| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 0f0d2c876c96d4908a9ef40959a44bec21bdd6cf ]
If Doorbell Buffer Config command fails even 'dev->dbbuf_dbs != NULL'
which means OACS indicates that NVME_CTRL_OACS_DBBUF_SUPP is set,
nvme_dbbuf_update_and_check_event() will check event even it's not been
successfully set.
This patch fixes mismatch among dbbuf for sq/cqs in case that dbbuf
command fails.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 65c5a055b0d567b7e7639d942c0605da9cc54c5e ]
The offending commit breaks BLKROSET ioctl because a device
revalidation will blindly override BLKROSET setting. Hence,
we remove the disk rw setting in case NVME_NS_ATTR_RO is cleared
from by the controller.
Fixes: 1293477f4f32 ("nvme: set gendisk read only based on nsattr")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f9d5f4579feafa721dba2f350fc064a1852c6f8c ]
Ensure that there can't be any I/O in flight went we change the disk
geometry in nvme_update_ns_info, most notable the LBA size by lifting
the queue free from nvme_update_disk_info into the caller
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d4609ea8b3d3fb3423f35805843a82774cb4ef2f ]
Factor out a helper from nvme_update_ns_info that configures the
per-namespaces metadata and PI settings. Also make sure the helpers
clear the flags explicitly instead of all of ->features to allow for
potentially reusing ->features for future non-metadata flags.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0a8a2c85b83589a5c10bc5564b796836bf4b4984 ]
The request may be executed asynchronously, and rq->state may be
changed to IDLE. To avoid repeated request completion, only
MQ_RQ_COMPLETE of rq->state is checked in nvme_tcp_complete_timed_out.
It is not safe, so need adding check IDLE for rq->state.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fdf58e02adecbef4c7cbb2073d8ea225e6fd5f26 ]
The request may be executed asynchronously, and rq->state may be
changed to IDLE. To avoid repeated request completion, only
MQ_RQ_COMPLETE of rq->state is checked in nvme_rdma_complete_timed_out.
It is not safe, so need adding check IDLE for rq->state.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d6f66210f4b1aa2f5944f0e34e0f8db44f499f92 ]
Now use teardown_lock to serialize for time out and tear down. This may
cause abnormal: first cancel all request in tear down, then time out may
complete the request again, but the request may already be freed or
restarted.
To avoid race between time out and tear down, in tear down process,
first we quiesce the queue, and then delete the timer and cancel
the time out work for the queue. At the same time we need to delete
teardown_lock.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3017013dcc82a4862bd1e140f8b762cfc594008d ]
Now use teardown_lock to serialize for time out and tear down. This may
cause abnormal: first cancel all request in tear down, then time out may
complete the request again, but the request may already be freed or
restarted.
To avoid race between time out and tear down, in tear down process,
first we quiesce the queue, and then delete the timer and cancel
the time out work for the queue. At the same time we need to delete
teardown_lock.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 04800fbff4764ab7b32c49d19628605a5d4cb85c ]
Introduce sync io queues for some scenarios which just only need sync
io queues not sync all queues.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 38210800bf66d7302da1bb5b624ad68638da1562 ]
Multiple CPUs may be mapped to the same hctx, allowing mulitple
submission contexts to attempt commit_rqs(). We need to verify we're
not writing the same doorbell value multiple times since that's a spec
violation.
Revert commit 54b2fcee1db041a83b52b51752dade6090cf952f.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1878596
Reported-by: "B.L. Jones" <brandon.gustav@googlemail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3c3751f2daf6675f6b5bee83b792354c272f5bd2 ]
When target side trace in turned on and flush command is issued from the
host it results in the following Oops.
[ 856.789724] BUG: kernel NULL pointer dereference, address: 0000000000000068
[ 856.790686] #PF: supervisor read access in kernel mode
[ 856.791262] #PF: error_code(0x0000) - not-present page
[ 856.791863] PGD 6d7110067 P4D 6d7110067 PUD 66f0ad067 PMD 0
[ 856.792527] Oops: 0000 [#1] SMP NOPTI
[ 856.792950] CPU: 15 PID: 7034 Comm: nvme Tainted: G OE 5.9.0nvme-5.9+ #71
[ 856.793790] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e3214
[ 856.794956] RIP: 0010:trace_event_raw_event_nvmet_req_init+0x13e/0x170 [nvmet]
[ 856.795734] Code: 41 5c 41 5d c3 31 d2 31 f6 e8 4e 9b b8 e0 e9 0e ff ff ff 49 8b 55 00 48 8b 38 8b 0
[ 856.797740] RSP: 0018:ffffc90001be3a60 EFLAGS: 00010246
[ 856.798375] RAX: 0000000000000000 RBX: ffff8887e7d2c01c RCX: 0000000000000000
[ 856.799234] RDX: 0000000000000020 RSI: 0000000057e70ea2 RDI: ffff8887e7d2c034
[ 856.800088] RBP: ffff88869f710578 R08: ffff888807500d40 R09: 00000000fffffffe
[ 856.800951] R10: 0000000064c66670 R11: 00000000ef955201 R12: ffff8887e7d2c034
[ 856.801807] R13: ffff88869f7105c8 R14: 0000000000000040 R15: ffff88869f710440
[ 856.802667] FS: 00007f6a22bd8780(0000) GS:ffff888813a00000(0000) knlGS:0000000000000000
[ 856.803635] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 856.804367] CR2: 0000000000000068 CR3: 00000006d73e0000 CR4: 00000000003506e0
[ 856.805283] Call Trace:
[ 856.805613] nvmet_req_init+0x27c/0x480 [nvmet]
[ 856.806200] nvme_loop_queue_rq+0xcb/0x1d0 [nvme_loop]
[ 856.806862] blk_mq_dispatch_rq_list+0x123/0x7b0
[ 856.807459] ? kvm_sched_clock_read+0x14/0x30
[ 856.808025] __blk_mq_sched_dispatch_requests+0xc7/0x170
[ 856.808708] blk_mq_sched_dispatch_requests+0x30/0x60
[ 856.809372] __blk_mq_run_hw_queue+0x70/0x100
[ 856.809935] __blk_mq_delay_run_hw_queue+0x156/0x170
[ 856.810574] blk_mq_run_hw_queue+0x86/0xe0
[ 856.811104] blk_mq_sched_insert_request+0xef/0x160
[ 856.811733] blk_execute_rq+0x69/0xc0
[ 856.812212] ? blk_mq_rq_ctx_init+0xd0/0x230
[ 856.812784] nvme_execute_passthru_rq+0x57/0x130 [nvme_core]
[ 856.813461] nvme_submit_user_cmd+0xeb/0x300 [nvme_core]
[ 856.814099] nvme_user_cmd.isra.82+0x11e/0x1a0 [nvme_core]
[ 856.814752] blkdev_ioctl+0x1dc/0x2c0
[ 856.815197] block_ioctl+0x3f/0x50
[ 856.815606] __x64_sys_ioctl+0x84/0xc0
[ 856.816074] do_syscall_64+0x33/0x40
[ 856.816533] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 856.817168] RIP: 0033:0x7f6a222ed107
[ 856.817617] Code: 44 00 00 48 8b 05 81 cd 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 8
[ 856.819901] RSP: 002b:00007ffca848f058 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[ 856.820846] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f6a222ed107
[ 856.821726] RDX: 00007ffca848f060 RSI: 00000000c0484e43 RDI: 0000000000000003
[ 856.822603] RBP: 0000000000000003 R08: 000000000000003f R09: 0000000000000005
[ 856.823478] R10: 00007ffca848ece0 R11: 0000000000000202 R12: 00007ffca84912d3
[ 856.824359] R13: 00007ffca848f4d0 R14: 0000000000000002 R15: 000000000067e900
[ 856.825236] Modules linked in: nvme_loop(OE) nvmet(OE) nvme_fabrics(OE) null_blk nvme(OE) nvme_corel
Move the nvmet_req_init() tracepoint after we parse the command in
nvmet_req_init() so that we can get rid of the duplicate
nvmet_find_namespace() call.
Rename __assign_disk_name() -> __assign_req_name(). Now that we call
tracepoint after parsing the command simplify the newly added
__assign_req_name() which fixes this bug.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 25c1ca6ecaba3b751d3f7ff92d5cddff3b05f8d0 ]
Receiving a zero length message leads to the following warnings because
the CQE is processed twice:
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 0 at lib/refcount.c:28
RIP: 0010:refcount_warn_saturate+0xd9/0xe0
Call Trace:
<IRQ>
nvme_rdma_recv_done+0xf3/0x280 [nvme_rdma]
__ib_process_cq+0x76/0x150 [ib_core]
...
Sanity check the received data length, to avoids this.
Thanks to Chao Leng & Sagi for suggestions.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 43efdb8e870ee0f58633fd579aa5b5185bf5d39e ]
A crash can happened when a connect is rejected. The host establishes
the connection after received ConnectReply, and then continues to send
the fabrics Connect command. If the controller does not receive the
ReadyToUse capsule, host may receive a ConnectReject reply.
Call nvme_rdma_destroy_queue_ib after the host received the
RDMA_CM_EVENT_REJECTED event. Then when the fabrics Connect command
times out, nvme_rdma_timeout calls nvme_rdma_complete_rq to fail the
request. A crash happenes due to use after free in
nvme_rdma_complete_rq.
nvme_rdma_destroy_queue_ib is redundant when handling the
RDMA_CM_EVENT_REJECTED event as nvme_rdma_destroy_queue_ib is already
called in connection failure handler.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit df06047d54276f73782c9d97882b305fca745d3f ]
nvmet_passthru_map_sg() only supports mapping a single BIO, not a chain
so the effective maximum transfer should also be limitted by
BIO_MAX_PAGES (presently this works out to 1MB).
For PCI passthru devices the max_sectors would typically be more
limitting than BIO_MAX_PAGES, but this may not be true for all passthru
devices.
Fixes: c1fef73f793b ("nvmet: add passthru code to process commands")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 85bd23f3dc09a2ae9e56885420e52c54bf983713 ]
When connecting a controller with a zero kato value using the following
command line
nvme connect -t tcp -n NQN -a ADDR -s PORT --keep-alive-tmo=0
the warning below can be reproduced:
WARNING: CPU: 1 PID: 241 at kernel/workqueue.c:1627 __queue_delayed_work+0x6d/0x90
with trace:
mod_delayed_work_on+0x59/0x90
nvmet_update_cc+0xee/0x100 [nvmet]
nvmet_execute_prop_set+0x72/0x80 [nvmet]
nvmet_tcp_try_recv_pdu+0x2f7/0x770 [nvmet_tcp]
nvmet_tcp_io_work+0x63f/0xb2d [nvmet_tcp]
...
This is caused by queuing up an uninitialized work. Althrough the
keep-alive timer is disabled during allocating the controller (fixed in
0d3b6a8d213a), ka_work still has a chance to run (called by
nvmet_start_ctrl).
Fixes: 0d3b6a8d213a ("nvmet: Disable keep-alive timer when kato is cleared to 0h")
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 936fab503ff4af94f5f9c0b549f3ab4d435500ec ]
nvme_submit_sync_cmd can return positive NVMe error codes in addition to
the negative Linux error code, which are currently ignored. Fix this
by removing __nvme_ns_report_zones and handling the errors from
nvme_submit_sync_cmd in the caller instead of multiplexing the return
value and the number of zones reported into a single return value.
Fixes: 240e6ee272c0 ("nvme: support for zoned namespaces")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Pull block fixes from Jens Axboe:
"A few fixes that should go into this release:
- NVMe controller error path reference fix (Chaitanya)
- Fix regression with IBM partitions on non-dasd devices (Christoph)
- Fix a missing clear in the compat CDROM packet structure (Peilin)"
* tag 'block5.9-2020-10-08' of git://git.kernel.dk/linux-block:
partitions/ibm: fix non-DASD devices
nvme-core: put ctrl ref when module ref get fail
block/scsi-ioctl: Fix kernel-infoleak in scsi_put_cdrom_generic_arg()
|
|
When try_module_get() fails in the nvme_dev_open() it returns without
releasing the ctrl reference which was taken earlier.
Put the ctrl reference which is taken before calling the
try_module_get() in the error return code path.
Fixes: 52a3974feb1a "nvme-core: get/put ctrl and transport module in nvme_dev_open/release()"
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull networking fixes from David Miller:
1) Make sure SKB control block is in the proper state during IPSEC
ESP-in-TCP encapsulation. From Sabrina Dubroca.
2) Various kinds of attributes were not being cloned properly when we
build new xfrm_state objects from existing ones. Fix from Antony
Antony.
3) Make sure to keep BTF sections, from Tony Ambardar.
4) TX DMA channels need proper locking in lantiq driver, from Hauke
Mehrtens.
5) Honour route MTU during forwarding, always. From Maciej
Żenczykowski.
6) Fix races in kTLS which can result in crashes, from Rohit
Maheshwari.
7) Skip TCP DSACKs with rediculous sequence ranges, from Priyaranjan
Jha.
8) Use correct address family in xfrm state lookups, from Herbert Xu.
9) A bridge FDB flush should not clear out user managed fdb entries
with the ext_learn flag set, from Nikolay Aleksandrov.
10) Fix nested locking of netdev address lists, from Taehee Yoo.
11) Fix handling of 32-bit DATA_FIN values in mptcp, from Mat Martineau.
12) Fix r8169 data corruptions on RTL8402 chips, from Heiner Kallweit.
13) Don't free command entries in mlx5 while comp handler could still be
running, from Eran Ben Elisha.
14) Error flow of request_irq() in mlx5 is busted, due to an off by one
we try to free and IRQ never allocated. From Maor Gottlieb.
15) Fix leak when dumping netlink policies, from Johannes Berg.
16) Sendpage cannot be performed when a page is a slab page, or the page
count is < 1. Some subsystems such as nvme were doing so. Create a
"sendpage_ok()" helper and use it as needed, from Coly Li.
17) Don't leak request socket when using syncookes with mptcp, from
Paolo Abeni.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
net/core: check length before updating Ethertype in skb_mpls_{push,pop}
net: mvneta: fix double free of txq->buf
net_sched: check error pointer in tcf_dump_walker()
net: team: fix memory leak in __team_options_register
net: typhoon: Fix a typo Typoon --> Typhoon
net: hinic: fix DEVLINK build errors
net: stmmac: Modify configuration method of EEE timers
tcp: fix syn cookied MPTCP request socket leak
libceph: use sendpage_ok() in ceph_tcp_sendpage()
scsi: libiscsi: use sendpage_ok() in iscsi_tcp_segment_map()
drbd: code cleanup by using sendpage_ok() to check page for kernel_sendpage()
tcp: use sendpage_ok() to detect misused .sendpage
nvme-tcp: check page by sendpage_ok() before calling kernel_sendpage()
net: add WARN_ONCE in kernel_sendpage() for improper zero-copy send
net: introduce helper sendpage_ok() in include/linux/net.h
net: usb: pegasus: Proper error handing when setting pegasus' MAC address
net: core: document two new elements of struct net_device
netlink: fix policy dump leak
net/mlx5e: Fix race condition on nhe->n pointer in neigh update
net/mlx5e: Fix VLAN create flow
...
|
|
Currently nvme_tcp_try_send_data() doesn't use kernel_sendpage() to
send slab pages. But for pages allocated by __get_free_pages() without
__GFP_COMP, which also have refcount as 0, they are still sent by
kernel_sendpage() to remote end, this is problematic.
The new introduced helper sendpage_ok() checks both PageSlab tag and
page_count counter, and returns true if the checking page is OK to be
sent by kernel_sendpage().
This patch fixes the page checking issue of nvme_tcp_try_send_data()
with sendpage_ok(). If sendpage_ok() returns true, send this page by
kernel_sendpage(), otherwise use sock_no_sendpage to handle this page.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jan Kara <jack@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Vlastimil Babka <vbabka@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull block fixes from Jens Axboe:
"NVMe pull request from Christoph, and removal of a dead define.
- fix error during controller probe that cause double free irqs
(Keith Busch)
- FC connection establishment fix (James Smart)
- properly handle completions for invalid tags (Xianting Tian)
- pass the correct nsid to the command effects and supported log
(Chaitanya Kulkarni)"
* tag 'block-5.9-2020-09-25' of git://git.kernel.dk/linux-block:
block: remove unused BLK_QC_T_EAGAIN flag
nvme-core: don't use NVME_NSID_ALL for command effects and supported log
nvme-fc: fail new connections to a deleted host or remote port
nvme-pci: fix NULL req in completion handler
nvme: return errors for hwmon init
|
|
In the function nvme_get_effects_log() it uses NVME_NSID_ALL which has
namespace scope. The command effect log page is controller specific.
Replace NVME_NSID_ALL with 0x00 which specifies the controller scope
instead of namespace scope.
Fixes: 84fef62d135b ("nvme: check admin passthru command effects")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209287
Reported-by: Huai-Cheng Kuo <hh81478072@gmail.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull block fixes from Jens Axboe:
"A few NVMe fixes, and a dasd write zero fix"
* tag 'block-5.9-2020-09-22' of git://git.kernel.dk/linux-block:
nvmet: get transport reference for passthru ctrl
nvme-core: get/put ctrl and transport module in nvme_dev_open/release()
nvme-tcp: fix kconfig dependency warning when !CRYPTO
nvme-pci: disable the write zeros command for Intel 600P/P3100
s390/dasd: Fix zero write for FBA devices
|
|
The lldd may have made calls to delete a remote port or local port and
the delete is in progress when the cli then attempts to create a new
controller. Currently, this proceeds without error although it can't be
very successful.
Fix this by validating that both the host port and remote port are
present when a new controller is to be created.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Currently, we use nvmeq->q_depth as the upper limit for a valid tag in
nvme_handle_cqe(), it is not correct. Because the available tag number
is recorded in tagset, which is not equal to nvmeq->q_depth.
The nvme driver registers interrupts for queues before initializing the
tagset, because it uses the number of successful request_irq() calls to
configure the tagset parameters. This allows a race condition with the
current tag validity check if the controller happens to produce an
interrupt with a corrupted CQE before the tagset is initialized.
Replace the driver's indirect tag check with the one already provided by
the block layer.
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Initializing the nvme hwmon retrieves a log from the controller. If the
controller is broken, we need to return the appropriate error so that
subsequent initialization doesn't attempt to continue.
Reported-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Grab a reference to the transport driver to ensure it can't be unloaded
while a passthrough controller is active.
Fixes: c1fef73f793b ("nvmet: add passthru code to process commands")
Reported-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
|
|
Get and put the reference to the ctrl in the nvme_dev_open() and
nvme_dev_release() before and after module get/put for ctrl in char
device file operations.
Introduce char_dev relase function, get/put the controller and module
which allows us to fix the potential Oops which can be easily reproduced
with a passthru ctrl (although the problem also exists with pure user
access):
Entering kdb (current=0xffff8887f8290000, pid 3128) on processor 30 Oops: (null)
due to oops @ 0xffffffffa01019ad
CPU: 30 PID: 3128 Comm: bash Tainted: G W OE 5.8.0-rc4nvme-5.9+ #35
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.4
RIP: 0010:nvme_free_ctrl+0x234/0x285 [nvme_core]
Code: 57 10 a0 e8 73 bf 02 e1 ba 3d 11 00 00 48 c7 c6 98 33 10 a0 48 c7 c7 1d 57 10 a0 e8 5b bf 02 e1 8
RSP: 0018:ffffc90001d63de0 EFLAGS: 00010246
RAX: ffffffffa05c0440 RBX: ffff8888119e45a0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff8888177e9550 RDI: ffff8888119e43b0
RBP: ffff8887d4768000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffffc90001d63c90 R12: ffff8888119e43b0
R13: ffff8888119e5108 R14: dead000000000100 R15: ffff8888119e5108
FS: 00007f1ef27b0740(0000) GS:ffff888817600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa05c0470 CR3: 00000007f6bee000 CR4: 00000000003406e0
Call Trace:
device_release+0x27/0x80
kobject_put+0x98/0x170
nvmet_passthru_ctrl_disable+0x4a/0x70 [nvmet]
nvmet_passthru_enable_store+0x4c/0x90 [nvmet]
configfs_write_file+0xe6/0x150
vfs_write+0xba/0x1e0
ksys_write+0x5f/0xe0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f1ef1eb2840
Code: Bad RIP value.
RSP: 002b:00007fffdbff0eb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1ef1eb2840
RDX: 0000000000000002 RSI: 00007f1ef27d2000 RDI: 0000000000000001
RBP: 00007f1ef27d2000 R08: 000000000000000a R09: 00007f1ef27b0740
R10: 0000000000000001 R11: 0000000000000246 R12: 00007f1ef2186400
R13: 0000000000000002 R14: 0000000000000001 R15: 0000000000000000
With this patch fix we take the module ref count in nvme_dev_open() and
release that ref count in newly introduced nvme_dev_release().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When NVME_TCP is enabled and CRYPTO is disabled, it results in the
following Kbuild warning:
WARNING: unmet direct dependencies detected for CRYPTO_CRC32C
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- NVME_TCP [=y] && INET [=y] && BLK_DEV_NVME [=y]
The reason is that NVME_TCP selects CRYPTO_CRC32C without depending on or
selecting CRYPTO while CRYPTO_CRC32C is subordinate to CRYPTO.
Honor the kconfig menu hierarchy to remove kconfig dependency warnings.
Fixes: 79fd751d61aa ("nvme: tcp: selects CRYPTO_CRC32C for nvme-tcp")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The write zeros command does not work with 4k range.
bash-4.4# ./blkdiscard /dev/nvme0n1p2
bash-4.4# strace -efallocate xfs_io -c "fzero 536895488 2048" /dev/nvme0n1p2
fallocate(3, FALLOC_FL_ZERO_RANGE, 536895488, 2048) = 0
+++ exited with 0 +++
bash-4.4# dd bs=1 if=/dev/nvme0n1p2 skip=536895488 count=512 | hexdump -C
00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
00000200
bash-4.4# ./blkdiscard /dev/nvme0n1p2
bash-4.4# strace -efallocate xfs_io -c "fzero 536895488 4096" /dev/nvme0n1p2
fallocate(3, FALLOC_FL_ZERO_RANGE, 536895488, 4096) = 0
+++ exited with 0 +++
bash-4.4# dd bs=1 if=/dev/nvme0n1p2 skip=536895488 count=512 | hexdump -C
00000000 5c 61 5c b0 96 21 1b 5e 85 0c 07 32 9c 8c eb 3c |\a\..!.^...2...<|
00000010 4a a2 06 ca 67 15 2d 8e 29 8d a8 a0 7e 46 8c 62 |J...g.-.)...~F.b|
00000020 bb 4c 6c c1 6b f5 ae a5 e4 a9 bc 93 4f 60 ff 7a |.Ll.k.......O`.z|
Reported-by: Eric Sandeen <esandeen@redhat.com>
Signed-off-by: David Milburn <dmilburn@redhat.com>
Tested-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull block fixes from Jens Axboe:
- Fix a regression in bdev partition locking (Christoph)
- NVMe pull request from Christoph:
- cancel async events before freeing them (David Milburn)
- revert a broken race fix (James Smart)
- fix command processing during resets (Sagi Grimberg)
- Fix a kyber crash with requeued flushes (Omar)
- Fix __bio_try_merge_page() same_page error for no merging (Ritesh)
* tag 'block-5.9-2020-09-11' of git://git.kernel.dk/linux-block:
block: Set same_page to false in __bio_try_merge_page if ret is false
nvme-fabrics: allow to queue requests for live queues
block: only call sched requeue_request() for scheduled requests
nvme-tcp: cancel async events before freeing event struct
nvme-rdma: cancel async events before freeing event struct
nvme-fc: cancel async events before freeing event struct
nvme: Revert: Fix controller creation races with teardown flow
block: restore a specific error code in bdev_del_partition
|
|
Right now we are failing requests based on the controller state (which
is checked inline in nvmf_check_ready) however we should definitely
accept requests if the queue is live.
When entering controller reset, we transition the controller into
NVME_CTRL_RESETTING, and then return BLK_STS_RESOURCE for non-mpath
requests (have blk_noretry_request set).
This is also the case for NVME_REQ_USER for the wrong reason. There
shouldn't be any reason for us to reject this I/O in a controller reset.
We do want to prevent passthru commands on the admin queue because we
need the controller to fully initialize first before we let user passthru
admin commands to be issued.
In a non-mpath setup, this means that the requests will simply be
requeued over and over forever not allowing the q_usage_counter to drop
its final reference, causing controller reset to hang if running
concurrently with heavy I/O.
Fixes: 35897b920c8a ("nvme-fabrics: fix and refine state checks in __nvmf_check_ready")
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Cancel async event work in case async event has been queued up, and
nvme_tcp_submit_async_event() runs after event has been freed.
Signed-off-by: David Milburn <dmilburn@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Cancel async event work in case async event has been queued up, and
nvme_rdma_submit_async_event() runs after event has been freed.
Signed-off-by: David Milburn <dmilburn@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Cancel async event work in case async event has been queued up, and
nvme_fc_submit_async_event() runs after event has been freed.
Signed-off-by: David Milburn <dmilburn@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The indicated patch introduced a barrier in the sysfs_delete attribute
for the controller that rejects the request if the controller isn't
created. "Created" is defined as at least 1 call to nvme_start_ctrl().
This is problematic in error-injection testing. If an error occurs on
the initial attempt to create an association and the controller enters
reconnect(s) attempts, the admin cannot delete the controller until
either there is a successful association created or ctrl_loss_tmo
times out.
Where this issue is particularly hurtful is when the "admin" is the
nvme-cli, it is performing a connection to a discovery controller, and
it is initiated via auto-connect scripts. With the FC transport, if the
first connection attempt fails, the controller enters a normal reconnect
state but returns control to the cli thread that created the controller.
In this scenario, the cli attempts to read the discovery log via ioctl,
which fails, causing the cli to see it as an empty log and then proceeds
to delete the discovery controller. The delete is rejected and the
controller is left live. If the discovery controller reconnect then
succeeds, there is no action to delete it, and it sits live doing nothing.
Cc: <stable@vger.kernel.org> # v5.7+
Fixes: ce1518139e69 ("nvme: Fix controller creation races with teardown flow")
Signed-off-by: James Smart <james.smart@broadcom.com>
CC: Israel Rukshin <israelr@mellanox.com>
CC: Max Gurtovoy <maxg@mellanox.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Keith Busch <kbusch@kernel.org>
CC: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull block fixes from Jens Axboe:
"A bit larger than usual this week, mostly due to the NVMe fixes
arriving late for -rc3 and hence didn't make last weeks pull request.
- NVMe:
- instance leak and io boundary fixes from Keith
- fc locking fix from Christophe
- various tcp/rdma reset during traffic fixes from Sagi
- pci use-after-free fix from Tong
- tcp target null deref fix from Ziye
- Locking fix for partition removal (Christoph)
- Ensure bdi->io_pages is always set (me)
- Fixup for hd struct reference (Ming)
- Fix for zero length bvecs (Ming)
- Two small blk-iocost fixes (Tejun)"
* tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
block: allow for_each_bvec to support zero len bvec
blk-stat: make q->stats->lock irqsafe
blk-iocost: ioc_pd_free() shouldn't assume irq disabled
block: fix locking in bdev_del_partition
block: release disk reference in hd_struct_free_work
block: ensure bdi->io_pages is always initialized
nvme-pci: cancel nvme device request before disabling
nvme: only use power of two io boundaries
nvme: fix controller instance leak
nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()'
nvme: Fix NULL dereference for pci nvme controllers
nvme-rdma: fix reset hang if controller died in the middle of a reset
nvme-rdma: fix timeout handler
nvme-rdma: serialize controller teardown sequences
nvme-tcp: fix reset hang if controller died in the middle of a reset
nvme-tcp: fix timeout handler
nvme-tcp: serialize controller teardown sequences
nvme: have nvme_wait_freeze_timeout return if it timed out
nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance
nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu
|
|
This patch addresses an irq free warning and null pointer dereference
error problem when nvme devices got timeout error during initialization.
This problem happens when nvme_timeout() function is called while
nvme_reset_work() is still in execution. This patch fixed the problem by
setting flag of the problematic request to NVME_REQ_CANCELLED before
calling nvme_dev_disable() to make sure __nvme_submit_sync_cmd() returns
an error code and let nvme_submit_sync_cmd() fail gracefully.
The following is console output.
[ 62.472097] nvme nvme0: I/O 13 QID 0 timeout, disable controller
[ 62.488796] nvme nvme0: could not set timestamp (881)
[ 62.494888] ------------[ cut here ]------------
[ 62.495142] Trying to free already-free IRQ 11
[ 62.495366] WARNING: CPU: 0 PID: 7 at kernel/irq/manage.c:1751 free_irq+0x1f7/0x370
[ 62.495742] Modules linked in:
[ 62.495902] CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.8.0+ #8
[ 62.496206] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-p4
[ 62.496772] Workqueue: nvme-reset-wq nvme_reset_work
[ 62.497019] RIP: 0010:free_irq+0x1f7/0x370
[ 62.497223] Code: e8 ce 49 11 00 48 83 c4 08 4c 89 e0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 44 89 f6 48 c70
[ 62.498133] RSP: 0000:ffffa96800043d40 EFLAGS: 00010086
[ 62.498391] RAX: 0000000000000000 RBX: ffff9b87fc458400 RCX: 0000000000000000
[ 62.498741] RDX: 0000000000000001 RSI: 0000000000000096 RDI: ffffffff9693d72c
[ 62.499091] RBP: ffff9b87fd4c8f60 R08: ffffa96800043bfd R09: 0000000000000163
[ 62.499440] R10: ffffa96800043bf8 R11: ffffa96800043bfd R12: ffff9b87fd4c8e00
[ 62.499790] R13: ffff9b87fd4c8ea4 R14: 000000000000000b R15: ffff9b87fd76b000
[ 62.500140] FS: 0000000000000000(0000) GS:ffff9b87fdc00000(0000) knlGS:0000000000000000
[ 62.500534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 62.500816] CR2: 0000000000000000 CR3: 000000003aa0a000 CR4: 00000000000006f0
[ 62.501165] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 62.501515] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 62.501864] Call Trace:
[ 62.501993] pci_free_irq+0x13/0x20
[ 62.502167] nvme_reset_work+0x5d0/0x12a0
[ 62.502369] ? update_load_avg+0x59/0x580
[ 62.502569] ? ttwu_queue_wakelist+0xa8/0xc0
[ 62.502780] ? try_to_wake_up+0x1a2/0x450
[ 62.502979] process_one_work+0x1d2/0x390
[ 62.503179] worker_thread+0x45/0x3b0
[ 62.503361] ? process_one_work+0x390/0x390
[ 62.503568] kthread+0xf9/0x130
[ 62.503726] ? kthread_park+0x80/0x80
[ 62.503911] ret_from_fork+0x22/0x30
[ 62.504090] ---[ end trace de9ed4a70f8d71e2 ]---
[ 123.912275] nvme nvme0: I/O 12 QID 0 timeout, disable controller
[ 123.914670] nvme nvme0: 1/0/0 default/read/poll queues
[ 123.916310] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 123.917469] #PF: supervisor write access in kernel mode
[ 123.917725] #PF: error_code(0x0002) - not-present page
[ 123.917976] PGD 0 P4D 0
[ 123.918109] Oops: 0002 [#1] SMP PTI
[ 123.918283] CPU: 0 PID: 7 Comm: kworker/u4:0 Tainted: G W 5.8.0+ #8
[ 123.918650] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-p4
[ 123.919219] Workqueue: nvme-reset-wq nvme_reset_work
[ 123.919469] RIP: 0010:__blk_mq_alloc_map_and_request+0x21/0x80
[ 123.919757] Code: 66 0f 1f 84 00 00 00 00 00 41 55 41 54 55 48 63 ee 53 48 8b 47 68 89 ee 48 89 fb 8b4
[ 123.920657] RSP: 0000:ffffa96800043d40 EFLAGS: 00010286
[ 123.920912] RAX: ffff9b87fc4fee40 RBX: ffff9b87fc8cb008 RCX: 0000000000000000
[ 123.921258] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9b87fc618000
[ 123.921602] RBP: 0000000000000000 R08: ffff9b87fdc2c4a0 R09: ffff9b87fc616000
[ 123.921949] R10: 0000000000000000 R11: ffff9b87fffd1500 R12: 0000000000000000
[ 123.922295] R13: 0000000000000000 R14: ffff9b87fc8cb200 R15: ffff9b87fc8cb000
[ 123.922641] FS: 0000000000000000(0000) GS:ffff9b87fdc00000(0000) knlGS:0000000000000000
[ 123.923032] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 123.923312] CR2: 0000000000000000 CR3: 000000003aa0a000 CR4: 00000000000006f0
[ 123.923660] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 123.924007] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 123.924353] Call Trace:
[ 123.924479] blk_mq_alloc_tag_set+0x137/0x2a0
[ 123.924694] nvme_reset_work+0xed6/0x12a0
[ 123.924898] process_one_work+0x1d2/0x390
[ 123.925099] worker_thread+0x45/0x3b0
[ 123.925280] ? process_one_work+0x390/0x390
[ 123.925486] kthread+0xf9/0x130
[ 123.925642] ? kthread_park+0x80/0x80
[ 123.925825] ret_from_fork+0x22/0x30
[ 123.926004] Modules linked in:
[ 123.926158] CR2: 0000000000000000
[ 123.926322] ---[ end trace de9ed4a70f8d71e3 ]---
[ 123.926549] RIP: 0010:__blk_mq_alloc_map_and_request+0x21/0x80
[ 123.926832] Code: 66 0f 1f 84 00 00 00 00 00 41 55 41 54 55 48 63 ee 53 48 8b 47 68 89 ee 48 89 fb 8b4
[ 123.927734] RSP: 0000:ffffa96800043d40 EFLAGS: 00010286
[ 123.927989] RAX: ffff9b87fc4fee40 RBX: ffff9b87fc8cb008 RCX: 0000000000000000
[ 123.928336] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9b87fc618000
[ 123.928679] RBP: 0000000000000000 R08: ffff9b87fdc2c4a0 R09: ffff9b87fc616000
[ 123.929025] R10: 0000000000000000 R11: ffff9b87fffd1500 R12: 0000000000000000
[ 123.929370] R13: 0000000000000000 R14: ffff9b87fc8cb200 R15: ffff9b87fc8cb000
[ 123.929715] FS: 0000000000000000(0000) GS:ffff9b87fdc00000(0000) knlGS:0000000000000000
[ 123.930106] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 123.930384] CR2: 0000000000000000 CR3: 000000003aa0a000 CR4: 00000000000006f0
[ 123.930731] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 123.931077] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Co-developed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
The kernel requires a power of two for boundaries because that's the
only way it can efficiently split commands that cross them. A
controller, however, may report a non-power of two boundary.
The driver had been rounding the controller's value to one the kernel
can use, but splitting on the wrong boundary provides no benefit on the
device side, and incurs additional submission overhead from non-optimal
splits.
Don't provide any boundary hint if the controller's value can't be used
and log a warning when first scanning a disk's unreported IO boundary.
Since the chunk sector logic has grown, move it to a separate function.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
If the driver has to unbind from the controller for an early failure
before the subsystem has been set up, there won't be a subsystem holding
the controller's instance, so the controller needs to free its own
instance in this case.
Fixes: 733e4b69d508d ("nvme: Assign subsys instance from first ctrl")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
The way 'spin_lock()' and 'spin_lock_irqsave()' are used is not consistent
in this function.
Use 'spin_lock_irqsave()' also here, as there is no guarantee that
interruptions are disabled at that point, according to surrounding code.
Fixes: a97ec51b37ef ("nvmet_fc: Rework target side abort handling")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
PCIe controllers do not have fabric opts, verify they exist before
showing ctrl_loss_tmo or reconnect_delay attributes.
Fixes: 764075fdcb2f ("nvme: expose reconnect_delay and ctrl_loss_tmo via sysfs")
Reported-by: Tobias Markus <tobias@markus-regensburg.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
If the controller becomes unresponsive in the middle of a reset, we
will hang because we are waiting for the freeze to complete, but that
cannot happen since we have commands that are inflight holding the
q_usage_counter, and we can't blindly fail requests that times out.
So give a timeout and if we cannot wait for queue freeze before
unfreezing, fail and have the error handling take care how to
proceed (either schedule a reconnect of remove the controller).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
When a request times out in a LIVE state, we simply trigger error
recovery and let the error recovery handle the request cancellation,
however when a request times out in a non LIVE state, we make sure to
complete it immediately as it might block controller setup or teardown
and prevent forward progress.
However tearing down the entire set of I/O and admin queues causes
freeze/unfreeze imbalance (q->mq_freeze_depth) because and is really
an overkill to what we actually need, which is to just fence controller
teardown that may be running, stop the queue, and cancel the request if
it is not already completed.
Now that we have the controller teardown_lock, we can safely serialize
request cancellation. This addresses a hang caused by calling extra
queue freeze on controller namespaces, causing unfreeze to not complete
correctly.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
In the timeout handler we may need to complete a request because the
request that timed out may be an I/O that is a part of a serial sequence
of controller teardown or initialization. In order to complete the
request, we need to fence any other context that may compete with us
and complete the request that is timing out.
In this case, we could have a potential double completion in case
a hard-irq or a different competing context triggered error recovery
and is running inflight request cancellation concurrently with the
timeout handler.
Protect using a ctrl teardown_lock to serialize contexts that may
complete a cancelled request due to error recovery or a reset.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
If the controller becomes unresponsive in the middle of a reset, we will
hang because we are waiting for the freeze to complete, but that cannot
happen since we have commands that are inflight holding the
q_usage_counter, and we can't blindly fail requests that times out.
So give a timeout and if we cannot wait for queue freeze before
unfreezing, fail and have the error handling take care how to proceed
(either schedule a reconnect of remove the controller).
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
When a request times out in a LIVE state, we simply trigger error
recovery and let the error recovery handle the request cancellation,
however when a request times out in a non LIVE state, we make sure to
complete it immediately as it might block controller setup or teardown
and prevent forward progress.
However tearing down the entire set of I/O and admin queues causes
freeze/unfreeze imbalance (q->mq_freeze_depth) because and is really
an overkill to what we actually need, which is to just fence controller
teardown that may be running, stop the queue, and cancel the request if
it is not already completed.
Now that we have the controller teardown_lock, we can safely serialize
request cancellation. This addresses a hang caused by calling extra
queue freeze on controller namespaces, causing unfreeze to not complete
correctly.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
In the timeout handler we may need to complete a request because the
request that timed out may be an I/O that is a part of a serial sequence
of controller teardown or initialization. In order to complete the
request, we need to fence any other context that may compete with us
and complete the request that is timing out.
In this case, we could have a potential double completion in case
a hard-irq or a different competing context triggered error recovery
and is running inflight request cancellation concurrently with the
timeout handler.
Protect using a ctrl teardown_lock to serialize contexts that may
complete a cancelled request due to error recovery or a reset.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Users can detect if the wait has completed or not and take appropriate
actions based on this information (e.g. weather to continue
initialization or rather fail and schedule another initialization
attempt).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
NVME_CTRL_NEW should never see any I/O, because in order to start
initialization it has to transition to NVME_CTRL_CONNECTING and from
there it will never return to this state.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
