summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2019-12-17usb: typec: fix use after free in typec_register_port()Wen Yang
commit 5c388abefda0d92355714010c0199055c57ab6c7 upstream. We can't use "port->sw" and/or "port->mux" after it has been freed. Fixes: 23481121c81d ("usb: typec: class: Don't use port parent for getting mux handles") Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Cc: stable <stable@vger.kernel.org> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20191126140452.14048-1-wenyang@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17usb: dwc3: ep0: Clear started flag on completionThinh Nguyen
commit 2d7b78f59e020b07fc6338eefe286f54ee2d6773 upstream. Clear ep0's DWC3_EP_TRANSFER_STARTED flag if the END_TRANSFER command is completed. Otherwise, we can't start control transfer again after END_TRANSFER. Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17usb: dwc3: gadget: Clear started flag for non-IOCThinh Nguyen
commit d3abda5a98a18e524e17fd4085c9f4bd53e9ef53 upstream. Normally the END_TRANSFER command completion handler will clear the DWC3_EP_TRANSFER_STARTED flag. However, if the command was sent without interrupt on completion, then the flag will not be cleared. Make sure to clear the flag in this case. Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17usb: dwc3: gadget: Fix logical conditionTejas Joglekar
commit 8c7d4b7b3d43c54c0b8c1e4adb917a151c754196 upstream. This patch corrects the condition to kick the transfer without giving back the requests when either request has remaining data or when there are pending SGs. The && check was introduced during spliting up the dwc3_gadget_ep_cleanup_completed_requests() function. Fixes: f38e35dd84e2 ("usb: dwc3: gadget: split dwc3_gadget_ep_cleanup_completed_requests()") Cc: stable@vger.kernel.org Signed-off-by: Tejas Joglekar <joglekar@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17usb: dwc3: pci: add ID for the Intel Comet Lake -H variantHeikki Krogerus
commit 3c3caae4cd6e122472efcf64759ff6392fb6bce2 upstream. The original ID that was added for Comet Lake PCH was actually for the -LP (low power) variant even though the constant for it said CMLH. Changing that while at it. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Felipe Balbi <balbi@kernel.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191212093713.60614-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17usb: mon: Fix a deadlock in usbmon between mmap and readPete Zaitcev
commit 19e6317d24c25ee737c65d1ffb7483bdda4bb54a upstream. The problem arises because our read() function grabs a lock of the circular buffer, finds something of interest, then invokes copy_to_user() straight from the buffer, which in turn takes mm->mmap_sem. In the same time, the callback mon_bin_vma_fault() is invoked under mm->mmap_sem. It attempts to take the fetch lock and deadlocks. This patch does away with protecting of our page list with any semaphores, and instead relies on the kernel not close the device while mmap is active in a process. In addition, we prohibit re-sizing of a buffer while mmap is active. This way, when (now unlocked) fault is processed, it works with the page that is intended to be mapped-in, and not some other random page. Note that this may have an ABI impact, but hopefully no legitimate program is this wrong. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Reported-by: syzbot+56f9673bb4cdcbeb0e92@syzkaller.appspotmail.com Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Fixes: 46eb14a6e158 ("USB: fix usbmon BUG trigger") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191204203941.3503452b@suzdal.zaitcev.lan Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17usb: core: urb: fix URB structure initialization functionEmiliano Ingrassia
commit 1cd17f7f0def31e3695501c4f86cd3faf8489840 upstream. Explicitly initialize URB structure urb_list field in usb_init_urb(). This field can be potentially accessed uninitialized and its initialization is coherent with the usage of list_del_init() in usb_hcd_unlink_urb_from_ep() and usb_giveback_urb_bh() and its explicit initialization in usb_hcd_submit_urb() error path. Signed-off-by: Emiliano Ingrassia <ingrassia@epigenesys.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191127160355.GA27196@ingrassia.epigenesys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17USB: adutux: fix interface sanity checkJohan Hovold
commit 3c11c4bed02b202e278c0f5c319ae435d7fb9815 upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 03270634e242 ("USB: Add ADU support for Ontrak ADU devices") Cc: stable <stable@vger.kernel.org> # 2.6.19 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191210112601.3561-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17usb: roles: fix a potential use after freeWen Yang
commit 1848a543191ae32e558bb0a5974ae7c38ebd86fc upstream. Free the sw structure only after we are done using it. This patch just moves the put_device() down a bit to avoid the use after free. Fixes: 5c54fcac9a9d ("usb: roles: Take care of driver module reference counting") Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Cc: stable <stable@vger.kernel.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20191124142236.25671-1-wenyang@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17USB: serial: io_edgeport: fix epic endpoint lookupJohan Hovold
commit 7c5a2df3367a2c4984f1300261345817d95b71f8 upstream. Make sure to use the current alternate setting when looking up the endpoints on epic devices to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 6e8cf7751f9f ("USB: add EPIC support to the io_edgeport driver") Cc: stable <stable@vger.kernel.org> # 2.6.21 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191210112601.3561-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17USB: idmouse: fix interface sanity checksJohan Hovold
commit 59920635b89d74b9207ea803d5e91498d39e8b69 upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191210112601.3561-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17USB: atm: ueagle-atm: add missing endpoint checkJohan Hovold
commit 09068c1ad53fb077bdac288869dec2435420bdc4 upstream. Make sure that the interrupt interface has an endpoint before trying to access its endpoint descriptors to avoid dereferencing a NULL pointer. The driver binds to the interrupt interface with interface number 0, but must not assume that this interface or its current alternate setting are the first entries in the corresponding configuration arrays. Fixes: b72458a80c75 ("[PATCH] USB: Eagle and ADI 930 usb adsl modem driver") Cc: stable <stable@vger.kernel.org> # 2.6.16 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191210112601.3561-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17xhci: make sure interrupts are restored to correct stateMathias Nyman
commit bd82873f23c9a6ad834348f8b83f3b6a5bca2c65 upstream. spin_unlock_irqrestore() might be called with stale flags after reading port status, possibly restoring interrupts to a incorrect state. If a usb2 port just finished resuming while the port status is read the spin lock will be temporary released and re-acquired in a separate function. The flags parameter is passed as value instead of a pointer, not updating flags properly before the final spin_unlock_irqrestore() is called. Cc: <stable@vger.kernel.org> # v3.12+ Fixes: 8b3d45705e54 ("usb: Fix xHCI host issues on remote wakeup.") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17xhci: handle some XHCI_TRUST_TX_LENGTH quirks cases as default behaviour.Mathias Nyman
commit 7ff11162808cc2ec66353fc012c58bb449c892c3 upstream. xhci driver claims it needs XHCI_TRUST_TX_LENGTH quirk for both Broadcom/Cavium and a Renesas xHC controllers. The quirk was inteded for handling false "success" complete event for transfers that had data left untransferred. These transfers should complete with "short packet" events instead. In these two new cases the false "success" completion is reported after a "short packet" if the TD consists of several TRBs. xHCI specs 4.10.1.1.2 say remaining TRBs should report "short packet" as well after the first short packet in a TD, but this issue seems so common it doesn't make sense to add the quirk for all vendors. Turn these events into short packets automatically instead. This gets rid of the "The WARN Successful completion on short TX for slot 1 ep 1: needs XHCI_TRUST_TX_LENGTH quirk" warning in many cases. Cc: <stable@vger.kernel.org> Reported-by: Eli Billauer <eli.billauer@gmail.com> Reported-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Eli Billauer <eli.billauer@gmail.com> Tested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17xhci: Increase STS_HALT timeout in xhci_suspend()Kai-Heng Feng
commit 7c67cf6658cec70d8a43229f2ce74ca1443dc95e upstream. I've recently observed failed xHCI suspend attempt on AMD Raven Ridge system: kernel: xhci_hcd 0000:04:00.4: WARN: xHC CMD_RUN timeout kernel: PM: suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 kernel: PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 kernel: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns -110 kernel: PM: Device 0000:04:00.4 failed to suspend async: error -110 Similar to commit ac343366846a ("xhci: Increase STS_SAVE timeout in xhci_suspend()") we also need to increase the HALT timeout to make it be able to suspend again. Cc: <stable@vger.kernel.org> # 5.2+ Fixes: f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17xhci: fix USB3 device initiated resume race with roothub autosuspendMathias Nyman
commit 057d476fff778f1d3b9f861fdb5437ea1a3cfc99 upstream. A race in xhci USB3 remote wake handling may force device back to suspend after it initiated resume siganaling, causing a missed resume event or warm reset of device. When a USB3 link completes resume signaling and goes to enabled (UO) state a interrupt is issued and the interrupt handler will clear the bus_state->port_remote_wakeup resume flag, allowing bus suspend. If the USB3 roothub thread just finished reading port status before the interrupt, finding ports still in suspended (U3) state, but hasn't yet started suspending the hub, then the xhci interrupt handler will clear the flag that prevented roothub suspend and allow bus to suspend, forcing all port links back to suspended (U3) state. Example case: usb_runtime_suspend() # because all ports still show suspended U3 usb_suspend_both() hub_suspend(); # successful as hub->wakeup_bits not set yet ==> INTERRUPT xhci_irq() handle_port_status() clear bus_state->port_remote_wakeup usb_wakeup_notification() sets hub->wakeup_bits; kick_hub_wq() <== END INTERRUPT hcd_bus_suspend() xhci_bus_suspend() # success as port_remote_wakeup bits cleared Fix this by increasing roothub usage count during port resume to prevent roothub autosuspend, and by making sure bus_state->port_remote_wakeup flag is only cleared after resume completion is visible, i.e. after xhci roothub returned U0 or other non-U3 link state link on a get port status request. Issue rootcaused by Chiasheng Lee Cc: <stable@vger.kernel.org> Cc: Lee, Hou-hsun <hou-hsun.lee@intel.com> Reported-by: Lee, Chiasheng <chiasheng.lee@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17xhci: Fix memory leak in xhci_add_in_port()Mika Westerberg
commit ce91f1a43b37463f517155bdfbd525eb43adbd1a upstream. When xHCI is part of Alpine or Titan Ridge Thunderbolt controller and the xHCI device is hot-removed as a result of unplugging a dock for example, the driver leaks memory it allocates for xhci->usb3_rhub.psi and xhci->usb2_rhub.psi in xhci_add_in_port() as reported by kmemleak: unreferenced object 0xffff922c24ef42f0 (size 16): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 16 bytes): 21 00 0c 00 12 00 dc 05 23 00 e0 01 00 00 00 00 !.......#....... backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 unreferenced object 0xffff922c24ef3318 (size 8): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 8 bytes): 34 01 05 00 35 41 0a 00 4...5A.. backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 Fix this by calling kfree() for the both psi objects in xhci_mem_cleanup(). Cc: <stable@vger.kernel.org> # 4.4+ Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17usb: xhci: only set D3hot for pci deviceHenry Lin
commit f2c710f7dca8457e88b4ac9de2060f011254f9dd upstream. Xhci driver cannot call pci_set_power_state() on non-pci xhci host controllers. For example, NVIDIA Tegra XHCI host controller which acts as platform device with XHCI_SPURIOUS_WAKEUP quirk set in some platform hits this issue during shutdown. Cc: <stable@vger.kernel.org> Fixes: 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell") Signed-off-by: Henry Lin <henryl@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17usb: host: xhci-tegra: Correct phy enable sequenceNagarjuna Kristam
commit 6351653febbb784d86fdf83afe41f7523a61b392 upstream. XUSB phy needs to be enabled before un-powergating the power partitions. However in the current sequence, it happens opposite. Correct the phy enable and powergating partition sequence to avoid any boot hangs. Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Jui Chang Kuo <jckuo@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/1572859470-7823-1-git-send-email-nkristam@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17usb: Allow USB device to be warm reset in suspended stateKai-Heng Feng
commit e76b3bf7654c3c94554c24ba15a3d105f4006c80 upstream. On Dell WD15 dock, sometimes USB ethernet cannot be detected after plugging cable to the ethernet port, the hub and roothub get runtime resumed and runtime suspended immediately: ... [ 433.315169] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_resume: 0 [ 433.315204] usb usb4: usb auto-resume [ 433.315226] hub 4-0:1.0: hub_resume [ 433.315239] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10202e2, return 0x10343 [ 433.315264] usb usb4-port1: status 0343 change 0001 [ 433.315279] xhci_hcd 0000:3a:00.0: clear port1 connect change, portsc: 0x10002e2 [ 433.315293] xhci_hcd 0000:3a:00.0: Get port status 4-2 read: 0x2a0, return 0x2a0 [ 433.317012] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling. [ 433.422282] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10002e2, return 0x343 [ 433.422307] usb usb4-port1: do warm reset [ 433.422311] usb 4-1: device reset not allowed in state 8 [ 433.422339] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 433.422346] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10002e2, return 0x343 [ 433.422356] usb usb4-port1: do warm reset [ 433.422358] usb 4-1: device reset not allowed in state 8 [ 433.422428] xhci_hcd 0000:3a:00.0: set port remote wake mask, actual port 0 status = 0xf0002e2 [ 433.422455] xhci_hcd 0000:3a:00.0: set port remote wake mask, actual port 1 status = 0xe0002a0 [ 433.422465] hub 4-0:1.0: hub_suspend [ 433.422475] usb usb4: bus auto-suspend, wakeup 1 [ 433.426161] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling. [ 433.466209] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.510204] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.554051] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.598235] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.642154] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.686204] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.730205] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.774203] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.818207] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.862040] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.862053] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling. [ 433.862077] xhci_hcd 0000:3a:00.0: xhci_suspend: stopping port polling. [ 433.862096] xhci_hcd 0000:3a:00.0: // Setting command ring address to 0x8578fc001 [ 433.862312] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_suspend: 0 [ 433.862445] xhci_hcd 0000:3a:00.0: PME# enabled [ 433.902376] xhci_hcd 0000:3a:00.0: restoring config space at offset 0xc (was 0x0, writing 0x20) [ 433.902395] xhci_hcd 0000:3a:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100403) [ 433.902490] xhci_hcd 0000:3a:00.0: PME# disabled [ 433.902504] xhci_hcd 0000:3a:00.0: enabling bus mastering [ 433.902547] xhci_hcd 0000:3a:00.0: // Setting command ring address to 0x8578fc001 [ 433.902649] pcieport 0000:00:1b.0: PME: Spurious native interrupt! [ 433.902839] xhci_hcd 0000:3a:00.0: Port change event, 4-1, id 3, portsc: 0xb0202e2 [ 433.902842] xhci_hcd 0000:3a:00.0: resume root hub [ 433.902845] xhci_hcd 0000:3a:00.0: handle_port_status: starting port polling. [ 433.902877] xhci_hcd 0000:3a:00.0: xhci_resume: starting port polling. [ 433.902889] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling. [ 433.902891] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_resume: 0 [ 433.902919] usb usb4: usb wakeup-resume [ 433.902942] usb usb4: usb auto-resume [ 433.902966] hub 4-0:1.0: hub_resume ... As Mathias pointed out, the hub enters Cold Attach Status state and requires a warm reset. However usb_reset_device() bails out early when the device is in suspended state, as its callers port_event() and hub_event() don't always resume the device. Since there's nothing wrong to reset a suspended device, allow usb_reset_device() to do so to solve the issue. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191106062710.29880-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17USB: uas: heed CAPACITY_HEURISTICSOliver Neukum
commit 335cbbd5762d5e5c67a8ddd6e6362c2aa42a328f upstream. There is no need to ignore this flag. We should be as close to storage in that regard as makes sense, so honor flags whose cost is tiny. Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191114112758.32747-3-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17USB: uas: honor flag to avoid CAPACITY16Oliver Neukum
commit bff000cae1eec750d62e265c4ba2db9af57b17e1 upstream. Copy the support over from usb-storage to get feature parity Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191114112758.32747-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17usb: gadget: pch_udc: fix use after freeGustavo A. R. Silva
commit 66d1b0c0580b7f1b1850ee4423f32ac42afa2e92 upstream. Remove pointer dereference after free. pci_pool_free doesn't care about contents of td. It's just a void* for it Addresses-Coverity-ID: 1091173 ("Use after free") Cc: stable@vger.kernel.org Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20191106202821.GA20347@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17usb: gadget: configfs: Fix missing spin_lock_init()Wei Yongjun
commit 093edc2baad2c258b1f55d1ab9c63c2b5ae67e42 upstream. The driver allocates the spinlock but not initialize it. Use spin_lock_init() on it to initialize it correctly. This is detected by Coccinelle semantic patch. Fixes: 1a1c851bbd70 ("usb: gadget: configfs: fix concurrent issue between composite APIs") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20191030034046.188808-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-13usb: gadget: u_serial: add missing port entry lockingMichał Mirosław
commit daf82bd24e308c5a83758047aff1bd81edda4f11 upstream. gserial_alloc_line() misses locking (for a release barrier) while resetting port entry on TTY allocation failure. Fix this. Cc: stable@vger.kernel.org Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-04USB: serial: ftdi_sio: add device IDs for U-Blox C099-F9PFabio D'Urso
commit c1a1f273d0825774c80896b8deb1c9ea1d0b91e3 upstream. This device presents itself as a USB hub with three attached devices: - An ACM serial port connected to the GPS module (not affected by this commit) - An FTDI serial port connected to the GPS module (1546:0502) - Another FTDI serial port connected to the ODIN-W2 radio module (1546:0503) This commit registers U-Blox's VID and the PIDs of the second and third devices. Datasheet: https://www.u-blox.com/sites/default/files/C099-F9P-AppBoard-Mbed-OS3-FW_UserGuide_%28UBX-18063024%29.pdf Signed-off-by: Fabio D'Urso <fabiodurso@hotmail.it> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-04usb: dwc2: use a longer core rest timeout in dwc2_core_reset()Mathias Kresin
commit 6689f0f4bb14e50917ba42eb9b41c25e0184970c upstream. Testing on different generations of Lantiq MIPS SoC based boards, showed that it takes up to 1500 us until the core reset bit is cleared. The driver from the vendor SDK (ifxhcd) uses a 1 second timeout. Use the same timeout to fix wrong hang detections and make the driver work for Lantiq MIPS SoCs. At least till kernel 4.14 the hanging reset only caused a warning but the driver was probed successful. With kernel 4.19 errors out with EBUSY. Cc: linux-stable <stable@vger.kernel.org> # 4.19+ Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-29USB: serial: option: add support for Foxconn T77W968 LTE modulesAleksander Morgado
commit f0797095423e6ea3b4be61134ee353c7f504d440 upstream. These are the Foxconn-branded variants of the Dell DW5821e modules, same USB layout as those. The device exposes AT, NMEA and DIAG ports in both USB configurations. P: Vendor=0489 ProdID=e0b4 Rev=03.18 S: Manufacturer=FII S: Product=T77W968 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option P: Vendor=0489 ProdID=e0b4 Rev=03.18 S: Manufacturer=FII S: Product=T77W968 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> [ johan: drop id defines ] Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-29USB: serial: option: add support for DW5821e with eSIM supportAleksander Morgado
commit 957c31ea082e3fe5196f46d5b04018b10de47400 upstream. The device exposes AT, NMEA and DIAG ports in both USB configurations. Exactly same layout as the default DW5821e module, just a different vid/pid. P: Vendor=413c ProdID=81e0 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5821e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option P: Vendor=413c ProdID=81e0 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5821e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-29USB: serial: mos7840: fix remote wakeupJohan Hovold
commit 92fe35fb9c70a00d8fbbf5bd6172c921dd9c7815 upstream. The driver was setting the device remote-wakeup feature during probe in violation of the USB specification (which says it should only be set just prior to suspending the device). This could potentially waste power during suspend as well as lead to spurious wakeups. Note that USB core would clear the remote-wakeup feature at first resume. Fixes: 3f5429746d91 ("USB: Moschip 7840 USB-Serial Driver") Cc: stable <stable@vger.kernel.org> # 2.6.19 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-29USB: serial: mos7720: fix remote wakeupJohan Hovold
commit ea422312a462696093b5db59d294439796cba4ad upstream. The driver was setting the device remote-wakeup feature during probe in violation of the USB specification (which says it should only be set just prior to suspending the device). This could potentially waste power during suspend as well as lead to spurious wakeups. Note that USB core would clear the remote-wakeup feature at first resume. Fixes: 0f64478cbc7a ("USB: add USB serial mos7720 driver") Cc: stable <stable@vger.kernel.org> # 2.6.19 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-29USB: serial: mos7840: add USB ID to support Moxa UPort 2210Pavel Löbl
commit e696d00e65e81d46e911f24b12e441037bf11b38 upstream. Add USB ID for MOXA UPort 2210. This device contains mos7820 but it passes GPIO0 check implemented by driver and it's detected as mos7840. Hence product id check is added to force mos7820 mode. Signed-off-by: Pavel Löbl <pavel@loebl.cz> Cc: stable <stable@vger.kernel.org> [ johan: rename id defines and add vendor-id check ] Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-29appledisplay: fix error handling in the scheduled workOliver Neukum
commit 91feb01596e5efc0cc922cc73f5583114dccf4d2 upstream. The work item can operate on 1. stale memory left over from the last transfer the actual length of the data transfered needs to be checked 2. memory already freed the error handling in appledisplay_probe() needs to cancel the work in that case Reported-and-tested-by: syzbot+495dab1f175edc9c2f13@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191106124902.7765-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-29USB: chaoskey: fix error case of a timeoutOliver Neukum
commit 92aa5986f4f7b5a8bf282ca0f50967f4326559f5 upstream. In case of a timeout or if a signal aborts a read communication with the device needs to be ended lest we overwrite an active URB the next time we do IO to the device, as the URB may still be active. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191107142856.16774-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-29usb-serial: cp201x: support Mark-10 digital force gaugeGreg Kroah-Hartman
commit 347bc8cb26388791c5881a3775cb14a3f765a674 upstream. Add support for the Mark-10 digital force gauge device to the cp201x driver. Based on a report and a larger patch from Joel Jennings Reported-by: Joel Jennings <joel.jennings@makeitlabs.com> Cc: stable <stable@vger.kernel.org> Acked-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191118092119.GA153852@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-29usbip: Fix uninitialized symbol 'nents' in stub_recv_cmd_submit()Suwan Kim
commit 2a9125317b247f2cf35c196f968906dcf062ae2d upstream. Smatch reported that nents is not initialized and used in stub_recv_cmd_submit(). nents is currently initialized by sgl_alloc() and used to allocate multiple URBs when host controller doesn't support scatter-gather DMA. The use of uninitialized nents means that buf_len is zero and use_sg is true. But buffer length should not be zero when an URB uses scatter-gather DMA. To prevent this situation, add the conditional that checks buf_len and use_sg. And move the use of nents right after the sgl_alloc() to avoid the use of uninitialized nents. If the error occurs, it adds SDEV_EVENT_ERROR_MALLOC and stub_priv will be released by stub event handler and connection will be shut down. Fixes: ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191111141035.27788-1-suwan.kim027@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-29USBIP: add config dependency for SGL_ALLOCOliver Neukum
commit 1ec13abac58b6f24e32f0d3081ef4e7456e62ed8 upstream. USBIP uses lib/scatterlist.h Hence it needs to set CONFIG_SGL_ALLOC Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20191112154939.21217-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-12usbip: Fix free of unallocated memory in vhci txSuwan Kim
[ Upstream commit d4d8257754c3300ea2a465dadf8d2b02c713c920 ] iso_buffer should be set to NULL after use and free in the while loop. In the case of isochronous URB in the while loop, iso_buffer is allocated and after sending it to server, buffer is deallocated. And then, if the next URB in the while loop is not a isochronous pipe, iso_buffer still holds the previously deallocated buffer address and kfree tries to free wrong buffer address. Fixes: ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Reviewed-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20191022093017.8027-1-suwan.kim027@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12usb: dwc3: gadget: fix race when disabling ep with cancelled xfersFelipe Balbi
[ Upstream commit d8eca64eec7103ab1fbabc0a187dbf6acfb2af93 ] When disabling an endpoint which has cancelled requests, we should make sure to giveback requests that are currently pending in the cancelled list, otherwise we may fall into a situation where command completion interrupt fires after endpoint has been disabled, therefore causing a splat. Fixes: fec9095bdef4 "usb: dwc3: gadget: remove wait_end_transfer" Reported-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Link: https://lore.kernel.org/r/20191031090713.1452818-1-felipe.balbi@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12USB: ldusb: use unsigned size format specifiersJohan Hovold
[ Upstream commit 88f6bf3846ee90bf33aa1ce848cd3bfb3229f4a4 ] A recent info-leak bug manifested itself along with warning about a negative buffer overflow: ldusb 1-1:0.28: Read buffer overflow, -131383859965943 bytes dropped when it was really a rather large positive one. A sanity check that prevents this has now been put in place, but let's fix up the size format specifiers, which should all be unsigned. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191022143203.5260-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12USB: Skip endpoints with 0 maxpacket lengthAlan Stern
[ Upstream commit d482c7bb0541d19dea8bff437a9f3c5563b5b2d2 ] Endpoints with a maxpacket length of 0 are probably useless. They can't transfer any data, and it's not at all unlikely that an HCD will crash or hang when trying to handle an URB for such an endpoint. Currently the USB core does not check for endpoints having a maxpacket value of 0. This patch adds a check, printing a warning and skipping over any endpoints it catches. Now, the USB spec does not rule out endpoints having maxpacket = 0. But since they wouldn't have any practical use, there doesn't seem to be any good reason for us to accept them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910281050420.1485-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12usb: dwc3: remove the call trace of USBx_GFLADJYinbo Zhu
[ Upstream commit a7d9874c6f3fbc8d25cd9ceba35b6822612c4ebf ] layerscape board sometimes reported some usb call trace, that is due to kernel sent LPM tokerns automatically when it has no pending transfers and think that the link is idle enough to enter L1, which procedure will ask usb register has a recovery,then kernel will compare USBx_GFLADJ and set GFLADJ_30MHZ, GFLADJ_30MHZ_REG until GFLADJ_30MHZ is equal 0x20, if the conditions were met then issue occur, but whatever the conditions whether were met that usb is all need keep GFLADJ_30MHZ of value is 0x20 (xhci spec ask use GFLADJ_30MHZ to adjust any offset from clock source that generates the clock that drives the SOF counter, 0x20 is default value of it)That is normal logic, so need remove the call trace. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12usb: gadget: configfs: fix concurrent issue between composite APIsPeter Chen
[ Upstream commit 1a1c851bbd706ea9f3a9756c2d3db28523506d3b ] We meet several NULL pointer issues if configfs_composite_unbind and composite_setup (or composite_disconnect) are running together. These issues occur when do the function switch stress test, the configfs_compsoite_unbind is called from user mode by echo "" to /sys/../UDC entry, and meanwhile, the setup interrupt or disconnect interrupt occurs by hardware. The composite_setup will get the cdev from get_gadget_data, but configfs_composite_unbind will set gadget data as NULL, so the NULL pointer issue occurs. This concurrent is hard to reproduce by native kernel, but can be reproduced by android kernel. In this commit, we introduce one spinlock belongs to structure gadget_info since we can't use the same spinlock in usb_composite_dev due to exclusive running together between composite_setup and configfs_composite_unbind. And one bit flag 'unbind' to indicate the code is at unbind routine, this bit is needed due to we release the lock at during configfs_composite_unbind sometimes, and composite_setup may be run at that time. Several oops: oops 1: android_work: sent uevent USB_STATE=CONNECTED configfs-gadget gadget: super-speed config #1: b android_work: sent uevent USB_STATE=CONFIGURED init: Received control message 'start' for 'adbd' from pid: 3515 (system_server) Unable to handle kernel NULL pointer dereference at virtual address 0000002a init: Received control message 'stop' for 'adbd' from pid: 3375 (/vendor/bin/hw/android.hardware.usb@1.1-servic) Mem abort info: Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgd = ffff8008f1b7f000 [000000000000002a] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 4 PID: 2457 Comm: irq/125-5b11000 Not tainted 4.14.98-07846-g0b40a9b-dirty #16 Hardware name: Freescale i.MX8QM MEK (DT) task: ffff8008f2a98000 task.stack: ffff00000b7b8000 PC is at composite_setup+0x44/0x1508 LR is at android_setup+0xb8/0x13c pc : [<ffff0000089ffb3c>] lr : [<ffff000008a032fc>] pstate: 800001c5 sp : ffff00000b7bbb80 x29: ffff00000b7bbb80 x28: ffff8008f2a3c010 x27: 0000000000000001 x26: 0000000000000000 [1232/1897] audit: audit_lost=25791 audit_rate_limit=5 audit_backlog_limit=64 x25: 00000000ffffffa1 x24: ffff8008f2a3c010 audit: rate limit exceeded x23: 0000000000000409 x22: ffff000009c8e000 x21: ffff8008f7a8b428 x20: ffff00000afae000 x19: ffff0000089ff000 x18: 0000000000000000 x17: 0000000000000000 x16: ffff0000082b7c9c x15: 0000000000000000 x14: f1866f5b952aca46 x13: e35502e30d44349c x12: 0000000000000008 x11: 0000000000000008 x10: 0000000000000a30 x9 : ffff00000b7bbd00 x8 : ffff8008f2a98a90 x7 : ffff8008f27a9c90 x6 : 0000000000000001 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000006 x1 : ffff0000089ff8d0 x0 : 732a010310b9ed00 X7: 0xffff8008f27a9c10: 9c10 00000002 00000000 00000001 00000000 13110000 ffff0000 00000002 00208040 9c30 00000000 00000000 00000000 00000000 00000000 00000005 00000029 00000000 9c50 00051778 00000001 f27a8e00 ffff8008 00000005 00000000 00000078 00000078 9c70 00000078 00000000 09031d48 ffff0000 00100000 00000000 00400000 00000000 9c90 00000001 00000000 00000000 00000000 00000000 00000000 ffefb1a0 ffff8008 9cb0 f27a9ca8 ffff8008 00000000 00000000 b9d88037 00000173 1618a3eb 00000001 9cd0 870a792a 0000002e 16188fe6 00000001 0000242b 00000000 00000000 00000000 using random self ethernet address 9cf0 019a4646 00000000 000547f3 00000000 ecfd6c33 00000002 00000000 using random host ethernet address 00000000 X8: 0xffff8008f2a98a10: 8a10 00000000 00000000 f7788d00 ffff8008 00000001 00000000 00000000 00000000 8a30 eb218000 ffff8008 f2a98000 ffff8008 f2a98000 ffff8008 09885000 ffff0000 8a50 f34df480 ffff8008 00000000 00000000 f2a98648 ffff8008 09c8e000 ffff0000 8a70 fff2c800 ffff8008 09031d48 ffff0000 0b7bbd00 ffff0000 0b7bbd00 ffff0000 8a90 080861bc ffff0000 00000000 00000000 00000000 00000000 00000000 00000000 8ab0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8ad0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8af0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 X21: 0xffff8008f7a8b3a8: b3a8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b3c8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b3e8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b408 00000000 00000000 00000000 00000000 00000000 00000000 00000001 00000000 b428 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b448 0053004d 00540046 00300031 00010030 eb07b520 ffff8008 20011201 00000003 b468 e418d109 0104404e 00010302 00000000 eb07b558 ffff8008 eb07b558 ffff8008 b488 f7a8b488 ffff8008 f7a8b488 ffff8008 f7a8b300 ffff8008 00000000 00000000 X24: 0xffff8008f2a3bf90: bf90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 c010 00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000 c030 f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008 c050 f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 c070 f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008 X28: 0xffff8008f2a3bf90: bf90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 c010 00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000 c030 f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008 c050 f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 c070 f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008 Process irq/125-5b11000 (pid: 2457, stack limit = 0xffff00000b7b8000) Call trace: Exception stack(0xffff00000b7bba40 to 0xffff00000b7bbb80) ba40: 732a010310b9ed00 ffff0000089ff8d0 0000000000000006 0000000000000000 ba60: 0000000000000001 0000000000000000 0000000000000001 ffff8008f27a9c90 ba80: ffff8008f2a98a90 ffff00000b7bbd00 0000000000000a30 0000000000000008 baa0: 0000000000000008 e35502e30d44349c f1866f5b952aca46 0000000000000000 bac0: ffff0000082b7c9c 0000000000000000 0000000000000000 ffff0000089ff000 bae0: ffff00000afae000 ffff8008f7a8b428 ffff000009c8e000 0000000000000409 bb00: ffff8008f2a3c010 00000000ffffffa1 0000000000000000 0000000000000001 bb20: ffff8008f2a3c010 ffff00000b7bbb80 ffff000008a032fc ffff00000b7bbb80 bb40: ffff0000089ffb3c 00000000800001c5 ffff00000b7bbb80 732a010310b9ed00 bb60: ffffffffffffffff ffff0000080f777c ffff00000b7bbb80 ffff0000089ffb3c [<ffff0000089ffb3c>] composite_setup+0x44/0x1508 [<ffff000008a032fc>] android_setup+0xb8/0x13c [<ffff0000089bd9a8>] cdns3_ep0_delegate_req+0x44/0x70 [<ffff0000089bdff4>] cdns3_check_ep0_interrupt_proceed+0x33c/0x654 [<ffff0000089bca44>] cdns3_device_thread_irq_handler+0x4b0/0x4bc [<ffff0000089b77b4>] cdns3_thread_irq+0x48/0x68 [<ffff000008145bf0>] irq_thread_fn+0x28/0x88 [<ffff000008145e38>] irq_thread+0x13c/0x228 [<ffff0000080fed70>] kthread+0x104/0x130 [<ffff000008085064>] ret_from_fork+0x10/0x18 oops2: composite_disconnect: Calling disconnect on a Gadget that is not connected android_work: did not send uevent (0 0 (null)) init: Received control message 'stop' for 'adbd' from pid: 3359 (/vendor/bin/hw/android.hardware.usb@1.1-service.imx) init: Sending signal 9 to service 'adbd' (pid 22343) process group... ------------[ cut here ]------------ audit: audit_lost=180038 audit_rate_limit=5 audit_backlog_limit=64 audit: rate limit exceeded WARNING: CPU: 0 PID: 3468 at kernel_imx/drivers/usb/gadget/composite.c:2009 composite_disconnect+0x80/0x88 Modules linked in: CPU: 0 PID: 3468 Comm: HWC-UEvent-Thre Not tainted 4.14.98-07846-g0b40a9b-dirty #16 Hardware name: Freescale i.MX8QM MEK (DT) task: ffff8008f2349c00 task.stack: ffff00000b0a8000 PC is at composite_disconnect+0x80/0x88 LR is at composite_disconnect+0x80/0x88 pc : [<ffff0000089ff9b0>] lr : [<ffff0000089ff9b0>] pstate: 600001c5 sp : ffff000008003dd0 x29: ffff000008003dd0 x28: ffff8008f2349c00 x27: ffff000009885018 x26: ffff000008004000 Timeout for IPC response! x25: ffff000009885018 x24: ffff000009c8e280 x23: ffff8008f2d98010 x22: 00000000000001c0 x21: ffff8008f2d98394 x20: ffff8008f2d98010 x19: 0000000000000000 x18: 0000e3956f4f075a fxos8700 4-001e: i2c block read acc failed x17: 0000e395735727e8 x16: ffff00000829f4d4 x15: ffffffffffffffff x14: 7463656e6e6f6320 x13: 746f6e2009090920 x12: 7369207461687420 x11: 7465676461472061 x10: 206e6f207463656e x9 : 6e6f637369642067 x8 : ffff000009c8e280 x7 : ffff0000086ca6cc x6 : ffff000009f15e78 x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffffffffffffffff x2 : c3f28b86000c3900 x1 : c3f28b86000c3900 x0 : 000000000000004e X20: 0xffff8008f2d97f90: 7f90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 libprocessgroup: Failed to kill process cgroup uid 0 pid 22343 in 215ms, 1 processes remain 7fd0 Timeout for IPC response! 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 using random self ethernet address 7ff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 8010 00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc using random host ethernet address ffff0000 8030 f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008 8050 f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 8070 f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008 X21: 0xffff8008f2d98314: 8314 ffff8008 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8334 00000000 00000000 00000000 00000000 00000000 08a04cf4 ffff0000 00000000 8354 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8374 00000000 00000000 00000000 00001001 00000000 00000000 00000000 00000000 8394 e4bbe4bb 0f230000 ffff0000 0afae000 ffff0000 ae001000 00000000 f206d400 Timeout for IPC response! 83b4 ffff8008 00000000 00000000 f7957b18 ffff8008 f7957718 ffff8008 f7957018 83d4 ffff8008 f7957118 ffff8008 f7957618 ffff8008 f7957818 ffff8008 f7957918 83f4 ffff8008 f7957d18 ffff8008 00000000 00000000 00000000 00000000 00000000 X23: 0xffff8008f2d97f90: 7f90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7ff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 8010 00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc ffff0000 8030 f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008 8050 f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 8070 f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008 X28: 0xffff8008f2349b80: 9b80 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9ba0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9bc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9be0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9c00 00000022 00000000 ffffffff ffffffff 00010001 00000000 00000000 00000000 9c20 0b0a8000 ffff0000 00000002 00404040 00000000 00000000 00000000 00000000 9c40 00000001 00000000 00000001 00000000 001ebd44 00000001 f390b800 ffff8008 9c60 00000000 00000001 00000070 00000070 00000070 00000000 09031d48 ffff0000 Call trace: Exception stack(0xffff000008003c90 to 0xffff000008003dd0) 3c80: 000000000000004e c3f28b86000c3900 3ca0: c3f28b86000c3900 ffffffffffffffff 0000000000000000 0000000000000000 3cc0: ffff000009f15e78 ffff0000086ca6cc ffff000009c8e280 6e6f637369642067 3ce0: 206e6f207463656e 7465676461472061 7369207461687420 746f6e2009090920 3d00: 7463656e6e6f6320 ffffffffffffffff ffff00000829f4d4 0000e395735727e8 3d20: 0000e3956f4f075a 0000000000000000 ffff8008f2d98010 ffff8008f2d98394 3d40: 00000000000001c0 ffff8008f2d98010 ffff000009c8e280 ffff000009885018 3d60: ffff000008004000 ffff000009885018 ffff8008f2349c00 ffff000008003dd0 3d80: ffff0000089ff9b0 ffff000008003dd0 ffff0000089ff9b0 00000000600001c5 3da0: ffff8008f33f2cd8 0000000000000000 0000ffffffffffff 0000000000000000 init: Received control message 'start' for 'adbd' from pid: 3359 (/vendor/bin/hw/android.hardware.usb@1.1-service.imx) 3dc0: ffff000008003dd0 ffff0000089ff9b0 [<ffff0000089ff9b0>] composite_disconnect+0x80/0x88 [<ffff000008a044d4>] android_disconnect+0x3c/0x68 [<ffff0000089ba9f8>] cdns3_device_irq_handler+0xfc/0x2c8 [<ffff0000089b84c0>] cdns3_irq+0x44/0x94 [<ffff00000814494c>] __handle_irq_event_percpu+0x60/0x24c [<ffff000008144c0c>] handle_irq_event+0x58/0xc0 [<ffff00000814873c>] handle_fasteoi_irq+0x98/0x180 [<ffff000008143a10>] generic_handle_irq+0x24/0x38 [<ffff000008144170>] __handle_domain_irq+0x60/0xac [<ffff0000080819c4>] gic_handle_irq+0xd4/0x17c Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12usb: dwc3: pci: prevent memory leak in dwc3_pci_probeNavid Emamdoost
[ Upstream commit 9bbfceea12a8f145097a27d7c7267af25893c060 ] In dwc3_pci_probe a call to platform_device_alloc allocates a device which is correctly put in case of error except one case: when the call to platform_device_add_properties fails it directly returns instead of going to error handling. This commit replaces return with the goto. Fixes: 1a7b12f69a94 ("usb: dwc3: pci: Supply device properties via driver data") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12usb: gadget: composite: Fix possible double free memory bugChandana Kishori Chiluveru
[ Upstream commit 1c20c89b0421b52b2417bb0f62a611bc669eda1d ] composite_dev_cleanup call from the failure of configfs_composite_bind frees up the cdev->os_desc_req and cdev->req. If the previous calls of bind and unbind is successful these will carry stale values. Consider the below sequence of function calls: configfs_composite_bind() composite_dev_prepare() - Allocate cdev->req, cdev->req->buf composite_os_desc_req_prepare() - Allocate cdev->os_desc_req, cdev->os_desc_req->buf configfs_composite_unbind() composite_dev_cleanup() - free the cdev->os_desc_req->buf and cdev->req->buf Next composition switch configfs_composite_bind() - If it fails goto err_comp_cleanup will call the composite_dev_cleanup() function composite_dev_cleanup() - calls kfree up with the stale values of cdev->req->buf and cdev->os_desc_req from the previous configfs_composite_bind call. The free call on these stale values leads to double free. Hence, Fix this issue by setting request and buffer pointer to NULL after kfree. Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12usb: gadget: udc: atmel: Fix interrupt storm in FIFO mode.Cristian Birsan
[ Upstream commit ba3a1a915c49cc3023e4ddfc88f21e7514e82aa4 ] Fix interrupt storm generated by endpoints when working in FIFO mode. The TX_COMPLETE interrupt is used only by control endpoints processing. Do not enable it for other types of endpoints. Fixes: 914a3f3b3754 ("USB: add atmel_usba_udc driver") Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12usb: fsl: Check memory resource before releasing itNikhil Badola
[ Upstream commit bc1e3a2dd0c9954fd956ac43ca2876bbea018c01 ] Check memory resource existence before releasing it to avoid NULL pointer dereference Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12usb: dwc3: select CONFIG_REGMAP_MMIOArnd Bergmann
[ Upstream commit a51bab592fbbef10f0e42a8aed86adfbf6a68fa7 ] After many randconfig builds, one configuration caused a link error with dwc3-meson-g12a lacking the regmap-mmio code: drivers/usb/dwc3/dwc3-meson-g12a.o: In function `dwc3_meson_g12a_probe': dwc3-meson-g12a.c:(.text+0x9f): undefined reference to `__devm_regmap_init_mmio_clk' Add the select statement that we have for all other users of that dependency. Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue") Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12usbip: Implement SG support to vhci-hcd and stub driverSuwan Kim
commit ea44d190764b4422af4d1c29eaeb9e69e353b406 upstream. There are bugs on vhci with usb 3.0 storage device. In USB, each SG list entry buffer should be divisible by the bulk max packet size. But with native SG support, this problem doesn't matter because the SG buffer is treated as contiguous buffer. But without native SG support, USB storage driver breaks SG list into several URBs and the error occurs because of a buffer size of URB that cannot be divided by the bulk max packet size. The error situation is as follows. When USB Storage driver requests 31.5 KB data and has SG list which has 3584 bytes buffer followed by 7 4096 bytes buffer for some reason. USB Storage driver splits this SG list into several URBs because VHCI doesn't support SG and sends them separately. So the first URB buffer size is 3584 bytes. When receiving data from device, USB 3.0 device sends data packet of 1024 bytes size because the max packet size of BULK pipe is 1024 bytes. So device sends 4096 bytes. But the first URB buffer has only 3584 bytes buffer size. So host controller terminates the transfer even though there is more data to receive. So, vhci needs to support SG transfer to prevent this error. In this patch, vhci supports SG regardless of whether the server's host controller supports SG or not, because stub driver splits SG list into several URBs if the server's host controller doesn't support SG. To support SG, vhci sets URB_DMA_MAP_SG flag in urb->transfer_flags if URB has SG list and this flag will tell stub driver to use SG list. After receiving urb from stub driver, vhci clear URB_DMA_MAP_SG flag to avoid unnecessary DMA unmapping in HCD. vhci sends each SG list entry to stub driver. Then, stub driver sees the total length of the buffer and allocates SG table and pages according to the total buffer length calling sgl_alloc(). After stub driver receives completed URB, it again sends each SG list entry to vhci. If the server's host controller doesn't support SG, stub driver breaks a single SG request into several URBs and submits them to the server's host controller. When all the split URBs are completed, stub driver reassembles the URBs into a single return command and sends it to vhci. Moreover, in the situation where vhci supports SG, but stub driver does not, or vice versa, usbip works normally. Because there is no protocol modification, there is no problem in communication between server and client even if the one has a kernel without SG support. In the case of vhci supports SG and stub driver doesn't, because vhci sends only the total length of the buffer to stub driver as it did before the patch applied, stub driver only needs to allocate the required length of buffers using only kmalloc() regardless of whether vhci supports SG or not. But stub driver has to allocate buffer with kmalloc() as much as the total length of SG buffer which is quite huge when vhci sends SG request, so it has overhead in buffer allocation in this situation. If stub driver needs to send data buffer to vhci because of IN pipe, stub driver also sends only total length of buffer as metadata and then sends real data as vhci does. Then vhci receive data from stub driver and store it to the corresponding buffer of SG list entry. And for the case of stub driver supports SG and vhci doesn't, since the USB storage driver checks that vhci doesn't support SG and sends the request to stub driver by splitting the SG list into multiple URBs, stub driver allocates a buffer for each URB with kmalloc() as it did before this patch. * Test environment Test uses two difference machines and two different kernel version to make mismatch situation between the client and the server where vhci supports SG, but stub driver does not, or vice versa. All tests are conducted in both full SG support that both vhci and stub support SG and half SG support that is the mismatch situation. Test kernel version is 5.3-rc6 with commit "usb: add a HCD_DMA flag instead of guestimating DMA capabilities" to avoid unnecessary DMA mapping and unmapping. - Test kernel version - 5.3-rc6 with SG support - 5.1.20-200.fc29.x86_64 without SG support * SG support test - Test devices - Super-speed storage device - SanDisk Ultra USB 3.0 - High-speed storage device - SMI corporation USB 2.0 flash drive - Test description Test read and write operation of mass storage device that uses the BULK transfer. In test, the client reads and writes files whose size is over 1G and it works normally. * Regression test - Test devices - Super-speed device - Logitech Brio webcam - High-speed device - Logitech C920 HD Pro webcam - Full-speed device - Logitech bluetooth mouse - Britz BR-Orion speaker - Low-speed device - Logitech wired mouse - Test description Moving and click test for mouse. To test the webcam, use gnome-cheese. To test the speaker, play music and video on the client. All works normally. * VUDC compatibility test VUDC also works well with this patch. Tests are done with two USB gadget created by CONFIGFS USB gadget. Both use the BULK pipe. 1. Serial gadget 2. Mass storage gadget - Serial gadget test Serial gadget on the host sends and receives data using cat command on the /dev/ttyGS<N>. The client uses minicom to communicate with the serial gadget. - Mass storage gadget test After connecting the gadget with vhci, use "dd" to test read and write operation on the client side. Read - dd if=/dev/sd<N> iflag=direct of=/dev/null bs=1G count=1 Write - dd if=<my file path> iflag=direct of=/dev/sd<N> bs=1G count=1 Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Acked-by: Shuah khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20190828032741.12234-1-suwan.kim027@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-10usb: gadget: udc: core: Fix segfault if udc_bind_to_driver() for pending ↵Roger Quadros
driver fails commit 163be6ff7739b12ff300d77897d340f661821da2 upstream. If a gadget driver is in the pending drivers list, a UDC becomes available and udc_bind_to_driver() fails, then it gets deleted from the pending list. i.e. list_del(&driver->pending) in check_pending_gadget_drivers(). Then if that gadget driver is unregistered, usb_gadget_unregister_driver() does a list_del(&driver->pending) again thus causing a page fault as that list entry has been poisoned by the previous list_del(). Fix this by using list_del_init() instead of list_del() in check_pending_gadget_drivers(). Test case: - Make sure no UDC is available - modprobe g_mass_storage file=wrongfile - Load UDC driver so it becomes available lun0: unable to open backing file: wrongfile - modprobe -r g_mass_storage [ 60.900431] Unable to handle kernel paging request at virtual address dead000000000108 [ 60.908346] Mem abort info: [ 60.911145] ESR = 0x96000044 [ 60.914227] Exception class = DABT (current EL), IL = 32 bits [ 60.920162] SET = 0, FnV = 0 [ 60.923217] EA = 0, S1PTW = 0 [ 60.926354] Data abort info: [ 60.929228] ISV = 0, ISS = 0x00000044 [ 60.933058] CM = 0, WnR = 1 [ 60.936011] [dead000000000108] address between user and kernel address ranges [ 60.943136] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 60.948691] Modules linked in: g_mass_storage(-) usb_f_mass_storage libcomposite xhci_plat_hcd xhci_hcd usbcore ti_am335x_adc kfifo_buf omap_rng cdns3 rng_core udc_core crc32_ce xfrm_user crct10dif_ce snd_so6 [ 60.993995] Process modprobe (pid: 834, stack limit = 0x00000000c2aebc69) [ 61.000765] CPU: 0 PID: 834 Comm: modprobe Not tainted 4.19.59-01963-g065f42a60499 #92 [ 61.008658] Hardware name: Texas Instruments SoC (DT) [ 61.014472] pstate: 60000005 (nZCv daif -PAN -UAO) [ 61.019253] pc : usb_gadget_unregister_driver+0x7c/0x108 [udc_core] [ 61.025503] lr : usb_gadget_unregister_driver+0x30/0x108 [udc_core] [ 61.031750] sp : ffff00001338fda0 [ 61.035049] x29: ffff00001338fda0 x28: ffff800846d40000 [ 61.040346] x27: 0000000000000000 x26: 0000000000000000 [ 61.045642] x25: 0000000056000000 x24: 0000000000000800 [ 61.050938] x23: ffff000008d7b0d0 x22: ffff0000088b07c8 [ 61.056234] x21: ffff000001100000 x20: ffff000002020260 [ 61.061530] x19: ffff0000010ffd28 x18: 0000000000000000 [ 61.066825] x17: 0000000000000000 x16: 0000000000000000 [ 61.072121] x15: 0000000000000000 x14: 0000000000000000 [ 61.077417] x13: ffff000000000000 x12: ffffffffffffffff [ 61.082712] x11: 0000000000000030 x10: 7f7f7f7f7f7f7f7f [ 61.088008] x9 : fefefefefefefeff x8 : 0000000000000000 [ 61.093304] x7 : ffffffffffffffff x6 : 000000000000ffff [ 61.098599] x5 : 8080000000000000 x4 : 0000000000000000 [ 61.103895] x3 : ffff000001100020 x2 : ffff800846d40000 [ 61.109190] x1 : dead000000000100 x0 : dead000000000200 [ 61.114486] Call trace: [ 61.116922] usb_gadget_unregister_driver+0x7c/0x108 [udc_core] [ 61.122828] usb_composite_unregister+0x10/0x18 [libcomposite] [ 61.128643] msg_cleanup+0x18/0xfce0 [g_mass_storage] [ 61.133682] __arm64_sys_delete_module+0x17c/0x1f0 [ 61.138458] el0_svc_common+0x90/0x158 [ 61.142192] el0_svc_handler+0x2c/0x80 [ 61.145926] el0_svc+0x8/0xc [ 61.148794] Code: eb03003f d10be033 54ffff21 a94d0281 (f9000420) [ 61.154869] ---[ end trace afb22e9b637bd9a7 ]--- Segmentation fault Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.51.0) at 2026-10-16 01:24:28 +0000