| Age | Commit message (Collapse) | Author |
|
For chips that supports TKIP HW encryption and decryption, enable TKIP
cipher for WoWLAN feature. Additionally, the TX MIC KEY and RX MIC KEY is
opposite in FW. Therefore, reverse the MIC KEY direction in H2C format,
and also reverse it from AOAC report before reporting to mac80211.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250915065434.39324-1-pkshih@realtek.com
|
|
Add TAS support for 8922AE. Unlike AX ICs, BE ICs introduce a TAS
timer switch. The firmware starts a TAS timer to periodically
collect TX power information and notify the driver via C2H
events. To avoid unnecessary C2H events, the TAS timer is
enabled during core_start().
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250915065429.39269-1-pkshih@realtek.com
|
|
Some H2C commands need to wait for target C2H events to confirm they
are executed well. The characteristics of a target C2H event will be
encoded into a value, called condition. Then, the corresponding H2C
command will wait for it. And, C2H events will complete a condition
according to their own characteristics. So, when conditions of both
side match, the corresponding H2C command will be completed.
Originally, condition waiting window is opened after the H2C command
is sent. However, for CPU-bound systems, target C2H event might be
already done before the H2C command opens condition waiting window.
Without that, C2H event won't match condition, and it will complete
nothing. Finally, H2C command wait will time out.
Hence, now open condition waiting window first for H2C commands which
need to wait for target C2H events. The waiting function is split to
two parts, prepare and evaluate. And, waiting side becomes the below
where prepare part and evaluate part must be a pair.
waiting prepare: condition
(open condition waiting window)
Do the needed things to trigger completing side.
Record errors that will cause no real completer.
waiting evaluate: prepare, errors
(start waiting for completion if things are fine;
otherwise, clean up and return final result.)
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250915065352.39082-1-pkshih@realtek.com
|
|
Logically before a waiting side which has already timed out turns the
atomic status back to idle, a completing side could still pass atomic
condition and call complete. It will make the following H2C commands,
waiting C2H events, get a completion unexpectedly early. Hence, renew
a completion for each H2C command waiting a C2H event.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250915065343.39023-1-pkshih@realtek.com
|
|
Enable beacon tracking support on 8852B to improve connection stability.
8852B firmware has supported the power level H2C since version 0.29.128.
This H2C is one of the required elements for beacon tracking, allowing
control of the maximum receive window while in power save mode.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250915065337.38966-1-pkshih@realtek.com
|
|
SER (system error recovery) can deal with different crash types by
different levels of processes. Now, add a debug function to trigger
MAC error in purpose for SER L0 simulation/verification. And, extend
dbgfs fw_crash to accept different parameters.
# simulate MAC error (one kind of SER L0)
echo 3 > fw_crash
Normally, FW won't report SER L0 cases to driver. Instead, they will
be handled by FW directly. If unfortunately FW handling fails, SER
will rise to L1 and be reported to driver.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250915065329.38911-1-pkshih@realtek.com
|
|
A power-on sequence table is introduced to initialize AFE (Analogue Front
End) connecting to RF components. Build the sequence in firmware file,
and use a parser to execute the sequences including write/poll/delay
actions.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250915065314.38846-1-pkshih@realtek.com
|
|
The header v2 of ppdu status is optional, If it is not enabled, the RX
path must be obtained from IE00 or IE01. Append the IE00 part.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250915065213.38659-5-pkshih@realtek.com
|
|
The IE length of RTW89_PHYSTS_IE09_FTR_0 is dynamic, need to calculate
more to get it. This IE is not necessary now, disable it to avoid get
wrong IE length to let the parse function check failed.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250915065213.38659-4-pkshih@realtek.com
|
|
It makes more sense to use ieee80211_tx_info::driver_data instead of
ieee80211_tx_info::status.status_driver_data which is used to share
TX status reporting to mac80211, because actually driver calls
ieee80211_tx_info_clear_status() to clear the content including
status_driver_data in rtw89_pci_tx_status() before filling the status.
Review and point out the scope (by comments) driver can safely use
ieee80211_tx_info::driver_data between rtw89_hci_tx_write() and
calling ieee80211_tx_info_clear_status().
Add BUILD_BUG_ON() to assert that driver struct size is smaller than
the size defined by mac80211.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250915065213.38659-3-pkshih@realtek.com
|
|
Originally, to directly align with the chanctx design, getter of managed
chanctx returned a default channel when a link doesn't own a chanctx yet.
Then, callers could simply use the return without trivial NULL checking.
But in MLD HW settings of next chip, there will be a special case that a
caller needs to check if a link has owned chanctx or not to determine
CCK hardware circuit working on HW-x. So, add a func *_or_null for this
first.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250915065213.38659-2-pkshih@realtek.com
|
|
Avoid spurious channel changes and clean up allocated links
Link: https://patch.msgid.link/20250915075910.47558-15-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
- fix number of station accounting for scanning code.
- reset channel context
Link: https://patch.msgid.link/20250915075910.47558-14-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Set UP in skb->priority to allow DSCP Learning at upper layers
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Link: https://patch.msgid.link/20250915075910.47558-13-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Enable VTA flag in txwi to enable HQD in SPL which is needed by
the PST. Without this patch, PST cannot get the correct delay of
TxD and lead to a large latency.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Link: https://patch.msgid.link/20250915075910.47558-12-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
It is not used by the firmware.
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Link: https://patch.msgid.link/20250915075910.47558-11-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Set MT_WF_RFCR_DROP_OTHER_UC by default and disable this flag in
mt7996_set_monitor only if monitor mode is enabled.
Without this patch, the MT_WF_RFCR_DROP_OTHER_UC would not be set so the
driver would receive lots of packets meant for other devices.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Link: https://patch.msgid.link/20250915075910.47558-10-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This ensures that packets are sent out immediately and are not held by
firmware internal buffering.
Link: https://patch.msgid.link/20250915075910.47558-9-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Disable and re-enable beacon after beacon protection key change, in order
to fully apply the changes.
Link: https://patch.msgid.link/20250915075910.47558-8-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Ensure that a key for a link is only added and removed once.
When bringing up a link, only upload keys for that particular link, instead
of iterating over all of them.
Link: https://patch.msgid.link/20250915075910.47558-7-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
While deleting sta keys can be omitted in order to fix race conditions,
vif keys must be deleted before being replaced in order to prevent
accidental reuse in firmware.
Link: https://patch.msgid.link/20250915075910.47558-6-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Free the allocated skb on error
Link: https://patch.msgid.link/20250915075910.47558-5-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Include beacon key information in the STA_REC_UPDATE call.
Remove mt7996_mcu_get_pn - when installing a new key, we should
not reuse any existing PN value.
Signed-off-by: Allen Ye <allen.ye@mediatek.com>
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://patch.msgid.link/20250915075910.47558-4-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This allows faster recovery from firmware issues.
Based on patch by Chad Monroe and ported from mt7915.
Link: https://patch.msgid.link/20250915075910.47558-3-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Port latest version of similar changes from mt7915:
- use reconfig_complete to restart mac_work / queues
- clear wcid and vif mask to avoid leak
- fix sta poll list corruption
- reset station links
- reset interface links
- clear rro list
Link: https://patch.msgid.link/20250915075910.47558-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
There is only one wiphy, so extra calls must be removed.
For calls that need to remain per-wiphy, use mt7996_for_each_phy
Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Link: https://patch.msgid.link/20250915075910.47558-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
In my previous fix for this condition, I erroneously listed 9000
instead of 7000 family, when 7000/8000 were already using iwlmvm.
Thus the condition ended up wrong, causing the issue I had fixed
for older devices to suddenly appear on 7000/8000 family devices.
Correct the condition accordingly.
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/r/20250909165811.10729-1-00107082@163.com/
Fixes: 586e3cb33ba6 ("wifi: iwlwifi: fix byte count table for old devices")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250915102743.777aaafbcc6c.I84404edfdfbf400501f6fb06def5b86c501da198@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
Add VID/PID 0846/9065 for Netgear A7500.
Reported-by: Autumn Dececco <autumndececco@gmail.com>
Tested-by: Autumn Dececco <autumndececco@gmail.com>
Signed-off-by: Nick Morrow <morrownr@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/80bacfd6-6073-4ce5-be32-ae9580832337@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt76_eeprom_override has of_get_mac_address, which can return
-EPROBE_DEFER if the nvmem driver gets loaded after mt76 for some
reason.
Make sure this gets passed to probe so that nvmem mac overrides always
work.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20250911221619.16035-1-rosenp@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Support writing MAC TXD for the AddBA Req. Without this commit, the
start sequence number in AddBA Req will be unexpected value for MT7996
and MT7992. This can result in certain stations (e.g., AX200) dropping
packets, leading to ping failures and degraded connectivity. Ensuring
the correct MAC TXD and TXP helps maintain reliable packet transmission
and prevents interoperability issues with affected stations.
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Link: https://patch.msgid.link/20250909-mt7996-addba-txd-fix-v1-1-feec16f0c6f0@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Refactor the initialization and reset flow for tx power setting to
eliminate redundant configurations
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250908071245.1833006-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
In vendor driver, size of group cal and dpd cal for mt7981 includes 6G
although the chip doesn't support it.
mt76 doesn't take this into account which results in reading from the
incorrect offset.
For devices with precal, this would lead to lower bitrate.
Fix this by aligning groupcal size with vendor driver and switch to
freq_list_v2 in mt7915_dpd_freq_idx in order to get the correct offset.
Below are iwinfo of the test device with two clients connected
(iPhone 16, Intel AX210).
Before :
Mode: Master Channel: 36 (5.180 GHz) HT Mode: HE80
Center Channel 1: 42 2: unknown
Tx-Power: 23 dBm Link Quality: 43/70
Signal: -67 dBm Noise: -92 dBm
Bit Rate: 612.4 MBit/s
Encryption: WPA3 SAE (CCMP)
Type: nl80211 HW Mode(s): 802.11ac/ax/n
Hardware: embedded [MediaTek MT7981]
After:
Mode: Master Channel: 36 (5.180 GHz) HT Mode: HE80
Center Channel 1: 42 2: unknown
Tx-Power: 23 dBm Link Quality: 43/70
Signal: -67 dBm Noise: -92 dBm
Bit Rate: 900.6 MBit/s
Encryption: WPA3 SAE (CCMP)
Type: nl80211 HW Mode(s): 802.11ac/ax/n
Hardware: embedded [MediaTek MT7981]
Tested-on: mt7981 20240823
Fixes: 19a954edec63 ("wifi: mt76: mt7915: add mt7986, mt7916 and mt7981 pre-calibration")
Signed-off-by: Zhi-Jun You <hujy652@gmail.com>
Link: https://patch.msgid.link/20250909064824.16847-1-hujy652@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Do not use bitmask in mt76_wed_rro_ind DMA descriptor in order to not
break endianness.
This patch is based on the following series:
https://lore.kernel.org/linux-wireless/20250909-mt7996-rro-rework-v5-0-7d66f6eb7795@kernel.org/T/#m8b488004d69036cd3672b9eeca8005a937ec0313
Fixes: 950d0abb5cd94 ("wifi: mt76: mt7996: add wed rx support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/301d5f2982ddb729c876fb65f9ac2443ce3f5ff1.1757414621.git.lorenzo@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce HW-RRO v3.1 support to be reused when Wireless Ethernet
Dispatcher (WED) is not available. HW-RRO v3.1 is supported by
MT7992 chipset.
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250909-mt7996-rro-rework-v5-16-7d66f6eb7795@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce mt76_dma_get_rxdmad_c_buf routine to process packets received
by HW-RRO v3.1 module.
This is a preliminary patch to introduce SW path for HW-RRO v3.1 module
available on MT7992 chipset.
Co-developed-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250909-mt7996-rro-rework-v5-15-7d66f6eb7795@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Decouple RRO logic from WED support in MT7996 driver in order to reuse
it when WED module is not available.
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250909-mt7996-rro-rework-v5-14-7d66f6eb7795@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce rx_queue_init DMA callback. This is a preliminary patch to
configure RRO RX queues and decouple RRO logic from WED support.
Co-developed-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250909-mt7996-rro-rework-v5-13-7d66f6eb7795@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce rx_rro_ind_process and rx_rro_add_msdu_page callbacks and the
related logic in the MT7996 driver. This is a preliminary patch to
decouple RRO logic from WED support and reuse RRO when WED module is not
available.
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250909-mt7996-rro-rework-v5-12-7d66f6eb7795@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Do not use bitmask in mt7996_wed_rro_addr DMA descriptor in order to not
break endianness
Fixes: 950d0abb5cd94 ("wifi: mt76: mt7996: add wed rx support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250909-mt7996-rro-rework-v5-11-7d66f6eb7795@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce WED offload support for MT7992 chipset in MT7996 driver.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250909-mt7996-rro-rework-v5-10-7d66f6eb7795@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
In order to properly set the number of rx packets for primary WED device
if hif device is available, move hif pointer initialization before
running mt7996_mmio_wed_init routine.
Fixes: 83eafc9251d6d ("wifi: mt76: mt7996: add wed tx support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250909-mt7996-rro-rework-v5-9-7d66f6eb7795@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fix the second phy tx queue initialization if hif device is not
available for MT7990 chipset.
Fixes: 83eafc9251d6d ("wifi: mt76: mt7996: add wed tx support")
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Co-developed-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250909-mt7996-rro-rework-v5-8-7d66f6eb7795@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This is a preliminary patch to enable WED support for MT7992 Kite
chipset supported by MT7996 driver.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250909-mt7996-rro-rework-v5-7-7d66f6eb7795@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This is a preliminary patch to enable WED support for MT7992 Kite
chipset supported by MT7996 driver.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250909-mt7996-rro-rework-v5-6-7d66f6eb7795@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Manage differences in DMA and RX queues configuration for MT7992 and
MT7996.
This is a preliminary patch to enable WED support for MT7992 Kite
chipset supported by MT7996 driver.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250909-mt7996-rro-rework-v5-5-7d66f6eb7795@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Do not initialize NAPIs for WED RRO queues if WED is active.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250909-mt7996-rro-rework-v5-4-7d66f6eb7795@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This is a preliminary patch to enable WED support for MT7992 Kite
chipset supported by MT7996 driver.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250909-mt7996-rro-rework-v5-3-7d66f6eb7795@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Remove q->ndesc check in mt76_dma_rx_fill routine since this is already
done in mt76_dma_rx_fill_buf().
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250909-mt7996-rro-rework-v5-2-7d66f6eb7795@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Remove __mt76_dma_queue_reset routine and use mt76_dma_queue_reset
directly instead in mt76_queue_ops struct.
This is a preliminary patch to enable WED support for MT7992 Kite
chipset supported by MT7996 driver.
Co-developed-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250909-mt7996-rro-rework-v5-1-7d66f6eb7795@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Report MT7996 MLO STA capabilities to mac80211 stack.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250901-mt7996-enable-mlo-client-v1-1-50c46317325d@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|