summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2023-01-07usb: storage: Add check for kcallocJiasheng Jiang
[ Upstream commit c35ca10f53c51eeb610d3f8fbc6dd6d511b58a58 ] As kcalloc may return NULL pointer, the return value should be checked and return error if fails as same as the ones in alauda_read_map. Fixes: e80b0fade09e ("[PATCH] USB Storage: add alauda support") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20221208110058.12983-1-jiasheng@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-07usb: fotg210-udc: Fix ages old endianness issuesLinus Walleij
[ Upstream commit 46ed6026ca2181c917c8334a82e3eaf40a6234dd ] The code in the FOTG210 driver isn't entirely endianness-agnostic as reported by the kernel robot sparse testing. This came to the surface while moving the files around. The driver is only used on little-endian systems, so this causes no real-world regression, but it is nice to be strict and have some compile coverage also on big endian machines, so fix it up with the right LE accessors. Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver") Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/linux-usb/202211110910.0dJ7nZCn-lkp@intel.com/ Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20221111090317.94228-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-07USB: serial: cp210x: add Kamstrup RF sniffer PIDsBruno Thomsen
commit e88906b169ebcb8046e8f0ad76edd09ab41cfdfe upstream. The RF sniffers are based on cp210x where the RF frontends are based on a different USB stack. RF sniffers can analyze packets meta data including power level and perform packet injection. Can be used to perform RF frontend self-test when connected to a concentrator, ex. arch/arm/boot/dts/imx7d-flex-concentrator.dts Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-07usb: gadget: uvc: Prevent buffer overflow in setup handlerSzymon Heidrich
commit 4c92670b16727365699fe4b19ed32013bab2c107 upstream. Setup function uvc_function_setup permits control transfer requests with up to 64 bytes of payload (UVC_MAX_REQUEST_SIZE), data stage handler for OUT transfer uses memcpy to copy req->actual bytes to uvc_event->data.data array of size 60. This may result in an overflow of 4 bytes. Fixes: cdda479f15cd ("USB gadget: video class function driver") Cc: stable <stable@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Link: https://lore.kernel.org/r/20221206141301.51305-1-szymon.heidrich@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25usb: chipidea: fix deadlock in ci_otg_del_timerDuoming Zhou
commit 7a58b8d6021426b796eebfae80983374d9a80a75 upstream. There is a deadlock in ci_otg_del_timer(), the process is shown below: (thread 1) | (thread 2) ci_otg_del_timer() | ci_otg_hrtimer_func() ... | spin_lock_irqsave() //(1) | ... ... | hrtimer_cancel() | spin_lock_irqsave() //(2) (block forever) We hold ci->lock in position (1) and use hrtimer_cancel() to wait ci_otg_hrtimer_func() to stop, but ci_otg_hrtimer_func() also need ci->lock in position (2). As a result, the hrtimer_cancel() in ci_otg_del_timer() will be blocked forever. This patch extracts hrtimer_cancel() from the protection of spin_lock_irqsave() in order that the ci_otg_hrtimer_func() could obtain the ci->lock. What`s more, there will be no race happen. Because the "next_timer" is always under the protection of spin_lock_irqsave() and we only check whether "next_timer" equals to NUM_OTG_FSM_TIMERS in the following code. Fixes: 3a316ec4c91c ("usb: chipidea: use hrtimer for otg fsm timers") Cc: stable <stable@kernel.org> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220918033312.94348-1-duoming@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25usb: add NO_LPM quirk for Realforce 87U KeyboardNicolas Dumazet
commit 181135bb20dcb184edd89817831b888eb8132741 upstream. Before adding this quirk, this (mechanical keyboard) device would not be recognized, logging: new full-speed USB device number 56 using xhci_hcd unable to read config index 0 descriptor/start: -32 chopping to 0 config(s) It would take dozens of plugging/unpuggling cycles for the keyboard to be recognized. Keyboard seems to simply work after applying this quirk. This issue had been reported by users in two places already ([1], [2]) but nobody tried upstreaming a patch yet. After testing I believe their suggested fix (DELAY_INIT + NO_LPM + DEVICE_QUALIFIER) was probably a little overkill. I assume this particular combination was tested because it had been previously suggested in [3], but only NO_LPM seems sufficient for this device. [1]: https://qiita.com/float168/items/fed43d540c8e2201b543 [2]: https://blog.kostic.dev/posts/making-the-realforce-87ub-work-with-usb30-on-Ubuntu/ [3]: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678477 Cc: stable@vger.kernel.org Signed-off-by: Nicolas Dumazet <ndumazet@google.com> Link: https://lore.kernel.org/r/20221109122946.706036-1-ndumazet@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25USB: serial: option: add Fibocom FM160 0x0111 compositionReinhard Speyerer
commit 148f4b32b4504d8a32cf82049b7b9499a4b299ab upstream. Add support for the following Fibocom FM160 composition: 0x0111: MBIM + MODEM + DIAG + AT T: Bus=01 Lev=02 Prnt=125 Port=01 Cnt=02 Dev#= 93 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0111 Rev= 5.04 S: Manufacturer=Fibocom S: Product=Fibocom FM160 Modem_SN:12345678 S: SerialNumber=12345678 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25USB: serial: option: add u-blox LARA-L6 modemDavide Tronchin
commit c1547f12df8b8e9ca2686accee43213ecd117efe upstream. Add LARA-L6 PIDs for three different USB compositions. LARA-L6 module can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial interface and 1 CDC-ECM virtual network interface In default mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions In RmNet mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: RMNET interface In CDC-ECM mode LARA-L6 exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: CDC-ECM interface Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> [ johan: drop PID defines in favour of comments ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25USB: serial: option: add u-blox LARA-R6 00B modemDavide Tronchin
commit d9e37a5c4d80ea25a7171ab8557a449115554e76 upstream. The official LARA-R6 (00B) modem uses 0x908b PID. LARA-R6 00B does not implement a QMI interface on port 4, the reservation (RSVD(4)) has been added to meet other companies that implement QMI on that interface. LARA-R6 00B USB composition exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25USB: serial: option: remove old LARA-R6 PIDDavide Tronchin
commit 2ec106b96afc19698ff934323b633c0729d4c7f8 upstream. Remove the UBLOX_PRODUCT_R6XX 0x90fa association since LARA-R6 00B final product uses a new USB composition with different PID. 0x90fa PID used only by LARA-R6 internal prototypes. Move 0x90fa PID directly in the option_ids array since used by other Qualcomm based modem vendors as pointed out in: https://lore.kernel.org/all/6572c4e6-d8bc-b8d3-4396-d879e4e76338@gmail.com Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25USB: serial: option: add Sierra Wireless EM9191Benoît Monin
commit df3414b0a245f43476061fddd78cee7d6cff797f upstream. Add support for the AT and diag ports, similar to other qualcomm SDX55 modems. In QDL mode, the modem uses a different device ID and support is provided by qcserial in commit 11c52d250b34 ("USB: serial: qcserial: add EM9191 QDL support"). T: Bus=08 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=1199 ProdID=90d3 Rev=00.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM9191 S: SerialNumber=xxxxxxxxxxxxxxxx C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) Signed-off-by: Benoît Monin <benoit.monin@gmx.fr> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03xhci: Remove device endpoints from bandwidth list when freeing the deviceMathias Nyman
commit 5aed5b7c2430ce318a8e62f752f181e66f0d1053 upstream. Endpoints are normally deleted from the bandwidth list when they are dropped, before the virt device is freed. If xHC host is dying or being removed then the endpoints aren't dropped cleanly due to functions returning early to avoid interacting with a non-accessible host controller. So check and delete endpoints that are still on the bandwidth list when freeing the virt device. Solves a list_del corruption kernel crash when unbinding xhci-pci, caused by xhci_mem_cleanup() when it later tried to delete already freed endpoints from the bandwidth list. This only affects hosts that use software bandwidth checking, which currenty is only the xHC in intel Panther Point PCH (Ivy Bridge) Cc: stable@vger.kernel.org Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221024142720.4122053-5-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03usb: bdc: change state when port disconnectedJustin Chen
commit fb8f60dd1b67520e0e0d7978ef17d015690acfc1 upstream. When port is connected and then disconnected, the state stays as configured. Which is incorrect as the port is no longer configured, but in a not attached state. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/1664997235-18198-1-git-send-email-justinpopo6@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03USB: add RESET_RESUME quirk for NVIDIA Jetson devices in RCMHannu Hartikainen
commit fc4ade55c617dc73c7e9756b57f3230b4ff24540 upstream. NVIDIA Jetson devices in Force Recovery mode (RCM) do not support suspending, ie. flashing fails if the device has been suspended. The devices are still visible in lsusb and seem to work otherwise, making the issue hard to debug. This has been discovered in various forum posts, eg. [1]. The patch has been tested on NVIDIA Jetson AGX Xavier, but I'm adding all the Jetson models listed in [2] on the assumption that they all behave similarly. [1]: https://forums.developer.nvidia.com/t/flashing-not-working/72365 [2]: https://docs.nvidia.com/jetson/archives/l4t-archived/l4t-3271/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide/quick_start.html Signed-off-by: Hannu Hartikainen <hannu@hrtk.in> Cc: stable <stable@kernel.org> # after 6.1-rc3 Link: https://lore.kernel.org/r/20220919171610.30484-1-hannu@hrtk.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26usb: idmouse: fix an uninit-value in idmouse_openDongliang Mu
[ Upstream commit bce2b0539933e485d22d6f6f076c0fcd6f185c4c ] In idmouse_create_image, if any ftip_command fails, it will go to the reset label. However, this leads to the data in bulk_in_buffer[HEADER..IMGSIZE] uninitialized. And the check for valid image incurs an uninitialized dereference. Fix this by moving the check before reset label since this check only be valid if the data after bulk_in_buffer[HEADER] has concrete data. Note that this is found by KMSAN, so only kernel compilation is tested. Reported-by: syzbot+79832d33eb89fb3cd092@syzkaller.appspotmail.com Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Link: https://lore.kernel.org/r/20220922134847.1101921-1-dzm91@hust.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26Revert "usb: storage: Add quirk for Samsung Fit flash"sunghwan jung
[ Upstream commit ad5dbfc123e6ffbbde194e2a4603323e09f741ee ] This reverts commit 86d92f5465958752481269348d474414dccb1552, which fix the timeout issue for "Samsung Fit Flash". But the commit affects not only "Samsung Fit Flash" but also other usb storages that use the same controller and causes severe performance regression. # hdparm -t /dev/sda (without the quirk) Timing buffered disk reads: 622 MB in 3.01 seconds = 206.66 MB/sec # hdparm -t /dev/sda (with the quirk) Timing buffered disk reads: 220 MB in 3.00 seconds = 73.32 MB/sec The commit author mentioned that "Issue was reproduced after device has bad block", so this quirk should be applied when we have the timeout issue with a device that has bad blocks. We revert the commit so that we apply this quirk by adding kernel paramters using a bootloader or other ways when we really need it, without the performance regression with devices that don't have the issue. Signed-off-by: sunghwan jung <onenowy@gmail.com> Link: https://lore.kernel.org/r/20220913114913.3073-1-onenowy@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26usb: musb: Fix musb_gadget.c rxstate overflow bugRobin Guo
[ Upstream commit eea4c860c3b366369eff0489d94ee4f0571d467d ] The usb function device call musb_gadget_queue() adds the passed request to musb_ep::req_list,If the (request->length > musb_ep->packet_sz) and (is_buffer_mapped(req) return false),the rxstate() will copy all data in fifo to request->buf which may cause request->buf out of bounds. Fix it by add the length check : fifocnt = min_t(unsigned, request->length - request->actual, fifocnt); Signed-off-by: Robin Guo <guoweibin@inspur.com> Link: https://lore.kernel.org/r/20220906102119.1b071d07a8391ff115e6d1ef@inspur.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()Jianglei Nie
[ Upstream commit 7e271f42a5cc3768cd2622b929ba66859ae21f97 ] xhci_alloc_stream_info() allocates stream context array for stream_info ->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs, stream_info->stream_ctx_array is not released, which will lead to a memory leak. We can fix it by releasing the stream_info->stream_ctx_array with xhci_free_stream_ctx() on the error path to avoid the potential memory leak. Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220921123450.671459-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26USB: serial: qcserial: add new usb-id for Dell branded EM7455Frank Wunderlich
commit eee48781ea199e32c1d0c4732641c494833788ca upstream. Add support for Dell 5811e (EM7455) with USB-id 0x413c:0x81c2. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26USB: serial: ftdi_sio: fix 300 bps rate for SIOJohan Hovold
commit 7bd7ad3c310cd6766f170927381eea0aa6f46c69 upstream. The 300 bps rate of SIO devices has been mapped to 9600 bps since 2003... Let's fix the regression. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26usb: mon: make mmapped memory read onlyTadeusz Struk
commit a659daf63d16aa883be42f3f34ff84235c302198 upstream. Syzbot found an issue in usbmon module, where the user space client can corrupt the monitor's internal memory, causing the usbmon module to crash the kernel with segfault, UAF, etc. The reproducer mmaps the /dev/usbmon memory to user space, and overwrites it with arbitrary data, which causes all kinds of issues. Return an -EPERM error from mon_bin_mmap() if the flag VM_WRTIE is set. Also clear VM_MAYWRITE to make it impossible to change it to writable later. Cc: "Dmitry Vyukov" <dvyukov@google.com> Cc: stable <stable@kernel.org> Fixes: 6f23ee1fefdc ("USB: add binary API to usbmon") Suggested-by: PaX Team <pageexec@freemail.hu> # for the VM_MAYRITE portion Link: https://syzkaller.appspot.com/bug?id=2eb1f35d6525fa4a74d75b4244971e5b1411c95a Reported-by: syzbot+23f57c5ae902429285d7@syzkaller.appspotmail.com Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org> Link: https://lore.kernel.org/r/20220919215957.205681-1-tadeusz.struk@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26uas: ignore UAS for Thinkplus chipsHongling Zeng
commit 0fb9703a3eade0bb84c635705d9c795345e55053 upstream. The UAS mode of Thinkplus(0x17ef, 0x3899) is reported to influence performance and trigger kernel panic on several platforms with the following error message: [ 39.702439] xhci_hcd 0000:0c:00.3: ERROR Transfer event for disabled endpoint or incorrect stream ring [ 39.702442] xhci_hcd 0000:0c:00.3: @000000026c61f810 00000000 00000000 1b000000 05038000 [ 720.545894][13] Workqueue: usb_hub_wq hub_event [ 720.550971][13] ffff88026c143c38 0000000000016300 ffff8802755bb900 ffff880 26cb80000 [ 720.559673][13] ffff88026c144000 ffff88026ca88100 0000000000000000 ffff880 26cb80000 [ 720.568374][13] ffff88026cb80000 ffff88026c143c50 ffffffff8186ae25 ffff880 26ca880f8 [ 720.577076][13] Call Trace: [ 720.580201][13] [<ffffffff8186ae25>] schedule+0x35/0x80 [ 720.586137][13] [<ffffffff8186b0ce>] schedule_preempt_disabled+0xe/0x10 [ 720.593623][13] [<ffffffff8186cb94>] __mutex_lock_slowpath+0x164/0x1e0 [ 720.601012][13] [<ffffffff8186cc3f>] mutex_lock+0x2f/0x40 [ 720.607141][13] [<ffffffff8162b8e9>] usb_disconnect+0x59/0x290 Falling back to USB mass storage can solve this problem, so ignore UAS function of this chip. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn> Link: https://lore.kernel.org/r/1663902249837086.19.seg@mailgw Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26usb-storage: Add Hiksemi USB3-FW to IGNORE_UASHongling Zeng
commit e00b488e813f0f1ad9f778e771b7cd2fe2877023 upstream. The UAS mode of Hiksemi USB_HDD is reported to fail to work on several platforms with the following error message, then after re-connecting the device will be offlined and not working at all. [ 592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD [ 592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00 04 00 00 [ 592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD [ 592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00 00 08 00 These disks have a broken uas implementation, the tag field of the status iu-s is not set properly,so we need to fall-back to usb-storage. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn> Link: https://lore.kernel.org/r/1663901185-21067-1-git-send-email-zenghongling@kylinos.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26uas: add no-uas quirk for Hiksemi usb_diskHongling Zeng
commit a625a4b8806cc1e928b7dd2cca1fee709c9de56e upstream. The UAS mode of Hiksemi is reported to fail to work on several platforms with the following error message, then after re-connecting the device will be offlined and not working at all. [ 592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD [ 592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00 04 00 00 [ 592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD [ 592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00 00 08 00 These disks have a broken uas implementation, the tag field of the status iu-s is not set properly,so we need to fall-back to usb-storage. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn> Link: https://lore.kernel.org/r/1663901173-21020-1-git-send-email-zenghongling@kylinos.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-28USB: core: Fix RST error in hub.cAlan Stern
commit 766a96dc558385be735a370db867e302c8f22153 upstream. A recent commit added an invalid RST expression to a kerneldoc comment in hub.c. The fix is trivial. Fixes: 9c6d778800b9 ("USB: core: Prevent nested device-reset calls") Cc: <stable@vger.kernel.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YxDDcsLtRZ7c20pq@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15usb: dwc3: fix PHY disable sequenceJohan Hovold
commit d2ac7bef95c9ead307801ccb6cb6dfbeb14247bf upstream. Generic PHYs must be powered-off before they can be tore down. Similarly, suspending legacy PHYs after having powered them off makes no sense. Fix the dwc3_core_exit() (e.g. called during suspend) and open-coded dwc3_probe() error-path sequences that got this wrong. Note that this makes dwc3_core_exit() match the dwc3_core_init() error path with respect to powering off the PHYs. Fixes: 03c1fd622f72 ("usb: dwc3: core: add phy cleanup for probe error handling") Fixes: c499ff71ff2a ("usb: dwc3: core: re-factor init and exit paths") Cc: stable@vger.kernel.org # 4.8 Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-2-johan+linaro@kernel.org [ johan: adjust context to 4.9 ] Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15usb: gadget: mass_storage: Fix cdrom data transfers on MAC-OSKrishna Kurapati
commit 9d4dc16ec71bd6368548e9743223e449b4377fc7 upstream. During cdrom emulation, the response to read_toc command must contain the cdrom address as the number of sectors (2048 byte sized blocks) represented either as an absolute value (when MSF bit is '0') or in terms of PMin/PSec/PFrame (when MSF bit is set to '1'). Incase of cdrom, the fsg_lun_open call sets the sector size to 2048 bytes. When MAC OS sends a read_toc request with MSF set to '1', the store_cdrom_address assumes that the address being provided is the LUN size represented in 512 byte sized blocks instead of 2048. It tries to modify the address further to convert it to 2048 byte sized blocks and store it in MSF format. This results in data transfer failures as the cdrom address being provided in the read_toc response is incorrect. Fixes: 3f565a363cee ("usb: gadget: storage: adapt logic block size to bound block devices") Cc: stable@vger.kernel.org Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Link: https://lore.kernel.org/r/1661570110-19127-1-git-send-email-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15USB: core: Prevent nested device-reset callsAlan Stern
commit 9c6d778800b921bde3bff3cff5003d1650f942d1 upstream. Automatic kernel fuzzing revealed a recursive locking violation in usb-storage: ============================================ WARNING: possible recursive locking detected 5.18.0 #3 Not tainted -------------------------------------------- kworker/1:3/1205 is trying to acquire lock: ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at: usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 but task is already holding lock: ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at: usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 ... stack backtrace: CPU: 1 PID: 1205 Comm: kworker/1:3 Not tainted 5.18.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2988 [inline] check_deadlock kernel/locking/lockdep.c:3031 [inline] validate_chain kernel/locking/lockdep.c:3816 [inline] __lock_acquire.cold+0x152/0x3ca kernel/locking/lockdep.c:5053 lock_acquire kernel/locking/lockdep.c:5665 [inline] lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5630 __mutex_lock_common kernel/locking/mutex.c:603 [inline] __mutex_lock+0x14f/0x1610 kernel/locking/mutex.c:747 usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 usb_reset_device+0x37d/0x9a0 drivers/usb/core/hub.c:6109 r871xu_dev_remove+0x21a/0x270 drivers/staging/rtl8712/usb_intf.c:622 usb_unbind_interface+0x1bd/0x890 drivers/usb/core/driver.c:458 device_remove drivers/base/dd.c:545 [inline] device_remove+0x11f/0x170 drivers/base/dd.c:537 __device_release_driver drivers/base/dd.c:1222 [inline] device_release_driver_internal+0x1a7/0x2f0 drivers/base/dd.c:1248 usb_driver_release_interface+0x102/0x180 drivers/usb/core/driver.c:627 usb_forced_unbind_intf+0x4d/0xa0 drivers/usb/core/driver.c:1118 usb_reset_device+0x39b/0x9a0 drivers/usb/core/hub.c:6114 This turned out not to be an error in usb-storage but rather a nested device reset attempt. That is, as the rtl8712 driver was being unbound from a composite device in preparation for an unrelated USB reset (that driver does not have pre_reset or post_reset callbacks), its ->remove routine called usb_reset_device() -- thus nesting one reset call within another. Performing a reset as part of disconnect processing is a questionable practice at best. However, the bug report points out that the USB core does not have any protection against nested resets. Adding a reset_in_progress flag and testing it will prevent such errors in the future. Link: https://lore.kernel.org/all/CAB7eexKUpvX-JNiLzhXBDWgfg2T9e9_0Tw4HQ6keN==voRbP0g@mail.gmail.com/ Cc: stable@vger.kernel.org Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YwkflDxvg0KWqyZK@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15usb-storage: Add ignore-residue quirk for NXP PN7462AUWitold Lipieta
commit 2aa48857ad52236a9564c71183d6cc8893becd41 upstream. This is USB mass storage primary boot loader for code download on NXP PN7462AU. Without the quirk it is impossible to write whole memory at once as device restarts during the write due to bogus residue values reported. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Witold Lipieta <witold.lipieta@thaumatec.com> Link: https://lore.kernel.org/r/20220809112911.462776-1-witold.lipieta@thaumatec.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15USB: cdc-acm: Add Icom PMR F3400 support (0c26:0020)Thierry GUIBERT
commit a10bc71729b236fe36de0d8e4d35c959fd8dec3a upstream. Supports for ICOM F3400 and ICOM F4400 PMR radios in CDC-ACM driver enabling the AT serial port. The Vendor Id is 0x0C26 The Product ID is 0x0020 Output of lsusb : Bus 001 Device 009: ID 0c26:0020 Prolific Technology Inc. ICOM Radio Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0c26 Prolific Technology Inc. idProduct 0x0020 bcdDevice 0.00 iManufacturer 1 ICOM Inc. iProduct 2 ICOM Radio iSerial 3 *obfuscated* bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0030 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 12 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Signed-off-by: Thierry GUIBERT <thierry.guibert@croix-rouge.fr> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220819081702.84118-1-thierry.guibert@croix-rouge.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15USB: serial: option: add support for Cinterion MV32-WA/WB RmNet modeSlark Xiao
commit 8ffe20d08f2c95d702c453020d03a4c568a988f0 upstream. We added PIDs for MV32-WA/WB MBIM mode before, now we need to add support for RmNet mode. Test evidence as below: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f3 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F3 USB Mobile Broadband S: SerialNumber=d7b4be8d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f4 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F4 USB Mobile Broadband S: SerialNumber=d095087d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by: Slark Xiao <slark_xiao@163.com> [ johan: sort entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15USB: serial: option: add support for OPPO R11 diag portYan Xinyu
commit 8d5fc280392735e4441b35de14f2f4860fa8d83c upstream. Add support for OPPO R11 USB diag serial port to option driver. This phone uses Qualcomm Snapdragon 660 SoC. usb-devices output: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22d9 ProdID=276c Rev=04.04 S: Manufacturer=OPPO S: Product=SDM660-MTP _SN:09C6BCA7 S: SerialNumber=beb2c403 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs Signed-off-by: Yan Xinyu <sdlyyxy@bupt.edu.cn> Link: https://lore.kernel.org/r/20220714102037.4113889-1-sdlyyxy@bupt.edu.cn Link: https://lore.kernel.org/r/Yt1WfSZk03Plpnan@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15USB: serial: cp210x: add Decagon UCA device idJohan Hovold
commit ceb4038472a4803e7046ed488b03d11551991514 upstream. Add the device id for Decagon Devices USB Cable Adapter. Link: https://lore.kernel.org/r/trinity-819f9db2-d3e1-40e9-a669-9c245817c046-1661523546680@msvc-mesg-web108 Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15xhci: Add grace period after xHC start to prevent premature runtime suspend.Mathias Nyman
commit 33e321586e37b642ad10594b9ef25a613555cd08 upstream. After xHC controller is started, either in probe or resume, it can take a while before any of the connected usb devices are visible to the roothub due to link training. It's possible xhci driver loads, sees no acivity and suspends the host before the USB device is visible. In one testcase with a hotplugged xHC controller the host finally detected the connected USB device and generated a wake 500ms after host initial start. If hosts didn't suspend the device duringe training it probablty wouldn't take up to 500ms to detect it, but looking at specs reveal USB3 link training has a couple long timeout values, such as 120ms RxDetectQuietTimeout, and 360ms PollingLFPSTimeout. So Add a 500ms grace period that keeps polling the roothub for 500ms after start, preventing runtime suspend until USB devices are detected. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220825150840.132216-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15USB: serial: ftdi_sio: add Omron CS1W-CIF31 device idNiek Nooijens
commit 001047ea241a9646010b2744451dfbc7289542f3 upstream. works perfectly with: modprobe ftdi_sio echo "0590 00b2" | tee /sys/module/ftdi_sio/drivers/usb-serial\:ftdi_sio/new_id > /dev/null but doing this every reboot is a pain in the ass. Signed-off-by: Niek Nooijens <niek.nooijens@omron.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25gadgetfs: ep_io - wait until IRQ finishesJozef Martiniak
[ Upstream commit 04cb742d4d8f30dc2e83b46ac317eec09191c68e ] after usb_ep_queue() if wait_for_completion_interruptible() is interrupted we need to wait until IRQ gets finished. Otherwise complete() from epio_complete() can corrupt stack. Signed-off-by: Jozef Martiniak <jomajm@gmail.com> Link: https://lore.kernel.org/r/20220708070645.6130-1-jomajm@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25usb: host: ohci-ppc-of: Fix refcount leak bugLiang He
[ Upstream commit 40a959d7042bb7711e404ad2318b30e9f92c6b9b ] In ohci_hcd_ppc_of_probe(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220617034637.4003115-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25USB: HCD: Fix URB giveback issue in tasklet functionWeitao Wang
commit 26c6c2f8a907c9e3a2f24990552a4d77235791e6 upstream. Usb core introduce the mechanism of giveback of URB in tasklet context to reduce hardware interrupt handling time. On some test situation(such as FIO with 4KB block size), when tasklet callback function called to giveback URB, interrupt handler add URB node to the bh->head list also. If check bh->head list again after finish all URB giveback of local_list, then it may introduce a "dynamic balance" between giveback URB and add URB to bh->head list. This tasklet callback function may not exit for a long time, which will cause other tasklet function calls to be delayed. Some real-time applications(such as KB and Mouse) will see noticeable lag. In order to prevent the tasklet function from occupying the cpu for a long time at a time, new URBS will not be added to the local_list even though the bh->head list is not empty. But also need to ensure the left URB giveback to be processed in time, so add a member high_prio for structure giveback_urb_bh to prioritize tasklet and schelule this tasklet again if bh->head list is not empty. At the same time, we are able to prioritize tasklet through structure member high_prio. So, replace the local high_prio_bh variable with this structure member in usb_hcd_giveback_urb. Fixes: 94dfd7edfd5c ("USB: HCD: support giveback of URB in tasklet context") Cc: stable <stable@kernel.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com> Link: https://lore.kernel.org/r/20220726074918.5114-1-WeitaoWang-oc@zhaoxin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-21usb: dwc3: gadget: Fix event pending checkThinh Nguyen
commit 7441b273388b9a59d8387a03ffbbca9d5af6348c upstream. The DWC3_EVENT_PENDING flag is used to protect against invalid call to top-half interrupt handler, which can occur when there's a delay in software detection of the interrupt line deassertion. However, the clearing of this flag was done prior to unmasking the interrupt line, creating opportunity where the top-half handler can come. This breaks the serialization and creates a race between the top-half and bottom-half handler, resulting in losing synchronization between the controller and the driver when processing events. To fix this, make sure the clearing of the DWC3_EVENT_PENDING is done at the end of the bottom-half handler. Fixes: d325a1de49d6 ("usb: dwc3: gadget: Prevent losing events in event cache") Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/8670aaf1cf52e7d1e6df2a827af2d77263b93b75.1656380429.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-21USB: serial: ftdi_sio: add Belimo device idsLucien Buchmann
commit 7c239a071d1f04b7137789810807b4108d475c72 upstream. Those two product ids are known. Signed-off-by: Lucien Buchmann <lucien.buchmann@gmx.net> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-02usb: chipidea: udc: check request status before setting device addressXu Yang
commit b24346a240b36cfc4df194d145463874985aa29b upstream. The complete() function may be called even though request is not completed. In this case, it's necessary to check request status so as not to set device address wrongly. Fixes: 10775eb17bee ("usb: chipidea: udc: update gadget states according to ch9") cc: <stable@vger.kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20220623030242.41796-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-02USB: serial: option: add Telit LE910Cx 0x1250 compositionCarlo Lobrano
commit 342fc0c3b345525da21112bd0478a0dc741598ea upstream. Add support for the following Telit LE910Cx composition: 0x1250: rmnet, tty, tty, tty, tty Reviewed-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com> Link: https://lore.kernel.org/r/20220614075623.2392607-1-c.lobrano@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-25usb: gadget: lpc32xx_udc: Fix refcount leak in lpc32xx_udc_probeMiaoqian Lin
commit 4757c9ade34178b351580133771f510b5ffcf9c8 upstream. of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() will check NULL pointer. Fixes: 24a28e428351 ("USB: gadget driver for LPC32xx") Cc: stable <stable@kernel.org> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220603140246.64529-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-25USB: serial: io_ti: add Agilent E5805A supportRobert Eckelmann
commit 908e698f2149c3d6a67d9ae15c75545a3f392559 upstream. Add support for Agilent E5805A (rebranded ION Edgeport/4) to io_ti. Signed-off-by: Robert Eckelmann <longnoserob@gmail.com> Link: https://lore.kernel.org/r/20220521230808.30931eca@octoberrain Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-25USB: serial: option: add support for Cinterion MV31 with new baselineSlark Xiao
commit 158f7585bfcea4aae0ad4128d032a80fec550df1 upstream. Adding support for Cinterion device MV31 with Qualcomm new baseline. Use different PIDs to separate it from previous base line products. All interfaces settings keep same as previous. Below is test evidence: T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00b8 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B8 USB Mobile Broadband S: SerialNumber=90418e79 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00b9 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B9 USB Mobile Broadband S: SerialNumber=90418e79 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option For PID 00b8, interface 3 is GNSS port which don't use serial driver. Signed-off-by: Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20220601034740.5438-1-slark_xiao@163.com [ johan: rename defines using a "2" infix ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-14usb: dwc2: gadget: don't reset gadget's driver->busMarek Szyprowski
[ Upstream commit 3120aac6d0ecd9accf56894aeac0e265f74d3d5a ] UDC driver should not touch gadget's driver internals, especially it should not reset driver->bus. This wasn't harmful so far, but since commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") gadget subsystem got it's own bus and messing with ->bus triggers the following NULL pointer dereference: dwc2 12480000.hsotg: bound driver g_ether 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: ... CPU: 0 PID: 620 Comm: modprobe Not tainted 5.18.0-rc5-next-20220504 #11862 Hardware name: Samsung Exynos (Flattened Device Tree) PC is at module_add_driver+0x44/0xe8 LR is at sysfs_do_create_link_sd+0x84/0xe0 ... Process modprobe (pid: 620, stack limit = 0x(ptrval)) ... module_add_driver from bus_add_driver+0xf4/0x1e4 bus_add_driver from driver_register+0x78/0x10c driver_register from usb_gadget_register_driver_owner+0x40/0xb4 usb_gadget_register_driver_owner from do_one_initcall+0x44/0x1e0 do_one_initcall from do_init_module+0x44/0x1c8 do_init_module from load_module+0x19b8/0x1b9c load_module from sys_finit_module+0xdc/0xfc sys_finit_module from ret_fast_syscall+0x0/0x54 Exception stack(0xf1771fa8 to 0xf1771ff0) ... dwc2 12480000.hsotg: new device is high-speed ---[ end trace 0000000000000000 ]--- Fix this by removing driver->bus entry reset. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20220505104618.22729-1-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14USB: hcd-pci: Fully suspend across freeze/thaw cycleEvan Green
[ Upstream commit 63acaa8e9c65dc34dc249440216f8e977f5d2748 ] The documentation for the freeze() method says that it "should quiesce the device so that it doesn't generate IRQs or DMA". The unspoken consequence of not doing this is that MSIs aimed at non-boot CPUs may get fully lost if they're sent during the period where the target CPU is offline. The current callbacks for USB HCD do not fully quiesce interrupts, specifically on XHCI. Change to use the full suspend/resume flow for freeze/thaw to ensure interrupts are fully quiesced. This fixes issues where USB devices fail to thaw during hibernation because XHCI misses its interrupt and cannot recover. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20220421103751.v3.2.I8226c7fdae88329ef70957b96a39b346c69a914e@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14drivers: usb: host: Fix deadlock in oxu_bus_suspend()Duoming Zhou
[ Upstream commit 4d378f2ae58138d4c55684e1d274e7dd94aa6524 ] There is a deadlock in oxu_bus_suspend(), which is shown below: (Thread 1) | (Thread 2) | timer_action() oxu_bus_suspend() | mod_timer() spin_lock_irq() //(1) | (wait a time) ... | oxu_watchdog() del_timer_sync() | spin_lock_irq() //(2) (wait timer to stop) | ... We hold oxu->lock in position (1) of thread 1, and use del_timer_sync() to wait timer to stop, but timer handler also need oxu->lock in position (2) of thread 2. As a result, oxu_bus_suspend() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irq(), which could let timer handler to obtain the needed lock. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220417120305.64577-1-duoming@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14USB: host: isp116x: check return value after calling platform_get_resource()Zhen Ni
[ Upstream commit 134a3408c2d3f7e23eb0e4556e0a2d9f36c2614e ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Zhen Ni <nizhen@uniontech.com> Link: https://lore.kernel.org/r/20220302033716.31272-1-nizhen@uniontech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14USB: storage: karma: fix rio_karma_init returnLin Ma
[ Upstream commit b92ffb1eddd9a66a90defc556dcbf65a43c196c7 ] The function rio_karam_init() should return -ENOMEM instead of value 0 (USB_STOR_TRANSPORT_GOOD) when allocation fails. Similarly, it should return -EIO when rio_karma_send_command() fails. Fixes: dfe0d3ba20e8 ("USB Storage: add rio karma eject support") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lin Ma <linma@zju.edu.cn> Link: https://lore.kernel.org/r/20220412144359.28447-1-linma@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.51.0) at 2026-10-15 03:43:32 +0000