summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2023-11-29drm/bridge: anx7625: Fix Set HPD irq detect window to 2msXin Ji
Polling firmware HPD GPIO status, set HPD irq detect window to 2ms after firmware HPD GPIO initial done Signed-off-by: Xin Ji <xji@analogixsemi.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231120091038.284825-2-xji@analogixsemi.com
2023-11-29Revert "drm/bridge: Add 200ms delay to wait FW HPD status stable"Xin Ji
This reverts commit 330140d7319fcc4ec68bd924ea212e476bf12275 200ms delay will cause panel display image later than backlight turn on, revert this patch. Fixes: 330140d7319fcc ("drm/bridge: Add 200ms delay to wait FW HPD status stable") Signed-off-by: Xin Ji <xji@analogixsemi.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231120091038.284825-1-xji@analogixsemi.com
2023-11-29drm/i915/xe2lpd: remove the FBC restriction if PSR2 is enabledVinod Govindapillai
In earlier versions, FBC was restricted if PSR2 is enabled. From xe2lpd onwards no such restrictions are needed anymore. HSD: 14014305387 Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231110093225.39573-2-vinod.govindapillai@intel.com
2023-11-29drm/i915: Call intel_pre_plane_updates() also for pipes getting enabledVille Syrjälä
We used to call intel_pre_plane_updates() for any pipe going through a modeset whether the pipe was previously enabled or not. This in fact needed to apply all the necessary clock gating workarounds/etc. Restore the correct behaviour. Fixes: 39919997322f ("drm/i915: Disable all planes before modesetting any pipes") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-3-ville.syrjala@linux.intel.com (cherry picked from commit e0d5ce11ed0a21bb2bf328ad82fd261783c7ad88) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-11-29drm/i915: Also check for VGA converter in eDP probeVille Syrjälä
Unfortunately even the HPD based detection added in commit cfe5bdfb27fa ("drm/i915: Check HPD live state during eDP probe") fails to detect that the VBT's eDP/DDI-A is a ghost on Asus B360M-A (CFL+CNP). On that board eDP/DDI-A has its HPD asserted despite nothing being actually connected there :( The straps/fuses also indicate that the eDP port is present. So if one boots with a VGA monitor connected the eDP probe will mistake the DP->VGA converter hooked to DDI-E for an eDP panel on DDI-A. As a last resort check what kind of DP device we've detected, and if it looks like a DP->VGA converter then conclude that the eDP port should be ignored. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9636 Fixes: cfe5bdfb27fa ("drm/i915: Check HPD live state during eDP probe") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231114142333.15799-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit fcd479a79120bf0cd507d85f898297a3b868dda6) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-11-29drm/i915/gsc: Mark internal GSC engine with reserved uabi classTvrtko Ursulin
The GSC CS is not exposed to the user, so we skipped assigning a uabi class number for it. However, the trace logs use the uabi class and instance to identify the engine, so leaving uabi class unset makes the GSC CS show up as the RCS in those logs. Given that the engine is not exposed to the user, we can't add a new case in the uabi enum, so we insted internally define a kernel internal class as -1. At the same time remove special handling for the name and complete the uabi_classes array so internal class is automatically correctly assigned. Engine will show as 65535:0 other0 in the logs/traces which should be unique enough. v2: * Fix uabi class u8 vs u16 type confusion. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 194babe26bdc ("drm/i915/mtl: don't expose GSC command streamer to the user") Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116084456.291533-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit dfed6b58d54f3a5d7e6bc1fb060e2c936330eba2) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-11-29drm/loongson: Add platform dependencyJean Delvare
Only offer the Loongson DRM driver as an option on platforms where it makes sense. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Sui Jingfeng <sui.jingfeng@linux.dev> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev> Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev> Link: https://patchwork.freedesktop.org/patch/msgid/20231113125508.4dc755e8@endymion.delvare
2023-11-29nouveau/gsp: replace zero-length array with flex-array member and use ↵Gustavo A. R. Silva
__counted_by Fake flexible arrays (zero-length and one-element arrays) are deprecated, and should be replaced by flexible-array members. So, replace zero-length array with a flexible-array member in `struct PACKED_REGISTRY_TABLE`. Also annotate array `entries` with `__counted_by()` to prepare for the coming implementation by GCC and Clang of the `__counted_by` attribute. Flexible array members annotated with `__counted_by` can have their accesses bounds-checked at run-time via `CONFIG_UBSAN_BOUNDS` (for array indexing) and `CONFIG_FORTIFY_SOURCE` (for strcpy/memcpy-family functions). This fixes multiple -Warray-bounds warnings: drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1069:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1070:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1071:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1072:29: warning: array subscript 0 is outside array bounds of 'PACKED_REGISTRY_ENTRY[0]' [-Warray-bounds=] While there, also make use of the struct_size() helper, and address checkpatch.pl warning: WARNING: please, no spaces at the start of a line This results in no differences in binary output. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZVZbX7C5suLMiBf+@work
2023-11-29nouveau/gsp/r535: remove a stray unlock in r535_gsp_rpc_send()Dan Carpenter
This unlock doesn't belong here and it leads to a double unlock in the caller, r535_gsp_rpc_push(). Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Timur Tabi <ttabi@nvidia.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/a0293812-c05d-45f0-a535-3f24fe582c02@moroto.mountain
2023-11-29nouveau: find the smallest page allocation to cover a buffer alloc.Dave Airlie
With the new uapi we don't have the comp flags on the allocation, so we shouldn't be using the first size that works, we should be iterating until we get the correct one. This reduces allocations from 2MB to 64k in lots of places. Fixes dEQP-VK.memory.allocation.basic.size_8KiB.forward.count_4000 on my ampere/gsp system. Cc: stable@vger.kernel.org # v6.6 Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230811031520.248341-1-airlied@gmail.com
2023-11-28drm/bridge: ti-sn65dsi86: Simplify using pm_runtime_resume_and_get()Uwe Kleine-König
pm_runtime_resume_and_get() already drops the runtime PM usage counter in the error case. So a call to pm_runtime_put_sync() can be dropped. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231123175425.496956-2-u.kleine-koenig@pengutronix.de
2023-11-28drm/panel-edp: Avoid adding multiple preferred modesHsin-Yi Wang
If a non generic edp-panel is under aux-bus, the mode read from edid would still be selected as preferred and results in multiple preferred modes, which is ambiguous. If both hard-coded mode and edid exists, only add mode from hard-coded. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231117215056.1883314-4-hsinyi@chromium.org
2023-11-28drm/panel-edp: Add auo_b116xa3_modeHsin-Yi Wang
Add auo_b116xa3_mode to override the original modes parsed from edid of the panels 0x405c B116XAK01.0 and 0x615c B116XAN06.1 which result in glitches on panel. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231117215056.1883314-3-hsinyi@chromium.org
2023-11-28drm/panel-edp: Add override_edid_mode quirk for generic edpHsin-Yi Wang
Generic edp gets mode from edid. However, some panels report incorrect mode in this way, resulting in glitches on panel. Introduce a new quirk additional_mode to the generic edid to pick a correct hardcoded mode. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231117215056.1883314-2-hsinyi@chromium.org
2023-11-28drm/tilcdc: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. There is one error path in tilcdc_pdev_remove() that potentially could yield a non-zero return code. In this case an error message describing the failure is emitted now instead of remove callback returned a non-zero value. This will be ignored. before. Otherwise there is no difference. Also note that currently tilcdc_get_external_components() doesn't return negative values. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi> Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-34-u.kleine-koenig@pengutronix.de Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
2023-11-28drm/sched: Partial revert of "Qualify drm_sched_wakeup() by ↵Bert Karwatzki
drm_sched_entity_is_ready()" Commit f3123c2590005c, in combination with the use of work queues by the GPU scheduler, leads to random lock-ups of the GUI. This is a partial revert of of commit f3123c2590005c since drm_sched_wakeup() still needs its entity argument to pass it to drm_sched_can_queue(). Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2994 Link: https://lists.freedesktop.org/archives/dri-devel/2023-November/431606.html Signed-off-by: Bert Karwatzki <spasswolf@web.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231127160955.87879-1-spasswolf@web.de Link: https://lore.kernel.org/r/36bece178ff5dc705065e53d1e5e41f6db6d87e4.camel@web.de Fixes: f3123c2590005c ("drm/sched: Qualify drm_sched_wakeup() by drm_sched_entity_is_ready()") Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
2023-11-28drm/imagination: Numerous documentation fixes.Donald Robson
Some reported by Stephen Rothwell. The rest were found by running the kernel-doc build script. Some indentation fixes. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311241526.Y2WZeUau-lkp@intel.com/ Signed-off-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231128173507.95119-1-donald.robson@imgtec.com
2023-11-28drm/bridge: imx93-mipi-dsi: Fix a couple of building warningsLiu Ying
Fix a couple of building warnings on used uninitialized 'best_m' and 'best_n' local variables by initializing 'best_m' to zero and 'best_n' to UINT_MAX. This makes compiler happy only. No functional change. Fixes: ce62f8ea7e3f ("drm/bridge: imx: Add i.MX93 MIPI DSI support") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311151746.f7u7dzbZ-lkp@intel.com/ Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231123051807.3818342-1-victor.liu@nxp.com
2023-11-28drm/i915/dg2: Drop Wa_22014600077Matt Roper
This workaround has been dropped from all DG2 variants in the latest workaround database update. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127190043.4099109-2-matthew.d.roper@intel.com
2023-11-28drm/ast: Move detection code into PCI probe helperThomas Zimmermann
Detect device type and config mode in the PCI probe helper, but leave DRM device initialization where it is. Structures the driver probe and setup code into a detection and an initialization phase. A later patch can add branching to the device-initialization code. Each chip type can have it own initializer function, if necessary. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-11-tzimmermann@suse.de
2023-11-28drm/ast: Detect ast device type and config mode without ast deviceThomas Zimmermann
Return the ast chip and config in the detection function's parameters instead of storing them directly in the ast device instance. v2: * add break statements to switch default branches (Jocelyn) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-10-tzimmermann@suse.de
2023-11-28drm/ast: Add enum ast_config_modeThomas Zimmermann
The config mode used to be a field in struct ast_device. Turn it into a named type. We'll need this for device detection. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-9-tzimmermann@suse.de
2023-11-28drm/ast: Partially implement POST without ast device instanceThomas Zimmermann
We'll have to do some of the GPU POSTing for detecting the ast device type. Make this work without an instance of the ast device. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-8-tzimmermann@suse.de
2023-11-28drm/ast: Enable MMIO without ast device instanceThomas Zimmermann
We'll have to enable the MMIO access for detecting the ast device type. Make this work without an instance of the ast device. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-7-tzimmermann@suse.de
2023-11-28drm/ast: Enable VGA without ast device instanceThomas Zimmermann
We'll have to enable the VGA functionality for detecting the ast device type. Make this work without an instance of the ast device. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-6-tzimmermann@suse.de
2023-11-28drm/ast: Add I/O helpers without ast deviceThomas Zimmermann
Implement I/O access in helpers that do not use an ast device instance, but the raw pointer to the I/O memory. We'll later need these helpers to detect the device type before allocating the ast device instance. v3: * fix typo in commit message (Sui) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-5-tzimmermann@suse.de
2023-11-28drm/ast: Retrieve I/O-memory ranges without ast deviceThomas Zimmermann
Read the I/O-memory ranges into local variables before setting them in the ast device instanace. We'll later need this to split detecting the device type from the creation of the ast device instance. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-4-tzimmermann@suse.de
2023-11-28drm/ast: Rework I/O register setupThomas Zimmermann
There are three different ways of retrieving the I/O-memory ranges for AST devices: either from PCI BAR 1, from PCI BAR 2 or from PCI BAR 1 by 'guessing'. Make the respective code more readable by making each case self- contained. Also add error checking against the length of the PCI BARs. v2: * fix I/O range length to 128 bytes * fix length test for PCI BAR 2 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-3-tzimmermann@suse.de
2023-11-28drm/ast: Turn ioregs_lock to modeset_lockThomas Zimmermann
The lock for the I/O registers is only relevant during mode-setting operations. It protects the registers from concurrent access from reading EDID information. Reduce lock coverage to mode setting, rename the lock and move it entirely into the mode-setting code. No functional changes, as the I/O lock was never used for anything else than mode setting. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-2-tzimmermann@suse.de
2023-11-28Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to get commit 8d6ef26501b9 ("drm/ast: Disconnect BMC if physical connector is connected") into drm-misc-next. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2023-11-28eventfd: simplify eventfd_signal()Christian Brauner
Ever since the eventfd type was introduced back in 2007 in commit e1ad7468c77d ("signal/timer/event: eventfd core") the eventfd_signal() function only ever passed 1 as a value for @n. There's no point in keeping that additional argument. Link: https://lore.kernel.org/r/20231122-vfs-eventfd-signal-v2-2-bd549b14ce0c@kernel.org Acked-by: Xu Yilun <yilun.xu@intel.com> Acked-by: Andrew Donnellan <ajd@linux.ibm.com> # ocxl Acked-by: Eric Farman <farman@linux.ibm.com> # s390 Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-28drm/imagination: vm: fix drm_gpuvm reference countDanilo Krummrich
The driver specific reference count indicates whether the VM should be teared down, whereas GPUVM's reference count indicates whether the VM structure can finally be freed. Hence, free the VM structure in pvr_gpuvm_free() and drop the last GPUVM reference after tearing down the VM. Generally, this prevents lifetime issues such as the VM being freed as long as drm_gpuvm_bo structures still hold references to the VM. Fixes: ff5f643de0bf ("drm/imagination: Add GEM and VM related code") Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Donald Robson <donald.robson@imgtec.com> Tested-by: Frank Binns <frank.binns@imgtec.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231124233650.152653-4-dakr@redhat.com
2023-11-28drm/imagination: vm: check for drm_gpuvm_range_valid()Danilo Krummrich
Extend pvr_device_addr_and_size_are_valid() by the corresponding GPUVM sanity checks. This includes a, previously missing, overflow check for the base address and size of the requested mapping. Fixes: ff5f643de0bf ("drm/imagination: Add GEM and VM related code") Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Donald Robson <donald.robson@imgtec.com> Tested-by: Frank Binns <frank.binns@imgtec.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231124233650.152653-3-dakr@redhat.com
2023-11-28drm/imagination: vm: prevent duplicate drm_gpuvm_bo instancesDanilo Krummrich
Use drm_gpuvm_bo_obtain() instead of drm_gpuvm_bo_create(). The latter should only be used in conjunction with drm_gpuvm_bo_obtain_prealloc(). drm_gpuvm_bo_obtain() re-uses existing instances of a given VM and BO combination, whereas drm_gpuvm_bo_create() would always create a new instance of struct drm_gpuvm_bo and hence leave us with duplicates. Fixes: ff5f643de0bf ("drm/imagination: Add GEM and VM related code") Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Donald Robson <donald.robson@imgtec.com> Tested-by: Frank Binns <frank.binns@imgtec.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231124233650.152653-2-dakr@redhat.com
2023-11-28drm/imagination: Remove unneeded semicolonYang Li
./drivers/gpu/drm/imagination/pvr_free_list.c:258:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7635 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Frank Binns <frank.binns@imgtec.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231127010430.119666-1-yang.lee@linux.alibaba.com
2023-11-28drm/imagination: Fix a couple of spelling mistakes in literal stringsColin Ian King
There are a couple of spelling mistakes in literal strings in the stid_fmts array. Fix these. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Frank Binns <frank.binns@imgtec.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231124163917.300685-1-colin.i.king@gmail.com
2023-11-28Merge v6.7-rc3 into drm-nextDaniel Vetter
Thomas Zimermann needs 8d6ef26501 ("drm/ast: Disconnect BMC if physical connector is connected") for further ast work in -next. Minor conflicts in ivpu between 3de6d9597892 ("accel/ivpu: Pass D0i3 residency time to the VPU firmware") and 3f7c0634926d ("accel/ivpu/37xx: Fix hangs related to MMIO reset") changing adjacent lines. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2023-11-28drm/gpuvm: Fix deprecated license identifierThomas Hellström
"GPL-2.0-only" in the license header was incorrectly changed to the now deprecated "GPL-2.0". Fix. Cc: Maxime Ripard <mripard@kernel.org> Cc: Danilo Krummrich <dakr@redhat.com> Reported-by: David Edelsohn <dje.gcc@gmail.com> Closes: https://lore.kernel.org/dri-devel/5lfrhdpkwhpgzipgngojs3tyqfqbesifzu5nf4l5q3nhfdhcf2@25nmiq7tfrew/T/#m5c356d68815711eea30dd94cc6f7ea8cd4344fe3 Fixes: f7749a549b4f ("drm/gpuvm: Dual-licence the drm_gpuvm code GPL-2.0 OR MIT") Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231106114827.62492-1-thomas.hellstrom@linux.intel.com
2023-11-28Revert "drm/bridge: panel: Add a device link between drm device and panel ↵Linus Walleij
device" This reverts commit 199cf07ebd2b0d41185ac79b895547d45610b681. This patch creates bugs on devices where the DRM device is the ancestor of the panel devices. Attempts to fix this have failed because it leads to using device core functionality which is questionable. Reported-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/ Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231128-revert-panel-fix-v1-3-69bb05048dae@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231128-revert-panel-fix-v1-3-69bb05048dae@linaro.org
2023-11-28Revert "drm/bridge: panel: Check device dependency before managing device link"Linus Walleij
This reverts commit 39d5b6a64ace77d0c11c398d272218df5f939abb. This patch was causing build errors by using an unexported function from the device core, which Greg questions the saneness in exporting. Link: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/ Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231128-revert-panel-fix-v1-2-69bb05048dae@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231128-revert-panel-fix-v1-2-69bb05048dae@linaro.org
2023-11-27drm: Use device_get_match_data()Rob Herring
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data in a single step. With this, adjust the includes to explicitly include the correct headers. That also serves as preparation to remove implicit includes within the DT headers (of_device.h in particular). Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Link: https://lore.kernel.org/r/20231020125214.2930329-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-11-27drm/sched: Fix compilation issues with DRM priority renameLuben Tuikov
Fix compilation issues with DRM scheduler priority rename MIN to LOW. Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311252109.WgbJsSkG-lkp@intel.com/ Cc: Danilo Krummrich <dakr@redhat.com> Cc: Frank Binns <frank.binns@imgtec.com> Cc: Donald Robson <donald.robson@imgtec.com> Cc: Matt Coster <matt.coster@imgtec.com> Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org> Fixes: fe375c74806dbd ("drm/sched: Rename priority MIN to LOW") Fixes: 38f922a563aac3 ("drm/sched: Reverse run-queue priority enumeration") Fixes: 5f03a507b29e44 ("drm/nouveau: implement 1:1 scheduler - entity relationship") Link: https://patchwork.freedesktop.org/patch/msgid/20231125192246.87268-2-ltuikov89@gmail.com Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/7429262c-6dea-4dcc-bf7e-54d2277dabf1@amd.com
2023-11-27drm/ttm: Schedule delayed_delete worker closerRajneesh Bhardwaj
Try to allocate system memory on the NUMA node the device is closest to and try to run delayed_delete workers on a CPU of this node as well. To optimize the memory clearing operation when a TTM BO gets freed by the delayed_delete worker, scheduling it closer to a NUMA node where the memory was initially allocated helps avoid the cases where the worker gets randomly scheduled on the CPU cores that are across interconnect boundaries such as xGMI, PCIe etc. This change helps USWC GTT allocations on NUMA systems (dGPU) and AMD APU platforms such as GFXIP9.4.3. Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231111130856.1168304-1-rajneesh.bhardwaj@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>
2023-11-27drm/i915/psr: Add proper handling for disabling sel fetch for planesJouni Högander
Currently we are enabling selective fetch for all planes that are visible. This is suboptimal as we might be fetching for memory for planes that are not part of selective update. Fix this by adding proper handling for disabling plane selective fetch: If plane previously part of selective update is now not part of update: Add it into updated planes and let the plane configuration to disable selective fetch for it. v3: Checkpatch warnings fixed v2: - Add setting sel_fetch_area->y1/y2 to -1 - Remove setting again local sel_fetch_area variable Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231120082606.3156488-3-jouni.hogander@intel.com
2023-11-27drm/i915/psr: Move plane sel fetch configuration into plane source filesJouni Högander
Currently selective fetch configuration for planes is implemented in psr code. More suitable place for this code is where everything else is configured for planes -> move it into skl_universal_plane.c and intel_cursor.c. This also allows us to drop hooks for cursor handling. v3: Checkpatch warnings fixed v2: Removed setting sel_fetch_area->y1/y2 as -1 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231120082606.3156488-2-jouni.hogander@intel.com
2023-11-26drm/mediatek: Add spinlock for setting vblank event in atomic_beginJason-JH.Lin
Add spinlock protection to avoid race condition on vblank event between mtk_drm_crtc_atomic_begin() and mtk_drm_finish_page_flip(). Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Reviewed-by: Fei Shao <fshao@chromium.org> Tested-by: Fei Shao <fshao@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/20230920090658.31181-1-jason-jh.lin@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2023-11-25drm/msm/a690: Fix reg values for a690Danylo Piliaiev
KGSL doesn't support a690 so all reg values were the same as on a660. Now we know the values and they are different from the windows driver. This fixes hangs on D3D12 games and some CTS tests. Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com> Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/568931/
2023-11-25drm/msm/a6xx: Add missing BIT(7) to REG_A6XX_UCHE_CLIENT_PFDanylo Piliaiev
Downstream always set BIT(7) Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com> Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/568930/
2023-11-24drm/sched: Reverse run-queue priority enumerationLuben Tuikov
Reverse run-queue priority enumeration such that the higest priority is now 0, and for each consecutive integer the prioirty diminishes. Run-queues correspond to priorities. To an external observer a scheduler created with a single run-queue, and another created with DRM_SCHED_PRIORITY_COUNT number of run-queues, should always schedule sched->sched_rq[0] with the same "priority", as that index run-queue exists in both schedulers, i.e. a scheduler with one run-queue or many. This patch makes it so. In other words, the "priority" of sched->sched_rq[n], n >= 0, is the same for any scheduler created with any allowable number of run-queues (priorities), 0 to DRM_SCHED_PRIORITY_COUNT. Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Danilo Krummrich <dakr@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231124052752.6915-6-ltuikov89@gmail.com
2023-11-24drm/sched: Rename priority MIN to LOWLuben Tuikov
Rename DRM_SCHED_PRIORITY_MIN to DRM_SCHED_PRIORITY_LOW. This mirrors DRM_SCHED_PRIORITY_HIGH, for a list of DRM scheduler priorities in ascending order, DRM_SCHED_PRIORITY_LOW, DRM_SCHED_PRIORITY_NORMAL, DRM_SCHED_PRIORITY_HIGH, DRM_SCHED_PRIORITY_KERNEL. Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Danilo Krummrich <dakr@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231124052752.6915-5-ltuikov89@gmail.com
generated by cgit v1.2.3 (git 2.51.0) at 2026-11-11 14:25:54 +0000