| Age | Commit message (Collapse) | Author |
|---|
|
There is a HW issue that arises when there are race conditions
between TCSS entering/exiting TC7 or TC10 states while the
driver is asserting/deasserting TCSS power request. As a
workaround, Display driver will implement a mailbox sequence
to ensure that the TCSS is in TC0 when TCSS power request is
asserted/deasserted.
The sequence is the following
1. Read mailbox command status and wait until run/busy bit is
clear
2. Write mailbox data value '1' for power request asserting
and '0' for power request deasserting
3. Write mailbox command run/busy bit and command value with 0x1
4. Read mailbox command and wait until run/busy bit is clear
before continuing power request.
v2: Rename WA function (Gustavo)
Limit WA only for PTL platform with a TODO note (Gustavo)
Add TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY for clarity when writing
register data (Gustavo)
Move register defs from i915_reg.h to intel_cx0_phy_regs.h (Gustavo)
v3: Use "struct intel_display" instead of "struct drm_i915_private" (Jani)
Move defs above C10 definitions in the
intel_cx0_phy_regs.h file (Gustavo)
Move drm_WARN_ON() inside WA function (Gustavo)
Rename workaround function as wa_14020908590() (Gustvo)
Use boolean enable instead of if-else structure (Raag)
v4: Drop drm_WARN_ON() (Raag)
Fix function definition to fit into a single line (Raag)
v5: Drop TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY from TCSS_DISP_MAILBOX_IN_CMD_DATA(val)
macro (Jani)
Rename WA function with some meaningful name and add comment
on WA number (Jani)
Use struct intel_display on WA calling function (Jani)
Reviewed-by: Raag Jadav <raag.jadav@intel.com> (v4)
Acked-by: Jani Nikula <jani.nikula@intel.com> (v5)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241127073200.124907-2-mika.kahola@intel.com
|
|
When the intel_context structure contains NULL,
it raises a NULL pointer dereference error in drm_info().
Fixes: e8a3319c31a1 ("drm/i915: Allow error capture without a request")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12309
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: <stable@vger.kernel.org> # v6.3+
Signed-off-by: Eugene Kobyak <eugene.kobyak@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/xmsgfynkhycw3cf56akp4he2ffg44vuratocsysaowbsnhutzi@augnqbm777at
|
|
Add a new ioctl, DRM_IOCTL_V3D_PERFMON_SET_GLOBAL, to allow
configuration of a global performance monitor (perfmon).
Use the global perfmon for all jobs to ensure consistent
performance tracking across submissions. This feature is
needed to implement a Perfetto datasources in user-space.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241202140615.74802-1-christian.gmeiner@gmail.com
|
|
ttm_bo_access() returns the size on success, account for that otherwise
the caller incorrectly thinks this is an error in
intel_atomic_prepare_plane_clear_colors().
v2 (Thomas)
- Make sure we check for the partial copy case. Also since this api is
easy to get wrong, wrap the whole thing in a new helper to hide the
details and then convert the existing users over.
Fixes: b6308aaa24a7 ("drm/xe/display: Update intel_bo_read_from_page to use ttm_bo_access")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3661
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241202170102.88893-2-matthew.auld@intel.com
|
|
The PHY is either c10 or c20, there's no need to check at runtime and
complicate the conditions in mtl_get_cx0_buf_trans().
While at it, replace the direct port clock check with
intel_dp_is_uhbr().
Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241129114158.486418-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Split resume into a 3rd step to handle displays when DCC is
enabled on DCN 4.0.1. Move display after the buffer funcs
have been re-enabled so that the GPU will do the move and
properly set the DCC metadata for DCN.
v2: fix fence irq resume ordering
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
dma-buf:
- Fix dma_fence_array_signaled() to ensure forward progress
dp_mst:
- Fix MST sideband message body length check
sti:
- Add __iomem for mixer_dbg_mxn()'s parameter
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128135958.GA244627@linux.fritz.box
|
|
The IRQ indexes for the intf_6 underrun/vsync interrupts are swapped.
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 16) is the actual underrun interrupt and
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 17) is the vsync interrupt.
This causes timeout errors when using the DP2 controller, e.g.
[dpu error]enc37 frame done timeout
*ERROR* irq timeout id=37, intf_mode=INTF_MODE_VIDEO intf=6 wb=-1, pp=2, intr=0
*ERROR* wait disable failed: id:37 intf:6 ret:-110
Correct them to fix these errors and make DP2 work properly.
Cc: stable@vger.kernel.org
Fixes: e3b1f369db5a ("drm/msm/dpu: Add X1E80100 support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/624681/
Link: https://lore.kernel.org/r/20241115-x1e80100-dp2-fix-v1-1-727b9fe6f390@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
When performing a guc_mmio_regset_write, we add all the registers in the
reg_sr list to the save/restore list, but do not do the same for the
nonpriv registers. Add them in.
v2:
- Add all NONPRIV registers to avoid undefined behavior (Harrison)
- s/whitelist/nonpriv
v3:
- Rebase
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2249
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
CC: Lucas de Marchi <lucas.demarchi@intel.com>
CC: Matt Roper <matthew.d.roper@intel.com>
CC: John Harrison <john.c.harrison@intel.com>
CC: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
CC: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241122180826.7075-1-jonathan.cavitt@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The Battlemage (BMG) discrete graphics card supports the Platform,
Monitoring Technology (PMT) feature directly on the primary PCI device.
Utilize the PMT callback API to add support for the BMG devices.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203153639.2982162-1-michael.j.ruhl@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
SST with 128b/132b channel coding needs this too. Extract to a separate
helper, independent of MST.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/904fa73ea9ea976185062eeb493a08ffc43ed27e.1733238941.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
SST with 128b/132b channel coding needs this too. Extract to a separate
helper, independent of MST.
v2: Clean up kernel-doc a bit
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f626715ba4e348546770750aa3e10fac73a5cbd7.1733238941.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
SST with 128b/132b channel coding needs this too. Extract to a separate
helper, independent of MST.
Pass timeout in as a parameter, anticipating that we can reduce the
timeout for SST.
v2: Clean up kernel-doc a bit
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/459fd3e96a55a8ea8ada8d27d93eaa24c235f9c1.1733238941.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Use the new helper to export stats about memory usage.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
Alignment checking is only needed to be done in the upper caller function.
If those address and sizes are able to pass the check, it will certainly
pass the same test in the etnaviv_context_unmap() function. We don't need
examine it more than once.
Remove redundant alignment tests, move the those useless to upper caller
function.
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
The value of the 'iova' variable is the start GPUVA that is going to be
mapped, its value doesn't changed when the mapping is on going.
Replace it with the 'da' variable, which is incremental and it reflects
the actual address being mapped exactly.
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
The etnaviv driver, both kernel space and user space, assumes that GPU page
size is 4KiB. Its IOMMU map/unmap 4KiB physical address range once a time.
If 'sg->offset != 0' is true, then the current implementation will map the
IOVA to a wrong area, which may lead to coherency problem. Picture 0 and 1
give the illustration, see below.
PA start drifted
|
|<--- 'sg_dma_address(sg) - sg->offset'
| .------ sg_dma_address(sg)
| | .---- sg_dma_len(sg)
|<-sg->offset->| |
V |<-->| Another one cpu page
+----+----+----+----+ +----+----+----+----+
|xxxx| |||||| |||||||||||||||||||||
+----+----+----+----+ +----+----+----+----+
^ ^ ^ ^
|<--- da_len --->| | |
| | | |
| .--------------' | |
| | .----------------' |
| | | .----------------'
| | | |
| | +----+----+----+----+
| | |||||||||||||||||||||
| | +----+----+----+----+
| |
| '--------------. da_len = sg_dma_len(sg) + sg->offset, using
| | 'sg_dma_len(sg) + sg->offset' will lead to GPUVA
+----+ ~~~~~~~~~~~~~+ collision, but min_t(unsigned int, da_len, va_len)
|xxxx| | will clamp it to correct size. But the IOVA will
+----+ ~~~~~~~~~~~~~+ be redirect to wrong area.
^
| Picture 0: Possibly wrong implementation.
GPUVA (IOVA)
--------------------------------------------------------------------------
.------- sg_dma_address(sg)
| .---- sg_dma_len(sg)
|<-sg->offset->| |
| |<-->| another one cpu page
+----+----+----+----+ +----+----+----+----+
| |||||| |||||||||||||||||||||
+----+----+----+----+ +----+----+----+----+
^ ^ ^ ^
| | | |
.--------------' | | |
| | | |
| .--------------' | |
| | .----------------' |
| | | .----------------'
| | | |
+----+ +----+----+----+----+
|||||| ||||||||||||||||||||| The first one is SZ_4K, the second is SZ_16K
+----+ +----+----+----+----+
^
| Picture 1: Perfectly correct implementation.
GPUVA (IOVA)
If sg->offset != 0 is true, IOVA will be mapped to wrong physical address.
Either because there doesn't contain the data or there contains wrong data.
Strictly speaking, the memory area that before sg_dma_address(sg) doesn't
belong to us, and it's likely that the area is being used by other process.
Because we don't want to introduce confusions about which part is visible
to the GPU, we assumes that the size of GPUVA is always 4KiB aligned. This
is very relaxed requirement, since we already made the decision that GPU
page size is 4KiB (as a canonical decision). And softpin feature is landed,
Mesa's util_vma_heap_alloc() will certainly report correct length of GPUVA
to kernel with desired alignment ensured.
With above statements agreed, drop the "offset in page" manipulation will
return us a correct implementation at any case.
Fixes: a8c21a5451d8 ("drm/etnaviv: add initial etnaviv DRM driver")
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
Changes made with the following Coccinelle rules:
@@ constant C; @@
- msecs_to_jiffies(C * 1000)
+ secs_to_jiffies(C)
@@ constant C; @@
- msecs_to_jiffies(C * MSEC_PER_SEC)
+ secs_to_jiffies(C)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
In the etnaviv_gem_vmap_impl() function, the driver vmap whatever buffers
with write combine(WC) page property, this is incorrect. Cached buffers
should be mapped with the cached page property and uncached buffers should
be mapped with the uncached page property.
Fixes: a0a5ab3e99b8 ("drm/etnaviv: call correct function when trying to vmap a DMABUF")
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
The etnaviv_perfmon.h header is about performance monitor, it can hardly
has something to do with command buffer suballocator. Drop it.
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
Referencing the 'struct etnaviv_gpu *' by every etnaviv GEM BO is weird.
Drop it and drop yet another unused data field, namely 'access'.
Memory footprint of etnaviv GEM BOs reduced.
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
Instead of a TTM reference grab a GEM reference whenever necessary for a
VM mapping.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240723121750.2086-7-christian.koenig@amd.com
|
|
Remove the connector-status initialization from several of vmwgfx's
functions. It is not required by the driver or DRM helpers.
DRM initializes the connector to unknown status in __drm_connector_init()
and reads the physical status when DRM clients or the user needs the
information, or if it detects/polls a change to the status.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105132045.471856-1-tzimmermann@suse.de
|
|
This is essentially a duplicate of drm_for_each_crtc() anyway. Remove.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241202125437.1154945-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Adding lockdep checking to the coredump code showed that there was an
existing violation. The dev_coredumpm_timeout() call is used to
register the dump with the base coredump subsystem. However, that
makes multiple memory allocations, only some of which use the GFP_
flags passed in. So that also needs to be deferred to the worker
function where it is safe to allocate with arbitrary flags.
In order to not add protoypes for the callback functions, moving the
_timeout call also means moving the worker thread function to later in
the file.
v2: Rebased after other changes to the worker function.
Fixes: e799485044cb ("drm/xe: Introduce the dev_coredump infrastructure.")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: intel-xe@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128210824.3302147-3-John.C.Harrison@Intel.com
(cherry picked from commit 90f51a7f4ec1004fc4ddfbc6d1f1068d85ef4771)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Fix missing initial value for last_value.
For GuC capture register definition, it is required to define 64bit
register in a pair of 2 consecutive 32bit register entries, low first,
then hi. Add code to check this order.
Changes from prior revs:
v5:- Correct cross-line comment format
v4:- Fix warn on condition and remove skipping
v3:- Move break inside brace
v2:- Correct the fix tag pointed commit
Add examples in comments for warning
Add 1 missing hi condition check
Fixes: ecb633646391 ("drm/xe/guc: Plumb GuC-capture into dev coredump")
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241126201052.1937079-1-zhanjun.dong@intel.com
(cherry picked from commit 6f59fbcfa041e7d69e5e5f39d4c8cffa06fdc50b)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
In pll_get_integloop_gain(), digclk_divsel=1 or 2, base=63 or 196ULL,
so the base may be 63, 126, 196, 392. The condition base <= 2046
always true.
Fixes: caedbf17c48d ("drm/msm: add msm8998 hdmi phy/pll support")
Signed-off-by: Rex Nie <rex.nie@jaguarmicro.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/624153/
Link: https://lore.kernel.org/r/20241112074101.2206-1-rex.nie@jaguarmicro.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
The msm_dp_utils_pack_sdp_header() accepts an unlimited-size u32 pointer
for the header output, while it expects a two-element array. It performs
a sizeof check which is always true on 64-bit platforms (since
sizeof(u32*) is 8) and is always false on 32-bit platforms. It returns
an error code which nobody actually checks.
Fix the function interface to accept u32[2] and return void, skipping
all the checks.
Fixes: 55fb8ffc1802 ("drm/msm/dp: add VSC SDP support for YUV420 over DP")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/626806/
Link: https://lore.kernel.org/r/20241202-fd-dp-audio-fixup-v2-2-d9187ea96dad@linaro.org
[quic_abhinavk@quicinc.com: minor fix in the commit message]
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
Rather than printing random garbage from stack and pretending that it is
the default safe_to_exit_level, set the variable beforehand.
Fixes: d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411081748.0PPL9MIj-lkp@intel.com/
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/626804/
Link: https://lore.kernel.org/r/20241202-fd-dp-audio-fixup-v2-1-d9187ea96dad@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
There are now multiple places that can trigger a coredump. Some of
which can happen in parallel. There is already a check against
capturing multiple dumps sequentially, but without locking it doesn't
guarantee to work against concurrent dumps. And if two dumps do happen
in parallel, they can end up doing Bad Things such as one call stack
freeing the data the other call stack is still processing. Which leads
to a crashed kernel.
Further, it is possible for the DRM timeout to expire and trigger a
free of the capture while a user is still reading that capture out
through sysfs. Again leading to dodgy pointer problems.
So, add a mutext lock around the capture, read and free functions to
prevent inteference.
v2: Swap tiny scope spin_lock for larger scope mutex and fix
kernel-doc comment (review feedback from Matthew Brost)
v3: Move mutex locks to exclude worker thread and add reclaim
annotation (review feedback from Matthew Brost)
v4: Fix typo.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128210824.3302147-4-John.C.Harrison@Intel.com
|
|
Adding lockdep checking to the coredump code showed that there was an
existing violation. The dev_coredumpm_timeout() call is used to
register the dump with the base coredump subsystem. However, that
makes multiple memory allocations, only some of which use the GFP_
flags passed in. So that also needs to be deferred to the worker
function where it is safe to allocate with arbitrary flags.
In order to not add protoypes for the callback functions, moving the
_timeout call also means moving the worker thread function to later in
the file.
v2: Rebased after other changes to the worker function.
Fixes: e799485044cb ("drm/xe: Introduce the dev_coredump infrastructure.")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: intel-xe@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128210824.3302147-3-John.C.Harrison@Intel.com
|
|
There are debug level prints giving more information about the cause
of the hang immediately before core dumps are created. However, not
everyone has debug level prints enabled or saves the dmesg log at all.
So include that information in the dump file itself. Also, at least
one of those prints included the pid as well as the process name. So
include that in the capture too.
v2: Fix kvfree vs kfree and missing kernel-doc (review feedback from
Matthew Brost)
v3: Use GFP_ATOMIC instead of GFP_KERNEL.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241128210824.3302147-2-John.C.Harrison@Intel.com
|
|
smu->workload_mask is IP specific and should not be messed with in
the common code. The mask bits vary across SMU versions.
Move all handling of smu->workload_mask in to the backends and
simplify the code. Store the user's preference in smu->power_profile_mode
which will be reflected in sysfs. For internal driver profile
switches for KFD or VCN, just update the workload mask so that the
user's preference is retained. Remove all of the extra now unused
workload related elements in the smu structure.
v2: use refcounts for workload profiles
v3: rework based on feedback from Lijo
v4: fix the refcount on failure, drop backend mask
v5: rework custom handling
v6: handle failure cleanup with custom profile
v7: Update documentation
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
|
|
This reverts commit 74e1006430a5377228e49310f6d915628609929e.
This causes a regression in the workload selection.
A more extensive fix is being worked on.
For now, revert.
This came back after a merge in 6.13-rc1, so revert again.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3618
Fixes: 74e1006430a5 ("drm/amd/pm: correct the workload setting")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 44f392fbf628a7ff2d8bb8e83ca1851261f81a6f)
|
|
Use found block to call correct init/resume function on the block.
Set status.hw for resume and init.
Print re-init result again. Change to use dev_info.
Use amdgpu_device_ip_get_ip_block to get target block instead of
loop.
Fixes: 502d76308d45 ("drm/amdgpu: validate resume before function call")
Signed-off-by: Yiqing Yao <YiQing.Yao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ISP hw_init is not called with the recent changes related
to hw init levels. AMDGPU_INIT_LEVEL_DEFAULT is ignoring
the ISP IP block as AMDGPU_IP_BLK_MASK_ALL is derived using
incorrect max number of IP blocks.
Update AMDGPU_IP_BLK_MASK_ALL to use AMDGPU_MAX_IP_NUM
instead of (AMDGPU_MAX_IP_NUM - 1) to fix the issue.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Fixes: 14f2fe34f5c6 ("drm/amdgpu: Add init levels")
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Some DSC timing failed at bandwidth validation due to hactive
can't be evenly divided on each ODM segment.
[HOW]
Borrow from hblank to increase hactive to support these timing.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
Hardware does not support the VTotal to be between fp2 lines of the
maximum possible VTotal, so add a capability flag to track it and apply
where necessary.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
The minimum value of the dst_y_prefetch_equ was not correct
in prefetch calculation whice causes OPTC underflow.
[HOW]
Add the min operation of dst_y_prefetch_equ in prefetch calculation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
For better power profiling knowing the detile
buffer size at a given point in time
would be useful.
[HOW]
Add interface to retrieve detile buffer from
dc state.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Sung Lee <Sung.Lee@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
On some cards when odm is used, the monitor will have 2 separate pipes
split vertically. When compression is used on the YCbCr colour space on
the second pipe to have correct colours, we need to read a pixel from the
end of first pipe to accurately display colours. Hardware was programmed
properly to account for this extra pixel but it was not calculated
properly in software causing a split screen on some monitors.
[HOW]
The fix adjusts the second pipe's viewport and timings if the pixel
encoding is YCbCr422 or YCbCr420.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Peterson Guo <peterson.guo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Cacheline size is not available in IP discovery for gc943,gc944.
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Add MEC version from which alternate support for no PCIe atomics
is provided so that device is not skipped during KFD device init in
GFX1200/GFX1201.
Signed-off-by: Sreekant Somasekharan <sreekant.somasekharan@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
|
|
commit 38077562e059 ("drm/amd/display: Implement new
backlight_level_params structure") adjusted DC core to require
the backlight type to be programmed in the dc link when changing
brightness. This isn't initialized in amdgpu_dm for OLED panels
though which broke brightness.
Explicitly initialize when aux support is enabled.
Reported-and-tested-by: Luke Jones <luke@ljones.dev>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3792
Fixes: 38077562e059 ("drm/amd/display: Implement new backlight_level_params structure")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20241128032200.2085398-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
An HP Pavilion Aero Laptop 13-be0xxx/8916 has an ACPI EDID, but using
it is causing corruption. It's got illogical values of not specifying
a digital interface. Sanity check the ACPI EDID to avoid tripping such
problems.
Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3782
Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20241128032500.2088288-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
