| Age | Commit message (Collapse) | Author |
|---|
|
https://anongit.freedesktop.org/git/drm/drm-misc into drm-next
drm-misc-next for v6.9:
UAPI Changes:
Cross-subsystem Changes:
backlight:
- corgi: include backlight header
fbdev:
- Cleanup includes in public header file
- fbtft: Include backlight header
Core Changes:
edid:
- Remove built-in EDID data
dp:
- Avoid AUX transfers on powered-down displays
- Add VSC SDP helpers
modesetting:
- Add sanity checks for polling
- Cleanups
scheduler:
- Cleanups
tests:
- Add helpers for mode-setting tests
Driver Changes:
i915:
- Use shared VSC SDP helper
mgag200:
- Work around PCI write bursts
mxsfb:
- Use managed mode config
nouveau:
- Include backlight header where necessary
qiac:
- Cleanups
sun4:
- HDMI: updates to atomic mode setting
tegra:
- Fix GEM refounting in error paths
tidss:
- Fix multi display
- Fix initial Z position
v3d:
- Support display MMU page size
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229084806.GA21616@localhost.localdomain
|
|
Nouveau deallocates a few buffers post GPU init which are required for GPU suspend/resume to function correctly.
This is likely not as big an issue on systems where the NVGPU is the only GPU, but on multi-GPU set ups it leads to a regression where the kernel module errors and results in a system-wide rendering freeze.
This commit addresses that regression by moving the two buffers required for suspend and resume to be deallocated at driver unload instead of post init.
Fixes: 042b5f83841fb ("drm/nouveau: fix several DMA buffer leaks")
Signed-off-by: Sid Pranjale <sidpranjale127@protonmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Turns out usage is always in bytes not shifted.
Fixes: 72fa02fdf833 ("nouveau: add an ioctl to report vram usage")
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.8-2024-02-29:
amdgpu:
- Fix potential buffer overflow
- Fix power min cap
- Suspend/resume fix
- SI PM fix
- eDP fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229152424.6646-1-alexander.deucher@amd.com
|
|
LNCFCMOCS31[31:16] is read-only for DG2 and MTL, so it's not possible to
check set it. While trying to set doesn't cause any issue, later when
it's read back to check if the value got correctly recorded causes the
test to fail. Now that test is reliable for an odd number of entries,
reduce it so the last entry is ignored.
Bspec: 55267
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1253
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1233
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228061048.3661978-6-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Refactor the mocs/l3cc kunit test to support odd number of entries. This
switches out from the "check the register value" approach to check the
entry value if it makes sense from the register read. This provides an
easier output to reason about and cross check with bspec.
Some code reordering and variable re-use was also done so the 2
functions follow more or less the same logic.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228061048.3661978-5-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The warn-once in __init_mocs_table() to make sure there's an index set
for unused entries is more a sanity check that should be done as the
first thing in that function. The kunit test replicates the same check,
so also move it up and turn it into a failure condition for the test.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228061048.3661978-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Make sure to log if number of entries are l3cc or mocs so it doesn't
depend on the context.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228061048.3661978-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
There's no reason to keep the assignment an condition in the same
statement, particularly making use of the comma operator. Improve
readability by doing each step on its own statement. This will make
supporting odd number of entries more easily.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228061048.3661978-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.8-rc7
DP:
- Revert a change which was causing a HDP regression
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvhWvHiPGQ1pRD2XPAQoHEM2M35kjhrsSAEtzh8AMSRvg@mail.gmail.com
|
|
Need to include io-64-nonatomic-lo-hi.h for writeq function.
Commit 3121fed0c51b ("drm/xe: Cleanup some layering in GGTT")
removed the xe_mmio.h include so lost the indirect include. Add it
where it's needed.
Fixes: 3121fed0c51b ("drm/xe: Cleanup some layering in GGTT")
Closes: https://lore.kernel.org/oe-kbuild-all/202402241903.R5J8hKVI-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225001448.81513-1-matthew.brost@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- A couple of tracepoint updates from Priyanka and Lucas.
- Make sure BINDs are completed before accepting UNBINDs on LR vms.
- Don't arbitrarily restrict max number of batched binds.
- Add uapi for dumpable bos (agreed on IRC).
- Remove unused uapi flags and a leftover comment.
Driver Changes:
- A couple of fixes related to the execlist backend.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZeCBg4MA2hd1oggN@fedora
|
|
https://anongit.freedesktop.org/git/drm/drm-misc into drm-fixes
A reset fix for host1x, a resource leak fix and a probe fix for aux-hpd,
a use-after-free fix and a boot fix for a pmic_glink qcom driver in
drivers/soc, a fix for the simpledrm/tegra transition, a kunit fix for
the TTM tests, a font handling fix for fbcon, two allocation fixes and a
kunit test to cover them for drm/buddy
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229-angelic-adorable-teal-fbfabb@houat
|
|
After 4020c2280233 ("drm/amdgpu: don't runtime suspend if there are
displays attached (v3)"), "ret" is unconditionally set later before being
used, so there's point in initializing it and the associated comment is no
longer meaningful.
Remove the comment and the unnecessary initialization.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 11b92df8a2f7f4605ccc764ce6ae4a72760674df.
This conflicts with how compositors want to handle VRR. Now
that compositors actually handle VRR, we probably don't need
freesync video.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2985
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit e94e787e37b99645e7c02d20d0a1ba0f8a18a82a.
This conflicts with how compositors want to handle VRR. Now
that compositors actually handle VRR, we probably don't need
freesync video.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2985
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:6683 amdgpu_dm_connector_funcs_force()
warn: variable dereferenced before check 'dc_link' (see line 6663)
Fixes: 967176179215 ("drm/amd/display: fix null-pointer dereference on edid reading")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Both RAS UE and deferred errors need page retirement.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add an if condition for gfx activity because the scaling has been changed after smu fw version 5d4600.
And remove a warning log.
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Driver Changes:
Fixes:
- Add some boring kerneldoc (Tvrtko Ursulin)
- Check before removing mm notifier (Nirmoy
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zd889Wvu/ZKZSK4/@tursulin-desk
|
|
The LRCs on some of our newer platforms appear to contain a few GPU
instructions that weren't handled in our LRC parser. Add the relevant
instruction names and opcodes so that our debugfs LRC dumps will
properly indicate what these are.
Bspec: 55866, 64848, 46931
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222184009.6857-2-matthew.d.roper@intel.com
|
|
Just return the correct thing from within the loop to make
the code more readable. We have no ref counts/etc. to deal
with here so no point in breaking from the loop just to return
something.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223203216.15210-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
The icl+ power well code currently assumes that every AUX power
well maps to an encoder which is using said power well. That is
by no menas guaranteed as we:
- only register encoders for ports declared in the VBT
- combo PHY HDMI-only encoder no longer get an AUX CH since
commit 9856308c94ca ("drm/i915: Only populate aux_ch if really needed")
However we have places such as intel_power_domains_sanitize_state()
that blindly traverse all the possible power wells. So these bits
of code may very well encounbter an aux power well with no associated
encoder.
In this particular case the BIOS seems to have left one AUX power
well enabled even though we're dealing with a HDMI only encoder
on a combo PHY. We then proceed to turn off said power well and
explode when we can't find a matching encoder. As a short term fix
we should be able to just skip the PHY related parts of the power
well programming since we know this situation can only happen with
combo PHYs.
Another option might be to go back to always picking an AUX CH for
all encoders. However I'm a bit wary about that since we might in
theory end up conflicting with the VBT AUX CH assignment. Also
that wouldn't help with encoders not declared in the VBT, should
we ever need to poke the corresponding power wells.
Longer term we need to figure out what the actual relationship
is between the PHY vs. AUX CH vs. AUX power well. Currently this
is entirely unclear.
Cc: stable@vger.kernel.org
Fixes: 9856308c94ca ("drm/i915: Only populate aux_ch if really needed")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10184
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223203216.15210-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
It's possible that mtk_crtc->event is NULL in
mtk_drm_crtc_finish_page_flip().
pending_needs_vblank value is set by mtk_crtc->event, but in
mtk_drm_crtc_atomic_flush(), it's is not guarded by the same
lock in mtk_drm_finish_page_flip(), thus a race condition happens.
Consider the following case:
CPU1 CPU2
step 1:
mtk_drm_crtc_atomic_begin()
mtk_crtc->event is not null,
step 1:
mtk_drm_crtc_atomic_flush:
mtk_drm_crtc_update_config(
!!mtk_crtc->event)
step 2:
mtk_crtc_ddp_irq ->
mtk_drm_finish_page_flip:
lock
mtk_crtc->event set to null,
pending_needs_vblank set to false
unlock
pending_needs_vblank set to true,
step 2:
mtk_crtc_ddp_irq ->
mtk_drm_finish_page_flip called again,
pending_needs_vblank is still true
//null pointer
Instead of guarding the entire mtk_drm_crtc_atomic_flush(), it's more
efficient to just check if mtk_crtc->event is null before use.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240223212404.3709690-1-hsinyi@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
When sync binds were reworked and worker removed, async_ops became
obsolete. Remove it.
Fixes: f3e9b1f43458 ("drm/xe: Remove async worker and rework sync binds")
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117110908.2362615-1-mika.kuoppala@linux.intel.com
|
|
intel_backlight_device_register()
'name' may still be "intel_backlight" when backlight_device_register()
is called. In such a case, using kstrdup_const() saves a memory
duplication when dev_set_name() is called in
backlight_device_register().
Use kfree_const() accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ecfdb3af5005e05131e2fb93fd870830f39a8c29.1708708142.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add a function to return the expected child device size. Flip the if
ladder around and use the same versions as in documentation to make it
easier to verify. Return an error for unknown versions. No functional
changes.
v2: Move BUILD_BUG_ON() next to the expected sizes
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226175854.287871-3-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Separate the child device size check to a separate function for
clarity. No functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226175854.287871-2-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
VBT versions since 256 have an extra byte for EFP index.
v2: Update BUILD_BUG_ON() (Matt)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226175854.287871-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Error in mmu_interval_notifier_insert() can leave a NULL
notifier.mm pointer. Catch that and return early.
Fixes: ed29c2691188 ("drm/i915: Fix userptr so we do not have to worry about obj->mm.lock, v7.")
Cc: <stable@vger.kernel.org> # v5.13+
[tursulin: Added Fixes and cc stable.]
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Shawn Lee <shawn.c.lee@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219125047.28906-1-nirmoy.das@intel.com
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit db7bbd13f08774cde0332c705f042e327fe21e73)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Add move_lacks_source detail to xe_bo_move trace to make it readable
that is to check if it is migrate clear or migrate copy.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Priyanka Dandamudi <priyanka.dandamudi@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: a09946a9a903 ("drm/xe/xe_bo_move: Enhance xe_bo_move trace")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221101950.1019312-1-priyanka.dandamudi@intel.com
(cherry picked from commit 8034f6b070cc3716e81b1846f8a4ca5339c3f29b)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Add move_lacks_source detail to xe_bo_move trace to make it readable
that is to check if it is migrate clear or migrate copy.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Priyanka Dandamudi <priyanka.dandamudi@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: a0df2cc858c3 ("drm/xe/xe_bo_move: Enhance xe_bo_move trace")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221101950.1019312-1-priyanka.dandamudi@intel.com
|
|
Sync to get the drm_printer changes to drm-intel-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Assert DisplayPort reset signal before deasserting,
it is to clear out any registers programmed before booting kernel.
Signed-off-by: Rohit Visavalia <rohit.visavalia@amd.com>
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216124043.1226713-1-rohit.visavalia@amd.com
|
|
If user fence was provided for MAP in vm_bind_ioctl
and it has still not been signalled, deny UNMAP of said
vma with EBUSY as long as unsignalled fence exists.
This guarantees that MAP vs UNMAP sequences won't
escape under the radar if we ever want to track the
client's state wrt to completed and accessible MAPs.
By means of intercepting the ufence release signalling.
v2: find ufence with num_fences > 1 (Matt)
v3: careful on clearing vma ufence (Matt)
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1159
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240215181152.450082-3-mika.kuoppala@linux.intel.com
(cherry picked from commit 158900ade92cce5ab85a06d618eb51e6c7ffb28a)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
By allowing getting reference to user fence, we can
control the lifetime outside of sync entries.
This is needed to allow vma to track the associated
user fence that was provided with bind ioctl.
v2: xe_user_fence can be kept opaque (Jani, Matt)
v3: indent fix (Matt)
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240215181152.450082-2-mika.kuoppala@linux.intel.com
(cherry picked from commit 977e5b82e0901480bc201342d39f855fc0a2ef47)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Commit a0df2cc858c3 ("drm/xe/xe_bo_move: Enhance xe_bo_move trace")
inadvertently reverted commit 8d038f49c1f3 ("drm/xe: Fix cast on trace
variable"), breaking the build on 32bits.
As noted by Ville, there's no point in converting the pointers to u64
and add casts everywhere. In fact, it's better to just use %p and let
the address be hashed. Convert all the cases in xe_trace.h to use
pointers.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Priyanka Dandamudi <priyanka.dandamudi@intel.com>
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222144125.2862546-1-lucas.demarchi@intel.com
(cherry picked from commit 7a975748d4dc0a524c99a390c6f74b7097ef8cf7)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Enhanced xe_bo_move trace to be more readable.
It will help to show the migration details.
Src and dst details.
v2: Modify trace_xe_bo_move(), it takes the integer mem_type
rather than a string.
Make mem_type_to_name() extern, it will be used by trace.(Thomas)
v3: Move mem_type_to_name() to xe_bo.[ch] (Thomas, Matt)
v4: Add device details to reduce ambiquity related to vram0/vram1. (Oak)
v5: Rename mem_type_to_name to xe_mem_type_to_name. (Thomas)
v6: Optimised code to use xe_bo_device(__entry->bo). (Thomas)
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: Kempczynski Zbigniew <Zbigniew.Kempczynski@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Brian Welty <brian.welty@intel.com>
Signed-off-by: Priyanka Dandamudi <priyanka.dandamudi@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220044748.948496-1-priyanka.dandamudi@intel.com
(cherry picked from commit a0df2cc858c309a8bc2e87b4274772587aa25e05)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
clang complains about a nonsensical test on builds with a 32-bit phys_addr_t,
which means resizing will always fail:
drivers/gpu/drm/xe/xe_mmio.c:109:23: error: result of comparison of constant 4294967296 with expression of type 'resource_size_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
109 | root_res->start > 0x100000000ull)
| ~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
Previously, BAR resize was always disallowed on 32-bit kernels, but
this apparently changed recently. Since 32-bit machines can in theory
support PAE/LPAE for large address spaces, this may end up useful,
so change the driver to shut up the warning but still work when
phys_addr_t/resource_size_t is 64 bit wide.
Fixes: 9a6e6c14bfde ("drm/xe/mmio: Use non-atomic writeq/readq variant for 32b")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226124736.1272949-2-arnd@kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit f5d3983366c0b88ec388b3407b29c1c0862ee2b8)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Mesa has been issuing a single bind operation per ioctl since xe.ko
changed to GPUVA due xe.ko bug #746. If I change Mesa to try again to
issue every single bind operation it can in the same ioctl, it hits
the MAX_BINDS assertion when running Vulkan conformance tests.
Test dEQP-VK.sparse_resources.transfer_queue.3d.rgba32i.1024_128_8
issues 960 bind operations in a single ioctl, it's the most I could
find in the conformance suite.
I don't see a reason to keep the MAX_BINDS restriction: it doesn't
seem to be preventing any specific issue. If the number is too big for
the memory allocations, then those will fail. Nothing related to
num_binds seems to be using the stack. Let's just get rid of it.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Testcase: dEQP-VK.sparse_resources.transfer_queue.3d.rgba32i.1024_128_8
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/746
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240215005353.1295420-1-paulo.r.zanoni@intel.com
(cherry picked from commit ba6bbdc6eaef92998ec7f323c9e1211d344d2556)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Use vmalloc in effort to allow a user pass in a large number of binds in
an IOCTL (mesa use case). Also use array allocations rather open coding
the size calculation.
v2: Use __GFP_ACCOUNT for allocations (Thomas)
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226155554.103384-1-matthew.brost@intel.com
(cherry picked from commit 35ed1d2bfff7b1969e7f99f3641a83ea54f037e2)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The xe_gt_tlb_invalidation layer implements TLB invalidations for a GuC
backend. Simply return if in execlists mode. A follow up may properly
implement the xe_gt_tlb_invalidation layer for both GuC and execlists.
Fixes: a9351846d945 ("drm/xe: Break of TLB invalidation into its own file")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222232021.3911545-4-matthew.brost@intel.com
(cherry picked from commit a9e483dda3efa5b9aae5d9eef94d2c3a878d9bea)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Although execlist submission is not supported it should be kept in a
basic working state as it can be used for very early hardware bring up.
Fix the below splat.
WARNING: CPU: 3 PID: 11 at drivers/gpu/drm/xe/xe_execlist.c:217 execlist_run_job+0x1c2/0x220 [xe]
Modules linked in: xe drm_kunit_helpers drm_gpuvm drm_ttm_helper ttm drm_exec drm_suballoc_helper drm_buddy gpu_sched mei_pxp mei_hdcp wmi_bmof x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul snd_hda_intel ghash_clmulni_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core video snd_pcm mei_me mei wmi fuse e1000e i2c_i801 ptp i2c_smbus pps_core intel_lpss_pci
CPU: 3 PID: 11 Comm: kworker/u16:0 Tainted: G U 6.8.0-rc3-guc+ #1046
Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWI1.R00.3243.A01.2006102133 06/10/2020
Workqueue: rcs0 drm_sched_run_job_work [gpu_sched]
RIP: 0010:execlist_run_job+0x1c2/0x220 [xe]
Code: 8b f8 03 00 00 4c 89 39 e9 e2 fe ff ff 49 8d 7d 20 be ff ff ff ff e8 ed fd a6 e1 85 c0 0f 85 e1 fe ff ff 0f 0b e9 da fe ff ff <0f> 0b 0f 0b 41 83 fc 03 0f 86 8a fe ff ff 0f 0b e9 83 fe ff ff be
RSP: 0018:ffffc9000013bdb8 EFLAGS: 00010246
RAX: ffff888105021a00 RBX: ffff888105078400 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffc9000013bd14 RDI: ffffc90001609090
RBP: ffff88811e3f0040 R08: 0000000000000088 R09: 00000000ffffff81
R10: 0000000000000001 R11: ffff88810c10c000 R12: 00000000fffffffe
R13: ffff888109b72c28 R14: ffff8881050784a0 R15: ffff888105078408
FS: 0000000000000000(0000) GS:ffff88849f980000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000563459d130f8 CR3: 000000000563a001 CR4: 0000000000f70ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0x7f/0x170
? execlist_run_job+0x1c2/0x220 [xe]
? report_bug+0x1c7/0x1d0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? execlist_run_job+0x1c2/0x220 [xe]
? execlist_run_job+0x2c/0x220 [xe]
drm_sched_run_job_work+0x246/0x3f0 [gpu_sched]
? process_one_work+0x18d/0x4e0
process_one_work+0x1f7/0x4e0
worker_thread+0x1da/0x3e0
? __pfx_worker_thread+0x10/0x10
kthread+0xfe/0x130
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Fixes: 9b9529ce379a ("drm/xe: Rename engine to exec_queue")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222232021.3911545-2-matthew.brost@intel.com
(cherry picked from commit ddadc7120d4be7a40a9745924339c472c5850d14)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Those cases missed in previous uAPI cleanups were mostly accidentally
brought in from i915 or created to exercise the possibilities of gpuvm
but they are not used by userspace yet, so let's remove them. They can
still be brought back later if needed.
v2:
- Fix XE_VM_FLAG_FAULT_MODE support in xe_lrc.c (Brian Welty)
- Leave DRM_XE_VM_BIND_OP_UNMAP_ALL (José Roberto de Souza)
- Ensure invalid flag values are rejected (Rodrigo Vivi)
v3: Rebase after removal of persistent exec_queues (Francois Dugast)
v4: Rodrigo: Rebase after the new dumpable flag.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222232356.175431-1-rodrigo.vivi@intel.com
(cherry picked from commit 84a1ed5e67565b09b8fd22a26754d2897de55ce0)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The S6E3FA7 display controller is enabled in every Pixel 3a (non-XL)
variant. Add the driver for it, generated by
linux-mdss-dsi-panel-driver-generator.
There are other panels connected to the same S6E3FA7 display controller,
such as the AMS604NL01 panel, which are incompatible with this driver.
Name the device tree compatible after the panel model according to
iFixit.
Link: https://github.com/msm8916-mainline/linux-mdss-dsi-panel-driver-generator
Link: https://android.googlesource.com/kernel/msm/+/7fda1cd7b64710dafac5f34899611c6d35eb4cd2/arch/arm64/boot/dts/google/dsi-panel-s6e3fa7-1080p-cmd.dtsi
Link: https://github.com/msm8953-mainline/linux/blob/v6.6.12-r0/drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c
Link: https://www.ifixit.com/Guide/Image/meta/muyjtLQTHu6MDkhK
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240209001639.387374-8-mailingradian@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add the flag XE_VM_BIND_FLAG_DUMPABLE to notify devcoredump that this
mapping should be dumped.
This is not hooked up, but the uapi should be ready before merging.
It's likely easier to dump the contents of the bo's at devcoredump
readout time, so it's better if the bos will stay unmodified after
a hang. The NEEDS_CPU_MAPPING flag is removed as requirement.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221133024.898315-3-maarten.lankhorst@linux.intel.com
(cherry picked from commit 76a86b58d2b3de31e88acb487ebfa0c3cc7c41d2)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
init_steering_dss need topology dss mask to be init ahead.
Fixed by moving xe_gt_topology_init ahead of xe_gt_mcr_init
Fixes: bf8ec3c3e82c ("drm/xe: Initialize GuC earlier during probe")
Cc: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240227164922.281346-2-zhanjun.dong@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
[WHY]
Some eDP panels' ext caps don't write initial values. The value of
dpcd_addr (0x317) can be random and the backlight control interface
will be incorrect.
[HOW]
Add new panel patches to remove sink ext caps.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.5.x
Cc: Tsung-hua Lin <tsung-hua.lin@amd.com>
Cc: Chris Chi <moukong.chi@amd.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The adev can be found from bo by amdgpu_ttm_adev(bo->tbo.bdev),
and adev is also not used in the function
amdgpu_amdkfd_map_gtt_bo_to_gart().
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix mask used for esm ctrl register to get pcie link
speed on smu_v11_0_3, smu_v13_0_2 & smu_v13_0_6
Fixes: 511a95552ec8 ("drm/amd/pm: Add SMU 13.0.6 support")
Fixes: c05d1c401572 ("drm/amd/swsmu: add aldebaran smu13 ip support (v3)")
Fixes: f1c378593153 ("drm/amd/powerplay: add Arcturus support for gpu metrics export")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
