| Age | Commit message (Collapse) | Author |
|---|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.13-2025-01-15:
amdgpu:
- SMU 13 fix
- DP MST fixes
- DCN 3.5 fix
- PSR fixes
- eDP fix
- VRR fix
- Enforce isolation fixes
- GFX 12 fix
- PSP 14.x fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115151602.210704-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.13:
- itee-it6263 error handling fix.
- Fix warn when unloading v3d.
- Fix W=1 build for kunit tests.
- Fix backlight regression for macbooks 5,1 in nouveau.
- Handle YCbCr420 better in bridge code, with tests.
- Fix cross-device fence handling in nouveau.
- Fix BO reservation handling in vmwgfx.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a89adcd5-2042-4e7f-93f4-2b299bb1ef17@linux.intel.com
|
|
The GuC log snapshot code would complain loudly if there was no GuC
log to take a snapshot of or if the snapshot alloc failed. Originally,
this code was only called on demand when a user (or developer)
explicitly requested a dump of the log. Hence an error message was
useful.
However, it is now part of the general devcoredump file and is called
for any GPU hang. Most people don't care about GuC logs and GPU hangs
do not generally mean a kernel/GuC bug. More importantly, there are
valid situations where there is no GuC log, e.g. SRIOV VFs.
So drop the error message.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3958
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113194405.2033085-1-John.C.Harrison@Intel.com
|
|
On Xe3, the register used to indicate which L3 banks are enabled on
the system is a new one called MIRROR_L3BANK_ENABLE. Each bit
represents one bank enabled in each node.
Extend the existing topology code for Xe3 to read this register and
generate the correct L3 bank mask, which can be read by user space
throug the topology query.
Bspec: 72573, 73439
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250114203853.35055-1-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Enable DCC (Duty Cycle Control) in Lunar Lake.
DCC is the SLPC task that tries to keep
the GT from operating inefficiently when thermally constrained.
Although the recommendation is to enable it, LNL GuC is leaving
it disabled by default on LNL.
It would minimize the GT frequency oscillation on throttled
scenarios, which could potentially reduce latencies.
v2: Move set_policies call after wait for running state, so
we ensure it is not overwritten. (Vinay)
v3: Fix English in the commit message (Jonathan)
v4: Also set disable to 0 so DCC can really get into effect.
v5: Avoid lnl_ prefix (Vinay)
v6: Finish renaming...
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> #v3
Link: https://patchwork.freedesktop.org/patch/msgid/20250115145053.1142023-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Allows the visualization of the current GuC power conservation
status and policies.
v2: Fix DCC msg (Vinay)
v3: Simplify pc_get_state_string (Jonathan)
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115145053.1142023-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add debug info to help investigate a very rare bug:
https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13385
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241221011925.3944625-1-John.C.Harrison@Intel.com
|
|
Plumb the DSB down into intel_vrr_send_push() so that we can
perform the opration on the DSB.
TRANS_PUSH, being a transcoder register, needs non-posted writes
to make it through.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-17-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
On ICL/TGL the VRR hardware injects an extra scanline just after
vactive. This essentically behaves the same as an extra line of
vblank delay, except it only appears in this one specific spot.
Consider our DSB interrupt signalling scheme:
1. arm the update
2. wait for undelayed vblank (or rather safe window with VRR)
3. wait for enough usecs to get past the delayed vblank
4. signal interrupt to indicate that arming has latched
If step 2 waits for end of vactive step 3 needs to account for
the extra one scanline, or else we risk signalling the interrupt
before the delayed vblank has actually elapsed. So include the
extra scanline in our vblank delay estimates.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-16-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
Turns out that TGL needs its vmin/vmax/flipline adjusted based
on the vblank delay, otherwise the hardware pushes the vtotals
further out. Make it so.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-15-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
Apparently only ICL/TGL need the annoying vmin adjustment.
On ADL+ we can program flipline==vmin and the hardware
actually respects that properly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-14-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
Introduce a VRR specific function for determining the current
vblank delay. Currently thus will give the same answer as
intel_mode_vblank_delay() but that will change later.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-13-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
Declutter intel_crtc_update_active_timings() a bit by
moving the code that determines the timings into a separate
function.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-12-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
We have approximately two copies of pre_commit_crtc_state(),
one in the DSB code, the other in the vblank evasion code.
Combine them into one. The slight difference between the two
is that vblank evasion doesn't have a full atomic state (when
called from the legacy cursor code), so it gets the old and
new crtc state passed in by hand.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-11-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
Extract the code that computes the hardware centric view
of the vblank delay into a helper. We'll need a slightly
different variant for VRR soon.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-10-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
When looking at raw hardware scanline numbers it's helpful to
remember what the offset between the hardware values and our
more human readable numbers should be. Include that in the state dump.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-9-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
Dump the calculated vmin/vmax vtotal values in addition to the
raw vmin/vmax/flipline values. Makes it much easier to see what
kind of scanline values we should be expecting from the hardware.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-8-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
While one can look at the crtc timings to determine the actual
vblank dealy, it seems nicer to provide a more human readable
dump of it to ease our lives.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-7-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
Try to dump all the important stuff relating to the display timings
in one spot.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-6-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
On ICL/TGL vmin/vmax/flipline won't actually match the
vtotal values (currently they do, but that is wrong and
needs to be fixed). Add a few helpers that will compute the
actual vtotal values for us.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-5-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
Include the headers in the correct alphabetical order.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-4-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
Make sure we have enough vblank for the computed vblank delay.
Supposedly we'd reject things anyway later if this gets violated,
but it seems nicer to do some basic sanity checks early just
so we can be sure the basic relationship vblank_end > vblank_start
always holds.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-3-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
Pull the vblank delay computation into a separate function.
We'll need more logic here soon and we don't want to pollute
intel_crtc_compute_config() with low level details.
We'll use HAS_DSB() to determine if any delay might be required
or not because delayed vblank only really exists for the
purposes of the DSB. It also doesn't event exists on any pre-tgl
platforms, which also don't have DSB. I was midly tempted
to check for the enable_dsb modparam here actually, but as
that can be changed dynamically via debugfs we'd need to either
reconfigure it on the fly or force a modeset. Neither will happen
currently, so we'll just assume DSB may be used of the platform
supports it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210211007.5976-2-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
We no longer use the prng, which leads to the following warning:
drivers/gpu/drm/tests/drm_buddy_test.c: In function
‘drm_test_buddy_alloc_clear’:
drivers/gpu/drm/tests/drm_buddy_test.c:264:23: error: unused variable
‘prng’ [-Werror=unused-variable]
264 | DRM_RND_STATE(prng, random_seed);
v2 (Thomas)
- Add Closes links
Reported-by: Jani Nikula <jani.nikula@intel.com>
Closes: https://lore.kernel.org/dri-devel/875xmggvcs.fsf@intel.com/
Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Closes: https://lore.kernel.org/dri-devel/3f816555e6913fdbcb254523f65c98088d70581b.camel@intel.com/
Fixes: 8cb3a1e2b350 ("drm/buddy: Add a testcase to verify the multiroot fini")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115124941.155990-2-matthew.auld@intel.com
|
|
This is a follow up fix for
https://patchwork.freedesktop.org/patch/msgid/20241203021929.1919730-1-oak.zeng@intel.com
The overall goal is to fail vm_bind when there is memory pressure. See more
details in the commit message of above patch. Abbove patch fixes the issue
when user pass in a vm_id parameter during gem_create. If user doesn't pass
in a vm_id during gem_create, above patch doesn't help.
This patch further reject BO eviction (which could be triggered by bo validation)
if BO is bound to the current VM. vm_bind could fail due to the eviction failure.
The BO to VM reverse mapping structure is used to determine whether BO is bound
to VM.
v2:
Move vm_bo definition from function scope to if(evict) clause (Thomas)
Further constraint the condition by adding ctx->resv (Thomas)
Add a short comment describe the change.
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110210137.3181576-1-oak.zeng@intel.com
|
|
Add missing VISACTL mux registers required for some OA
config's (e.g. RenderPipeCtrl).
Fixes: cdf02fe1a94a ("drm/xe/oa/uapi: Add/remove OA config perf ops")
Cc: stable@vger.kernel.org
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250111021539.2920346-1-ashutosh.dixit@intel.com
(cherry picked from commit c26f22dac3449d8a687237cdfc59a6445eb8f75a)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
If ccs_mode is being modified via
/sys/class/drm/cardX/device/tileY/gtY/ccs_mode
the asynchronous reset is triggered and the write returns immediately.
With that some test receive false information about number of CCS engines
or even fail if they proceed without delay after changing the ccs_mode.
Changing the ccs_mode change from async to sync to prevent failures in
tests.
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Fixes: f3bc5bb4d53d ("drm/xe: Allow userspace to configure CCS mode")
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211111727.1481476-3-maciej.patelczyk@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit 480fb9806e2e073532f7786166287114c696b340)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Add synchronous version gt reset as there are few places where it
is expected.
Also add a wait helper to wait until gt reset is done.
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Fixes: f3bc5bb4d53d ("drm/xe: Allow userspace to configure CCS mode")
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211111727.1481476-2-maciej.patelczyk@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit 155c77f45f63dd58a37eeb0896b0b140ab785836)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The guc_mmio_reg interface supports steering, but it is currently not
implemented. This will allow the GuC to control steering of MMIO
registers after save-restore and avoid reading from fused off MCR
register instances.
Fixes: 9c57bc08652a ("drm/xe/lnl: Drop force_probe requirement")
Signed-off-by: Jesus Narvaez <jesus.narvaez@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212190100.3768068-1-jesus.narvaez@intel.com
(cherry picked from commit ee5a1321df90891d59d83b7c9d5b6c5b755d059d)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
If devm_i2c_new_dummy_device() fails then we were supposed to return an
error code, but instead the function continues and will crash on the next
line. Add the missing return statement.
Fixes: 049723628716 ("drm/bridge: Add ITE IT6263 LVDS to HDMI converter")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/804a758b-f2e7-4116-b72d-29bc8905beed@stanley.mountain
|
|
After a job completes, the corresponding pointer in the device must
be set to NULL. Failing to do so triggers a warning when unloading
the driver, as it appears the job is still active. To prevent this,
assign the job pointer to NULL after completing the job, indicating
the job has finished.
Fixes: 14d1d1908696 ("drm/v3d: Remove the bad signaled() implementation.")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113154741.67520-1-mcanal@igalia.com
|
|
The "mmio_ext" and 'REG_EXT" code is currently unused on any existing
platform. Going forward, this also isn't the design we want to use for
any future platforms/features either, so we should just go ahead and
remove the dead code to avoid confusion.
mmio_ext was originally added in an attempt to hack around the early
(mis)design of the Xe driver, which used xe_gt as the target for all
register MMIO access, even those completely unrelated to the GT subunit
of the hardware. With the introduction of commit 34953ee349dd ("drm/xe:
Create dedicated xe_mmio structure") and its follow-up patches, that
misdesign has been corrected and access to register MMIO regions
specific to hardware units is now done through xe_mmio structures which
encapsulate an iomap, region size, and some other metadata.
Although all of the registers used by the driver today happen to fall
within one specific PCI BAR region, and thus re-use a single device-wide
iomap, there's no requirement that this stay true for future platforms
or features. I.e., if a future platform adds a new 'foo' hardware unit
that exists at a different area in the BAR, or even in a completely
different BAR, then that would be handled by doing a separate iomap of
that unit's register region and wrapping it in its own 'struct xe_mmio
foo_regs' structure. The pointer to the new 'foo_regs' could be placed
within the xe_device, xe_tile, xe_gt, etc., according to where the new
hardware unit falls within the current hardware hierarchy.
This effectively reverts the following commits, although parts of these
commits had already vanished or changed with the earlier xe_mmio
refactor work:
- commit 399a13323f0d ("drm/xe: add 28-bit address support in struct
xe_reg")
- commit fdef72e02e20 ("drm/xe: add a flag to bypass multi-tile config
from MTCFG reg")
- commit 866b2b176434 ("drm/xe: add MMIO extension support flags")
- commit ef29b390c734 ("drm/xe: map MMIO BAR according to the num of
tiles in device desc")
- commit a4e2f3a299ea ("drm/xe: refactor xe_mmio_probe_tiles to support
MMIO extension")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Koby Elbaz <kelbaz@habana.ai>
Acked-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Reviewed-by: Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250106234312.2986065-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
CPU jobs, like Cache Clean jobs, execute synchronously once the DRM
scheduler starts running them. Consequently, a global `v3d->cpu_job`
variable is unnecessary, as everything is managed within the
`v3d_cpu_job_run()` function.
This commit removes the `v3d->cpu_job` pointer, as it is not needed.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113154741.67520-2-mcanal@igalia.com
|
|
Adds a new BO param that keeps the reservation locked after creation.
This removes the need to re-reserve the BO after creation which is a
waste of cycles.
This also fixes a bug in vmw_prime_import_sg_table where the imported
reservation is unlocked twice.
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Fixes: b32233acceff ("drm/vmwgfx: Fix prime import/export")
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110185335.15301-1-ian.forbes@broadcom.com
|
|
Unused since commit a78a8da51b36
("drm/ttm: replace busy placement with flags v6")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250108201355.2521070-1-ian.forbes@broadcom.com
|
|
Unlock BOs in reverse order.
Add an acquire context so that lockdep doesn't complain.
Fixes: d6667f0ddf46 ("drm/vmwgfx: Fix handling of dumb buffers")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210195535.2074918-1-ian.forbes@broadcom.com
|
|
The recently introduced hotplug event handler in the HDMI Connector
framework attempts to unconditionally read the EDID data, leading to a
bunch of non-harmful, yet quite annoying DDC/I2C related errors being
reported.
Ensure the operation is done only for connectors having the status
connected or unknown. Additionally, perform an explicit reset of the
connector information when dealing with a disconnected status.
Fixes: ab716b74dc9d ("drm/display/hdmi: implement hotplug functions")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113-hdmi-conn-edid-read-fix-v2-1-d2a0438a44ab@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Atomic check should succeed when disabling a connector. Add a test
case drm_test_check_disabling_connector() to make sure of this.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110084821.3239518-3-victor.liu@nxp.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's ok to pass atomic check successfully if an atomic commit tries to
disable the display pipeline which the connector belongs to. That is,
when the crtc or the best_encoder pointers in struct drm_connector_state
are NULL, drm_atomic_helper_connector_hdmi_check() should return 0.
Without the check against the NULL pointers, drm_default_rgb_quant_range()
called by drm_atomic_helper_connector_hdmi_check() would dereference
the NULL pointer to_match in drm_match_cea_mode().
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
drm_default_rgb_quant_range+0x0/0x4c (P)
drm_bridge_connector_atomic_check+0x20/0x2c
drm_atomic_helper_check_modeset+0x488/0xc78
drm_atomic_helper_check+0x20/0xa4
drm_atomic_check_only+0x4b8/0x984
drm_atomic_commit+0x48/0xc4
drm_framebuffer_remove+0x44c/0x530
drm_mode_rmfb_work_fn+0x7c/0xa0
process_one_work+0x150/0x294
worker_thread+0x2dc/0x3dc
kthread+0x130/0x204
ret_from_fork+0x10/0x20
Fixes: 8ec116ff21a9 ("drm/display: bridge_connector: provide atomic_check for HDMI bridges")
Fixes: 84e541b1e58e ("drm/sun4i: use drm_atomic_helper_connector_hdmi_check()")
Fixes: 65548c8ff0ab ("drm/rockchip: inno_hdmi: Switch to HDMI connector")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110084821.3239518-2-victor.liu@nxp.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
FW attestation was disabled on MP0_14_0_{2/3}.
V2:
Move check into is_fw_attestation_support func. (Frank)
Remove DRM_WARN log info. (Alex)
Fix format. (Christian)
Signed-off-by: Gui Chengming <Jack.Gui@amd.com>
Reviewed-by: Frank.Min <Frank.Min@amd.com>
Reviewed-by: Christian König <Christian.Koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 62952a38d9bcf357d5ffc97615c48b12c9cd627c)
Cc: stable@vger.kernel.org # 6.12.x
|
|
That is needed to enforce isolation between contexts.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit def59436fb0d3ca0f211d14873d0273d69ebb405)
Cc: stable@vger.kernel.org
|
|
Disable gfxoff with the compute workload on gfx12. This is a
workaround for the opencl test failure.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2affe2bbc997b3920045c2c434e480c81a5f9707)
Cc: stable@vger.kernel.org # 6.12.x
|
|
This commit addresses a circular locking dependency issue within the GFX
isolation mechanism. The problem was identified by a warning indicating
a potential deadlock due to inconsistent lock acquisition order.
- The `amdgpu_gfx_enforce_isolation_ring_begin_use` and
`amdgpu_gfx_enforce_isolation_ring_end_use` functions previously
acquired `enforce_isolation_mutex` and called `amdgpu_gfx_kfd_sch_ctrl`,
leading to potential deadlocks. ie., If `amdgpu_gfx_kfd_sch_ctrl` is
called while `enforce_isolation_mutex` is held, and
`amdgpu_gfx_enforce_isolation_handler` is called while `kfd_sch_mutex` is
held, it can create a circular dependency.
By ensuring consistent lock usage, this fix resolves the issue:
[ 606.297333] ======================================================
[ 606.297343] WARNING: possible circular locking dependency detected
[ 606.297353] 6.10.0-amd-mlkd-610-311224-lof #19 Tainted: G OE
[ 606.297365] ------------------------------------------------------
[ 606.297375] kworker/u96:3/3825 is trying to acquire lock:
[ 606.297385] ffff9aa64e431cb8 ((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)){+.+.}-{0:0}, at: __flush_work+0x232/0x610
[ 606.297413]
but task is already holding lock:
[ 606.297423] ffff9aa64e432338 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}, at: amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu]
[ 606.297725]
which lock already depends on the new lock.
[ 606.297738]
the existing dependency chain (in reverse order) is:
[ 606.297749]
-> #2 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}:
[ 606.297765] __mutex_lock+0x85/0x930
[ 606.297776] mutex_lock_nested+0x1b/0x30
[ 606.297786] amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu]
[ 606.298007] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu]
[ 606.298225] amdgpu_ring_alloc+0x48/0x70 [amdgpu]
[ 606.298412] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu]
[ 606.298603] amdgpu_job_run+0xac/0x1e0 [amdgpu]
[ 606.298866] drm_sched_run_job_work+0x24f/0x430 [gpu_sched]
[ 606.298880] process_one_work+0x21e/0x680
[ 606.298890] worker_thread+0x190/0x350
[ 606.298899] kthread+0xe7/0x120
[ 606.298908] ret_from_fork+0x3c/0x60
[ 606.298919] ret_from_fork_asm+0x1a/0x30
[ 606.298929]
-> #1 (&adev->enforce_isolation_mutex){+.+.}-{3:3}:
[ 606.298947] __mutex_lock+0x85/0x930
[ 606.298956] mutex_lock_nested+0x1b/0x30
[ 606.298966] amdgpu_gfx_enforce_isolation_handler+0x87/0x370 [amdgpu]
[ 606.299190] process_one_work+0x21e/0x680
[ 606.299199] worker_thread+0x190/0x350
[ 606.299208] kthread+0xe7/0x120
[ 606.299217] ret_from_fork+0x3c/0x60
[ 606.299227] ret_from_fork_asm+0x1a/0x30
[ 606.299236]
-> #0 ((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)){+.+.}-{0:0}:
[ 606.299257] __lock_acquire+0x16f9/0x2810
[ 606.299267] lock_acquire+0xd1/0x300
[ 606.299276] __flush_work+0x250/0x610
[ 606.299286] cancel_delayed_work_sync+0x71/0x80
[ 606.299296] amdgpu_gfx_kfd_sch_ctrl+0x287/0x4d0 [amdgpu]
[ 606.299509] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu]
[ 606.299723] amdgpu_ring_alloc+0x48/0x70 [amdgpu]
[ 606.299909] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu]
[ 606.300101] amdgpu_job_run+0xac/0x1e0 [amdgpu]
[ 606.300355] drm_sched_run_job_work+0x24f/0x430 [gpu_sched]
[ 606.300369] process_one_work+0x21e/0x680
[ 606.300378] worker_thread+0x190/0x350
[ 606.300387] kthread+0xe7/0x120
[ 606.300396] ret_from_fork+0x3c/0x60
[ 606.300406] ret_from_fork_asm+0x1a/0x30
[ 606.300416]
other info that might help us debug this:
[ 606.300428] Chain exists of:
(work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work) --> &adev->enforce_isolation_mutex --> &adev->gfx.kfd_sch_mutex
[ 606.300458] Possible unsafe locking scenario:
[ 606.300468] CPU0 CPU1
[ 606.300476] ---- ----
[ 606.300484] lock(&adev->gfx.kfd_sch_mutex);
[ 606.300494] lock(&adev->enforce_isolation_mutex);
[ 606.300508] lock(&adev->gfx.kfd_sch_mutex);
[ 606.300521] lock((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work));
[ 606.300536]
*** DEADLOCK ***
[ 606.300546] 5 locks held by kworker/u96:3/3825:
[ 606.300555] #0: ffff9aa5aa1f5d58 ((wq_completion)comp_1.1.0){+.+.}-{0:0}, at: process_one_work+0x3f5/0x680
[ 606.300577] #1: ffffaa53c3c97e40 ((work_completion)(&sched->work_run_job)){+.+.}-{0:0}, at: process_one_work+0x1d6/0x680
[ 606.300600] #2: ffff9aa64e463c98 (&adev->enforce_isolation_mutex){+.+.}-{3:3}, at: amdgpu_gfx_enforce_isolation_ring_begin_use+0x1c3/0x5d0 [amdgpu]
[ 606.300837] #3: ffff9aa64e432338 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}, at: amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu]
[ 606.301062] #4: ffffffff8c1a5660 (rcu_read_lock){....}-{1:2}, at: __flush_work+0x70/0x610
[ 606.301083]
stack backtrace:
[ 606.301092] CPU: 14 PID: 3825 Comm: kworker/u96:3 Tainted: G OE 6.10.0-amd-mlkd-610-311224-lof #19
[ 606.301109] Hardware name: Gigabyte Technology Co., Ltd. X570S GAMING X/X570S GAMING X, BIOS F7 03/22/2024
[ 606.301124] Workqueue: comp_1.1.0 drm_sched_run_job_work [gpu_sched]
[ 606.301140] Call Trace:
[ 606.301146] <TASK>
[ 606.301154] dump_stack_lvl+0x9b/0xf0
[ 606.301166] dump_stack+0x10/0x20
[ 606.301175] print_circular_bug+0x26c/0x340
[ 606.301187] check_noncircular+0x157/0x170
[ 606.301197] ? register_lock_class+0x48/0x490
[ 606.301213] __lock_acquire+0x16f9/0x2810
[ 606.301230] lock_acquire+0xd1/0x300
[ 606.301239] ? __flush_work+0x232/0x610
[ 606.301250] ? srso_alias_return_thunk+0x5/0xfbef5
[ 606.301261] ? mark_held_locks+0x54/0x90
[ 606.301274] ? __flush_work+0x232/0x610
[ 606.301284] __flush_work+0x250/0x610
[ 606.301293] ? __flush_work+0x232/0x610
[ 606.301305] ? __pfx_wq_barrier_func+0x10/0x10
[ 606.301318] ? mark_held_locks+0x54/0x90
[ 606.301331] ? srso_alias_return_thunk+0x5/0xfbef5
[ 606.301345] cancel_delayed_work_sync+0x71/0x80
[ 606.301356] amdgpu_gfx_kfd_sch_ctrl+0x287/0x4d0 [amdgpu]
[ 606.301661] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu]
[ 606.302050] ? srso_alias_return_thunk+0x5/0xfbef5
[ 606.302069] amdgpu_ring_alloc+0x48/0x70 [amdgpu]
[ 606.302452] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu]
[ 606.302862] ? drm_sched_entity_error+0x82/0x190 [gpu_sched]
[ 606.302890] amdgpu_job_run+0xac/0x1e0 [amdgpu]
[ 606.303366] drm_sched_run_job_work+0x24f/0x430 [gpu_sched]
[ 606.303388] process_one_work+0x21e/0x680
[ 606.303409] worker_thread+0x190/0x350
[ 606.303424] ? __pfx_worker_thread+0x10/0x10
[ 606.303437] kthread+0xe7/0x120
[ 606.303449] ? __pfx_kthread+0x10/0x10
[ 606.303463] ret_from_fork+0x3c/0x60
[ 606.303476] ? __pfx_kthread+0x10/0x10
[ 606.303489] ret_from_fork_asm+0x1a/0x30
[ 606.303512] </TASK>
v2: Refactor lock handling to resolve circular dependency (Alex)
- Introduced a `sched_work` flag to defer the call to
`amdgpu_gfx_kfd_sch_ctrl` until after releasing
`enforce_isolation_mutex`.
- This change ensures that `amdgpu_gfx_kfd_sch_ctrl` is called outside
the critical section, preventing the circular dependency and deadlock.
- The `sched_work` flag is set within the mutex-protected section if
conditions are met, and the actual function call is made afterward.
- This approach ensures consistent lock acquisition order.
Fixes: afefd6f24502 ("drm/amdgpu: Implement Enforce Isolation Handler for KGD/KFD serialization")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0b6b2dd38336d5fd49214f0e4e6495e658e3ab44)
Cc: stable@vger.kernel.org
|
|
This commit enables the cleaner shader feature for GFX12.0 and GFX12.0.1
GPUs. The cleaner shader is important for clearing GPU resources such as
Local Data Share (LDS), Vector General Purpose Registers (VGPRs), and
Scalar General Purpose Registers (SGPRs) between workloads.
- This feature ensures that GPU resources are reset between workloads,
preventing data leaks and ensuring accurate computation.
By enabling the cleaner shader, this update enhances the security and
reliability of GPU operations on GFX12.0 hardware.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Mark options only meant to be used for debugging as unsafe so that the
kernel is tainted when they are used.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
FW attestation was disabled on MP0_14_0_{2/3}.
V2:
Move check into is_fw_attestation_support func. (Frank)
Remove DRM_WARN log info. (Alex)
Fix format. (Christian)
Signed-off-by: Gui Chengming <Jack.Gui@amd.com>
Reviewed-by: Frank.Min <Frank.Min@amd.com>
Reviewed-by: Christian König <Christian.Koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
That is needed to enforce isolation between contexts.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We sometimes have people trying to use debugging options in production
environments.
Mark options only meant to be used for debugging as unsafe so that the
kernel is tainted when they are used.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Lets use the existing helper instead of peeking into the structure
directly.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Disable gfxoff with the compute workload on gfx12. This is a
workaround for the opencl test failure.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
