summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2025-03-11wifi: iwlwifi: bump FW API to 98 for BZ/SC/DR devicesMiri Korenblit
Start supporting API versions 97 and 98 for those devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.55b5455795aa.I333f1e7fa31f9da1d40f668660c1e25b93ff469e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: mvm: Fix bit size calculation in iwl_dbgfs_tas_get_status_readPagadala Yesu Anjaneyulu
Corrected the bit size calculation in the for_each_set_bit macro in the iwl_dbgfs_tas_get_status_read(). The previous implementation used sizeof(dyn_status), which only accounts for the number of bytes. This has been updated to TAS_DYNA_STATUS_MAX to ensure the loop iterates over the correct number of valid bits in dyn_status. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.65d373e4a10e.If2cea63035333b07849e5a2c2a4f5dc5c5239595@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: w/a FW SMPS mode selectionDaniel Gabay
The FW is now responsible of determining the SMPS mode. If the user disabled power save in a certain vif, we send the vif-level power command to clear out the POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK bit for that vif. But erroneously, the FW checks DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK in the device-level command to determine the SMPS mode. To W/A this, send also the device-level command when the power save of a vif changes, and disable power save if there is any vif that has power save disabled. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.7bf205efa027.I2c793ff1fc2a6779a95faaee1ded348100fd97f1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: fix debug actions orderJohannes Berg
The order of actions taken for debug was implemented incorrectly. Now we implemented the dump split and do the FW reset only in the middle of the dump (rather than the FW killing itself on error.) As a result, some of the actions taken when applying the config will now crash the device, so we need to fix the order. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.6de7fa8e63ed.I40632c48e2a67a8aca05def572a934b88ce7934b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: mark Br device not integratedJohannes Berg
This is a discrete device, don't mark it as integrated. This also means we cannot set the LTR delay. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.9bb69393fcc9.I197129383e5441c8139cbb0e810ae0b71198a37c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: Add new TAS disable reason for invalid table sourcePagadala Yesu Anjaneyulu
The new reason is added to the iwl_tas_statically_disabled_reason enum and the corresponding message is updated in the iwl_dbgfs_tas_get_status_read(). Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.5e1272ef3508.I24f668ae716bee20cba15fdc73c3363693bbaf73@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: mvm: cleanup of TAS structure and enumsPagadala Yesu Anjaneyulu
Removed mvm prefix from the following structures and enum names: 1. struct iwl_tas_status_per_mac 2. struct iwl_tas_status_resp 3. enum iwl_tas_dyna_status 4. enum iwl_tas_statically_disabled_reason As these structures and enums are not specific to mvm. Replaced TAS_LMAC_BAND_LB, TAS_LMAC_BAND_HB, and TAS_LMAC_BAND_UHB macros with a generic BAND macro, as these macros are not specific to TAS. Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231427.59144bee9987.Ic2678dcb5afdacc2ca234d4aa4901e7e1f6e8dbb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: fix print for ECKVEmmanuel Grumbach
The print was obviously wrong. We are handling ECKV and not WRDD in this function. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231426.e006c6b21432.I318fed724709f9ee7a0c369e1cf5e1038ddd546a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: fix the ECKV UEFI variable nameEmmanuel Grumbach
This UEFI variable name was badly named. Fix its name and also use the right GUID to find it: we need to use the BT_WIFI (a.k.a. Common) GUID. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231426.78c998d0fa71.I2bc9d72c1dc2c4d7028f0265634a940c2fadbbb5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: iwlwifi: add support for BE213Emmanuel Grumbach
Add the BE213 device. This is just like BE211 but with a limitation on the bandwidth. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308231426.f02f4d7fc73b.Idaf000dd311358e3b50a511f4efc1cc720abd58b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11wifi: mac80211_hwsim: Fix MLD address translationIlan Peer
Do address translations only between shared links. It is possible that while an non-AP MLD station and an AP MLD station have shared links, the frame is intended to be sent on a link which is not shared (for example when sending a probe response). Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250308225541.1aa461270bb6.Ic21592e1b1634653f02b80628cb2152f6e9de367@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-11enic: get max rq & wq entries supported by hw, 16K queuesSatish Kharat
Enables reading the max rq and wq entries supported from the hw. Enables 16k rq and wq entries on hw that supports. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-8-85804263dad8@cisco.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11enic: cleanup of enic wq request completion pathSatish Kharat
Cleans up the enic wq request completion path needed for 16k wq size support. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-7-85804263dad8@cisco.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11enic: added enic_wq.c and enic_wq.hSatish Kharat
Moves wq related function to enic_wq.c. Prepares for a cleaup of enic wq code path. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-6-85804263dad8@cisco.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11enic: remove unused function cq_enet_wq_desc_decSatish Kharat
Removes cq_enet_wq_desc_dec, not needed anymore. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-5-85804263dad8@cisco.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11enic: enable rq extended cq supportSatish Kharat
Enables getting from hw all the supported rq cq sizes and uses the highest supported cq size. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-4-85804263dad8@cisco.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11enic: enic rq extended cq definesSatish Kharat
Adds the defines for 32 and 64 byte receive queue completion queue descriptors. Adds devcmd define to get rq cq descriptor size/s supported by hw. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-3-85804263dad8@cisco.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11enic: enic rq code reorgSatish Kharat
Separates enic rx path from generic vnic api. Removes some complexity of doign enic callbacks through vnic api in rx. This is in preparation for enabling enic extended cq which applies only to enic rx path. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-2-85804263dad8@cisco.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-11enic: Move function from header file to c fileSatish Kharat
Moves cq_enet_rq_desc_dec from cq_enet_desc.h to enic_rq.c. This is in preparation for enic extended completion queue enabling. Co-developed-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Co-developed-by: John Daley <johndale@cisco.com> Signed-off-by: John Daley <johndale@cisco.com> Signed-off-by: Satish Kharat <satishkh@cisco.com> Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-1-85804263dad8@cisco.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-10eth: bnxt: fix memory leak in queue resetTaehee Yoo
When the queue is reset, the bnxt_alloc_one_tpa_info() is called to allocate tpa_info for the new queue. And then the old queue's tpa_info should be removed by the bnxt_free_one_tpa_info(), but it is not called. So memory leak occurs. It adds the bnxt_free_one_tpa_info() in the bnxt_queue_mem_free(). unreferenced object 0xffff888293cc0000 (size 16384): comm "ncdevmem", pid 2076, jiffies 4296604081 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 40 75 78 93 82 88 ff ff ........@ux..... 40 75 78 93 02 00 00 00 00 00 00 00 00 00 00 00 @ux............. backtrace (crc 5d7d4798): ___kmalloc_large_node+0x10d/0x1b0 __kmalloc_large_node_noprof+0x17/0x60 __kmalloc_noprof+0x3f6/0x520 bnxt_alloc_one_tpa_info+0x5f/0x300 [bnxt_en] bnxt_queue_mem_alloc+0x8e8/0x14f0 [bnxt_en] netdev_rx_queue_restart+0x233/0x620 net_devmem_bind_dmabuf_to_queue+0x2a3/0x600 netdev_nl_bind_rx_doit+0xc00/0x10a0 genl_family_rcv_msg_doit+0x1d4/0x2b0 genl_rcv_msg+0x3fb/0x6c0 netlink_rcv_skb+0x12c/0x360 genl_rcv+0x24/0x40 netlink_unicast+0x447/0x710 netlink_sendmsg+0x712/0xbc0 __sys_sendto+0x3fd/0x4d0 __x64_sys_sendto+0xdc/0x1b0 Fixes: 2d694c27d32e ("bnxt_en: implement netdev_queue_mgmt_ops") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250309134219.91670-7-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10eth: bnxt: fix kernel panic in the bnxt_get_queue_stats{rx | tx}Taehee Yoo
When qstats-get operation is executed, callbacks of netdev_stats_ops are called. The bnxt_get_queue_stats{rx | tx} collect per-queue stats from sw_stats in the rings. But {rx | tx | cp}_ring are allocated when the interface is up. So, these rings are not allocated when the interface is down. The qstats-get is allowed even if the interface is down. However, the bnxt_get_queue_stats{rx | tx}() accesses cp_ring and tx_ring without null check. So, it needs to avoid accessing rings if the interface is down. Reproducer: ip link set $interface down ./cli.py --spec netdev.yaml --dump qstats-get OR ip link set $interface down python ./stats.py Splat looks like: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1680fa067 P4D 1680fa067 PUD 16be3b067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 UID: 0 PID: 1495 Comm: python3 Not tainted 6.14.0-rc4+ #32 5cd0f999d5a15c574ac72b3e4b907341 Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bnxt_get_queue_stats_rx+0xf/0x70 [bnxt_en] Code: c6 87 b5 18 00 00 02 eb a2 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 01 RSP: 0018:ffffabef43cdb7e0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffffc04c8710 RCX: 0000000000000000 RDX: ffffabef43cdb858 RSI: 0000000000000000 RDI: ffff8d504e850000 RBP: ffff8d506c9f9c00 R08: 0000000000000004 R09: ffff8d506bcd901c R10: 0000000000000015 R11: ffff8d506bcd9000 R12: 0000000000000000 R13: ffffabef43cdb8c0 R14: ffff8d504e850000 R15: 0000000000000000 FS: 00007f2c5462b080(0000) GS:ffff8d575f600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000167fd0000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x15a/0x460 ? sched_balance_find_src_group+0x58d/0xd10 ? exc_page_fault+0x6e/0x180 ? asm_exc_page_fault+0x22/0x30 ? bnxt_get_queue_stats_rx+0xf/0x70 [bnxt_en cdd546fd48563c280cfd30e9647efa420db07bf1] netdev_nl_stats_by_netdev+0x2b1/0x4e0 ? xas_load+0x9/0xb0 ? xas_find+0x183/0x1d0 ? xa_find+0x8b/0xe0 netdev_nl_qstats_get_dumpit+0xbf/0x1e0 genl_dumpit+0x31/0x90 netlink_dump+0x1a8/0x360 Fixes: af7b3b4adda5 ("eth: bnxt: support per-queue statistics") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Link: https://patch.msgid.link/20250309134219.91670-6-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10eth: bnxt: do not update checksum in bnxt_xdp_build_skb()Taehee Yoo
The bnxt_rx_pkt() updates ip_summed value at the end if checksum offload is enabled. When the XDP-MB program is attached and it returns XDP_PASS, the bnxt_xdp_build_skb() is called to update skb_shared_info. The main purpose of bnxt_xdp_build_skb() is to update skb_shared_info, but it updates ip_summed value too if checksum offload is enabled. This is actually duplicate work. When the bnxt_rx_pkt() updates ip_summed value, it checks if ip_summed is CHECKSUM_NONE or not. It means that ip_summed should be CHECKSUM_NONE at this moment. But ip_summed may already be updated to CHECKSUM_UNNECESSARY in the XDP-MB-PASS path. So the by skb_checksum_none_assert() WARNS about it. This is duplicate work and updating ip_summed in the bnxt_xdp_build_skb() is not needed. Splat looks like: WARNING: CPU: 3 PID: 5782 at ./include/linux/skbuff.h:5155 bnxt_rx_pkt+0x479b/0x7610 [bnxt_en] Modules linked in: bnxt_re bnxt_en rdma_ucm rdma_cm iw_cm ib_cm ib_uverbs veth xt_nat xt_tcpudp xt_conntrack nft_chain_nat xt_MASQUERADE nf_] CPU: 3 UID: 0 PID: 5782 Comm: socat Tainted: G W 6.14.0-rc4+ #27 Tainted: [W]=WARN Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bnxt_rx_pkt+0x479b/0x7610 [bnxt_en] Code: 54 24 0c 4c 89 f1 4c 89 ff c1 ea 1f ff d3 0f 1f 00 49 89 c6 48 85 c0 0f 84 4c e5 ff ff 48 89 c7 e8 ca 3d a0 c8 e9 8f f4 ff ff <0f> 0b f RSP: 0018:ffff88881ba09928 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000c7590303 RCX: 0000000000000000 RDX: 1ffff1104e7d1610 RSI: 0000000000000001 RDI: ffff8881c91300b8 RBP: ffff88881ba09b28 R08: ffff888273e8b0d0 R09: ffff888273e8b070 R10: ffff888273e8b010 R11: ffff888278b0f000 R12: ffff888273e8b080 R13: ffff8881c9130e00 R14: ffff8881505d3800 R15: ffff888273e8b000 FS: 00007f5a2e7be080(0000) GS:ffff88881ba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fff2e708ff8 CR3: 000000013e3b0000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? __warn+0xcd/0x2f0 ? bnxt_rx_pkt+0x479b/0x7610 ? report_bug+0x326/0x3c0 ? handle_bug+0x53/0xa0 ? exc_invalid_op+0x14/0x50 ? asm_exc_invalid_op+0x16/0x20 ? bnxt_rx_pkt+0x479b/0x7610 ? bnxt_rx_pkt+0x3e41/0x7610 ? __pfx_bnxt_rx_pkt+0x10/0x10 ? napi_complete_done+0x2cf/0x7d0 __bnxt_poll_work+0x4e8/0x1220 ? __pfx___bnxt_poll_work+0x10/0x10 ? __pfx_mark_lock.part.0+0x10/0x10 bnxt_poll_p5+0x36a/0xfa0 ? __pfx_bnxt_poll_p5+0x10/0x10 __napi_poll.constprop.0+0xa0/0x440 net_rx_action+0x899/0xd00 ... Following ping.py patch adds xdp-mb-pass case. so ping.py is going to be able to reproduce this issue. Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Link: https://patch.msgid.link/20250309134219.91670-5-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logicTaehee Yoo
When a queue is restarted, it sets MRU to 0 for stopping packet flow. MRU variable is a member of vnic_info[], the first vnic_info is default and the second is ntuple. Only when ntuple is enabled(ethtool -K eth0 ntuple on), vnic_info for ntuple is allocated in init logic. The bp->nr_vnics indicates how many vnic_info are allocated. However bnxt_queue_{start | stop}() accesses vnic_info[BNXT_VNIC_NTUPLE] regardless of ntuple state. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: b9d2956e869c ("bnxt_en: stop packet flow during bnxt_queue_stop/start") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250309134219.91670-4-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10eth: bnxt: return fail if interface is down in bnxt_queue_mem_alloc()Taehee Yoo
The bnxt_queue_mem_alloc() is called to allocate new queue memory when a queue is restarted. It internally accesses rx buffer descriptor corresponding to the index. The rx buffer descriptor is allocated and set when the interface is up and it's freed when the interface is down. So, if queue is restarted if interface is down, kernel panic occurs. Splat looks like: BUG: unable to handle page fault for address: 000000000000b240 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 UID: 0 PID: 1563 Comm: ncdevmem2 Not tainted 6.14.0-rc2+ #9 844ddba6e7c459cafd0bf4db9a3198e Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bnxt_queue_mem_alloc+0x3f/0x4e0 [bnxt_en] Code: 41 54 4d 89 c4 4d 69 c0 c0 05 00 00 55 48 89 f5 53 48 89 fb 4c 8d b5 40 05 00 00 48 83 ec 15 RSP: 0018:ffff9dcc83fef9e8 EFLAGS: 00010202 RAX: ffffffffc0457720 RBX: ffff934ed8d40000 RCX: 0000000000000000 RDX: 000000000000001f RSI: ffff934ea508f800 RDI: ffff934ea508f808 RBP: ffff934ea508f800 R08: 000000000000b240 R09: ffff934e84f4b000 R10: ffff9dcc83fefa30 R11: ffff934e84f4b000 R12: 000000000000001f R13: ffff934ed8d40ac0 R14: ffff934ea508fd40 R15: ffff934e84f4b000 FS: 00007fa73888c740(0000) GS:ffff93559f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000b240 CR3: 0000000145a2e000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x15a/0x460 ? exc_page_fault+0x6e/0x180 ? asm_exc_page_fault+0x22/0x30 ? __pfx_bnxt_queue_mem_alloc+0x10/0x10 [bnxt_en 7f85e76f4d724ba07471d7e39d9e773aea6597b7] ? bnxt_queue_mem_alloc+0x3f/0x4e0 [bnxt_en 7f85e76f4d724ba07471d7e39d9e773aea6597b7] netdev_rx_queue_restart+0xc5/0x240 net_devmem_bind_dmabuf_to_queue+0xf8/0x200 netdev_nl_bind_rx_doit+0x3a7/0x450 genl_family_rcv_msg_doit+0xd9/0x130 genl_rcv_msg+0x184/0x2b0 ? __pfx_netdev_nl_bind_rx_doit+0x10/0x10 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 ... Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Fixes: 2d694c27d32e ("bnxt_en: implement netdev_queue_mgmt_ops") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20250309134219.91670-3-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10eth: bnxt: fix truesize for mb-xdp-pass caseTaehee Yoo
When mb-xdp is set and return is XDP_PASS, packet is converted from xdp_buff to sk_buff with xdp_update_skb_shared_info() in bnxt_xdp_build_skb(). bnxt_xdp_build_skb() passes incorrect truesize argument to xdp_update_skb_shared_info(). The truesize is calculated as BNXT_RX_PAGE_SIZE * sinfo->nr_frags but the skb_shared_info was wiped by napi_build_skb() before. So it stores sinfo->nr_frags before bnxt_xdp_build_skb() and use it instead of getting skb_shared_info from xdp_get_shared_info_from_buff(). Splat looks like: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at net/core/skbuff.c:6072 skb_try_coalesce+0x504/0x590 Modules linked in: xt_nat xt_tcpudp veth af_packet xt_conntrack nft_chain_nat xt_MASQUERADE nf_conntrack_netlink xfrm_user xt_addrtype nft_coms CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.14.0-rc2+ #3 RIP: 0010:skb_try_coalesce+0x504/0x590 Code: 4b fd ff ff 49 8b 34 24 40 80 e6 40 0f 84 3d fd ff ff 49 8b 74 24 48 40 f6 c6 01 0f 84 2e fd ff ff 48 8d 4e ff e9 25 fd ff ff <0f> 0b e99 RSP: 0018:ffffb62c4120caa8 EFLAGS: 00010287 RAX: 0000000000000003 RBX: ffffb62c4120cb14 RCX: 0000000000000ec0 RDX: 0000000000001000 RSI: ffffa06e5d7dc000 RDI: 0000000000000003 RBP: ffffa06e5d7ddec0 R08: ffffa06e6120a800 R09: ffffa06e7a119900 R10: 0000000000002310 R11: ffffa06e5d7dcec0 R12: ffffe4360575f740 R13: ffffe43600000000 R14: 0000000000000002 R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffffa0755f700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f147b76b0f8 CR3: 00000001615d4000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? __warn+0x84/0x130 ? skb_try_coalesce+0x504/0x590 ? report_bug+0x18a/0x1a0 ? handle_bug+0x53/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? skb_try_coalesce+0x504/0x590 inet_frag_reasm_finish+0x11f/0x2e0 ip_defrag+0x37a/0x900 ip_local_deliver+0x51/0x120 ip_sublist_rcv_finish+0x64/0x70 ip_sublist_rcv+0x179/0x210 ip_list_rcv+0xf9/0x130 How to reproduce: <Node A> ip link set $interface1 xdp obj xdp_pass.o ip link set $interface1 mtu 9000 up ip a a 10.0.0.1/24 dev $interface1 <Node B> ip link set $interfac2 mtu 9000 up ip a a 10.0.0.2/24 dev $interface2 ping 10.0.0.1 -s 65000 Following ping.py patch adds xdp-mb-pass case. so ping.py is going to be able to reproduce this issue. Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250309134219.91670-2-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10net: usb: lan78xx: Sanitize return values of register read/write functionsOleksij Rempel
usb_control_msg() returns the number of transferred bytes or a negative error code. The current implementation propagates the transferred byte count, which is unintended. This affects code paths that assume a boolean success/failure check, such as the EEPROM detection logic. Fix this by ensuring lan78xx_read_reg() and lan78xx_write_reg() return only 0 on success and preserve negative error codes. This approach is consistent with existing usage, as the transferred byte count is not explicitly checked elsewhere. Fixes: 8b1b2ca83b20 ("net: usb: lan78xx: Improve error handling in EEPROM and OTP operations") Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/all/ac965de8-f320-430f-80f6-b16f4e1ba06d@sirena.org.uk Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Tested-by: Mark Brown <broonie@kernel.org> Link: https://patch.msgid.link/20250307101223.3025632-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10eth: fbnic: fix memory corruption in fbnic_tlv_attr_get_string()Dan Carpenter
This code is trying to ensure that the last byte of the buffer is a NUL terminator. However, the problem is that attr->value[] is an array of __le32, not char, so it zeroes out 4 bytes way beyond the end of the buffer. Cast the buffer to char to address this. Fixes: e5cf5107c9e4 ("eth: fbnic: Update fbnic_tlv_attr_get_string() to work like nla_strscpy()") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Lee Trager <lee@trager.us> Link: https://patch.msgid.link/2791d4be-ade4-4e50-9b12-33307d8410f6@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10r8169: increase max jumbo packet size on RTL8125/RTL8126Heiner Kallweit
Realtek confirmed that all RTL8125/RTL8126 chip versions support up to 16K jumbo packets. Reflect this in the driver. Tested by Rui on RTL8125B with 12K jumbo packets. Suggested-by: Rui Salvaterra <rsalvaterra@gmail.com> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/396762ad-cc65-4e60-b01e-8847db89e98b@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10virtio_net: Use persistent NAPI configJoe Damato
Use persistent NAPI config so that NAPI IDs are not renumbered as queue counts change. $ sudo ethtool -l ens4 | tail -5 | egrep -i '(current|combined)' Current hardware settings: Combined: 4 $ ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/netdev.yaml \ --dump queue-get --json='{"ifindex": 2}' [{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'}, {'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'rx'}, {'id': 2, 'ifindex': 2, 'napi-id': 8195, 'type': 'rx'}, {'id': 3, 'ifindex': 2, 'napi-id': 8196, 'type': 'rx'}, {'id': 0, 'ifindex': 2, 'type': 'tx'}, {'id': 1, 'ifindex': 2, 'type': 'tx'}, {'id': 2, 'ifindex': 2, 'type': 'tx'}, {'id': 3, 'ifindex': 2, 'type': 'tx'}] Now adjust the queue count, note that the NAPI IDs are not renumbered: $ sudo ethtool -L ens4 combined 1 $ ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/netdev.yaml \ --dump queue-get --json='{"ifindex": 2}' [{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'}, {'id': 0, 'ifindex': 2, 'type': 'tx'}] $ sudo ethtool -L ens4 combined 8 $ ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/netdev.yaml \ --dump queue-get --json='{"ifindex": 2}' [{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'}, {'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'rx'}, {'id': 2, 'ifindex': 2, 'napi-id': 8195, 'type': 'rx'}, {'id': 3, 'ifindex': 2, 'napi-id': 8196, 'type': 'rx'}, {'id': 4, 'ifindex': 2, 'napi-id': 8197, 'type': 'rx'}, {'id': 5, 'ifindex': 2, 'napi-id': 8198, 'type': 'rx'}, {'id': 6, 'ifindex': 2, 'napi-id': 8199, 'type': 'rx'}, {'id': 7, 'ifindex': 2, 'napi-id': 8200, 'type': 'rx'}, [...] Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://patch.msgid.link/20250307011215.266806-5-jdamato@fastly.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10virtio-net: Map NAPIs to queuesJoe Damato
Use netif_queue_set_napi to map NAPIs to queue IDs so that the mapping can be accessed by user apps. Note that the netif_queue_set_napi currently requires RTNL, so care must be taken to ensure RTNL is held on paths where this API might be reached. The paths in the driver where this API can be reached appear to be: - ndo_open, ndo_close, which hold RTNL so no driver change is needed. - rx_pause, rx_resume, tx_pause, tx_resume are reached either via an ethtool ioctl or via XSK - neither path requires a driver change. - power management paths (which call open and close), which have been updated to hold/release RTNL. $ ethtool -i ens4 | grep driver driver: virtio_net $ sudo ethtool -L ens4 combined 4 $ ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/netdev.yaml \ --dump queue-get --json='{"ifindex": 2}' [{'id': 0, 'ifindex': 2, 'napi-id': 8289, 'type': 'rx'}, {'id': 1, 'ifindex': 2, 'napi-id': 8290, 'type': 'rx'}, {'id': 2, 'ifindex': 2, 'napi-id': 8291, 'type': 'rx'}, {'id': 3, 'ifindex': 2, 'napi-id': 8292, 'type': 'rx'}, {'id': 0, 'ifindex': 2, 'type': 'tx'}, {'id': 1, 'ifindex': 2, 'type': 'tx'}, {'id': 2, 'ifindex': 2, 'type': 'tx'}, {'id': 3, 'ifindex': 2, 'type': 'tx'}] Note that virtio_net has TX-only NAPIs which do not have NAPI IDs, so the lack of 'napi-id' in the above output is expected. Signed-off-by: Joe Damato <jdamato@fastly.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://patch.msgid.link/20250307011215.266806-4-jdamato@fastly.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10virtio-net: Refactor napi_disable pathsJoe Damato
Create virtnet_napi_disable helper and refactor virtnet_napi_tx_disable to take a struct send_queue. Signed-off-by: Joe Damato <jdamato@fastly.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://patch.msgid.link/20250307011215.266806-3-jdamato@fastly.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10virtio-net: Refactor napi_enable pathsJoe Damato
Refactor virtnet_napi_enable and virtnet_napi_tx_enable to take a struct receive_queue. Create a helper, virtnet_napi_do_enable, which contains the logic to enable a NAPI. Signed-off-by: Joe Damato <jdamato@fastly.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://patch.msgid.link/20250307011215.266806-2-jdamato@fastly.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10net/mlx5: handle errors in mlx5_chains_create_table()Wentao Liang
In mlx5_chains_create_table(), the return value of mlx5_get_fdb_sub_ns() and mlx5_get_flow_namespace() must be checked to prevent NULL pointer dereferences. If either function fails, the function should log error message with mlx5_core_warn() and return error pointer. Fixes: 39ac237ce009 ("net/mlx5: E-Switch, Refactor chains and priorities") Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250307021820.2646-1-vulab@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-10rust: module: introduce `authors` keyGuilherme Giacomo Simoes
In the `module!` macro, the `author` field is currently of type `String`. Since modules can have multiple authors, this limitation prevents specifying more than one. Add an `authors` field as `Option<Vec<String>>` to allow creating modules with multiple authors, and change the documentation and all current users to use it. Eventually, the single `author` field may be removed. [ The `modinfo` key needs to still be `author`; otherwise, tooling may not work properly, e.g.: $ modinfo --author samples/rust/rust_print.ko Rust for Linux Contributors I have also kept the original `author` field (undocumented), so that we can drop it more easily in a kernel cycle or two. - Miguel ] Suggested-by: Miguel Ojeda <ojeda@kernel.org> Link: https://github.com/Rust-for-Linux/linux/issues/244 Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org> Signed-off-by: Guilherme Giacomo Simoes <trintaeoitogc@gmail.com> Link: https://lore.kernel.org/r/20250309175712.845622-2-trintaeoitogc@gmail.com [ Fixed `modinfo` key. Kept `author` field. Reworded message accordingly. Updated my email. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2025-03-08Add support and infrastructure for RDMA TRANSPORTLeon Romanovsky
--------------------------------------------------------------------- Hi, This is preparation series targeted for mlx5-next, which will be used later in RDMA. This series adds RDMA transport steering logic which would allow the vport group manager to catch control packets from VFs and forward them to control SW to help with congestion control. In addition, RDMA will provide new set of APIs to better control exposed FW capabilities and this series is needed to make sure mlx5 command interface will ensure that privileged commands can always proceed, Thanks Link: https://lore.kernel.org/all/cover.1740574103.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org> * mlx5-next: net/mlx5: fs, add RDMA TRANSPORT steering domain support net/mlx5: Query ADV_RDMA capabilities net/mlx5: Limit non-privileged commands net/mlx5: Allow the throttle mechanism to be more dynamic net/mlx5: Add RDMA_CTRL HW capabilities
2025-03-08net/mlx5: fs, add RDMA TRANSPORT steering domain supportPatrisious Haddad
Add RX and TX RDMA_TRANSPORT flow table namespace, and the ability to create flow tables in those namespaces. The RDMA_TRANSPORT RX and TX are per vport. Packets will traverse through RDMA_TRANSPORT_RX after RDMA_RX and through RDMA_TRANSPORT_TX before RDMA_TX, ensuring proper control and management. RDMA_TRANSPORT domains are managed by the vport group manager. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/a6b550d9859a197eafa804b9a8d76916ca481da9.1740574103.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-08net/mlx5: Query ADV_RDMA capabilitiesPatrisious Haddad
Query ADV_RDMA capabilities which provide information for advanced RDMA related features. Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/e3e6ede03ea31cd201078dcdd4e407608e4a5a87.1740574103.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-08net/mlx5: Limit non-privileged commandsChiara Meiohas
Limit non-privileged UID commands to half of the available command slots when privileged UIDs are present. Privileged throttle commands will not be limited. Use an xarray to store privileged UIDs. Add insert and remove functions for privileged UIDs management. Non-user commands (with uid 0) are not limited. Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/d2f3dd9a0dbad3c9f2b4bb0723837995e4e06de2.1740574103.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-08net/mlx5: Allow the throttle mechanism to be more dynamicChiara Meiohas
Previously, throttle commands were identified and limited based on opcode. These commands were limited to half the command slots using a semaphore, and callback commands checked the opcode to determine semaphore release. To allow exceptions, we introduce a variable to indicate when the throttle lock is held. This allows scenarios where throttle commands are not limited. Callback functions use this variable to determine if the throttle semaphore needs to be released. This patch contains no functional changes. It's a preparation for the next patch. Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Link: https://patch.msgid.link/055d975edeb816ac4c0fd1e665c6157d11947d26.1740574103.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-03-08net: move misc netdev_lock flavors to a separate headerJakub Kicinski
Move the more esoteric helpers for netdev instance lock to a dedicated header. This avoids growing netdevice.h to infinity and makes rebuilding the kernel much faster (after touching the header with the helpers). The main netdev_lock() / netdev_unlock() functions are used in static inlines in netdevice.h and will probably be used most commonly, so keep them in netdevice.h. Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250307183006.2312761-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-08hamradio: use netdev_lockdep_set_classes() helperEric Dumazet
It is time to use netdev_lockdep_set_classes() in bpqether.c List of related commits: 0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers") c74e1039912e ("net: bridge: use netdev_lockdep_set_classes()") 9a3c93af5491 ("vlan: use netdev_lockdep_set_classes()") 0d7dd798fd89 ("net: ipvlan: call netdev_lockdep_set_classes()") 24ffd752007f ("net: macvlan: call netdev_lockdep_set_classes()") 78e7a2ae8727 ("net: vrf: call netdev_lockdep_set_classes()") d3fff6c443fe ("net: add netdev_lockdep_set_classes() helper") syzbot reported: WARNING: possible recursive locking detected 6.14.0-rc5-syzkaller-01064-g2525e16a2bae #0 Not tainted dhcpcd/5501 is trying to acquire lock: ffff8880797e2d28 (&dev->lock){+.+.}-{4:4}, at: netdev_lock include/linux/netdevice.h:2765 [inline] ffff8880797e2d28 (&dev->lock){+.+.}-{4:4}, at: register_netdevice+0x12d8/0x1b70 net/core/dev.c:11008 but task is already holding lock: ffff88802e530d28 (&dev->lock){+.+.}-{4:4}, at: netdev_lock include/linux/netdevice.h:2765 [inline] ffff88802e530d28 (&dev->lock){+.+.}-{4:4}, at: netdev_lock_ops include/linux/netdevice.h:2804 [inline] ffff88802e530d28 (&dev->lock){+.+.}-{4:4}, at: dev_change_flags+0x120/0x270 net/core/dev_api.c:65 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&dev->lock); lock(&dev->lock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by dhcpcd/5501: #0: ffffffff8fed6848 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_net_lock include/linux/rtnetlink.h:130 [inline] #0: ffffffff8fed6848 (rtnl_mutex){+.+.}-{4:4}, at: devinet_ioctl+0x34c/0x1d80 net/ipv4/devinet.c:1121 #1: ffff88802e530d28 (&dev->lock){+.+.}-{4:4}, at: netdev_lock include/linux/netdevice.h:2765 [inline] #1: ffff88802e530d28 (&dev->lock){+.+.}-{4:4}, at: netdev_lock_ops include/linux/netdevice.h:2804 [inline] #1: ffff88802e530d28 (&dev->lock){+.+.}-{4:4}, at: dev_change_flags+0x120/0x270 net/core/dev_api.c:65 stack backtrace: CPU: 1 UID: 0 PID: 5501 Comm: dhcpcd Not tainted 6.14.0-rc5-syzkaller-01064-g2525e16a2bae #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_deadlock_bug+0x483/0x620 kernel/locking/lockdep.c:3039 check_deadlock kernel/locking/lockdep.c:3091 [inline] validate_chain+0x15e2/0x5920 kernel/locking/lockdep.c:3893 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5228 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5851 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19c/0x1010 kernel/locking/mutex.c:730 netdev_lock include/linux/netdevice.h:2765 [inline] register_netdevice+0x12d8/0x1b70 net/core/dev.c:11008 bpq_new_device drivers/net/hamradio/bpqether.c:499 [inline] bpq_device_event+0x4b1/0x8d0 drivers/net/hamradio/bpqether.c:542 notifier_call_chain+0x1a5/0x3f0 kernel/notifier.c:85 __dev_notify_flags+0x207/0x400 netif_change_flags+0xf0/0x1a0 net/core/dev.c:9442 dev_change_flags+0x146/0x270 net/core/dev_api.c:66 devinet_ioctl+0xea2/0x1d80 net/ipv4/devinet.c:1200 inet_ioctl+0x3d7/0x4f0 net/ipv4/af_inet.c:1001 sock_do_ioctl+0x158/0x460 net/socket.c:1190 sock_ioctl+0x626/0x8e0 net/socket.c:1309 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 7e4d784f5810 ("net: hold netdev instance lock during rtnetlink operations") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250307160358.3153859-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: phy: nxp-c45-tja11xx: add TJA112XB SGMII PCS restart errataAndrei Botila
TJA1120B/TJA1121B can achieve a stable operation of SGMII after a startup event by putting the SGMII PCS into power down mode and restart afterwards. It is necessary to put the SGMII PCS into power down mode and back up. Cc: stable@vger.kernel.org Fixes: f1fe5dff2b8a ("net: phy: nxp-c45-tja11xx: add TJA1120 support") Signed-off-by: Andrei Botila <andrei.botila@oss.nxp.com> Link: https://patch.msgid.link/20250304160619.181046-3-andrei.botila@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: phy: nxp-c45-tja11xx: add TJA112X PHY configuration errataAndrei Botila
The most recent sillicon versions of TJA1120 and TJA1121 can achieve full silicon performance by putting the PHY in managed mode. It is necessary to apply these PHY writes before link gets established. Application of this fix is required after restart of device and wakeup from sleep. Cc: stable@vger.kernel.org Fixes: f1fe5dff2b8a ("net: phy: nxp-c45-tja11xx: add TJA1120 support") Signed-off-by: Andrei Botila <andrei.botila@oss.nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250304160619.181046-2-andrei.botila@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: phy: tja11xx: enable PHY in sleep mode for TJA1102SDimitri Fedrau
Due to pin strapping the PHY maybe disabled per default. TJA1102 devices can be enabled by setting the PHY_EN bit. Support is provided for TJA1102S devices but can be easily added for TJA1102 too. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com> Link: https://patch.msgid.link/20250304-tja1102s-support-v2-2-cd3e61ab920f@liebherr.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: phy: tja11xx: add support for TJA1102SDimitri Fedrau
NXPs TJA1102S is a single PHY version of the TJA1102 in which one of the PHYs is disabled. Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250304-tja1102s-support-v2-1-cd3e61ab920f@liebherr.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: mctp i2c: Copy headers if clonedMatt Johnston
Use skb_cow_head() prior to modifying the TX SKB. This is necessary when the SKB has been cloned, to avoid modifying other shared clones. Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Fixes: f5b8abf9fc3d ("mctp i2c: MCTP I2C binding driver") Link: https://patch.msgid.link/20250306-matt-mctp-i2c-cow-v1-1-293827212681@codeconstruct.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: ethernet: Remove accidental duplication in Kconfig fileLukas Bulwahn
Commit fb3dda82fd38 ("net: airoha: Move airoha_eth driver in a dedicated folder") accidentally added the line: source "drivers/net/ethernet/mellanox/Kconfig" in drivers/net/ethernet/Kconfig, so that this line is duplicated in that file. Remove this accidental duplication. Fixes: fb3dda82fd38 ("net: airoha: Move airoha_eth driver in a dedicated folder") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250306094753.63806-1-lukas.bulwahn@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: mctp i3c: Copy headers if clonedMatt Johnston
Use skb_cow_head() prior to modifying the tx skb. This is necessary when the skb has been cloned, to avoid modifying other shared clones. Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Fixes: c8755b29b58e ("mctp i3c: MCTP I3C driver") Link: https://patch.msgid.link/20250306-matt-i3c-cow-head-v1-1-d5e6a5495227@codeconstruct.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07net: airoha: Fix dev->dsa_ptr check in airoha_get_dsa_tag()Lorenzo Bianconi
Fix the following warning reported by Smatch static checker in airoha_get_dsa_tag routine: drivers/net/ethernet/airoha/airoha_eth.c:1722 airoha_get_dsa_tag() warn: 'dp' isn't an ERR_PTR dev->dsa_ptr can't be set to an error pointer, it can just be NULL. Remove this check since it is already performed in netdev_uses_dsa(). Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/netdev/Z8l3E0lGOcrel07C@lore-desk/T/#m54adc113fcdd8c5e6c5f65ffd60d8e8b1d483d90 Fixes: af3cf757d5c9 ("net: airoha: Move DSA tag in DMA descriptor") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250306-airoha-flowtable-fixes-v1-1-68d3c1296cdd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07eth: fbnic: support ring size configurationJakub Kicinski
Support ethtool -g / -G. Leverage the code added for -l / -L to alloc / stop / start / free. Check parameters against HW min/max but also our own min/max. Min HW queue is 16 entries, we can't deal with TWQs that small because of the queue waking logic. Add similar contraint on RCQ for symmetry. We need 3 sizes on Rx, as the NIC does header-data split two separate buffer pools: (1) head page ring - how many empty pages we post for headers (2) payload page ring - how many empty pages we post for payloads (3) completion ring - where NIC produces the Rx descriptors Acked-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250306145150.1757263-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>