| Age | Commit message (Collapse) | Author |
|---|
|
Contrary to how it is implemented right now, this mux is controllable via
a bit in CRU_MUSC_CON (same bit as on rk3128 even) and allows switching
between xin24m and the 480m output of the usb2phy.
So drop the hard-coded fixed-factor clock and implement the correct mux
instead.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250503202532.992033-3-heiko@sntech.de
|
|
Add XSPI clock and reset entries.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250424081400.135028-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The mux smux2_xspi_clk{0,1} used for selecting spi and spix2 clocks and
pllcm33_xspi divider to select different clock rates. Add support for
both.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250424081400.135028-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
These clocks locate in VO and VPU GRF, serving for SD/SDIO controller
tuning purpose. Add their definitions and register them in driver if
corresponding GRF is available.
GRFs are looked up by compatible to simplify devicetree binding.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250506092206.46143-4-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Registers of MMC drive/sample clocks in Rockchip RV1106 and RK3528
locate in GRF regions. Adjust MMC clock code to support register
operations through regmap.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250506092206.46143-3-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The T-Head TH1520 SoC integrates a variety of clocks for its subsystems,
including the Application Processor (AP) and the Video Output (VO) [1].
Up until now, the T-Head clock driver only supported AP clocks.
Extend the driver to provide clock functionality for the VO subsystem.
At this stage, the focus is on implementing the VO clock gates, as these
are currently the most relevant and required components for enabling and
disabling the VO subsystem functionality. Future enhancements may
introduce additional VO-related clocks as necessary.
Link: https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf [1]
Reviewed-by: Drew Fustini <drew@pdp7.com>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Drew Fustini <drew@pdp7.com>
|
|
Add clock driver and clock definition for SG2044 SoC.
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/20250418020325.421257-6-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add PLL clock driver and clock definition for SG2044 SoC.
Link: https://lore.kernel.org/r/20250418020325.421257-5-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add of device id definition for newly added precise compatible.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250504104553.1447819-3-inochiama@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Simplify of_davinci_pll_init() by using of_get_available_child_by_name().
While at it, move of_node_put(child) inside the if block to avoid
additional check if of_child is NULL.
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250410062040.6346-1-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
devm_kasprintf() returns NULL when memory allocation fails. Currently,
raspberrypi_clk_register() does not check for this case, which results
in a NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: 93d2725affd6 ("clk: bcm: rpi: Discover the firmware clocks")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20250402020513.42628-1-bsdhenrymartin@gmail.com
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Since commit fbac2e7787ac ("clk: bcm: rpi: Allow the driver to
be probed by DT") the module alias isn't necessary anymore. So
we can drop it.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250415185614.16292-1-wahrenst@gmx.net
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
scaled_div_build() was added in 2014 by
commit 1f27f15258bf ("clk: bcm281xx: add initial clock framework support")
but hasn't been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250505013545.359745-1-linux@treblig.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.
Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used, with the exception of
gpu_cx_gdsc which has an explicit value (qcom,clk-dis-wait-val = <8>).
Fixes: 013804a727a0 ("clk: qcom: Add GPU clock controller driver for SM6350")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-4-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.
Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used.
Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-3-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.
Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used.
Fixes: 837519775f1d ("clk: qcom: Add display clock controller driver for SM6350")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-2-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.
Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used.
Fixes: 80f5451d9a7c ("clk: qcom: Add camera clock controller driver for SM6350")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-1-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Rockchip RK3576 gates the SAI MCLKOUT clocks behind some IOC GRF
writes.
Add these clock branches, and add the IOC GRF to the auxiliary GRF
hashtable.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250502-rk3576-sai-v3-4-376cef19dd7c@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Some rockchip SoCs, namely the RK3576, have bits in a General Register
File (GRF) that act just like clock gates. The downstream vendor kernel
simply maps over the already mapped GRF range with a generic clock gate
driver. This solution isn't suitable for upstream, as a memory range
will be in use by multiple drivers at the same time, and it leaks
implementation details into the device tree.
Instead, implement this with a new clock branch type in the Rockchip
clock driver: GRF gates. Somewhat akin to MUXGRF, this clock branch
depends on the type of GRF, but functions like a gate instead.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250502-rk3576-sai-v3-3-376cef19dd7c@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The MUXGRF clock branch type depends on having access to some sort of
GRF as a regmap to be registered. So far, we could easily get away with
only ever having one GRF stowed away in the context.
However, newer Rockchip SoCs, such as the RK3576, have several GRFs
which are relevant for clock purposes. It already depends on the pmu0
GRF for MUXGRF reasons, but could get away with not refactoring this
because it didn't need the sysgrf at all, so could overwrite the pointer
in the clock provider to the pmu0 grf regmap handle.
In preparation for needing to finally access more than one GRF per SoC,
let's untangle this. Introduce an auxiliary GRF hashmap, and a GRF type
enum. The hashmap is keyed by the enum, and clock branches now have a
struct member to store the value of that enum, which defaults to the
system GRF.
The SoC-specific _clk_init function can then insert pointers to GRF
regmaps into the hashmap based on the grf type.
During clock branch registration, we then pick the right GRF for each
branch from the hashmap if something other than the sys GRF is
requested.
The reason for doing it with this grf type indirection in the clock
branches is so that we don't need to define the MUXGRF branches in a
separate step, just to have a direct pointer to a regmap available
already.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250502-rk3576-sai-v3-2-376cef19dd7c@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Use the str_on_off() helper instead of open-coding the same operation.
Note that this does change the case of the flags, which doesn't matter
much for debug messages.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/622f8554dcb815c8fc73511a1a118c1724570fa9.1745840497.git.geert+renesas@glider.be
|
|
When introducing the SUNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT macro, the order
of the last two arguments was different between the users and the
definition: features became flags and flags became features.
This just didn't end up in a disaster yet because most users ended up
passing 0 for both arguments, and other clocks (for the new A523 SoC) are
not yet used.
Swap the order of the arguments in the definition, so that users stay
untouched.
Fixes: cdbb9d0d09db ("clk: sunxi-ng: mp: provide wrappers for setting feature flags")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250430095325.477311-1-andre.przywara@arm.com
[wens@csie.org: fix typo in commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The CLKS_NR_CPUCL0 macro was incorrectly defined based on a wrong clock ID.
It mistakenly referenced CLK_DOUT_CLUSTER0_PERIPHCLK, which corresponds to
a cluster peripheral clock, not the last clock ID for CPUCL0 as intended.
This patch corrects the definition to use CLK_DOUT_CPUCL0_NOCP + 1,
properly matching the last clock ID for CPUCL0 as intended.
This error was due to confusion with the hardware diagram, and this patch
ensures that the number of clocks for CPUCL0 is correctly defined.
Signed-off-by: Shin Son <shin.son@samsung.com>
Link: https://lore.kernel.org/r/20250428113517.426987-4-shin.son@samsung.com
Fixes: 59636ec89c2c ("clk: samsung: exynosautov920: add cpucl0 clock support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Register compatible and cmu_info data to support clock CPUCL1/2
(CPU Cluster 1 and CPU Cluster 2),
these provide clock for CPUCL1/2_SWTICH/CLUSTER.
These clocks are required early during boot for the CPUs,
so they are declared using CLK_OF_DECLARE instead of being registered
through a platform driver.
Signed-off-by: Shin Son <shin.son@samsung.com>
Link: https://lore.kernel.org/r/20250428113517.426987-3-shin.son@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Register compatible and cmu_info data to support clock CPUCL0(CPU
Cluster 0), this provides clock for CPUCL0_SWTICH/DBG/CLUSTER. These
clocks are required early during boot for the CPUs, so they are declared
using CLK_OF_DECLARE instead of being registered through a platform
driver.
Signed-off-by: Shin Son <shin.son@samsung.com>
Link: https://lore.kernel.org/r/20250423044153.1288077-3-shin.son@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Enabling the compile test should not cause automatic enabling of all
drivers. Restrict the default to ARCH also for individual drivers, even
though their choice is not visible without selecting parent Kconfig
symbol, because otherwise selecting parent would select the child during
compile testing.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250404-kconfig-defaults-clk-v1-5-4d2df5603332@linaro.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Enabling the compile test should not cause automatic enabling of all
drivers. Restrict the default to ARCH also for individual drivers, even
though their choice is not visible without selecting parent Kconfig
symbol, because otherwise selecting parent would select the child during
compile testing.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250404-kconfig-defaults-clk-v1-4-4d2df5603332@linaro.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add PLL rate for 33.3 MHz to allow BTT HDMI5 screen to run at its native
mode of 800x480
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://lore.kernel.org/r/20250318181930.1178256-1-anarsoul@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The phy clock of the OTP block is also present, but was not defined
so far. Though its clk-id already existed, so just define its location.
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250210224510.1194963-2-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Since readl() returns a u32, the local variable reg can also have the
data type u32. Furthermore, mdiv and refdiv are derived from reg and can
also be a u32.
Since do_div() casts the divisor to u32 anyway, changing the data type
of refdiv to u32 removes the following Coccinelle/coccicheck warning
reported by do_div.cocci:
WARNING: do_div() does a 64-by-32 division, please consider using div64_ul instead
Compile-tested only.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Since readl() returns a u32, the local variables reg and bypass can also
have the data type u32. Furthermore, divf and divq are derived from reg
and can also be a u32.
Since do_div() casts the divisor to u32 anyway, changing the data type
of divq to u32 removes the following Coccinelle/coccicheck warning
reported by do_div.cocci:
WARNING: do_div() does a 64-by-32 division, please consider using div64_ul instead
Compile-tested only.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add clock and reset entries for USB2.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407165202.197570-9-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Update the clock enable/disable logic to follow the latest hardware
manual's guidelines, ensuring that both CLK_ON and CLK_MON bits are used
to confirm the clock state.
According to the manual, enabling a clock requires setting the
CPG_CLK_ON bit and verifying the clock has started using the CPG_CLK_MON
bit. Similarly, disabling a clock requires clearing the CPG_CLK_ON bit
and confirming the clock has stopped via the CPG_CLK_MON bit.
Modify `rzv2h_mod_clock_is_enabled()` to check CLK_MON first and then
validate CLK_ON for a more accurate clock status evaluation.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407165202.197570-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Replace hard-coded "ON"/"OFF" strings with the `str_on_off()` helper in
`rzv2h_mod_clock_endisable()`.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407165202.197570-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add support for static dividers that do not require read-modify-write
(RMW) operations. This enables the use of the generic clk_divider_ops
instead of the custom RMW-based implementation.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Co-developed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407165202.197570-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Unlike dynamic dividers, static dividers do not have a monitor bit.
Introduce the `DEF_CSDIV()` macro for defining static dividers, ensuring
consistency with existing dynamic divider macros.
Additionally, introduce the `CSDIV_NO_MON` macro to indicate the absence
of a monitor bit, allowing the monitoring step to be skipped when `mon`
is set to `CSDIV_NO_MON`.
Note, `rzv2h_cpg_ddiv_clk_register()` will be re-used instead of generic
`clk_hw_register_divider_table()` for registering satic dividers as some
of the static dividers require RMW operations.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407165202.197570-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add support for `CLK_TYPE_SMUX` to register static muxed clocks on the
Renesas RZ/V2H(P) SoC. Extend `cpg_core_clk` to include parent names,
mux flags, and a new `smuxed` struct. Update clock registration to
handle static mux clocks.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407165202.197570-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add CLK_PLLVDO_GPU along with the necessary clock and reset entries for
GE3D.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250402131142.1270701-2-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Fix a typo montor->monitor in kernel-doc comment.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250320093107.36784-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The control register for TWSI8 clocks, APBC_TWSI8_CLK_RST, contains mux
selection bits, reset assertion bit and enable bits for function and bus
clocks. It has a quirk that reading always results in zero.
As a workaround, let's hardcode the mux value as zero to select
pll1_d78_31p5 as parent and treat twsi8_clk as a gate, whose enable mask
is combined from the real bus and function clocks to avoid the
write-only register being shared between two clk_hws, in which case
updates of one clk_hw zero the other's bits.
With a 1:1 factor serving as placeholder for the bus clock, the I2C-8
controller could be brought up, which is essential for boards attaching
power-management chips to it.
Signed-off-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250416135406.16284-5-heylenay@4d2.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
The clock tree of K1 SoC contains three main types of clock hardware
(PLL/DDN/MIX) and has control registers split into several multifunction
devices: APBS (PLLs), MPMU, APBC and APMU.
All register operations are done through regmap to ensure atomicity
between concurrent operations of clock driver and reset,
power-domain driver that will be introduced in the future.
Signed-off-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250416135406.16284-4-heylenay@4d2.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Use samsung CCF function which registers multiple clock providers using
single function call samsung_cmu_register_clocks().
Signed-off-by: Varada Pavani <v.pavani@samsung.com>
Link: https://lore.kernel.org/r/20250307092403.19742-1-v.pavani@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
In the current implementation, the return value of dev_pm_domain_attach()
is not checked. This can lead to silent failures if the function fails,
as the code would continue execution and return 0, ignoring the error.
This patch adds a check for the return value of dev_pm_domain_attach().
If the function fails, an error message is logged using dev_err_probe(),
and the error is propagated to the existing error handling path `err`,
which ensures proper cleanup by calling clk_notifier_unregister().
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250211092017.562-1-vulab@iscas.ac.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The clock structure for RZ/V2N is almost identical to RZ/V2H(P) SoC
with less IP blocks compared to RZ/V2H(P). For eg: CRU2/3 are present
only on the RZ/V2H(P) SoC.
Add minimal clock and reset entries required to boot the Renesas
RZ/V2N EVK and binds it with the RZ/V2H CPG family driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-9-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Reorder the compatible entries in `rzv2h_cpg_match[]` to follow a
numerical sequence based on the SoC part numbers.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
rzv2h_cpg_assert() and rzv2h_cpg_deassert() functions are similar. Share
this code via __rzv2h_cpg_assert(). This avoid code duplication.
Reported-by: Pavel Machek <pavel@denx.de>
Closes: https://lore.kernel.org/cip-dev/Z9QA9rwuXCuVbOXp@duo.ucw.cz/
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250317083213.371614-4-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Remove duplicate code into rzv2h_ddiv_set_rate().
Reported-by: Pavel Machek <pavel@denx.de>
Closes: https://lore.kernel.org/cip-dev/Z9QBZo4GgtMjid0v@duo.ucw.cz/
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250317083213.371614-3-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Unlike PLLs in previous geneation of SoCs, PLLs in RK3588 type don't
require any platform-specific initialization. Drop callback
rockchip_rk3588_pll_init() that does nothing in fact to clean the
driver up.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Link: https://lore.kernel.org/r/20250326113556.21039-1-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
At least one RK3588 clock (CPLL) uses 1.5 GHz, so let's add
that frequency to the PLL table.
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Link: https://lore.kernel.org/r/20250408064612.41359-1-eagle.alexander923@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add PLLGPU along with the necessary clock and reset entries for GE3D.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250309211402.80886-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
