summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2023-05-17usb: dwc3: gadget: Execute gadget stop after halting the controllerWesley Cheng
[ Upstream commit 39674be56fba1cd3a03bf4617f523a35f85fd2c1 ] Do not call gadget stop until the poll for controller halt is completed. DEVTEN is cleared as part of gadget stop, so the intention to allow ep0 events to continue while waiting for controller halt is not happening. Fixes: c96683798e27 ("usb: dwc3: ep0: Don't prepare beyond Setup stage") Cc: stable@vger.kernel.org Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20230420212759.29429-2-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-17USB: dwc3: gadget: drop dead hibernation codeJohan Hovold
[ Upstream commit bdb19d01026a5cccfa437be8adcf2df472c5889e ] The hibernation code is broken and has never been enabled in mainline and should thus be dropped. Remove the hibernation bits from the gadget code, which effectively reverts commits e1dadd3b0f27 ("usb: dwc3: workaround: bogus hibernation events") and 7b2a0368bbc9 ("usb: dwc3: gadget: set KEEP_CONNECT in case of hibernation") except for the spurious interrupt warning. Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230404072524.19014-5-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 39674be56fba ("usb: dwc3: gadget: Execute gadget stop after halting the controller") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11usb: mtu3: fix kernel panic at qmu transfer done irq handlerChunfeng Yun
[ Upstream commit d28f4091ea7ec3510fd6a3c6d433234e7a2bef14 ] When handle qmu transfer irq, it will unlock @mtu->lock before give back request, if another thread handle disconnect event at the same time, and try to disable ep, it may lock @mtu->lock and free qmu ring, then qmu irq hanlder may get a NULL gpd, avoid the KE by checking gpd's value before handling it. e.g. qmu done irq on cpu0 thread running on cpu1 qmu_done_tx() handle gpd [0] mtu3_requ_complete() mtu3_gadget_ep_disable() unlock @mtu->lock give back request lock @mtu->lock mtu3_ep_disable() mtu3_gpd_ring_free() unlock @mtu->lock lock @mtu->lock get next gpd [1] [1]: goto [0] to handle next gpd, and next gpd may be NULL. Fixes: 48e0d3735aa5 ("usb: mtu3: supports new QMU format") Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20230417025203.18097-3-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11usb: chipidea: fix missing goto in `ci_hdrc_probe`Yinhao Hu
[ Upstream commit d6f712f53b79f5017cdcefafb7a5aea9ec52da5d ] From the comment of ci_usb_phy_init, it returns an error code if usb_phy_init has failed, and it should do some clean up, not just return directly. Fix this by goto the error handling. Fixes: 74475ede784d ("usb: chipidea: move PHY operation to core") Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Yinhao Hu <dddddd@hust.edu.cn> Link: https://lore.kernel.org/r/20230412055852.971991-1-dddddd@hust.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11usb: gadget: tegra-xudc: Fix crash in vbus_drawJon Hunter
[ Upstream commit 5629d31955297ca47b9283c64fff70f2f34aa528 ] Commit ac82b56bda5f ("usb: gadget: tegra-xudc: Add vbus_draw support") populated the vbus_draw callback for the Tegra XUDC driver. The function tegra_xudc_gadget_vbus_draw(), that was added by this commit, assumes that the pointer 'curr_usbphy' has been initialised, which is not always the case because this is only initialised when the USB role is updated. Fix this crash, by checking that the 'curr_usbphy' is valid before dereferencing. Fixes: ac82b56bda5f ("usb: gadget: tegra-xudc: Add vbus_draw support") Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20230405181854.42355-1-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11usb: gadget: udc: renesas_usb3: Fix use after free bug in ↵Zheng Wang
renesas_usb3_remove due to race condition [ Upstream commit 2b947f8769be8b8181dc795fd292d3e7120f5204 ] In renesas_usb3_probe, role_work is bound with renesas_usb3_role_work. renesas_usb3_start will be called to start the work. If we remove the driver which will call usbhs_remove, there may be an unfinished work. The possible sequence is as follows: CPU0 CPU1 renesas_usb3_role_work renesas_usb3_remove usb_role_switch_unregister device_unregister kfree(sw) //free usb3->role_sw usb_role_switch_set_role //use usb3->role_sw The usb3->role_sw could be freed under such circumstance and then used in usb_role_switch_set_role. This bug was found by static analysis. And note that removing a driver is a root-only operation, and should never happen in normal case. But the root user may directly remove the device which will also trigger the remove function. Fix it by canceling the work before cleanup in the renesas_usb3_remove. Fixes: 39facfa01c9f ("usb: gadget: udc: renesas_usb3: Add register of usb role switch") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20230320062931.505170-1-zyytlz.wz@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11usb: dwc3: gadget: Change condition for processing suspend eventPrashanth K
[ Upstream commit 4decf4060ecfee1f7a710999fcd421645ac0c419 ] Currently we process the suspend interrupt event only if the device is in configured state. Consider a case where device is not configured and got suspend interrupt, in that case our gadget will still use 100mA as composite_suspend didn't happen. But battery charging specification (BC1.2) expects a downstream device to draw less than 2.5mA when unconnected OR suspended. Fix this by removing the condition for processing suspend event, and thus composite_resume would set vbus draw to 2. Fixes: 72704f876f50 ("dwc3: gadget: Implement the suspend entry event handler") Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/1677217619-10261-2-git-send-email-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11usb: host: xhci-rcar: remove leftover quirk handlingWolfram Sang
[ Upstream commit 5d67f4861884762ebc2bddb5d667444e45f25782 ] Loading V3 firmware does not need a quirk anymore, remove the leftover code. Fixes: ed8603e11124 ("usb: host: xhci-rcar: Simplify getting the firmware name for R-Car Gen3") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20230307163041.3815-10-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11scsi: target: Pass in cmd counter to use during cmd setupMike Christie
[ Upstream commit 8e288be8606ad87c1726618eacfb8fbd3ab4b806 ] Allow target_get_sess_cmd() users to pass in the cmd counter they want to use. Right now we pass in the session's cmd counter but in a subsequent commit iSCSI will switch from per session to per conn. Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20230319015620.96006-4-michael.christie@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Stable-dep-of: 395cee83d02d ("scsi: target: iscsit: Stop/wait on cmds during conn close") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11xhci: fix debugfs register accesses while suspendedJohan Hovold
commit 735baf1b23458f71a8b15cb924af22c9ff9cd125 upstream. Wire up the debugfs regset device pointer so that the controller is resumed before accessing registers to avoid crashing or locking up if it happens to be runtime suspended. Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver") Cc: stable@vger.kernel.org # 4.15: 30332eeefec8: debugfs: regset32: Add Runtime PM support Cc: stable@vger.kernel.org # 4.15 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230405090342.7363-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11USB: dwc3: fix runtime pm imbalance on unbindJohan Hovold
commit 44d257e9012ee8040e41d224d0e5bfb5ef5427ea upstream. Make sure to balance the runtime PM usage count on driver unbind by adding back the pm_runtime_allow() call that had been erroneously removed. Fixes: 266d0493900a ("usb: dwc3: core: don't trigger runtime pm when remove driver") Cc: stable@vger.kernel.org # 5.9 Cc: Li Jun <jun.li@nxp.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230404072524.19014-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11USB: dwc3: fix runtime pm imbalance on probe errorsJohan Hovold
commit 9a8ad10c9f2e0925ff26308ec6756b93fc2f4977 upstream. Make sure not to suspend the device when probe fails to avoid disabling clocks and phys multiple times. Fixes: 328082376aea ("usb: dwc3: fix runtime PM in error path") Cc: stable@vger.kernel.org # 4.8 Cc: Roger Quadros <rogerq@ti.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230404072524.19014-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11usb: dwc3: gadget: Stall and restart EP0 if host is unresponsiveWesley Cheng
commit 02435a739b81ae24aff5d6e930efef9458e2af3c upstream. It was observed that there are hosts that may complete pending SETUP transactions before the stop active transfers and controller halt occurs, leading to lingering endxfer commands on DEPs on subsequent pullup/gadget start iterations. dwc3_gadget_ep_disable name=ep8in flags=0x3009 direction=1 dwc3_gadget_ep_disable name=ep4in flags=1 direction=1 dwc3_gadget_ep_disable name=ep3out flags=1 direction=0 usb_gadget_disconnect deactivated=0 connected=0 ret=0 The sequence shows that the USB gadget disconnect (dwc3_gadget_pullup(0)) routine completed successfully, allowing for the USB gadget to proceed with a USB gadget connect. However, if this occurs the system runs into an issue where: BUG: spinlock already unlocked on CPU spin_bug+0x0 dwc3_remove_requests+0x278 dwc3_ep0_out_start+0xb0 __dwc3_gadget_start+0x25c This is due to the pending endxfers, leading to gadget start (w/o lock held) to execute the remove requests, which will unlock the dwc3 spinlock as part of giveback. To mitigate this, resolve the pending endxfers on the pullup disable path by re-locating the SETUP phase check after stop active transfers, since that is where the DWC3_EP_DELAY_STOP is potentially set. This also allows for handling of a host that may be unresponsive by using the completion timeout to trigger the stall and restart for EP0. Fixes: c96683798e27 ("usb: dwc3: ep0: Don't prepare beyond Setup stage") Cc: stable@vger.kernel.org Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20230413195742.11821-2-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11usb: gadget: udc: core: Prevent redundant calls to pullupBadhri Jagan Sridharan
commit a3afbf5cc887fc3401f012fe629810998ed61859 upstream. usb_gadget_connect calls gadget->ops->pullup without checking whether gadget->connected was previously set. Make this symmetric to usb_gadget_disconnect by returning early if gadget->connected is already set. Fixes: 5a1da544e572 ("usb: gadget: core: do not try to disconnect gadget if it is not connected") Cc: stable@vger.kernel.org Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20230407030741.3163220-2-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11usb: gadget: udc: core: Invoke usb_gadget_connect only when startedBadhri Jagan Sridharan
commit 0db213ea8eed5534a5169e807f28103cbc9d23df upstream. usb_udc_connect_control does not check to see if the udc has already been started. This causes gadget->ops->pullup to be called through usb_gadget_connect when invoked from usb_udc_vbus_handler even before usb_gadget_udc_start is called. Guard this by checking for udc->started in usb_udc_connect_control before invoking usb_gadget_connect. Guarding udc->vbus, udc->started, gadget->connect, gadget->deactivate related functions with connect_lock. usb_gadget_connect_locked, usb_gadget_disconnect_locked, usb_udc_connect_control_locked, usb_gadget_udc_start_locked, usb_gadget_udc_stop_locked are called with this lock held as they can be simulataneously invoked from different code paths. Adding an additional check to make sure udc is started(udc->started) before pullup callback is invoked. Fixes: 628ef0d273a6 ("usb: udc: add usb_udc_vbus_handler") Cc: stable@vger.kernel.org Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20230407030741.3163220-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-01USB: serial: option: add UNISOC vendor and TOZED LT70C productArınç ÜNAL
commit a095edfc15f0832e046ae23964e249ef5c95af87 upstream. Add UNISOC vendor ID and TOZED LT70-C modem which is based from UNISOC SL8563. The modem supports the NCM mode. Interface 0 is used for running the AT commands. Interface 12 is the ADB interface. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4055 Rev=04.04 S: Manufacturer=Unisoc Phone S: Product=Unisoc Phone S: SerialNumber=<redacted> C: #Ifs=14 Cfg#= 1 Atr=c0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#=10 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#=11 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#=12 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#=13 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=84(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=88(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 7 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230417152003.243248-1-arinc.unal@arinc9.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-13USB: serial: option: add Quectel RM500U-CN modemBjørn Mork
commit 7708a3858e69db91a8b69487994f33b96d20192a upstream. This modem supports several modes with a class network function and a number of serial functions, all using ff/00/00 The device ID is the same in all modes. RNDIS mode ---------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0900 Rev= 4.04 S: Manufacturer=Quectel S: Product=RM500U-CN S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03 I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms ECM mode -------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0900 Rev= 4.04 S: Manufacturer=Quectel S: Product=RM500U-CN S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms NCM mode -------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0900 Rev= 4.04 S: Manufacturer=Quectel S: Product=RM500U-CN S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=c0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0d Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Reported-by: Andrew Green <askgreen@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-13USB: serial: option: add Telit FE990 compositionsEnrico Sau
commit 773e8e7d07b753474b2ccd605ff092faaa9e65b9 upstream. Add the following Telit FE990 compositions: 0x1080: tty, adb, rmnet, tty, tty, tty, tty 0x1081: tty, adb, mbim, tty, tty, tty, tty 0x1082: rndis, tty, adb, tty, tty, tty, tty 0x1083: tty, adb, ecm, tty, tty, tty, tty Signed-off-by: Enrico Sau <enrico.sau@gmail.com> Link: https://lore.kernel.org/r/20230314090059.77876-1-enrico.sau@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-13usb: typec: altmodes/displayport: Fix configure initial pin assignmentRD Babiera
commit eddebe39602efe631b83ff8d03f26eba12cfd760 upstream. While determining the initial pin assignment to be sent in the configure message, using the DP_PIN_ASSIGN_DP_ONLY_MASK mask causes the DFP_U to send both Pin Assignment C and E when both are supported by the DFP_U and UFP_U. The spec (Table 5-7 DFP_U Pin Assignment Selection Mandates, VESA DisplayPort Alt Mode Standard v2.0) indicates that the DFP_U never selects Pin Assignment E when Pin Assignment C is offered. Update the DP_PIN_ASSIGN_DP_ONLY_MASK conditional to intially select only Pin Assignment C if it is available. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230329215159.2046932-1-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-13USB: serial: cp210x: add Silicon Labs IFS-USB-DATACABLE IDsKees Jan Koster
commit 71f8afa2b66e356f435b6141b4a9ccf953e18356 upstream. The Silicon Labs IFS-USB-DATACABLE is used in conjunction with for example the Quint UPSes. It is used to enable Modbus communication with the UPS to query configuration, power and battery status. Signed-off-by: Kees Jan Koster <kjkoster@kjkoster.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-13usb: dwc3: pci: add support for the Intel Meteor Lake-SHeikki Krogerus
commit ec799c8a92e0be91e0940cc739a27f483242df65 upstream. This patch adds the necessary PCI ID for Intel Meteor Lake-S devices. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230330150224.89316-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-13usb: cdnsp: Fixes error: uninitialized symbol 'len'Pawel Laszczak
commit 1edf48991a783d00a3a18dc0d27c88139e4030a2 upstream. The patch 5bc38d33a5a1: "usb: cdnsp: Fixes issue with redundant Status Stage" leads to the following Smatch static checker warning: drivers/usb/cdns3/cdnsp-ep0.c:470 cdnsp_setup_analyze() error: uninitialized symbol 'len'. cc: <stable@vger.kernel.org> Fixes: 5bc38d33a5a1 ("usb: cdnsp: Fixes issue with redundant Status Stage") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20230331090600.454674-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-13xhci: also avoid the XHCI_ZERO_64B_REGS quirk with a passthrough iommuD Scott Phillips
commit ecaa4902439298f6b0e29f47424a86b310a9ff4f upstream. Previously the quirk was skipped when no iommu was present. The same rationale for skipping the quirk also applies in the iommu.passthrough=1 case. Skip applying the XHCI_ZERO_64B_REGS quirk if the device's iommu domain is passthrough. Fixes: 12de0a35c996 ("xhci: Add quirk to zero 64bit registers on Renesas PCIe controllers") Cc: stable <stable@kernel.org> Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230330143056.1390020-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-13xhci: Free the command allocated for setting LPM if we return earlyMathias Nyman
commit f6caea4855553a8b99ba3ec23ecdb5ed8262f26c upstream. The command allocated to set exit latency LPM values need to be freed in case the command is never queued. This would be the case if there is no change in exit latency values, or device is missing. Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Link: https://lore.kernel.org/linux-usb/24263902-c9b3-ce29-237b-1c3d6918f4fe@alu.unizg.hr Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Fixes: 5c2a380a5aa8 ("xhci: Allocate separate command structures for each LPM command") Cc: <Stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230330143056.1390020-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-13usb: xhci: tegra: fix sleep in atomic callWayne Chang
commit 4c7f9d2e413dc06a157c4e5dccde84aaf4655eb3 upstream. When we set the dual-role port to Host mode, we observed the following splat: [ 167.057718] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:229 [ 167.057872] Workqueue: events tegra_xusb_usb_phy_work [ 167.057954] Call trace: [ 167.057962] dump_backtrace+0x0/0x210 [ 167.057996] show_stack+0x30/0x50 [ 167.058020] dump_stack_lvl+0x64/0x84 [ 167.058065] dump_stack+0x14/0x34 [ 167.058100] __might_resched+0x144/0x180 [ 167.058140] __might_sleep+0x64/0xd0 [ 167.058171] slab_pre_alloc_hook.constprop.0+0xa8/0x110 [ 167.058202] __kmalloc_track_caller+0x74/0x2b0 [ 167.058233] kvasprintf+0xa4/0x190 [ 167.058261] kasprintf+0x58/0x90 [ 167.058285] tegra_xusb_find_port_node.isra.0+0x58/0xd0 [ 167.058334] tegra_xusb_find_port+0x38/0xa0 [ 167.058380] tegra_xusb_padctl_get_usb3_companion+0x38/0xd0 [ 167.058430] tegra_xhci_id_notify+0x8c/0x1e0 [ 167.058473] notifier_call_chain+0x88/0x100 [ 167.058506] atomic_notifier_call_chain+0x44/0x70 [ 167.058537] tegra_xusb_usb_phy_work+0x60/0xd0 [ 167.058581] process_one_work+0x1dc/0x4c0 [ 167.058618] worker_thread+0x54/0x410 [ 167.058650] kthread+0x188/0x1b0 [ 167.058672] ret_from_fork+0x10/0x20 The function tegra_xusb_padctl_get_usb3_companion eventually calls tegra_xusb_find_port and this in turn calls kasprintf which might sleep and so cannot be called from an atomic context. Fix this by moving the call to tegra_xusb_padctl_get_usb3_companion to the tegra_xhci_id_work function where it is really needed. Fixes: f836e7843036 ("usb: xhci-tegra: Add OTG support") Cc: stable@vger.kernel.org Signed-off-by: Wayne Chang <waynec@nvidia.com> Signed-off-by: Haotien Hsu <haotienh@nvidia.com> Link: https://lore.kernel.org/r/20230327095548.1599470-1-haotienh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-13Revert "usb: xhci-pci: Set PROBE_PREFER_ASYNCHRONOUS"Mathias Nyman
commit 8e77d3d59d7b5da13deda1d832c51b8bbdbe2037 upstream. This reverts commit 4c2604a9a6899bab195edbee35fc8d64ce1444aa. Asynch probe caused regression in a setup with both Renesas and Intel xHC controllers. Devices connected to the Renesas disconnected shortly after boot. With Asynch probe the busnumbers got interleaved. xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2 xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 Reason why this commit causes regression is still unknown, but revert it while debugging the issue. Fixes: 4c2604a9a689 ("usb: xhci-pci: Set PROBE_PREFER_ASYNCHRONOUS") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/linux-usb/20230307132120.5897c5af@deangelis.fenrir.org.uk Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230330143056.1390020-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-06usb: ucsi: Fix ucsi->connector raceHans de Goede
commit 0482c34ec6f8557e06cd0f8e2d0e20e8ede6a22c upstream. ucsi_init() which runs from a workqueue sets ucsi->connector and on an error will clear it again. ucsi->connector gets dereferenced by ucsi_resume(), this checks for ucsi->connector being NULL in case ucsi_init() has not finished yet; or in case ucsi_init() has failed. ucsi_init() setting ucsi->connector and then clearing it again on an error creates a race where the check in ucsi_resume() may pass, only to have ucsi->connector free-ed underneath it when ucsi_init() hits an error. Fix this race by making ucsi_init() store the connector array in a local variable and only assign it to ucsi->connector on success. Fixes: bdc62f2bae8f ("usb: typec: ucsi: Simplified registration and I/O API") Cc: stable@vger.kernel.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230308154244.722337-3-hdegoede@redhat.com Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30usb: ucsi_acpi: Increase the command completion timeoutHans de Goede
commit 02d210f434249a7edbc160969b75df030dc6934d upstream. Commit 130a96d698d7 ("usb: typec: ucsi: acpi: Increase command completion timeout value") increased the timeout from 5 seconds to 60 seconds due to issues related to alternate mode discovery. After the alternate mode discovery switch to polled mode the timeout was reduced, but instead of being set back to 5 seconds it was reduced to 1 second. This is causing problems when using a Lenovo ThinkPad X1 yoga gen7 connected over Type-C to a LG 27UL850-W (charging DP over Type-C). When the monitor is already connected at boot the following error is logged: "PPM init failed (-110)", /sys/class/typec is empty and on unplugging the NULL pointer deref fixed earlier in this series happens. When the monitor is connected after boot the following error is logged instead: "GET_CONNECTOR_STATUS failed (-110)". Setting the timeout back to 5 seconds fixes both cases. Fixes: e08065069fc7 ("usb: typec: ucsi: acpi: Reduce the command completion timeout") Cc: stable@vger.kernel.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230308154244.722337-4-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30usb: ucsi: Fix NULL pointer deref in ucsi_connector_change()Hans de Goede
commit f87fb985452ab2083967103ac00bfd68fb182764 upstream. When ucsi_init() fails, ucsi->connector is NULL, yet in case of ucsi_acpi we may still get events which cause the ucs_acpi code to call ucsi_connector_change(), which then derefs the NULL ucsi->connector pointer. Fix this by not setting ucsi->ntfy inside ucsi_init() until ucsi_init() has succeeded, so that ucsi_connector_change() ignores the events because UCSI_ENABLE_NTFY_CONNECTOR_CHANGE is not set in the ntfy mask. Fixes: bdc62f2bae8f ("usb: typec: ucsi: Simplified registration and I/O API") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217106 Cc: stable@vger.kernel.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230308154244.722337-2-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30usb: dwc3: gadget: Add 1ms delay after end transfer command without IOCWesley Cheng
commit d8a2bb4eb75866275b5cf7de2e593ac3449643e2 upstream. Previously, there was a 100uS delay inserted after issuing an end transfer command for specific controller revisions. This was due to the fact that there was a GUCTL2 bit field which enabled synchronous completion of the end transfer command once the CMDACT bit was cleared in the DEPCMD register. Since this bit does not exist for all controller revisions and the current implementation heavily relies on utizling the EndTransfer command completion interrupt, add the delay back in for uses where the interrupt on completion bit is not set, and increase the duration to 1ms for the controller to complete the command. An issue was seen where the USB request buffer was unmapped while the DWC3 controller was still accessing the TRB. However, it was confirmed that the end transfer command was successfully submitted. (no end transfer timeout) In situations, such as dwc3_gadget_soft_disconnect() and __dwc3_gadget_ep_disable(), the dwc3_remove_request() is utilized, which will issue the end transfer command, and follow up with dwc3_gadget_giveback(). At least for the USB ep disable path, it is required for any pending and started requests to be completed and returned to the function driver in the same context of the disable call. Without the GUCTL2 bit, it is not ensured that the end transfer is completed before the buffers are unmapped. Fixes: cf2f8b63f7f1 ("usb: dwc3: gadget: Remove END_TRANSFER delay") Cc: stable <stable@kernel.org> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20230306200557.29387-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30usb: chipidea: core: fix possible concurrent when switch roleXu Yang
commit 451b15ed138ec15bffbebb58a00ebdd884c3e659 upstream. The user may call role_store() when driver is handling ci_handle_id_switch() which is triggerred by otg event or power lost event. Unfortunately, the controller may go into chaos in this case. Fix this by protecting it with mutex lock. Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20230317061516.2451728-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30usb: chipdea: core: fix return -EINVAL if request role is the same with ↵Xu Yang
current role commit 3670de80678961eda7fa2220883fc77c16868951 upstream. It should not return -EINVAL if the request role is the same with current role, return non-error and without do anything instead. Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20230317061516.2451728-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30usb: cdnsp: changes PCI Device ID to fix conflict with CNDS3 driverPawel Laszczak
commit 96b96b2a567fb34dd41c87e6cf01f6902ce8cae4 upstream. Patch changes CDNS_DEVICE_ID in USBSSP PCI Glue driver to remove the conflict with Cadence USBSS driver. cc: <stable@vger.kernel.org> Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20230309063048.299378-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30usb: cdnsp: Fixes issue with redundant Status StagePawel Laszczak
commit 5bc38d33a5a1209fd4de65101d1ae8255ea12c6e upstream. In some cases, driver trees to send Status Stage twice. The first one from upper layer of gadget usb subsystem and second time from controller driver. This patch fixes this issue and remove tricky handling of SET_INTERFACE from controller driver which is no longer needed. cc: <stable@vger.kernel.org> Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20230307111420.376056-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30usb: cdns3: Fix issue with using incorrect PCI device functionPawel Laszczak
commit 1272fd652a226ccb34e9f47371b6121948048438 upstream. PCI based platform can have more than two PCI functions. USBSS PCI Glue driver during initialization should consider only DRD/HOST/DEVICE PCI functions and all other should be ignored. This patch adds additional condition which causes that only DRD and HOST/DEVICE function will be accepted. cc: <stable@vger.kernel.org> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20230308124427.311245-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30usb: typec: tcpm: fix warning when handle discover_identity messageXu Yang
commit abfc4fa28f0160df61c7149567da4f6494dfb488 upstream. Since both source and sink device can send discover_identity message in PD3, kernel may dump below warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 169 at drivers/usb/typec/tcpm/tcpm.c:1446 tcpm_queue_vdm+0xe0/0xf0 Modules linked in: CPU: 0 PID: 169 Comm: 1-0050 Not tainted 6.1.1-00038-g6a3c36cf1da2-dirty #567 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : tcpm_queue_vdm+0xe0/0xf0 lr : tcpm_queue_vdm+0x2c/0xf0 sp : ffff80000c19bcd0 x29: ffff80000c19bcd0 x28: 0000000000000001 x27: ffff0000d11c8ab8 x26: ffff0000d11cc000 x25: 0000000000000000 x24: 00000000ff008081 x23: 0000000000000001 x22: 00000000ff00a081 x21: ffff80000c19bdbc x20: 0000000000000000 x19: ffff0000d11c8080 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff0000d716f580 x14: 0000000000000001 x13: ffff0000d716f507 x12: 0000000000000001 x11: 0000000000000000 x10: 0000000000000020 x9 : 00000000000ee098 x8 : 00000000ffffffff x7 : 000000000000001c x6 : ffff0000d716f580 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff80000c19bdbc x1 : 00000000ff00a081 x0 : 0000000000000004 Call trace: tcpm_queue_vdm+0xe0/0xf0 tcpm_pd_rx_handler+0x340/0x1ab0 kthread_worker_fn+0xcc/0x18c kthread+0x10c/0x110 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- Below sequences may trigger this warning: tcpm_send_discover_work(work) tcpm_send_vdm(port, USB_SID_PD, CMD_DISCOVER_IDENT, NULL, 0); tcpm_queue_vdm(port, header, data, count); port->vdm_state = VDM_STATE_READY; vdm_state_machine_work(work); <-- received discover_identity from partner vdm_run_state_machine(port); port->vdm_state = VDM_STATE_SEND_MESSAGE; mod_vdm_delayed_work(port, x); tcpm_pd_rx_handler(work); tcpm_pd_data_request(port, msg); tcpm_handle_vdm_request(port, msg->payload, cnt); tcpm_queue_vdm(port, response[0], &response[1], rlen - 1); --> WARN_ON(port->vdm_state > VDM_STATE_DONE); For this case, the state machine could still send out discover identity message later if we skip current discover_identity message. So we should handle the received message firstly and override the pending discover_identity message without warning in this case. Then, a delayed send_discover work will send discover_identity message again. Fixes: e00943e91678 ("usb: typec: tcpm: PD3.0 sinks can send Discover Identity even in device mode") cc: <stable@vger.kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230216031515.4151117-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30usb: typec: tcpm: fix create duplicate source-capabilities fileXu Yang
commit a826492fc9dfe32afd70fff93955ae8174bbf14b upstream. The kernel will dump in the below cases: sysfs: cannot create duplicate filename '/devices/virtual/usb_power_delivery/pd1/source-capabilities' 1. After soft reset has completed, an Explicit Contract negotiation occurs. The sink device will receive source capabilitys again. This will cause a duplicate source-capabilities file be created. 2. Power swap twice on a device that is initailly sink role. This will unregister existing capabilities when above cases occurs. Fixes: 8203d26905ee ("usb: typec: tcpm: Register USB Power Delivery Capabilities") cc: <stable@vger.kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230215054951.238394-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30usb: gadget: u_audio: don't let userspace block driver unbindAlvin Šipraga
commit 6c67ed9ad9b83e453e808f9b31a931a20a25629b upstream. In the unbind callback for f_uac1 and f_uac2, a call to snd_card_free() via g_audio_cleanup() will disconnect the card and then wait for all resources to be released, which happens when the refcount falls to zero. Since userspace can keep the refcount incremented by not closing the relevant file descriptor, the call to unbind may block indefinitely. This can cause a deadlock during reboot, as evidenced by the following blocked task observed on my machine: task:reboot state:D stack:0 pid:2827 ppid:569 flags:0x0000000c Call trace: __switch_to+0xc8/0x140 __schedule+0x2f0/0x7c0 schedule+0x60/0xd0 schedule_timeout+0x180/0x1d4 wait_for_completion+0x78/0x180 snd_card_free+0x90/0xa0 g_audio_cleanup+0x2c/0x64 afunc_unbind+0x28/0x60 ... kernel_restart+0x4c/0xac __do_sys_reboot+0xcc/0x1ec __arm64_sys_reboot+0x28/0x30 invoke_syscall+0x4c/0x110 ... The issue can also be observed by opening the card with arecord and then stopping the process through the shell before unbinding: # arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null Recording WAVE '/dev/null' : Signed 32 bit Little Endian, Rate 48000 Hz, Stereo ^Z[1]+ Stopped arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null # echo gadget.0 > /sys/bus/gadget/drivers/configfs-gadget/unbind (observe that the unbind command never finishes) Fix the problem by using snd_card_free_when_closed() instead, which will still disconnect the card as desired, but defer the task of freeing the resources to the core once userspace closes its file descriptor. Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver") Cc: stable@vger.kernel.org Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Reviewed-by: John Keeping <john@metanate.com> Link: https://lore.kernel.org/r/20230302163648.3349669-1-alvin@pqrs.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30usb: dwc2: fix a devres leak in hw_enable upon suspend resumeFabrice Gasnier
commit f747313249b74f323ddf841a9c8db14d989f296a upstream. Each time the platform goes to low power, PM suspend / resume routines call: __dwc2_lowlevel_hw_enable -> devm_add_action_or_reset(). This adds a new devres each time. This may also happen at runtime, as dwc2_lowlevel_hw_enable() can be called from udc_start(). This can be seen with tracing: - echo 1 > /sys/kernel/debug/tracing/events/dev/devres_log/enable - go to low power - cat /sys/kernel/debug/tracing/trace A new "ADD" entry is found upon each low power cycle: ... devres_log: 49000000.usb-otg ADD 82a13bba devm_action_release (8 bytes) ... devres_log: 49000000.usb-otg ADD 49889daf devm_action_release (8 bytes) ... A second issue is addressed here: - regulator_bulk_enable() is called upon each PM cycle (suspend/resume). - regulator_bulk_disable() never gets called. So the reference count for these regulators constantly increase, by one upon each low power cycle, due to missing regulator_bulk_disable() call in __dwc2_lowlevel_hw_disable(). The original fix that introduced the devm_add_action_or_reset() call, fixed an issue during probe, that happens due to other errors in dwc2_driver_probe() -> dwc2_core_reset(). Then the probe fails without disabling regulators, when dr_mode == USB_DR_MODE_PERIPHERAL. Rather fix the error path: disable all the low level hardware in the error path, by using the "hsotg->ll_hw_enabled" flag. Checking dr_mode has been introduced to avoid a dual call to dwc2_lowlevel_hw_disable(). "ll_hw_enabled" should achieve the same (and is used currently in the remove() routine). Fixes: 54c196060510 ("usb: dwc2: Always disable regulators on driver teardown") Fixes: 33a06f1300a7 ("usb: dwc2: Fix error path in gadget registration") Cc: stable <stable@kernel.org> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20230316084127.126084-1-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30usb: dwc2: drd: fix inconsistent mode if role-switch-default-mode="host"Ziyang Huang
commit 82f5332d3b9872ab5b287e85c57b76d8bb640cd1 upstream. Some boards might use USB-A female connector for USB ports, however, the port could be connected to a dual-mode USB controller, making it also behaves as a peripheral device if male-to-male cable is connected. In this case, the dts looks like this: &usb0 { status = "okay"; dr_mode = "otg"; usb-role-switch; role-switch-default-mode = "host"; }; After boot, dwc2_ovr_init() sets GOTGCTL to GOTGCTL_AVALOVAL and call dwc2_force_mode() with parameter host=false, which causes inconsistent mode - The hardware is in peripheral mode while the kernel status is in host mode. What we can do now is to call dwc2_drd_role_sw_set() to switch to device mode, and everything should work just fine now, even switching back to none(default) mode afterwards. Fixes: e14acb876985 ("usb: dwc2: drd: add role-switch-default-node support") Cc: stable <stable@kernel.org> Signed-off-by: Ziyang Huang <hzyitc@outlook.com> Tested-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/SG2PR01MB204837BF68EDB0E343D2A375C9A59@SG2PR01MB2048.apcprd01.prod.exchangelabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30usb: dwc2: fix a race, don't power off/on phy for dual-role modeFabrice Gasnier
commit 5021383242ada277a38bd052a4c12ed4707faccb upstream. When in dual role mode (dr_mode == USB_DR_MODE_OTG), platform probe successively basically calls: - dwc2_gadget_init() - dwc2_hcd_init() - dwc2_lowlevel_hw_disable() since recent change [1] - usb_add_gadget_udc() The PHYs (and so the clocks it may provide) shouldn't be disabled for all SoCs, in OTG mode, as the HCD part has been initialized. On STM32 this creates some weird race condition upon boot, when: - initially attached as a device, to a HOST - and there is a gadget script invoked to setup the device part. Below issue becomes systematic, as long as the gadget script isn't started by userland: the hardware PHYs (and so the clocks provided by the PHYs) remains disabled. It ends up in having an endless interrupt storm, before the watchdog resets the platform. [ 16.924163] dwc2 49000000.usb-otg: EPs: 9, dedicated fifos, 952 entries in SPRAM [ 16.962704] dwc2 49000000.usb-otg: DWC OTG Controller [ 16.966488] dwc2 49000000.usb-otg: new USB bus registered, assigned bus number 2 [ 16.974051] dwc2 49000000.usb-otg: irq 77, io mem 0x49000000 [ 17.032170] hub 2-0:1.0: USB hub found [ 17.042299] hub 2-0:1.0: 1 port detected [ 17.175408] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode [ 17.181741] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode [ 17.189303] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode ... The host part is also not functional, until the gadget part is configured. The HW may only be disabled for peripheral mode (original init), e.g. dr_mode == USB_DR_MODE_PERIPHERAL, until the gadget driver initializes. But when in USB_DR_MODE_OTG, the HW should remain enabled, as the HCD part is able to run, while the gadget part isn't necessarily configured. I don't fully get the of purpose the original change, that claims disabling the hardware is missing. It creates conditions on SOCs using the PHY initialization to be completely non working in OTG mode. Original change [1] should be reworked to be platform specific. [1] https://lore.kernel.org/r/20221206-dwc2-gadget-dual-role-v1-2-36515e1092cd@theobroma-systems.com Fixes: ade23d7b7ec5 ("usb: dwc2: power on/off phy for peripheral mode in dual-role mode") Cc: stable <stable@kernel.org> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Tested-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20230315144433.3095859-1-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30usb: misc: onboard-hub: add support for Microchip USB2517 USB 2.0 hubAlexander Stein
commit f7c13cb48e85538709850589b496c4ddb3d3898e upstream. Add support for Microchip USB2517 USB 2.0 hub to the onboard usb hub driver. Adopt the generic usb-device compatible ("usbVID,PID"). This hub has the same reset timings as USB2514, so reuse that one. There is also an USB2517I which just has industrial temperature range. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: stable <stable@kernel.org> Acked-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20230223073920.2912298-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS583Gen 2Yaroslav Furman
commit a37eb61b6ec064ac794b8a1e89fd33eb582fe51d upstream. Just like other JMicron JMS5xx enclosures, it chokes on report-opcodes, let's avoid them. Signed-off-by: Yaroslav Furman <yaro330@gmail.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230312090745.47962-1-yaro330@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-11usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() failsYang Yingliang
commit 7ebb605d2283fb2647b4fa82030307ce00bee436 upstream. If kstrtou8() fails, the mutex_unlock() is missed, move kstrtou8() before mutex_lock() to fix it up. Fixes: 0525210c9840 ("usb: gadget: uvc: Allow definition of XUs in configfs") Fixes: b3c839bd8a07 ("usb: gadget: uvc: Make bSourceID read/write") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230213070926.776447-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-11usb: gadget: uvc: Make bSourceID read/writeDaniel Scally
[ Upstream commit b3c839bd8a07d303bc59a900d55dd35c7826562c ] At the moment, the UVC function graph is hardcoded IT -> PU -> OT. To add XU support we need the ability to insert the XU descriptors into the chain. To facilitate that, make the output terminal's bSourceID attribute writeable so that we can configure its source. Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Link: https://lore.kernel.org/r/20230206161802.892954-2-dan.scally@ideasonboard.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11USB: ene_usb6250: Allocate enough memory for full objectKees Cook
[ Upstream commit ce33e64c1788912976b61314b56935abd4bc97ef ] The allocation of PageBuffer is 512 bytes in size, but the dereferencing of struct ms_bootblock_idi (also size 512) happens at a calculated offset within the allocation, which means the object could potentially extend beyond the end of the allocation. Avoid this case by just allocating enough space to catch any accesses beyond the end. Seen with GCC 13: ../drivers/usb/storage/ene_ub6250.c: In function 'ms_lib_process_bootblock': ../drivers/usb/storage/ene_ub6250.c:1050:44: warning: array subscript 'struct ms_bootblock_idi[0]' is partly outside array bounds of 'unsigned char[512]' [-Warray-bounds=] 1050 | if (le16_to_cpu(idi->wIDIgeneralConfiguration) != MS_IDI_GENERAL_CONF) | ^~ ../include/uapi/linux/byteorder/little_endian.h:37:51: note: in definition of macro '__le16_to_cpu' 37 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x)) | ^ ../drivers/usb/storage/ene_ub6250.c:1050:29: note: in expansion of macro 'le16_to_cpu' 1050 | if (le16_to_cpu(idi->wIDIgeneralConfiguration) != MS_IDI_GENERAL_CONF) | ^~~~~~~~~~~ In file included from ../drivers/usb/storage/ene_ub6250.c:5: In function 'kmalloc', inlined from 'ms_lib_process_bootblock' at ../drivers/usb/storage/ene_ub6250.c:942:15: ../include/linux/slab.h:580:24: note: at offset [256, 512] into object of size 512 allocated by 'kmalloc_trace' 580 | return kmalloc_trace( | ^~~~~~~~~~~~~~ 581 | kmalloc_caches[kmalloc_type(flags)][index], | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 582 | flags, size); | ~~~~~~~~~~~~ Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230204183546.never.849-kees@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11usb: host: xhci: mvebu: Iterate over array indexes instead of using pointer mathKees Cook
[ Upstream commit 0fbd2cda92cdb00f72080665554a586f88bca821 ] Walking the dram->cs array was seen as accesses beyond the first array item by the compiler. Instead, use the array index directly. This allows for run-time bounds checking under CONFIG_UBSAN_BOUNDS as well. Seen with GCC 13 with -fstrict-flex-arrays: In function 'xhci_mvebu_mbus_config', inlined from 'xhci_mvebu_mbus_init_quirk' at ../drivers/usb/host/xhci-mvebu.c:66:2: ../drivers/usb/host/xhci-mvebu.c:37:28: warning: array subscript 0 is outside array bounds of 'const struct mbus_dram_window[0]' [-Warray-bounds=] 37 | writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | | ~~^~~~~~ Cc: Mathias Nyman <mathias.nyman@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230204183651.never.663-kees@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11USB: gadget: pxa27x_udc: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman
[ Upstream commit 7a6952fa0366d4408eb8695af1a0578c39ec718a ] When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Link: https://lore.kernel.org/r/20230202153235.2412790-12-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11USB: gadget: pxa25x_udc: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman
[ Upstream commit 7a038a681b7df78362d9fc7013e5395a694a9d3a ] When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Link: https://lore.kernel.org/r/20230202153235.2412790-11-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-11USB: gadget: lpc32xx_udc: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman
[ Upstream commit e3965acaf3739fde9d74ad82979b46d37c6c208f ] When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Cc: Jakob Koschel <jakobkoschel@gmail.com> Cc: Miaoqian Lin <linmq006@gmail.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Link: https://lore.kernel.org/r/20230202153235.2412790-10-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.51.0) at 2026-10-20 03:05:18 +0000