| Age | Commit message (Collapse) | Author |
|---|
|
Only execute IMU related functions if dpm>0.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
support imu related function for gfx v12.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Split PFF/ME/MEC firmware address setting function
from related load microcode funtion, as it's also
needed for rlc autolad.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Initial support for GFX 12.
v1: Add gfx v12_0 ip block support. (Likun)
v2: Switch to gfx.kiq array.
Move the vmhub from ring callback to ring. (Hawking)
v3: Update various callback function impl. (Hawking)
v4: Warning fixes (Alex)
v5: squash in imu fix, csb, rlc autoload implementations (Alex)
v6: Rebase (Alex)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enlarge the data cache boundary.
v2: use the fix data cache boundary.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix request to MES to set SQ_SHADER_TBA_HI.trap_en for GFX12.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On MES12, HW can monitor up to 2048 doorbells that not be
mapped currently and trigger the interrupt to MES when these unmapped
doorbell been ringed.
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. fix available compute queue to use
2. enable mes v12 self test
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Split the function of mes fimrware address setting
from mes firmware load for mes v12, as it's also
needed for rlc autoload.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v1: Add mes v12_0 ip block support. (Jack)
v2: Switch to gfx.kiq array. (Hawking)
v3: Switch to AMDGPU_GFXHUB(0). (Hawking)
v4: Rebase (Alex)
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Keep gfx v12 mes fw name to gc_12_x_x_mes.bin
and gc_12_x_x_mes1.bin.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add MES_v12 header definition for gfx12
v2: Modify SET_SHADER_DEBUGGER to match mes_v11 definition. This doesn't
change the structure layout
v3: Removed unncessary comment and spaces
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add RLC autoload TOC header file for soc24 ASIC.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add new RLC_TABLE_OF_CONTENT structure definition.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add gfx12 clearstate register arrays.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set GC family for GC 12.0 IPs.
v2: squash in updates (Alex)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
VCN5 session info package interface changed
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add gfx v9_4_4 ip block support
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add smu v13_0_14 ip block support
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add psp v13_0_14 ip block support.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add sdma v4_4_5 ip block support
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Override DCN IP version to 4.0.1 from 4.1.0 temporarily until change is
made in DC codebase to use 4.1.0
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Observed on gfx8 ASIC where KFD_IOC_ALLOC_MEM_FLAGS_AQL_QUEUE_MEM is used.
Two attachments use the same VM, root PD would be locked twice.
[ 57.910418] Call Trace:
[ 57.793726] ? reserve_bo_and_cond_vms+0x111/0x1c0 [amdgpu]
[ 57.793820] amdgpu_amdkfd_gpuvm_unmap_memory_from_gpu+0x6c/0x1c0 [amdgpu]
[ 57.793923] ? idr_get_next_ul+0xbe/0x100
[ 57.793933] kfd_process_device_free_bos+0x7e/0xf0 [amdgpu]
[ 57.794041] kfd_process_wq_release+0x2ae/0x3c0 [amdgpu]
[ 57.794141] ? process_scheduled_works+0x29c/0x580
[ 57.794147] process_scheduled_works+0x303/0x580
[ 57.794157] ? __pfx_worker_thread+0x10/0x10
[ 57.794160] worker_thread+0x1a2/0x370
[ 57.794165] ? __pfx_worker_thread+0x10/0x10
[ 57.794167] kthread+0x11b/0x150
[ 57.794172] ? __pfx_kthread+0x10/0x10
[ 57.794177] ret_from_fork+0x3d/0x60
[ 57.794181] ? __pfx_kthread+0x10/0x10
[ 57.794184] ret_from_fork_asm+0x1b/0x30
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is part of the reset, move it into the reset function.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdxcp is a platform driver for creating partition devices. libdrm
library identifies a platform device based on 'OF_FULLNAME' or
'MODALIAS'. If two or more devices have the same platform name, drm
library only picks the first device. Platform driver core uses name of
the device to populate 'MODALIAS'. When 'amdgpu_xcp' is used as the base
name, only first partition device gets identified. Assign unique name so
that drm library identifies partition devices separately.
amdxcp doesn't support probe of partitions, it doesn't bother about
modaliases.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some version of BIOS does not enable all clock levels,
resulting in high level clock frequency of 0.
The number of valid CLKs must be confirmed in advance.
Signed-off-by: Peyton Lee <peytolee@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit removes an unnecessary NULL check in the
`dcn10_set_input_transfer_func` function in the `dcn10_hwseq.c` file.
The variable `tf` is assigned the address of
`plane_state->in_transfer_func` unconditionally, so it can never be
`NULL`. Therefore, the check `if (tf == NULL)` is unnecessary and has
been removed.
Fixes the below smatch warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1839 dcn10_set_input_transfer_func() warn: address of 'plane_state->in_transfer_func' is non-NULL
Fixes: 285a7054bf81 ("drm/amd/display: Remove plane and stream pointers from dc scratch")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit removes a redundant NULL check in the
`dce110_set_input_transfer_func` function in the `dce110_hwseq.c` file.
The variable `tf` is assigned the address of
`plane_state->in_transfer_func` unconditionally, so it can never be
`NULL`. Therefore, the check `if (tf == NULL)` is unnecessary and has
been removed.
Fixes the below smatch warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dce110/dce110_hwseq.c:301 dce110_set_input_transfer_func() warn: address of 'plane_state->in_transfer_func' is non-NULL
Fixes: 285a7054bf81 ("drm/amd/display: Remove plane and stream pointers from dc scratch")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The retry loop for SRIOV reset have refcount and memory leak issue.
Depending on which function call fails it can potentially call
amdgpu_amdkfd_pre/post_reset different number of times and causes
kfd_locked count to be wrong. This will block all future attempts at
opening /dev/kfd. The retry loop also leakes resources by calling
amdgpu_virt_init_data_exchange multiple times without calling the
corresponding fini function.
Align with the bare-metal reset path which doesn't have these issues.
This means taking the amdgpu_amdkfd_pre/post_reset functions out of the
reset loop and calling amdgpu_device_pre_asic_reset each retry which
properly free the resources from previous try by calling
amdgpu_virt_fini_data_exchange.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable initializing Display Manager for DCN410 IP
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are other reset sources that pass NULL as the job pointer, such as
amdgpu_amdkfd_reset_work. Therefore, using the job pointer to check if
the FLR comes from the host does not work.
Add a flag in reset_context to explicitly mark host triggered reset, and
set this flag when we receive host reset notification.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some times a hang GPU causes multiple reset sources to schedule resets.
The second source will be able to trigger an unnecessary reset if they
schedule after we call amdgpu_device_stop_pending_resets.
Move amdgpu_device_stop_pending_resets to after the reset is done. Since
at this point the GPU is supposedly in a good state, any reset scheduled
after this point would be a legitimate reset.
Remove unnecessary and incorrect checks for amdgpu_in_reset that was
kinda serving this purpose.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
increase retry times to wait host has enough time to complete reset.
Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
VF can't access FB when host is doing mode1 reset. Using sizeof to get
vf2pf info size, instead of reading it from vf2pf header stored in FB.
Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These lines are indented too far. Clean the whitespace.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are various spelling mistakes in dml2_printf messages, fix them.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add_margin_and_round_to_dfs_grainularity()
When building with clang 19 or newer (which strengthened some of the
enum conversion warnings for C), there is a warning (or error with
CONFIG_WERROR=y) around doing arithmetic with an enumerated type and a
floating point expression.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_dpmm/dml2_dpmm_dcn4.c:181:58: error: arithmetic between enumeration type 'enum dentist_divider_range' and floating-point type 'double' [-Werror,-Wenum-float-conversion]
181 | divider = (unsigned int)(DFS_DIVIDER_RANGE_SCALE_FACTOR * (vco_freq_khz / clock_khz));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
This conversion is expected due to the nature of the enumerated value
and definition, so silence the warning by casting the enumeration to an
integer explicitly to make it clear to the compiler.
Fixes: 70839da63605 ("drm/amd/display: Add new DCN401 sources")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Panel replay was enabled by default in commit 5950efe25ee0
("drm/amd/display: Enable Panel Replay for static screen use case"), but
it isn't working properly at least on some BOE and AUO panels. Instead
of being static the screen is solid black when active. As it's a new
feature that was just introduced that regressed VRR disable it for now
so that problem can be properly root caused.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3344
Fixes: 5950efe25ee0 ("drm/amd/display: Enable Panel Replay for static screen use case")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In the post_reset function, if the fast reset didn't succeed, we
are not clearing the fast_reset flag, which prevents firmware
sections from being reloaded. While at it, use panthor_fw_stop()
instead of manually writing DISABLE to the MCU_CONTROL register.
Fixes: 2718d91816ee ("drm/panthor: Add the FW logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430113727.493155-1-boris.brezillon@collabora.com
|
|
What needs to be asserted is that the pattern fits in the number
of bits provided by the user in patternbits, otherwise it would
be truncated when replicated according to the mask, which is
likely not the intended use of this function.
The pattern argument is a bitmap so use find_last_bit() instead
of fls(). The bit position starts at index 0 so remove "or equal"
from the comparison. XE_MAX_L3_BANK_MASK_BITS would be the
returned value if the pattern is 0, which can be the case on some
platforms.
v2: Check the result does not overflow the array (Lucas De Marchi)
v3: Use __fls() for long and handle mask == 0 (Lucas De Marchi)
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502124311.159695-1-francois.dugast@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
When we check for state values returned by the FW, we only cover part of
the 0:7 range. Make sure we catch FW inconsistencies by adding a default
to the switch statement, and flagging the group state as unknown in that
case.
When an unknown state is detected, we trigger a reset, and consider the
group as unusable after that point, to prevent the potential corruption
from creeping in other places if we continue executing stuff on this
context.
v2:
- Add Steve's R-b
- Fix commit message
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/3b7fd2f2-679e-440c-81cd-42fc2573b515@moroto.mountain/T/#u
Suggested-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502155248.1430582-1-boris.brezillon@collabora.com
|
|
Contrary to i915, in xe ADL-N is kept as a different platform, not a
subplatform of ADL-P. Since the display side doesn't need to
differentiate between P and N, i.e. IS_ALDERLAKE_P_N() is never called,
just fixup the compat header to check for both P and N.
Moving ADL-N to be a subplatform would be more complex as the firmware
loading in xe only handles platforms, not subplatforms, as going forward
the direction is to check on IP version rather than
platforms/subplatforms.
Fix warning when initializing display:
xe 0000:00:02.0: [drm:intel_pch_type [xe]] Found Alder Lake PCH
------------[ cut here ]------------
xe 0000:00:02.0: drm_WARN_ON(!((dev_priv)->info.platform == XE_ALDERLAKE_S) && !((dev_priv)->info.platform == XE_ALDERLAKE_P))
And wrong paths being taken on the display side.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425181610.2704633-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 6a2a90cba12b42eb96c2af3426b77ceb4be31df2)
Fixes: 44e694958b95 ("drm/xe/display: Implement display support")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
When you create a submenu using the 'menu' syntax, there is no
ambiguity about its end because the code between 'menu' and 'endmenu'
becomes the submenu.
In contrast, 'menuconfig' does not have the corresponding end marker.
Instead, the end of the submenu is inferred from symbol dependencies.
This is detailed in Documentation/kbuild/kconfig-language.rst, starting
line 348. It outlines two methods to place the code under the submenu:
(1) Open an if-block immediately after 'menuconfig', enclosing the
submenu content within it
(2) Add 'depends on' to every symbol intended for the submenu
Many subsystems opt for (1) because it reliably maintains the submenu
structure.
The DRM subsystem adopts (2). The submenu ends when the sequence of
'depends on DRM' breaks. It can be confirmed by running a GUI frontend
such as 'make menuconfig' and visiting the DRM menu:
< > Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) ----
If you toggle this, you will notice most of the DRM-related options
appear below it, not in the submenu.
I highly recommend the approach (1). Obviously, (2) is not reliable,
as the submenu breaks whenever someone forgets to add 'depends on DRM'.
This commit encloses the entire DRM configuration with 'if DRM' and
'endif', except for DRM_PANEL_ORIENTATION_QUIRKS.
Note:
Now, 'depends on DRM' properties inside the if-block are all redundant.
I leave it as follow-up cleanups.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426135602.2500125-1-masahiroy@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit d674858ff979550a0e97b4ac766f2640f0d9d7e7, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/3db958e3f4002e26cd963596d810c37feb315fb3.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit c0e0f139354c01e0213204e4a96e7076e5a3e396, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/bd93d43b07f8ed6368119f4a5ddac2ee80debe53.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit e075e496f516bf92bc0cbaf94d64e8d4a6b58321, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1ba76cc4d96a8afefff5d1bc42fb1e1329c5da68.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit 4d15125d7fe637f401e64e33c99513adf6586fdd, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/79824fec01eb9ab0673b9409f9b39cc8b5cc338d.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit 0323287de87d7e6e9c22c57d7440aa353a2298d0, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/89ac456805746b6d0c888f10c5120b11aacd3319.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit 3166e7e6d935caaef07605a5c90773fbf9ffeaf4, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/a40e70a0abd3d841c23c107d452a43fdd70ef37a.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
This reverts commit f6d2dc03fa8546b284dd8c1af027d9fac5725921, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/bd288a5943dab8609f2d1f2bf413595a61df727a.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
