395a5c7317993602e2503ca8cb4b3 upstream. While exercising the unbind path, with the current implementation the functionfs_unbind would be calling which waits for the ffs->mutex to be available, however within the same time ffs_ep0_read is invoked & if no setup packets are pending, it will invoke function wait_event_interruptible_exclusive_locked_irq which by definition waits for the ev.count to be increased inside the same mutex for which functionfs_unbind is waiting. This creates deadlock situation because the functionfs_unbind won't get the lock until ev.count is increased which can only happen if the caller ffs_func_unbind can proceed further. Following is the illustration: CPU1 CPU2 ffs_func_unbind() ffs_ep0_read() mutex_lock(ffs->mutex) wait_event(ffs->ev.count) functionfs_unbind() mutex_lock(ffs->mutex) mutex_unlock(ffs->mutex) ffs_event_add() <deadlock> Fix this by moving the event unbind before functionfs_unbind to ensure the ev.count is incrased properly. Fixes: 6a19da111057 ("usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait") Cc: stable <stable@kernel.org> Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com> Link: https://lore.kernel.org/r/20230525092854.7992-1-quic_uaggarwa@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-09usb: cdns3: fix NCM gadget RX speed 20x slow than expection at iMX8QMFrank Li
commit dbe678f6192f27879ac9ff6bc7a1036aad85aae9 upstream. At iMX8QM platform, enable NCM gadget and run 'iperf3 -s'. At host, run 'iperf3 -V -c fe80::6863:98ff:feef:3e0%enxc6e147509498' [ 5] 0.00-1.00 sec 1.55 MBytes 13.0 Mbits/sec 90 4.18 KBytes [ 5] 1.00-2.00 sec 1.44 MBytes 12.0 Mbits/sec 75 4.18 KBytes [ 5] 2.00-3.00 sec 1.48 MBytes 12.4 Mbits/sec 75 4.18 KBytes Expected speed should be bigger than 300Mbits/sec. The root cause of this performance drop was found to be data corruption happening at 4K borders in some Ethernet packets, leading to TCP checksum errors. This corruption occurs from the position (4K - (address & 0x7F)) to 4K. The u_ether function's allocation of skb_buff reserves 64B, meaning all RX addresses resemble 0xXXXX0040. Force trb_burst_size to 16 can fix this problem. Cc: stable@vger.kernel.org Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20230518154946.3666662-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-30USB: sisusbvga: Add endpoint checksAlan Stern
commit df05a9b05e466a46725564528b277d0c570d0104 upstream. The syzbot fuzzer was able to provoke a WARNING from the sisusbvga driver: ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 1 PID: 26 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 1 PID: 26 Comm: kworker/1:1 Not tainted 6.2.0-rc5-syzkaller-00199-g5af6ce704936 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Code: 7c 24 18 e8 6c 50 80 fb 48 8b 7c 24 18 e8 62 1a 01 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 60 b1 fa 8a e8 84 b0 be 03 <0f> 0b e9 58 f8 ff ff e8 3e 50 80 fb 48 81 c5 c0 05 00 00 e9 84 f7 RSP: 0018:ffffc90000a1ed18 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff888012783a80 RSI: ffffffff816680ec RDI: fffff52000143d95 RBP: ffff888079020000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000003 R13: ffff888017d33370 R14: 0000000000000003 R15: ffff888021213600 FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005592753a60b0 CR3: 0000000022899000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sisusb_bulkout_msg drivers/usb/misc/sisusbvga/sisusbvga.c:224 [inline] sisusb_send_bulk_msg.constprop.0+0x904/0x1230 drivers/usb/misc/sisusbvga/sisusbvga.c:379 sisusb_send_bridge_packet drivers/usb/misc/sisusbvga/sisusbvga.c:567 [inline] sisusb_do_init_gfxdevice drivers/usb/misc/sisusbvga/sisusbvga.c:2077 [inline] sisusb_init_gfxdevice+0x87b/0x4000 drivers/usb/misc/sisusbvga/sisusbvga.c:2177 sisusb_probe+0x9cd/0xbe2 drivers/usb/misc/sisusbvga/sisusbvga.c:2869 ... The problem was caused by the fact that the driver does not check whether the endpoints it uses are actually present and have the appropriate types. This can be fixed by adding a simple check of the endpoints. Link: https://syzkaller.appspot.com/bug?extid=23be03b56c5259385d79 Reported-and-tested-by: syzbot+23be03b56c5259385d79@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/48ef98f7-51ae-4f63-b8d3-0ef2004bb60a@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-30USB: core: Add routines for endpoint checks in old driversAlan Stern
commit 13890626501ffda22b18213ddaf7930473da5792 upstream. Many of the older USB drivers in the Linux USB stack were written based simply on a vendor's device specification. They use the endpoint information in the spec and assume these endpoints will always be present, with the properties listed, in any device matching the given vendor and product IDs. While that may have been true back then, with spoofing and fuzzing it is not true any more. More and more we are finding that those old drivers need to perform at least a minimum of checking before they try to use any endpoint other than ep0. To make this checking as simple as possible, we now add a couple of utility routines to the USB core. usb_check_bulk_endpoints() and usb_check_int_endpoints() take an interface pointer together with a list of endpoint addresses (numbers and directions). They check that the interface's current alternate setting includes endpoints with those addresses and that each of these endpoints has the right type: bulk or interrupt, respectively. Although we already have usb_find_common_endpoints() and related routines meant for a similar purpose, they are not well suited for this kind of checking. Those routines find endpoints of various kinds, but only one (either the first or the last) of each kind, and they don't verify that the endpoints' addresses agree with what the caller expects. In theory the new routines could be more general: They could take a particular altsetting as their argument instead of always using the interface's current altsetting. In practice I think this won't matter too much; multiple altsettings tend to be used for transferring media (audio or visual) over isochronous endpoints, not bulk or interrupt. Drivers for such devices will generally require more sophisticated checking than these simplistic routines provide. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/dd2c8e8c-2c87-44ea-ba17-c64b97e201c9@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-30usb: dwc3: fix gadget mode suspend interrupt handler issueLinyu Yuan
[ Upstream commit 4e8ef34e36f2839ef8c8da521ab7035956436818 ] When work in gadget mode, currently driver doesn't update software level link_state correctly as link state change event is not enabled for most devices, in function dwc3_gadget_suspend_interrupt(), it will only pass suspend event to UDC core when software level link state changes, so when interrupt generated in sequences of suspend -> reset -> conndone -> suspend, link state is not updated during reset and conndone, so second suspend interrupt event will not pass to UDC core. Remove link_state compare in dwc3_gadget_suspend_interrupt() and add a suspended flag to replace the compare function. Fixes: 799e9dc82968 ("usb: dwc3: gadget: conditionally disable Link State change events") Cc: stable <stable@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Link: https://lore.kernel.org/r/20230512004524.31950-1-quic_linyyuan@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24xhci: Fix incorrect tracking of free space on transfer ringsMathias Nyman
commit fe82f16aafdaf8002281d3b9524291d4a4a28460 upstream. This incorrect tracking caused unnecessary ring expansion in some usecases which over days of use consume a lot of memory. xhci driver tries to keep track of free transfer blocks (TRBs) on the ring buffer, but failed to add back some cancelled transfers that were turned into no-op operations instead of just moving past them. This can happen if there are several queued pending transfers which then are cancelled in reverse order. Solve this by counting the numer of steps we move the dequeue pointer once we complete a transfer, and add it to the number of free trbs instead of just adding the trb number of the current transfer. This way we ensure we count the no-op trbs on the way as well. Fixes: 55f6153d8cc8 ("xhci: remove extra loop in interrupt context") Cc: stable@vger.kernel.org Reported-by: Miller Hunter <MillerH@hearthnhome.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217242 Tested-by: Miller Hunter <MillerH@hearthnhome.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230515134059.161110-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24xhci-pci: Only run d3cold avoidance quirk for s2idleMario Limonciello
commit 2a821fc3136d5d99dcb9de152be8a052ca27d870 upstream. Donghun reports that a notebook that has an AMD Ryzen 5700U but supports S3 has problems with USB after resuming from suspend. The issue was bisected down to commit d1658268e439 ("usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir"). As this issue only happens on S3, narrow the broken D3cold quirk to only run in s2idle. Fixes: d1658268e439 ("usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir") Reported-and-tested-by: Donghun Yoon <donghun.yoon@lge.com> Cc: stable@vger.kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230515134059.161110-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24Revert "usb: gadget: udc: core: Invoke usb_gadget_connect only when started"Francesco Dolcini
commit f22e9b67f19ccc73de1ae04375d4b30684e261f8 upstream. This reverts commit 0db213ea8eed5534a5169e807f28103cbc9d23df. It introduces an issues with configuring the USB gadget hangs forever on multiple Qualcomm and NXP i.MX SoC at least. Cc: stable@vger.kernel.org Fixes: 0db213ea8eed ("usb: gadget: udc: core: Invoke usb_gadget_connect only when started") Reported-by: Stephan Gerhold <stephan@gerhold.net> Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/all/ZF4BvgsOyoKxdPFF@francesco-nb.int.toradex.com/ Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20230512131435.205464-3-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24Revert "usb: gadget: udc: core: Prevent redundant calls to pullup"Francesco Dolcini
commit 5e1617210aede9f1b91bb9819c93097b6da481f9 upstream. This reverts commit a3afbf5cc887fc3401f012fe629810998ed61859. This depends on commit 0db213ea8eed ("usb: gadget: udc: core: Invoke usb_gadget_connect only when started") that introduces a regression, revert it till the issue is fixed. Cc: stable@vger.kernel.org Reported-by: Stephan Gerhold <stephan@gerhold.net> Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/all/ZF4BvgsOyoKxdPFF@francesco-nb.int.toradex.com/ Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20230512131435.205464-2-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24usb: typec: altmodes/displayport: fix pin_assignment_showBadhri Jagan Sridharan
commit d8f28269dd4bf9b55c3fb376ae31512730a96fce upstream. This patch fixes negative indexing of buf array in pin_assignment_show when get_current_pin_assignments returns 0 i.e. no compatible pin assignments are found. BUG: KASAN: use-after-free in pin_assignment_show+0x26c/0x33c ... Call trace: dump_backtrace+0x110/0x204 dump_stack_lvl+0x84/0xbc print_report+0x358/0x974 kasan_report+0x9c/0xfc __do_kernel_fault+0xd4/0x2d4 do_bad_area+0x48/0x168 do_tag_check_fault+0x24/0x38 do_mem_abort+0x6c/0x14c el1_abort+0x44/0x68 el1h_64_sync_handler+0x64/0xa4 el1h_64_sync+0x78/0x7c pin_assignment_show+0x26c/0x33c dev_attr_show+0x50/0xc0 Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230508214443.893436-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24usb: gadget: u_ether: Fix host MAC address caseKonrad Gräfe
commit 3c0f4f09c063e143822393d99cb2b19a85451c07 upstream. The CDC-ECM specification [1] requires to send the host MAC address as an uppercase hexadecimal string in chapter "5.4 Ethernet Networking Functional Descriptor": The Unicode character is chosen from the set of values 30h through 39h and 41h through 46h (0-9 and A-F). However, snprintf(.., "%pm", ..) generates a lowercase MAC address string. While most host drivers are tolerant to this, UsbNcm.sys on Windows 10 is not. Instead it uses a different MAC address with all bytes set to zero including and after the first byte containing a lowercase letter. On Windows 11 Microsoft fixed it, but apparently they did not backport the fix. This change fixes the issue by upper-casing the MAC to comply with the specification. [1]: https://www.usb.org/document-library/class-definitions-communication-devices-12, file ECM120.pdf Fixes: bcd4a1c40bee ("usb: gadget: u_ether: construct with default values and add setters/getters") Cc: stable@vger.kernel.org Signed-off-by: Konrad Gräfe <k.graefe@gateware.de> Link: https://lore.kernel.org/r/20230505143640.443014-1-k.graefe@gateware.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24usb: dwc3: debugfs: Resume dwc3 before accessing registersUdipto Goswami
commit 614ce6a2ea50068b45339257891e51e639ac9001 upstream. When the dwc3 device is runtime suspended, various required clocks are in disabled state and it is not guaranteed that access to any registers would work. Depending on the SoC glue, a register read could be as benign as returning 0 or be fatal enough to hang the system. In order to prevent such scenarios of fatal errors, make sure to resume dwc3 then allow the function to proceed. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable@vger.kernel.org #3.2: 30332eeefec8: debugfs: regset32: Add Runtime PM support Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20230509144836.6803-1-quic_ugoswami@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume()Roger Quadros
commit c8540870af4ce6ddeb27a7bb5498b75fb29b643c upstream. Prevent -ETIMEDOUT error on .suspend(). e.g. If gadget driver is loaded and we are connected to a USB host, all transfers must be stopped before stopping the controller else we will not get a clean stop i.e. dwc3_gadget_run_stop() will take several seconds to complete and will return -ETIMEDOUT. Handle error cases properly in dwc3_gadget_suspend(). Simplify dwc3_gadget_resume() by using the introduced helper function. Fixes: 9f8a67b65a49 ("usb: dwc3: gadget: fix gadget suspend/resume") Cc: stable@vger.kernel.org Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Roger Quadros <rogerq@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20230503110048.30617-1-rogerq@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24USB: UHCI: adjust zhaoxin UHCI controllers OverCurrent bit valueWeitao Wang
commit dddb342b5b9e482bb213aecc08cbdb201ea4f8da upstream. OverCurrent condition is not standardized in the UHCI spec. Zhaoxin UHCI controllers report OverCurrent bit active off. In order to handle OverCurrent condition correctly, the uhci-hcd driver needs to be told to expect the active-off behavior. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable@vger.kernel.org Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230423105952.4526-1-WeitaoWang-oc@zhaoxin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24usb-storage: fix deadlock when a scsi command timeouts more than onceMaxime Bizon
commit a398d5eac6984316e71474e25b975688f282379b upstream. With faulty usb-storage devices, read/write can timeout, in that case the SCSI layer will abort and re-issue the command. USB storage has no internal timeout, it relies on SCSI layer aborting commands via .eh_abort_handler() for non those responsive devices. After two consecutive timeouts of the same command, SCSI layer calls .eh_device_reset_handler(), without calling .eh_abort_handler() first. With usb-storage, this causes a deadlock: -> .eh_device_reset_handler -> device_reset -> mutex_lock(&(us->dev_mutex)); mutex already by usb_stor_control_thread(), which is waiting for command completion: -> usb_stor_control_thread (mutex taken here) -> usb_stor_invoke_transport -> usb_stor_Bulk_transport -> usb_stor_bulk_srb -> usb_stor_bulk_transfer_sglist -> usb_sg_wait Make sure we cancel any pending command in .eh_device_reset_handler() to avoid this. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Cc: linux-usb@vger.kernel.org Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/all/ZEllnjMKT8ulZbJh@sakura/ Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230505114759.1189741-1-mbizon@freebox.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24USB: usbtmc: Fix direction for 0-length ioctl control messagesAlan Stern
commit 94d25e9128988c6a1fc9070f6e98215a95795bd8 upstream. The syzbot fuzzer found a problem in the usbtmc driver: When a user submits an ioctl for a 0-length control transfer, the driver does not check that the direction is set to OUT: ------------[ cut here ]------------ usb 3-1: BOGUS control dir, pipe 80000b80 doesn't match bRequestType fd WARNING: CPU: 0 PID: 5100 at drivers/usb/core/urb.c:411 usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 Modules linked in: CPU: 0 PID: 5100 Comm: syz-executor428 Not tainted 6.3.0-syzkaller-12049-g58390c8ce1bd #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 Code: 7c 24 40 e8 1b 13 5c fb 48 8b 7c 24 40 e8 21 1d f0 fe 45 89 e8 44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 e0 b5 fc 8a e8 19 c8 23 fb <0f> 0b e9 9f ee ff ff e8 ed 12 5c fb 0f b6 1d 12 8a 3c 08 31 ff 41 RSP: 0018:ffffc90003d2fb00 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8880789e9058 RCX: 0000000000000000 RDX: ffff888029593b80 RSI: ffffffff814c1447 RDI: 0000000000000001 RBP: ffff88801ea742f8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88802915e528 R13: 00000000000000fd R14: 0000000080000b80 R15: ffff8880222b3100 FS: 0000555556ca63c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9ef4d18150 CR3: 0000000073e5b000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153 usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1954 [inline] usbtmc_ioctl+0x1b3d/0x2840 drivers/usb/class/usbtmc.c:2097 To fix this, we must override the direction in the bRequestType field of the control request structure when the length is 0. Reported-and-tested-by: syzbot+ce77725b89b7bd52425c@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/linux-usb/000000000000716a3705f9adb8ee@google.com/ CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/ede1ee02-b718-49e7-a44c-51339fec706b@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24usb: typec: tcpm: fix multiple times discover svids errorFrank Wang
[ Upstream commit dac3b192107b978198e89ec0f77375738352e0c8 ] PD3.0 Spec 6.4.4.3.2 say that only Responder supports 12 or more SVIDs, the Discover SVIDs Command Shall be executed multiple times until a Discover SVIDs VDO is returned ending either with a SVID value of 0x0000 in the last part of the last VDO or with a VDO containing two SVIDs with values of 0x0000. In the current implementation, if the last VDO does not find that the Discover SVIDs Command would be executed multiple times even if the Responder SVIDs are less than 12, and we found some odd dockers just meet this case. So fix it. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Link: https://lore.kernel.org/r/20230316081149.24519-1-frank.wang@rock-chips.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24usb: typec: ucsi: acpi: add quirk for ASUS Zenbook UM325Samuel Čavoj
[ Upstream commit 326e1c208f3f24d14b93f910b8ae32c94923d22c ] On some ACPI platforms (namely the ASUS Zenbook UM325) the _DSM method must not be called after a notification is received but instead the mailbox should be read immediately from RAM. This is because the ACPI interrupt handler destroys the CCI in ERAM after copying to system memory, and when _DSM is later called to perform a second copy, it retrieves a garbage value. Instead, the _DSM(read) method should only be called when necessary, i.e. for polling the state after reset and for retrieving the version. Other reads should not call _DSM and only peek into the RAM region. This adds a separate read operation for the Zenbook that syncs the ACPI mailbox only with polled commands. Link: https://lore.kernel.org/linux-usb/20210823180626.tb6m7h5tp6adhvt2@fastboi.localdomain/ Signed-off-by: Samuel Čavoj <samuel@cavoj.net> [ heikki : handling everything in ucsi_acpi.c with DMI quirk ] Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230405134456.49607-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-24xhci: mem: Carefully calculate size for memory allocationsAndy Shevchenko
[ Upstream commit 347284984f415e52590373253c6943bbdc806ebf ] Carefully calculate size for memory allocations, i.e. with help of size_mul() macro from overflow.h. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17usb: dwc3: gadget: Execute gadget stop after halting the controllerWesley Cheng
[ Upstream commit 39674be56fba1cd3a03bf4617f523a35f85fd2c1 ] Do not call gadget stop until the poll for controller halt is completed. DEVTEN is cleared as part of gadget stop, so the intention to allow ep0 events to continue while waiting for controller halt is not happening. Fixes: c96683798e27 ("usb: dwc3: ep0: Don't prepare beyond Setup stage") Cc: stable@vger.kernel.org Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20230420212759.29429-2-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17USB: dwc3: gadget: drop dead hibernation codeJohan Hovold
[ Upstream commit bdb19d01026a5cccfa437be8adcf2df472c5889e ] The hibernation code is broken and has never been enabled in mainline and should thus be dropped. Remove the hibernation bits from the gadget code, which effectively reverts commits e1dadd3b0f27 ("usb: dwc3: workaround: bogus hibernation events") and 7b2a0368bbc9 ("usb: dwc3: gadget: set KEEP_CONNECT in case of hibernation") except for the spurious interrupt warning. Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230404072524.19014-5-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 39674be56fba ("usb: dwc3: gadget: Execute gadget stop after halting the controller") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11usb: mtu3: fix kernel panic at qmu transfer done irq handlerChunfeng Yun
[ Upstream commit d28f4091ea7ec3510fd6a3c6d433234e7a2bef14 ] When handle qmu transfer irq, it will unlock @mtu->lock before give back request, if another thread handle disconnect event at the same time, and try to disable ep, it may lock @mtu->lock and free qmu ring, then qmu irq hanlder may get a NULL gpd, avoid the KE by checking gpd's value before handling it. e.g. qmu done irq on cpu0 thread running on cpu1 qmu_done_tx() handle gpd [0] mtu3_requ_complete() mtu3_gadget_ep_disable() unlock @mtu->lock give back request lock @mtu->lock mtu3_ep_disable() mtu3_gpd_ring_free() unlock @mtu->lock lock @mtu->lock get next gpd [1] [1]: goto [0] to handle next gpd, and next gpd may be NULL. Fixes: 48e0d3735aa5 ("usb: mtu3: supports new QMU format") Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20230417025203.18097-3-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11usb: chipidea: fix missing goto in `ci_hdrc_probe`Yinhao Hu
[ Upstream commit d6f712f53b79f5017cdcefafb7a5aea9ec52da5d ] From the comment of ci_usb_phy_init, it returns an error code if usb_phy_init has failed, and it should do some clean up, not just return directly. Fix this by goto the error handling. Fixes: 74475ede784d ("usb: chipidea: move PHY operation to core") Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Yinhao Hu <dddddd@hust.edu.cn> Link: https://lore.kernel.org/r/20230412055852.971991-1-dddddd@hust.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11usb: gadget: tegra-xudc: Fix crash in vbus_drawJon Hunter
[ Upstream commit 5629d31955297ca47b9283c64fff70f2f34aa528 ] Commit ac82b56bda5f ("usb: gadget: tegra-xudc: Add vbus_draw support") populated the vbus_draw callback for the Tegra XUDC driver. The function tegra_xudc_gadget_vbus_draw(), that was added by this commit, assumes that the pointer 'curr_usbphy' has been initialised, which is not always the case because this is only initialised when the USB role is updated. Fix this crash, by checking that the 'curr_usbphy' is valid before dereferencing. Fixes: ac82b56bda5f ("usb: gadget: tegra-xudc: Add vbus_draw support") Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20230405181854.42355-1-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11usb: gadget: udc: renesas_usb3: Fix use after free bug in ↵Zheng Wang
renesas_usb3_remove due to race condition [ Upstream commit 2b947f8769be8b8181dc795fd292d3e7120f5204 ] In renesas_usb3_probe, role_work is bound with renesas_usb3_role_work. renesas_usb3_start will be called to start the work. If we remove the driver which will call usbhs_remove, there may be an unfinished work. The possible sequence is as follows: CPU0 CPU1 renesas_usb3_role_work renesas_usb3_remove usb_role_switch_unregister device_unregister kfree(sw) //free usb3->role_sw usb_role_switch_set_role //use usb3->role_sw The usb3->role_sw could be freed under such circumstance and then used in usb_role_switch_set_role. This bug was found by static analysis. And note that removing a driver is a root-only operation, and should never happen in normal case. But the root user may directly remove the device which will also trigger the remove function. Fix it by canceling the work before cleanup in the renesas_usb3_remove. Fixes: 39facfa01c9f ("usb: gadget: udc: renesas_usb3: Add register of usb role switch") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20230320062931.505170-1-zyytlz.wz@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11usb: dwc3: gadget: Change condition for processing suspend eventPrashanth K
[ Upstream commit 4decf4060ecfee1f7a710999fcd421645ac0c419 ] Currently we process the suspend interrupt event only if the device is in configured state. Consider a case where device is not configured and got suspend interrupt, in that case our gadget will still use 100mA as composite_suspend didn't happen. But battery charging specification (BC1.2) expects a downstream device to draw less than 2.5mA when unconnected OR suspended. Fix this by removing the condition for processing suspend event, and thus composite_resume would set vbus draw to 2. Fixes: 72704f876f50 ("dwc3: gadget: Implement the suspend entry event handler") Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/1677217619-10261-2-git-send-email-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11usb: host: xhci-rcar: remove leftover quirk handlingWolfram Sang
[ Upstream commit 5d67f4861884762ebc2bddb5d667444e45f25782 ] Loading V3 firmware does not need a quirk anymore, remove the leftover code. Fixes: ed8603e11124 ("usb: host: xhci-rcar: Simplify getting the firmware name for R-Car Gen3") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20230307163041.3815-10-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11scsi: target: Pass in cmd counter to use during cmd setupMike Christie
[ Upstream commit 8e288be8606ad87c1726618eacfb8fbd3ab4b806 ] Allow target_get_sess_cmd() users to pass in the cmd counter they want to use. Right now we pass in the session's cmd counter but in a subsequent commit iSCSI will switch from per session to per conn. Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20230319015620.96006-4-michael.christie@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Stable-dep-of: 395cee83d02d ("scsi: target: iscsit: Stop/wait on cmds during conn close") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11xhci: fix debugfs register accesses while suspendedJohan Hovold
commit 735baf1b23458f71a8b15cb924af22c9ff9cd125 upstream. Wire up the debugfs regset device pointer so that the controller is resumed before accessing registers to avoid crashing or locking up if it happens to be runtime suspended. Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver") Cc: stable@vger.kernel.org # 4.15: 30332eeefec8: debugfs: regset32: Add Runtime PM support Cc: stable@vger.kernel.org # 4.15 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230405090342.7363-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11USB: dwc3: fix runtime pm imbalance on unbindJohan Hovold
commit 44d257e9012ee8040e41d224d0e5bfb5ef5427ea upstream. Make sure to balance the runtime PM usage count on driver unbind by adding back the pm_runtime_allow() call that had been erroneously removed. Fixes: 266d0493900a ("usb: dwc3: core: don't trigger runtime pm when remove driver") Cc: stable@vger.kernel.org # 5.9 Cc: Li Jun <jun.li@nxp.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230404072524.19014-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11USB: dwc3: fix runtime pm imbalance on probe errorsJohan Hovold
commit 9a8ad10c9f2e0925ff26308ec6756b93fc2f4977 upstream. Make sure not to suspend the device when probe fails to avoid disabling clocks and phys multiple times. Fixes: 328082376aea ("usb: dwc3: fix runtime PM in error path") Cc: stable@vger.kernel.org # 4.8 Cc: Roger Quadros <rogerq@ti.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230404072524.19014-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11usb: dwc3: gadget: Stall and restart EP0 if host is unresponsiveWesley Cheng
commit 02435a739b81ae24aff5d6e930efef9458e2af3c upstream. It was observed that there are hosts that may complete pending SETUP transactions before the stop active transfers and controller halt occurs, leading to lingering endxfer commands on DEPs on subsequent pullup/gadget start iterations. dwc3_gadget_ep_disable name=ep8in flags=0x3009 direction=1 dwc3_gadget_ep_disable name=ep4in flags=1 direction=1 dwc3_gadget_ep_disable name=ep3out flags=1 direction=0 usb_gadget_disconnect deactivated=0 connected=0 ret=0 The sequence shows that the USB gadget disconnect (dwc3_gadget_pullup(0)) routine completed successfully, allowing for the USB gadget to proceed with a USB gadget connect. However, if this occurs the system runs into an issue where: BUG: spinlock already unlocked on CPU spin_bug+0x0 dwc3_remove_requests+0x278 dwc3_ep0_out_start+0xb0 __dwc3_gadget_start+0x25c This is due to the pending endxfers, leading to gadget start (w/o lock held) to execute the remove requests, which will unlock the dwc3 spinlock as part of giveback. To mitigate this, resolve the pending endxfers on the pullup disable path by re-locating the SETUP phase check after stop active transfers, since that is where the DWC3_EP_DELAY_STOP is potentially set. This also allows for handling of a host that may be unresponsive by using the completion timeout to trigger the stall and restart for EP0. Fixes: c96683798e27 ("usb: dwc3: ep0: Don't prepare beyond Setup stage") Cc: stable@vger.kernel.org Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20230413195742.11821-2-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11usb: gadget: udc: core: Prevent redundant calls to pullupBadhri Jagan Sridharan
commit a3afbf5cc887fc3401f012fe629810998ed61859 upstream. usb_gadget_connect calls gadget->ops->pullup without checking whether gadget->connected was previously set. Make this symmetric to usb_gadget_disconnect by returning early if gadget->connected is already set. Fixes: 5a1da544e572 ("usb: gadget: core: do not try to disconnect gadget if it is not connected") Cc: stable@vger.kernel.org Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20230407030741.3163220-2-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11usb: gadget: udc: core: Invoke usb_gadget_connect only when startedBadhri Jagan Sridharan
commit 0db213ea8eed5534a5169e807f28103cbc9d23df upstream. usb_udc_connect_control does not check to see if the udc has already been started. This causes gadget->ops->pullup to be called through usb_gadget_connect when invoked from usb_udc_vbus_handler even before usb_gadget_udc_start is called. Guard this by checking for udc->started in usb_udc_connect_control before invoking usb_gadget_connect. Guarding udc->vbus, udc->started, gadget->connect, gadget->deactivate related functions with connect_lock. usb_gadget_connect_locked, usb_gadget_disconnect_locked, usb_udc_connect_control_locked, usb_gadget_udc_start_locked, usb_gadget_udc_stop_locked are called with this lock held as they can be simulataneously invoked from different code paths. Adding an additional check to make sure udc is started(udc->started) before pullup callback is invoked. Fixes: 628ef0d273a6 ("usb: udc: add usb_udc_vbus_handler") Cc: stable@vger.kernel.org Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20230407030741.3163220-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-01USB: serial: option: add UNISOC vendor and TOZED LT70C productArınç ÜNAL
commit a095edfc15f0832e046ae23964e249ef5c95af87 upstream. Add UNISOC vendor ID and TOZED LT70-C modem which is based from UNISOC SL8563. The modem supports the NCM mode. Interface 0 is used for running the AT commands. Interface 12 is the ADB interface. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4055 Rev=04.04 S: Manufacturer=Unisoc Phone S: Product=Unisoc Phone S: SerialNumber=<redacted> C: #Ifs=14 Cfg#= 1 Atr=c0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#=10 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#=11 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#=12 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#=13 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=84(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=88(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 7 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230417152003.243248-1-arinc.unal@arinc9.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-05usb: cdnsp: Fixes error: uninitialized symbol 'len'Pawel Laszczak
The patch 5bc38d33a5a1: "usb: cdnsp: Fixes issue with redundant Status Stage" leads to the following Smatch static checker warning: drivers/usb/cdns3/cdnsp-ep0.c:470 cdnsp_setup_analyze() error: uninitialized symbol 'len'. cc: <stable@vger.kernel.org> Fixes: 5bc38d33a5a1 ("usb: cdnsp: Fixes issue with redundant Status Stage") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20230331090600.454674-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-05usb: gadgetfs: Fix ep_read_iter to handle ITER_UBUFSandeep Dhavale
iov_iter for ep_read_iter can be ITER_UBUF with io_uring. In that case dup_iter() does not have to allocate iov and it can return NULL. Fix the assumption by checking for iter_is_ubuf() other wise ep_read_iter can treat this as failure and return -ENOMEM. Fixes: 1e23db450cff ("io_uring: use iter_ubuf for single range imports") Signed-off-by: Sandeep Dhavale <dhavale@google.com> Acked-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/20230401060509.3608259-3-dhavale@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-05usb: gadget: f_fs: Fix ffs_epfile_read_iter to handle ITER_UBUFSandeep Dhavale
iov_iter for ffs_epfile_read_iter can be ITER_UBUF with io_uring. In that case dup_iter() does not have to allocate anything and it can return NULL. ffs_epfile_read_iter treats this as a failure and returns -ENOMEM. Fix it by checking if iter_is_ubuf(). Fixes: 1e23db450cff ("io_uring: use iter_ubuf for single range imports") Signed-off-by: Sandeep Dhavale <dhavale@google.com> Acked-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/20230401060509.3608259-2-dhavale@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.51.0) at 2026-10-15 23:28:43 +0000