summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget/function
AgeCommit message (Collapse)Author
2017-03-30usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerIntervalRoger Quadros
commit 09424c50b7dff40cb30011c09114404a4656e023 upstream. The streaming_maxburst module parameter is 0 offset (0..15) so we must add 1 while using it for wBytesPerInterval calculation for the SuperSpeed companion descriptor. Without this host uvcvideo driver will always see the wrong wBytesPerInterval for SuperSpeed uvc gadget and may not find a suitable video interface endpoint. e.g. for streaming_maxburst = 0 case it will always fail as wBytePerInterval was evaluating to 0. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-30ACM gadget: fix endianness in notificationsOliver Neukum
commit cdd7928df0d2efaa3270d711963773a08a4cc8ab upstream. The gadget code exports the bitfield for serial status changes over the wire in its internal endianness. The fix is to convert to little endian before sending it over the wire. Signed-off-by: Oliver Neukum <oneukum@suse.com> Tested-by: 家瑋 <momo1208@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-18Revert "usb: gadget: uvc: Add missing call for additional setup data"Roger Quadros
commit eb38d913c27f32f4df173791051fecf6aca34173 upstream. This reverts commit 4fbac5206afd01b717d4bdc58793d471f3391b4b. This commit breaks g_webcam when used with uvc-gadget [1]. The user space application (e.g. uvc-gadget) is responsible for sending response to UVC class specific requests on control endpoint in uvc_send_response() in uvc_v4l2.c. The bad commit was causing a duplicate response to be sent with incorrect response data thus causing UVC probe to fail at the host and broken control transfer endpoint at the gadget. [1] - git://git.ideasonboard.org/uvc-gadget.git Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-18usb: gadget: function: f_fs: pass companion descriptor alongFelipe Balbi
commit 2bfa0719ac2a9b2f3c91345873d3cdebd0296ba9 upstream. If we're dealing with SuperSpeed endpoints, we need to make sure to pass along the companion descriptor and initialize fields needed by the Gadget API. Eventually, f_fs.c should be converted to use config_ep_by_speed() like all other functions, though. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-12usb: gadget: f_hid: fix: Move IN request allocation to set_alt()Krzysztof Opasiak
commit 749494b6bdbbaf0899aa1c62a1ad74cd747bce47 upstream. Since commit: ba1582f22231 ("usb: gadget: f_hid: use alloc_ep_req()") we cannot allocate any requests in bind() as we check if we should align request buffer based on endpoint descriptor which is assigned in set_alt(). Allocating request in bind() function causes a NULL pointer dereference. This commit moves allocation of IN request from bind() to set_alt() to prevent this issue. Fixes: ba1582f22231 ("usb: gadget: f_hid: use alloc_ep_req()") Tested-by: David Lechner <david@lechnology.com> Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-12usb: gadget: f_hid: Use spinlock instead of mutexKrzysztof Opasiak
commit 33e4c1a9987a1fc3b42c3b534100b5b006d55c61 upstream. As IN request has to be allocated in set_alt() and released in disable() we cannot use mutex to protect it as we cannot sleep in those funcitons. Let's replace this mutex with a spinlock. Tested-by: David Lechner <david@lechnology.com> Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-12usb: gadget: f_hid: fix: Prevent accessing released memoryKrzysztof Opasiak
commit aa65d11aa008f4de58a9cee7e121666d9d68505e upstream. When we unlock our spinlock to copy data to user we may get disabled by USB host and free the whole list of completed out requests including the one from which we are copying the data to user memory. To prevent from this let's remove our working element from the list and place it back only if there is sth left when we finish with it. Fixes: 99c515005857 ("usb: gadget: hidg: register OUT INT endpoint for SET_REPORT") Tested-by: David Lechner <david@lechnology.com> Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-12usb: gadget: f_hid: fix: Free out requestsKrzysztof Opasiak
commit 20d2ca955bd09639c7b01db5761d157c297aea0a upstream. Requests for out endpoint are allocated in bind() function but never released. This commit ensures that all pending requests are released when we disable out endpoint. Fixes: 99c515005857 ("usb: gadget: hidg: register OUT INT endpoint for SET_REPORT") Tested-by: David Lechner <david@lechnology.com> Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25usb: gadget: f_fs: Assorted buffer overflow checks.Vincent Pelletier
OS descriptor head, when flagged as provided, is accessed without checking if it fits in provided buffer. Verify length before access. Also, there are other places where buffer length it checked after accessing offsets which are potentially past the end. Check buffer length before as well to fail cleanly. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-12usb: gadget: f_fs: Fix iterations on endpoints.Vincent Pelletier
When zero endpoints are declared for a function, there is no endpoint to disable, enable or free, so replace do...while loops with while loops. Change pre-decrement to post-decrement to iterate the same number of times when there are endpoints to process. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-03usb: gadget: Fix copy/pasted error messageDavid Lechner
This fixes an error message that was probably copied and pasted. The same message is used for both the in and out endpoints, so it makes it impossible to know which one actually failed because both cases say "IN". Make the out endpoint error message say "OUT". Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: gadget: f_fs: Fix possibe deadlockBaolin Wang
When system try to close /dev/usb-ffs/adb/ep0 on one core, at the same time another core try to attach new UDC, which will cause deadlock as below scenario. Thus we should release ffs lock before issuing unregister_gadget_item(). [ 52.642225] c1 ====================================================== [ 52.642228] c1 [ INFO: possible circular locking dependency detected ] [ 52.642236] c1 4.4.6+ #1 Tainted: G W O [ 52.642241] c1 ------------------------------------------------------- [ 52.642245] c1 usb ffs open/2808 is trying to acquire lock: [ 52.642270] c0 (udc_lock){+.+.+.}, at: [<ffffffc00065aeec>] usb_gadget_unregister_driver+0x3c/0xc8 [ 52.642272] c1 but task is already holding lock: [ 52.642283] c0 (ffs_lock){+.+.+.}, at: [<ffffffc00066b244>] ffs_data_clear+0x30/0x140 [ 52.642285] c1 which lock already depends on the new lock. [ 52.642287] c1 the existing dependency chain (in reverse order) is: [ 52.642295] c0 -> #1 (ffs_lock){+.+.+.}: [ 52.642307] c0 [<ffffffc00012340c>] __lock_acquire+0x20f0/0x2238 [ 52.642314] c0 [<ffffffc000123b54>] lock_acquire+0xe4/0x298 [ 52.642322] c0 [<ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc [ 52.642328] c0 [<ffffffc00066f7bc>] ffs_func_bind+0x504/0x6e8 [ 52.642334] c0 [<ffffffc000654004>] usb_add_function+0x84/0x184 [ 52.642340] c0 [<ffffffc000658ca4>] configfs_composite_bind+0x264/0x39c [ 52.642346] c0 [<ffffffc00065b348>] udc_bind_to_driver+0x58/0x11c [ 52.642352] c0 [<ffffffc00065b49c>] usb_udc_attach_driver+0x90/0xc8 [ 52.642358] c0 [<ffffffc0006598e0>] gadget_dev_desc_UDC_store+0xd4/0x128 [ 52.642369] c0 [<ffffffc0002c14e8>] configfs_write_file+0xd0/0x13c [ 52.642376] c0 [<ffffffc00023c054>] vfs_write+0xb8/0x214 [ 52.642381] c0 [<ffffffc00023cad4>] SyS_write+0x54/0xb0 [ 52.642388] c0 [<ffffffc000085ff0>] el0_svc_naked+0x24/0x28 [ 52.642395] c0 -> #0 (udc_lock){+.+.+.}: [ 52.642401] c0 [<ffffffc00011e3d0>] print_circular_bug+0x84/0x2e4 [ 52.642407] c0 [<ffffffc000123454>] __lock_acquire+0x2138/0x2238 [ 52.642412] c0 [<ffffffc000123b54>] lock_acquire+0xe4/0x298 [ 52.642420] c0 [<ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc [ 52.642427] c0 [<ffffffc00065aeec>] usb_gadget_unregister_driver+0x3c/0xc8 [ 52.642432] c0 [<ffffffc00065995c>] unregister_gadget_item+0x28/0x44 [ 52.642439] c0 [<ffffffc00066b34c>] ffs_data_clear+0x138/0x140 [ 52.642444] c0 [<ffffffc00066b374>] ffs_data_reset+0x20/0x6c [ 52.642450] c0 [<ffffffc00066efd0>] ffs_data_closed+0xac/0x12c [ 52.642454] c0 [<ffffffc00066f070>] ffs_ep0_release+0x20/0x2c [ 52.642460] c0 [<ffffffc00023dbe4>] __fput+0xb0/0x1f4 [ 52.642466] c0 [<ffffffc00023dd9c>] ____fput+0x20/0x2c [ 52.642473] c0 [<ffffffc0000ee944>] task_work_run+0xb4/0xe8 [ 52.642482] c0 [<ffffffc0000cd45c>] do_exit+0x360/0xb9c [ 52.642487] c0 [<ffffffc0000cf228>] do_group_exit+0x4c/0xb0 [ 52.642494] c0 [<ffffffc0000dd3c8>] get_signal+0x380/0x89c [ 52.642501] c0 [<ffffffc00008a8f0>] do_signal+0x154/0x518 [ 52.642507] c0 [<ffffffc00008af00>] do_notify_resume+0x70/0x78 [ 52.642512] c0 [<ffffffc000085ee8>] work_pending+0x1c/0x20 [ 52.642514] c1 other info that might help us debug this: [ 52.642517] c1 Possible unsafe locking scenario: [ 52.642518] c1 CPU0 CPU1 [ 52.642520] c1 ---- ---- [ 52.642525] c0 lock(ffs_lock); [ 52.642529] c0 lock(udc_lock); [ 52.642533] c0 lock(ffs_lock); [ 52.642537] c0 lock(udc_lock); [ 52.642539] c1 *** DEADLOCK *** [ 52.642543] c1 1 lock held by usb ffs open/2808: [ 52.642555] c0 #0: (ffs_lock){+.+.+.}, at: [<ffffffc00066b244>] ffs_data_clear+0x30/0x140 [ 52.642557] c1 stack backtrace: [ 52.642563] c1 CPU: 1 PID: 2808 Comm: usb ffs open Tainted: G [ 52.642565] c1 Hardware name: Spreadtrum SP9860g Board (DT) [ 52.642568] c1 Call trace: [ 52.642573] c1 [<ffffffc00008b430>] dump_backtrace+0x0/0x170 [ 52.642577] c1 [<ffffffc00008b5c0>] show_stack+0x20/0x28 [ 52.642583] c1 [<ffffffc000422694>] dump_stack+0xa8/0xe0 [ 52.642587] c1 [<ffffffc00011e548>] print_circular_bug+0x1fc/0x2e4 [ 52.642591] c1 [<ffffffc000123454>] __lock_acquire+0x2138/0x2238 [ 52.642595] c1 [<ffffffc000123b54>] lock_acquire+0xe4/0x298 [ 52.642599] c1 [<ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc [ 52.642604] c1 [<ffffffc00065aeec>] usb_gadget_unregister_driver+0x3c/0xc8 [ 52.642608] c1 [<ffffffc00065995c>] unregister_gadget_item+0x28/0x44 [ 52.642613] c1 [<ffffffc00066b34c>] ffs_data_clear+0x138/0x140 [ 52.642618] c1 [<ffffffc00066b374>] ffs_data_reset+0x20/0x6c [ 52.642621] c1 [<ffffffc00066efd0>] ffs_data_closed+0xac/0x12c [ 52.642625] c1 [<ffffffc00066f070>] ffs_ep0_release+0x20/0x2c [ 52.642629] c1 [<ffffffc00023dbe4>] __fput+0xb0/0x1f4 [ 52.642633] c1 [<ffffffc00023dd9c>] ____fput+0x20/0x2c [ 52.642636] c1 [<ffffffc0000ee944>] task_work_run+0xb4/0xe8 [ 52.642640] c1 [<ffffffc0000cd45c>] do_exit+0x360/0xb9c [ 52.642644] c1 [<ffffffc0000cf228>] do_group_exit+0x4c/0xb0 [ 52.642647] c1 [<ffffffc0000dd3c8>] get_signal+0x380/0x89c [ 52.642651] c1 [<ffffffc00008a8f0>] do_signal+0x154/0x518 [ 52.642656] c1 [<ffffffc00008af00>] do_notify_resume+0x70/0x78 [ 52.642659] c1 [<ffffffc000085ee8>] work_pending+0x1c/0x20 Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: gadget: f_fs: Fix ExtCompat descriptor validationVincent Pelletier
Reserved1 is documented as expected to be set to 0, but this test fails when it it set to 0. Reverse the condition. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: gadget: f_fs: Document eventfd effect on descriptor format.Vincent Pelletier
When FUNCTIONFS_EVENTFD flag is set, __ffs_data_got_descs reads a 32bits, little-endian value right after the fixed structure header, and passes it to eventfd_ctx_fdget. Document this. Also, rephrase a comment to be affirmative about the role of string descriptor at index 0. Ref: USB 2.0 spec paragraph "9.6.7 String", and also checked to still be current in USB 3.0 spec paragraph "9.6.9 String". Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-12-25ktime: Cleanup ktime_set() usageThomas Gleixner
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-21Merge branch 'scsi-target-for-v4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux Pull scsi target cleanups from Bart Van Assche: "The changes here are: - a few small bug fixes for the iSCSI and user space target drivers. - minimize the target build time by about 30% by rearranging #include directives - fix the second argument passed to percpu_ida_alloc() - reduce the number of false positive warnings reported by sparse These patches pass Wu Fengguang's build bot tests and also the linux-next tests" * 'scsi-target-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux: iscsi-target: Return error if unable to add network portal target: Fix spelling mistake and unwrap multi-line text target/iscsi: Fix double free in lio_target_tiqn_addtpg() target/user: Fix use-after-free of tcmu_cmds if they are expired target: Minimize #include directives target/user: Add an #include directive cxgbit: Add an #include directive ibmvscsi_tgt: Add two #include directives sbp-target: Add an #include directive qla2xxx: Add an #include directive configfs: Minimize #include directives usb: gadget: Fix second argument of percpu_ida_alloc() sbp-target: Fix second argument of percpu_ida_alloc() target/user: Fix a data type in tcmu_queue_cmd() target: Use NULL instead of 0 to represent a pointer
2016-12-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: - more ->d_init() stuff (work.dcache) - pathname resolution cleanups (work.namei) - a few missing iov_iter primitives - copy_from_iter_full() and friends. Either copy the full requested amount, advance the iterator and return true, or fail, return false and do _not_ advance the iterator. Quite a few open-coded callers converted (and became more readable and harder to fuck up that way) (work.iov_iter) - several assorted patches, the big one being logfs removal * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: logfs: remove from tree vfs: fix put_compat_statfs64() does not handle errors namei: fold should_follow_link() with the step into not-followed link namei: pass both WALK_GET and WALK_MORE to should_follow_link() namei: invert WALK_PUT logics namei: shift interpretation of LOOKUP_FOLLOW inside should_follow_link() namei: saner calling conventions for mountpoint_last() namei.c: get rid of user_path_parent() switch getfrag callbacks to ..._full() primitives make skb_add_data,{_nocache}() and skb_copy_to_page_nocache() advance only on success [iov_iter] new primitives - copy_from_iter_full() and friends don't open-code file_inode() ceph: switch to use of ->d_init() ceph: unify dentry_operations instances lustre: switch to use of ->d_init()
2016-12-14idr: add ida_is_emptyMatthew Wilcox
Two of the USB Gadgets were poking around in the internals of struct ida in order to determine if it is empty. Add the appropriate abstraction. Link: http://lkml.kernel.org/r/1480369871-5271-63-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Konstantin Khlebnikov <koct9i@gmail.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14Merge tag 'configfs-for-4.10' of git://git.infradead.org/users/hch/configfsLinus Torvalds
Pull configfs update from Christoph Hellwig: "Just one simple change from Andrzej to drop the pointless return value from the ->drop_link method" * tag 'configfs-for-4.10' of git://git.infradead.org/users/hch/configfs: fs: configfs: don't return anything from drop_link
2016-12-13Merge tag 'usb-4.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here's the big set of USB/PHY patches for 4.10-rc1. A number of new drivers are here in this set of changes. We have a new USB controller type "mtu3", a new usb-serial driver, and the usual churn in the gadget subsystem and the xhci host controller driver, along with a few other new small drivers added. And lots of little other changes all over the USB and PHY driver tree. Full details are in the shortlog All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (309 commits) USB: serial: option: add dlink dwm-158 USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041 USB: OHCI: nxp: fix code warnings USB: OHCI: nxp: remove useless extern declaration USB: OHCI: at91: remove useless extern declaration usb: misc: rio500: fix result type for error message usb: mtu3: fix U3 port link issue usb: mtu3: enable auto switch from U3 to U2 usbip: fix warning in vhci_hcd_probe/lockdep_init_map usb: core: usbport: Use proper LED API to fix potential crash usbip: add missing compile time generated files to .gitignore usb: hcd.h: construct hub class request constants from simpler constants USB: OHCI: ohci-pxa27x: remove useless functions USB: OHCI: omap: remove useless extern declaration USB: OHCI: ohci-omap: remove useless functions USB: OHCI: ohci-s3c2410: remove useless functions USB: cdc-acm: add device id for GW Instek AFG-125 fsl/usb: Workarourd for USB erratum-A005697 usb: hub: Wait for connection to be reestablished after port reset usbip: vudc: Refactor init_vudc_hw() to be more obvious ...
2016-12-09usb: gadget: Fix second argument of percpu_ida_alloc()Bart Van Assche
Pass a task state as second argument to percpu_ida_alloc(). Fixes: commit 71e7ae8e1fb2 ("usb-gadget/tcm: Conversion to percpu_ida tag pre-allocation") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-12-05[iov_iter] new primitives - copy_from_iter_full() and friendsAl Viro
copy_from_iter_full(), copy_from_iter_full_nocache() and csum_and_copy_from_iter_full() - counterparts of copy_from_iter() et.al., advancing iterator only in case of successful full copy and returning whether it had been successful or not. Convert some obvious users. *NOTE* - do not blindly assume that something is a good candidate for those unless you are sure that not advancing iov_iter in failure case is the right thing in this case. Anything that does short read/short write kind of stuff (or is in a loop, etc.) is unlikely to be a good one. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-01fs: configfs: don't return anything from drop_linkAndrzej Pietrasiewicz
Documentation/filesystems/configfs/configfs.txt says: "When unlink(2) is called on the symbolic link, the source item is notified via the ->drop_link() method. Like the ->drop_item() method, this is a void function and cannot return failure." The ->drop_item() is indeed a void function, the ->drop_link() is actually not. This, together with the fact that the value of ->drop_link() is silently ignored suggests, that it is the ->drop_link() return type that should be corrected and changed to void. This patch changes drop_link() signature and all its users. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> [hch: reverted reformatting of some code] Signed-off-by: Christoph Hellwig <hch@lst.de>
2016-11-28Merge 4.9-rc7 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
udplite conflict is resolved by taking what 'net-next' did which removed the backlog receive method assignment, since it is no longer necessary. Two entries were added to the non-priv ethtool operations switch statement, one in 'net' and one in 'net-next, so simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-18Merge tag 'usb-for-v4.10' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.10 merge window One big merge this time with a total of 166 non-merge commits. Most of the work, by far, is on dwc2 this time (68.2%) with dwc3 a far second (22.5%). The remaining 9.3% are scattered on gadget drivers. The most important changes for dwc2 are the peripheral side DMA support implemented by Synopsys folks and support for the new IOT dwc2 compatible core from Synopsys. In dwc3 land we have support for high-bandwidth, high-speed isochronous endpoints and some non-critical fixes for large scatter lists. Apart from these, we have our usual set of cleanups, non-critical fixes, etc.
2016-11-18usb: gadget: serial: fix possible Oops caused by calling kthread_stop(NULL)Felix Hädicke
Add check for NULL before calling kthread_stop(). There were cases in which gserial_console_exit() was called, but the console thread was not started. This resulted in an invalid kthread_stop(NULL) call. Without this, the following Oops may occur: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffffb3ca1166>] kthread_stop+0x16/0x110 ... CPU: 2 PID: 853 Comm: rmmod Not tainted 4.9.0-rc5 #3 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z77 Extreme3, BIOS P1.50 07/11/2013 task: ffff880419f6a100 task.stack: ffffc90002e8c000 RIP: 0010:[<ffffffffb3ca1166>] [<ffffffffb3ca1166>] kthread_stop+0x16/0x110 RSP: 0018:ffffc90002e8fdb0 EFLAGS: 00010286 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000246 RDI: 0000000000000000 RBP: ffffc90002e8fdc8 R08: 0000000000000000 R09: 0000000000000001 R10: 000000000000019d R11: 000000000000001f R12: 0000000000000000 R13: ffff88041b8d8400 R14: 0000000000000001 R15: 000055fd59f5a1e0 FS: 00007f82500be700(0000) GS:ffff88042f280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000041bee2000 CR4: 00000000001406e0 Stack: 0000000000000000 ffffffffc0b8e720 ffff88041b8d8400 ffffc90002e8fdf0 ffffffffc0b8bb52 ffff88041a106300 0000000000000001 ffff880419fc2ea8 ffffc90002e8fe08 ffffffffc0aed749 ffffffffc0aef600 ffffc90002e8fe20 Call Trace: [<ffffffffc0b8bb52>] gserial_free_line+0x72/0xb0 [u_serial] [<ffffffffc0aed749>] acm_free_instance+0x19/0x30 [usb_f_acm] [<ffffffffc0b01b40>] usb_put_function_instance+0x20/0x30 [libcomposite] [<ffffffffc04a603b>] gs_unbind+0x3b/0x70 [g_serial] [<ffffffffc0b018d1>] __composite_unbind+0x61/0xb0 [libcomposite] [<ffffffffc0b01933>] composite_unbind+0x13/0x20 [libcomposite] [<ffffffffc08ef1ad>] usb_gadget_remove_driver+0x3d/0x90 [udc_core] [<ffffffffc08ef26e>] usb_gadget_unregister_driver+0x6e/0xc0 [udc_core] [<ffffffffc0aff6d2>] usb_composite_unregister+0x12/0x20 [libcomposite] [<ffffffffc04a6268>] cleanup+0x10/0xda8 [g_serial] [<ffffffffb3d0c0c2>] SyS_delete_module+0x192/0x270 [<ffffffffb3c032a0>] ? exit_to_usermode_loop+0x90/0xb0 [<ffffffffb4228a3b>] entry_SYSCALL_64_fastpath+0x1e/0xad Code: 89 c6 e8 6e ff ff ff 48 89 df e8 06 bd fd ff 5b 5d c3 0f 1f 00 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 49 89 fc 53 0f 1f 44 00 00 <f0> 41 ff 44 24 18 4c 89 e7 e8 bc f1 ff ff 48 85 c0 48 89 c3 74 RIP [<ffffffffb3ca1166>] kthread_stop+0x16/0x110 RSP <ffffc90002e8fdb0> CR2: 0000000000000018 ---[ end trace 5b3336a407e1698c ]--- Signed-off-by: Felix Hädicke <felixhaedicke@web.de> Tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: gadget: Fix checkpatch error for bracesAnson Jacob
Fix error message by checkpath.pl open brace '{' following struct/enum go on the same line Patch applied by running fix inplace capability of checkpatch: checkpatch.pl -f *.[ch] --types OPEN_BRACE --fix-inplace Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: gadget: f_uac2: fix error handling at afunc_bindPeter Chen
The current error handling flow uses incorrect goto label, fix it Cc: <stable@vger.kernel.org> Fixes: d12a8727171c ("usb: gadget: function: Remove redundant usb_free_all_descriptors") Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: gadget: f_fs: fix wrong parenthesis in ffs_func_req_match()Felix Hädicke
Properly check the return code of ffs_func_revmap_intf() and ffs_func_revmap_ep() for a non-negative value. Instead of checking the return code, the comparison was performed for the last parameter of the function calls, because of wrong parenthesis. This also fixes the following static checker warning: drivers/usb/gadget/function/f_fs.c:3152 ffs_func_req_match() warn: always true condition '(((creq->wIndex)) >= 0) => (0-u16max >= 0)' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felix Hädicke <felixhaedicke@web.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several cases of bug fixes in 'net' overlapping other changes in 'net-next-. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-14Merge 4.9-rc5 into usb-nextGreg Kroah-Hartman
We want/need the USB fixes in here as well, for testing and merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-08usb: gadget: f_hid add super speed supportJanusz Dziedzic
Add super speed descriptors to f_hid. Signed-off-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-03usb: gadget: NCM: differentiate consumed packets from dropped packetsTorsten Polle
dev_kfree_skb_any() is used to free packets that are dropped by the network stack. Therefore the function should not be used for packets that have been successfully processed by the network stack. Instead dev_consume_skb_any() has to be used for such consumed packets. This separation helps to identify dropped packets. Signed-off-by: Torsten Polle <tpolle@de.adit-jv.com> Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-03usb: gadget: u_ether: link socket buffers to the device for received packetsTorsten Polle
Socket buffers should be linked to the (network) device that allocated the buffers. __netdev_alloc_skb performs this task. Signed-off-by: Torsten Polle <tpolle@de.adit-jv.com> Signed-off-by: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-03usb: gadget: NCM: link socket buffers to the device for tx packetsTorsten Polle
Socket buffers should be linked to the (network) device that allocated the buffers. Signed-off-by: Torsten Polle <tpolle@de.adit-jv.com> Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-03usb: gadget: f_fs: use complete() instead complete_all()Daniel Wagner
There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The usage pattern of the completion is: waiter context waker context reinit_completion() usb_esp_queue() wait_for_completion_interruptible() ffs_ep0_complete() complete() Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Felipe Balbi <balbi@kernel.org> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-03usb: Convert pr_warning to pr_warnJoe Perches
Use the more common logging mechanism. Miscellanea: o Realign multiline statements o Coalesce format Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-01usb: gadget: u_ether: remove interrupt throttlingFelipe Balbi
According to Dave Miller "the networking stack has a hard requirement that all SKBs which are transmitted must have their completion signalled in a fininte amount of time. This is because, until the SKB is freed by the driver, it holds onto socket, netfilter, and other subsystem resources." In summary, this means that using TX IRQ throttling for the networking gadgets is, at least, complex and we should avoid it for the time being. Cc: <stable@vger.kernel.org> Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-31usb: gadget: composite: always set ep->mult to a sensible valueFelipe Balbi
ep->mult is supposed to be set to Isochronous and Interrupt Endapoint's multiplier value. This value is computed from different places depending on the link speed. If we're dealing with HighSpeed, then it's part of bits [12:11] of wMaxPacketSize. This case wasn't taken into consideration before. While at that, also make sure the ep->mult defaults to one so drivers can use it unconditionally and assume they'll never multiply ep->maxpacket to zero. Cc: <stable@vger.kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30Merge 4.9-rc3 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-24usb: Convert pr_warning to pr_warnJoe Perches
Use the more common logging mechanism. Miscellanea: o Realign multiline statements o Coalesce format Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-20net: use core MTU range checking in misc driversJarod Wilson
firewire-net: - set min/max_mtu - remove fwnet_change_mtu nes: - set max_mtu - clean up nes_netdev_change_mtu xpnet: - set min/max_mtu - remove xpnet_dev_change_mtu hippi: - set min/max_mtu - remove hippi_change_mtu batman-adv: - set max_mtu - remove batadv_interface_change_mtu - initialization is a little async, not 100% certain that max_mtu is set in the optimal place, don't have hardware to test with rionet: - set min/max_mtu - remove rionet_change_mtu slip: - set min/max_mtu - streamline sl_change_mtu um/net_kern: - remove pointless ndo_change_mtu hsi/clients/ssi_protocol: - use core MTU range checking - remove now redundant ssip_pn_set_mtu ipoib: - set a default max MTU value - Note: ipoib's actual max MTU can vary, depending on if the device is in connected mode or not, so we'll just set the max_mtu value to the max possible, and let the ndo_change_mtu function continue to validate any new MTU change requests with checks for CM or not. Note that ipoib has no min_mtu set, and thus, the network core's mtu > 0 check is the only lower bounds here. mptlan: - use net core MTU range checking - remove now redundant mpt_lan_change_mtu fddi: - min_mtu = 21, max_mtu = 4470 - remove now redundant fddi_change_mtu (including export) fjes: - min_mtu = 8192, max_mtu = 65536 - The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to get past the core net MTU range checks so fjes_change_mtu can validate a new MTU against what it supports (see fjes_support_mtu in fjes_hw.c) hsr: - min_mtu = 0 (calls ether_setup, max_mtu is 1500) f_phonet: - min_mtu = 6, max_mtu = 65541 u_ether: - min_mtu = 14, max_mtu = 15412 phonet/pep-gprs: - min_mtu = 576, max_mtu = 65530 - remove redundant gprs_set_mtu CC: netdev@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: Stefan Richter <stefanr@s5r6.in-berlin.de> CC: Faisal Latif <faisal.latif@intel.com> CC: linux-rdma@vger.kernel.org CC: Cliff Whickman <cpw@sgi.com> CC: Robin Holt <robinmholt@gmail.com> CC: Jes Sorensen <jes@trained-monkey.org> CC: Marek Lindner <mareklindner@neomailbox.ch> CC: Simon Wunderlich <sw@simonwunderlich.de> CC: Antonio Quartulli <a@unstable.cc> CC: Sathya Prakash <sathya.prakash@broadcom.com> CC: Chaitra P B <chaitra.basappa@broadcom.com> CC: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> CC: MPT-FusionLinux.pdl@broadcom.com CC: Sebastian Reichel <sre@kernel.org> CC: Felipe Balbi <balbi@kernel.org> CC: Arvid Brodin <arvid.brodin@alten.se> CC: Remi Denis-Courmont <courmisch@gmail.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17usb: gadget: f_fs: stop sleeping in ffs_func_eps_disableMichal Nazarewicz
ffs_func_eps_disable is called from atomic context so it cannot sleep thus cannot grab a mutex. Change the handling of epfile->read_buffer to use non-sleeping synchronisation method. Reported-by: Chen Yu <chenyu56@huawei.com> Signed-off-by: Michał Nazarewicz <mina86@mina86.com> Fixes: 9353afbbfa7b ("buffer data from ‘oversized’ OUT requests") Tested-by: John Stultz <john.stultz@linaro.org> Tested-by: Chen Yu <chenyu56@huawei.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-17usb: gadget: f_fs: edit epfile->ep under lockMichal Nazarewicz
epfile->ep is protected by ffs->eps_lock (not epfile->mutex) so clear it while holding the spin lock. Tested-by: John Stultz <john.stultz@linaro.org> Tested-by: Chen Yu <chenyu56@huawei.com> Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-17usb: gadget: function: u_ether: don't starve tx request queueFelipe Balbi
If we don't guarantee that we will always get an interrupt at least when we're queueing our very last request, we could fall into situation where we queue every request with 'no_interrupt' set. This will cause the link to get stuck. The behavior above has been triggered with g_ether and dwc3. Cc: <stable@vger.kernel.org> Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: ">rename2() work from Miklos + current_time() from Deepa" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Replace current_fs_time() with current_time() fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps fs: Replace CURRENT_TIME with current_time() for inode timestamps fs: proc: Delete inode time initializations in proc_alloc_inode() vfs: Add current_time() api vfs: add note about i_op->rename changes to porting fs: rename "rename2" i_op to "rename" vfs: remove unused i_op->rename fs: make remaining filesystems use .rename2 libfs: support RENAME_NOREPLACE in simple_rename() fs: support RENAME_NOREPLACE for local filesystems ncpfs: fix unused variable warning
2016-09-27fs: Replace CURRENT_TIME with current_time() for inode timestampsDeepa Dinamani
CURRENT_TIME macro is not appropriate for filesystems as it doesn't use the right granularity for filesystem timestamps. Use current_time() instead. CURRENT_TIME is also not y2038 safe. This is also in preparation for the patch that transitions vfs timestamps to use 64 bit time and hence make them y2038 safe. As part of the effort current_time() will be extended to do range checks. Hence, it is necessary for all file system timestamps to use current_time(). Also, current_time() will be transitioned along with vfs to be y2038 safe. Note that whenever a single call to current_time() is used to change timestamps in different inodes, it is because they share the same time granularity. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Felipe Balbi <balbi@kernel.org> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: David Sterba <dsterba@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-19Revert "usb: gadget: NCM: Protect dev->port_usb using dev->lock"Greg Kroah-Hartman
This reverts commit c9ffc78745f89e300fe704348dd8e6800acf4d18 as it was reported to be broken. Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Jim Baxter <jim_baxter@mentor.com> Cc: Harish Jenny K N <harish_kandiga@mentor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.51.0) at 2026-10-15 05:17:18 +0000