| Age | Commit message (Collapse) | Author |
|---|
|
[WHY]
If there are no DC clock limits present, or if the DC limits are the same
as the AC limits, we can disable the AC/DC codepath as there won't be any
validation differences between the two modes.
[HOW]
When all DC power mode clock limits are the same as the max clock
values, there won't be any difference between AC mode and DC mode. Zero
out DC limits that equal max and provide a new cap to indicate the
presence of any non-zero DC mode limit. In summary:
- zero out DC limits that are the same as max clock value
- new dc cap to indicate the presence of DC mode limits
- set limits present if any clock has distinct AC and DC values from SMU
Acked-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Create dcn401 specific structure to encapsulate version specific
variables.
Acked-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Added support to capture unsch fw debug logs in debugfs.
To enable set amdgpu_umschfw_log =1 in boot args.
v1 - rename variable to umsch_mm_fwlog (Veera)
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Based on the documentation the maximum resolustion should
be 16384x16384.
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On suspend, we need to set power gating state to GATE when
VCN5 is busy, otherwise we will get following error on resume:
[drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring vcn_unified_0 test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <vcn_v5_0_0> failed -110
amdgpu: amdgpu_device_ip_resume failed (-110).
PM: dpm_run_callback(): pci_pm_resume+0x0/0x100 returns -110
PM: failed to resume async: error -110
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We do not directly enable/disable VCN IRQ in vcn 5.0.0.
And we do not handle the IRQ state as well. So the calls to
disable IRQ and set state are removed. This effectively gets
rid of the warining of
"WARN_ON(!amdgpu_irq_enabled(adev, src, type))"
in amdgpu_irq_put().
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
and smu14
Check the input value for CUSTOM profile mode setting on smu 11,
smu13 and smu14. Otherwise we use uninitialized value of input[]
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check the input value for CUSTOM profile mode setting on legacy
SOCs. Otherwise we may use uninitalized value of input[]
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Support for I2C_CLASS_SPD is currently being removed from the kernel.
Only remaining step is to remove the definition of I2C_CLASS_SPD.
Setting I2C_CLASS_SPD in a driver is a no-op meanwhile, so remove it
here.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In some causes, HPD signals will jitter when plugging in
or unplugging HDMI.
Rescheduling the hotplug work for a second when EDID may still be
readable but HDP is disconnected, and fixes this issue.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Analysis of code by Coverity, a static code analyser, has identified
a resource leak in the symbol hmm_range. This leak occurs when one of
the prior steps before it is released encounters an error.
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Adjust mes12 initialization sequence to fix mapping
legacy queue.
v2: use dev_err.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On system with khugepaged enabled and user cases with THP buffer, the
hmm_range_fault may takes > 15 seconds to return -EBUSY, the arbitrary
timeout value is not accurate, cause memory allocation failure.
Remove the arbitrary timeout value, return EAGAIN to application if
hmm_range_fault return EBUSY, then userspace libdrm and Thunk will call
ioctl again.
Change EAGAIN to debug message as this is not error.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Nothing in xe needs xe->sb_lock. None of the i915 display code using
->sb_lock gets built with xe, and in any case that would be wrong as xe
uses gt->pcode.lock for this.
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510094313.3422982-2-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The xe->enabled_irq_mask member has never been used for anything.
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510094313.3422982-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer forward declarations over #include xe_reg_sr_types.h
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513084218.2084-5-michal.wajdeczko@intel.com
|
|
Prefer forward declarations over #include xe_lrc_types.h
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513084218.2084-4-michal.wajdeczko@intel.com
|
|
We don't need to include xe_guc_ads_types.h here.
Use forward declaration instead.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513084218.2084-3-michal.wajdeczko@intel.com
|
|
We don't need to include drm/drm_managed.h here.
We don't need to comment final #endif.
Also remove empty line at the end.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513084218.2084-2-michal.wajdeczko@intel.com
|
|
Prefer struct drm_edid based functions over struct edid.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ed6e76a9e94816789ca9caf8775d6a6156877496.1715347488.git.jani.nikula@intel.com
|
|
Prefer struct drm_edid based functions over struct edid.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/24536f4a1a12af7b43ba86e9761dfeef179b72df.1715347488.git.jani.nikula@intel.com
|
|
Prefer struct drm_edid based functions over struct edid.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/485a33bc4eba9daae109d3f4795bc695e026ba0c.1715347488.git.jani.nikula@intel.com
|
|
Prefer struct drm_edid based functions over struct edid.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1d1290829fa463237b560c43e77170a986186031.1715347488.git.jani.nikula@intel.com
|
|
Prefer struct drm_edid based functions over struct edid.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/035c7c31a3e096625a69eb4657c1727da4021a62.1715347488.git.jani.nikula@intel.com
|
|
Prefer struct drm_edid based functions over struct edid.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/74b2f00e17b2614b44955cf0cbae270f3c31d91a.1715347488.git.jani.nikula@intel.com
|
|
The checks on the existence of bridge->encoder in the implementation of
drm_bridge_funcs::attach() is not necessary, as it has already been checked
in the drm_bridge_attach() function call by previous bridge or KMS driver.
The drm_bridge_attach() will quit with a negative error code returned if
it fails for some reasons, hence, it is guaranteed that the .encoder member
of the drm_bridge instance is not NULL when various bridge attach functions
are called.
Remove the redundant checking codes "if (!bridge->encoder) { ... }".
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513153109.46786-13-sui.jingfeng@linux.dev
|
|
The checks on the existence of bridge->encoder in the implementation of
drm_bridge_funcs::attach() is not necessary, as it has already been checked
in the drm_bridge_attach() function call by previous bridge or KMS driver.
The drm_bridge_attach() will quit with a negative error code returned if
it fails for some reasons, hence, it is guaranteed that the .encoder member
of the drm_bridge instance is not NULL when various i.MX specific bridge
attach functions are called.
Remove the redundant checking codes "if (!bridge->encoder) { ... }".
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513153109.46786-12-sui.jingfeng@linux.dev
|
|
In the lt9611uxc_connector_init() function, the check on the existence
of bridge->encoder is not necessary, as it has already been checked in
the drm_bridge_attach() function. And the check on the drm bridge core
happens before check in the implementation. Hence, it is guaranteed that
the .encoder member of the struct drm_bridge is not NULL when
lt9611uxc_connector_init() function get called.
Remove the redundant checking codes "if (!bridge->encoder) { ... }".
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513153109.46786-11-sui.jingfeng@linux.dev
|
|
bridge->encoder
In the dw_mipi_dsi_bridge_attach() function, the check on the existence
of bridge->encoder is not necessary, as it has already been checked in
the drm_bridge_attach() function invocked by previous bridge or KMS driver.
The previous drm_bridge_attach() will quit with a negative error code
returned if it fails for some reasons, hence, it is guaranteed that the
.encoder member of the struct drm_bridge is not NULL when
dw_mipi_dsi_bridge_attach() function gets called.
Remove the redundant checking codes "if (!bridge->encoder) { ... }".
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513153109.46786-10-sui.jingfeng@linux.dev
|
|
existence of bridge->encoder
In the ge_b850v3_lvds_create_connector function, the check on the existence
of bridge->encoder is not necessary, as it has already been checked in the
drm_bridge_attach() function called by upstream bridge or driver. Hence, it
is guaranteed that the .encoder member of the drm_bridge instance is not
NULL when cdns_mhdp_connector_init() function get called.
Remove the redundant checking codes "if (!bridge->encoder) { ... }".
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513153109.46786-9-sui.jingfeng@linux.dev
|
|
bridge->encoder
In the cdns_mhdp_connector_init() function, the check on the existence
of bridge->encoder is not necessary, as it has already been checked in
the drm_bridge_attach() function. As the cdns_mhdp_connector_init() is
only called by cdns_mhdp_attach(), it is guaranteed that the .encoder
member of the struct drm_bridge is not NULL when cdns_mhdp_attach() gets
called.
Remove the redundant checking codes "if (!bridge->encoder) { ... }".
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513153109.46786-8-sui.jingfeng@linux.dev
|
|
In the adv7511_connector_init() function, the check on the existence of
bridge->encoder is not necessary. As it has already been checked in the
drm_bridge_attach() which happens prior to the adv7511_bridge_attach()
get called. Also note that the adv7511_connector_init() is only called by
adv7511_bridge_attach(). Hence, it is guaranteed that the .encoder member
of the drm_bridge instance is not NULL when adv7511_connector_init() get
called.
Remove the redundant checking codes "if (!bridge->encoder) { ... }".
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513153109.46786-7-sui.jingfeng@linux.dev
|
|
In it6505_bridge_attach(), the check on the existence of 'bridge->encoder'
is not necessary, as it has already been checked in the drm_bridge_attach()
which happens prior to it6505_bridge_attach() get called. Note that the
it6505_bridge_attach() will only be called by .attach() of the previous
bridge or KMS driver. The previous drm_bridge_attach() will quit with a
negative error code returned if it fails for some reasons. Hence, it is
guaranteed that the .encoder member of the drm_bridge instance is not NULL
when it6505_bridge_attach() function get called.
Remove the redundant checking codes "if (!bridge->encoder) { ... }".
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513153109.46786-6-sui.jingfeng@linux.dev
|
|
Because the existence of 'bridge->encoder' has already been checked before
the panel_bridge_attach() function get called, and the drm_bridge_attach()
will quit with a negative error code returned if it fails for some reasons.
Hence, it is guaranteed that the .encoder member of the drm_bridge instance
is not NULL when panel_bridge_attach() function get called.
Remove the redundant checking codes "if (!bridge->encoder) { ... }".
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513153109.46786-5-sui.jingfeng@linux.dev
|
|
bridge->encoder
Because the existence of 'bridge->encoder' has already been checked before
the ptn3460_bridge_attach() function get called, and drm_bridge_attach()
will quit with a negative error code returned if it fails for some reasons.
Hence, it is guaranteed that the .encoder member of the drm_bridge instance
is not NULL when the ptn3460_bridge_attach() function get called.
Remove the redundant checking codes "if (!bridge->encoder) { ... }".
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513153109.46786-4-sui.jingfeng@linux.dev
|
|
Because the existence of bridge->encoder has already been checked before
the simple_bridge_attach() function get called, And drm_bridge_attach()
will quit with a negative error code returned if it fails for some reasons.
Hence, it is guaranteed that the .encoder member of the drm_bridge instance
is not NULL when the tfp410_attach() function get called.
Remove the redundant checking codes "if (!bridge->encoder) { ... }".
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513153109.46786-3-sui.jingfeng@linux.dev
|
|
bridge->encoder
Because the existence of 'bridge->encoder' has already been checked before
the simple_bridge_attach() function get called, and drm_bridge_attach()
will quit with a negative error code returned if it fails for some reasons.
Hence, it is guaranteed that the .encoder member of the drm_bridge instance
is not NULL when the simple_bridge_attach() get called.
Remove the redundant checking codes "if (!bridge->encoder) { ... }".
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513153109.46786-2-sui.jingfeng@linux.dev
|
|
Rename the fb pinning functions such that their name directly
informs us what gets pinned into which address space.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240506125718.26001-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
We use a mix of 'intel_fb' vs. 'ifbdev->fb' in the same function.
Both should be pointing at the same thing. Make things less
confusing by just getting existing fb from 'ifbdev->fb' at the
start and then sticking with the local 'fb' (renamed from the
'intel_fb') until the very end.
v2: rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510102257.25096-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Change intel_fbdev_fb_alloc() to return struct intel_fb instead
of struct drm_framebuffer. Let's us eliminate some annoying
aliasing variables in the fbdev setup code.
v2: Assing the results to the correct variable (Jani)
Fix xe's copy
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510102233.25057-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Make the 'fb' pointers const in the pinning code. We never
want to mutate these. Also nuke a few aliasing fb vs. intel_fb
cases by just using the more specific type everywhere in the
same function.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240506125718.26001-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The mapings should be replaced by mappings.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513061451.1627-1-wangdeming@inspur.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
WA_14020863754: Corner case with Min Hblank Fix can cause
audio hang
Issue: Previously a fix was made to avoid issues with extremely
small hblanks, called the "Min Hblank Fix". However, this can
potentially cause an audio hang.
Workaround :
During "Audio Programming Sequence" Audio Enabling -
When DP mode is enabled Set mmio offset 0x65F1C bit 18 = 1b,
before step #1 "Enable audio Presence Detect"
During "Audio Programming Sequence" Audio Disabling -
When DP mode is enabled Clear mmio offset 0x65F1C bit 18 = 0b,
after step #6 "Disable Audio PD (Presence Detect)"
If not clearing PD bit, must also not clear 0x65F1C bit 18 (leave = 1b)
v2: Update the platform checks (Jani Nikula)
v3: Limited the WA to LNL and BMG, added a helper (Matt Roper)
v4: Updated the bit naming, fixed redundant if statement
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240509053508.2807834-1-uma.shankar@intel.com
|
|
99a741aa7a2d ("i2c: mux: gpio: remove support for class-based device
instantiation") removed the last call to i2c_mux_add_adapter() with a
non-null class argument. Therefore the class argument can be removed.
Note: Class-based device instantiation is a legacy mechanism which
shouldn't be used in new code, so we can rule out that this argument
may be needed again in the future.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Udl's struct udl_connector is an empty wrapper around struct
drm_connector. Remove it. Allocate the connector as part of struct
udl_device and inline the init function into its only caller.
v2:
- fix return value in udl_modeset_init() (Dan)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510154841.11370-6-tzimmermann@suse.de
|
|
Provide separate implementations of .get_modes() and .detect_ctx()
from struct drm_connector. Switch to struct drm_edid.
Udl's .detect() helper used to fetch the EDID from the adapter and the
.get_modes() helper provided display modes from the data. But this
relied on the DRM helpers to call the functions in the correct order.
When no EDID could be retrieved, .detect() regularly printed a warning
to the kernel log.
Switching to the new helpers around struct drm_edid separates both from
each other. The .get_modes() helper now fetches the EDID by itself and
the .detect_ctx() helper only tests for its presence. The patch does a
number of things to implement this.
- Move udl_get_edid_block() to udl_edid.c and rename it to
udl_read_edid_block(). Then use the helper to implement probing in
udl_probe_edid() and reading in udl_edid_read(). The latter helper
is build on top of DRM helpers.
- Replace the existing code in .get_modes() and .detect() with udl's
new EDID helpers. The new code behaves like DRM's similar DDC-based
helpers. Instead of .detect(), udl now implements .detect_ctx().
- Remove the edid data from struct udl_connector. The field cached
the EDID data between calls to .detect() and .get_modes(), but is now
unused.
v3:
- implement udl_probe_edid() with memchr_inv() (Jani)
v2:
- implement udl_probe_edid() within udl
- reword commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510154841.11370-5-tzimmermann@suse.de
|
|
Clean up Makefile before listing new object files. No functional
changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510154841.11370-4-tzimmermann@suse.de
|
|
Protect the code in udl_get_edid_block() with drm_dev_enter() and
drm_dev_exit(), so that all callers automatically invoke it. The
function uses hardware resources, which can be hot-unplugged at
any time. The other code in udl_connector_detect() does not use the
resources of the hardware device and therefore does not require
protection.
This change will allow to use udl_get_edid_block() in various
contexts easily.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510154841.11370-3-tzimmermann@suse.de
|
|
DisplayLink devices do not generate hotplug events. Remove the poll
flag DRM_CONNECTOR_POLL_HPD, as it may not be specified together with
DRM_CONNECTOR_POLL_CONNECT or DRM_CONNECTOR_POLL_DISCONNECT.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: afdfc4c6f55f ("drm/udl: Fixed problem with UDL adpater reconnection")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: Robert Tarasov <tutankhamen@chromium.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.15+
Link: https://patchwork.freedesktop.org/patch/msgid/20240510154841.11370-2-tzimmermann@suse.de
|
|
Write panel override luminance values which helps the TCON decide
if tone mapping needs to be enabled or not.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240507040407.1056061-8-suraj.kandpal@intel.com
|
