summaryrefslogtreecommitdiff
path: root/drivers/edac
AgeCommit message (Collapse)Author
2021-11-26EDAC/sb_edac: Fix top-of-high-memory value for Broadwell/HaswellEric Badger
commit 537bddd069c743759addf422d0b8f028ff0f8dbc upstream. The computation of TOHM is off by one bit. This missed bit results in too low a value for TOHM, which can cause errors in regular memory to incorrectly report: EDAC MC0: 1 CE Error at MMIOH area, on addr 0x000000207fffa680 on any memory Fixes: 50d1bb93672f ("sb_edac: add support for Haswell based systems") Cc: stable@vger.kernel.org Reported-by: Meeta Saggi <msaggi@purestorage.com> Signed-off-by: Eric Badger <ebadger@purestorage.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20211010170127.848113-1-ebadger@purestorage.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-06EDAC/synopsys: Fix wrong value type assignment for edac_modeSai Krishna Potthuri
commit 5297cfa6bdf93e3889f78f9b482e2a595a376083 upstream. dimm->edac_mode contains values of type enum edac_type - not the corresponding capability flags. Fix that. Issue caught by Coverity check "enumerated type mixed with another type." [ bp: Rewrite commit message, add tags. ] Fixes: ae9b56e3996d ("EDAC, synps: Add EDAC support for zynq ddr ecc controller") Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20210818072315.15149-1-shubhrajyoti.datta@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29EDAC/i5100: Fix error handling order in i5100_init_one()Dinghao Liu
[ Upstream commit 857a3139bd8be4f702c030c8ca06f3fd69c1741a ] When pci_get_device_func() fails, the driver doesn't need to execute pci_dev_put(). mci should still be freed, though, to prevent a memory leak. When pci_enable_device() fails, the error injection PCI device "einj" doesn't need to be disabled either. [ bp: Massage commit message, rename label to "bail_mc_free". ] Fixes: 52608ba205461 ("i5100_edac: probe for device 19 function 0") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200826121437.31606-1-dinghao.liu@zju.edu.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03EDAC/ie31200: Fallback if host bridge device is already initializedJason Baron
[ Upstream commit 709ed1bcef12398ac1a35c149f3e582db04456c2 ] The Intel uncore driver may claim some of the pci ids from ie31200 which means that the ie31200 edac driver will not initialize them as part of pci_register_driver(). Let's add a fallback for this case to 'pci_get_device()' to get a reference on the device such that it can still be configured. This is similar in approach to other edac drivers. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: Borislav Petkov <bp@suse.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/1594923911-10885-1-git-send-email-jbaron@akamai.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21EDAC: Fix reference count leaksQiushi Wu
[ Upstream commit 17ed808ad243192fb923e4e653c1338d3ba06207 ] When kobject_init_and_add() returns an error, it should be handled because kobject_init_and_add() takes a reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Therefore, replace calling kfree() and call kobject_put() and add a missing kobject_put() in the edac_device_register_sysfs_main_kobj() error path. [ bp: Massage and merge into a single patch. ] Fixes: b2ed215a3338 ("Kobject: change drivers/edac to use kobject_init_and_add") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200528202238.18078-1-wu000273@umn.edu Link: https://lkml.kernel.org/r/20200528203526.20908-1-wu000273@umn.edu Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-09EDAC/amd64: Read back the scrub rate PCI register on F15hBorislav Petkov
[ Upstream commit ee470bb25d0dcdf126f586ec0ae6dca66cb340a4 ] Commit: da92110dfdfa ("EDAC, amd64_edac: Extend scrub rate support to F15hM60h") added support for F15h, model 0x60 CPUs but in doing so, missed to read back SCRCTRL PCI config register on F15h CPUs which are *not* model 0x60. Add that read so that doing $ cat /sys/devices/system/edac/mc/mc0/sdram_scrub_rate can show the previously set DRAM scrub rate. Fixes: da92110dfdfa ("EDAC, amd64_edac: Extend scrub rate support to F15hM60h") Reported-by: Anders Andersson <pipatron@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> #v4.4.. Link: https://lkml.kernel.org/r/CAKkunMbNWppx_i6xSdDHLseA2QQmGJqj_crY=NF-GZML5np4Vw@mail.gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-11x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_steppingJia Zhang
commit b399151cb48db30ad1e0e93dd40d68c6d007b637 upstream. x86_mask is a confusing name which is hard to associate with the processor's stepping. Additionally, correct an indent issue in lib/cpu.c. [ Backport by Mark Gross to simplify the SRBDS backport ] Signed-off-by: Jia Zhang <qianyue.zj@alibaba-inc.com> [ Updated it to more recent kernels. ] Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04EDAC/ghes: Fix grain calculationRobert Richter
[ Upstream commit 7088e29e0423d3195e09079b4f849ec4837e5a75 ] The current code to convert a physical address mask to a grain (defined as granularity in bytes) is: e->grain = ~(mem_err->physical_addr_mask & ~PAGE_MASK); This is broken in several ways: 1) It calculates to wrong grain values. E.g., a physical address mask of ~0xfff should give a grain of 0x1000. Without considering PAGE_MASK, there is an off-by-one. Things are worse when also filtering it with ~PAGE_MASK. This will calculate to a grain with the upper bits set. In the example it even calculates to ~0. 2) The grain does not depend on and is unrelated to the kernel's page-size. The page-size only matters when unmapping memory in memory_failure(). Smaller grains are wrongly rounded up to the page-size, on architectures with a configurable page-size (e.g. arm64) this could round up to the even bigger page-size of the hypervisor. Fix this with: e->grain = ~mem_err->physical_addr_mask + 1; The grain_bits are defined as: grain = 1 << grain_bits; Change also the grain_bits calculation accordingly, it is the same formula as in edac_mc.c now and the code can be unified. The value in ->physical_addr_mask coming from firmware is assumed to be contiguous, but this is not sanity-checked. However, in case the mask is non-contiguous, a conversion to grain_bits effectively converts the grain bit mask to a power of 2 by rounding it up. Suggested-by: James Morse <james.morse@arm.com> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106093239.25517-11-rrichter@marvell.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-04EDAC: Fix global-out-of-bounds write when setting edac_mc_poll_msecEiichi Tsukata
[ Upstream commit d8655e7630dafa88bc37f101640e39c736399771 ] Commit 9da21b1509d8 ("EDAC: Poll timeout cannot be zero, p2") assumes edac_mc_poll_msec to be unsigned long, but the type of the variable still remained as int. Setting edac_mc_poll_msec can trigger out-of-bounds write. Reproducer: # echo 1001 > /sys/module/edac_core/parameters/edac_mc_poll_msec KASAN report: BUG: KASAN: global-out-of-bounds in edac_set_poll_msec+0x140/0x150 Write of size 8 at addr ffffffffb91b2d00 by task bash/1996 CPU: 1 PID: 1996 Comm: bash Not tainted 5.2.0-rc6+ #23 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 Call Trace: dump_stack+0xca/0x13e print_address_description.cold+0x5/0x246 __kasan_report.cold+0x75/0x9a ? edac_set_poll_msec+0x140/0x150 kasan_report+0xe/0x20 edac_set_poll_msec+0x140/0x150 ? dimmdev_location_show+0x30/0x30 ? vfs_lock_file+0xe0/0xe0 ? _raw_spin_lock+0x87/0xe0 param_attr_store+0x1b5/0x310 ? param_array_set+0x4f0/0x4f0 module_attr_store+0x58/0x80 ? module_attr_show+0x80/0x80 sysfs_kf_write+0x13d/0x1a0 kernfs_fop_write+0x2bc/0x460 ? sysfs_kf_bin_read+0x270/0x270 ? kernfs_notify+0x1f0/0x1f0 __vfs_write+0x81/0x100 vfs_write+0x1e1/0x560 ksys_write+0x126/0x250 ? __ia32_sys_read+0xb0/0xb0 ? do_syscall_64+0x1f/0x390 do_syscall_64+0xc1/0x390 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fa7caa5e970 Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 04 RSP: 002b:00007fff6acfdfe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fa7caa5e970 RDX: 0000000000000005 RSI: 0000000000e95c08 RDI: 0000000000000001 RBP: 0000000000e95c08 R08: 00007fa7cad1e760 R09: 00007fa7cb36a700 R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000005 R13: 0000000000000001 R14: 00007fa7cad1d600 R15: 0000000000000005 The buggy address belongs to the variable: edac_mc_poll_msec+0x0/0x40 Memory state around the buggy address: ffffffffb91b2c00: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa ffffffffb91b2c80: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa >ffffffffb91b2d00: 04 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa ^ ffffffffb91b2d80: 04 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 ffffffffb91b2e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fix it by changing the type of edac_mc_poll_msec to unsigned int. The reason why this patch adopts unsigned int rather than unsigned long is msecs_to_jiffies() assumes arg to be unsigned int. We can avoid integer conversion bugs and unsigned int will be large enough for edac_mc_poll_msec. Reviewed-by: James Morse <james.morse@arm.com> Fixes: 9da21b1509d8 ("EDAC: Poll timeout cannot be zero, p2") Signed-off-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-04EDAC/sysfs: Fix memory leak when creating a csrow objectPan Bian
[ Upstream commit 585fb3d93d32dbe89e718b85009f9c322cc554cd ] In edac_create_csrow_object(), the reference to the object is not released when adding the device to the device hierarchy fails (device_add()). This may result in a memory leak. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Link: https://lkml.kernel.org/r/1555554438-103953-1-git-send-email-bianpan2016@163.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-10-10EDAC, i7core: Fix memleaks and use-after-free on probe and removeJohan Hovold
[ Upstream commit 6c974d4dfafe5e9ee754f2a6fba0eb1864f1649e ] Make sure to free and deregister the addrmatch and chancounts devices allocated during probe in all error paths. Also fix use-after-free in a probe error path and in the remove success path where the devices were being put before before deregistration. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Fixes: 356f0a30860d ("i7core_edac: change the mem allocation scheme to make Documentation/kobject.txt happy") Link: http://lkml.kernel.org/r/20180612124335.6420-2-johan@kernel.org Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13EDAC, mv64x60: Fix an error handling pathChristophe JAILLET
[ Upstream commit 68fa24f9121c04ef146b5158f538c8b32f285be5 ] We should not call edac_mc_del_mc() if a corresponding call to edac_mc_add_mc() has not been performed yet. So here, we should go to err instead of err2 to branch at the right place of the error handling path. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180107205400.14068-1-christophe.jaillet@wanadoo.fr Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-16EDAC, octeon: Fix an uninitialized variable warningJames Hogan
commit 544e92581a2ac44607d7cc602c6b54d18656f56d upstream. Fix an uninitialized variable warning in the Octeon EDAC driver, as seen in MIPS cavium_octeon_defconfig builds since v4.14 with Codescape GNU Tools 2016.05-03: drivers/edac/octeon_edac-lmc.c In function ‘octeon_lmc_edac_poll_o2’: drivers/edac/octeon_edac-lmc.c:87:24: warning: ‘((long unsigned int*)&int_reg)[1]’ may \ be used uninitialized in this function [-Wmaybe-uninitialized] if (int_reg.s.sec_err || int_reg.s.ded_err) { ^ Iinitialise the whole int_reg variable to zero before the conditional assignments in the error injection case. Signed-off-by: James Hogan <jhogan@kernel.org> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linux-mips@linux-mips.org Fixes: 1bc021e81565 ("EDAC: Octeon: Add error injection support") Link: http://lkml.kernel.org/r/20171113161206.20990-1-james.hogan@mips.com Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16EDAC, i5000, i5400: Fix definition of NRECMEMB registerJérémy Lefaure
[ Upstream commit a8c8261425649da58bdf08221570e5335ad33a31 ] In the i5000 and i5400 drivers, the NRECMEMB register is defined as a 16-bit value, which results in wrong shifts in the code, as reported by sparse. In the datasheets ([1], section 3.9.22.20 and [2], section 3.9.22.21), this register is a 32-bit register. A u32 value for the register fixes the wrong shifts warnings and matches the datasheet. Also fix the mask to access to the CAS bits [27:16] in the i5000 driver. [1]: https://www.intel.com/content/dam/doc/datasheet/5000p-5000v-5000z-chipset-memory-controller-hub-datasheet.pdf [2]: https://www.intel.se/content/dam/doc/datasheet/5400-chipset-memory-controller-hub-datasheet.pdf Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170629005729.8478-1-jeremy.lefaure@lse.epita.fr Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16EDAC, i5000, i5400: Fix use of MTR_DRAM_WIDTH macroJérémy Lefaure
[ Upstream commit e61555c29c28a4a3b6ba6207f4a0883ee236004d ] The MTR_DRAM_WIDTH macro returns the data width. It is sometimes used as if it returned a boolean true if the width if 8. Fix the tests where MTR_DRAM_WIDTH is misused. Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170309011809.8340-1-jeremy.lefaure@lse.epita.fr Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-09EDAC, sb_edac: Fix missing break in switchGustavo A. R. Silva
[ Upstream commit a8e9b186f153a44690ad0363a56716e7077ad28c ] Add missing break statement in order to prevent the code from falling through. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20171016174029.GA19757@embeddedor.com Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07EDAC: Increment correct counter in edac_inc_ue_error()Emmanouil Maroudas
commit 993f88f1cc7f0879047ff353e824e5cc8f10adfc upstream. Fix typo in edac_inc_ue_error() to increment ue_noinfo_count instead of ce_noinfo_count. Signed-off-by: Emmanouil Maroudas <emmanouil.maroudas@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Fixes: 4275be635597 ("edac: Change internal representation to work with layers") Link: http://lkml.kernel.org/r/1461425580-5898-1-git-send-email-emmanouil.maroudas@gmail.com Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20EDAC: Correct channel count limitBorislav Petkov
commit bba142957e04c400440d2df83c1b3b2dfc42e220 upstream. c44696fff04f ("EDAC: Remove arbitrary limit on number of channels") lifted the arbitrary limit on memory controller channels in EDAC. However, the dynamic channel attributes dynamic_csrow_dimm_attr and dynamic_csrow_ce_count_attr remained 6. This wasn't a problem except channels 6 and 7 weren't visible in sysfs on machines with more than 6 channels after the conversion to static attr groups with 2c1946b6d629 ("EDAC: Use static attribute groups for managing sysfs entries") [ without that, we're exploding in edac_create_sysfs_mci_device() because we're dereferencing out of the bounds of the dynamic_csrow_dimm_attr array. ] Add attributes for channels 6 and 7 along with a guard for the future, should more channels be required and/or to sanity check for misconfigured machines. We still need to check against the number of channels present on the MC first, as Thor reported. Signed-off-by: Borislav Petkov <bp@suse.de> Reported-by: Hironobu Ishii <ishii.hironobu@jp.fujitsu.com> Tested-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27EDAC, sb_edac: Fix rank lookup on BroadwellTony Luck
commit c7103f650a11328f28b9fa1c95027db331b7774b upstream. Broadwell made a small change to the rank target register moving the target rank ID field up from bits 16:19 to bits 20:23. Also found that the offset field grew by one bit in the IVY_BRIDGE to HASWELL transition, so fix the RIR_OFFSET() macro too. Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/2943fb819b1f7e396681165db9c12bb3df0e0b16.1464735623.git.tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callbackTony Luck
commit c4fc1956fa31003bfbe4f597e359d751568e2954 upstream. Both of these drivers can return NOTIFY_BAD, but this terminates processing other callbacks that were registered later on the chain. Since the driver did nothing to log the error it seems wrong to prevent other interested parties from seeing it. E.g. neither of them had even bothered to check the type of the error to see if it was a memory error before the return NOTIFY_BAD. Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/72937355dd92318d2630979666063f8a2853495b.1461864507.git.tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04x86 EDAC, sb_edac.c: Repair damage introduced when "fixing" channel addressTony Luck
commit ff15e95c82768d589957dbb17d7eb7dba7904659 upstream. In commit: eb1af3b71f9d ("Fix computation of channel address") I switched the "sck_way" variable from holding the log2 value read from the h/w to instead be the actual number. Unfortunately it is needed in log2 form when used to shift the address. Tested-by: Patrick Geary <patrickg@supermicro.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac@vger.kernel.org Fixes: eb1af3b71f9d ("Fix computation of channel address") Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-12EDAC, amd64_edac: Shift wrapping issue in f1x_get_norm_dct_addr()Dan Carpenter
commit 6f3508f61c814ee852c199988a62bd954c50dfc1 upstream. dct_sel_base_off is declared as a u64 but we're only using the lower 32 bits because of a shift wrapping bug. This can possibly truncate the upper 16 bits of DctSelBaseOffset[47:26], causing us to misdecode the CS row. Fixes: c8e518d5673d ('amd64_edac: Sanitize f10_get_base_addr_offset') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20160120095451.GB19898@mwanda Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-12EDAC/sb_edac: Fix computation of channel addressTony Luck
commit eb1af3b71f9d83e45f2fd2fd649356e98e1c582c upstream. Large memory Haswell-EX systems with multiple DIMMs per channel were sometimes reporting the wrong DIMM. Found three problems: 1) Debug printouts for socket and channel interleave were not interpreting the register fields correctly. The socket interleave field is a 2^X value (0=1, 1=2, 2=4, 3=8). The channel interleave is X+1 (0=1, 1=2, 2=3. 3=4). 2) Actual use of the socket interleave value didn't interpret as 2^X 3) Conversion of address to channel address was complicated, and wrong. Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03EDAC, mc_sysfs: Fix freeing bus' nameBorislav Petkov
commit 12e26969b32c79018165d52caff3762135614aa1 upstream. I get the splat below when modprobing/rmmoding EDAC drivers. It happens because bus->name is invalid after bus_unregister() has run. The Code: section below corresponds to: .loc 1 1108 0 movq 672(%rbx), %rax # mci_1(D)->bus, mci_1(D)->bus .loc 1 1109 0 popq %rbx # .loc 1 1108 0 movq (%rax), %rdi # _7->name, jmp kfree # and %rax has some funky stuff 2030203020312030 which looks a lot like something walked over it. Fix that by saving the name ptr before doing stuff to string it points to. general protection fault: 0000 [#1] SMP Modules linked in: ... CPU: 4 PID: 10318 Comm: modprobe Tainted: G I EN 3.12.51-11-default+ #48 Hardware name: HP ProLiant DL380 G7, BIOS P67 05/05/2011 task: ffff880311320280 ti: ffff88030da3e000 task.ti: ffff88030da3e000 RIP: 0010:[<ffffffffa019da92>] [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP: 0018:ffff88030da3fe28 EFLAGS: 00010292 RAX: 2030203020312030 RBX: ffff880311b4e000 RCX: 000000000000095c RDX: 0000000000000001 RSI: ffff880327bb9600 RDI: 0000000000000286 RBP: ffff880311b4e750 R08: 0000000000000000 R09: ffffffff81296110 R10: 0000000000000400 R11: 0000000000000000 R12: ffff88030ba1ac68 R13: 0000000000000001 R14: 00000000011b02f0 R15: 0000000000000000 FS: 00007fc9bf8f5700(0000) GS:ffff8801a7c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000403c90 CR3: 000000019ebdf000 CR4: 00000000000007e0 Stack: Call Trace: i7core_unregister_mci.isra.9 i7core_remove pci_device_remove __device_release_driver driver_detach bus_remove_driver pci_unregister_driver i7core_exit SyS_delete_module system_call_fastpath 0x7fc9bf426536 Code: 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 48 89 fb e8 52 2a 1f e1 48 8b bb a0 02 00 00 e8 46 59 1f e1 48 8b 83 a0 02 00 00 5b <48> 8b 38 e9 26 9a fe e0 66 0f 1f 44 00 00 66 66 66 66 90 48 8b RIP [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP <ffff88030da3fe28> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Fixes: 7a623c039075 ("edac: rewrite the sysfs code to use struct device") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03EDAC: Robustify workqueues destructionBorislav Petkov
commit fcd5c4dd8201595d4c598c9cca5e54760277d687 upstream. EDAC workqueue destruction is really fragile. We cancel delayed work but if it is still running and requeues itself, we still go ahead and destroy the workqueue and the queued work explodes when workqueue core attempts to run it. Make the destruction more robust by switching op_state to offline so that requeuing stops. Cancel any pending work *synchronously* too. EDAC i7core: Driver loaded. general protection fault: 0000 [#1] SMP CPU 12 Modules linked in: Supported: Yes Pid: 0, comm: kworker/0:1 Tainted: G IE 3.0.101-0-default #1 HP ProLiant DL380 G7 RIP: 0010:[<ffffffff8107dcd7>] [<ffffffff8107dcd7>] __queue_work+0x17/0x3f0 < ... regs ...> Process kworker/0:1 (pid: 0, threadinfo ffff88019def6000, task ffff88019def4600) Stack: ... Call Trace: call_timer_fn run_timer_softirq __do_softirq call_softirq do_softirq irq_exit smp_apic_timer_interrupt apic_timer_interrupt intel_idle cpuidle_idle_call cpu_idle Code: ... RIP __queue_work RSP <...> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-06Merge tag 'asm-generic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanups from Arnd Bergmann: "The asm-generic changes for 4.4 are mostly a series from Christoph Hellwig to clean up various abuses of headers in there. The patch to rename the io-64-nonatomic-*.h headers caused some conflicts with new users, so I added a workaround that we can remove in the next merge window. The only other patch is a warning fix from Marek Vasut" * tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: temporarily add back asm-generic/io-64-nonatomic*.h asm-generic: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations gpio-mxc: stop including <asm-generic/bug> n_tracesink: stop including <asm-generic/bug> n_tracerouter: stop including <asm-generic/bug> mlx5: stop including <asm-generic/kmap_types.h> hifn_795x: stop including <asm-generic/kmap_types.h> drbd: stop including <asm-generic/kmap_types.h> move count_zeroes.h out of asm-generic move io-64-nonatomic*.h out of asm-generic
2015-11-03Merge branch 'ras-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS changes from Ingo Molnar: "The main system reliability related changes were from x86, but also some generic RAS changes: - AMD MCE error injection subsystem enhancements. (Aravind Gopalakrishnan) - Fix MCE and CPU hotplug interaction bug. (Ashok Raj) - kcrash bootup robustness fix. (Baoquan He) - kcrash cleanups. (Borislav Petkov) - x86 microcode driver rework: simplify it by unmodularizing it and other cleanups. (Borislav Petkov)" * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/mce: Add a default case to the switch in __mcheck_cpu_ancient_init() x86/mce: Add a Scalable MCA vendor flags bit MAINTAINERS: Unify the microcode driver section x86/microcode/intel: Move #ifdef DEBUG inside the function x86/microcode/amd: Remove maintainers from comments x86/microcode: Remove modularization leftovers x86/microcode: Merge the early microcode loader x86/microcode: Unmodularize the microcode driver x86/mce: Fix thermal throttling reporting after kexec kexec/crash: Say which char is the unrecognized x86/setup/crash: Check memblock_reserve() retval x86/setup/crash: Cleanup some more x86/setup/crash: Remove alignment variable x86/setup: Cleanup crashkernel reservation functions x86/amd_nb, EDAC: Rename amd_get_node_id() x86/setup: Do not reserve crashkernel high memory if low reservation failed x86/microcode/amd: Do not overwrite final patch levels x86/microcode/amd: Extract current patch level read to a function x86/ras/mce_amd_inj: Inject bank 4 errors on the NBC x86/ras/mce_amd_inj: Trigger deferred and thresholding errors interrupts ...
2015-10-22EDAC: Fix PAGES_TO_MiB macro misuseTan Xiaojun
The PAGES_TO_MiB macro is used for unit conversion but the trace_mc_event() tracepoint expects a page address. Fix that. Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1445341538-24271-1-git-send-email-tanxiaojun@huawei.com Signed-off-by: Borislav Petkov <bp@suse.de>
2015-10-21x86/amd_nb, EDAC: Rename amd_get_node_id()Aravind Gopalakrishnan
This function doesn't give us the "Node ID" as the function name suggests. Rather, it receives a PCI device as argument, checks the available F3 PCI device IDs in the system and returns the index of the matching Bus/Device IDs. Rename it to amd_pci_dev_to_node_id(). No functional change is introduced. Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1445246268-26285-3-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-15EDAC, altera: SoCFPGA EDAC should not look for ECC_CORR_ENDinh Nguyen
The bootloader may or may not enable the ECC_CORR_EN bit. By not enabling ECC_CORR_EN, when error happens, it is the user's responsibility to perform a full SDRAM scrub. Remove the check for ECC_CORR_EN. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Thor Thayer <tthayer@opensource.altera.com> Link: http://lkml.kernel.org/r/1444864456-21778-1-git-send-email-dinguyen@opensource.altera.com Signed-off-by: Borislav Petkov <bp@suse.de>
2015-10-15move io-64-nonatomic*.h out of asm-genericChristoph Hellwig
These are not implementations of default architecture code but helpers for drivers. Move them to the place they belong to. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-14EDAC: Use edac_debugfs_remove_recursive()Tan Xiaojun
debugfs_remove() is used to remove a file or a directory from the debugfs filesystem, but mci->debugfs might not empty. This can be triggered by the following sequence: 1) Enable CONFIG_EDAC_DEBUG 2) insmod an EDAC module (like i3000_edac or similar) 3) rmmod this module 4) we can see files remaining under <debugfs_mountpoint>/edac/ like "fake_inject", for example. Removing edac_core then, causes a NULL pointer dereference. Reported-by: Yun Wu (Abel) <wuyun.wu@huawei.com> Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1444787364-104353-1-git-send-email-tanxiaojun@huawei.com Signed-off-by: Borislav Petkov <bp@suse.de>
2015-10-03EDAC, ppc4xx_edac: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has an OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20150917114619.GA13145@goodgumbo.baconseed.org Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-29EDAC, amd64_edac: Update copyright and remove changelogAravind Gopalakrishnan
Git provides us all the changelogs anyway. So trim the comments section here. Update the copyrights info while at it. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1443440593-2316-3-git-send-email-Aravind.Gopalakrishnan@amd.com Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-29EDAC, amd64_edac: Extend scrub rate support to F15hM60hAravind Gopalakrishnan
The scrub rate control register has moved to function 2 in PCI config space and is at a different offset on family 0x15, models 0x60 and later. The minimum recommended scrub rate has also changed. (Refer to D18F2x1c9_dct[1:0][DramScrub] in Fam15hM60h BKDG). Adjust set_scrub_rate() and get_scrub_rate() functions to accommodate this. Tested on F15hM60h, Fam15h, models 00h-0fh and Fam10h systems. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1443440593-2316-2-git-send-email-Aravind.Gopalakrishnan@amd.com [ Cleanup conditionals. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-28EDAC: Don't allow empty DIMM labelsToshi Kani
Updating dimm_label to an empty string does not make much sense. Change the sysfs dimm_label store operation to fail a request when an input string is empty. Suggested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: elliott@hpe.com Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1443124767.25474.172.camel@hpe.com Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-25EDAC: Fix sysfs dimm_label store operationToshi Kani
Sysfs "dimm_label" and "chX_dimm_label" nodes have the following issues in their store operation: 1) A newline-terminated input string causes redundant newlines: # echo "test" > /sys/bus/mc0/devices/dimm0/dimm_label # cat /sys/bus/mc0/devices/dimm0/dimm_label test # od -bc /sys/bus/mc0/devices/dimm0/dimm_label 0000000 164 145 163 164 012 012 t e s t \n \n 0000006 2) The original label string (31 characters) cannot be stored due to an improper size check: # echo "CPU_SrcID#0_Ha#0_Chan#0_DIMM#0" > /sys/bus/mc0/devices/dimm0/dimm_label # cat /sys/bus/mc0/devices/dimm0/dimm_label # od -bc /sys/bus/mc0/devices/dimm0/dimm_label 0000000 012 012 \n \n 0000002 3) An input string longer than the buffer size results a wrong label info as it allows a retry with the remaining string: # echo "CPU_SrcID#0_Ha#0_Chan#0_DIMM#0_TEST" > /sys/bus/mc0/devices/dimm0/dimm_label # cat /sys/bus/mc0/devices/dimm0/dimm_label _TEST Fix these issues by making the following changes: 1) Replace a newline character at the end by setting a null. It also assures that the string is null-terminated in the label buffer. 2) Check the label buffer size with 'sizeof(dimm->label)'. 3) Fail a request if its string exceeds the label buffer size. Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Acked-by: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Robert Elliott <elliott@hpe.com> Link: http://lkml.kernel.org/r/1443121564.25474.160.camel@hpe.com Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-25EDAC: Fix sysfs dimm_label show operationToshi Kani
After 7d375bffa524 ("sb_edac: Fix support for systems with two home agents per socket") sysfs "dimm_label" and "chX_dimm_label" show their label string without a newline "\n" at the end. [root@orange ~]# cat /sys/bus/mc0/devices/dimm0/dimm_label CPU_SrcID#0_Ha#0_Chan#0_DIMM#0[root@orange ~]# [root@orange ~]# cat /sys/devices/system/edac/mc/mc0/csrow0/ch0_dimm_label CPU_SrcID#0_Ha#0_Chan#0_DIMM#0[root@orange ~]# The label strings now have 31 characters, which are the same as EDAC_MC_LABEL_LEN. Since the snprintf()s in channel_dimm_label_show() and dimmdev_label_show() limit the whole length by EDAC_MC_LABEL_LEN, the newline in the format "%s\n" is ignored. [root@orange ~]# od -bc /sys/bus/mc0/devices/dimm0/dimm_label 0000000 103 120 125 137 123 162 143 111 104 043 060 137 110 141 043 060 C P U _ S r c I D # 0 _ H a # 0 0000020 137 103 150 141 156 043 060 137 104 111 115 115 043 060 000 _ C h a n # 0 _ D I M M # 0 \0 0000037 Fix it by using 'sizeof(dimm->label) + 1' as the whole length in the snprintf()s in channel_dimm_label_show() and dimmdev_label_show(). Reported-by: Robert Elliott <elliott@hpe.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Acked-by: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Link: http://lkml.kernel.org/r/1442933883-21587-2-git-send-email-toshi.kani@hpe.com Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-25EDAC, xgene: Add SoC supportLoc Ho
Add support for the SoC component. Signed-off-by: Loc Ho <lho@apm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: devicetree@vger.kernel.org Cc: ijc+devicetree@hellion.org.uk Cc: jcm@redhat.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: mark.rutland@arm.com Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: patches@apm.com Cc: robh+dt@kernel.org Link: http://lkml.kernel.org/r/1443055261-8613-4-git-send-email-lho@apm.com Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-25EDAC, xgene: Fix possible sprintf() overflow issueLoc Ho
Replace sprintf() with snprintf() to avoid possible string array overflow. Signed-off-by: Loc Ho <lho@apm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: devicetree@vger.kernel.org Cc: ijc+devicetree@hellion.org.uk Cc: jcm@redhat.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: mark.rutland@arm.com Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: patches@apm.com Cc: robh+dt@kernel.org Link: http://lkml.kernel.org/r/1443116287-11752-1-git-send-email-lho@apm.com Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-25EDAC, xgene: Add L3 supportLoc Ho
Add EDAC support for the L3 component. Signed-off-by: Loc Ho <lho@apm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: devicetree@vger.kernel.org Cc: ijc+devicetree@hellion.org.uk Cc: jcm@redhat.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: mark.rutland@arm.com Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: patches@apm.com Cc: robh+dt@kernel.org Link: http://lkml.kernel.org/r/1443055261-8613-3-git-send-email-lho@apm.com Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-24EDAC, sb_edac: Fix TAD presence check for sbridge_mci_bind_devs()Seth Jennings
In commit 7d375bffa524 ("sb_edac: Fix support for systems with two home agents per socket") NUM_CHANNELS was changed to 8 and the channel space was renumerated to handle EN, EP, and EX configurations. The *_mci_bind_devs() functions - except for sbridge_mci_bind_devs() - got a new device presence check in the form of saw_chan_mask. However, sbridge_mci_bind_devs() still uses the NUM_CHANNELS for loop. With the increase in NUM_CHANNELS, this loop fails at index 4 since SB only has 4 TADs. This results in the following error on SB machines: EDAC sbridge: Some needed devices are missing EDAC sbridge: Couldn't find mci handler EDAC sbridge: Couldn't find mci handle This patch adapts the saw_chan_mask logic for sbridge_mci_bind_devs() as well. After this patch: EDAC MC0: Giving out device to module sbridge_edac.c controller Sandy Bridge Socket#0: DEV 0000:3f:0e.0 (POLLED) EDAC MC1: Giving out device to module sbridge_edac.c controller Sandy Bridge Socket#1: DEV 0000:7f:0e.0 (POLLED) Signed-off-by: Seth Jennings <sjenning@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Tony Luck <tony.luck@intel.com> Tested-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> # v4.2 Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1438798561-10180-1-git-send-email-sjenning@redhat.com Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-23EDAC, ghes_edac: Remove redundant memory_type arrayAravind Gopalakrishnan
We already have edac_mem_types[] that enumerates the different kinds of memory. So, use that and remove the redundant memory_type[] array here. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1442436811-23382-2-git-send-email-Aravind.Gopalakrishnan@amd.com Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-23EDAC, xgene: Convert to debugfs wrappersBorislav Petkov
Drop CONFIG_EDAC_DEBUG ifdeffery too, while at it. Tested-by: Loc Ho <lho@apm.com> Cc: linux-edac@vger.kernel.org Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-22EDAC, i5100: Convert to debugfs wrappersBorislav Petkov
This driver creates its debugfs hierarchy under the toplevel debugfs dir - see i5100_init() - so make it use edac_debugfs_create_dir_at( , NULL) because we're not breaking userspace. Oh well. Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-22EDAC, altera: Convert to debugfs wrappersBorislav Petkov
Use the EDAC-specific wrappers. Drop CONFIG_EDAC_DEBUG ifdeffery. Cc: Thor Thayer <tthayer@opensource.altera.com> Cc: <linux-edac@vger.kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-22EDAC: Add debugfs wrappersBorislav Petkov
Later patches will convert EDAC users to those. Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-22EDAC: Carve out debugfs functionalityBorislav Petkov
... into a separate compilation unit and drop a couple of CONFIG_EDAC_DEBUG ifdefferies. Rename edac_create_debug_nodes() to edac_create_debugfs_nodes(), while at it. No functionality change. Cc: <linux-edac@vger.kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2015-09-11Merge tag 'edac/v4.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull edac updates from Mauro Carvalho Chehab: "Two EDAC fixes for Intel systems (Haswell and Ivy Bridge)" * tag 'edac/v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: sb_edac: correctly fetch DIMM width on Ivy Bridge and Haswell sb_edac: look harder for DDRIO on Haswell systems
2015-09-08sb_edac: correctly fetch DIMM width on Ivy Bridge and HaswellAristeu Rozanski
dimm_dev_type has been incorrectly determined in sb_edac. This patch fixes it for Ivy Bridge and Haswell only since nothing like exists for Sandy Bridge. We tested this patch in multiple systems matching the results with the installed memory modules. Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
generated by cgit v1.2.3 (git 2.51.0) at 2026-10-18 02:19:39 +0000