| Age | Commit message (Collapse) | Author |
|---|
|
Add support for handling start and stop commands, including the
end-of-stream (drain) sequence, in the encoder video device.
This enables proper signaling to the firmware and ensures that all
pending frames are processed and flushed before completing the stream.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Implement support for queuing and dequeuing input and output buffers
for the encoder video device using the appropriate V4L2 buffer
management ioctls.
This enables userspace applications to manage streaming buffers
required for encoding operations.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
[bod: drop dead code size_enc_single_pipe()]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for allocating and queuing internal buffers required by the
encoder. The sizes of these buffers are derived from hardware
specifications and are essential to meet the encoder's functional and
performance requirements.
These buffers are not exposed to userspace; they are allocated and
managed internally to ensure correct and efficient hardware operation.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
[bod: added sm8750 enc_op_int_buf_tbl enumeration during merge]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Initialize and configure platform-specific capabilities for the encoder
in the firmware during stream-on, to tailor encoding behavior to the
current session's requirements. Some of these capabilities can also be
updated dynamically when V4L2 controls are modified by the client after
stream-on.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for V4L2 streaming operations on the encoder video device.
During stream-on, configure mandatory properties on the respective
planes and notify the firmware to initiate an encode session.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
[bod: add sm8750 enc/dec declarations during merge process]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add platform-specific capabilities for the encoder video device and
initialize the corresponding controls in the control handler.
This enables proper configuration and handling of encoder-specific
features based on platform requirements.
Co-developed-by: Wangao Wang <quic_wangaow@quicinc.com>
Signed-off-by: Wangao Wang <quic_wangaow@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
[bod: add sm8750 inst_fw_caps_enc/inst_fw_caps_dec]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add supports for the G/S_PARM V4L2 ioctls for encoder video device with
necessary hooks. This allows userspace to query the current streaming
parameters such as frame intervals and set desired streaming parameters
primarily the frame rate.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for G/S_SELECTION V4L2 ioctls for the encoder video
device with necessary hooks. This allows userspace to query and
configure rectangular selection areas such as crop.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Implement support for V4L2 event subscription on the encoder device by
handling the SUBSCRIBE_EVENT and UNSUBSCRIBE_EVENT ioctls with the
necessary hooks.
This enables userspace applications to subscribe to V4L2 events,
allowing asynchronous notification mechanisms.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for the VIDIOC_QUERYCAP V4L2 iocts for the encoder video
device to report core driver capabilities.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for frame size and frame interval enumeration by
implementing ENUM_FRAMESIZES/FRAMEINTERVALS V4L2 ioctls for encoder
video device with necessary hooks.
This allows userspace application to query encoder capabilities and
adapt encoding configurations accordingly.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add V4L2 format handling support for the encoder by adding
implementation of ENUM/S/G/TRY_FMT with necessary hooks.
This ensures that the encoder supports format negotiation consistent
with V4L2 expectation, enabling userspace applications to configure
resolution, pixel format and buffer layout properly.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Introduce initialization and deinitialization for internal encoder
instance structure with necessary hooks.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for registering a V4L2 encoder video device to the iris
driver. The encoder device is registered with the name
"qcom-iris-encoder".
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Previously, the format validation relied on an array of supported
formats, which only listed formats for the OUTPUT plane. This caused
failures when validating formats for the CAPTURE plane.
Update the check to validate against the only supported format on the
CAPTURE plane, which is NV12.
Fixes: fde6161d91bb ("media: iris: Add HEVC and VP9 formats for decoder")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Improve drain handling by ensuring the LAST flag is attached to final
capture buffer when drain response is received from the firmware.
Previously, the driver failed to attach the V4L2_BUF_FLAG_LAST flag when
a drain response was received from the firmware, relying on userspace to
mark the next queued buffer as LAST. This update fixes the issue by
checking the pending drain status, attaching the LAST flag to the
capture buffer received from the firmware (with EOS attached), and
returning it to the V4L2 layer correctly.
Fixes: d09100763bed ("media: iris: add support for drain sequence")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Firmware can handle a dummy address for buffers with the EOS flag. To
ensure consistent behavior across all codecs, update the drain
command to always send a dummy buffer address.
This makes the drain handling uniform and avoids any codec specific
assumptions.
Fixes: 478c4478610d ("media: iris: Add codec specific check for VP9 decoder drain handling")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
For HFI Gen1, the instances substate is changed to LOAD_RESOURCES only
when a START command is issues to the firmware. If STOP is called
without a prior START, the firmware may reject the command and throw
some erros.
Handle this by adding a substate check before issuing STOP command to
the firmware.
Fixes: 11712ce70f8e ("media: iris: implement vb2 streaming ops")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Remove earlier complex conditional checks in the non-streaming path that
attempted to verify if stop was called on a plane that was previously
started. These explicit checks are redundant, as vb2 already ensures
that stop is only called on ports that have been started, maintaining
correct buffer state management.
Fixes: 11712ce70f8e ("media: iris: implement vb2 streaming ops")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Update the vbuf flags appropriately in error cases before calling
v4l2_m2m_buf_done(). Previously, the flag update was skippied in error
scenario, which could result in incorrect state reporting for buffers.
Fixes: 17f2a485ca67 ("media: iris: implement vb2 ops for buf_queue and firmware response")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Currently, internal buffers are destroyed only if 'PENDING_RELEASE' flag
is set when a release response is received from the firmware, which is
incorrect. Internal buffers should always be destroyed when the firmware
explicitly releases it, regardless of whether the 'PENDING_RELEASE' flag
was set by the driver. This is specially important during force-stop
scenarios, where the firmware may release buffers without driver marking
them for release.
Fix this by removing the incorrect check and ensuring all buffers are
properly cleaned up.
Fixes: 73702f45db81 ("media: iris: allocate, initialize and queue internal buffers")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
A client (e.g., GST for encoder) can initiate streaming on the capture
port before the output port, causing the instance state to transition to
OUTPUT_STREAMING. When streaming is subsequently started on the output
port, the instance state advances to STREAMING, and the substate should
transition to LOAD_RESOURCES.
Previously, the code blocked the substate transition to LOAD_RESOURCES
if the instance state was OUTPUT_STREAMING. This update modifies the
logic to permit the substate transition to LOAD_RESOURCES when the
instance state is OUTPUT_STREAMING, thereby supporting this client
streaming sequence.
Fixes: 547f7b8c5090 ("media: iris: add check to allow sub states transitions")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The previous check to block capture port streaming before output port
was incorrect and caused some valid usecase to fail. While removing that
check allows capture port to enter streaming independently, it also
introduced firmware errors due to premature queuing of DPB buffers
before the firmware session was fully started which happens only when
streamon is called on output port.
Fix this by deferring DPB buffer queuing to the firmware until both
capture and output are streaming and state is 'STREAMING'.
Fixes: 11712ce70f8e ("media: iris: implement vb2 streaming ops")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
One internal buffer which is allocated only once per session was not
being freed during session close because it was not being tracked as
part of internal buffer list which resulted in a memory leak.
Add the necessary logic to explicitly free the untracked internal buffer
during session close to ensure all allocated memory is released
properly.
Fixes: 73702f45db81 ("media: iris: allocate, initialize and queue internal buffers")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add error reporting for unreleased PERSIST internal buffers in
iris_check_num_queued_internal_buffers(). This ensures all buffer types
are checked and logged if not freed during session close, helping to
detect memory leaks and improve driver robustness. No change to buffer
lifecycle or allocation logic.
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Initialize the count variable to zero before counting unreleased
internal buffers in iris_check_num_queued_internal_buffers().
This prevents stale values from previous iterations and ensures accurate
error reporting for each buffer type. Without this initialization, the
count could accumulate across types, leading to incorrect log messages.
Fixes: d2abb1ff5a3c ("media: iris: Verify internal buffer release on close")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Media endpoints are not devices, and there is no valid or sane usecase,
when an endpoint on the ISP side is an unavailable device.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
For sake of simplicity it makes sense to register all CAMSS subdevices
from its async notifier, this will cover all possible use cases, even
if there is no connected sensors to the CAMSS ISP.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
There is no potential for a custom .link_entities callback, remove it
by replacing with a common camss_link_entities().
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[bod: amended for qcm2290, qcs8300, sa8775p]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Enumerate csiphy, csid and vfe resources for qcs8300.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The vfe in qcs8300 is version 690, it is same as vfe used in
lemans(sa8775p). vfe gen3 have support for vfe 690.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The CSID in qcs8300 is version 690, it is same as csid used in
lemans(sa8775p). csid gen3 have support for csid 690.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
QCS8300 uses the same CSIPHY hardware version (v1.3.0) as
SA8775P. The only difference between the two platforms is
the number of CSIPHY instances: SA8775P has four, while
QCS8300 has three.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add CAMSS_8300 enum, QCS8300 compatible and qcs8300 camss driver
private data, the private data just include some basic information
for now, later changes will enumerate with csiphy, tpg, csid and
vfe resources.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Enumerate csiphy, csid and vfe resources for lemans soc.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for VFE 690 found on lemans(SA8775P). This is
different from vfe 780 w.r.t few register offsets. It
supports two full and five lite VFE.
Co-developed-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Co-developed-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for CSID 690 found on lemans(sa8775p) soc, This
is different from csid 780 w.r.t few register offsets and
bit-fields.
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for CSIPHY (v1.3.0) found on lemans(sa8775p). This
implementation is based on the titan 690 implementation.
Co-developed-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add CAMSS_8775P enum, compatible and lemans(sa8775p) camss driver
private data, the private data just include some basic information
now, later changes will enumerate with csiphy, tpg, csid and vfe
resources.
Co-developed-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Rename the file camss-vfe-780.c to camss-vfe-gen3.c to enable
reuse of VFE logic across multiple SoCs.
The lemans(sa8775p) SoC includes VFE 690, which is very similar
to VFE 780, with only minor differences in register bitfields.
Rename prepares the codebase for supporting additional SoCs
without duplicating VFE logic.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Rename the file camss-csid-780.c to camss-csid-gen3.c to enable
reuse of CSID logic across multiple SoCs.
The lemans(sa8775p) SoC includes CSID 690, which is functionally very
similar to CSID 780, with only minor differences in register
bitfields. This rename prepares the codebase for supporting
additional SoCs without duplicating CSID logic.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The camera subsystem for QCM2290 which is based on Spectra 340.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
This is the CSI PHY version found in QCS2290/QCM2290 SoCs.
The table is extracted from downstream camera driver.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for CSID found in QCM2290, it's a simplified gen-2 version.
- There is no Test Pattern Generator (moved outside CSID)
- There is no subsampling (moved to CAMIF module)
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for TFE (Thin Front End) found in QCM2290.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[bod: made tfe_line_iface_map and tfe_subgroup_line map static]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
When we succeed loading the firmware, we don't want to hold on to the
firmware pointer anymore, since it won't be freed anywhere else. The same
applies for the mapped memory. Unmapping the memory is particularly
important since the memory will be protected after the Iris firmware is
started, so we need to make sure there will be no accidental access to this
region (even if just a speculative one from the CPU).
Almost the same firmware loading code also exists in venus/firmware.c,
there it is implemented correctly.
Fix this by dropping the early "return ret" and move the call of
qcom_scm_pas_auth_and_reset() out of iris_load_fw_to_memory(). We should
unmap the memory before bringing the firmware out of reset.
Cc: stable@vger.kernel.org
Fixes: d19b163356b8 ("media: iris: implement video firmware load/unload")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for SM8750 Iris codec with major differences against
previous generation SM8650:
1. New clocks and new resets, thus new power up and power down
sequences,
2. New WRAPPER_IRIS_VCODEC_VPU_WRAPPER_SPARE_0 register programmed
during boot-up
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Current devices use same power up sequence, but starting with Qualcomm
SM8750 (VPU v3.5) the sequence will grow quite a bit, so allow
customizing it. No functional change so far for existing devices.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Driver implements different callbacks for the power off controller
(.power_off_controller):
- iris_vpu_power_off_controller,
- iris_vpu33_power_off_controller,
The generic wrapper for handling power off - iris_vpu_power_off() -
calls them via 'iris_platform_data->vpu_ops', so shall the cleanup code
in iris_vpu_power_on().
This makes also sense if looking at caller of iris_vpu_power_on(), which
unwinds also with the wrapper calling respective platfortm code (unwinds
with iris_vpu_power_off()).
Otherwise power off sequence on the newer VPU3.3 in error path is not
complete.
Fixes: c69df5de4ac3 ("media: platform: qcom/iris: add power_off_controller to vpu_ops")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add the missing write to AON_WRAPPER_MVP_NOC_LPI_CONTROL before
reading the LPI status register. Introduce a handshake loop to ensure
MNoC enters low power mode reliably during VPU3 hardware power-off with
timeout handling.
Fixes: 02083a1e00ae ("media: platform: qcom/iris: add support for vpu33")
Cc: stable@vger.kernel.org
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
