| Age | Commit message (Collapse) | Author |
|---|
|
The commit 325ba852d148 ("drm/i2c: move TDA998x driver under
drivers/gpu/drm/bridge") deleted the drivers/gpu/drm/i2c/ subdir, but
didn't update upper level Makefile. Drop corresponding line to fix build
issues.
Fixes: 325ba852d148 ("drm/i2c: move TDA998x driver under drivers/gpu/drm/bridge")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/dri-devel/20250213113841.7645b74c@canb.auug.org.au
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213-fix-tda-v1-1-d3d34b2dc907@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
It malicious user provides a small pptable through sysfs and then
a bigger pptable, it may cause buffer overflow attack in function
smu_sys_set_pp_table().
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
It is possible for some waves in a workgroup to finish their save
sequence before the group leader has had time to capture the workgroup
barrier state. When this happens, having those waves exit do impact the
barrier state. As a consequence, the state captured by the group leader
is invalid, and is eventually incorrectly restored.
This patch proposes to have all waves in a workgroup wait for each other
at the end of their save sequence (just before calling s_endpgm_saved).
Signed-off-by: Lancelot SIX <lancelot.six@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
|
|
In function psp_init_cap_microcode(), it should bail out when failed to
load firmware, otherwise it may cause invalid memory access.
Fixes: 07dbfc6b102e ("drm/amd: Use `amdgpu_ucode_*` helpers for PSP")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The destructor of a gtt bo is declared as
void amdgpu_amdkfd_free_gtt_mem(struct amdgpu_device *adev, void **mem_obj);
Which takes void** as the second parameter.
GCC allows passing void* to the function because void* can be implicitly
casted to any other types, so it can pass compiling.
However, passing this void* parameter into the function's
execution process(which expects void** and dereferencing void**)
will result in errors.
Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Fixes: fb91065851cd ("drm/amdkfd: Refactor queue wptr_bo GART mapping")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Bump the driver version for RV/PCO compute stability fix
so mesa can use this check to enable compute queues on
RV/PCO.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
|
|
When mesa started using compute queues more often
we started seeing additional hangs with compute queues.
Disabling gfxoff seems to mitigate that. Manually
control gfxoff and gfx pg with command submissions to avoid
any issues related to gfxoff. KFD already does the same
thing for these chips.
v2: limit to compute
v3: limit to APUs
v4: limit to Raven/PCO
v5: only update the compute ring_funcs
v6: Disable GFX PG
v7: adjust order
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Suggested-by: Błażej Szczygieł <mumei6102@gmail.com>
Suggested-by: Sergey Kovalenko <seryoga.engineering@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3861
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-January/119116.html
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
|
|
UVD and VCN were split into separate dpm helpers in commit
ff69bba05f08 ("drm/amd/pm: add inst to dpm_set_powergating_by_smu")
as such, there is no need to include UVD in the is_vcn variable since
UVD and VCN are handled by separate dpm helpers now. Fix the check.
Fixes: ff69bba05f08 ("drm/amd/pm: add inst to dpm_set_powergating_by_smu")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3959
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-February/119827.html
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Boyuan Zhang <boyuan.zhang@amd.com>
|
|
TDA998x is the HDMI bridge driver, incorporating drm_connector and
optional drm_encoder (created via the component bind API by the TICLDC
and HDLCD drivers). Thus it should be residing together with the other
DRM bridge drivers under drivers/gpu/drm/bridge/.
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113-drm-move-tda998x-v3-3-214e0682a5e4@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Move the driver for NXP TDA9950 / CEC part of TDA998x together to
drivers/media/i2c, close to other CEC drivers. Specify 'default
DRM_I2C_NXP_TDA998X' in order to simplify migration from old config
files as the Kconfig name has been changed to follow media/cec style.
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113-drm-move-tda998x-v3-2-214e0682a5e4@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
After the commit 0fb2970b4b6b ("drm/armada: remove non-component
support") there are no remaining users of the struct
tda998x_encoder_params. Drop the header and corresponding API from the
TDA998x driver.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113-drm-move-tda998x-v3-1-214e0682a5e4@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Continuing the alignment with i915 runtime pm sequence. Add
this missing call.
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131115014.29625-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Decode the DSB error interrupts into human readable
form for easier debugging.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207223159.14132-9-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
Since we don't do mailbox updates the push send bit
should alwyas clear by the time the delay vblank fires
and the flip completes. Check for that to make sure we
haven't screwed up the sequencing/vblank evasion/etc.
On the DSB path we should be able to guarantee this
since we don't have to deal with any scheduler latencies
and whatnot. I suppose unexpected DMA/memory latencies
might be the only thing that might trip us up here.
For the MMIO path we do always have a non-zero chance
that vblank evasion fails (since we can't really guarantee
anything about the scheduling behaviour). That could trip
up this check, but that seems fine since we already print
errors for other types of vblank evasion failures.
Should the CPU vblank evasion actually fail, then the push
send bit can still be set when the next commit happens. But
both the DSB and MMIO paths should handle that situation
gracefully.
v2: Only check once instead of polling for two scanlines
since we should now be guaranteed to be past the
delayed vblank.
Also check in the MMIO path for good measure
v3: Skip the push send check when VRR is disabled.
With joiner the secondary pipe's DSBs doen't have access
to the transcoder registers, and so doing this check
there triggers a reponse timeout error on the DSB. VRR
is not currently allowed when using joiner, so this will
prevent the bogus register access.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210160711.24010-1-ville.syrjala@linux.intel.com
|
|
Currently we trigger the push send first, then follow it with
a "wait for safe window". That approach no longer works on
PTL+ because triggering the push send immediately ends the safe
window. On prior hardware the safe window extended past the
push being sent (presumably all the way to the pipe's delayed
vblank).
In order to deal with the new hardware behaviour we must reverse
the order of these two operations: first wait for safe window,
then trigger the push.
The only slight danger with this approach is that if we mess up
the vblank evasion around the vmax decision boundary the push
might get postponed until after the next frame's vactive. But
assuming we don't mess up the vblank evasion this approach is
completely safe.
As a slight bonus we can perform the push after we've done the
LUT writes as well, meaning we no longer have to worry about
extending the vblank delay to provide enough time for LUT
programming. Instead we will now depend on the vblank evasion
at vmax decision boundary to guarantee this.
However vblank delay (or framestart delay) is still the only
way to provide extra time for the LUT programming in the
non-VRR use cases. Let's assume we don't need anything extra
for now, but eventually we should come up with some proper
estimates on how long the LUT programming can take and
configure the vblank delay accordingly for the non-VRR use
cases.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207223159.14132-7-ville.syrjala@linux.intel.com
|
|
Add a function for emitting a DSB poll instruction. We'll allow
the caller to specify the poll parameters.
v2: s/wait/wait_us/ (Ankit)
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207223159.14132-6-ville.syrjala@linux.intel.com
|
|
Skip all the commit completion interrupt stuff on the
chained DSB when we don't take the full DSB path (ie. when
the plane/pipe programming is done via MMIO). The commit
completion will be done via the CPU side vblank interrupt.
Currently this is just a redundant interrupt, so not a big
deal. But in the future we'll be moving the TRANS_PUSH write
into the chained DSB as well, and that we definitely don't
want to do when it's also being done by the CPU from
intel_pipe_update_end().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207223159.14132-5-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
When we send a push during vblank the TRANS_PUSH write happens
at some point during a scanline, and the hardware picks it up
on the next scanline. Thus there is up to one extra scanline
of delay between the TRANS_PUSH write and the delayed vblank
triggering. Account for that during intel_dsb_wait_vblank_delay()
so that we are guaranteed to be past the delayed vblank before
we trigger the completion interrupt for the commit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207223159.14132-4-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
We don't really want legacy cursor updates to trigger
VRR pushes because these can happen willy nilly and we
generally want more precise control over the pushes.
The fastpath in intel_legacy_cursor_update() doesn't
send pushes, but if we punt to the full commit path
(with the flip completion short circuited) we are currently
sending pushes. Skip those as well so that they don't
interfere with the push handling from normal commits.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207223159.14132-3-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
The "wait usec" DSB command doesn't quite seem to able to
guarantee that it always waits at least the specified
amount of usecs. Some of that could be just because it
supposedly just does some kind of dumb timestamp comparison
internally. But I also see cases where two hardware timestamps
sampled on each side of the "wait usec" command come out one
less than expected. So it looks like we always need at least a
+1 to guarantee that we never wait less than specified. Always
apply that adjustment in dsb_wait_usec().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207223159.14132-2-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
|
|
Change the visionox-r66451 panel to use multi style functions for
improved error handling. Additionally, always drop LPM flag after
sending init sequence.
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210092342.287324-1-tejasvipin76@gmail.com
|
|
The top of stolen memory is WOPCM, which shouldn't be accessed. Remove
this portion from the stolen memory region for discrete platforms.
This was already done for integrated, but was missing for discrete
platforms.
This also moves get_wopcm_size() so detect_bar2_dgfx() and
detect_bar2_integrated can use the same function.
v2: Improve commit message and suitable stable version tag(Lucas)
Fixes: d8b52a02cb40 ("drm/xe: Implement stolen memory.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210143654.2076747-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit 2c7f45cc7e197a792ce5c693e56ea48f60b312da)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Since the initial commit 57692c94dcbe ("drm/v3d: Introduce a new DRM driver
for Broadcom V3D V3.x+") the struct v3d_dev reserved a pointer for
an optional V3D clock. But there wasn't any code, which fetched it.
So add the missing clock handling before accessing any V3D registers.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250201125046.33030-1-wahrenst@gmx.net
|
|
drm_sched_init() has a great many parameters and upcoming new
functionality for the scheduler might add even more. Generally, the
great number of parameters reduces readability and has already caused
one missnaming, addressed in:
commit 6f1cacf4eba7 ("drm/nouveau: Improve variable name in
nouveau_sched_init()").
Introduce a new struct for the scheduler init parameters and port all
users.
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Matthew Brost <matthew.brost@intel.com> # for Xe
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> # for Panfrost and Panthor
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com> # for Etnaviv
Reviewed-by: Frank Binns <frank.binns@imgtec.com> # for Imagination
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> # for Sched
Reviewed-by: Maíra Canal <mcanal@igalia.com> # for v3d
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> # for amdxdna
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211111422.21235-2-phasta@kernel.org
|
|
With the PCH checks based on PCH types instead of IDs, the i915->pch_id
member has become unused. Remove it.
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fac1c59800128e8f398e83d718a3a5dc235d0526.1738923308.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Only the PCH identification code needs the PCH device IDs, as all the
PCH checks are now based on PCH type. Hide the PCH device IDs inside
intel_pch.c. Remove the unused INTEL_PCH_ID() macro while at it.
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d1ceb9fc461cf21e1b885a55293f593eba1458ea.1738923308.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add PCH type PCH_LPT_LP and rename PCH_LPT to PCH_LPT_H for
consistency. Keep the existing HAS_PCH_LPT*() macros, but express them
in terms of the PCH types instead of looking at the device IDs
directly. This makes the PCH checks independent of the PCH device IDs.
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/777b63f50b10fba1d768af25870e81b33267bdc8.1738923308.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Replace all other left over drm_i915_private with intel_display
in dpll_mgr.c.
--v2
-Don't use inline to_intel_display() [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-9-suraj.kandpal@intel.com
|
|
Use intel_display as an argument for intel_shared_dpll_init() and
replace drm_i915_private in function wherever possible.
While at it prefer using display->platform.xx over IS_PLATFORM.
Initialize dpio_phy and dpio_channel since with IS_GEMINILAKE()
and IS_BROXTON() compiler knows it will return false for xe but
since display->platform.xx is a runtime check which means the
compiler sees a potential path where uninitialized variables
could be accessed and raises a warning.
--v2
-Amend commit message to explain why some variables were
initialized [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-8-suraj.kandpal@intel.com
|
|
Use intel_display instead of drm_i915_private for update_refclk hook.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-7-suraj.kandpal@intel.com
|
|
Use intel_display instead of drm_i915_private to assert pll enabled
and disabled and the corresponding changes needed to make that happen.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-6-suraj.kandpal@intel.com
|
|
We use intel_display for function hooks of shared_dpll_mgr and
any function that gets called when we use for_each_shared_dpll.
This also contains some opportunistic display->platform.xx changes
all to reductate the use of drm_i915_private.
--v2
-rebase
--v3
-Don't use inline to_i915 [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-5-suraj.kandpal@intel.com
|
|
Let's use intel_display for dpll dump and compare hw state. This also
helps elimanate drm_i915_private dependency from i915_shared_dplls_info
in intel_display_debugfs.c
--v2
-Fix commit message [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-4-suraj.kandpal@intel.com
|
|
Change the argument of for_each_shared_dpll to take intel_display which
helps move as an ongoing effort to get rid off the dependency on
drm_i915_private. Some opportunistic changes in intel_pch_refclk done
too.
--v2
-Prefer using &i915->display [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-3-suraj.kandpal@intel.com
|
|
Use struct intel_display wherever possible in intel_display_debug_fs.c
to reduce the use of drm_i915_private.
While at it do the opportunistic display->platform.xx replacement.
--v2
-Rebase
--v3
-Don't use inline to_intel_display [Jani]
-Don't use display debug fs as subject prefix [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-2-suraj.kandpal@intel.com
|
|
Ensure drm headers build, are self-contained, have header guards, and
have no kernel-doc warnings, when CONFIG_DRM_HEADER_TEST=y.
The mechanism follows similar patters used in i915, xe, and usr/include.
To cover include/drm, we need to recurse there using the top level
Kbuild and the new include/Kbuild files.
v4: check for CONFIG_WERROR in addition to CONFIG_DRM_WERROR
v3: adapt to upstream build changes
v2: make DRM_HEADER_TEST depend on DRM
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/d8ad1c6d707f38a55987f616cb9650aef30b84e1.1737556766.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
platform_get_resource_byname() and devm_ioremap_resource() can be
replaced by devm_platform_ioremap_resource_byname(), which can
simplify the code logic a bit, No functional change here.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828084929.2527228-1-ruanjinjie@huawei.com
|
|
Convert most mutex_(un)lock calls to use (scoped_)guard instead. This
generally reduces line count and prevents bugs like forgetting to unlock
the mutex. I've left traditional calls in a few places where scoped
helpers would be more verbose. This mostly happens where
debugfs_file_put needs to be called regardless. I looked into defining a
CLASS for debugfs_file, but it seems like more effort than it's worth
since debugfs_file_get can fail.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207162528.1651426-3-sean.anderson@linux.dev
|
|
Instead of attempting the same mutex twice, lock and unlock it.
This bug has been detected by the Clang thread-safety analyzer.
Cc: Sean Anderson <sean.anderson@linux.dev>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes: 28edaacb821c ("drm: zynqmp_dp: Add debugfs interface for compliance testing")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207162528.1651426-2-sean.anderson@linux.dev
|
|
Currently xe_guc_log_print_dmesg() is unused, as it's expected
developers to add those calls when needed. However it makes it hard to
guarantee it's working as nothing is testing it. Add a node in debugfs
so it can be tested. This is purely for testing purposes since with the
device probed and working, the guc log can be obtained by the regular
debugfs file.
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131171716.3998432-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Explicitly using NULL is the correct approach.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502050322.VUBMyUHc-lkp@intel.com/
Fixes: dcdd6b84d9ac ("drm/xe/pxp: Allocate PXP execution resources")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204200144.1445800-1-daniele.ceraolospurio@intel.com
|
|
The Lenovo Thinkpad T14s Gen6 Snapdragon is currently sold with three
different panel versions: OLED, Low Power IPS or IPS with Touchscreen.
My Low Power IPS version had this panel and the kernel complained
about not knowing any details. I don't have any panel documentation,
but as far as I can see the same timings for the already supported
CSO panel also work for this one.
The raw EDID is:
00 ff ff ff ff ff ff 00 0e 6f 13 14 00 00 00 00
00 1e 01 04 a5 1e 13 78 03 82 53 a4 55 4d 9b 24
0d 51 55 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 35 3c 80 a0 70 b0 23 40 30 20
36 00 2e bd 10 00 00 18 00 00 00 fd 00 30 3c 4a
4a 0f 01 0a 20 20 20 20 20 20 00 00 00 fe 00 43
53 4f 54 20 54 33 0a 20 20 20 20 20 00 00 00 fe
00 4d 4e 45 30 30 37 4a 41 31 2d 32 0a 20 00 8b
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211014314.94429-1-sre@ring0.de
|
|
Convert the remaining intel_display_power.h interfaces to
take struct intel_display instead of struct drm_i915_private.
intel_display_power.c still has some internal uses due to
i915->runtime_pm.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211000135.6096-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Looks like I missed one of myriad CONFIG_DRM_I915_DEBUG_RUNTIME_PM=n
special cases when converting the intel_display_power_{get,put}()
code to use struct intel_display. Only noticed after the fact
when building a EXPERT=n kernel :/
Fixes: 5dcfda5cfa42 ("drm/i915: Convert intel_display_power_{get,put}*() to intel_display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211000135.6096-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
devm_kasprintf() calls can return null pointers on failure.
But some return values were not checked in zynqmp_audio_init().
Add NULL check in zynqmp_audio_init(), avoid referencing null
pointers in the subsequent code.
Fixes: 3ec5c1579305 ("drm: xlnx: zynqmp_dpsub: Add DP audio support")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211102049.6468-1-hanchunchao@inspur.com
|
|
Fix "mapping sg segment longer than device claims to support" warning by
setting the max segment size.
Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Tested-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115-xilinx-formats-v2-10-160327ca652a@ideasonboard.com
|
|
- Added the new device ID
- Added new pll algorithm
Signed-off-by: Gwenael Georgeault <ggeorgea@matrox.com>
Co-authored-by: Mamadou Insa Diop <mdiop@matrox.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/alpine.LFD.2.00.2502071401180.14188@pluton.matrox.com
|
|
The top of stolen memory is WOPCM, which shouldn't be accessed. Remove
this portion from the stolen memory region for discrete platforms.
This was already done for integrated, but was missing for discrete
platforms.
This also moves get_wopcm_size() so detect_bar2_dgfx() and
detect_bar2_integrated can use the same function.
v2: Improve commit message and suitable stable version tag(Lucas)
Fixes: d8b52a02cb40 ("drm/xe: Implement stolen memory.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210143654.2076747-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
|
|
Validate each display mode against the astdp transmitter chips. Filters
out modes that the chip does not support.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204133209.403327-5-tzimmermann@suse.de
|
|
Look up the mode index for the astdp transmitter ship in the encoder's
atomic check and report an error if the display mode is not supported.
The lookup uses the DRM display mode instead of the driver's internal
VBIOS mode. Both are equivalent. The modesetting code later reads
the calculated index from the connector state to avoid recalculating it.
v2:
- fix typo in commit message (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204133209.403327-4-tzimmermann@suse.de
|
