| Age | Commit message (Collapse) | Author |
|---|
|
If a target disconnects during a PIO data transfer the command may fail
when the target reconnects:
scsi host1: DMA length is zero!
scsi host1: cur adr[04380000] len[00000000]
The scsi bus is then reset. This happens because the residual reached
zero before the transfer was completed.
The usual residual calculation relies on the Transfer Count registers.
That works for DMA transfers but not for PIO transfers. Fix the problem
by storing the PIO transfer residual and using that to correctly
calculate bytes_sent.
Fixes: 6fe07aaffbf0 ("[SCSI] m68k: new mac_esp scsi driver")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The core driver, esp_scsi, does not use the ESP_CONFIG2_FENAB bit, so the
chip's Transfer Counter register is only 16 bits wide (not 24). A larger
transfer cannot work and will theoretically result in a failed command
and a "DMA length is zero" error.
Fixes: 3109e5ae0311 ("scsi: zorro_esp: New driver for Amiga Zorro NCR53C9x boards")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Cc: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Convert the driver from the legacy pci_* DMA API to the generic DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We need to transfer device ownership to the CPU before we can manipulate
the mapped data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We can't just transfer ownership to the CPU and then unmap, as this will
break with swiotlb.
Instead unmap the command and sense buffer a little earlier in the I/O
completion handler and get rid of the pci_dma_sync_sg_for_cpu call
entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove the list wrappers, including the pointless list iteration before
deletion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch adds support for the Mylex DAC960 RAID controller,
supporting the newer, SCSI-based interface. The driver is a
re-implementation of the original DAC960 driver.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch adds support for the Mylex DAC960 RAID controller,
supporting the older, block-based interface only. The driver is a
re-implementation of the original DAC960 driver.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
drivers/scsi/advansys.c: In function 'adv_isr_callback':
drivers/scsi/advansys.c:5952:6: warning:
variable 'srb_tag' set but not used [-Wunused-but-set-variable]
It never used since introduction in
commit 9c17c62aedb0 ("advansys: use shared host tag map for command lookup")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This message floods the log when enabling mask 0x7 for
/proc/sys/dev/scsi/logging_level:
xxxxxxxx kernel: scsi_block_when_processing_errors: rtn: 1
It's not needed and makes tracing just scsi_eh* messages way too
verbose so get rid of it.
[mkp: mangled patch, applied by hand]
Signed-off-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Chad Dupuis <chad.dupuis@cavium.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is currently a bug with the driver where there is never a call to
target_sess_cmd_list_set_waiting(), it only called
target_wait_for_sess_cmd(), which basically means that the sess_wait_list
would always be empty.
Thus, list_empty(&sess->sess_wait_list) = true,
(eg: no se_cmd I/O is quiesced, because no se_cmd in sess_wait_list),
since commit 712db3eb2c35 ("scsi: ibmvscsis: Properly deregister
target sessions") in 4.9.y code.
ibmvscsi_tgt does not remove the I_T Nexus when a VM is active so we can
fix this issue by removing the call to target_wait_for_sess_cmd()
altogether.
Signed-off-by: Bryant G. Ly <bly@catalogicsoftware.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
With commit 10e5e37581fc ("scsi: ufs: Add clock ungating to a separate
workqueue"), clock gating work was moved to a separate work queue with
WQ_MEM_RECLAIM set, since clock gating could occur from a memory reclaim
context. Unfortunately, clk_gating.gate_work was left queued via
schedule_delayed_work, which is a system workqueue that does not have
WQ_MEM_RECLAIM set. Because ufshcd_ungate_work attempts to cancel
gate_work, the following warning appears:
[ 14.174170] workqueue: WQ_MEM_RECLAIM ufs_clk_gating_0:ufshcd_ungate_work is flushing !WQ_MEM_RECLAIM events:ufshcd_gate_work
[ 14.174179] WARNING: CPU: 4 PID: 173 at kernel/workqueue.c:2440 check_flush_dependency+0x110/0x118
[ 14.205725] CPU: 4 PID: 173 Comm: kworker/u16:3 Not tainted 4.14.68 #1
[ 14.212437] Hardware name: Google Cheza (rev1) (DT)
[ 14.217459] Workqueue: ufs_clk_gating_0 ufshcd_ungate_work
[ 14.223107] task: ffffffc0f6a40080 task.stack: ffffff800a490000
[ 14.229195] PC is at check_flush_dependency+0x110/0x118
[ 14.234569] LR is at check_flush_dependency+0x110/0x118
[ 14.239944] pc : [<ffffff80080cad14>] lr : [<ffffff80080cad14>] pstate: 60c001c9
[ 14.333050] Call trace:
[ 14.427767] [<ffffff80080cad14>] check_flush_dependency+0x110/0x118
[ 14.434219] [<ffffff80080cafec>] start_flush_work+0xac/0x1fc
[ 14.440046] [<ffffff80080caeec>] flush_work+0x40/0x94
[ 14.445246] [<ffffff80080cb288>] __cancel_work_timer+0x11c/0x1b8
[ 14.451433] [<ffffff80080cb4b8>] cancel_delayed_work_sync+0x20/0x30
[ 14.457886] [<ffffff80085b9294>] ufshcd_ungate_work+0x24/0xd0
[ 14.463800] [<ffffff80080cfb04>] process_one_work+0x32c/0x690
[ 14.469713] [<ffffff80080d0154>] worker_thread+0x218/0x338
[ 14.475361] [<ffffff80080d527c>] kthread+0x120/0x130
[ 14.480470] [<ffffff8008084814>] ret_from_fork+0x10/0x18
The simple solution is to put the gate_work on the same WQ_MEM_RECLAIM
work queue as the ungate_work.
Fixes: 10e5e37581fc ("scsi: ufs: Add clock ungating to a separate workqueue")
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/lpfc/lpfc_debugfs.c: In function 'lpfc_debugfs_nodelist_data':
drivers/scsi/lpfc/lpfc_debugfs.c:553:29: warning:
variable 'tgtp' set but not used [-Wunused-but-set-variable]
It never used since 2b65e18202fd ("scsi: lpfc: NVME Target: Add debugfs support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 114988 ("Missing break in switch")
Addresses-Coverity-ID: 114989 ("Missing break in switch")
Addresses-Coverity-ID: 114990 ("Missing break in switch")
Addresses-Coverity-ID: 114991 ("Missing break in switch")
Addresses-Coverity-ID: 114992 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Clang warns when one enumerated type is implicitly converted to another.
drivers/scsi/iscsi_tcp.c:803:15: warning: implicit conversion from
enumeration type 'enum iscsi_host_param' to different enumeration type
'enum iscsi_param' [-Wenum-conversion]
&addr, param, buf);
^~~~~
1 warning generated.
iscsi_conn_get_addr_param handles ISCSI_HOST_PARAM_IPADDRESS just fine
so add an explicit cast to iscsi_param to make it clear to Clang that
this is expected behavior.
Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/lpfc/lpfc_hbadisc.c: In function 'lpfc_free_tx':
drivers/scsi/lpfc/lpfc_hbadisc.c:5431:19: warning:
variable 'psli' set but not used [-Wunused-but-set-variable]
Since commit 895427bd012c ("scsi: lpfc: NVME Initiator: Base modifications")
'psli' is not used any more.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Clang warns when one enumerated type is implicitly converted to another.
drivers/scsi/bfa/bfa_fcs_lport.c:379:26: warning: implicit conversion
from enumeration type 'enum bfa_lport_aen_event' to different
enumeration type 'enum bfa_ioc_aen_event' [-Wenum-conversion]
BFA_AEN_CAT_LPORT, event);
^~~~~
The root cause of these warnings is the bfad_im_post_vendor_event
function, which expects a value from enum bfa_ioc_aen_event but there
are multiple instances of values from enums bfa_port_aen_event,
bfa_audit_aen_event, and bfa_lport_aen_event being used in this
function.
Given that this doesn't appear to be a problem since cat helps with
differentiating the events, just change evt's type to int so that no
conversion needs to happen and Clang won't warn. Update aen_type's type
in bfa_aen_entry_s as members that hold enumerated types should be int.
Link: https://github.com/ClangBuiltLinux/linux/issues/147
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Clang warns when an enumerated type is implicitly converted to another.
drivers/scsi/isci/request.c:3476:13: warning: implicit conversion from
enumeration type 'enum sci_task_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
status = sci_controller_start_task(ihost,
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/isci/host.c:2744:10: warning: implicit conversion from
enumeration type 'enum sci_status' to different enumeration type 'enum
sci_task_status' [-Wenum-conversion]
return SCI_SUCCESS;
~~~~~~ ^~~~~~~~~~~
drivers/scsi/isci/host.c:2753:9: warning: implicit conversion from
enumeration type 'enum sci_status' to different enumeration type 'enum
sci_task_status' [-Wenum-conversion]
return status;
~~~~~~ ^~~~~~
Avoid all of these implicit conversion by just making
sci_controller_start_task use sci_status. This silences
Clang and has no functional change since sci_task_status
has all of its values mapped to something in sci_status.
Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Clang warns when one enumerated type is implicitly converted to another.
drivers/scsi/isci/request.c:1629:13: warning: implicit conversion from
enumeration type 'enum sci_io_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
status = SCI_IO_FAILURE_RESPONSE_VALID;
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/isci/request.c:1631:12: warning: implicit conversion from
enumeration type 'enum sci_io_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
status = SCI_IO_FAILURE_RESPONSE_VALID;
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
status is of type sci_status but SCI_IO_FAILURE_RESPONSE_VALID is of
type sci_io_status. Use SCI_FAILURE_IO_RESPONSE_VALID, which is from
sci_status and has SCI_IO_FAILURE_RESPONSE_VALID's exact value since
that is what SCI_IO_FAILURE_RESPONSE_VALID is mapped to in the isci.h
file.
Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/lpfc/lpfc_sli.c: In function 'lpfc_sli4_sp_handle_rcqe':
drivers/scsi/lpfc/lpfc_sli.c:13430:26: warning:
variable 'fc_hdr' set but not used [-Wunused-but-set-variable]
drivers/scsi/lpfc/lpfc_sli.c: In function 'lpfc_cq_create':
drivers/scsi/lpfc/lpfc_sli.c:14852:11: warning:
variable 'hw_page_size' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add IEEE and CEE DCBX support for iSCSI connections.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/megaraid/megaraid_mbox.c: In function 'megaraid_reset_handler':
drivers/scsi/megaraid/megaraid_mbox.c:2580:7: warning:
variable 'recovering' set but not used [-Wunused-but-set-variable]
drivers/scsi/megaraid/megaraid_mbox.c: In function 'mbox_post_sync_cmd':
drivers/scsi/megaraid/megaraid_mbox.c:2728:12: warning:
variable 'mbox64' set but not used [-Wunused-but-set-variable]
drivers/scsi/megaraid/megaraid_mbox.c: In function 'megaraid_mbox_support_random_del':
drivers/scsi/megaraid/megaraid_mbox.c:3138:11: warning:
variable 'mbox' set but not used [-Wunused-but-set-variable]
drivers/scsi/megaraid/megaraid_mbox.c: In function 'megaraid_mbox_flush_cache':
drivers/scsi/megaraid/megaraid_mbox.c:3266:10: warning:
variable 'mbox' set but not used [-Wunused-but-set-variable]
drivers/scsi/megaraid/megaraid_mbox.c: In function 'megaraid_mbox_fire_sync_cmd':
drivers/scsi/megaraid/megaraid_mbox.c:3302:12: warning:
variable 'mbox64' set but not used [-Wunused-but-set-variable]
drivers/scsi/megaraid/megaraid_mbox.c: In function 'gather_hbainfo':
drivers/scsi/megaraid/megaraid_mbox.c:3797:10: warning:
variable 'dmajor' set but not used [-Wunused-but-set-variable]
[mkp: applied by hand due to conflict with hch's DMA cleanup]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Clang generates a warning when it sees a logical not followed by a
conditional operator like ==, >, or < because it thinks that the logical
not should be applied to the whole statement:
drivers/scsi/qla2xxx/qla_nx.c:3702:7: warning: logical not is only
applied to the left hand side of this comparison
[-Wlogical-not-parentheses]
if (!qla2x00_eh_wait_for_pending_commands(vha, 0, 0,
^
drivers/scsi/qla2xxx/qla_nx.c:3702:7: note: add parentheses after the
'!' to evaluate the comparison first
if (!qla2x00_eh_wait_for_pending_commands(vha, 0, 0,
^
(
drivers/scsi/qla2xxx/qla_nx.c:3702:7: note: add parentheses around left
hand side expression to silence this warning
if (!qla2x00_eh_wait_for_pending_commands(vha, 0, 0,
^
(
1 warning generated.
It assumes the author might have made a mistake in their logic:
if (!a == b) -> if (!(a == b))
Sometimes that is the case; other times, it's just a super convoluted
way of saying 'if (a)' when b = 0:
if (!1 == 0) -> if (0 == 0) -> if (true)
Alternatively:
if (!1 == 0) -> if (!!1) -> if (1)
Simplify this comparison so that Clang doesn't complain.
Link: https://github.com/ClangBuiltLinux/linux/issues/80
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Clang warns when a variable is assigned to itself.
drivers/scsi/bfa/bfa_fcbuild.c:199:6: warning: explicitly assigning
value of variable of type 'int' to itself [-Wself-assign]
len = len;
~~~ ^ ~~~
drivers/scsi/bfa/bfa_fcbuild.c:838:6: warning: explicitly assigning
value of variable of type 'int' to itself [-Wself-assign]
len = len;
~~~ ^ ~~~
drivers/scsi/bfa/bfa_fcbuild.c:917:6: warning: explicitly assigning
value of variable of type 'int' to itself [-Wself-assign]
len = len;
~~~ ^ ~~~
drivers/scsi/bfa/bfa_fcbuild.c:981:6: warning: explicitly assigning
value of variable of type 'int' to itself [-Wself-assign]
len = len;
~~~ ^ ~~~
drivers/scsi/bfa/bfa_fcbuild.c:1008:6: warning: explicitly assigning
value of variable of type 'int' to itself [-Wself-assign]
len = len;
~~~ ^ ~~~
5 warnings generated.
This construct is usually used to avoid unused variable warnings, which
I assume is the case here. -Wunused-parameter is hidden behind -Wextra
with GCC 4.6, which is the minimum version to compile the kernel as of
commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6").
However, upon further inspection, these functions aren't actually used
anywhere; they're just defined. Rather than just removing the self
assignments, remove all of this dead code.
Link: https://github.com/ClangBuiltLinux/linux/issues/148
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Clang warns when a variable is assigned to itself.
drivers/scsi/qla2xxx/qla_mbx.c:1514:4: warning: explicitly assigning
value of variable of type 'uint64_t' (aka 'unsigned long long') to
itself [-Wself-assign]
l = l;
~ ^ ~
1 warning generated.
This construct is usually used to avoid unused variable warnings, which
I assume is the case here. -Wunused-parameter is hidden behind -Wextra
with GCC 4.6, which is the minimum version to compile the kernel as of
commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6").
Just remove this line to silence Clang.
Link: https://github.com/ClangBuiltLinux/linux/issues/83
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/arcmsr/arcmsr_hba.c: In function 'arcmsr_drain_donequeue':
drivers/scsi/arcmsr/arcmsr_hba.c:1320:10: warning:
variable 'lun' set but not used [-Wunused-but-set-variable]
drivers/scsi/arcmsr/arcmsr_hba.c:1320:6: warning:
variable 'id' set but not used [-Wunused-but-set-variable]
Never used since introduction in commit ae52e7f09ff5 ("arcmsr: Support 1024 scatter-gather list entries and improve AP while FW trapped and behaviors of EHs").
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In megasas_mgmt_compat_ioctl_fw(), to handle the structure
compat_megasas_iocpacket 'cioc', a user-space structure megasas_iocpacket
'ioc' is allocated before megasas_mgmt_ioctl_fw() is invoked to handle
the packet. Since the two data structures have different fields, the data
is copied from 'cioc' to 'ioc' field by field. In the copy process,
'sense_ptr' is prepared if the field 'sense_len' is not null, because it
will be used in megasas_mgmt_ioctl_fw(). To prepare 'sense_ptr', the
user-space data 'ioc->sense_off' and 'cioc->sense_off' are copied and
saved to kernel-space variables 'local_sense_off' and 'user_sense_off'
respectively. Given that 'ioc->sense_off' is also copied from
'cioc->sense_off', 'local_sense_off' and 'user_sense_off' should have the
same value. However, 'cioc' is in the user space and a malicious user can
race to change the value of 'cioc->sense_off' after it is copied to
'ioc->sense_off' but before it is copied to 'user_sense_off'. By doing
so, the attacker can inject different values into 'local_sense_off' and
'user_sense_off'. This can cause undefined behavior in the following
execution, because the two variables are supposed to be same.
This patch enforces a check on the two kernel variables 'local_sense_off'
and 'user_sense_off' to make sure they are the same after the copy. In
case they are not, an error code EINVAL will be returned.
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Trivial fix to spelling mistake in beiscsi_log message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Trivial fix to spelling mistake in lpfc_printf_log message text.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently a spin_unlock_irqrestore() call is missing on the error path,
so add it.
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We just need to free the request here. Additionally, this is currently
wrong for a queue that's using MQ currently, it'll crash.
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This is currently wrong since it isn't dependent on if we're using mq or
not. At least now it'll be correct when we force mq.
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add missing break statement in order to prevent the code from falling
through to case TEST_UNIT_READY.
Addresses-Coverity-ID: 1357338 ("Missing break in switch")
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update registers as follows:
- Default value of AIP timer is 1ms, and it is easy for some expanders to
cause IO error. Change the value to max value 65ms to avoid IO error for
those expanders.
- A CQ completion will be reported by HW when 4 CQs have occurred or the
aging timer expires, whichever happens first. Sor serial IO scenario, it
will still wait 8us for every IO before it is reported. So in the
situation, the performance is poor. So to improve it, change the limit
time to the least value.
For other scenario, it does little affect to the performance.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently we use the IPTT defined in LLDD to identify IOs. Actually for
IOs which are from the block layer, they have tags to identify them. So
for those IOs, use tag of the block layer directly, and for IOs which is
not from the block layer (such as internal IOs from libsas/LLDD), reserve
96 IPTTs for them.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The interrupts of ent72 and ent74 are not processed by PCIe AER handling,
so we need to unmask the interrupts and process them first in the driver.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If an SSP/SMP IO times out, it may be actually in reality be
simultaneously processing completion of the slot in
slot_complete_vx_hw().
Then if the slot is freed in slot_complete_vx_hw() (this IPTT is freed
and it may be re-used by other slot), and we may abort the wrong slot in
hisi_sas_abort_task().
So to solve the issue, free the slot after the check of
SAS_TASK_STATE_ABORTED in slot_complete_vx_hw().
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
SMP/internal IO
If SMP/internal IO times out, we will possibly free the task immediately.
However if the IO actually completes at the same time, the IO completion
may refer to task which has been freed.
So to solve the issue, flush the tasklet to finish IO completion before
free'ing slot/task.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In evaluating hisi_hba, the sas_port may be NULL, so for safety relocate
the the check to value possible NULL deference.
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
At directly attached situation, if the user modifies the sysfs interface
of maximum_linkrate and minimum_linkrate to renegotiate the linkrate
between SAS controller and target, the value of both files mentioned
above should have change to user setting after renegotiate is over, but
it remains unchanged.
To fix this bug, maximum_linkrate and minimum_linkrate will be directly
fed back to relevant sas_phy structure.
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When we fail to analyse the payload of a PRLI response we should reset
the state machine to retry the PRLI; eventually we will be getting a
proper frame. Not doing so will result in a stuck state machine and the
port never to be presented to the systsm.
Suggested-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Arun Easi <arun.easi@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We should not assume the payload of a PRLI or PLOGI respons is always
present.
Signed-off-by: Thomas Abraham <tabraham@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Arun Easi <arun.easi@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When an RSCN gets delayed (or not being sent at all), the transport class
will detect an error, EH kicks in, and eventually will be setting the
device to offline. If we receive an RSCN after that, the device will
stay in 'offline'. This patch allows for an 'offline' to 'blocked'
transition, thereby allowing the device to become active again.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The dma_addr_t member is unused ever since we switched the SCSI
layer to send down single-segement command using a scatterlist
as well many years ago.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Except for the mac_esp driver, which uses PIO or pseudo DMA, all drivers
share the same dma mapping calls. Move the dma mapping into the core
code using the scsi_dma_map / scsi_dma_unmap helpers, with a special
identify mapping variant triggered off a new ESP_FLAG_NO_DMA_MAP flag
for mac_esp.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We can simplify use esp->dev now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
esp->dev is a void pointer that points either to a struct device, or a
struct platform_device. As we can easily get from the device to the
platform_device if needed change it to always point to a struct device
and properly type the pointer to avoid errors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
esp_sbus_map_command_block is called straight from the probe routine
without any locks held, so we can safely use GFP_KERNEL here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove usage of the legacy PCI DMA API. To make this easier we also
store a struct device instead of pci_dev in the dev field of struct
esp.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Per Qcom's UFS host controller HW design, the UFS Tx lane1 clock could be
muxed with Tx lane0 clock, hence keep Tx lane1 clock optional by ignoring
it if it is not provided in device tree. This change also performs some
cleanup to lanes per direction checks when enable/disable lane clocks
just for symmetry.
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
