summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/amdgpu
AgeCommit message (Collapse)Author
2023-11-29drm/amdgpu: Read aquavanjaram PCIE register stateLijo Lazar
Add support to read aqua vanjaram PCIE register state Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: Add reg_state sysfs attributeLijo Lazar
Add reg_state attribute to fetch the register snapshot of different IPs like XGMI, WAFL,PCIE and USR. To get a snapshot for a particular IP 1) Open the sysfs file 2) Seek to the offset as defined in amdgpu_sysfs_reg_offset 3) Read Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: add amdgpu_reg_state.hAlex Deucher
This header defines the reg state structures exposed via sysfs for umr debugging. v2: add content type Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
2023-11-29drm/amdgpu: Update EEPROM I2C address for smu v13_0_0Candice Li
Check smu v13_0_0 SKU type to select EEPROM I2C address. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdkfd: Run restore_workers on freezable WQsFelix Kuehling
Make restore workers freezable so we don't have to explicitly flush them in suspend and GPU reset code paths, and we don't accidentally try to restore BOs while the GPU is suspended. Not having to flush restore_work also helps avoid lock/fence dependencies in the GPU reset case where we're not allowed to wait for fences. A side effect of this is, that we can now have multiple concurrent threads trying to signal the same eviction fence. Rework eviction fence signaling and replacement to account for that. The GPU reset path can no longer rely on restore_process_worker to resume queues because evict/restore workers can run independently of it. Instead call a new restore_process_helper directly. This is an RFC and request for testing. v2: - Reworked eviction fence signaling - Introduced restore_process_helper v3: - Handle unsignaled eviction fences in restore_process_bos Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Tested-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd: Enable PCIe PME from D3Mario Limonciello
When dGPU is put into BOCO it may be in D3cold but still able send PME on display hotplug event. For this to work it must be enabled as wake source from D3. When runpm is enabled use pci_wake_from_d3() to mark wakeup as enabled by default. Cc: stable@vger.kernel.org # 6.1+ Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: Fix cat debugfs amdgpu_regs_didt causes kernel null pointerLu Yao
For 'AMDGPU_FAMILY_SI' family cards, in 'si_common_early_init' func, init 'didt_rreg' and 'didt_wreg' to 'NULL'. But in func 'amdgpu_debugfs_regs_didt_read/write', using 'RREG32_DIDT' 'WREG32_DIDT' lacks of relevant judgment. And other 'amdgpu_ip_block_version' that use these two definitions won't be added for 'AMDGPU_FAMILY_SI'. So, add null pointer judgment before calling. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lu Yao <yaolu@kylinos.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: fix AGP addressing when GART is not at 0Alex Deucher
This worked by luck if the GART aperture ended up at 0. When we ended up moving GART on some chips, the GART aperture ended up offsetting the AGP address since the resource->start is a GART offset, not an MC address. Fix this by moving the AGP address setup into amdgpu_bo_gpu_offset_no_check(). v2: check mem_type before checking agp v3: check if the ttm bo has a ttm_tt allocated yet Fixes: 67318cb84341 ("drm/amdgpu/gmc11: set gart placement GC11") Tested-by: Mario Limonciello <mario.limonciello@amd.com> Reported-by: Jesse Zhang <Jesse.Zhang@amd.com> Reported-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: christian.koenig@amd.com Cc: mario.limonciello@amd.com
2023-11-29drm/amdgpu: Move mca debug mode decision to rasLijo Lazar
Refactor code such that ras block decides the default mca debug mode, and not swsmu block. By default mca debug mode is set to false. v2: squash in uninitialized value fix (Alex) Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: correct the amdgpu runtime dereference usage countPrike Liang
Fix the amdgpu runpm dereference usage count. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: fix memory overflow in the IB testTim Huang
Fix a memory overflow issue in the gfx IB test for some ASICs. At least 20 bytes are needed for the IB test packet. v2: correct code indentation errors. (Christian) Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: add init_registers for nbio v7.11Li Ma
enable init_registers callback func for nbio v7.11. Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: Force order between a read and write to the same addressAlex Sierra
Setting register to force ordering to prevent read/write or write/read hazards for un-cached modes. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: Do not issue gpu reset from nbio v7_9 bif interruptHawking Zhang
In nbio v7_9, host driver should not issu gpu reset Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Stanley Yang <Stanley.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: optimize RLC powerdown notification on VangoghPerry Yuan
The smu needs to get the rlc power down message to sync the rlc state with smu, the rlc state updating message need to be sent at while smu begin suspend sequence , otherwise SMU will crash while RLC state is not notified by driver, and rlc state probally changed after that notification, so it needs to notify rlc state to smu at the end of the suspend sequence in amdgpu_device_suspend() that can make sure the rlc state is correctly set to SMU. [ 101.000590] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000 [ 101.000598] amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff! [ 110.838026] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000 [ 110.838035] amdgpu 0000:03:00.0: amdgpu: Failed to disable smu features. [ 110.838039] amdgpu 0000:03:00.0: amdgpu: Fail to disable dpm features! [ 110.838040] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62 [ 110.884394] PM: suspend of devices aborted after 21213.620 msecs [ 110.884402] PM: start suspend of devices aborted after 21213.882 msecs [ 110.884405] PM: Some devices failed to suspend, or early wake event detected Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: Retire query/reset_ras_err_status from gfx_v9_4_3Hawking Zhang
Not needed anymore. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Stanley Yang <Stanley.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: update xgmi num links info post gc9.4.2Jonathan Kim
GC IP 9.4.2 and up support TA reporting of the number of xGMI links between peers. Tested-by: Vignesh Chander <vignesh.chander@amd.com> Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd: Document device reset methodsAndré Almeida
Document what each amdgpu driver reset method does. Signed-off-by: André Almeida <andrealmeid@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-28Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to get commit 8d6ef26501b9 ("drm/ast: Disconnect BMC if physical connector is connected") into drm-misc-next. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2023-11-24drm/sched: Reverse run-queue priority enumerationLuben Tuikov
Reverse run-queue priority enumeration such that the higest priority is now 0, and for each consecutive integer the prioirty diminishes. Run-queues correspond to priorities. To an external observer a scheduler created with a single run-queue, and another created with DRM_SCHED_PRIORITY_COUNT number of run-queues, should always schedule sched->sched_rq[0] with the same "priority", as that index run-queue exists in both schedulers, i.e. a scheduler with one run-queue or many. This patch makes it so. In other words, the "priority" of sched->sched_rq[n], n >= 0, is the same for any scheduler created with any allowable number of run-queues (priorities), 0 to DRM_SCHED_PRIORITY_COUNT. Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Danilo Krummrich <dakr@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231124052752.6915-6-ltuikov89@gmail.com
2023-11-24drm/sched: Rename priority MIN to LOWLuben Tuikov
Rename DRM_SCHED_PRIORITY_MIN to DRM_SCHED_PRIORITY_LOW. This mirrors DRM_SCHED_PRIORITY_HIGH, for a list of DRM scheduler priorities in ascending order, DRM_SCHED_PRIORITY_LOW, DRM_SCHED_PRIORITY_NORMAL, DRM_SCHED_PRIORITY_HIGH, DRM_SCHED_PRIORITY_KERNEL. Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Danilo Krummrich <dakr@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Luben Tuikov <ltuikov89@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231124052752.6915-5-ltuikov89@gmail.com
2023-11-20Merge tag 'drm-misc-next-2023-11-17' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 6.8: UAPI Changes: - drm: Introduce CLOSE_FB ioctl - drm/dp-mst: Documentation for the PATH property - fdinfo: Do not align to a MB if the size is larger than 1MiB - virtio-gpu: add explicit virtgpu context debug name Cross-subsystem Changes: - dma-buf: Add dma_fence_timestamp helper Core Changes: - client: Do not acquire module reference - edid: split out drm_eld, add SAD helpers - format-helper: Cache format conversion buffers - sched: Move from a kthread to a workqueue, rename some internal functions to make it clearer, implement dynamic job-flow control - gpuvm: Provide more features to handle GEM objects - tests: Remove slow kunit tests Driver Changes: - ivpu: Update FW API, new debugfs file, a new NOP job submission test mode, improve suspend/resume, PM improvements, MMU PT optimizations, firmware profiling frequency support, support for uncached buffers, switch to gem shmem helpers, replace kthread with threaded interrupts - panfrost: PM improvements - qaic: Allow to run with a single MSI, support host/device time synchronization, misc improvements - simplefb: Support memory-regions, support power-domains - ssd130x: Unitialized variable fixes - omapdrm: dma-fence lockdep annotation fix - tidss: dma-fence lockdep annotation fix - v3d: Support BCM2712 (RaspberryPi5), Support fdinfo and gputop - panel: - edp: Support AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49 V8.0, plus a whole bunch of panels used on Mediatek chromebooks. Note that the one missing s-o-b for 0da611a87021 ("dma-buf: add dma_fence_timestamp helper") has been supplied here, and rebasing the entire tree with upsetting committers didn't seem worth the trouble: https://lore.kernel.org/dri-devel/ce94020e-a7d4-4799-b87d-fbea7b14a268@gmail.com/ Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/y4awn5vcfy2lr2hpauo7rc4nfpnc6kksr7btmnwaz7zk63pwoi@gwwef5iqpzva
2023-11-17drm/amdgpu: Add function parameter 'xcc_mask' not described in ↵Srinivasan Shanmugam
'amdgpu_vm_flush_compute_tlb' Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1373: warning: Function parameter or member 'xcc_mask' not described in 'amdgpu_vm_flush_compute_tlb' Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amdgpu: add amdgpu runpm usage trace for separate funcsPrike Liang
Add trace for amdgpu runpm separate funcs usage and this will help debugging on the case of runpm usage missed to dereference. In the normal case the runpm usage count referred by one kind of functionality pairwise and usage should be changed from 1 to 0, otherwise there will be an issue in the amdgpu runpm usage dereference. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amdgpu: expose the connected port num info through sysfsShiwu Zhang
By catting the xgmi_port_num sysfs node, it prints out the info in the format of <src node id>:<src port num> -> <dst node id>:<dst port num> for one xgmi link. For example, in case of 4 sockets fully and evenly connected setup, it would be like as below for the first node in the hive. 01:02 -> 02:03 01:03 -> 02:02 01:07 -> 03:04 01:04 -> 03:07 01:06 -> 04:05 01:05 -> 04:06 Based on the fact that there is two xgmi links between each socket pair, "01:02 -> 02:03" means that the current socket in question use the port 2 to connect with port 3 of the second node in the hive and so on. v2: print out the src/dst node id for each xgmi link (lijo) v3: replace the current_node++ with +1 to align with dst node (le) and use the dev_err instead of pr_err (lijo) v4: fix checkpatch warning (alex) Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com> Acked-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amd: Exclude dGPUs in eGPU enclosures from DPM quirksMario Limonciello
The PCIe speed capabilities advertised by a USB4 or TBT3 link are limited to PCIe gen 1 per the USB4 spec. In reality the speed will change dynamically based on fabric conditions and other traffic. DPM is disabled when dGPUs are connected directly to Intel hosts since the PCIe root port isn't able to handle dynamic speed switching. As this limitation is specifically for PCIe root ports in the SoC, don't apply it when connected to an eGPU enclosure connected to an Intel host. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2885 Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amd: Use the first non-dGPU PCI device for BW limitsMario Limonciello
When bandwidth limits are looked up using pcie_bandwidth_available() virtual links such as USB4 are analyzed which might not represent the real speed. Furthermore devices may change speeds autonomously which may introduce conditional variation to the results reported in the status registers. Instead look at the capabilities of first PCI device outside of dGPU to decide upper limits that the dGPU will work at. For eGPU this effectively means that it will use the speed of the link partner. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925#note_2145860 Link: https://www.usb.org/document-library/usb4r-specification-v20 USB4 V2 with Errata and ECN through June 2023 Section 11.2.1 Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amdgpu: Refactor 'amdgpu_connector_dvi_detect' in amdgpu_connectors.cSrinivasan Shanmugam
Fixes the below: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: Missing a blank line after declarations WARNING: Too many leading tabs - consider code refactoring + if (list_connector->connector_type != DRM_MODE_CONNECTOR_VGA) { WARNING: Too many leading tabs - consider code refactoring + if (!amdgpu_display_hpd_sense(adev, amdgpu_connector->hpd.hpd)) { Cc: Guchun Chen <guchun.chen@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17amdgpu: Adjust kmalloc_array calls for new -Walloc-sizeSam James
GCC 14 introduces a new -Walloc-size included in -Wextra which errors out on various files in drivers/gpu/drm/amd/amdgpu like: ``` amdgpu_amdkfd_gfx_v8.c:241:15: error: allocation of insufficient size ‘4’ for type ‘uint32_t[2]’ {aka ‘unsigned int[2]'} with size ‘8’ [-Werror=alloc-size] ``` This is because each HQD_N_REGS is actually a uint32_t[2]. Move the * 2 to the size argument so GCC sees we're allocating enough. Originally did 'sizeof(uint32_t) * 2' for the size but a friend suggested 'sizeof(**dump)' better communicates the intent. Link: https://lore.kernel.org/all/87wmuwo7i3.fsf@gentoo.org/ Signed-off-by: Sam James <sam@gentoo.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amdkfd: Move TLB flushing logic into amdgpuFelix Kuehling
This will make it possible for amdgpu GEM ioctls to flush TLBs on compute VMs. This removes VMID-based TLB flushing and always uses PASID-based flushing. This still works because it scans the VMID-PASID mapping registers to find the right VMID. It's only slightly less efficient. This is not a production use case. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amdgpu: update mappings not managed by KFDFelix Kuehling
When restoring after an eviction, use amdgpu_vm_handle_moved to update BO VA mappings in KFD VMs that are not managed through the KFD API. This should allow using the render node API to create more flexible memory mappings in KFD VMs. v2: rebase on drm_exec changes (Alex) Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amdgpu: Implement a new 64bit sequence memory driverArunpravin Paneer Selvam
Developed a new driver which allocates a 64bit memory on each request in sequence order. At the moment, user queue fence memory is the main consumer of this seq64 driver. v2: Worked on review comments from Christian for the following modifications - Move driver name from "semaphore" to "seq64" - Remove unnecessary PT/PD mapping - Move enable_mes check into init/fini functions. v3: Worked on review comments from Christian - drop enable_mes check - use DECLARE_BITMAP for bit array - added kerneldoc for seq64 v4: Worked on review comments from Christian - Rename amdgpu_seq64_get name with amdgpu_seq64_alloc v5: Worked on review comments from Christian - Fix seq64 lockdep warning - move fpriv->seq64_va check into amdgpu_seq64_unmap() - make the function amdgpu_seq64_unmap() return as void. - reserve the buffers as not interruptible. v6: port to drm_exec (Alex) v7: disable for now (Arun) Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amdgpu/gmc9: disable AGP apertureAlex Deucher
We've had misc reports of random IOMMU page faults when this is used. It's just a rarely used optimization anyway, so let's just disable it. It can still be toggled via the module parameter for testing. v2: leave it configurable via module parameter Reviewed-by: Yang Wang <kevinyang.wang@amd.com> (v1) Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amdgpu/gmc10: disable AGP apertureAlex Deucher
We've had misc reports of random IOMMU page faults when this is used. It's just a rarely used optimization anyway, so let's just disable it. It can still be toggled via the module parameter for testing. v2: leave it configurable via module parameter Reviewed-by: Yang Wang <kevinyang.wang@amd.com> (v1) Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amdgpu/gmc11: disable AGP apertureAlex Deucher
We've had misc reports of random IOMMU page faults when this is used. It's just a rarely used optimization anyway, so let's just disable it. It can still be toggled via the module parameter for testing. v2: leave it configurable via module parameter Fixes: 67318cb84341 ("drm/amdgpu/gmc11: set gart placement GC11") Reviewed-by: Yang Wang <kevinyang.wang@amd.com> (v1) Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amdgpu: add a module parameter to control the AGP apertureAlex Deucher
Add a module parameter to control the AGP aperture. The AGP aperture is an aperture in the GPU's internal address space which provides direct non-paged access to the platform address space. This access is non-snooped so only uncached memory can be accessed. Add a knob so that we can toggle this for debugging. Fixes: 67318cb84341 ("drm/amdgpu/gmc11: set gart placement GC11") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amdgpu/gmc11: fix logic typo in AGP checkAlex Deucher
Should be && rather than ||. Fixes: b2e1cbe6281f ("drm/amdgpu/gmc11: disable AGP on GC 11.5") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amdgpu: add and populate the port num into xgmi topology infoShiwu Zhang
The port num info is firstly introduced with 20.00.01.13 xgmi ta and make them as part of topology info. Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amdgpu: fix ras err_data null pointer issue in amdgpu_ras.cYang Wang
fix ras err_data null pointer issue in amdgpu_ras.c Fixes: 8cc0f5669eb6 ("drm/amdgpu: Support multiple error query modes") Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amdgpu: correct chunk_ptr to a pointer to chunk.YuanShang
The variable "chunk_ptr" should be a pointer pointing to a struct drm_amdgpu_cs_chunk instead of to a pointer of that. Signed-off-by: YuanShang <YuanShang.Mao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amdgpu: Address member 'ring' not described in 'amdgpu_ vce, ↵Srinivasan Shanmugam
uvd_entity_init()' Fixes the following: drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c:237: warning: Function parameter or member 'ring' not described in 'amdgpu_vce_entity_init' drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c:405: warning: Function parameter or member 'ring' not described in 'amdgpu_uvd_entity_init' Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amdgpu: finalizing mem_partitions at the end of GMC v9 sw_finiLe Ma
The valid num_mem_partitions is required during ttm pool fini, thus move the cleanup at the end of the function. Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amdgpu: Do not program VF copy regs in mmhub v1.8 under SRIOV (v2)Victor Lu
MC_VM_AGP_* registers should not be programmed by guest driver. v2: move early return outside of loop Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Samir Dhume <samir.dhume@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-15Merge drm/drm-next into drm-misc-nextMaxime Ripard
Let's kickstart the v6.8 release cycle. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-10Merge tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Daniel Vetter: "Dave's VPN to the big machine died, so it's on me to do fixes pr this and next week while everyone else is at plumbers. - big pile of amd fixes, but mostly for hw support newly added in 6.7 - i915 fixes, mostly minor things - qxl memory leak fix - vc4 uaf fix in mock helpers - syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE" * tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits) drm/amdgpu: fix error handling in amdgpu_vm_init drm/amdgpu: Fix possible null pointer dereference drm/amdgpu: move UVD and VCE sched entity init after sched init drm/amdgpu: move kfd_resume before the ip late init drm/amd: Explicitly check for GFXOFF to be enabled for s0ix drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2) drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5) drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support drm/amdgpu: fix software pci_unplug on some chips drm/amd/display: remove duplicated argument drm/amdgpu: correct mca debugfs dump reg list drm/amdgpu: correct acclerator check architecutre dump drm/amdgpu: add pcs xgmi v6.4.0 ras support drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3 drm/amdgpu: disable smu v13.0.6 mca debug mode by default drm/amdgpu: Support multiple error query modes drm/amdgpu: refine smu v13.0.6 mca dump driver drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2) drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV drm: amd: Resolve Sphinx unexpected indentation warning ...
2023-11-10Merge tag 'amd-drm-next-6.7-2023-11-10' of ↵Daniel Vetter
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.7-2023-11-10: amdgpu: - SR-IOV fixes - DMCUB fixes - DCN3.5 fixes - DP2 fixes - SubVP fixes - SMU14 fixes - SDMA4.x fixes - Suspend/resume fixes - AGP regression fix - UAF fixes for some error cases - SMU 13.0.6 fixes - Documentation fixes - RAS fixes - Hotplug fixes - Scheduling entity ordering fix - GPUVM fixes Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231110190703.4741-1-alexander.deucher@amd.com
2023-11-10drm/amdgpu: fix error handling in amdgpu_vm_initChristian König
When clearing the root PD fails we need to properly release it again. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-11-10drm/amdgpu: Fix possible null pointer dereferenceFelix Kuehling
mem = bo->tbo.resource may be NULL in amdgpu_vm_bo_update. Fixes: 180253782038 ("drm/ttm: stop allocating dummy resources during BO creation") Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-11-10drm/amdgpu: move UVD and VCE sched entity init after sched initAlex Deucher
We need kernel scheduling entities to deal with handle clean up if apps are not cleaned up properly. With commit 56e449603f0ac5 ("drm/sched: Convert the GPU scheduler to variable number of run-queues") the scheduler entities have to be created after scheduler init, so change the ordering to fix this. v2: Leave logic in UVD and VCE code Fixes: 56e449603f0a ("drm/sched: Convert the GPU scheduler to variable number of run-queues") Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Luben Tuikov <ltuikov89@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: ltuikov89@gmail.com
2023-11-10drm/amdgpu: move kfd_resume before the ip late initTim Huang
The kfd_resume needs to touch GC registers to enable the interrupts, it needs to be done before GFXOFF is enabled to ensure that the GFX is not off and GC registers can be touched. So move kfd_resume before the amdgpu_device_ip_late_init which enables the CGPG/GFXOFF. Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.51.0) at 2026-11-05 12:09:44 +0000