| Age | Commit message (Collapse) | Author |
|
BIT(7) (PME_Status) is first checked and then set unnecessarily. Remove
the unnecessary setting for the bit that is already on and adjust the
comment related to it.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231124084725.12738-5-ilpo.jarvinen@linux.intel.com
|
|
The rtlwifi driver accesses PCIe capabilities through custom config
offsets. Convert the accesses to use the normal PCIe capability
accessors.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231124084725.12738-4-ilpo.jarvinen@linux.intel.com
|
|
The rtlwifi driver comes with custom code to write into PCIe Link
Control register. RMW access for the Link Control register requires
locking that is already provided by the standard PCIe capability
accessors.
Convert the custom RMW code writing into LNKCTL register to standard
RMW capability accessors. The accesses are changed to cover the full
LNKCTL register instead of touching just a single byte of the register.
Fixes: 0c8173385e54 ("rtl8192ce: Add new driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231124084725.12738-3-ilpo.jarvinen@linux.intel.com
|
|
Ever since introduction in the commit 0c8173385e54 ("rtl8192ce: Add new
driver") the rtlwifi code has, according to comments, attempted to
disable/enable ASPM of the upstream bridge by writing into its LNKCTL
register. However, the code has never been correct because it performs
the writes to the device instead of the upstream bridge.
Worse yet, the offset where the PCIe capabilities reside is derived
from the offset of the upstream bridge. As a result, the write will use
an offset on the device that does not relate to the LNKCTL register
making the ASPM disable/enable code outright dangerous.
Because of those problems, there is no indication that the driver needs
disable/enable ASPM on the upstream bridge. As the Capabilities offset
is not correctly calculated for the write to target device's LNKCTL
register, the code is not disabling/enabling device's ASPM either.
Therefore, just remove the upstream bridge related ASPM disable/enable
code entirely.
The upstream bridge related ASPM code was the only user of the struct
mp_adapter members num4bytes, pcibridge_pciehdr_offset, and
pcibridge_linkctrlreg so those are removed as well.
Note: This change does not remove the code related to changing the
device's ASPM on purpose (which is independent of this flawed code
related to upstream bridge's ASPM).
Suggested-by: Bjorn Helgaas <bhelgaas@kernel.org>
Fixes: 0c8173385e54 ("rtl8192ce: Add new driver")
Fixes: 886e14b65a8f ("rtlwifi: Eliminate raw reads and writes from PCIe portion")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231124084725.12738-2-ilpo.jarvinen@linux.intel.com
|
|
Lukas reports skb_over_panic errors on his Banana Pi BPI-CM4 which comes
with an Amlogic A311D (G12B) SoC and a RTL8822CS SDIO wifi/Bluetooth
combo card. The error he observed is identical to what has been fixed
in commit e967229ead0e ("wifi: rtw88: sdio: Check the HISR RX_REQUEST
bit in rtw_sdio_rx_isr()") but that commit didn't fix Lukas' problem.
Lukas found that disabling or limiting RX aggregation works around the
problem for some time (but does not fully fix it). In the following
discussion a few key topics have been discussed which have an impact on
this problem:
- The Amlogic A311D (G12B) SoC has a hardware bug in the SDIO controller
which prevents DMA transfers. Instead all transfers need to go through
the controller SRAM which limits transfers to 1536 bytes
- rtw88 chips don't split incoming (RX) packets, so if a big packet is
received this is forwarded to the host in it's original form
- rtw88 chips can do RX aggregation, meaning more multiple incoming
packets can be pulled by the host from the card with one MMC/SDIO
transfer. This Depends on settings in the REG_RXDMA_AGG_PG_TH
register (BIT_RXDMA_AGG_PG_TH limits the number of packets that will
be aggregated, BIT_DMA_AGG_TO_V1 configures a timeout for aggregation
and BIT_EN_PRE_CALC makes the chip honor the limits more effectively)
Use multiple consecutive reads in rtw_sdio_read_port() and limit the
number of bytes which are copied by the host from the card in one
MMC/SDIO transfer. This allows receiving a buffer that's larger than
the hosts max_req_size (number of bytes which can be transferred in
one MMC/SDIO transfer). As a result of this the skb_over_panic error
is gone as the rtw88 driver is now able to receive more than 1536 bytes
from the card (either because the incoming packet is larger than that
or because multiple packets have been aggregated).
In case of an receive errors (-EILSEQ has been observed by Lukas) we
need to drain the remaining data from the card's buffer, otherwise the
card will return corrupt data for the next rtw_sdio_read_port() call.
Fixes: 65371a3f14e7 ("wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsets")
Reported-by: Lukas F. Hartmann <lukas@mntre.com>
Closes: https://lore.kernel.org/linux-wireless/CAFBinCBaXtebixKbjkWKW_WXc5k=NdGNaGUjVE8NCPNxOhsb2g@mail.gmail.com/
Suggested-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Lukas F. Hartmann <lukas@mntre.com>
Reported-by: Lukas F. Hartmann <lukas@mntre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Lukas F. Hartmann <lukas@mntre.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231120115726.1569323-1-martin.blumenstingl@googlemail.com
|
|
7 chips
Add functions to configure HCI, DMAC (data MAC), DLE (data link engine),
HFC (HCI flow control), PLE (payload engine) and etc for WiFi 7 chips.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231124071703.132549-9-pkshih@realtek.com
|
|
To share flow with WiFi 7 chips, abstract functions related hardware
engines and their quota, so use pointer to access them. This doesn't change
logic at all.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231124071703.132549-8-pkshih@realtek.com
|
|
WiFi 7 chips will use the same functionalities but different registers to
control hardware components, so move these stuff into functions, and then
we can implement these for WiFi 7 chips later. This patch doesn't change
logic.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231124071703.132549-7-pkshih@realtek.com
|
|
This function, currently called by WoWLAN flow, polls until specific HW
queues are empty. The polling bit definitions are not totally the same
between WiFi 6 and 7 chips. In addition, the check conditions are also
a little different. So, we differentiate the implementations according to
chip gen.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231124071703.132549-6-pkshih@realtek.com
|
|
In queue empty check, one group contains 32 queues. And, the two elements,
wde_qempty_acq_num and wde_qempty_mgq_sel, are number of group and select
of group. To avoid confusing them with queue number and queue selection,
we refine their naming.
(don't change logic at all)
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231124071703.132549-5-pkshih@realtek.com
|
|
DLE stands for Double Link Engine that is used to maintain buffer page.
To avoid linking to wrong pages, we check the used page size during
initialization and stop driver probe if the used size is unexpected.
Currently, we check the page size used by PLE (payload engine) and WDE
(WiFi descriptor engine). For coming WiFi 7 chips, additional reserved
size is added for BB as buffer to run LA mode, so add and check the
reserved size as well.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231124071703.132549-4-pkshih@realtek.com
|
|
The reserved quota of DLE (data link engine) is used for processing next
packet. Add this to get quota number, and then WiFi 7 chips can use them.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231124071703.132549-3-pkshih@realtek.com
|
|
Define 8922A buffer quota that are used by HCI control flow, payload
engine, descriptor engine and etc for operation modes, such as SCC (single
channel concurrence) and download firmware. Since WiFi 7 chips has more
buffer classifications, add fields and struct according to design.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231124071703.132549-2-pkshih@realtek.com
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
Based on the deliberate `sizeof(dest) ... - 1` pattern we can see that
both dump_info->dev_human_readable and dump_info->bus_human_readable are
intended to be NUL-terminated.
Moreover, since this seems to cross the file boundary let's NUL-pad to
ensure no behavior change.
strscpy_pad() covers both the NUL-termination and NUL-padding, let's use
it.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231019-strncpy-drivers-net-wireless-intel-iwlwifi-fw-dbg-c-v2-1-179b211a374b@google.com
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The wrapper of rtw89_debug() is unnecessary, so just remove it.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231122060458.30878-5-pkshih@realtek.com
|
|
A dynamic mechanism is usually an algorithm to adjust registers to adapt
to different environment every two seconds. In field, it could get
unexpected result, so we need to stop it and adjust registers manually, and
then fine tune the algorithm.
To stop mechanisms to assist debugging, add a debugfs entry shown as
Disabled DM: 0x1
[0] DYNAMIC_EDCCA: X
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231122060458.30878-4-pkshih@realtek.com
|
|
Add dynamic mechanism EDCCA (Energy Detection Clear Channel Assessment)
in track work. Using a fixed-value threshold will make EDCCA particularly
sensitive and cause failure to transmit under certain circumstances.
Therefore, the threshold is dynamically adjusted to make EDCCA suitable
for any situation.
However, in some cases, we will adjust the EDCCA threshold to the highest
level so that urgent transmissions can be performed successfully, such as
scanning.
Finally, in order to observe the EDCCA report in time, add the EDCCA perIC
register macro and EDCCA HW report analysis. EDCCA logs can be displayed
by using the EDCCA debug mask.
Signed-off-by: Yi-Chen Chen <jamie_chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231122060458.30878-3-pkshih@realtek.com
|
|
The coming dynamic mechanism of EDCCA adjustment will add a function to
dump registers to reflect status. However, if we are not debugging
the mechanism, we don't print anything, so avoid reading registers by
checking debug mask to reduce IO.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231122060458.30878-2-pkshih@realtek.com
|
|
Clang static checker warns:
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:184:49:
The result of the left shift is undefined due to shifting by '32',
which is greater or equal to the width of type 'u32'.
[core.UndefinedBinaryOperatorResult]
If the value of the right operand is negative or is greater than or
equal to the width of the promoted left operand, the behavior is
undefined.[1][2]
For example, when using different gcc's compilation optimization options
(-O0 or -O2), the result of '(u32)data << 32' is different. One is 0, the
other is old value of data. Let _rtl8821ae_phy_calculate_bit_shift()'s
return value less than 32 to fix this problem. Warn if bitmask is zero.
[1] https://stackoverflow.com/questions/11270492/what-does-the-c-standard-say-about-bitshifting-more-bits-than-the-width-of-type
[2] https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf
Fixes: 21e4b0726dc6 ("rtlwifi: rtl8821ae: Move driver from staging to regular tree")
Signed-off-by: Su Hui <suhui@nfschina.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231127013511.26694-2-suhui@nfschina.com
|
|
Clang static checker warns:
Value stored to 'v1' is never read [deadcode.DeadStores]
Value stored to 'channel' is never read [deadcode.DeadStores]
Remove them to save some place.
Signed-off-by: Su Hui <suhui@nfschina.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231127013511.26694-1-suhui@nfschina.com
|
|
Commit 4b478bf6bdd8 ("wifi: libertas: drop 16-bit PCMCIA support") reworks
the dependencies for config LIBERTAS, and adds alternative dependencies for
USB, SDIO and SPI.
The config option SDIO however does not exist in the kernel tree. It was
probably intended to refer to the config option MMC, which represents
"MMC/SD/SDIO card support" and is used as dependency by various other
drivers that use SDIO.
Fix the dependency to the config option MMC for declaring the requirement
on provision of SDIO support.
Fixes: 4b478bf6bdd8 ("wifi: libertas: drop 16-bit PCMCIA support")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231122083047.12774-1-lukas.bulwahn@gmail.com
|
|
Remove unnecessary wrapper of rtw_dbg(), and just call it directly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231122061429.34487-1-pkshih@realtek.com
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231117093056.873834-13-u.kleine-koenig@pengutronix.de
|
|
./drivers/net/wireless/ralink/rt2x00/rt2800lib.c:1331:47-52: WARNING: conversion to bool not needed here
./drivers/net/wireless/ralink/rt2x00/rt2800lib.c:1332:47-52: WARNING: conversion to bool not needed here
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7531
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231115010017.112081-1-yang.lee@linux.alibaba.com
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231117093056.873834-9-u.kleine-koenig@pengutronix.de
|
|
We are seeing below error randomly in the case where only
one MSI vector is configured:
kernel: ath11k_pci 0000:03:00.0: wmi command 16387 timeout
The reason is, currently, in ath11k_pcic_ext_irq_enable(),
ATH11K_FLAG_EXT_IRQ_ENABLED is set before NAPI is enabled.
This results in a race condition: after
ATH11K_FLAG_EXT_IRQ_ENABLED is set but before NAPI enabled,
CE interrupt breaks in. Since IRQ is shared by CE and data
path, ath11k_pcic_ext_interrupt_handler() is also called
where we call disable_irq_nosync() to disable IRQ. Then
napi_schedule() is called but it does nothing because NAPI
is not enabled at that time, meaning
ath11k_pcic_ext_grp_napi_poll() will never run, so we have
no chance to call enable_irq() to enable IRQ back. Finally
we get above error.
Fix it by setting ATH11K_FLAG_EXT_IRQ_ENABLED after all
NAPI and IRQ work are done. With the fix, we are sure that
by the time ATH11K_FLAG_EXT_IRQ_ENABLED is set, NAPI is
enabled.
Note that the fix above also introduce some side effects:
if ath11k_pcic_ext_interrupt_handler() breaks in after NAPI
enabled but before ATH11K_FLAG_EXT_IRQ_ENABLED set, nothing
will be done by the handler this time, the work will be
postponed till the next time the IRQ fires.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231117003919.26218-1-quic_bqiang@quicinc.com
|
|
The misspelled pauload member of struct ath11k_htc_record is unused,
so remove it.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231127-flexarray-htc_record-v1-3-6be1f36126fd@quicinc.com
|
|
Transform the zero-length arrays in ath10k_htc_record into proper
flexible arrays via the DECLARE_FLEX_ARRAY() macro. This helps with
ongoing efforts to globally enable -Warray-bounds.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231127-flexarray-htc_record-v1-2-6be1f36126fd@quicinc.com
|
|
The misspelled pauload member of struct ath10k_htc_record is unused,
so remove it.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231127-flexarray-htc_record-v1-1-6be1f36126fd@quicinc.com
|
|
Update the copyright for all ath10k files modified on behalf of
Qualcomm Innovation Center, Inc. in 2021 through 2023.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231128-ath12kcopyrights-v1-3-be0b7408cbac@quicinc.com
|
|
Update the copyright for all ath11k files modified on behalf of
Qualcomm Innovation Center, Inc. in 2021 through 2023.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231128-ath12kcopyrights-v1-2-be0b7408cbac@quicinc.com
|
|
Update the copyright for all ath12k files modified on behalf of
Qualcomm Innovation Center, Inc. in 2023.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231128-ath12kcopyrights-v1-1-be0b7408cbac@quicinc.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
wireless fixes:
- debugfs had a deadlock (removal vs. use of files),
fixes going through wireless ACKed by Greg
- support for HT STAs on 320 MHz channels, even if it's
not clear that should ever happen (that's 6 GHz), best
not to WARN()
- fix for the previous CQM fix that broke most cases
- various wiphy locking fixes
- various small driver fixes
* tag 'wireless-2023-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: use wiphy locked debugfs for sdata/link
wifi: mac80211: use wiphy locked debugfs helpers for agg_status
wifi: cfg80211: add locked debugfs wrappers
debugfs: add API to allow debugfs operations cancellation
debugfs: annotate debugfs handlers vs. removal with lockdep
debugfs: fix automount d_fsdata usage
wifi: mac80211: handle 320 MHz in ieee80211_ht_cap_ie_to_sta_ht_cap
wifi: avoid offset calculation on NULL pointer
wifi: cfg80211: hold wiphy mutex for send_interface
wifi: cfg80211: lock wiphy mutex for rfkill poll
wifi: cfg80211: fix CQM for non-range use
wifi: mac80211: do not pass AP_VLAN vif pointer to drivers during flush
wifi: iwlwifi: mvm: fix an error code in iwl_mvm_mld_add_sta()
wifi: mt76: mt7925: fix typo in mt7925_init_he_caps
wifi: mt76: mt7921: fix 6GHz disabled by the missing default CLC config
====================
Link: https://lore.kernel.org/r/20231129150809.31083-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ath9k_htc_txstatus()
Fix an array-index-out-of-bounds read in ath9k_htc_txstatus(). The bug
occurs when txs->cnt, data from a URB provided by a USB device, is
bigger than the size of the array txs->txstatus, which is
HTC_MAX_TX_STATUS. WARN_ON() already checks it, but there is no bug
handling code after the check. Make the function return if that is the
case.
Found by a modified version of syzkaller.
UBSAN: array-index-out-of-bounds in htc_drv_txrx.c
index 13 is out of range for type '__wmi_event_txstatus [12]'
Call Trace:
ath9k_htc_txstatus
ath9k_wmi_event_tasklet
tasklet_action_common
__do_softirq
irq_exit_rxu
sysvec_apic_timer_interrupt
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231113065756.1491991-1-linuxlovemin@yonsei.ac.kr
|
|
No need cast (void *) to (struct owl_ctx *), (struct ath_hw *),
(struct cmd_buf *) or other types.
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230919045226.524544-1-yunchuan@nfschina.com
|
|
Currently data path Rxdma ring structure store the IDR buffer and lock.
These IDR handling is needed only for SW cookie conversion and not
needed for HW cookie conversion. REO Rxdma ring use the HW cookie
conversion and monitor Rxdma ring use the SW cookie conversion.
Since idr not needed for REO Rxdma ring, remove the IDR data entity
from the data path Rxdma ring structure. Introduce the new data path ring
structure for monitor rxmda rings since it need IDR data entity.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00125-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231111043934.20485-5-quic_periyasa@quicinc.com
|
|
Currently Rxdma replenish require HW conversion argument which is
unnecessary argument since ath12k driver configures the Rxdma only
in HW conversion. To optimize the rx data path per packet, avoid
the explicit unnecessary argument and condition check in the rx
replenish.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00125-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231111043934.20485-4-quic_periyasa@quicinc.com
|
|
Currently all Rxdma replenish callers pass the same return
buffer manager id argument, so make it implicitly. To
optimize the rx data path per packet, avoid the explicit
unnecessary argument in Rxdma replenish function.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00125-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231111043934.20485-3-quic_periyasa@quicinc.com
|
|
Currently all Rxdma replenish callers pass zero for the mac id
argument, so make it as zero implicitly. To optimize the rx
data path per packet, avoid the explicit unnecessary argument
in Rxdma replenish function.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00125-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231111043934.20485-2-quic_periyasa@quicinc.com
|
|
When the core rfkill config throws error, it should free the
allocated resources. Currently it is not freeing the core pdev
create resources. Avoid this issue by calling the core pdev
destroy in the error handler of core rfkill config.
Found this issue in the code review and it is compile tested only.
Fixes: 004ccbc0dd49 ("wifi: ath12k: add support for hardware rfkill for WCN7850")
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231111040107.18708-1-quic_periyasa@quicinc.com
|
|
Let ath12k select this option automatically which makes building
more intuitive if the user enables this driver (rather than the
driver not building unless CRYPTO_MICHAEL_MIC is explicitly enabled).
Further investigation shows that ath11k and ath12k are the only who use
'depends on' with CRYPTO_MICHAEL_MIC:
./drivers/net/wireless/intel/ipw2x00/Kconfig: select CRYPTO_MICHAEL_MIC
./drivers/net/wireless/intersil/hostap/Kconfig: select CRYPTO_MICHAEL_MIC
./drivers/net/wireless/intersil/orinoco/Kconfig: select CRYPTO_MICHAEL_MIC
./drivers/net/wireless/ath/ath11k/Kconfig: depends on CRYPTO_MICHAEL_MIC
./drivers/net/wireless/ath/ath12k/Kconfig: depends on CRYPTO_MICHAEL_MIC
./drivers/staging/rtl8192e/Kconfig: select CRYPTO_MICHAEL_MIC
./drivers/staging/ks7010/Kconfig: select CRYPTO_MICHAEL_MIC
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231113153544.282461-2-prestwoj@gmail.com
|
|
Let ath11k select this option automatically which makes building
more intuitive if the user enables this driver (rather than the
driver not building unless CRYPTO_MICHAEL_MIC is explicitly enabled).
Further investigation shows that ath11k and ath12k are the only who use
'depends on' with CRYPTO_MICHAEL_MIC:
./drivers/net/wireless/intel/ipw2x00/Kconfig: select CRYPTO_MICHAEL_MIC
./drivers/net/wireless/intersil/hostap/Kconfig: select CRYPTO_MICHAEL_MIC
./drivers/net/wireless/intersil/orinoco/Kconfig: select CRYPTO_MICHAEL_MIC
./drivers/net/wireless/ath/ath11k/Kconfig: depends on CRYPTO_MICHAEL_MIC
./drivers/net/wireless/ath/ath12k/Kconfig: depends on CRYPTO_MICHAEL_MIC
./drivers/staging/rtl8192e/Kconfig: select CRYPTO_MICHAEL_MIC
./drivers/staging/ks7010/Kconfig: select CRYPTO_MICHAEL_MIC
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231113153544.282461-1-prestwoj@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.8
The first features pull request for v6.8. Not so big in number of
commits but we removed quite a few ancient drivers: libertas 16-bit
PCMCIA support, atmel, hostap, zd1201, orinoco, ray_cs, wl3501 and
rndis_wlan.
Major changes:
cfg80211/mac80211
- extend support for scanning while Multi-Link Operation (MLO) connected
* tag 'wireless-next-2023-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (68 commits)
wifi: nl80211: Documentation update for NL80211_CMD_PORT_AUTHORIZED event
wifi: mac80211: Extend support for scanning while MLO connected
wifi: cfg80211: Extend support for scanning while MLO connected
wifi: ieee80211: fix PV1 frame control field name
rfkill: return ENOTTY on invalid ioctl
MAINTAINERS: update iwlwifi maintainers
wifi: rtw89: 8922a: read efuse content from physical map
wifi: rtw89: 8922a: read efuse content via efuse map struct from logic map
wifi: rtw89: 8852c: read RX gain offset from efuse for 6GHz channels
wifi: rtw89: mac: add to access efuse for WiFi 7 chips
wifi: rtw89: mac: use mac_gen pointer to access about efuse
wifi: rtw89: 8922a: add 8922A basic chip info
wifi: rtlwifi: drop unused const_amdpci_aspm
wifi: mwifiex: mwifiex_process_sleep_confirm_resp(): remove unused priv variable
wifi: rtw89: regd: update regulatory map to R65-R44
wifi: rtw89: regd: handle policy of 6 GHz according to BIOS
wifi: rtw89: acpi: process 6 GHz band policy from DSM
wifi: rtlwifi: simplify rtl_action_proc() and rtl_tx_agg_start()
wifi: rtw89: pci: update interrupt mitigation register for 8922AE
wifi: rtw89: pci: correct interrupt mitigation register for 8852CE
...
====================
Link: https://lore.kernel.org/r/20231127180056.0B48DC433C8@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The read is currently with RCU and the write can deadlock,
convert both for the sake of illustration.
Make mac80211 depend on cfg80211 debugfs to get the helpers,
but mac80211 debugfs without it does nothing anyway. This
also required some adjustments in ath9k.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This error path should return -EINVAL instead of success.
Fixes: 57974a55d995 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/75e4ea09-db58-462f-bd4e-5ad4e5e5dcb5@moroto.mountain
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently wmi.h has two separate set of definitions for peer
flags. One set of flags is defined in enum wmi_tlv_peer_flags, and,
except for the last three, are named WMI_TLV_PEER_*. The other set of
flags are defined as macros, and are named WMI_PEER_*. The last three
macros have the same name as the last three wmi_tlv_peer_flags
enumerators.
The code only uses the WMI_PEER_* names; the WMI_TLV_PEER_* names are
unused. So as a first step in consolidation, remove all the
WMI_TLV_PEER_* names.
But since having an enum to define all the flags is actually a good
thing since that provides a handle by which to refer to the entire set
of flags, recast the WMI_PEER_* macros into enumerators.
Compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231106-ath-peer-flags-v1-4-781e83b7e8e8@quicinc.com
|
|
Currently wmi.h has two separate set of definitions for peer
flags. One set of flags is defined in enum wmi_tlv_peer_flags, and,
except for the last three, are named WMI_TLV_PEER_*. The other set of
flags are defined as macros, and are named WMI_PEER_*. The last three
macros have the same name as the last three wmi_tlv_peer_flags
enumerators.
The code only uses the WMI_PEER_* names; the WMI_TLV_PEER_* names are
unused. So as a first step in consolidation, remove all the
WMI_TLV_PEER_* names.
But since having an enum to define all the flags is actually a good
thing since that provides a handle by which to refer to the entire set
of flags, recast the WMI_PEER_* macros into enumerators.
Compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231106-ath-peer-flags-v1-3-781e83b7e8e8@quicinc.com
|
|
Currently both struct ath12k_wmi_pdev and struct ath12k_wmi_base
define:
const struct wmi_peer_flags_map *peer_flags;
But that member is not used, and in fact, struct wmi_peer_flags_map
is not defined within ath12k; these are obsolete remnants inherited
from ath11k. So remove them.
Compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231106-ath-peer-flags-v1-2-781e83b7e8e8@quicinc.com
|
|
Currently both struct ath11k_pdev_wmi and struct ath11k_wmi_base
define:
const struct wmi_peer_flags_map *peer_flags;
But that member is not used, and in fact, struct wmi_peer_flags_map
is not defined within ath11k; these are obsolete remnants inherited
from ath10k. So remove them.
Compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231106-ath-peer-flags-v1-1-781e83b7e8e8@quicinc.com
|