| Age | Commit message (Collapse) | Author |
|
Critical Temperature needs to be reported in
millidegree Celsius.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
rlc firmware does required setting, driver need not do it.
Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a function to wait till bootloader has reached steady state.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Tested-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[What]
Current SRIOV still using adev->clock.default_XX which gets from
atomfirmware. But these fields are abandoned in atomfirmware long ago.
Which may cause function to return a 0 value.
[How]
We don't need to check whether SR-IOV. For SR-IOV one-vf-mode,
pm is enabled and VF is able to read dpm clock
from pmfw, so we can use dpm clock interface directly. For
multi-VF mode, VF pm is disabled, so driver can just react as pm
disabled. One-vf-mode is introduced from GFX9 so it shall not have
any backward compatibility issue.
Signed-off-by: Horace Chen <horace.chen@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
BACO dummy mode could be set under reset conditions and that affects
framebuffer access. Check If baco dummy mode is set, unset it if so.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Tested-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
If VBlank_nom is too small, it will cause
VStartUP_Start smaller than VBackPorch + VSync width which is an
invalid case for VStartUP_Start and where to send AS-SDP.
[How]
Setup a minimum value to VBlank_nom
Reviewed-by: Reza Amini <reza.amini@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
vstartup is calculated to be a large number. it works because
it is within vertical blank, but it reduces region of blank that
can be used for power gating.
[how]
Calculation needs to convert micro seconds to number of
vertical lines.
Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Reza Amini <reza.amini@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
This Unit correction exposes a Replay corruption.
[how]
This reverts commit:
commit dbd29029c7b5 ("drm/amd/display: Correct unit conversion for vstartup")
Roll back unit conversion until Replay can fix their corruption.
Fixes: dbd29029c7b5 ("drm/amd/display: Correct unit conversion for vstartup")
Reviewed-by: Reza Amini <reza.amini@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable ras for mp0 v13_0_6 sriov
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
if hmm_range_get_pages returns EBUSY error during
svm_range_validate_and_map, within the context of a page fault
interrupt. This should retry through svm_range_restore_pages
callback. Therefore we treat this as EAGAIN error instead, and defer
it to restore pages fallback.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Powergating is handled in the host driver.
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Samir Dhume <samir.dhume@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add critical temperature message support func for smu v13.0.6
and expose critical temperature as part of hw mon attributes
for GC v9.4.3
v2:
Added comment for pmfw version requirement & move the check
to get_thermal_temperature_range function
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update PMFW interface headers for updated metrics table and
critical temperature message
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Several new fields are exposed in gc_info v2_1
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Mall info v2 is introduced in ip discovery
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
RAS EEPROM device is only supported on dGPU platform for smu v13_0_6.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- There is a DPM issue where if DC is not present,
FCLK will stay at low level.
We need to send a SMU message to configure the DPM
- Reuse smu_v13_0_notify_display_change() for this purpose
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bokun Zhang <bokun.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- Setup replay config on device init.
- Enable replay if feature is enabled (prioritize replay over PSR, since
it can be enabled in more usecases)
- Add debug masks to enable replay on supported ASICs
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 510d242f498a00f4701b77c6f42df880abacb3bd.
The enablement for the new OD mechanism completed. Also, the support for
fan control related OD feature has been added via this new mechanism.
Thus, it is time to bring back the SMU13 OD support.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add SMU13 fan minimum pwm OD setting support.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add SMU13 fan target temperature OD setting support.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add SMU13 fan acoustic target OD setting support.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Align with FW changes.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable Multi Media User Mode Scheduler
(0 = disabled (default), 1 = enabled).
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable UMSCH to support VPE and VCN user queues.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add front door loading support.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
UMSCH FW uses mmhub engine 3 for invalidation.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Submit a fence command through indirect buffer.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Prepare for VPE and VCN queue submission test.
v2: rebase on drm_exec (Alex)
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add VPE into UMSCH hw resourses,
set vmid mask to 0xf00,
set hqd mask to 0xfe,
then UMSCH can schedule VPE queues.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add basic data structure, dummy ring functions
and ip functions for UMSCH.
Implement sw_init(ring_init and init_microcodede) and
hw_init(load_microcode), UMSCH can boot up now.
Implement hw_init(ring_start) and hw_fini(ring_stop),
UMSCH is ready for command submission now.
Implement set_hw_resources and add/remove_queue,
UMSCH is ready for scheduling now.
Aggregated doorbell is used to notify UMSCH FW that
there is unmapped queue with corresponding priority level
(e.g., AGDB[0] for Real time band, etc.) is updating its job.
v2: squash together initial patches to avoid breaking the
build (Alex)
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add api definition for UMSCH 4.0.
v2: adjust coding style.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add firmware header definition for UMSCH.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add RING TYPE definition for Multi Mdeia User Mode Scheduler.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add SMU13 fan acoustic limit OD setting support.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add SMU13 fan temperature/pwm curve OD setting support.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Initialize number of jpeg ring for vcn 4.0.5.
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The offset is just 32bits here so this can potentially overflow if
somebody specifies a large value. Instead reduce the size to calculate
the last possible offset.
The error handling path incorrectly drops the reference to the user
fence BO resulting in potential reference count underflow.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
By placing the sysfs interfaces creation after `.late_int`. Since some
operations performed during `.late_init` may affect how the sysfs
interfaces should be created.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There will be multiple interfaces(sysfs files) exposed with each representing
a single OD functionality. And all those interface will be arranged in a tree
liked hierarchy with the top dir as "gpu_od". Meanwhile all functionalities
for the same component will be arranged under the same directory.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add IP BLOCK TYPE definition for Multimedia User Mode Scheduler
which is a hardware scheduler for VCN and VPE workload.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
split switch statement into two and consolidate the common
code for printing most of the types of clock speeds
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add headers for UMSCH 4.0.
v2: updates (Alex)
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable PG flags for VCN and Jpeg on IP 11_5_0
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable VCN 4.0.5 on gc 11_5_0.
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Added the video capability query support for VCN version 4_0_5
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable CG and PG flags for VCN on IP 11_5_0
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add VCN_4_0_5 firmware support
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add jpeg support for VCN4_0_5
v2 - update license year (Leo Liu)
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add VCN 4.0.5 initialization and decoder/encoder ring functions.
v2 - update license year (Leo Liu)
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|