| Age | Commit message (Collapse) | Author |
|---|
|
This is part of the reset, move it into the reset function.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdxcp is a platform driver for creating partition devices. libdrm
library identifies a platform device based on 'OF_FULLNAME' or
'MODALIAS'. If two or more devices have the same platform name, drm
library only picks the first device. Platform driver core uses name of
the device to populate 'MODALIAS'. When 'amdgpu_xcp' is used as the base
name, only first partition device gets identified. Assign unique name so
that drm library identifies partition devices separately.
amdxcp doesn't support probe of partitions, it doesn't bother about
modaliases.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some version of BIOS does not enable all clock levels,
resulting in high level clock frequency of 0.
The number of valid CLKs must be confirmed in advance.
Signed-off-by: Peyton Lee <peytolee@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit removes an unnecessary NULL check in the
`dcn10_set_input_transfer_func` function in the `dcn10_hwseq.c` file.
The variable `tf` is assigned the address of
`plane_state->in_transfer_func` unconditionally, so it can never be
`NULL`. Therefore, the check `if (tf == NULL)` is unnecessary and has
been removed.
Fixes the below smatch warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1839 dcn10_set_input_transfer_func() warn: address of 'plane_state->in_transfer_func' is non-NULL
Fixes: 285a7054bf81 ("drm/amd/display: Remove plane and stream pointers from dc scratch")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit removes a redundant NULL check in the
`dce110_set_input_transfer_func` function in the `dce110_hwseq.c` file.
The variable `tf` is assigned the address of
`plane_state->in_transfer_func` unconditionally, so it can never be
`NULL`. Therefore, the check `if (tf == NULL)` is unnecessary and has
been removed.
Fixes the below smatch warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dce110/dce110_hwseq.c:301 dce110_set_input_transfer_func() warn: address of 'plane_state->in_transfer_func' is non-NULL
Fixes: 285a7054bf81 ("drm/amd/display: Remove plane and stream pointers from dc scratch")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The retry loop for SRIOV reset have refcount and memory leak issue.
Depending on which function call fails it can potentially call
amdgpu_amdkfd_pre/post_reset different number of times and causes
kfd_locked count to be wrong. This will block all future attempts at
opening /dev/kfd. The retry loop also leakes resources by calling
amdgpu_virt_init_data_exchange multiple times without calling the
corresponding fini function.
Align with the bare-metal reset path which doesn't have these issues.
This means taking the amdgpu_amdkfd_pre/post_reset functions out of the
reset loop and calling amdgpu_device_pre_asic_reset each retry which
properly free the resources from previous try by calling
amdgpu_virt_fini_data_exchange.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable initializing Display Manager for DCN410 IP
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are other reset sources that pass NULL as the job pointer, such as
amdgpu_amdkfd_reset_work. Therefore, using the job pointer to check if
the FLR comes from the host does not work.
Add a flag in reset_context to explicitly mark host triggered reset, and
set this flag when we receive host reset notification.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some times a hang GPU causes multiple reset sources to schedule resets.
The second source will be able to trigger an unnecessary reset if they
schedule after we call amdgpu_device_stop_pending_resets.
Move amdgpu_device_stop_pending_resets to after the reset is done. Since
at this point the GPU is supposedly in a good state, any reset scheduled
after this point would be a legitimate reset.
Remove unnecessary and incorrect checks for amdgpu_in_reset that was
kinda serving this purpose.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
increase retry times to wait host has enough time to complete reset.
Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
VF can't access FB when host is doing mode1 reset. Using sizeof to get
vf2pf info size, instead of reading it from vf2pf header stored in FB.
Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These lines are indented too far. Clean the whitespace.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are various spelling mistakes in dml2_printf messages, fix them.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add_margin_and_round_to_dfs_grainularity()
When building with clang 19 or newer (which strengthened some of the
enum conversion warnings for C), there is a warning (or error with
CONFIG_WERROR=y) around doing arithmetic with an enumerated type and a
floating point expression.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_dpmm/dml2_dpmm_dcn4.c:181:58: error: arithmetic between enumeration type 'enum dentist_divider_range' and floating-point type 'double' [-Werror,-Wenum-float-conversion]
181 | divider = (unsigned int)(DFS_DIVIDER_RANGE_SCALE_FACTOR * (vco_freq_khz / clock_khz));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
This conversion is expected due to the nature of the enumerated value
and definition, so silence the warning by casting the enumeration to an
integer explicitly to make it clear to the compiler.
Fixes: 70839da63605 ("drm/amd/display: Add new DCN401 sources")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Panel replay was enabled by default in commit 5950efe25ee0
("drm/amd/display: Enable Panel Replay for static screen use case"), but
it isn't working properly at least on some BOE and AUO panels. Instead
of being static the screen is solid black when active. As it's a new
feature that was just introduced that regressed VRR disable it for now
so that problem can be properly root caused.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3344
Fixes: 5950efe25ee0 ("drm/amd/display: Enable Panel Replay for static screen use case")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In the post_reset function, if the fast reset didn't succeed, we
are not clearing the fast_reset flag, which prevents firmware
sections from being reloaded. While at it, use panthor_fw_stop()
instead of manually writing DISABLE to the MCU_CONTROL register.
Fixes: 2718d91816ee ("drm/panthor: Add the FW logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430113727.493155-1-boris.brezillon@collabora.com
|
|
What needs to be asserted is that the pattern fits in the number
of bits provided by the user in patternbits, otherwise it would
be truncated when replicated according to the mask, which is
likely not the intended use of this function.
The pattern argument is a bitmap so use find_last_bit() instead
of fls(). The bit position starts at index 0 so remove "or equal"
from the comparison. XE_MAX_L3_BANK_MASK_BITS would be the
returned value if the pattern is 0, which can be the case on some
platforms.
v2: Check the result does not overflow the array (Lucas De Marchi)
v3: Use __fls() for long and handle mask == 0 (Lucas De Marchi)
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502124311.159695-1-francois.dugast@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
When we check for state values returned by the FW, we only cover part of
the 0:7 range. Make sure we catch FW inconsistencies by adding a default
to the switch statement, and flagging the group state as unknown in that
case.
When an unknown state is detected, we trigger a reset, and consider the
group as unusable after that point, to prevent the potential corruption
from creeping in other places if we continue executing stuff on this
context.
v2:
- Add Steve's R-b
- Fix commit message
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/3b7fd2f2-679e-440c-81cd-42fc2573b515@moroto.mountain/T/#u
Suggested-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502155248.1430582-1-boris.brezillon@collabora.com
|
|
Contrary to i915, in xe ADL-N is kept as a different platform, not a
subplatform of ADL-P. Since the display side doesn't need to
differentiate between P and N, i.e. IS_ALDERLAKE_P_N() is never called,
just fixup the compat header to check for both P and N.
Moving ADL-N to be a subplatform would be more complex as the firmware
loading in xe only handles platforms, not subplatforms, as going forward
the direction is to check on IP version rather than
platforms/subplatforms.
Fix warning when initializing display:
xe 0000:00:02.0: [drm:intel_pch_type [xe]] Found Alder Lake PCH
------------[ cut here ]------------
xe 0000:00:02.0: drm_WARN_ON(!((dev_priv)->info.platform == XE_ALDERLAKE_S) && !((dev_priv)->info.platform == XE_ALDERLAKE_P))
And wrong paths being taken on the display side.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425181610.2704633-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 6a2a90cba12b42eb96c2af3426b77ceb4be31df2)
Fixes: 44e694958b95 ("drm/xe/display: Implement display support")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
When you create a submenu using the 'menu' syntax, there is no
ambiguity about its end because the code between 'menu' and 'endmenu'
becomes the submenu.
In contrast, 'menuconfig' does not have the corresponding end marker.
Instead, the end of the submenu is inferred from symbol dependencies.
This is detailed in Documentation/kbuild/kconfig-language.rst, starting
line 348. It outlines two methods to place the code under the submenu:
(1) Open an if-block immediately after 'menuconfig', enclosing the
submenu content within it
(2) Add 'depends on' to every symbol intended for the submenu
Many subsystems opt for (1) because it reliably maintains the submenu
structure.
The DRM subsystem adopts (2). The submenu ends when the sequence of
'depends on DRM' breaks. It can be confirmed by running a GUI frontend
such as 'make menuconfig' and visiting the DRM menu:
< > Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) ----
If you toggle this, you will notice most of the DRM-related options
appear below it, not in the submenu.
I highly recommend the approach (1). Obviously, (2) is not reliable,
as the submenu breaks whenever someone forgets to add 'depends on DRM'.
This commit encloses the entire DRM configuration with 'if DRM' and
'endif', except for DRM_PANEL_ORIENTATION_QUIRKS.
Note:
Now, 'depends on DRM' properties inside the if-block are all redundant.
I leave it as follow-up cleanups.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426135602.2500125-1-masahiroy@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit d674858ff979550a0e97b4ac766f2640f0d9d7e7, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/3db958e3f4002e26cd963596d810c37feb315fb3.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit c0e0f139354c01e0213204e4a96e7076e5a3e396, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/bd93d43b07f8ed6368119f4a5ddac2ee80debe53.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit e075e496f516bf92bc0cbaf94d64e8d4a6b58321, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1ba76cc4d96a8afefff5d1bc42fb1e1329c5da68.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit 4d15125d7fe637f401e64e33c99513adf6586fdd, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/79824fec01eb9ab0673b9409f9b39cc8b5cc338d.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit 0323287de87d7e6e9c22c57d7440aa353a2298d0, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/89ac456805746b6d0c888f10c5120b11aacd3319.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit 3166e7e6d935caaef07605a5c90773fbf9ffeaf4, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/a40e70a0abd3d841c23c107d452a43fdd70ef37a.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit f6d2dc03fa8546b284dd8c1af027d9fac5725921, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/bd288a5943dab8609f2d1f2bf413595a61df727a.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit d1ef8fc18be6adbbffdee06fbb5b33699e2852be, as the
commit it fixes will be reverted, too.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/df2876c72e82cbecfe8406fa058e8d3e895e4b93.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit 0209df3b4731516fe77638bfc52ba2e9629c67cd, as the
commit it fixes (which is BTW not the commit in the Fixes: tag!) will be
reverted, too.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/b2d1a7a765e4af249f4c450383de6e8422647e2e.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit 7fa678cc0a5648b5ea28629a2d21b9d4b6ac8f56, as the
commit it fixes will be reverted, too.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/17b6a2c5f3250a7d02ee1b517182ca6fd9baa45a.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit a57e191ebbaa0363dbf352cc37447c2230573e29, as the
commits it fixes will be reverted, too.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/37216404c77b4c677d3b3a80d12d6d4447a3f3a0.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
We can use upd_ctx.timedout_mask directly, and the faulty_slots update
in the flush_caches_failed situation is never used.
Suggested-by: Suggested-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425103920.826458-1-boris.brezillon@collabora.com
|
|
Intel hardware is capable of programming the Maud/Naud SDPs on its
own based on real-time clocks. While doing so, it takes care
of any deviations from the theoretical values. Programming the registers
explicitly with static values can interfere with this logic. Therefore,
let the HW decide the Maud and Naud SDPs on it's own.
Cc: stable@vger.kernel.org # v5.17
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8097
Co-developed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430091825.733499-1-chaitanya.kumar.borah@intel.com
|
|
Rewrite some docs that are not up-to-date any longer. Remove the TODO
item for fbdev-generic conversion, as the helper has been replaced. Make
documentation for DMA, SHMEM and TTM emulation available.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-44-tzimmermann@suse.de
|
|
Only TTM-based drivers use fbdev-generic. Rename it to fbdev-ttm and
change the symbol infix from _generic_ to _ttm_. Link the source file
into TTM helpers, so that it is only build if TTM-based drivers have
been selected. Select DRM_TTM_HELPER for loongson.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-43-tzimmermann@suse.de
|
|
Implement fbdev emulation with fbdev-dma. Fbdev-dma now supports
damage handling, which is required by st7735r. Avoids the overhead of
fbdev-generic's additional shadow buffering. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Lechner <david@lechnology.com>
Acked-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-42-tzimmermann@suse.de
|
|
Implement fbdev emulation with fbdev-dma. Fbdev-dma now supports
damage handling, which is required by st7586. Avoids the overhead of
fbdev-generic's additional shadow buffering. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Lechner <david@lechnology.com>
Acked-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-41-tzimmermann@suse.de
|
|
Implement fbdev emulation with fbdev-dma. Fbdev-dma now supports
damage handling, which is required by repaper. Avoids the overhead of
fbdev-generic's additional shadow buffering. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-40-tzimmermann@suse.de
|
|
Implement fbdev emulation with fbdev-dma. Fbdev-dma now supports
damage handling, which is required by panel-mipi-dbi. Avoids the
overhead of fbdev-generic's additional shadow buffering. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-39-tzimmermann@suse.de
|
|
Implement fbdev emulation with fbdev-dma. Fbdev-dma now supports
damage handling, which is required by mi0283qt. Avoids the overhead of
fbdev-generic's additional shadow buffering. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-38-tzimmermann@suse.de
|
|
Implement fbdev emulation with fbdev-dma. Fbdev-dma now supports
damage handling, which is required by ili9486. Avoids the overhead of
fbdev-generic's additional shadow buffering. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-37-tzimmermann@suse.de
|
|
Implement fbdev emulation with fbdev-dma. Fbdev-dma now supports
damage handling, which is required by ili9341. Avoids the overhead of
fbdev-generic's additional shadow buffering. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-36-tzimmermann@suse.de
|
|
Implement fbdev emulation with fbdev-dma. Fbdev-dma now supports
damage handling, which is required by ili9225. Avoids the overhead of
fbdev-generic's additional shadow buffering. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Lechner <david@lechnology.com>
Acked-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-35-tzimmermann@suse.de
|
|
Implement fbdev emulation with fbdev-dma. Fbdev-dma now supports
damage handling, which is required by ili9163. Avoids the overhead of
fbdev-generic's additional shadow buffering. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-34-tzimmermann@suse.de
|
|
Implement fbdev emulation with fbdev-dma. Fbdev-dma now supports
damage handling, which is required by hx8357d. Avoids the overhead of
fbdev-generic's additional shadow buffering. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-33-tzimmermann@suse.de
|
|
Implement fbdev emulation with fbdev-dma. Fbdev-dma now supports
damage handling, which is required by rockchip. Avoids the overhead of
fbdev-generic's additional shadow buffering. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-32-tzimmermann@suse.de
|
|
Implement fbdev emulation with fbdev-dma. Fbdev-dma now supports
damage handling, which is required by shmobile. Avoids the overhead of
fbdev-generic's additional shadow buffering. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-31-tzimmermann@suse.de
|
|
Implement fbdev emulation with fbdev-dma. Fbdev-dma now supports
damage handling, which is required by rz-du. Avoids the overhead of
fbdev-generic's additional shadow buffering. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-30-tzimmermann@suse.de
|
|
Implement fbdev emulation with fbdev-dma. Fbdev-dma now supports
damage handling, which is required by rcar-du. Avoids the overhead of
fbdev-generic's additional shadow buffering. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-29-tzimmermann@suse.de
|
|
Implement fbdev emulation with fbdev-dma. Fbdev-dma now supports
damage handling, which is required by panel-ilitek-9341. Avoids
the overhead of fbdev-generic's additional shadow buffering. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-28-tzimmermann@suse.de
|
