summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2023-07-11pinctrl: at91-pio4: check return value of devm_kasprintf()Claudiu Beznea
[ Upstream commit f6fd5d4ff8ca0b24cee1af4130bcb1fa96b61aa0 ] devm_kasprintf() returns a pointer to dynamically allocated memory. Pointer could be NULL in case allocation fails. Check pointer validity. Identified with coccinelle (kmerr.cocci script). Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller") Depends-on: 1c4e5c470a56 ("pinctrl: at91: use devm_kasprintf() to avoid potential leaks") Depends-on: 5a8f9cf269e8 ("pinctrl: at91-pio4: use proper format specifier for unsigned int") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230615105333.585304-4-claudiu.beznea@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11pinctrl: microchip-sgpio: check return value of devm_kasprintf()Claudiu Beznea
[ Upstream commit 310cd4c206cd04696ccbfd1927b5ab6973e8cc8e ] devm_kasprintf() returns a pointer to dynamically allocated memory. Pointer could be NULL in case allocation fails. Check pointer validity. Identified with coccinelle (kmerr.cocci script). Fixes: 7e5ea974e61c ("pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230615105333.585304-3-claudiu.beznea@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11pinctrl: freescale: Fix a memory out of bounds when num_configs is 1Xiaolei Wang
[ Upstream commit 9063777ca1e2e895c5fdd493ee0c3f18fa710ed4 ] The config passed in by pad wakeup is 1, when num_configs is 1, Configuration [1] should not be fetched, which will be detected by KASAN as a memory out of bounds condition. Modify to get configs[1] when num_configs is 2. Fixes: f60c9eac54af ("gpio: mxc: enable pad wakeup on i.MX8x platforms") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20230504233736.3766296-1-xiaolei.wang@windriver.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11pinctrl: npcm7xx: Add missing check for ioremapJiasheng Jiang
[ Upstream commit ad64639417161e90b30dda00486570eb150aeee5 ] Add check for ioremap() and return the error if it fails in order to guarantee the success of ioremap(). Fixes: 3b588e43ee5c ("pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230607095829.1345-1-jiasheng@iscas.ac.cn Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11pinctrl:sunplus: Add check for kmallocWells Lu
[ Upstream commit 73f8ce7f961afcb3be49352efeb7c26cc1c00cc4 ] Fix Smatch static checker warning: potential null dereference 'configs'. (kmalloc returns null) Changes in v2: 1. Add free allocated memory before returned -ENOMEM. 2. Add call of_node_put() before returned -ENOMEM. Fixes: aa74c44be19c ("pinctrl: Add driver for Sunplus SP7021") Signed-off-by: Wells Lu <wellslutw@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/1685277277-12209-1-git-send-email-wellslutw@gmail.com [Rebased on the patch from Lu Hongfei] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11pinctrl: cherryview: Return correct value if pin in push-pull modeAndy Shevchenko
[ Upstream commit 5835196a17be5cfdcad0b617f90cf4abe16951a4 ] Currently the getter returns ENOTSUPP on pin configured in the push-pull mode. Fix this by adding the missed switch case. Fixes: ccdf81d08dbe ("pinctrl: cherryview: add option to set open-drain pin config") Fixes: 6e08d6bbebeb ("pinctrl: Add Intel Cherryview/Braswell pin controller support") Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11pinctrl: tegra: Duplicate pinmux functions tableThierry Reding
[ Upstream commit fad57233501beb5bd25f037cb9128a533e710600 ] The function table is filled with group information based on other instance-specific data at runtime. However, the function table can be shared between multiple instances, causing the ->probe() function for one instance to overwrite the table of a previously probed instance. Fix this by sharing only the function names and allocating a separate function table for each instance. Fixes: 5a0047360743 ("pinctrl: tegra: Separate Tegra194 instances") Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20230530105308.1292852-1-thierry.reding@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11pinctrl: sunplus: Add check for kmallocWells Lu
[ Upstream commit a5961bed5429cf1134d7f539b4ed60317012f84d ] Fix Smatch static checker warning: potential null dereference 'configs'. (kmalloc returns null) Fixes: aa74c44be19c ("pinctrl: Add driver for Sunplus SP7021") Signed-off-by: Wells Lu <wellslutw@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/1685277277-12209-1-git-send-email-wellslutw@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11pinctrl: at91: fix a couple NULL vs IS_ERR() checksDan Carpenter
[ Upstream commit 35216718c9ac2aef934ea9cd229572d4996807b2 ] The devm_kasprintf_strarray() function doesn't return NULL on error, it returns error pointers. Update the checks accordingly. Fixes: f494c1913cbb ("pinctrl: at91: use devm_kasprintf() to avoid potential leaks (part 2)") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ryan Wanner <ryan.wanner@microchip.com> Link: https://lore.kernel.org/r/5697980e-f687-47a7-9db8-2af34ae464bd@kili.mountain Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11pinctrl: at91: Use dev_err_probe() instead of custom messagingAndy Shevchenko
[ Upstream commit 472bbb2cfd6384fe4c4b956af2170c1225fe2a92 ] The custom message has no value except printing the error code, the same does dev_err_probe(). Let's use the latter for the sake of unification. Note that some APIs already have messaging in them and some simply do not require the current noise. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230215134242.37618-5-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Stable-dep-of: 35216718c9ac ("pinctrl: at91: fix a couple NULL vs IS_ERR() checks") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11pinctrl: at91: Don't mix non-devm calls with devm onesAndy Shevchenko
[ Upstream commit 415a099ea55ae716b69beefdcaa654b96087c016 ] Replace devm_clk_get() by devm_clk_get_enabled() and drop unneeded code pieces. This will make sure we keep the ordering of the resource allocation correct. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230215134242.37618-3-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Stable-dep-of: 35216718c9ac ("pinctrl: at91: fix a couple NULL vs IS_ERR() checks") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-11pinctrl: bcm2835: Handle gpiochip_add_pin_range() errorsChristophe JAILLET
[ Upstream commit cdf7e616120065007687fe1df0412154f259daec ] gpiochip_add_pin_range() can fail, so better return its error code than a hard coded '0'. Fixes: d2b67744fd99 ("pinctrl: bcm2835: implement hook for missing gpio-ranges") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/98c3b5890bb72415145c9fe4e1d974711edae376.1681681402.git.christophe.jaillet@wanadoo.fr Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-14pinctrl: meson-axg: add missing GPIOA_18 gpio groupMartin Hundebøll
commit 5b10ff013e8a57f8845615ac2cc37edf7f6eef05 upstream. Without this, the gpio cannot be explicitly mux'ed to its gpio function. Fixes: 83c566806a68a ("pinctrl: meson-axg: Add new pinctrl driver for Meson AXG SoC") Cc: stable@vger.kernel.org Signed-off-by: Martin Hundebøll <martin@geanix.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Link: https://lore.kernel.org/r/20230512064925.133516-1-martin@geanix.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-24pinctrl: at91: use devm_kasprintf() to avoid potential leaks (part 2)Andy Shevchenko
[ Upstream commit f494c1913cbb34b9e2078b7b045c87c1ca6df791 ] Use devm_kasprintf() instead of kasprintf() to avoid any potential leaks. At the moment drivers have no remove functionality hence there is no need for fixes tag. While at it, switch to use devm_kasprintf_strarray(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230215134242.37618-2-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11pinctrl-bcm2835.c: fix race condition when setting gpio dirHans Verkuil
[ Upstream commit b7badd752de05312fdb1aeb388480f706d0c087f ] In the past setting the pin direction called pinctrl_gpio_direction() which uses a mutex to serialize this. That was changed to set the direction directly in the pin controller driver, but that lost the serialization mechanism. Since the direction of multiple pins are in the same register you can have a race condition, something that was in fact observed with the cec-gpio driver. Add a new spinlock to serialize writing to the FSEL registers. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 1a4541b68e25 ("pinctrl-bcm2835: don't call pinctrl_gpio_direction()") Link: https://lore.kernel.org/r/4302b66b-ca20-0f19-d2aa-ee8661118863@xs4all.nl Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11pinctrl: ralink: reintroduce ralink,rt2880-pinmux compatible stringArınç ÜNAL
[ Upstream commit 7c19147d9cfc0f9328049d2e278279150d7de9ca ] There have been stable releases with the ralink,rt2880-pinmux compatible string included. Having it removed breaks the ABI. Reintroduce it. Fixes: e5981cd46183 ("pinctrl: ralink: add new compatible strings for each pinctrl subdriver") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20230317213011.13656-2-arinc.unal@arinc9.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11pinctrl: renesas: r8a779g0: Fix ERROROUTC function namesGeert Uytterhoeven
[ Upstream commit 9da805344d2a2d27a32cc9271230055d8818e887 ] According to R-Car V4H Series User’s Manual: Hardware Rev. 0.54, the ERROROUTC signal is active-low. Hence add the missing "_N" suffix to the pin function's names. Resize column 2 of all IPxSR* definitions to accomodate the longer names. Fixes: b811062e5fd0343c ("pinctrl: renesas: r8a779g0: Add missing ERROROUTC_A") Fixes: ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1774303989e7d61f08fa81f1c2fa1b394505645f.1669036423.git.geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11pinctrl: renesas: r8a779g0: Fix Group 6/7 pin functionsGeert Uytterhoeven
[ Upstream commit 203734a0419cade9c76016f66e2c7ba354c249b4 ] According to R-Car V4H Series User’s Manual: Hardware Rev. 0.54, pin groups 6 and 7 do not use Module Select Registers to configure pin functions. Hence: - Remove the non-existent Module Select Registers (MODSEL[67]), - Correct the affected PINMUX definitions. Fixes: 36611d28f5130d8b ("pinctrl: renesas: r8a779g0: Add missing MODSELx for AVBx") Fixes: ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/06972cafd0efa4cfb395cfa76000a1bdae5e9e73.1669036423.git.geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11pinctrl: renesas: r8a779g0: Fix Group 4/5 pin functionsGeert Uytterhoeven
[ Upstream commit 0a7a5226e7b177c68800985a19a80c1df9bceff6 ] According to R-Car V4H Series User’s Manual: Hardware Rev. 0.54, pin groups 4 and 5 do not use Module Select Registers to configure pin functions, but use Peripheral Function Select Registers instead. Hence: - Remove the non-existent Module Select Registers (MODSEL[45]), - Add the missing Peripheral Function Select Registers (IPxSR[45]), - Correct the GPIO / Peripheral Function Select Register definitions (GPSR]45_*), - Correct the affected PINMUX definitions. Fixes: 36611d28f5130d8b ("pinctrl: renesas: r8a779g0: Add missing MODSELx for AVBx") Fixes: 36fb7b8af55b83e0 ("pinctrl: renesas: r8a779g0: Add missing MODSELx for TSN0") Fixes: ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/3d3833d1738f5e8fcc4c1002aa93832464d129a0.1669036423.git.geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11pinctrl: renesas: r8a779f0: Fix tsn1_avtp_pps pin groupPhong Hoang
[ Upstream commit 60003351e99167d8cfa7c161e95856efc016f381 ] Correct a typo mistake in the definition of the tsn1_avtp_pps pin group mux. Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com> Fixes: babe298e9caaa3d7 ("pinctrl: renesas: r8a779f0: Add Ethernet pins, groups, and functions") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/45ea6e87b91c36fd0b9706cf58ff50a4d1a99c44.1674825039.git.geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11pinctrl: renesas: r8a779a0: Remove incorrect AVB[01] pinmux configurationHai Pham
[ Upstream commit a145c9a8674ac8fbfa1595276e1b6cbfc5139038 ] AVB[01]_{MAGIC,MDC,MDIO,TXCREFCLK} are registered as both PINMUX_SINGLE(fn) and PINMUX_IPSR_GPSR(fn) in the pinmux_data array. The latter are correct, hence remove the former. Without this fix, the Ethernet PHY is not operational on the MDIO bus. Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com> Fixes: 741a7370fc3b8b54 ("pinctrl: renesas: Initial R8A779A0 (V3U) PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/6fd217b71e83ba9a8157513ed671a1fa218b23b6.1674824958.git.geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11pinctrl: qcom: lpass-lpi: set output value before enabling outputKrzysztof Kozlowski
commit 163bfb0cb1f6fbf961cf912cbde57399ea1ae0e8 upstream. As per Hardware Programming Guide, when configuring pin as output, set the pin value before setting output-enable (OE). Similar approach is in main SoC TLMM pin controller. Cc: <stable@vger.kernel.org> Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230309154949.658380-1-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-11Revert "pinctrl: amd: Disable and mask interrupts on resume"Kornel Dulęba
This reverts commit b26cd9325be4c1fcd331b77f10acb627c560d4d7. This patch introduces a regression on Lenovo Z13, which can't wake from the lid with it applied; and some unspecified AMD based Dell platforms are unable to wake from hitting the power button Signed-off-by: Kornel Dulęba <korneld@chromium.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230411134932.292287-1-korneld@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-28pinctrl: amd: Disable and mask interrupts on resumeKornel Dulęba
This fixes a similar problem to the one observed in: commit 4e5a04be88fe ("pinctrl: amd: disable and mask interrupts on probe"). On some systems, during suspend/resume cycle firmware leaves an interrupt enabled on a pin that is not used by the kernel. This confuses the AMD pinctrl driver and causes spurious interrupts. The driver already has logic to detect if a pin is used by the kernel. Leverage it to re-initialize interrupt fields of a pin only if it's not used by us. Cc: stable@vger.kernel.org Fixes: dbad75dd1f25 ("pinctrl: add AMD GPIO driver support.") Signed-off-by: Kornel Dulęba <korneld@chromium.org> Link: https://lore.kernel.org/r/20230320093259.845178-1-korneld@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-06pinctrl: stm32: use dynamic allocation of GPIO baseDario Binacchi
Since commit 502df79b860563d7 ("gpiolib: Warn on drivers still using static gpiobase allocation"), one or more warnings are printed during boot on systems where static allocation of GPIO base is used: [ 0.197707] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.199942] stm32f429-pinctrl soc:pinctrl@40020000: GPIOA bank added [ 0.200711] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.202855] stm32f429-pinctrl soc:pinctrl@40020000: GPIOB bank added [ 0.203591] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.205704] stm32f429-pinctrl soc:pinctrl@40020000: GPIOC bank added [ 0.206338] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.208448] stm32f429-pinctrl soc:pinctrl@40020000: GPIOD bank added [ 0.209182] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.211282] stm32f429-pinctrl soc:pinctrl@40020000: GPIOE bank added [ 0.212094] gpio gpiochip5: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.214270] stm32f429-pinctrl soc:pinctrl@40020000: GPIOF bank added [ 0.215005] gpio gpiochip6: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.217110] stm32f429-pinctrl soc:pinctrl@40020000: GPIOG bank added [ 0.217845] gpio gpiochip7: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.219959] stm32f429-pinctrl soc:pinctrl@40020000: GPIOH bank added [ 0.220602] gpio gpiochip8: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.222714] stm32f429-pinctrl soc:pinctrl@40020000: GPIOI bank added [ 0.223483] gpio gpiochip9: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.225594] stm32f429-pinctrl soc:pinctrl@40020000: GPIOJ bank added [ 0.226336] gpio gpiochip10: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.228490] stm32f429-pinctrl soc:pinctrl@40020000: GPIOK bank added So let's follow the suggestion and use dynamic allocation. Tested on STM32F429I-DISC1 board. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230227205131.2104082-1-dario.binacchi@amarulasolutions.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-06pinctrl: ocelot: Fix alt mode for ocelotHoratiu Vultur
In case the driver was trying to set an alternate mode for gpio 0 or 32 then the mode was not set correctly. The reason is that there is computation error inside the function ocelot_pinmux_set_mux because in this case it was trying to shift to left by -1. Fix this by actually shifting the function bits and not the position. Fixes: 4b36082e2e09 ("pinctrl: ocelot: fix pinmuxing for pins after 31") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20230206203720.1177718-1-horatiu.vultur@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-06pinctrl: at91-pio4: fix domain name assignmentJohan Hovold
Since commit d59f6617eef0 ("genirq: Allow fwnode to carry name information only") an IRQ domain is always given a name during allocation (e.g. used for the debugfs entry). Drop the no longer valid name assignment, which would lead to an attempt to free a string constant when removing the domain on late probe failures (e.g. probe deferral). Fixes: d59f6617eef0 ("genirq: Allow fwnode to carry name information only") Cc: stable@vger.kernel.org # 4.13 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> # on SAMA7G5 Link: https://lore.kernel.org/r/20230224130828.27985-1-johan+linaro@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-06pinctrl: mediatek: fix naming inconsistencyArınç ÜNAL
Some options include "MediaTek", some "Mediatek". Rename all to "MediaTek" to address the naming inconsistency. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/20230218065108.8958-2-arinc.unal@arinc9.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-03-06pinctrl: mediatek: add missing options to PINCTRL_MT7981Arınç ÜNAL
There are options missing from PINCTRL_MT7981 whilst being on every other pin controller. Add them. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/20230218065108.8958-1-arinc.unal@arinc9.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-02-27Merge tag 'soc-drivers-6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "As usual, there are lots of minor driver changes across SoC platforms from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung. These usually add support for additional chip variations in existing drivers, but also add features or bugfixes. The SCMI firmware subsystem gains a unified raw userspace interface through debugfs, which can be used for validation purposes. Newly added drivers include: - New power management drivers for StarFive JH7110, Allwinner D1 and Renesas RZ/V2M - A driver for Qualcomm battery and power supply status - A SoC device driver for identifying Nuvoton WPCM450 chips - A regulator coupler driver for Mediatek MT81xxv" * tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) power: supply: Introduce Qualcomm PMIC GLINK power supply soc: apple: rtkit: Do not copy the reg state structure to the stack soc: sunxi: SUN20I_PPU should depend on PM memory: renesas-rpc-if: Remove redundant division of dummy soc: qcom: socinfo: Add IDs for IPQ5332 and its variant dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/ MAINTAINERS: Update qcom CPR maintainer entry dt-bindings: firmware: document Qualcomm SM8550 SCM dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants soc: qcom: socinfo: Add support for new field in revision 17 soc: qcom: smd-rpm: Add IPQ9574 compatible soc: qcom: pmic_glink: remove redundant calculation of svid soc: qcom: stats: Populate all subsystem debugfs files dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies soc: qcom: pmic_glink: Introduce altmode support ...
2023-02-22Merge tag 'pinctrl-v6.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Nothing special, notably a lot of new Qualcomm hardware is supported, a RISC-V reference SoC and then some cleanups both in code and device tree bindings. Core changes: - Add PINCTRL_PINFUNCTION() macro and use it in several drivers New drivers: - New driver for the StarFive JH7110 SoC "sys" and "aon" (always-on) pin controllers. (RISC-V.) - New subdriver for the Qualcomm QDU1000/QRU1000 SoC pin controller - New subdrivers for the Qualcomm SM8550 SoC and LPASS pin controllers - New subdriver for the Qualcomm SA8775P SoC pin controller - New subdriver for the Qualcomm IPQ5332 SoC pin controller - New (trivial) support for Qualcomm PM8550 and PMR735D PMIC pin control - New subdriver for the Mediatek MT7981 SoC pin controller Improvements: - Several cleanups and refactorings to the Intel drivers - Add 4KOhm bias support to the Intel driver - Use the NOIRQ_SYSTEM_SLEEP_PM_OPS for the AT91 driver - Support general purpose clocks in the Qualcomm MSM8226 SoC - Several conversions to use the new I2C .probe_new() call - Massive clean-up of the Qualcomm Device Tree YAML schemas - Add VIN[45] pins, groups and functions to the Renesas r8a77950 SoC driver" * tag 'pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (118 commits) pinctrl: qcom: Add support for i2c specific pull feature pinctrl: starfive: Add StarFive JH7110 aon controller driver pinctrl: starfive: Add StarFive JH7110 sys controller driver dt-bindings: pinctrl: Add StarFive JH7110 aon pinctrl dt-bindings: pinctrl: Add StarFive JH7110 sys pinctrl pinctrl: add mt7981 pinctrl driver dt-bindings: pinctrl: add bindings for MT7981 SoC dt-bindings: pinctrl: rockchip,pinctrl: mark gpio sub nodes of pinctrl as deprecated pinctrl: qcom: Introduce IPQ5332 TLMM driver dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl dt-bindings: pinctrl: qcom: lpass-lpi: correct GPIO name pattern pinctrl: qcom: pinctrl-sm8550-lpass-lpi: add SM8550 LPASS dt-bindings: pinctrl: qcom,sm8550-lpass-lpi-pinctrl: add SM8550 LPASS pinctrl: at91: use devm_kasprintf() to avoid potential leaks dt-bindings: pinctrl: qcom: correct gpio-ranges in examples dt-bindings: pinctrl: qcom,msm8994: correct number of GPIOs dt-bindings: pinctrl: qcom,sdx55: correct GPIO name pattern dt-bindings: pinctrl: qcom,msm8953: correct GPIO name pattern dt-bindings: pinctrl: qcom,sm6375: correct GPIO name pattern and example dt-bindings: pinctrl: qcom,msm8909: correct GPIO name pattern and example ...
2023-02-22Merge tag 'gpio-updates-for-v6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "A rather small update, there are no new drivers, just improvements and refactoring in existing ones. Thanks to migrating of several drivers to using generalized APIs and dropping of OF interfaces in favor of using software nodes we're actually removing more code than we're adding. Core GPIOLIB: - drop several OF interfaces after moving a significant part of the code to using software nodes - remove more interfaces referring to the global GPIO numberspace that we're getting rid of - improvements in the gpio-regmap library - add helper for GPIO device reference counting - remove unused APIs - minor tweaks like sorting headers alphabetically Extended support in existing drivers: - add support for Tegra 234 PMC to gpio-tegra186 Driver improvements: - migrate the 104-dio/idi family of drivers to using the regmap-irq API - migrate gpio-i8255 and gpio-mm to the GPIO regmap API - clean-ups in gpio-pca953x - remove duplicate assignments of of_gpio_n_cells in gpio-davinci, gpio-ge, gpio-xilinx, gpio-zevio and gpio-wcd934x - improvements to gpio-pcf857x: implement get/set_multiple callbacks, use generic device properties instead of OF + minor tweaks - fix OF-related header includes and Kconfig dependencies in gpio-zevio - dynamically allocate the GPIO base in gpio-omap - use a dedicated printf specifier for printing fwnode info in gpio-sim - use dev_name() for the GPIO chip label in gpio-vf610 - other minor tweaks and fixes Documentation: - remove mentions of legacy API from comments in various places - convert the DT binding documents to YAML schema for Fujitsu MB86S7x, Unisoc GPIO and Unisoc EIC - document the Unisoc UMS512 controller in DT bindings" * tag 'gpio-updates-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (54 commits) gpio: sim: Use %pfwP specifier instead of calling fwnode API directly gpio: tegra186: remove unneeded loop in tegra186_gpio_init_route_mapping() gpiolib: of: Move enum of_gpio_flags to its only user gpio: mvebu: Use IS_REACHABLE instead of IS_ENABLED for CONFIG_PWM gpio: zevio: Add missing header gpio: Get rid of gpio_to_chip() gpio: pcf857x: Drop unneeded explicit casting gpio: pcf857x: Make use of device properties gpio: pcf857x: Get rid of legacy platform data gpio: rockchip: Do not mention legacy API in the code gpio: wcd934x: Remove duplicate assignment of of_gpio_n_cells gpio: zevio: Use proper headers and drop OF_GPIO dependency gpio: zevio: Remove duplicate assignment of of_gpio_n_cells gpio: xilinx: Remove duplicate assignment of of_gpio_n_cells dt-bindings: gpio: Add compatible string for Unisoc UMS512 dt-bindings: gpio: Convert Unisoc EIC controller binding to yaml dt-bindings: gpio: Convert Unisoc GPIO controller binding to yaml gpio: ge: Remove duplicate assignment of of_gpio_n_cells gpio: davinci: Remove duplicate assignment of of_gpio_n_cells gpio: omap: use dynamic allocation of base ...
2023-02-20Merge tag 'arm-boardfile-remove-6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC boardfile updates from Arnd Bergmann "Unused boardfile removal for 6.3 This is a follow-up to the deprecation of most of the old-style board files that was merged in linux-6.0, removing them for good. This branch is almost exclusively dead code removal based on those annotations. Some device driver removals went through separate subsystem trees, but the majority is in the same branch, in order to better handle dependencies between the patches and avoid breaking bisection. Unfortunately that leads to merge conflicts against other changes in the subsystem trees, but they should all be trivial to resolve by removing the files. See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the description of which machines were marked unused and are now removed. The only removals that got postponed are Terastation WXL (mv78xx0) and Jornada720 (StrongARM1100), which turned out to still have potential users" * tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits) mmc: omap: drop TPS65010 dependency ARM: pxa: restore mfp-pxa320.h usb: ohci-omap: avoid unused-variable warning ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs ARM: s3c: remove obsolete s3c-cpu-freq header MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal ARM: remove CONFIG_UNUSED_BOARD_FILES mfd: remove htc-pasic3 driver w1: remove ds1wm driver usb: remove ohci-tmio driver fbdev: remove w100fb driver fbdev: remove tmiofb driver mmc: remove tmio_mmc driver mfd: remove ucb1400 support mfd: remove toshiba tmio drivers rtc: remove v3020 driver power: remove pda_power supply driver ASoC: pxa: remove unused board support pcmcia: remove unused pxa/sa1100 drivers ...
2023-02-10pinctrl: qcom: Add support for i2c specific pull featureAbel Vesa
Add support for the new i2c_pull property introduced for SM8550 setting a I2C specific pull mode on I2C able pins. Add the bit to the SM8550 specific driver while at it. Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230209074510.4153294-1-abel.vesa@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-02-10pinctrl: starfive: Add StarFive JH7110 aon controller driverJianlong Huang
Add pinctrl driver for StarFive JH7110 SoC aon pinctrl controller. Co-developed-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com> Signed-off-by: Hal Feng <hal.feng@starfivetech.com> Link: https://lore.kernel.org/r/20230209143702.44408-5-hal.feng@starfivetech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-02-10pinctrl: starfive: Add StarFive JH7110 sys controller driverJianlong Huang
Add pinctrl driver for StarFive JH7110 SoC sys pinctrl controller. Co-developed-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com> Signed-off-by: Hal Feng <hal.feng@starfivetech.com> Link: https://lore.kernel.org/r/20230209143702.44408-4-hal.feng@starfivetech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-02-08firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/Elliot Berman
Move include/linux/qcom_scm.h to include/linux/firmware/qcom/qcom_scm.h. This removes 1 of a few remaining Qualcomm-specific headers into a more approciate subdirectory under include/. Suggested-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com> Acked-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230203210956.3580811-1-quic_eberman@quicinc.com
2023-02-07pinctrl: add mt7981 pinctrl driverDaniel Golle
Add pinctrl driver for the MediaTek MT7981 SoC, based on the driver which can also be found the SDK. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/ef5112946d16cacc67e65e439ba7b52a9950c1bb.1674693008.git.daniel@makrotopia.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-02-07pinctrl: qcom: Introduce IPQ5332 TLMM driverKathiravan T
The IPQ5332 SoC comes with a TLMM block, like all other Qualcomm platforms, so add a driver for it. Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230206071217.29313-3-quic_kathirav@quicinc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-02-07pinctrl: intel: Restore the pins that used to be in Direct IRQ modeAndy Shevchenko
If the firmware mangled the register contents too much, check the saved value for the Direct IRQ mode. If it matches, we will restore the pin state. Reported-by: Jim Minter <jimminter@microsoft.com> Fixes: 6989ea4881c8 ("pinctrl: intel: Save and restore pins in "direct IRQ" mode") Tested-by: Jim Minter <jimminter@microsoft.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20230206141558.20916-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-02-06pinctrl: qcom: pinctrl-sm8550-lpass-lpi: add SM8550 LPASSKrzysztof Kozlowski
Add druver for pin controller in Low Power Audio SubSystem (LPASS). The driver is similar to SM8450 LPASS pin controller, with differences in few pin groups (qua_mi2s -> i2s0). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230203174645.597053-2-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-02-06pinctrl: qcom: sm8450-lpass-lpi: correct swr_rx_data groupKrzysztof Kozlowski
According to hardware programming guide, the swr_rx_data pin group has only two pins (GPIO5 and GPIO6). This is also visible in "struct sm8450_groups" in the driver - GPIO15 does not have swr_rx_data function. Fixes: ec1652fc4d56 ("pinctrl: qcom: Add sm8450 lpass lpi pinctrl driver") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230203165054.390762-1-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-02-06pinctrl: at91: use devm_kasprintf() to avoid potential leaksClaudiu Beznea
Use devm_kasprintf() instead of kasprintf() to avoid any potential leaks. At the moment drivers have no remove functionality thus there is no need for fixes tag. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230203132714.1931596-1-claudiu.beznea@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-02-01pinctrl: qcom: add the tlmm driver sa8775p platformsYadu MG
Add support for Lemans TLMM configuration and control via the pinctrl framework. Signed-off-by: Yadu MG <quic_ymg@quicinc.com> Signed-off-by: Prasad Sodagudi <quic_psodagud@quicinc.com> [Bartosz: made the driver ready for upstream] Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230201150011.200613-3-brgl@bgdev.pl Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-01-30pinctrl: aspeed: Revert "Force to disable the function's signal"Joel Stanley
This reverts commit cf517fef601b9dde151f0afc27164d13bf1fd907. The commit cf517fef601b ("pinctrl: aspeed: Force to disable the function's signal") exposed a problem with fetching the regmap for reading the GFX register. The Romulus machine the device tree contains a gpio hog for GPIO S7. With the patch applied: Muxing pin 151 for GPIO Disabling signal VPOB9 for VPO aspeed-g5-pinctrl 1e6e2080.pinctrl: Failed to acquire regmap for IP block 1 aspeed-g5-pinctrl 1e6e2080.pinctrl: request() failed for pin 151 The code path is aspeed-gpio -> pinmux-g5 -> regmap -> clk, and the of_clock code returns an error as it doesn't have a valid struct clk_hw pointer. The regmap call happens because pinmux wants to check the GFX node (IP block 1) to query bits there. For reference, before the offending patch: Muxing pin 151 for GPIO Disabling signal VPOB9 for VPO Want SCU8C[0x00000080]=0x1, got 0x0 from 0x00000000 Disabling signal VPOB9 for VPOOFF1 Want SCU8C[0x00000080]=0x1, got 0x0 from 0x00000000 Disabling signal VPOB9 for VPOOFF2 Want SCU8C[0x00000080]=0x1, got 0x0 from 0x00000000 Enabling signal GPIOS7 for GPIOS7 Muxed pin 151 as GPIOS7 gpio-943 (seq_cont): hogged as output/low We can't skip the clock check to allow pinmux to proceed, because the write to disable VPOB9 will try to set a bit in the GFX register space which will not stick when the IP is in reset. However, we do not want to enable the IP just so pinmux can do a disable-enable dance for the pin. For now, revert the offending patch while a correct solution is found. Fixes: cf517fef601b ("pinctrl: aspeed: Force to disable the function's signal") Link: https://github.com/openbmc/linux/issues/218 Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20230130220845.917985-1-joel@jms.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-01-30Merge tag 'intel-pinctrl-v6.3-1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel intel-pinctrl for v6.3-1 * Add ~4kOhm bias support to Intel pin control drivers * Convert Intel pin control drivers to use INTEL_COMMUNITY_*() * Add struct pinfunction and use it in Intel pin control drivers * Make pin control documentation up to date * Miscellaneous cleanups The following is an automated git shortlog grouped by driver: pinctrl: - Proofreading and updating the documentation accordingly - Proofreading and updating the documentation (part 2) alderlake: - Replace ADL_COMMUNITY() by INTEL_COMMUNITY_GPPS() baytrail: - Convert to use new memeber in struct intel_function broxton: - Replace BXT_COMMUNITY() by INTEL_COMMUNITY_SIZE() cannonlake: - Replace CNL_COMMUNITY() by INTEL_COMMUNITY_GPPS() cedarfork: - Replace CDF_COMMUNITY() by INTEL_COMMUNITY_GPPS() cherryview: - Convert to use new memeber in struct intel_function denverton: - Replace DNV_COMMUNITY() by INTEL_COMMUNITY_GPPS() elkhartlake: - Replace EHL_COMMUNITY() by INTEL_COMMUNITY_GPPS() emmitsburg: - Replace EBG_COMMUNITY() by INTEL_COMMUNITY_GPPS() geminilake: - Replace GLK_COMMUNITY() by INTEL_COMMUNITY_SIZE() icelake: - Replace ICL_COMMUNITY() by INTEL_COMMUNITY_GPPS() intel: - Get rid of unused members in struct intel_function - Make use of struct pinfunction and PINCTRL_PINFUNCTION() - Define maximum pad number in the group - Use same order of bit fields for PADCFG2 - Add ~4k bias support - Add definitions to all possible biases - Deduplicate some code in intel_config_set_pull() - Add default case to intel_config_set_pull() - Convert to generic_handle_domain_irq() - Always use gpp_num_padown_regs in the main driver - Introduce INTEL_COMMUNITY_*() to unify community macros Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro: - Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro jasperlake: - Replace JSL_COMMUNITY() by INTEL_COMMUNITY_GPPS() lakefield: - Replace LKF_COMMUNITY() by INTEL_COMMUNITY_GPPS() lewisburg: - Replace LBG_COMMUNITY() by INTEL_COMMUNITY_SIZE() lynxpoint: - Convert to use new memeber in struct intel_function merrifield: - Convert to use new memeber in struct intel_function meteorlake: - Replace MTL_COMMUNITY() by INTEL_COMMUNITY_GPPS() moorefield: - Convert to use new memeber in struct intel_function sunrisepoint: - Replace SPT_COMMUNITY() by INTEL_COMMUNITY_*() tigerlake: - Replace TGL_COMMUNITY() by INTEL_COMMUNITY_GPPS()
2023-01-30Merge tag 'renesas-pinctrl-for-v6.3-tag1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: renesas: Updates for v6.3 - Add pin groups for Video-In channels 4 and 5 on R-Car H3 ES1.x, - Miscellaneous fixes and improvements.
2023-01-30gpio: Get rid of gpio_to_chip()Linus Walleij
The gpio_to_chip() function refers to the global GPIO numberspace which is a problem we want to get rid of. Get this function out of the header and open code it into gpiolib with appropriate FIXME notices so no new users appear in the kernel. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-01-27pinctrl: at91: fix deferred probing supportRob Herring
AT91 pinctrl deferred probing support is broken if the GPIO devices haven't probed first and set gpio_banks to non-zero. The later condition that only some GPIO devices haven't probed can't actually happen as either all the GPIO devices have probed first or none of them have. Plus the pinctrl driver has already returned -EINVAL, so it's not on the deferred list to retry probing. Fix this by consolidating the checking that all GPIO devices are probed. Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-gpio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> # on sama5d3 xplained Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20180712192222.32481-1-robh@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-01-27pinctrl: single: fix potential NULL dereferenceMaxim Korotkov
Added checking of pointer "function" in pcs_set_mux(). pinmux_generic_get_function() can return NULL and the pointer "function" was dereferenced without checking against NULL. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 571aec4df5b7 ("pinctrl: single: Use generic pinmux helpers for managing functions") Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20221118104332.943-1-korotkov.maxim.s@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.51.0) at 2026-10-19 21:54:35 +0000