| Age | Commit message (Collapse) | Author |
|---|
|
Use the _x16 suffix for all .4 fixed point variables. Drop compressed_
prefix, as it's implied from the precision suffix.
As dsc_min_bpp and dsc_max_bpp change domain from int to .4 in the
middle of the function, they remain the same for now.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/91dd6ef53683b624a978101cca7322ea3e5e2f7b.1738327620.git.jani.nikula@intel.com
|
|
Add a platform independent helper for getting the supported DSC BPP step
for the link.
v2: Use fxp_q4_from_int(1) (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131232815.2046237-1-jani.nikula@intel.com
|
|
Commit 1c56e9a39833 ("drm/i915/dp: Get optimal link config to have best
compressed bpp") tries to find the best compressed bpp for the
link. However, it iterates from max to min bpp on display 13+, and from
min to max on other platforms. This presumably leads to minimum
compressed bpp always being chosen on display 11-12.
Iterate from high to low on all platforms to actually use the best
possible compressed bpp.
Fixes: 1c56e9a39833 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: <stable@vger.kernel.org> # v6.7+
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3bba67923cbcd13a59d26ef5fa4bb042b13c8a9b.1738327620.git.jani.nikula@intel.com
|
|
The scale() functions detects invalid parameters, but continues
its calculations anyway. This causes bad results if negative values
are used for unsigned operations. Worst case, a division by 0 error
will be seen if source_min == source_max.
On top of that, after v6.13, the sequence of WARN_ON() followed by clamp()
may result in a build error with gcc 13.x.
drivers/gpu/drm/i915/display/intel_backlight.c: In function 'scale':
include/linux/compiler_types.h:542:45: error:
call to '__compiletime_assert_415' declared with attribute error:
clamp() low limit source_min greater than high limit source_max
This happens if the compiler decides to rearrange the code as follows.
if (source_min > source_max) {
WARN(..);
/* Do the clamp() knowing that source_min > source_max */
source_val = clamp(source_val, source_min, source_max);
} else {
/* Do the clamp knowing that source_min <= source_max */
source_val = clamp(source_val, source_min, source_max);
}
Fix the problem by evaluating the return values from WARN_ON and returning
immediately after a warning. While at it, fix divide by zero error seen
if source_min == source_max.
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: David Laight <david.laight.linux@gmail.com>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250121145203.2851237-1-linux@roeck-us.net
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 6f71507415841d1a6d38118e5fa0eaf0caab9c17)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently, intel_dp_dsc_max_src_input_bpc can return 0 for platforms not
supporting DSC, which could theoretically cause issues in clamp()
due to a low limit being greater than the high limit.
Instead, return the minimum bpc supported by the source to prevent
such issues.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYtNfM399_=_ff81zeRJv=0+z7oFJfPGmJgTp6yrJmU+1w@mail.gmail.com/
Fixes: 160672b86b0d ("drm/i915/dp: Use clamp for pipe_bpp limits with DSC")
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131041342.3086716-1-ankit.k.nautiyal@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit a67221b5eb8d59fb7e1f0df3ef9945b6a0f32cca)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently we support Adaptive sync operation mode with dynamic frame
rate, but instead the operation mode with fixed rate is set.
This was initially set correctly in the earlier version of changes but
later got changed, while defining a macro for the same.
Fixes: a5bd5991cb8a ("drm/i915/display: Compute AS SDP parameters")
Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250130051609.1796524-4-mitulkumar.ajitkumar.golani@intel.com
(cherry picked from commit c5806862543ff6c2ad242409fcdf0667eac26dae)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
After the context is unpinned the backing memory can also be unpinned,
so any accesses via the lrc_reg_state pointer can end up in unmapped
memory. To avoid that, make sure to only access that memory if the
context is pinned when printing its info.
v2: fix newline alignment
Fixes: 28ff6520a34d ("drm/i915/guc: Update GuC debugfs to support new GuC")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v5.15+
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115001334.3875347-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 5bea40687c5cf2a33bf04e9110eb2e2b80222ef5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
I'm seeing underruns with these 64bpp YUV formats on TGL.
The weird details:
- only happens on pipe B/C/D SDR planes, pipe A SDR planes
seem fine, as do all HDR planes
- somehow CDCLK related, higher CDCLK allows for bigger plane
with these formats without underruns. With 300MHz CDCLK I
can only go up to 1200 pixels wide or so, with 650MHz even
a 3840 pixel wide plane was OK
- ICL and ADL so far appear unaffected
So not really sure what's the deal with this, but bspec does
state "64-bit formats supported only on the HDR planes" so
let's just drop these formats from the SDR planes. We already
disallow 64bpp RGB formats.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218173650.19782-2-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
(cherry picked from commit 35e1aacfe536d6e8d8d440cd7155366da2541ad4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
When converting to folios the cleanup path of shmem_get_pages() was
missed. When a DMA remap fails and the max segment size is greater than
PAGE_SIZE it will attempt to retry the remap with a PAGE_SIZEd segment
size. The cleanup code isn't properly using the folio apis and as a
result isn't handling compound pages correctly.
v2 -> v3:
(Ville) Just use shmem_sg_free_table() as-is in the failure path of
shmem_get_pages(). shmem_sg_free_table() will clear mapping unevictable
but it will be reset when it retries in shmem_sg_alloc_table().
v1 -> v2:
(Ville) Fixed locations where we were not clearing mapping unevictable.
Cc: stable@vger.kernel.org
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Vidya Srinivas <vidya.srinivas@intel.com>
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13487
Link: https://lore.kernel.org/lkml/20250116135636.410164-1-bgeffon@google.com/
Fixes: 0b62af28f249 ("i915: convert shmem_sg_free_table() to use a folio_batch")
Signed-off-by: Brian Geffon <bgeffon@google.com>
Suggested-by: Tomasz Figa <tfiga@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250127204332.336665-1-bgeffon@google.com
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 9e304a18630875352636ad52a3d2af47c3bde824)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
When running igt@gem_exec_balancer@individual for multiple iterations,
it is seen that the delta busyness returned by PMU is 0. The issue stems
from a combination of 2 implementation specific details:
1) gt_park is throttling __update_guc_busyness_stats() so that it does
not hog PCI bandwidth for some use cases. (Ref: 59bcdb564b3ba)
2) busyness implementation always returns monotonically increasing
counters. (Ref: cf907f6d29421)
If an application queried an engine while it was active,
engine->stats.guc.running is set to true. Following that, if all PM
wakeref's are released, then gt is parked. At this time the throttling
of __update_guc_busyness_stats() may result in a missed update to the
running state of the engine (due to (1) above). This means subsequent
calls to guc_engine_busyness() will think that the engine is still
running and they will keep updating the cached counter (stats->total).
This results in an inflated cached counter.
Later when the application runs a workload and queries for busyness, we
return the cached value since it is larger than the actual value (due to
(2) above)
All subsequent queries will return the same large (inflated) value, so
the application sees a delta busyness of zero.
Fix the issue by resetting the running state of engines each time
intel_guc_busyness_park() is called.
v2: (Rodrigo)
- Use the correct tag in commit message
- Drop the redundant wakeref check in guc_engine_busyness() and update
commit message
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13366
Fixes: cf907f6d2942 ("i915/guc: Ensure busyness counter increases motonically")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250123193839.2394694-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 431b742e2bfc9f6dd713f261629741980996d001)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Use intel_encoder_is_hdmi function which was recently introduced to
see if encoder is HDMI or not.
--v2
-Add Fixes tag [Jani]
Fixes: 6a3691ca4799 ("drm/i915/hdcp: Disable HDCP Line Rekeying for HDCP2.2 on HDMI")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117041247.1084381-1-suraj.kandpal@intel.com
(cherry picked from commit 2499212e21601740ed7d5563563f39cf7e7d833a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
When topology changes, before beginning a new HDCP authentication by
sending AKE_init message we need to first authenticate only the
repeater. Only after repeater authentication failure, it makes sense
to start a new HDCP authentication. Even though it made sense to not
enable HDCP directly from check_link and schedule it for later, repeater
authentication needs to be done immediately.
--v2
-Fix comment grammatical errors [Ankit]
Fixes: 47ef55a8b784 ("drm/i915/hdcp: Don't enable HDCP2.2 directly from check_link")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217083723.2883317-1-suraj.kandpal@intel.com
(cherry picked from commit 605a33e765890e4f1345315afc25268d4ae0fb7c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Only look up the VBIOS mode during atomic_check if the display mode
changes. For page flips, the previous settings still apply. Avoids the
runtime overhead of looking up the VBIOS mode on each page flip.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-17-tzimmermann@suse.de
|
|
The type struct ast_vbios_mode_info used to store information about
the color format and display mode. It has outlived its purpose. Inline
its fields into struct ast_crtc_state and replace all instances.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-16-tzimmermann@suse.de
|
|
Replace the large switch statement with a look-up table when selecting
the mode index. Makes the code easier to read. The table is sorted by
resolutions; if run-time overhead from traversal becomes significant,
binary search would be a possible optimization.
The mode index requires a refresh-rate index to be added or subtracted,
which still requires a minimal switch. In the original code, some of
the indices did not contain this computation. Those cases would have been
equivalent to adding 0, so they are now all subsumed in the switch's
default branch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
v3:
- explain the semantics of the new switch statement (Jocelyn)
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-15-tzimmermann@suse.de
|
|
ASTDP requires a mode index, depending on the resolution. Move the
look-up code from ast_dp_set_mode() into a separate helper. Inline
the rest of the function into its only caller. Rename the variable
names and register constants to match the programming manual.
As before, the mode-index lookup still happens during the update's
atomic commit. Right now, there's no way of doing it during the atomic
check. The lookup requires the VBIOS mode, which is not available at
the atomic check's invocation. At least warn now if the mode index
could not be found.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-14-tzimmermann@suse.de
|
|
The helper ast_get_vbios_mode_info() retrieves hardware-specific format
and display-mode information. Inline the function into its only caller.
While at it, also replace a use of struct drm_format_info.cpp with the
correct DRM 4CC codes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-13-tzimmermann@suse.de
|
|
Test DRM display modes against the list of modes supported by the
VBIOS. The helper will respect the supported-modes flags in struct
ast_device. Hence only DRM display modes supported by the VBIOS
will be reported; without the current duplication of this information.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-12-tzimmermann@suse.de
|
|
Mode lines are independent from hardware Gen or TX chip, so hide all
VBIOS mode tables in ast_vbios.c.
Move the look-up code for VBIOS modes from ast_vbios_get_mode_info()
to ast_vbios_find_mode(). The new look-up function respects the
supported-mode flags in struct ast_device. For example, if a device
does not have struct ast_device.support_fullhd set, the helper does
not return a valid mode for 1920x1080. Taking the supported-mode flags
into account allows for making the VBIOS tables the single reference
for validating and setting display modes against hardware capabilities.
v2:
- replace mode switch with look-up table (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-11-tzimmermann@suse.de
|
|
VBIOS mode tables are terminated by an entry with a refresh rate of
0xff. The code is hard to read and fragile to use. Therefore create
an empty entry with AST_VBIOS_MODE_INVALID to terminate each mode list.
Stop at the invalid entry when searching for modes in the tables.
Instead of testing for refresh == 0xff, test with a helper function if
the mode's size and refresh have meaningful values.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-10-tzimmermann@suse.de
|
|
The ast driver looks up supplied display modes from an internal list of
display modes supported by the VBIOS.
Do not use the crtc_-prefixed display values from struct drm_display_mode
for looking up the VBIOS mode. The fields contain raw values that the
driver programs to hardware. They are affected by display settings like
double-scan or interlace.
Instead use the regular vdisplay and hdisplay fields for lookup. As the
programmed values can now differ from the values used for lookup, set
struct drm_display_mode.crtc_vdisplay and .crtc_hdisplay from the VBIOS
mode.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-9-tzimmermann@suse.de
|
|
The ast driver matches DRM display modes against an internal list of
modes supported by the VBIOS. Matching H/V sync flags between modes is
preferred, but optional. If sync flags are not matching, the driver
would program the VBIOS settings to hardware and let the display handle
the difference.
DRM modes are generated from attached displays or standard mode lines.
Therefore differences to the VBIOS modes are not just cosmetical, but
signal possible incompatibility with the display hardware.
Hence make matching H/V sync flags mandatory. If the VBIOS does not
support a certain mode, we should report it as unsupported. Note that
the VBIOS mode tables all appear to refer to standard modes.
(If sync flags really make no difference to the VBIOS, the ast driver
shouldn't match them in the first place.)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-8-tzimmermann@suse.de
|
|
Detect support for 1920x1200 (WUXGA) in ast_detect_widescreen(). The
flag is cleared by default. The test logic has been taken from existing
code in ast_crtc_helper_mode_valid(). The code in that function is being
replaced by the new flag.
v2:
- move shared detection code into helper (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-7-tzimmermann@suse.de
|
|
Detect support for 1920x1080 (FullHD) in ast_detect_widescreen(). The
flag is cleared by default. The test logic has been taken from existing
code in ast_crtc_helper_mode_valid(). The code in that function is being
replaced by the new flag.
For Gen3, a new branch duplicates the Gen2 logic and adds a test for
AST2200. Gen2 adds a test for AST2100.
v2:
- use fullhd flag for setting max width/height
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-6-tzimmermann@suse.de
|
|
Testing for support of widescreen modes mixes up various hardware
Gens. First branch by hardware Gen, then do specific tests for each
Gen. By default, widesscreen support is disabled.
Later patches will add more specific tests for each Gen.
v2:
- move shared detection code into helper (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-5-tzimmermann@suse.de
|
|
The flag support_wide_screen in struct ast_device selects devices that
support resolutions of at least 1680x1050 (WSXGA+). Name it accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-4-tzimmermann@suse.de
|
|
Rename variables and register constants to align with the programming
manual. Add new constants where necessary.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-3-tzimmermann@suse.de
|
|
The resolution 1152x864 has a ratio of 4:3 and is already handled
as such. Remove it from the list of widescreen resolutions.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-2-tzimmermann@suse.de
|
|
Pull drm fixes from Dave Airlie:
"This is only AMD fixes:
amdgpu:
- GC 12 fix
- Aldebaran fix
- DCN 3.5 fix
- Freesync fix
amdkfd:
- Per queue reset fix
- MES fix"
* tag 'drm-next-2025-02-01' of https://gitlab.freedesktop.org/drm/kernel:
drm/amd/display: restore invalid MSA timing check for freesync
drm/amdkfd: only flush the validate MES contex
drm/amd/display: Correct register address in dcn35
drm/amd/pm: Mark MM activity as unsupported
drm/amd/amdgpu: change the config of cgcg on gfx12
drm/amdkfd: Block per-queue reset when halt_if_hws_hang=1
|
|
Currently, intel_dp_dsc_max_src_input_bpc can return 0 for platforms not
supporting DSC, which could theoretically cause issues in clamp()
due to a low limit being greater than the high limit.
Instead, return the minimum bpc supported by the source to prevent
such issues.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYtNfM399_=_ff81zeRJv=0+z7oFJfPGmJgTp6yrJmU+1w@mail.gmail.com/
Fixes: 160672b86b0d ("drm/i915/dp: Use clamp for pipe_bpp limits with DSC")
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131041342.3086716-1-ankit.k.nautiyal@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If the hotplug detect of a display is low for longer than one second
(configurable through drm_dp_cec_unregister_delay), then the CEC adapter
is unregistered since we assume the display was disconnected. If the
HPD went low for less than one second, then we check if the properties
of the CEC adapter have changed, since that indicates that we actually
switch to new hardware and we have to unregister the old CEC device and
register a new one.
Unfortunately, the test for changed properties was written poorly, and
after a new CEC capability was added to the CEC core code the test always
returned true (i.e. the properties had changed).
As a result the CEC device was unregistered and re-registered for every
HPD toggle. If the CEC remote controller integration was also enabled
(CONFIG_MEDIA_CEC_RC was set), then the corresponding input device was
also unregistered and re-registered. As a result the input device in
/sys would keep incrementing its number, e.g.:
/sys/devices/pci0000:00/0000:00:08.1/0000:e7:00.0/rc/rc0/input20
Since short HPD toggles are common, the number could over time get into
the thousands.
While not a serious issue (i.e. nothing crashes), it is not intended
to work that way.
This patch changes the test so that it only checks for the single CEC
capability that can actually change, and it ignores any other
capabilities, so this is now safe as well if new caps are added in
the future.
With the changed test the bit under #ifndef CONFIG_MEDIA_CEC_RC can be
dropped as well, so that's a nice cleanup.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reported-by: Farblos <farblos@vodafonemail.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 2c6d1fffa1d9 ("drm: add support for DisplayPort CEC-Tunneling-over-AUX")
Tested-by: Farblos <farblos@vodafonemail.de>
Link: https://patchwork.freedesktop.org/patch/msgid/361bb03d-1691-4e23-84da-0861ead5dbdc@xs4all.nl
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Follow the probe flow in case of VF and do not enter survivability mode
in case of pcode init failure.
Fixes: 5e940312a2ac ("drm/xe: Add functions and sysfs for boot survivability")
Suggested-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131080527.2256475-1-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Now that interrupts are disabled for xe_display_init_noaccel,
both xe_display_init_noirq and xe_display_init_noaccel run in the same
context.
This means that we can get rid of the 3 different init calls. Without
interrupts, nothing is touching display up to this point.
Unify those 3 early display calls into a single xe_display_init_early(),
this makes the init sequence cleaner, and display less tangled during
init.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250121142850.4960-3-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
As stated in previous commit, we have to move interrupt handling
until after xe_display_init_noaccel, as using memirqs would require
an allocation.
A full solution will of course require memirq allocation to be moved,
but the first part only focuses on the required changes to display.
Reviewed-by: Ilia Levi <ilia.levi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250121142850.4960-2-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
We're changing the driver to have no interrupts during early init for
Xe, so we poll the PIPE_FRMSTMSMP counter instead.
Interrupts cannot be enabled during FB readout because memirq's requires
an allocation. This would overwrite the FB we want to read out.
While it might be possible to also run do the same in i915 and run
it without interrupts, the platforms i915 supports had a less clear
distinction between display and graphics. For this reason I choose
only to touch Xe for now.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250121142850.4960-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
Improve code clarity by using existing min_array() and max_array()
helpers to find the lowest and highest values in an array.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/62a104535c01c667a99ec209c3218a13355568cf.1738161945.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
mst_stream_find_vcpi_slots_for_bpp() has become a thin wrapper that
merely juggles parameters around. Remove it.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/abdd205087dc2ab0bdae09d7374d5f262f605aba.1738161945.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Move mst_state->pbn_div calculation to intel_dp_mtp_tu_compute_config()
to allow further refactoring.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0cc1b507601c9964ebae7d50b1f90b1ce00acb11.1738161945.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Semantically mst_stream_find_vcpi_slots_for_bpp() does not seem like the
place to make decisions about lane_count and port_clock. Move them to
the callers, and remove the limits parameter that becomes unused.
This leads to slight duplication, but a) this makes further refactoring
easier, and b) also the SST code sets link parameters in different
places for uncompressed and compressed paths.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/101ce3fc6afff55d966336f3ab72090317750f82.1738161945.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Pointers first, bpp params in min, max, step. This is slightly more
natural to follow.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ea9669edc5973cdbca92aeb4e168850015e9d1bb.1738161945.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The limits get passed around, but are only modified in a few
places. Constify the pointers elsewhere so it's easier to follow where
they can be modified.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6ab2f68eef7849aca18e82ad788e44e9f82b576e.1738161945.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Backmerge drm-next to get the common APIs and refactors as well as
getting the display changes from i915 in xe so the probe order can be
improved.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Add missing runtime registers for graphics versions of 3000 or higher.
This is required for Xe3 where additionally we have
MIRROR_L3BANK_ENABLE register.
Signed-off-by: Jakub Kolakowski <jakub1.kolakowski@intel.com>
Suggested-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Adam Miszczak <adam.miszczak@linux.intel.com>
Cc: Jakub Kolakowski <jakub1.kolakowski@intel.com>
Cc: Lukasz Laguna <lukasz.laguna@intel.com>
Cc: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piorkowski <piotr.piorkowski@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Tested-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250128110300.2840596-2-jakub1.kolakowski@intel.com
|
|
The Makefile for xe asks us to keep the lists of object files sorted:
# Please keep these build lists sorted!
Reshuffle the lists into the correct sort order. That was done by
filtering each unsorted list through 'LC_ALL=C sort'.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115140812.20799-1-gustavo.sousa@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
GuC firmware counts received VF configuration KLVs and may start
validation of the complete VF config even if some resources where
unprovisioned in the meantime, leading to unexpected errors like:
$ echo 1 | sudo tee /sys/kernel/debug/dri/0000:00:02.0/gt0/vf1/contexts_quota
$ echo 0 | sudo tee /sys/kernel/debug/dri/0000:00:02.0/gt0/vf1/contexts_quota
$ echo 1 | sudo tee /sys/kernel/debug/dri/0000:00:02.0/gt0/vf1/doorbells_quota
$ echo 0 | sudo tee /sys/kernel/debug/dri/0000:00:02.0/gt0/vf1/doorbells_quota
$ echo 1 | sudo tee /sys/kernel/debug/dri/0000:00:02.0/gt0/vf1/ggtt_quota
tee: '/sys/kernel/debug/dri/0000:00:02.0/gt0/vf1/ggtt_quota': Input/output error
To mitigate this problem trigger explicit VF config reset after
unprovisioning any of the critical resources (GGTT, context or
doorbell IDs) that GuC is monitoring.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129195947.764-3-michal.wajdeczko@intel.com
|
|
It turned out that GuC validates VF configuration immediately
after receiving "some" set of configuration KLVs and complains
if one of the critical, from GuC understanding, resource is left
unprovisioned, even if PF should be still allowed to make late VF
config adjustments, since VF was not yet started.
This issue was discovered after we decided to asynchronously
re-send configuration KLVs after GT reset/resume, as then fair
VF auto-provisioning could already allocate some of the resources,
which was a prerequiste for sending those config KLVs:
# fair GGTT provisioning
[] xe 0000:00:02.0: [drm] GT0: PF: pushed VF1 config with 2 KLVs:
[] xe 0000:00:02.0: [drm] GT0: { key 0x0001 : 64b value 0x176a000 } # ggtt_start
[] xe 0000:00:02.0: [drm] GT0: { key 0x0002 : 64b value 0xfd696000 } # ggtt_size
[] xe 0000:00:02.0: [drm] GT0: PF: VF1 provisioned with 4251541504 (3.96 GiB) GGTT
# re-provisioning worker
[] xe 0000:00:02.0: [drm] *ERROR* GT0: H2G request 0x5503 failed: error 0x60 hint 0x0
[] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF1 14 config KLVs (-EIO)
[] xe 0000:00:02.0: [drm] GT0: { key 0x0001 : 64b value 0x176a000 } # ggtt_start
[] xe 0000:00:02.0: [drm] GT0: { key 0x0002 : 64b value 0xfd696000 } # ggtt_size
[] xe 0000:00:02.0: [drm] GT0: { key 0x8a0b : 32b value 0 } # begin_ctx_id
[] xe 0000:00:02.0: [drm] GT0: { key 0x0004 : 32b value 0 } # num_contexts
[] xe 0000:00:02.0: [drm] GT0: { key 0x8a0a : 32b value 0 } # begin_db_id
[] xe 0000:00:02.0: [drm] GT0: { key 0x0006 : 32b value 0 } # num_doorbells
[] xe 0000:00:02.0: [drm] GT0: { key 0x8a01 : 32b value 0 } # exec_quantum
[] xe 0000:00:02.0: [drm] GT0: { key 0x8a02 : 32b value 0 } # preempt_timeout
[] xe 0000:00:02.0: [drm] GT0: { key 0x8a03 : 32b value 0 } # cat_error_count
[] xe 0000:00:02.0: [drm] GT0: { key 0x8a04 : 32b value 0 } # engine_reset_count
[] xe 0000:00:02.0: [drm] GT0: { key 0x8a05 : 32b value 0 } # page_fault_count
[] xe 0000:00:02.0: [drm] GT0: { key 0x8a06 : 32b value 0 } # guc_time_us
[] xe 0000:00:02.0: [drm] GT0: { key 0x8a07 : 32b value 0 } # irq_time_us
[] xe 0000:00:02.0: [drm] GT0: { key 0x8a08 : 32b value 0 } # doorbell_time_us
[] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF1 configuration (-EIO)
To avoid such errors stop sending BEGIN_CONTEXT/DOORBELL_ID KLVs
if no GuC context/doorbell IDs were provisioned to VF.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4176
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129195947.764-2-michal.wajdeczko@intel.com
|
|
as_sdp param changes from vrr to cmrr should happen to fastset.
Changing as_sdp params should not trigger any modeset.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250130051609.1796524-7-mitulkumar.ajitkumar.golani@intel.com
|
|
Adaptive sync sdp param computation, we can configure during
full modeset as well when sink is having vrr support, where
it doesn't need dependency on vrr.enable status and can also
match vrr enable/disable fastset requirement.
--v2:
- Separate the change from as_sdp.vtotal. [Ankit]
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250130051609.1796524-6-mitulkumar.ajitkumar.golani@intel.com
|
|
Compute as_sdp.vtotal based on minimum vtotal calculated
during vrr computation.
--v2:
- make a separate patch and update to vmin only [Ankit].
--v3:
- Update vtotal to vmin for cmrr case as well [Ankit].
--v4:
- update vtotal with wrapper function of vmin [Ville]
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250130051609.1796524-5-mitulkumar.ajitkumar.golani@intel.com
|
|
Currently we support Adaptive sync operation mode with dynamic frame
rate, but instead the operation mode with fixed rate is set.
This was initially set correctly in the earlier version of changes but
later got changed, while defining a macro for the same.
Fixes: a5bd5991cb8a ("drm/i915/display: Compute AS SDP parameters")
Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250130051609.1796524-4-mitulkumar.ajitkumar.golani@intel.com
|
