| Age | Commit message (Collapse) | Author |
|---|
|
Since 96336ec70264 ("PCI: Perform reset_resource() and build fail list in
sync") the failed list is always built and returned to let the caller
decide what to do with the failures. The caller may want to retry resource
fitting and assignment and before that can happen, the resources should be
restored to their original state (a reset effectively clears the struct
resource), which requires returning them to the failed list so the original
state remains stored in the associated struct pci_dev_resource.
Resource resizing is different from the ordinary resource fitting and
assignment in that it only considers part of the resources. This means
failures for other resource types are not relevant at all and should be
ignored. As resize doesn't unassign such unrelated resources, those
resources ending up in the failed list implies assignment of that
resource must have failed before resize too. The check in
pci_reassign_bridge_resources() to decide if the whole assignment is
successful, however, is based on list emptiness which will cause false
negatives when the failed list has resources with an unrelated type.
If the failed list is not empty, call pci_required_resource_failed() and
extend it to be able to filter on specific resource types too (if
provided).
Calling pci_required_resource_failed() at this point is slightly
problematic because the resource itself is reset when the failed list
is constructed in __assign_resources_sorted(). As a result,
pci_resource_is_optional() does not have access to the original
resource flags. This could be worked around by restoring and
re-resetting the resource around the call to pci_resource_is_optional(),
however, it shouldn't cause issue as resource resizing is meant for
64-bit prefetchable resources according to Christian König (see the
Link which unfortunately doesn't point directly to Christian's reply
because lore didn't store that email at all).
Fixes: 96336ec70264 ("PCI: Perform reset_resource() and build fail list in sync")
Link: https://lore.kernel.org/all/c5d1b5d8-8669-5572-75a7-0b480f581ac1@linux.intel.com/
Reported-by: D Scott Phillips <scott@os.amperecomputing.com>
Closes: https://lore.kernel.org/all/86plf0lgit.fsf@scott-ph-mail.amperecomputing.com/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: D Scott Phillips <scott@os.amperecomputing.com>
Reviewed-by: D Scott Phillips <scott@os.amperecomputing.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org # v6.15+
Link: https://patch.msgid.link/20250822123359.16305-4-ilpo.jarvinen@linux.intel.com
|
|
pdev_sort_resources() uses pdev_resources_assignable() helper to decide if
device's resources cannot be assigned, so it ignores class 0
(PCI_CLASS_NOT_DEFINED) devices. pbus_size_mem(), on the other hand, does
not do the same check. This could lead into a situation where a resource
ends up on realloc_head list but is not on the head list, which in turn
prevents emptying the resource from the realloc_head list in
__assign_resources_sorted().
A non-empty realloc_head is unacceptable because it triggers an internal
sanity check as shown in this log with a device that has class 0
(PCI_CLASS_NOT_DEFINED):
pci 0001:01:00.0: [144d:a5a5] type 00 class 0x000000 PCIe Endpoint
pci 0001:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit]
pci 0001:01:00.0: ROM [mem 0x00000000-0x0000ffff pref]
pcieport 0001:00:00.0: bridge window [mem 0x00100000-0x001fffff] to [bus 01-ff] add_size 100000 add_align 100000
pcieport 0001:00:00.0: bridge window [mem 0x40000000-0x401fffff]: assigned
------------[ cut here ]------------
kernel BUG at drivers/pci/setup-bus.c:2532!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
...
Call trace:
pci_assign_unassigned_bus_resources+0x110/0x114 (P)
pci_rescan_bus+0x28/0x48
Use pdev_resources_assignable() also within pbus_size_mem() to skip
processing of non-assignable resources which removes the disparity in
between what resources pdev_sort_resources() and pbus_size_mem() consider.
As non-assignable resources are no longer processed, they are not added to
the realloc_head list, thus the sanity check no longer triggers.
This disparity problem is very old but only now became apparent after
2499f5348431 ("PCI: Rework optional resource handling") that made the ROM
resources optional when calculating bridge window sizes which required
adding the resource to the realloc_head list. Previously, bridge windows
were just sized larger than necessary.
Fixes: 2499f5348431 ("PCI: Rework optional resource handling")
Reported-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Closes: https://lore.kernel.org/all/5f103643-5e1c-43c6-b8fe-9617d3b5447c@linaro.org/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v6.15+
Link: https://patch.msgid.link/20250822123359.16305-3-ilpo.jarvinen@linux.intel.com
|
|
When using relaxed tail alignment for the bridge window, pbus_size_mem()
also tries to minimize min_align, which can under certain scenarios end up
increasing min_align from that found by calculate_mem_align().
Ensure min_align is not increased by the relaxed tail alignment.
Eventually, it would be better to add calculate_relaxed_head_align()
similar to calculate_mem_align() which finds out what alignment can be used
for the head without introducing any gaps into the bridge window to give
flexibility on head address too. But that looks relatively complex so it
requires much more testing than fixing the immediate problem causing a
regression.
Fixes: 67f9085596ee ("PCI: Allow relaxed bridge window tail sizing for optional resources")
Reported-by: Rio Liu <rio@r26.me>
Closes: https://lore.kernel.org/all/o2bL8MtD_40-lf8GlslTw-AZpUPzm8nmfCnJKvS8RQ3NOzOW1uq1dVCEfRpUjJ2i7G2WjfQhk2IWZ7oGp-7G-jXN4qOdtnyOcjRR0PZWK5I=@r26.me/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Rio Liu <rio@r26.me>
Cc: stable@vger.kernel.org # v6.15+
Link: https://patch.msgid.link/20250822123359.16305-2-ilpo.jarvinen@linux.intel.com
|
|
The fields dma_chan_tx and dma_chan_rx of the struct pci_epf_test can be
NULL even after EPF initialization. Then it is prudent to check that
they have non-NULL values before releasing the channels. Add the checks
in pci_epf_test_clean_dma_chan().
Without the checks, NULL pointer dereferences happen and they can lead
to a kernel panic in some cases:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050
Call trace:
dma_release_channel+0x2c/0x120 (P)
pci_epf_test_epc_deinit+0x94/0xc0 [pci_epf_test]
pci_epc_deinit_notify+0x74/0xc0
tegra_pcie_ep_pex_rst_irq+0x250/0x5d8
irq_thread_fn+0x34/0xb8
irq_thread+0x18c/0x2e8
kthread+0x14c/0x210
ret_from_fork+0x10/0x20
Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities")
Fixes: 5ebf3fc59bd2 ("PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
[mani: trimmed the stack trace]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250916025756.34807-1-shinichiro.kawasaki@wdc.com
|
|
This is a backmerge of Linux 6.17-rc6, needed for msm,
also requested by misc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
dw_pcie_edma_irq_verify() already parses device tree for either "dma" (if
there is a single IRQ for all DMA channels) or "dmaX" (if there is one IRQ
per DMA channel), and initializes dma.nr_irqs accordingly.
Additionally, the probing of the eDMA driver will fail if neither "dma"
nor "dmaX" is defined in the device tree.
Therefore there is no need for a glue driver to specify edma.nr_irqs, so
remove the redundant edma.nr_irqs initialization.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: fix typos]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250908165914.547002-4-cassel@kernel.org
|
|
dw_pcie_edma_irq_verify() is supposed to verify the eDMA IRQs in devicetree
by fetching them using either 'dma' or 'dmaX' IRQ names. Former is used
when the platform uses a single IRQ for all eDMA channels and latter is
used when the platform uses separate IRQ per channel. But currently,
dw_pcie_edma_irq_verify() bails out early if edma::nr_irqs is 1, i.e., when
a single IRQ is used. This gives an impression that the driver could work
with any single IRQ in devicetree, not necessarily with name 'dma'.
But dw_pcie_edma_irq_vector(), which actually requests the IRQ, does
require the single IRQ to be named as 'dma'. So this creates inconsistency
between dw_pcie_edma_irq_verify() and dw_pcie_edma_irq_vector().
Thus, to fix this inconsistency, make sure dw_pcie_edma_irq_verify() also
verifies the single IRQ name by removing the bail out code.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: fix typos]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250908165914.547002-3-cassel@kernel.org
|
|
The doorbell feature temporarily overrides the inbound translation to point
to the address stored in epf_test->db_bar.phys_addr, i.e., it calls
set_bar() twice without ever calling clear_bar(), as calling clear_bar()
would clear the BAR's PCI address assigned by the host.
Thus, when disabling the doorbell, restore the inbound translation to point
to the memory allocated for the BAR.
Without this, running the PCI endpoint kselftest doorbell test case more
than once would fail.
Fixes: eff0c286aa91 ("PCI: endpoint: pci-epf-test: Add doorbell test support")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250908161942.534799-2-cassel@kernel.org
|
|
Some interrupt controllers require an #address-cells property in their
bindings without requiring a "reg" property to be present.
The current logic used to craft an interrupt-map property in
of_pci_prop_intr_map() is based on reading the #address-cells
property in the interrupt-parent and, if != 0, read the interrupt
parent "reg" property to determine the parent unit address to be
used to create the parent unit interrupt specifier.
First of all, it is not correct to read the "reg" property of
the interrupt-parent with an #address-cells value taken from the
interrupt-parent node, because the #address-cells value define the
number of address cells required by child nodes.
More importantly, for all modern interrupt controllers, the parent
unit address is irrelevant in hardware in relation to the
device <-> interrupt-controller connection and the kernel actually
ignores the parent unit address value when hierarchically parsing
the interrupt-map property (i.e., of_irq_parse_raw()).
For the reasons above, remove the code parsing the interrupt parent "reg"
property in of_pci_prop_intr_map() -- it is not needed and prevents
interrupt-map property generation on systems with an interrupt-controller
that has no "reg" property in its interrupt-controller node -- and leave
the parent unit address always initialized to 0 since it is simply ignored
by the kernel.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/lkml/aJms+YT8TnpzpCY8@lpieralisi/
Link: https://patch.msgid.link/20250818093504.80651-1-lpieralisi@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Fix mvebu PCI enumeration regression caused by converting to
for_each_of_range() iterator (Klaus Kudielka)
* tag 'pci-v6.17-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: mvebu: Fix use of for_each_of_range() iterator
|
|
The kzalloc(GFP_KERNEL) may return NULL, so all accesses to aer_info->xxx
will result in kernel panic. Fix it.
Signed-off-by: Vernon Yang <yanglincheng@kylinos.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250904182527.67371-1-vernon2gm@gmail.com
|
|
vga_is_firmware_default() checks firmware resources to find the owner
framebuffer resources to find the firmware PCI device. This is an
open coded implementation of screen_info_pci_dev(). Switch to using
screen_info_pci_dev() instead.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250811162606.587759-3-superm1@kernel.org
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
|
|
Now that msi_lib_init_dev_msi_info() overwrites the irq_[un]mask()
callbacks when the MSI_FLAG_PCI_MSI_MASK_PARENT flag is set by the parent
domain, the conditional [un]mask logic is obsolete.
Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250903135433.444329373@linutronix.de
|
|
In preparation for the future commit ("bitops: Add __attribute_const__ to generic
ffs()-family implementations"), which allows GCC's value range tracker
to see past ffs(), GCC 8 on ARM thinks that it might be possible that
"ffs(rq) - 8" used here:
v = FIELD_PREP(PCI_EXP_DEVCTL_READRQ, ffs(rq) - 8);
could wrap below 0, leading to a very large value, which would be out of
range for the FIELD_PREP() usage:
drivers/pci/pci.c: In function 'pcie_set_readrq':
include/linux/compiler_types.h:572:38: error: call to '__compiletime_assert_471' declared with attribute error: FIELD_PREP: value too large for the field
...
drivers/pci/pci.c:5896:6: note: in expansion of macro 'FIELD_PREP'
v = FIELD_PREP(PCI_EXP_DEVCTL_READRQ, ffs(rq) - 8);
^~~~~~~~~~
If the result of the ffs() is bounds checked before being used in
FIELD_PREP(), the value tracker seems happy again. :)
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/linux-pci/CA+G9fYuysVr6qT8bjF6f08WLyCJRG7aXAeSd2F7=zTaHHd7L+Q@mail.gmail.com/
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250905052836.work.425-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Currently, the test allocates BAR sizes according to fixed table bar_size.
This does not work with controllers which have fixed size BARs that are
smaller than the requested BAR size. One such controller is Renesas R-Car
V4H PCIe controller, which has BAR4 size limited to 256 bytes, which is
much less than one of the BAR size, 131072 currently requested by this
test. A lot of controllers drivers in-tree have fixed size BARs, and they
do work perfectly fine, but it is only because their fixed size is larger
than the size requested by pci-epf-test.c
Adjust the test such that in case a fixed size BAR is detected, the fixed
BAR size is used, as that is the only possible option.
This helps with test failures reported as follows:
pci_epf_test pci_epf_test.0: requested BAR size is larger than fixed size
pci_epf_test pci_epf_test.0: Failed to allocate space for BAR4
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250905184240.144431-1-marek.vasut+renesas@mailbox.org
|
|
5da3d94a23c6 ("PCI: mvebu: Use for_each_of_range() iterator for parsing
"ranges"") simplified code by using the for_each_of_range() iterator, but
it broke PCI enumeration on Turris Omnia (and probably other mvebu
targets).
Issue #1:
To determine range.flags, of_pci_range_parser_one() uses bus->get_flags(),
which resolves to of_bus_pci_get_flags(), which already returns an
IORESOURCE bit field, and NOT the original flags from the "ranges"
resource.
Then mvebu_get_tgt_attr() attempts the very same conversion again. Remove
the misinterpretation of range.flags in mvebu_get_tgt_attr(), to restore
the intended behavior.
Issue #2:
The driver needs target and attributes, which are encoded in the raw
address values of the "/soc/pcie/ranges" resource. According to
of_pci_range_parser_one(), the raw values are stored in range.bus_addr and
range.parent_bus_addr, respectively. range.cpu_addr is a translated version
of range.parent_bus_addr, and not relevant here.
Use the correct range structure member, to extract target and attributes.
This restores the intended behavior.
Fixes: 5da3d94a23c6 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"")
Reported-by: Jan Palus <jpalus@fastmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220479
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Tony Dinh <mibodhi@gmail.com>
Tested-by: Jan Palus <jpalus@fastmail.com>
Link: https://patch.msgid.link/20250907102303.29735-1-klaus.kudielka@gmail.com
|
|
The Cadence PCIe Controller integrated in the TI K3 SoCs supports both
Root-Complex and Endpoint modes of operation. The Glue Layer allows
"strapping" the Mode of operation of the Controller, the Link Speed
and the Link Width. This is enabled by programming the "PCIEn_CTRL"
register (n corresponds to the PCIe instance) within the CTRL_MMR
memory-mapped register space. The "reset-values" of the registers are
also different depending on the mode of operation.
Since the PCIe Controller latches onto the "reset-values" immediately
after being powered on, if the Glue Layer configuration is not done while
the PCIe Controller is off, it will result in the PCIe Controller latching
onto the wrong "reset-values". In practice, this will show up as a wrong
representation of the PCIe Controller's capability structures in the PCIe
Configuration Space. Some such capabilities which are supported by the PCIe
Controller in the Root-Complex mode but are incorrectly latched onto as
being unsupported are:
- Link Bandwidth Notification
- Alternate Routing ID (ARI) Forwarding Support
- Next capability offset within Advanced Error Reporting (AER) capability
Fix this by powering off the PCIe Controller before programming the "strap"
settings and powering it on after that. The runtime PM APIs namely
pm_runtime_put_sync() and pm_runtime_get_sync() will decrement and
increment the usage counter respectively, causing GENPD to power off and
power on the PCIe Controller.
Fixes: f3e25911a430 ("PCI: j721e: Add TI J721E PCIe driver")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250908120828.1471776-1-s-vadapalli@ti.com
|
|
The dev_err_probe() doesn't do anything when error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just
return the value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
[mani: reworded the subject]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
The 'info' parameter of hv_msi_free() is unused. Delete it.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
|
|
When the 3.3Vaux supply is present, fetch it at the probe time and keep it
enabled for the entire PCIe controller lifecycle so that the link can enter
L2 state and the devices can signal wakeup using either Beacon or WAKE#
mechanisms.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: reworded the subject, description and error message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250820022328.2143374-1-hongxing.zhu@nxp.com
|
|
Correct a typo in the macro names GEN3_EQ_FMDC_MAX_PRE_CURSOR_DELTA and
GEN3_EQ_FMDC_MAX_POST_CURSOR_DELTA.
Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20250904065225.1762793-3-ziyue.zhang@oss.qualcomm.com
|
|
Add lane equalization setting for 8.0 GT/s and 32.0 GT/s to enhance link
stability and avoid AER Correctable Errors reported on some platforms
(eg. SA8775P).
8.0 GT/s, 16.0 GT/s and 32.0 GT/s require the same equalization setting.
This setting is programmed into a group of shadow registers, which can be
switched to configure equalization for different speeds by writing 00b,
01b and 10b to `RATE_SHADOW_SEL`.
Hence, program equalization registers in a loop using link speed as index,
so that equalization setting can be programmed for 8.0 GT/s, 16.0 GT/s
and 32.0 GT/s.
Fixes: 489f14be0e0a ("arm64: dts: qcom: sa8775p: Add pcie0 and pcie1 nodes")
Co-developed-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com>
[mani: wrapped the warning to fit 100 columns, used post-increment for loop]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250904065225.1762793-2-ziyue.zhang@oss.qualcomm.com
|
|
When reporting an error, the AER driver prints the TLP Header / Prefix Log
only for errors enumerated in the AER_LOG_TLP_MASKS macro.
The macro was never amended since its introduction in 2006 with commit
6c2b374d7485 ("PCI-Express AER implemetation: AER core and aerdriver").
At the time, PCIe r1.1 was the latest spec revision.
Amend the macro with errors defined since then to avoid omitting the TLP
Header / Prefix Log for newer errors.
The order of the errors in AER_LOG_TLP_MASKS follows PCIe r1.1 sec 6.2.7
rather than 7.10.2, because only the former documents for which errors a
TLP Header / Prefix is logged. Retain this order. The section number is
still 6.2.7 in today's PCIe r7.0.
For Completion Timeouts, the TLP Header / Prefix is only logged if the
Completion Timeout Prefix / Header Log Capable bit is set in the AER
Capabilities and Control register. Introduce a tlp_header_logged() helper
to check whether the TLP Header / Prefix Log is populated and use it in
the two places which currently match against AER_LOG_TLP_MASKS directly.
For Uncorrectable Internal Errors, logging of the TLP Header / Prefix is
optional per PCIe r7.0 sec 6.2.7. If needed, drivers could indicate
through a flag whether devices are capable and tlp_header_logged() could
then check that flag.
pcitools introduced macros for newer errors with commit 144b0911cc0b
("ls-ecaps: extend decode support for more fields for AER CE and UE
status"):
https://git.kernel.org/pub/scm/utils/pciutils/pciutils.git/commit/?id=144b0911cc0b
Unfortunately some of those macros are overly long:
PCI_ERR_UNC_POISONED_TLP_EGRESS
PCI_ERR_UNC_DMWR_REQ_EGRESS_BLOCKED
PCI_ERR_UNC_IDE_CHECK
PCI_ERR_UNC_MISR_IDE_TLP
PCI_ERR_UNC_PCRC_CHECK
PCI_ERR_UNC_TLP_XLAT_EGRESS_BLOCKED
This seems unsuitable for <linux/pci_regs.h>, so shorten to:
PCI_ERR_UNC_POISON_BLK
PCI_ERR_UNC_DMWR_BLK
PCI_ERR_UNC_IDE_CHECK
PCI_ERR_UNC_MISR_IDE
PCI_ERR_UNC_PCRC_CHECK
PCI_ERR_UNC_XLAT_BLK
Note that some of the existing macros in <linux/pci_regs.h> do not match
exactly with pcitools (e.g. PCI_ERR_UNC_SDES versus PCI_ERR_UNC_SURPDN),
so it does not seem mandatory for them to be identical.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/5f707caf1260bd8f15012bb032f7da9a9b898aba.1756712066.git.lukas@wunner.de
|
|
pci_has_p2pmem() is not used outside of p2pdma.c, and there is no need to
export it for use by modules.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://patch.msgid.link/d40f3f1decf54c9236bc38b48a6aae612a5c182f.1756900291.git.leon@kernel.org
|
|
Fix incorrect argument order in devm_kcalloc() when allocating port->phys.
The original call used sizeof(phy) as the number of elements and
port->lanes as the element size, which is reversed. While this happens to
produce the correct total allocation size with current pointer size and
lane counts, the argument order is wrong.
Fixes: 6fe7c187e026 ("PCI: tegra: Support per-lane PHYs")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
[mani: added Fixes tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250819150436.3105973-1-alok.a.tiwari@oracle.com
|
|
With the introduction of the of_msi_xlate() function, the OF layer
provides an API to map a device ID and retrieve the MSI controller
node the ID is mapped to with a single call.
of_msi_map_id() is currently used to map a deviceID to a specific
MSI controller node; of_msi_xlate() can be used for that purpose
too, there is no need to keep the two functions.
Convert of_msi_map_id() to of_msi_xlate() calls and update the
of_msi_xlate() documentation to describe how the struct device_node
pointer passed in should be set-up to either provide the MSI controller
node target or receive its pointer upon mapping completion.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250805133443.936955-1-lpieralisi@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The era of hand-rolled HIWORD_UPDATE macros is over.
Like many other Rockchip drivers, pcie-dw-rockchip brings with it its
very own flavour of HIWORD_UPDATE. It's occasionally used without a
constant mask, which complicates matters. HIWORD_UPDATE_BIT is a
confusingly named addition, as it doesn't update the bit, it actually
sets all bits in the value to 1. HIWORD_DISABLE_BIT is similarly
confusing; it disables several bits at once by using the value as a mask
and the inverse of value as the value, and the "disabling only these"
effect comes from the hardware actually using the mask. The more obvious
approach would've been HIWORD_UPDATE(val, 0) in my opinion.
This is part of the motivation why this patch uses hw_bitfield.h's
FIELD_PREP_WM16 instead, where possible. FIELD_PREP_WM16 requires a
constant bit mask, which isn't possible where the irq number is used to
generate a bit mask. For that purpose, we replace it with a more robust
macro than what was there but that should also bring close to zero
runtime overhead: we actually mask the IRQ number to make sure we're not
writing garbage.
For the remaining bits, there also are some caveats. For starters, the
PCIE_CLIENT_ENABLE_LTSSM and PCIE_CLIENT_DISABLE_LTSSM were named in a
manner that isn't quite truthful to what they do. Their modification
actually spans not just the LTSSM bit but also another bit, flipping
only the LTSSM one, but keeping the other (which according to the TRM
has a reset value of 0) always enabled. This other bit is reserved as of
the IP version RK3588 uses at least, and I have my doubts as to whether
it was meant to be set, and whether it was meant to be set in that code
path. Either way, it's confusing.
Replace it with just writing either 1 or 0 to the LTSSM bit, using the
new FIELD_PREP_WM16 macro from hw_bitfield.h, which grants us the
benefit of better compile-time error checking.
The change of no longer setting the reserved bit doesn't appear to
change the behaviour on RK3568 in RC mode, where it's not marked as
reserved.
PCIE_CLIENT_RC_MODE/PCIE_CLIENT_EP_MODE was another field that wasn't
super clear on what the bit field modification actually is. As far as I
can tell, switching to RC mode doesn't actually write the correct value
to the field if any of its bits have been set previously, as it only
updates one bit of a 4 bit field.
Replace it by actually writing the full values to the field, using the
new FIELD_PREP_WM16 macro, which grants us the benefit of better
compile-time error checking.
This patch was tested on RK3588 (PCIe3 x4 controller), RK3576 (PCIe2 x1
controller) and RK3568 (PCIe x2 controller), all in RC mode.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
The era of hand-rolled HIWORD_UPDATE macros is over, at least for those
drivers that use constant masks.
The Rockchip PCI driver, like many other Rockchip drivers, has its very
own definition of HIWORD_UPDATE.
Remove it, and replace its usage with either FIELD_PREP_WM16, or two new
header local macros for setting/clearing a bit with the high mask, which
use FIELD_PREP_WM16_CONST internally. In the process, ENCODE_LANES
needed to be adjusted, as FIELD_PREP_WM16* shifts the value for us.
That this is equivalent was verified by first making all FIELD_PREP_WM16
instances FIELD_PREP_WM16_CONST, then doing a static_assert() comparing
it to the old macro (and for those with parameters, static_asserting for
the full range of possible values with the old encode macro).
What we get out of this is compile time error checking to make sure the
value actually fits in the mask, and that the mask fits in the register,
and also generally less icky code that writes shifted values when it
actually just meant to set and clear a handful of bits.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
For MSI controllers which only support MSI_FLAG_PCI_MSI_MASK_PARENT, the
newly added callback irq_startup() and irq_shutdown() for
pci_msi[x]_template will not unmask or mask the interrupt when startup()
resp. shutdown() is invoked. This prevents the interrupt from being
enabled resp. disabled.
Invoke irq_[un]mask_parent() in cond_[startup|shutdown]_parent(), when the
interrupt has the MSI_FLAG_PCI_MSI_MASK_PARENT flag set.
Fixes: 54f45a30c0d0 ("PCI/MSI: Add startup/shutdown for per device domains")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Wei Fang <wei.fang@nxp.com>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox/SG2042
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/all/20250827230943.17829-1-inochiama@gmail.com
Closes: https://lore.kernel.org/regressions/aK4O7Hl8NCVEMznB@monster/
Closes: https://lore.kernel.org/regressions/20250826220959.GA4119563@ax162/
Closes: https://lore.kernel.org/all/20250827093911.1218640-1-wei.fang@nxp.com/
|
|
Commit a2790bf81f0f ("PCI: j721e: Add support to build as a loadable
module") added support to build the driver as a loadable module. However,
it did not add MODULE_DEVICE_TABLE() which is required for autoloading the
driver based on device table when it is built as a loadable module.
Fix it by adding MODULE_DEVICE_TABLE.
Fixes: a2790bf81f0f ("PCI: j721e: Add support to build as a loadable module")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250901120359.3410774-1-s-vadapalli@ti.com
|
|
Replace lock/unlock pairs with guards to simplify and tidy up the code.
Generated-by: Coccinelle SmPL
Signed-off-by: Erick Karanja <karanja99erick@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://patch.msgid.link/20250828093556.810911-1-karanja99erick@gmail.com
|
|
pci_acpi_preserve_config() leaks memory by returning early without freeing
the ACPI object on success. Fix that by always freeing the obj, which is
not needed by the caller.
Fixes: 9d7d5db8e78e ("PCI: Move PRESERVE_BOOT_CONFIG _DSM evaluation to pci_register_host_bridge()")
Signed-off-by: Nirmoy Das <nirmoyd@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250825214642.142135-1-nirmoyd@nvidia.com
|
|
PCIe r6.0 defined five additional errors in the Uncorrectable Error
Status, Mask and Severity Registers (PCIe r7.0 sec 7.8.4.2ff).
lspci has been supporting them since commit 144b0911cc0b ("ls-ecaps:
extend decode support for more fields for AER CE and UE status"):
https://git.kernel.org/pub/scm/utils/pciutils/pciutils.git/commit/?id=144b0911cc0b
Amend the AER driver to recognize them as well, instead of logging them as
"Unknown Error Bit".
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/21f1875b18d4078c99353378f37dcd6b994f6d4e.1756301211.git.lukas@wunner.de
|
|
Make sure to drop the reference to the pwrctrl device taken by
of_find_device_by_node() when stopping a PCI device.
Fixes: 681725afb6b9 ("PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org # v6.13
Link: https://patch.msgid.link/20250721153609.8611-4-johan+linaro@kernel.org
|
|
Make sure to drop the references to the pwrctrl OF node and device taken by
of_pci_find_child_device() and of_find_device_by_node() respectively when
scanning the bus.
Fixes: 957f40d039a9 ("PCI/pwrctrl: Move creation of pwrctrl devices to pci_scan_device()")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org # v6.15
Link: https://patch.msgid.link/20250721153609.8611-3-johan+linaro@kernel.org
|
|
Make sure to drop the reference to the pwrctrl device taken by
of_find_device_by_node() when registering a PCI device.
Fixes: b458ff7e8176 ("PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org # v6.13
Link: https://patch.msgid.link/20250721153609.8611-2-johan+linaro@kernel.org
|
|
The qcom_pcie_parse_ports() function currently iterates over all available
child nodes of the PCIe controller's device tree node. This includes
unrelated nodes such as OPP (Operating Performance Points) nodes, which do
not contain the expected 'reset' and 'phy' properties. As a result, parsing
fails and the driver falls back to the legacy method of parsing the
controller node directly. However, this fallback also fails when properties
are shifted to the Root Port node, leading to probe failure.
Fix this by restricting the parsing logic to only consider child nodes with
device_type = "pci", which is the expected and required property for PCIe
bridge nodes as per the pci-bus-common.yaml dtschema.
Fixes: a2fbecdbbb9d ("PCI: qcom: Add support for parsing the new Root Port binding")
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250826-pakala-v3-3-721627bd5bb0@oss.qualcomm.com
|
|
Replace calls of devm_kzalloc() with devm_kcalloc() in ks_pcie_probe().
As noted in the kernel documentation [1], open-coded multiplication in
allocator arguments is discouraged because it can lead to integer
overflow.
Using devm_kcalloc() provides built-in overflow protection, making the
memory allocation safer when calculating the allocation size compared
to explicit multiplication.
[1]: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20250819131235.152967-1-rongqianfeng@vivo.com
|
|
Starting with commit dd26c1a23fd5 ("PCI: rcar-host: Switch to
msi_create_parent_irq_domain()"), the MSI parent IRQ domain is NULL because
the object of type struct irq_domain_info passed to:
msi_create_parent_irq_domain() ->
irq_domain_instantiate()() ->
__irq_domain_instantiate()
has no reference to the parent IRQ domain. Using msi->domain->parent as an
argument for generic_handle_domain_irq() leads to below error:
"Unable to handle kernel NULL pointer dereference at virtual address"
This error was identified while switching the upcoming RZ/G3S PCIe host
controller driver to msi_create_parent_irq_domain() (which was using a
similar pattern to handle MSIs (see link section)), but it was not tested
on hardware using the pcie-rcar-host controller driver due to lack of
hardware.
Fixes: dd26c1a23fd5 ("PCI: rcar-host: Switch to msi_create_parent_irq_domain()")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/all/20250704161410.3931884-6-claudiu.beznea.uj@bp.renesas.com
Link: https://patch.msgid.link/20250809144447.3939284-1-claudiu.beznea.uj@bp.renesas.com
|
|
As the RISC-V PLIC cannot apply affinity settings without invoking
irq_enable(), it will make the interrupt unavailble when used as an
underlying interrupt chip for the MSI controller.
Implement the irq_startup() and irq_shutdown() callbacks for the PCI MSI
and MSI-X templates.
For chips that specify MSI_FLAG_PCI_MSI_STARTUP_PARENT, the parent startup
and shutdown functions are invoked. That allows the interrupt on the parent
chip to be enabled if the interrupt has not been enabled during
allocation. This is necessary for MSI controllers which use PLIC as
underlying parent interrupt chip.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/all/20250813232835.43458-3-inochiama@gmail.com
|
|
The PCI capability/extended capability offsets are not guaranteed to be the
same across all SoCs integrating the Cadence PCIe IP.
Use the cdns_pcie_find_{ext}_capability() APIs to find the capabilities,
which avoids hardcoding the offsets in the driver.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250813144529.303548-7-18255117159@163.com
|
|
The PCI core now provides generic PCI_FIND_NEXT_CAP() and
PCI_FIND_NEXT_EXT_CAP() macros to search for PCI capabilities, using
config accessors we supply.
Use them in the CDNS driver to add cdns_pcie_find_capability() and
cdns_pcie_find_ext_capability() interfaces.
Signed-off-by: Hans Zhang <18255117159@163.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250813144529.303548-6-18255117159@163.com
|
|
The PCI core now provides generic PCI_FIND_NEXT_CAP() macros to search for
PCI capabilities, using config accessors we supply.
Use them in the DWC EP driver to implement dw_pcie_ep_find_capability()
instead of duplicating the algorithm.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250819145828.438541-1-18255117159@163.com
|
|
The error handling path in pci_p2pdma_add_resource() contains a bug in its
`pgmap_free` label.
Memory is allocated for the `p2p_pgmap` struct, and the pointer is stored
in `p2p_pgmap`. However, the error path calls devm_kfree() with `pgmap`,
which is a pointer to a member field within the `p2p_pgmap` struct, not the
base pointer of the allocation.
Correct the bug by passing the correct base pointer, `p2p_pgmap`, to
devm_kfree().
Signed-off-by: Sungho Kim <sungho.kim@furiosa.ai>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://patch.msgid.link/20250820105714.2939896-1-sungho.kim@furiosa.ai
|
|
Introduce support for the PCI-Express Gen3 controller found in the
MT8196 (and MT6991) SoC by adding a compatible string and platform
specific data.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250703120847.121826-4-angelogioacchino.delregno@collabora.com
|
|
In preparation to add support for the PCI-Express Gen3 controller
found in newer MediaTek SoCs, such as the Dimensity 9400 MT6991
and the MT8196 Chromebook SoC, add the definition for the PCIE
Resource Control register and a new sys_clk_rdy_time_us variable
in platform data.
If sys_clk_rdy_time_us is found (> 0), set the new value in the
aforementioned register only after configuring the controller to
RC mode, as this may otherwise be reset.
Overriding the register defaults for SYS_CLK_RDY_TIME allows to
work around sys_clk_rdy signal glitching in MT6991 and MT8196.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[mani: used FIELD_MODIFY() to simplify mask and update]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250703120847.121826-2-angelogioacchino.delregno@collabora.com
|
|
Issue uevents on s390 during PCI recovery using pci_uevent_ers() as done by
EEH and AER PCIe recovery routines.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/20250807-add_err_uevents-v5-2-adf85b0620b0@linux.ibm.com
|
|
Since commit 7b42d97e99d3 ("PCI/ERR: Always report current recovery
status for udev") AER uses the result of error_detected() as parameter
to pci_uevent_ers(). As pci_uevent_ers() however does not handle
PCI_ERS_RESULT_NEED_RESET this results in a missing uevent for the
beginning of recovery if drivers request a reset. Fix this by treating
PCI_ERS_RESULT_NEED_RESET as beginning recovery.
Fixes: 7b42d97e99d3 ("PCI/ERR: Always report current recovery status for udev")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250807-add_err_uevents-v5-1-adf85b0620b0@linux.ibm.com
|
|
The PCI core now provides generic PCI_FIND_NEXT_CAP() and
PCI_FIND_NEXT_EXT_CAP() macros to search for PCI capabilities, using
config accessors we supply.
Use them in the DWC driver to implement dw_pcie_find_capability() and
dw_pcie_find_ext_capability() instead of duplicating the algorithm.
Signed-off-by: Hans Zhang <18255117159@163.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250813144529.303548-5-18255117159@163.com
|
|
Move the extended Capability search logic into a PCI_FIND_NEXT_EXT_CAP()
macro that accepts a config space accessor function as an argument. This
enables controller drivers to perform Capability discovery using their
early access mechanisms prior to full device initialization while sharing
the Capability search code.
Convert the existing PCI core extended Capability search implementation to
use PCI_FIND_NEXT_EXT_CAP().
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://patch.msgid.link/20250813144529.303548-4-18255117159@163.com
|
