| Age | Commit message (Collapse) | Author |
|
This is the entry point for the new module rtw88_8814au.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/71457787-5a9e-4ead-a62c-22ca44e00b89@gmail.com
|
|
This is the entry point for the new module rtw88_8814ae.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/74ebab2f-a23e-4d87-935f-0af2b5cba672@gmail.com
|
|
These contain all the logic for the RTL8814A chip.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/5d3b8c03-63c1-4f20-860a-89d424badad8@gmail.com
|
|
This contains various tables for initialising the RTL8814A, plus TX
power limits.
Also add rtw8814a_table.h.
Split into two patches because they are big.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/4c48e35e-1b04-42ed-940e-0e931693def6@gmail.com
|
|
This contains various tables for initialising the RTL8814A, plus TX
power limits.
Split into two patches because they are big.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/df0b8ceb-2c2f-4bda-906f-a05c7b4d424c@gmail.com
|
|
Add various register definitions which will be used by the new driver.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/1dcb5abb-26f8-4db5-be36-057de56465e5@gmail.com
|
|
RTL8852BE-VT support for firmware 29.122. Add parser for Bluetooth channel
map report version 7.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250308025832.10400-5-pkshih@realtek.com
|
|
In order to rearrange the structure member, the format update to version 7.
And to parse the report correctly, add the related logic.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250308025832.10400-4-pkshih@realtek.com
|
|
This report will feedback some basic information from firmware(PTA counter,
report counter, mailbox counter etc). And the report version need to match
driver & firmware both side. The original logic break the switch case logic
before driver update the report version. It made the report can not be
parsed correctly. Delete the break at the version 7 and 8.
Add logic to count C2H event report.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250308025832.10400-3-pkshih@realtek.com
|
|
Add format version of Wi-Fi firmware commands/events for firmware
version 0.29.122.0.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250308025832.10400-2-pkshih@realtek.com
|
|
Some of 11ax AP set the UL HE-SIG-A2 reserved subfield to all 0s, which
will cause the 11be chip to recognize trigger frame as EHT. We propose
a method to bypass the "UL HE-SIG-A2 reserved subfield" and always uses
HE TB in response to the AP's trigger frame.
Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250306021144.12854-6-pkshih@realtek.com
|
|
The 8922A now supports dynamic antenna gain. However, in firmware
before v0.35.64.0, different transmit powers cannot be applied to
each RF path. To comply with regulatory limits in these older
firmware, the lower of the two requested transmit powers will
be used for both paths when they differ.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250306021144.12854-5-pkshih@realtek.com
|
|
The dynamic antenna gain (DAG) considers the country, meaning DAG can
be activated only when countries and regulatory domains allow it.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250306021144.12854-4-pkshih@realtek.com
|
|
TAS state switching mechanism now incorporates the TX ratio as a
decision parameter. The average power calculation has been improved
by using a higher resolution conversion from dBm to linear. During
scan or MCC operations, TAS state is forced to static SAR and
suspend the average power calculation. Additionally, TAS window
size depends on the regulatory domain and band to ensure compliance.
TAS is enabled when permitted by the regulatory domain and is
currently supported on the 8852CE.
For debugging, add a flag to disable_dm that can stop TAS mechanism.
Co-developed-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250306021144.12854-3-pkshih@realtek.com
|
|
Enhanced the dBm to linear conversion function to accommodate negative
dBm values and improved the precision from 1 dBm to 0.25 dBm.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250306021144.12854-2-pkshih@realtek.com
|
|
Don't error out on large MTU if XDP is multi-buf.
The ping test now tests ping with XDP and high MTU.
netdevsim doesn't actually run the prog (yet?) so
it doesn't matter if the prog was multi-buf..
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20250311092820.542148-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All drivers that use queue API are already converted to use
netdev instance lock. Move netdev instance lock management to
the netlink layer and drop rtnl_lock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry. <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Although it does not seem to have any untoward side-effects,
the use of ';' to separate to assignments seems more appropriate than ','.
Flagged by clang-19 -Wcomma
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250307-mlx5-comma-v1-1-934deb6927bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnxt_dl_reload_up is completely missing instance lock management
which can result in `devlink dev reload` leaving with instance
lock held. Add the missing calls.
Also add netdev_assert_locked to make it clear that the up() method
is running with the instance lock grabbed.
v2:
- add net/netdev_lock.h include to bnxt_devlink.c for netdev_assert_locked
Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250309215851.2003708-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdev_lock_ops conditionally grabs instance lock when queue_mgmt_ops
is defined. However queue_mgmt_ops support is signaled via FW
so we can sometimes boot without queue_mgmt_ops being set.
This will result in bnxt running without instance lock which
the driver now heavily depends on. Set request_ops_lock to true
unconditionally to always request netdev instance lock.
Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250309215851.2003708-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All (error) paths that call dev_close are already holding instance lock,
so switch to netif_close to avoid the deadlock.
v2:
- add missing EXPORT_MODULE for netif_close
Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250309215851.2003708-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes berg says:
====================
Few more fixes:
- cfg80211/mac80211
- stop possible runaway wiphy worker
- EHT should not use reserved MPDU size bits
- don't run worker for stopped interfaces
- fix SA Query processing with MLO
- fix lookup of assoc link BSS entries
- correct station flush on unauthorize
- iwlwifi:
- TSO fixes
- fix non-MSI-X platforms
- stop possible runaway restart worker
- rejigger maintainers so I'm not CC'ed on
everything
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pointers declared with the __free(kfree) attribute need to be initialized
because they will be passed to kfree() on every return path. There are
two return statement before the "cmd" pointer is initialized so this
leads to an uninitialized variable bug.
Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/f7c17a7f-f173-43bf-bc39-316b8adde349@stanley.mountain
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When a character array without a terminating NUL character has a static
initializer, GCC 15's -Wunterminated-string-initialization will only
warn if the array lacks the "nonstring" attribute[1]. Mark the arrays
with __nonstring to and correctly identify the char array as "not a C
string" and thereby eliminate the warning.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117178 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250311225604.it.926-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When a character array without a terminating NUL character has a static
initializer, GCC 15's -Wunterminated-string-initialization will only
warn if the array lacks the "nonstring" attribute[1]. Mark the arrays
with __nonstring to and correctly identify the char array as "not a C
string" and thereby eliminate the warning.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117178 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250311225513.it.620-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When a character array without a terminating NUL character has a static
initializer, GCC 15's -Wunterminated-string-initialization will only
warn if the array lacks the "nonstring" attribute[1]. Mark the arrays
with __nonstring to and correctly identify the char array as "not a C
string" and thereby eliminate the warning.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117178 [1]
Cc: Brian Norris <briannorris@chromium.org>
Cc: Francesco Dolcini <francesco@dolcini.it>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Allison Randal <allison@lohutok.net>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250310222332.work.202-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, we don't select a link that wasn't heared in the last 5
seconds.
But if the link started to suffer from missed beacons more recent than
that, we might select this link even we really shouldn't,
leading to a disconnection instead of a link switch.
Fix this by checking if a link was heared in the last MLO scan,
if not - don't include it in the link selection.
Since we do an MLO scan on missed beacons, we will not hear that link in
that scan, and won't select it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250309073442.8f950497219e.I51306021fe9231a8184e89c23707be47d3c05241@changeid
[replace cast with ULL constant]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the RSSI is dropping to below the threshold, we need to do a MLO
scan to try select a better link.
This is true also if the connection doesn't have EMLSR capability,
and also if we are in EMLSR.
Fix the logic to always check the RSSI (and do a MLO scan if needed).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250309073442.a31b95888244.If6dca30d657658fa902b19e07b6fbc86c48d69cb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
According to the requirements, if the last scan isn't older than 20
seconds, we can use its results and do the link selection without
scanning before.
But this applies only when trying to get back to EMLSR, not if the link
has bad RSSI/missed beacons.
Since an MLO scan is cheap anyway, and results from 20 seconds before
are really old, always scan before links switching.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250309073442.a4c96e5c49d4.Ie55697af49435c2c45dccf7c607de5857b370f7a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Refactor the setting of the A-MSDU maximal lengths as follows:
- Move the setting of the maximal A-MSDU length in case of HT from TLC
logic to the station logic as it is not related to TLC.
- As long as the station is not associated, set RC A-MSDU maximal
lengths to 1, to prevent iwlmld and mac80211 from building A-MSDUs.
- Update the RC and the TID specific A-MSDU maximal lengths based on
the FW TLC notifications.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250309073442.afc842633002.I68153b6b0c5d976f2c7525009631f8fa28e9987c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
On station interfaces we don't only have the AP STA, but also
TDLS stations. Don't try to remove AP keys for them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Tested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250309073442.f06a4d6eed2b.Icd20af668a22bfae5328eb0ea00ce10a72ce3539@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Move the FTM initiator data to the relevant header file and document
its fields.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250309073442.92830fd553ec.Icbbd0eba34c9ba318801074f7705f6d1e5af5482@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Due to the iwl_mld_get_chandef_from_chanctx() logic, even after
the OMI handshake to reduce bandwidth the driver wouldn't apply
that to the PHY context, since it always uses the normal, not
the reduced, configuration on 6 GHz (not strictly always, but
OMI will only apply if the original bandwidth is > 80 MHz.) Fix
this by making that selection contingent on AP mode. Refactor
the code a bit to also make it clearer why the min_def isn't
used in that case (for FILS.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250309073442.2706cbd0b100.Ic34636b1aee81a140eb690fca8139909a58f8e8b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We're allowed to enter OMI only 5 seconds after the last
exit, so the logic needs to be inverted. Fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250309073442.58efb4c91655.Id596fcda2fb28f5945548d780be9ff90aee76b7e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We used ieee80211_iterate_active_interfaces instead of
ieee80211_iterate_active_interfaces_mtx, which is the one to use when
the wiphy lock is held.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250309073442.925cdca61ed0.I34f5c52d27414cb4c301bbd24df7c3530a43fa1d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since iwlmld claims wiphys to be self-managed, it needs to
have a regdomain registered before the wiphy is registered
to avoid issues when trying to get the regdomain, e.g. via
"iw phy phy0 reg get".
Move the initialization early, on every FW start not just
when starting to really operate it. This also requires the
self-managed flag to be set early.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250309073442.10ab8fed94e9.I7c8dee3d14c7427a56882739f82546c6492f3b10@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The code was calling ieee80211_iterate_interfaces, however that
takes a lock of iflist_mtx, which must not be taken recursively. Fix
this by using the appropriate _mtx version that asserts that the wiphy
mutex is already held.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250309073442.6ce298d6a44f.Ibc862dfdd6cb2da63781c791b9dc601bd5ce4bdc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
- Change reasons enum to a bitmask and rename it
- Don't use 'else if' so all reasons will be set in the reasons bitmask
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250309073442.0a3b2f88fbbf.I0152bc39e828488451e85135feb044ce1f7a85d3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For each channel context, track the avarage channel load by others in the
driver specific phy data, to be used by EMLSR.
Due to FW limitations, this value is incorrect in EMLSR, so it is
shouldn't be used in EMLSR.
On EMLSR exit, clear it so the wrong value won't be used.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250309073442.dd443fc5b178.I68b2fed197aae14888159b7a73bf40c2f346f41f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the user disables power save of a vif that didn't have it enabled
(for example before association), mac80211 will not notify the driver
with BSS_CHANGED_PS. This will cause the driver to not update the
device-level power save to disabled.
Fix this by checking the vif's power save status upon authorization, and
stop considering the vif's power save status on disassociation.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250309073442.1cdeb78b19ba.I58fe02c062524029071b04b093a1b09c5e46f4ef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
fw_status.in_d3 is only defined under CONFIG_PM_SLEEP.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250309073442.6f7e44a27b87.I78b9311019b59477a1961cddc4640b255ceda651@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When running secured ranging and the initiator is associated with
the responder, the TK was not set in the range request command.
Fix it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308231427.603dc31579d9.Icd19d797e56483c08dd22c55b96fee481c4d2f3d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add qlcnic_sriov_free_vlans() in qlcnic_sriov_alloc_vlans() if
any sriov_vlans fails to be allocated.
Add qlcnic_sriov_free_vlans() to free the memory allocated by
qlcnic_sriov_alloc_vlans() if "sriov->allowed_vlans" fails to
be allocated.
Fixes: 91b7282b613d ("qlcnic: Support VLAN id config.")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://patch.msgid.link/20250307094952.14874-1-haoxiang_li2024@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since rtase_init_ring, which is called within rtase_sw_reset, adds ring
entries already present in the ring list back into the list, it causes
the ring list to form a cycle. This results in list_for_each_entry_safe
failing to find an endpoint during traversal, leading to an error.
Therefore, it is necessary to remove the previously added ring_list nodes
before calling rtase_init_ring.
Fixes: 079600489960 ("rtase: Implement net_device_ops")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306070510.18129-1-justinlai0215@realtek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When validation on the backup slave is enabled, we need to validate the
Neighbor Solicitation (NS) messages received on the backup slave. To
receive these messages, the correct destination MAC address must be added
to the slave. However, the target in bonding is a unicast address, which
we cannot use directly. Instead, we should first convert it to a
Solicited-Node Multicast Address and then derive the corresponding MAC
address.
Fix the incorrect MAC address setting on both slave_set_ns_maddr() and
slave_set_ns_maddrs(). Since the two function names are similar. Add
some description for the functions. Also only use one mac_addr variable
in slave_set_ns_maddr() to save some code and logic.
Fixes: 8eb36164d1a6 ("bonding: add ns target multicast address to slave device")
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306023923.38777-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add native XDP support. We do not support zero copy yet.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20250305101422.1908370-4-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We have different cases for SWDATA (skb, page, cmd, etc)
so it is better to have a dedicated data structure for that.
We can embed the type field inside the struct and use it
to interpret the data in completion handlers.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20250305101422.1908370-3-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This is to prepare for native XDP support.
The page pool API is more faster in allocating pages than
__alloc_skb(). Drawback is that it works at PAGE_SIZE granularity
so we are not efficient in memory usage.
i.e. we are using PAGE_SIZE (4KB) memory for 1.5KB max packet size.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20250305101422.1908370-2-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
iwl_trans_reclaim is warning if it is called when the FW is not alive.
But if it is called when there is a pending restart, i.e. after a FW
error, there is no need to warn, instead - return silently.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308231427.ba3d90b22c25.I9332506af1997faefcf0bdb51d98d5e874051722@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Stop supporting older FWs.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308231427.73e962ca3e6c.I942fa8cafc1791b9330ad18e2599fae11d7b3336@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|