| Age | Commit message (Collapse) | Author |
|---|
|
Even though there is usually only one CDM block, it can be
used by either HDMI, DisplayPort OR Writeback interfaces.
Hence its allocation needs to be tracked properly by the
resource manager to ensure appropriate availability of the
block.
changes in v2:
- move needs_cdm to topology struct
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571827/
Link: https://lore.kernel.org/r/20231212205254.12422-10-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add the RM APIs necessary to initialize and allocate CDM
blocks to be used by the rest of the DPU pipeline.
changes in v2:
- treat cdm_init() failure as fatal
- fixed the commit text
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571822/
Link: https://lore.kernel.org/r/20231212205254.12422-9-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
CDM block comes with its own set of registers and operations
which can be done. In-line with other hardware blocks, this
change adds the dpu_hw_cdm abstraction for the CDM block.
changes in v4:
- used FIELD_PREP() for dpu_hw_cdm_setup_cdwn() operations
- change to lowercase hex in dpu_hw_cdm_bind_pingpong_blk()
- move disable assignment inside else in dpu_hw_cdm_bind_pingpong_blk()
changes in v3:
- fix commit text from sub-blk to blk for CDM
- fix kbot issue for missing static for dpu_hw_cdm_enable()
- fix kbot issue for incorrect documentation style
- add more documentation for enums and struct in dpu_hw_cdm.h
- drop "enable" parameter from bind_pingpong_blk() as we can
just use PINGPONG_NONE for disable cases
- drop unnecessary bit operation for zero value of cdm_cfg
changes in v2:
- replace bit magic with relevant defines
- use drmm_kzalloc instead of kzalloc/free
- some formatting fixes
- inline _setup_cdm_ops()
- protect bind_pingpong_blk with core_rev check
- drop setup_csc_data() and setup_cdwn() ops as they
are merged into enable()
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312101815.B3ZH7Pfy-lkp@intel.com/
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571824/
Link: https://lore.kernel.org/r/20231212205254.12422-8-quic_abhinavk@quicinc.com
[DB: Added linux/bitfield.h inclusion]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add CDM blocks to the sm8250 dpu_hw_catalog to support
YUV format output from writeback block.
changes in v2:
- re-use the cdm definition from sc7280
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571819/
Link: https://lore.kernel.org/r/20231212205254.12422-7-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add CDM blocks to the sc7280 dpu_hw_catalog to support
YUV format output from writeback block.
changes in v3:
- change the comment from sub-blk to clk for CDM
changes in v2:
- remove explicit zero assignment for features
- move sc7280_cdm to dpu_hw_catalog from the sc7280
catalog file as its definition can be re-used
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571818/
Link: https://lore.kernel.org/r/20231212205254.12422-6-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Since the type and usage of CSC matrices is spanning across DPU
lets introduce a helper to the dpu_hw_util to return the CSC
corresponding to the request type. This will help to add more
supported CSC types such as the RGB to YUV one which is used in
the case of CDM.
changes in v3:
- drop the extra wrapper and export the matrices directly
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571816/
Link: https://lore.kernel.org/r/20231212205254.12422-5-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
For YUV cases, setting the required format bits was missed
out in the register programming. Lets fix it now in preparation
of adding YUV formats support for writeback.
changes in v2:
- dropped the fixes tag as its not a fix but adding
new functionality
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571814/
Link: https://lore.kernel.org/r/20231212205254.12422-4-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
dpu_encoder_phys_wb_setup_cdp() is not programming the chroma down
prefetch block. Its setting up the display ctl path for writeback.
Hence rename it to dpu_encoder_phys_wb_setup_ctl() to match what its
actually doing.
Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571812/
Link: https://lore.kernel.org/r/20231212205254.12422-3-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
In preparation for adding more formats to dpu writeback add
format validation to it to fail any unsupported formats.
changes in v4:
- change the failure message of the API
drm_atomic_helper_check_wb_connector_state() to a generic
one in case it checks more errors later and moreoever it
already has debug message to indicate its failure
- change the corresponding DPU_ERROR to DPU_DEBUG in-line with
other atomic_check failure messages
changes in v3:
- rebase on top of msm-next
- replace drm_atomic_helper_check_wb_encoder_state() with
drm_atomic_helper_check_wb_connector_state() due to the
rebase
changes in v2:
- correct some grammar in the commit text
Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/571811/
Link: https://lore.kernel.org/r/20231212205254.12422-2-quic_abhinavk@quicinc.com
[DB: removed extra debug message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The drmm handler will perform drm_encoder_cleanup() for us. Moreover if
we call drm_encoder_cleanup() manually, the drmm_encoder_alloc_release()
will spawn warnings at drivers/gpu/drm/drm_encoder.c:214. Drop these
extra drm_encoder_cleanup() calls.
Fixes: cd42c56d9c0b ("drm/msm/dpu: use drmm-managed allocation for dpu_encoder_virt")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> #sm8250 CI
Patchwork: https://patchwork.freedesktop.org/patch/571562/
Link: https://lore.kernel.org/r/20231211145440.3647001-1-dmitry.baryshkov@linaro.org
|
|
When we start getting these, we get a *lot*. So ratelimit it to not
flood dmesg.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/571584/
Link: https://lore.kernel.org/r/20231211182000.218088-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Enable WB2 hardware block, enabling writeback support on this platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/570187/
Link: https://lore.kernel.org/r/20231203002743.1291956-4-dmitry.baryshkov@linaro.org
|
|
Enable WB2 hardware block, enabling writeback support on this platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/570188/
Link: https://lore.kernel.org/r/20231203002743.1291956-3-dmitry.baryshkov@linaro.org
|
|
This can only happen when there is a reference counting bug.
v2: fix typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When freeing PD/PT with shadows it can happen that the shadow
destruction races with detaching the PD/PT from the VM causing a NULL
pointer dereference in the invalidation code.
Fix this by detaching the the PD/PT from the VM first and then
freeing the shadow instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: https://gitlab.freedesktop.org/drm/amd/-/issues/2867
Cc: <stable@vger.kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
commit 751e293f2c99 ("drm/amd: Move microcode init from sw_init to
early_init for SDMA v2.4") made a fateful mistake in
`adev->sdma.num_instances` wasn't declared when sdma_v2_4_init_microcode()
was run. This caused probing to fail.
Move the declaration to right before sdma_v2_4_init_microcode().
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3043
Fixes: 751e293f2c99 ("drm/amd: Move microcode init from sw_init to early_init for SDMA v2.4")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add begin/end_use ring callbacks to disallow GFXOFF when
SDMA work is submitted and allow it again afterward.
This should avoid corner cases where GFXOFF is erroneously
entered when SDMA is still active. For now just allow/disallow
GFXOFF in the begin and end helpers until we root cause the
issue. This should not impact power as SDMA usage is pretty
minimal and GFXOSS should not be active when SDMA is active
anyway, this just makes it explicit.
v2: move everything into sdma5.2 code. No reason for this
to be generic at this point.
v3: Add comments in new code
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2220
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> (v1)
Tested-by: Mario Limonciello <mario.limonciello@amd.com> (v1)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.15+
|
|
This can only happen when there is a reference counting bug.
v2: fix typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix to avoid multiple debug error lines printed on every suspend by Radeon driver's debugfs.
radeon_debugfs_init() calls debugfs_create_file() for every ring.
This results in printing multiple error lines to the screen and dmesg similar to this:
[ 92.378726] debugfs: File 'radeon_ring_gfx' in directory '0000:00:01.0' already present!
[ 92.378732] debugfs: File 'radeon_ring_cp1' in directory '0000:00:01.0' already present!
[ 92.378734] debugfs: File 'radeon_ring_cp2' in directory '0000:00:01.0' already present!
[ 92.378737] debugfs: File 'radeon_ring_dma1' in directory '0000:00:01.0' already present!
[ 92.378739] debugfs: File 'radeon_ring_dma2' in directory '0000:00:01.0' already present!
[ 92.380775] debugfs: File 'radeon_ring_uvd' in directory '0000:00:01.0' already present!
[ 92.406620] debugfs: File 'radeon_ring_vce1' in directory '0000:00:01.0' already present!
[ 92.406624] debugfs: File 'radeon_ring_vce2' in directory '0000:00:01.0' already present!
Patch v1: The fix was to run lookup() for the file before trying to (re)create that debug file.
Patch v2: Call the radeon_debugfs_init() only once when radeon ring is initialized (as suggested
by Christian K. - thanks)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Woody Suwalski <terraluna977@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable usage of predefined transfer func in addition to shaper 1D LUT.
That means we can save some complexity by just setting a predefined
curve, instead of programming a custom curve when preparing color space
for applying 3D LUT.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Map DC shaper LUT to DM plane color management. Shaper LUT can be used
to delinearize and/or normalize the color space for computational
efficiency and achiving specific visual styles. If a plane degamma is
apply to linearize the color space, a custom shaper 1D LUT can be used
just before applying 3D LUT.
v2:
- use DPP color caps to verify plane 3D LUT support
- add debug message if shaper LUT programming fails
v4:
- remove helper to check 3D LUT color caps (Harry)
- update desc of lut3d-setup helper from MPC to DPP
v5:
- remove color_mgmt_changed check that prevents color updates (Joshua)
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
With `dc_fixpt_from_s3132()` translation, we can just use it to set
hdr_mult.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Detach value translation from CTM to reuse it for programming HDR
multiplier property.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DC only has pre-blending degamma caps (plane/DPP) that is currently in
use for CRTC/post-blending degamma, so that we don't have HW caps to
perform plane and CRTC degamma at the same time. Reject atomic updates
when serspace sets both plane and CRTC degamma properties.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set DC plane with user degamma LUT or predefined TF from driver-specific
plane color properties. If plane and CRTC degamma are set in the same
time, plane degamma has priority. That means, we only set CRTC degamma
if we don't have plane degamma LUT or TF to configure. We return -EINVAL
if we don't have plane degamma settings, so we can continue and check
CRTC degamma.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When freeing PD/PT with shadows it can happen that the shadow
destruction races with detaching the PD/PT from the VM causing a NULL
pointer dereference in the invalidation code.
Fix this by detaching the the PD/PT from the VM first and then
freeing the shadow instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: https://gitlab.freedesktop.org/drm/amd/-/issues/2867
Cc: <stable@vger.kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The next patch adds pre-blending degamma to AMD color mgmt pipeline, but
pre-blending degamma caps (DPP) is currently in use to provide DRM CRTC
atomic degamma or implict degamma on legacy gamma. Detach degamma usage
regarging CRTC color properties to manage plane and CRTC color
correction combinations.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We should reset a plane state if at least one of the color management
properties differs from old and new state.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Co-developed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Otherwise this is just initialized to 0. This needs to actually have a
value so that compute_curve can work for PQ EOTF.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Co-developed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Including drm_edid.h from amdgpu_mode.h causes the rebuild of literally
hundreds of files when drm_edid.h is modified, while there are only a
handful of files that actually need to include drm_edid.h.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add predefined transfer function programming. There is no post-blending
out gamma ROM for hardcoded curves, but we can use AMD color modules to
program LUT parameters from pre-defined coefficients and an empty
regamma LUT (or bump up LUT parameters with pre-defined TF values).
v2:
- update crtc color mgmt if regamma TF differs between states (Joshua)
- map inverse EOTF to DC transfer function (Melissa)
v3:
- update AMDGPU TF list
v4:
- update comment regarding regamma behavior
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Co-developed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We will wire up MPC 3D LUT to DM CRTC color pipeline in the next patch,
but so far, only for atomic interface. By checking
set_output_transfer_func in DC drivers with MPC 3D LUT support, we can
verify that regamma is only programmed when 3D LUT programming fails. As
a groundwork to introduce 3D LUT programming and better understand each
step, detach atomic regamma programming from the crtc colocr updating
code.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Describe some expected behavior of the AMD DM color mgmt programming.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add AMD pre-defined transfer function property to default DRM CRTC gamma
to convert to wire encoding with or without a user gamma LUT. There is
no post-blending regamma ROM for pre-defined TF. When setting Gamma TF
(!= Identity) and LUT at the same time, the color module will combine
the pre-defined TF and the custom LUT values into the LUT that's
actually programmed.
v2:
- enable CRTC prop in the end of driver-specific prop sequence
- define inverse EOTFs as supported regamma TFs
- reword driver-specific function doc to remove shaper/3D LUT
v3:
- spell out TF+LUT behavior in the commit and comments (Harry)
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Co-developed-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Blend 1D LUT or a pre-defined transfer function (TF) can be set to
linearize content before blending, so that it's positioned just before
blending planes in the AMD color mgmt pipeline, and after 3D LUT
(non-linear space). Shaper and Blend LUTs are 1D LUTs that sandwich 3D
LUT. Drivers should advertize blend properties according to HW caps.
There is no blend ROM for pre-defined TF. When setting blend TF (!=
Identity) and LUT at the same time, the color module will combine the
pre-defined TF and the custom LUT values into the LUT that's actually
programmed.
v3:
- spell out TF+LUT behavior in the commit and comments (Harry)
v5:
- get blend blob correctly
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On AMD HW, 3D LUT always assumes a preceding shaper 1D LUT used for
delinearizing and/or normalizing the color space before applying a 3D
LUT. Add pre-defined transfer function to enable delinearizing content
with or without shaper LUT, where AMD color module calculates the
resulted shaper curve. We apply an inverse EOTF to go from linear
values to encoded values. If we are already in a non-linear space and/or
don't need to normalize values, we can bypass shaper LUT with a linear
transfer function that is also the default TF value.
There is no shaper ROM. When setting shaper TF (!= Identity) and LUT at
the same time, the color module will combine the pre-defined TF and the
custom LUT values into the LUT that's actually programmed.
v2:
- squash commits for shaper LUT and shaper TF
- define inverse EOTF as supported shaper TFs
v3:
- spell out TF+LUT behavior in the commit and comments (Harry)
- replace BT709 EOTF by inv OETF
v5:
- get shaper blob correctly (Joshua)
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MES provides the driver a call to explicitly flush stale process memory
within the MES to avoid a race condition that results in a fatal
memory violation.
When SET_SHADER_DEBUGGER is called, the driver passes a memory address
that represents a process context address MES uses to keep track of
future per-process calls.
Normally, MES will purge its process context list when the last queue
has been removed. The driver, however, can call SET_SHADER_DEBUGGER
regardless of whether a queue has been added or not.
If SET_SHADER_DEBUGGER has been called with no queues as the last call
prior to process termination, the passed process context address will
still reside within MES.
On a new process call to SET_SHADER_DEBUGGER, the driver may end up
passing an identical process context address value (based on per-process
gpu memory address) to MES but is now pointing to a new allocated buffer
object during KFD process creation. Since the MES is unaware of this,
access of the passed address points to the stale object within MES and
triggers a fatal memory violation.
The solution is for KFD to explicitly flush the process context address
from MES on process termination.
Note that the flush call and the MES debugger calls use the same MES
interface but are separated as KFD calls to avoid conflicting with each
other.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Alice Wong <shiwei.wong@amd.com>
Reviewed-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
commit 751e293f2c99 ("drm/amd: Move microcode init from sw_init to
early_init for SDMA v2.4") made a fateful mistake in
`adev->sdma.num_instances` wasn't declared when sdma_v2_4_init_microcode()
was run. This caused probing to fail.
Move the declaration to right before sdma_v2_4_init_microcode().
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3043
Fixes: 751e293f2c99 ("drm/amd: Move microcode init from sw_init to early_init for SDMA v2.4")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Instead of software managed counters.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add 3D LUT property for plane color transformations using a 3D lookup
table. 3D LUT allows for highly accurate and complex color
transformations and is suitable to adjust the balance between color
channels. It's also more complex to manage and require more
computational resources.
Since a 3D LUT has a limited number of entries in each dimension we want
to use them in an optimal fashion. This means using the 3D LUT in a
colorspace that is optimized for human vision, such as sRGB, PQ, or
another non-linear space. Therefore, userpace may need one 1D LUT
(shaper) before it to delinearize content and another 1D LUT after 3D
LUT (blend) to linearize content again for blending. The next patches
add these 1D LUTs to the plane color mgmt pipeline.
v3:
- improve commit message about 3D LUT
- describe the 3D LUT entries and size (Harry)
v4:
- advertise 3D LUT max size as the size of a single-dimension
v5:
- get lut3d blob correctly (Joshua)
- fix doc about 3d-lut dimension size (Sebastian)
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Including drm_edid.h from radeon_mode.h causes the rebuild of more than
a hundred files when drm_edid.h is modified, while there are only a
handful of files that actually need to include drm_edid.h.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This improves latency if the GPU is already busy with other work.
This is useful for VR compositors that submit highly latency-sensitive
compositing work on high-priority compute queues while the GPU is busy
rendering the next frame.
Userspace merge request:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26462
v2: bump driver version (Alex)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add begin/end_use ring callbacks to disallow GFXOFF when
SDMA work is submitted and allow it again afterward.
This should avoid corner cases where GFXOFF is erroneously
entered when SDMA is still active. For now just allow/disallow
GFXOFF in the begin and end helpers until we root cause the
issue. This should not impact power as SDMA usage is pretty
minimal and GFXOSS should not be active when SDMA is active
anyway, this just makes it explicit.
v2: move everything into sdma5.2 code. No reason for this
to be generic at this point.
v3: Add comments in new code
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2220
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> (v1)
Tested-by: Mario Limonciello <mario.limonciello@amd.com> (v1)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.15+
|
|
Fulfill the SMU13.0.7 support for Wifi RFI mitigation feature.
--
v10->v11:
- downgrade the prompt level on message failure(Lijo)
v13:
- Fix the format issue (IIpo Jarvinen)
- Remove duplicate code (IIpo Jarvinen)
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fulfill the SMU13.0.0 support for Wifi RFI mitigation feature.
--
v10->v11:
- downgrade the prompt level on message failure(Lijo)
v13:
- Fix the format issue (IIpo Jarvinen)
- Move function smu_v13_0_0_set_wbrf_exclusion_ranges to
smu_v13_0.c as a generic code for later use (IIpo Jarvinen)
Co-developed-by: Evan Quan <quanliangl@hotmail.com>
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To protect PMFW from being overloaded.
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
With WBRF feature supported, as a driver responding to the frequencies,
amdgpu driver is able to do shadow pstate switching to mitigate possible
interference(between its (G-)DDR memory clocks and local radio module
frequency bands used by Wifi 6/6e/7).
--
v1->v2:
- update the prompt for feature support(Lijo)
v8->v9:
- update parameter document for smu_wbrf_event_handler(Simon)
v9->v10:
v10->v11:
- correct the logics for wbrf range sorting(Lijo)
v13:
- Fix the format issue (IIpo Jarvinen)
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add those data structures to support Wifi RFI mitigation feature.
Signed-off-by: Evan Quan <quanliangl@hotmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use drm_gem_prime_fd_to_handle to import DMABufs for interop. This
ensures that a GEM handle is created on import and that obj->dma_buf
will be set and remain set as long as the object is imported into KFD.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Xiaogang.Chen <Xiaogang.Chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Create GEM handles for exporting DMABufs using GEM-Prime APIs. The GEM
handles are created in a drm_client_dev context to avoid exposing them
in user mode contexts through a DMABuf import.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
