summaryrefslogtreecommitdiff
path: root/drivers/input/misc
AgeCommit message (Collapse)Author
2019-02-20Input: bma150 - register input device after setting private dataJonathan Bakker
commit 90cc55f067f6ca0e64e5e52883ece47d8af7b67b upstream. Otherwise we introduce a race condition where userspace can request input before we're ready leading to null pointer dereference such as input: bma150 as /devices/platform/i2c-gpio-2/i2c-5/5-0038/input/input3 Unable to handle kernel NULL pointer dereference at virtual address 00000018 pgd = (ptrval) [00000018] *pgd=55dac831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: bma150 input_polldev [last unloaded: bma150] CPU: 0 PID: 2870 Comm: accelerometer Not tainted 5.0.0-rc3-dirty #46 Hardware name: Samsung S5PC110/S5PV210-based board PC is at input_event+0x8/0x60 LR is at bma150_report_xyz+0x9c/0xe0 [bma150] pc : [<80450f70>] lr : [<7f0a614c>] psr: 800d0013 sp : a4c1fd78 ip : 00000081 fp : 00020000 r10: 00000000 r9 : a5e2944c r8 : a7455000 r7 : 00000016 r6 : 00000101 r5 : a7617940 r4 : 80909048 r3 : fffffff2 r2 : 00000000 r1 : 00000003 r0 : 00000000 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 54e34019 DAC: 00000051 Process accelerometer (pid: 2870, stack limit = 0x(ptrval)) Stackck: (0xa4c1fd78 to 0xa4c20000) fd60: fffffff3 fc813f6c fd80: 40410581 d7530ce3 a5e2817c a7617f00 a5e29404 a5e2817c 00000000 7f008324 fda0: a5e28000 8044f59c a5fdd9d0 a5e2945c a46a4a00 a5e29668 a7455000 80454f10 fdc0: 80909048 a5e29668 a5fdd9d0 a46a4a00 806316d0 00000000 a46a4a00 801df5f0 fde0: 00000000 d7530ce3 a4c1fec0 a46a4a00 00000000 a5fdd9d0 a46a4a08 801df53c fe00: 00000000 801d74bc a4c1fec0 00000000 a4c1ff70 00000000 a7038da8 00000000 fe20: a46a4a00 801e91fc a411bbe0 801f2e88 00000004 00000000 80909048 00000041 fe40: 00000000 00020000 00000000 dead4ead a6a88da0 00000000 ffffe000 806fcae8 fe60: a4c1fec8 00000000 80909048 00000002 a5fdd9d0 a7660110 a411bab0 00000001 fe80: dead4ead ffffffff ffffffff a4c1fe8c a4c1fe8c d7530ce3 20000013 80909048 fea0: 80909048 a4c1ff70 00000001 fffff000 a4c1e000 00000005 00026038 801eabd8 fec0: a7660110 a411bab0 b9394901 00000006 a696201b 76fb3000 00000000 a7039720 fee0: a5fdd9d0 00000101 00000002 00000096 00000000 00000000 00000000 a4c1ff00 ff00: a6b310f4 805cb174 a6b310f4 00000010 00000fe0 00000010 a4c1e000 d7530ce3 ff20: 00000003 a5f41400 a5f41424 00000000 a6962000 00000000 00000003 00000002 ff40: ffffff9c 000a0000 80909048 d7530ce3 a6962000 00000003 80909048 ffffff9c ff60: a6962000 801d890c 00000000 00000000 00020000 a7590000 00000004 00000100 ff80: 00000001 d7530ce3 000288b8 00026320 000288b8 00000005 80101204 a4c1e000 ffa0: 00000005 80101000 000288b8 00026320 000288b8 000a0000 00000000 00000000 ffc0: 000288b8 00026320 000288b8 00000005 7eef3bac 000264e8 00028ad8 00026038 ffe0: 00000005 7eef3300 76f76e91 76f78546 800d0030 000288b8 00000000 00000000 [<80450f70>] (input_event) from [<a5e2817c>] (0xa5e2817c) Code: e1a08148 eaffffa8 e351001f 812fff1e (e590c018) ---[ end trace 1c691ee85f2ff243 ]--- Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01Input: initialize device counter variables with -1Aniroop Mathur
[ Upstream commit 939ffb1712890ee22146d2dfc24adbc7da6afa84 ] Let's initialize atomic_t variables keeping track of number of various devices created so far with -1 in order to avoid extra subtraction operation. Signed-off-by: Aniroop Mathur <aniroop.mathur@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-01-31Input: twl4030-vibra - fix sibling-node lookupJohan Hovold
commit 5b189201993ab03001a398de731045bfea90c689 upstream. A helper purported to look up a child node based on its name was using the wrong of-helper and ended up prematurely freeing the parent of-node while searching the whole device tree depth-first starting at the parent node. Fixes: 64b9e4d803b1 ("input: twl4030-vibra: Support for DT booted kernel") Fixes: e661d0a04462 ("Input: twl4030-vibra - fix ERROR: Bad of_node_put() warning") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31Input: twl4030-vibra - fix ERROR: Bad of_node_put() warningMarek Belisko
commit e661d0a04462dd98667f8947141bd8defab5b34a upstream. Fix following: [ 8.862274] ERROR: Bad of_node_put() on /ocp/i2c@48070000/twl@48/audio [ 8.869293] CPU: 0 PID: 1003 Comm: modprobe Not tainted 4.2.0-rc2-letux+ #1175 [ 8.876922] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 8.883514] [<c00159e0>] (unwind_backtrace) from [<c0012488>] (show_stack+0x10/0x14) [ 8.891693] [<c0012488>] (show_stack) from [<c05cb810>] (dump_stack+0x78/0x94) [ 8.899322] [<c05cb810>] (dump_stack) from [<c02cfd5c>] (kobject_release+0x68/0x7c) [ 8.907409] [<c02cfd5c>] (kobject_release) from [<bf0040c4>] (twl4030_vibra_probe+0x74/0x188 [twl4030_vibra]) [ 8.917877] [<bf0040c4>] (twl4030_vibra_probe [twl4030_vibra]) from [<c03816ac>] (platform_drv_probe+0x48/0x90) [ 8.928497] [<c03816ac>] (platform_drv_probe) from [<c037feb4>] (really_probe+0xd4/0x238) [ 8.937103] [<c037feb4>] (really_probe) from [<c0380160>] (driver_probe_device+0x30/0x48) [ 8.945678] [<c0380160>] (driver_probe_device) from [<c03801e0>] (__driver_attach+0x68/0x8c) [ 8.954589] [<c03801e0>] (__driver_attach) from [<c037ea60>] (bus_for_each_dev+0x50/0x84) [ 8.963226] [<c037ea60>] (bus_for_each_dev) from [<c037f828>] (bus_add_driver+0xcc/0x1e4) [ 8.971832] [<c037f828>] (bus_add_driver) from [<c0380b60>] (driver_register+0x9c/0xe0) [ 8.980255] [<c0380b60>] (driver_register) from [<c00097e0>] (do_one_initcall+0x100/0x1b8) [ 8.988983] [<c00097e0>] (do_one_initcall) from [<c00b8008>] (do_init_module+0x58/0x1c0) [ 8.997497] [<c00b8008>] (do_init_module) from [<c00b8cac>] (SyS_init_module+0x54/0x64) [ 9.005950] [<c00b8cac>] (SyS_init_module) from [<c000ed20>] (ret_fast_syscall+0x0/0x54) [ 9.015838] input: twl4030:vibrator as /devices/platform/68000000.ocp/48070000.i2c/i2c-0/0-0048/48070000.i2c:twl@48:audio/input/input2 node passed to of_find_node_by_name is put inside that function and new node is returned if found. Free returned node not already freed node. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31Input: twl6040-vibra - fix child-node lookupJohan Hovold
commit dcaf12a8b0bbdbfcfa2be8dff2c4948d9844b4ad upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at parent rather than just matching on its children. Later sanity checks on node properties (which would likely be missing) should prevent this from causing much trouble however, especially as the original premature free of the parent node has already been fixed separately (but that "fix" was apparently never backported to stable). Fixes: e7ec014a47e4 ("Input: twl6040-vibra - update for device tree support") Fixes: c52c545ead97 ("Input: twl6040-vibra - fix DT node memory management") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> (on Pyra OMAP5 hardware) Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31Input: twl6040-vibra - fix DT node memory managementH. Nikolaus Schaller
commit c52c545ead97fcc2f4f8ea38f1ae3c23211e09a8 upstream. commit e7ec014a47e4 ("Input: twl6040-vibra - update for device tree support") made the separate vibra DT node to a subnode of the twl6040. It now calls of_find_node_by_name() to locate the "vibra" subnode. This function has a side effect to call of_node_put on() for the twl6040 parent node passed in as a parameter. This causes trouble later on. Solution: we must call of_node_get() before of_find_node_by_name() Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-18Input: ims-psu - check if CDC union descriptor is saneDmitry Torokhov
commit ea04efee7635c9120d015dcdeeeb6988130cb67a upstream. Before trying to use CDC union descriptor, try to validate whether that it is sane by checking that intf->altsetting->extra is big enough and that descriptor bLength is not too big and not too small. Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-22Input: cm109 - validate number of endpoints before using themJohan Hovold
commit ac2ee9ba953afe88f7a673e1c0c839227b1d7891 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: c04148f915e5 ("Input: add driver for USB VoIP phones with CM109...") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-22Input: yealink - validate number of endpoints before using themJohan Hovold
commit 5cc4a1a9f5c179795c8a1f2b0f4361829d6a070e upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: aca951a22a1d ("[PATCH] input-driver-yealink-P1K-usb-phone") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-22Input: ims-pcu - validate number of endpoints before using themJohan Hovold
commit 1916d319271664241b7aa0cd2b05e32bdb310ce9 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack control-interface endpoints. Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-15Input: drv260x - fix input device's parent assignmentJingkui Wang
[ Upstream commit 5a8a6b89c15766446d845671d574a9243b6d8786 ] We were assigning I2C bus controller instead of client as parent device. Besides being logically wrong, it messed up with devm handling of input device. As a result we were leaving input device and event node behind after rmmod-ing the driver, which lead to a kernel oops if one were to access the event node later. Let's remove the assignment and rely on devm_input_allocate_device() to set it up properly for us. Signed-off-by: Jingkui Wang <jkwang@google.com> Fixes: 7132fe4f5687 ("Input: drv260x - add TI drv260x haptics driver") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-07-12Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delayStephen Boyd
[ Upstream commit eda5ecc0a6b865561997e177c393f0b0136fe3b7 ] The trigger delay algorithm that converts from microseconds to the register value looks incorrect. According to most of the PMIC documentation, the equation is delay (Seconds) = (1 / 1024) * 2 ^ (x + 4) except for one case where the documentation looks to have a formatting issue and the equation looks like delay (Seconds) = (1 / 1024) * 2 x + 4 Most likely this driver was written with the improper documentation to begin with. According to the downstream sources the valid delays are from 2 seconds to 1/64 second, and the latter equation just doesn't make sense for that. Let's fix the algorithm and the range check to match the documentation and the downstream sources. Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: 92d57a73e410 ("input: Add support for Qualcomm PMIC8XXX power key") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: John Stultz <john.stultz@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-06-06Input: uinput - handle compat ioctl for UI_SET_PHYSRicky Liang
[ Upstream commit affa80bd97f7ca282d1faa91667b3ee9e4c590e6 ] When running a 32-bit userspace on a 64-bit kernel, the UI_SET_PHYS ioctl needs to be treated with special care, as it has the pointer size encoded in the command. Signed-off-by: Ricky Liang <jcliang@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-05-17Input: max8997-haptic - fix NULL pointer dereferenceMarek Szyprowski
[ Upstream commit 6ae645d5fa385f3787bf1723639cd907fe5865e7 ] NULL pointer derefence happens when booting with DTB because the platform data for haptic device is not set in supplied data from parent MFD device. The MFD device creates only platform data (from Device Tree) for itself, not for haptic child. Unable to handle kernel NULL pointer dereference at virtual address 0000009c pgd = c0004000 [0000009c] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM (max8997_haptic_probe) from [<c03f9cec>] (platform_drv_probe+0x4c/0xb0) (platform_drv_probe) from [<c03f8440>] (driver_probe_device+0x214/0x2c0) (driver_probe_device) from [<c03f8598>] (__driver_attach+0xac/0xb0) (__driver_attach) from [<c03f67ac>] (bus_for_each_dev+0x68/0x9c) (bus_for_each_dev) from [<c03f7a38>] (bus_add_driver+0x1a0/0x218) (bus_add_driver) from [<c03f8db0>] (driver_register+0x78/0xf8) (driver_register) from [<c0101774>] (do_one_initcall+0x90/0x1d8) (do_one_initcall) from [<c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc) (kernel_init_freeable) from [<c06bb5b4>] (kernel_init+0x8/0x114) (kernel_init) from [<c0107938>] (ret_from_fork+0x14/0x3c) Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: <stable@vger.kernel.org> Fixes: 104594b01ce7 ("Input: add driver support for MAX8997-haptic") [k.kozlowski: Write commit message, add CC-stable] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-04-18Input: ati_remote2 - fix crashes on detecting device with invalid descriptorVladis Dronov
[ Upstream commit 950336ba3e4a1ffd2ca60d29f6ef386dd2c7351d ] The ati_remote2 driver expects at least two interfaces with one endpoint each. If given malicious descriptor that specify one interface or no endpoints, it will crash in the probe function. Ensure there is at least two interfaces and one endpoint for each interface before using it. The full disclosure: http://seclists.org/bugtraq/2016/Mar/90 Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-04-18Input: ims-pcu - sanity check against missing interfacesOliver Neukum
[ Upstream commit a0ad220c96692eda76b2e3fd7279f3dcd1d8a8ff ] A malicious device missing interface can make the driver oops. Add sanity checking. Signed-off-by: Oliver Neukum <ONeukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-04-18Input: powermate - fix oops with malicious USB descriptorsJosh Boyer
[ Upstream commit 9c6ba456711687b794dcf285856fc14e2c76074f ] The powermate driver expects at least one valid USB endpoint in its probe function. If given malicious descriptors that specify 0 for the number of endpoints, it will crash. Validate the number of endpoints on the interface before using them. The full report for this issue can be found here: http://seclists.org/bugtraq/2016/Mar/85 Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2014-11-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "Mostly small fixups to PS/2 tochpad drivers (ALPS, Elantech, Synaptics) to better deal with specific hardware" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - update the documentation Input: elantech - provide a sysfs knob for crc_enabled Input: elantech - report the middle button of the touchpad Input: alps - ignore bad data on Dell Latitudes E6440 and E7440 Input: alps - allow up to 2 invalid packets without resetting device Input: alps - ignore potential bare packets when device is out of sync Input: elantech - fix crc_enabled for Fujitsu H730 Input: elantech - use elantech_report_trackpoint for hardware v4 too Input: twl4030-pwrbutton - ensure a wakeup event is recorded. Input: synaptics - add min/max quirk for Lenovo T440s
2014-11-08Input: twl4030-pwrbutton - ensure a wakeup event is recorded.NeilBrown
This button is treated as a wakeup source, so we need to initialise it correctly. Without the device_init_wakeup() call, dev->power.wakeup will be NULL, and pm_wakeup_event() will do nothing. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A bunch of fixes for minor defects reported by Coverity, a few driver fixups and revert of i8042.nomux change so that we are once again enable active MUX mode if box claims to support it" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: i8042 - disable active multiplexing by default" Input: altera_ps2 - use correct type for irq return value Input: altera_ps2 - write to correct register when disabling interrupts Input: max77693-haptic - fix potential overflow Input: psmouse - remove unneeded check in psmouse_reconnect() Input: vsxxxaa - fix code dropping bytes from queue Input: ims-pcu - fix dead code in ims_pcu_ofn_reg_addr_store() Input: opencores-kbd - fix error handling Input: wm97xx - adapt parameters to tosa touchscreen. Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544 Input: stmpe-keypad - fix valid key line bitmask Input: soc_button_array - update calls to gpiod_get*()
2014-10-31Input: max77693-haptic - fix potential overflowDmitry Torokhov
Expression haptic->pwm_dev->period * haptic->magnitude is of type 'unsigned int' and may overflow. We need to convert one of the operands to u64 before multiplying, instead of casting result (potentially overflown) to u64. Reported by Coverity: CID 1248753 Acked-by : Jaewon Kim <jaewon02.kim@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-28Input: ims-pcu - fix dead code in ims_pcu_ofn_reg_addr_store()Dmitry Torokhov
Coverity pointed out that at return point error is always 0 so the conditional is not needed. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-24Input: soc_button_array - update calls to gpiod_get*()Alexandre Courbot
Add the new flags argument to calls of (devm_)gpiod_get*(). Currently both forms (with or without the flags argument) are valid thanks to transitional macros in <linux/gpio/consumer.h>. These macros will be removed once all consumers are updated and the flags argument will become compulsory. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull second round of input updates from Dmitry Torokhov: "Mostly simple bug fixes, although we do have one brand new driver for Microchip AR1021 i2c touchscreen. Also there is the change to stop trying to use i8042 active multiplexing by default (it is still possible to activate it via i8042.nomux=0 on boxes that implement it)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add Thrustmaster as Xbox 360 controller vendor Input: xpad - add USB ID for Thrustmaster Ferrari 458 Racing Wheel Input: max77693-haptic - fix state check in imax77693_haptic_disable() Input: xen-kbdfront - free grant table entry in xenkbd_disconnect_backend Input: alps - fix v4 button press recognition Input: i8042 - disable active multiplexing by default Input: i8042 - add noloop quirk for Asus X750LN Input: synaptics - gate forcepad support by DMI check Input: Add Microchip AR1021 i2c touchscreen Input: cros_ec_keyb - add of match table Input: serio - avoid negative serio device numbers Input: avoid negative input device numbers Input: automatically set EV_ABS bit in input_set_abs_params Input: adp5588-keys - cancel workqueue in failure path Input: opencores-kbd - switch to using managed resources Input: evdev - fix EVIOCG{type} ioctl
2014-10-16Input: max77693-haptic - fix state check in imax77693_haptic_disable()Jaewon Kim
The check to see whether the device is already disabled in max77693_haptic_disable() was inversed, this change corrects it. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-16Input: xen-kbdfront - free grant table entry in xenkbd_disconnect_backendChang Huaixin
xenkbd_disconnect_backend doesn't free grant table entry. This bug affects live migration. xenkbd_disconnect_backend uses gnttab_end_foreign_access_ref to handle grant table entry which doesn't really free an entry. Thus every time we do xenkbd_resume, grant table entry increses by one. As an grant table entry occupies 8 bytes, an grant table page has at most 512 entries. Every 512 times we do xenkdb_resume, grant table pages increses by one. After around 3500 times of live migration, grant table pages will increase by 7, causing too many pages to populate and hitting max_pages limit when assigning pages.Thus assign_pages will fail, so will live migration. Signed-off-by: Chang Huaixin <huaixin.chx@alibaba-inc.com> Acked-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-11Merge tag 'stable/for-linus-3.18-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen updates from David Vrabel: "Features and fixes: - Add pvscsi frontend and backend drivers. - Remove _PAGE_IOMAP PTE flag, freeing it for alternate uses. - Try and keep memory contiguous during PV memory setup (reduces SWIOTLB usage). - Allow front/back drivers to use threaded irqs. - Support large initrds in PV guests. - Fix PVH guests in preparation for Xen 4.5" * tag 'stable/for-linus-3.18-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (22 commits) xen: remove DEFINE_XENBUS_DRIVER() macro xen/xenbus: Remove BUG_ON() when error string trucated xen/xenbus: Correct the comments for xenbus_grant_ring() x86/xen: Set EFER.NX and EFER.SCE in PVH guests xen: eliminate scalability issues from initrd handling xen: sync some headers with xen tree xen: make pvscsi frontend dependant on xenbus frontend arm{,64}/xen: Remove "EXPERIMENTAL" in the description of the Xen options xen-scsifront: don't deadlock if the ring becomes full x86: remove the Xen-specific _PAGE_IOMAP PTE flag x86/xen: do not use _PAGE_IOMAP PTE flag for I/O mappings x86: skip check for spurious faults for non-present faults xen/efi: Directly include needed headers xen-scsiback: clean up a type issue in scsiback_make_tpg() xen-scsifront: use GFP_ATOMIC under spin_lock MAINTAINERS: Add xen pvscsi maintainer xen-scsiback: Add Xen PV SCSI backend driver xen-scsifront: Add Xen PV SCSI frontend driver xen: Add Xen pvSCSI protocol description xen/events: support threaded irqs for interdomain event channels ...
2014-10-06xen: remove DEFINE_XENBUS_DRIVER() macroDavid Vrabel
The DEFINE_XENBUS_DRIVER() macro looks a bit weird and causes sparse errors. Replace the uses with standard structure definitions instead. This is similar to pci and usb device registration. Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-09-24Input: soc_button_array - convert to platform busJin Yao
ACPI device enumeration mechanism changed a lot since 3.16-rc1. ACPI device objects with _HID will be enumerated to platform bus by default. For the existing PNP drivers that probe the PNPACPI devices, the device ids are listed explicitly in drivers/acpi/acpi_pnp.c. But ACPI folks will continue their effort on shrinking this id list by converting the PNP drivers to platform drivers, for the devices that don't belong to PNP bus in nature. Signed-off-by: Jin Yao <yao.jin@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-15Input: palmas-pwrbutton - fix typo in the license stringNishanth Menon
Follow the license string convention indicated in include/linux/module.h (don't capitalize v). This fixes following randconfig warning: FATAL: modpost: GPL-incompatible module palmas-pwrbutton.ko uses GPL-only symbol 'platform_driver_unregister' Fixes: adff5962fdd2 ("Input: introduce palmas-pwrbutton") Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-15Input: palmas-pwrbutton - use IRQF_ONESHOTNishanth Menon
make C=2 CHECK="scripts/coccicheck" MODE=report COCCI=scripts/coccinelle/misc/irqf_oneshot.cocci ./drivers/input/misc/palmas-pwrbutton.o Reports: drivers/input/misc/palmas-pwrbutton.c:213:9-29: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Palmas power button just needs threaded IRQ handler since I2C operations are involved and there is nothing in non-threaded primary handler we could do. So mark the request with ONESHOT as it should have been done in these cases. Fixes: adff5962fdd2 ("Input: introduce palmas-pwrbutton") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-11Input: add haptic driver on max77693Jaewon Kim
This driver to supports the haptic controller on MAX77693 Multifunction device with PMIC, CHARGER, LED, MUIC, HAPTIC. This driver supports external pwm and LRA (Linear Resonant Actuator) motor. User can control the haptic device via force feedback framework. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-11Input: introduce palmas-pwrbuttonNishanth Menon
Many palmas family of PMICs have support for interrupt based power button. This allows the device to notify the processor of external push button events over the shared palmas interrupt. However, this event is generated only during a "press" operation. Software is supposed to poll(sigh!) for detecting a release event. The PMIC also supports ability to power off independent of the software decisions when the button is pressed for a long duration if the PMIC is appropriately configured on the platform. Even though the function is similar to twl4030_pwrbutton, it is substantially different in operation to belong to a new driver of it's own. Based on original work done by Girish S Ghongdemath <girishsg@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-08Input: add support for the DRV2667 haptic driverDan Murphy
Adding support for the DRV2667 haptic driver. This device has the ability to store vibration patterns in RAM and execute them once the GO bit is set. The initial driver sets a basic waveform in the first waveform sequence and will play the waveform when the GO bit is set and will continously play the waveform until the GO bit is unset. Data sheet is here: http://www.ti.com/product/drv2667 Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-03Merge tag 'v3.17-rc3' into nextDmitry Torokhov
Sync with mainline to bring in Chrome EC changes.
2014-08-26Input: drv260x - add check for ERM mode and LRA LibrariesDan Murphy
Add a check to ensure that LRA libraries are not mixed with the ERM mode. If ERM mode and the Library is empty "OR" the LRA library then exit, as the LRA and empty libraries are not applicable for the ERM actuator. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-26Input: drv260x - remove unused definesDan Murphy
Removing some #defines that are not and should never be used pertaining to I2C. Removing: define DRV260X_ALLOWED_R_BYTES 25 define DRV260X_ALLOWED_W_BYTES 2 define DRV260X_MAX_RW_RETRIES 5 define DRV260X_I2C_RETRY_DELAY 10 Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-19Input: drv260x - add TI drv260x haptics driverDan Murphy
Add the TI drv260x haptics/vibrator driver. This device uses the input force feedback to produce a wave form to driver an ERM or LRA actuator device. The initial driver supports the devices real time playback mode. But the device has additional wave patterns in ROM. This functionality will be added in future patchsets. Product data sheet is located here: http://www.ti.com/product/drv2605 Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - big update to Wacom driver by Benjamin Tissoires, converting it to HID infrastructure and unifying USB and Bluetooth models - large update to ALPS driver by Hans de Goede, which adds support for newer touchpad models as well as cleans up and restructures the code - more changes to Atmel MXT driver, including device tree support - new driver for iPaq x3xxx touchscreen - driver for serial Wacom tablets - driver for Microchip's CAP1106 - assorted cleanups and improvements to existing drover and input core * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (93 commits) Input: wacom - update the ABI doc according to latest changes Input: wacom - only register once the MODULE_* macros Input: HID - remove hid-wacom Bluetooth driver Input: wacom - add copyright note and bump version to 2.0 Input: wacom - remove passing id for wacom_set_report Input: wacom - check for bluetooth protocol while setting OLEDs Input: wacom - handle Intuos 4 BT in wacom.ko Input: wacom - handle Graphire BT tablets in wacom.ko Input: wacom - prepare the driver to include BT devices Input: hyperv-keyboard - register as a wakeup source Input: imx_keypad - remove ifdef round PM methods Input: jornada720_ts - get rid of space indentation and use tab Input: jornada720_ts - switch to using managed resources Input: alps - Rushmore and v7 resolution support Input: mcs5000_ts - remove ifdef around power management methods Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEP Input: ads7846 - release resources on failure for clean exit Input: wacom - add support for 0x12C ISDv4 sensor Input: atmel_mxt_ts - use deep sleep mode when stopped ARM: dts: am437x-gp-evm: Update binding for touchscreen size ...
2014-08-06Merge branch 'next' into for-linusDmitry Torokhov
Prepare first round of input updates for 3.17.
2014-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcDavid S. Miller
Conflicts: arch/sparc/mm/init_64.c Conflict was simple non-overlapping additions. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-25Input: soc_button_array - add missing memory allocation checkPramod Gurav
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-21sparcspkr: use sbus_*() primitives for IOSam Ravnborg
The memory are mapped using of_ioremap() which is an indication this is sbus memory. Shift all uses of inb/outb to the sbus variants. The inb/outb methods uses ASI_PHYS_BYPASS_EC_E_L, whereas sbus_ variants uses ASI_PHYS_BYPASS_EC_E. The difference is if the reads/writes are done in native or little endian. But for byte reads/writes there is no difference so this does not matter for inb/outb - and this driver only uses the byte variants. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-21Input: uinput - add UI_GET_VERSION ioctlDavid Herrmann
This ioctl is the counterpart to EVIOCGVERSION and returns the uinput-version the kernel was compiled with. Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-21Input: uinput - uinput_validate_absbits() cleanupDavid Herrmann
This moves basic checks and setup from uinput_setup_device() into uinput_validate_absbits() to make it easier to use. This way, we can call it from other places without copying the boilerplate code. Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-18Input: keyspan_remote - remove unnecessary break after gotoFabian Frederick
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-18Input: sirfsoc-onkey - fix GPL v2 license string typoBjorn Helgaas
Per license_is_gpl_compatible(), the MODULE_LICENSE() string for GPL v2 is "GPL v2", not "GPLv2". Use "GPL v2" so this module doesn't taint the kernel. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-06-07Input: max8997_haptic - add error handling for regulator and pwmSachin Kamat
Let's start checking return value of regulator_enable and pwm_enable to avoid errors. Fixes the following warning: drivers/input/misc/max8997_haptic.c:185:19: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result [-Wunused-result] Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-29Input: ab8500-ponkey - switch to using managed resourcesHimangi Saraogi
Let's switch the driver to use managed resources, this will simplify error handling and driver unbinding logic. Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-29Input: max8925_onkey - switch to using managed resourcesHimangi Saraogi
Let's switch the driver to use managed resources, this will simplify error handling and driver unbinding logic. Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.51.0) at 2026-10-16 14:30:28 +0000