| Age | Commit message (Collapse) | Author |
|---|
|
The for_each_obj_request*() macros should parenthesize their uses of
the ireq parameter.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
With current persistent grants implementation we are not freeing the
persistent grants after we disconnect the device. Since grant map
operations change the mfn of the allocated page, and we can no longer
pass it to __free_page without setting the mfn to a sane value, use
balloon grant pages instead, as the gntdev device does.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: stable@vger.kernel.org
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Replace llist_for_each_entry_safe with a while loop.
llist_for_each_entry_safe can trigger a bug in GCC 4.1, so it's best
to remove it and use a while loop and do the deletion manually.
Specifically this bug can be triggered by hot-unplugging a disk, either
by doing xm block-detach or by save/restore cycle.
BUG: unable to handle kernel paging request at fffffffffffffff0
IP: [<ffffffffa0047223>] blkif_free+0x63/0x130 [xen_blkfront]
The crash call trace is:
...
bad_area_nosemaphore+0x13/0x20
do_page_fault+0x25e/0x4b0
page_fault+0x25/0x30
? blkif_free+0x63/0x130 [xen_blkfront]
blkfront_resume+0x46/0xa0 [xen_blkfront]
xenbus_dev_resume+0x6c/0x140
pm_op+0x192/0x1b0
device_resume+0x82/0x1e0
dpm_resume+0xc9/0x1a0
dpm_resume_end+0x15/0x30
do_suspend+0x117/0x1e0
When drilling down to the assembler code, on newer GCC it does
.L29:
cmpq $-16, %r12 #, persistent_gnt check
je .L30 #, out of the loop
.L25:
... code in the loop
testq %r13, %r13 # n
je .L29 #, back to the top of the loop
cmpq $-16, %r12 #, persistent_gnt check
movq 16(%r12), %r13 # <variable>.node.next, n
jne .L25 #, back to the top of the loop
.L30:
While on GCC 4.1, it is:
L78:
... code in the loop
testq %r13, %r13 # n
je .L78 #, back to the top of the loop
movq 16(%rbx), %r13 # <variable>.node.next, n
jmp .L78 #, back to the top of the loop
Which basically means that the exit loop condition instead of
being:
&(pos)->member != NULL;
is:
;
which makes the loop unbound.
Since xen-blkfront is the only user of the llist_for_each_entry_safe
macro remove it from llist.h.
Orabug: 16263164
CC: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
The 'handle' is the device that the request is from. For the life-time
of the ring we copy it from a request to a response so that the frontend
is not surprised by it. But we do not need it - when we start processing
I/Os we have our own 'struct phys_req' which has only most essential
information about the request. In fact the 'vbd_translate' ends up
over-writing the preq.dev with a value from the backend.
This assignment of preq.dev with the 'handle' value is superfluous
so lets not do it.
Cc: stable@vger.kernel.org
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
"be->mode" is obtained from xenbus_read(), which does a kmalloc() for
the message body. The short string is never released, so do it along
with freeing "be" itself, and make sure the string isn't kept when
backend_changed() doesn't complete successfully (which made it
desirable to slightly re-structure that function, so that the error
cleanup can be done in one place).
Reported-by: Olaf Hering <olaf@aepfle.de>
CC: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
This patch includes the following driver fixes for the
IBM RamSan 70/80 driver:
o Changed the creg_ctrl lock from a mutex to a spinlock.
o Added a count check for ioctl calls.
o Removed unnecessary casting of void pointers.
o Made every function static that needed to be.
o Added comments to explain things more thoroughly.
Signed-off-by: Philip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is only one caller of ceph_osdc_create_event(), and it
provides 0 as its "one_shot" argument. Get rid of that argument and
just use 0 in its place.
Replace the code in handle_watch_notify() that executes if one_shot
is nonzero in the event with a BUG_ON() call.
While modifying "osd_client.c", give handle_watch_notify() static
scope.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Pull sparc fixes from David Miller:
"A couple small fixes for sparc including some THP brown-paper-bag
material:
1) During the merging of all the THP support for various
architectures, sparc missed adding a
HAVE_ARCH_TRANSPARENT_HUGEPAGE to it's Kconfig, oops.
2) Sparc needs to be mindful of hugepages in get_user_pages_fast().
3) Fix memory leak in SBUS probe, from Cong Ding.
4) The sunvdc virtual disk client driver has a test of the bitmask of
vdisk server supported operations which was off by one bit"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sunvdc: Fix off-by-one in generic_request().
sparc64: Fix get_user_pages_fast() wrt. THP.
sparc64: Add missing HAVE_ARCH_TRANSPARENT_HUGEPAGE.
sparc: kernel/sbus.c: fix memory leakage
|
|
The 'operations' bitmap corresponds one-for-one with the operation
codes, no adjustment is necessary.
Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux into for-3.9/drivers
Paul writes:
Please pull the following to get the removal of the original IBM PC-XT
hard disk driver from the block layer (drivers/block/xd.c).
As near as I can tell, it hasn't seen a run time fix in over a dozen
years, and with drive sizes of 10-20MB, and performance of about 128kB/s
maximum, it is no surprise that it has been completely unused for well
over a decade.
The removal was originally posted[1] well over a month ago, and since
then, there has been nobody objecting to the removal, aside from someone
who had mistakenly confused it with a completely different driver (hd.c)
|
|
Somehow, I missed this little item in Documentation/atomic_ops.txt:
*** WARNING: atomic_read() and atomic_set() DO NOT IMPLY BARRIERS! ***
Create and use some helper functions that include the proper memory
barriers for manipulating the done field.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
This commit:
bc7a62ee5 rbd: prevent open for image being removed
added checking for removing rbd before allowing an open, and used
the same request spinlock for protecting that and updating the open
count as is used for the request queue.
However it used the non-irq protected version of the spinlocks.
Fix that.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
There is a check in the completion path for osd requests that
ensures the number of pages allocated is enough to hold the amount
of incoming data expected.
For bio requests coming from rbd the "number of pages" is not really
meaningful (although total length would be). So stop requiring that
nr_pages be supplied for bio requests. This is done by checking
whether the pages pointer is null before checking the value of
nr_pages.
Note that this value is passed on to the messenger, but there it's
only used for debugging--it's never used for validation.
While here, change another spot that used r_pages in a debug message
inappropriately, and also invalidate the r_con_filling_msg pointer
after dropping a reference to it.
This resolves:
http://tracker.ceph.com/issues/3875
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Currently, if the OSD client finds an osd request has had a bio list
attached to it, it drops a reference to it (or rather, to the first
entry on that list) when the request is released.
The code that added that reference (i.e., the rbd client) is
therefore required to take an extra reference to that first bio
structure.
The osd client doesn't really do anything with the bio pointer other
than transfer it from the osd request structure to outgoing (for
writes) and ingoing (for reads) messages. So it really isn't the
right place to be taking or dropping references.
Furthermore, the rbd client already holds references to all bio
structures it passes to the osd client, and holds them until the
request is completed. So there's no need for this extra reference
whatsoever.
So remove the bio_put() call in ceph_osdc_release_request(), as
well as its matching bio_get() call in rbd_osd_req_create().
This change could lead to a crash if old libceph.ko was used with
new rbd.ko. Add a compatibility check at rbd initialization time to
avoid this possibilty.
This resolves:
http://tracker.ceph.com/issues/3798 and
http://tracker.ceph.com/issues/3799
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
An open request for a mapped rbd image can arrive while removal of
that mapping is underway. We need to prevent such an open request
from succeeding. (It appears that Maciej Galkiewicz ran into this
problem.)
Define and use a "removing" flag to indicate a mapping is getting
removed. Set it in the remove path after verifying nothing holds
the device open. And check it in the open path before allowing the
open to proceed. Acquire the rbd device's lock around each of these
spots to avoid any races accessing the flags and open_count fields.
This addresses:
http://tracker.newdream.net/issues/3427
Reported-by: Maciej Galkiewicz <maciejgalkiewicz@ragnarson.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Define a new rbd device flags field, manipulated using bit
operations. Replace the use of the current "exists" flag with a bit
in this new "flags" field. Add a little commentary about the
"exists" flag, which does not need to be manipulated atomically.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
When we register an osd request to linger, it means that request
will stay around (under control of the osd client) until we've
unregistered it. We do that for an rbd image's header object, and
we keep a pointer to the object request associated with it.
Keep a reference to the watch object request for as long as it is
registered to linger. Drop it again after we've removed the linger
registration.
This resolves:
http://tracker.ceph.com/issues/3937
(Note: this originally came about because the osd client was
issuing a callback more than once. But that behavior will be
changing soon, documented in tracker issue 3967.)
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Decrement the obj_request_count value when deleting an object
request from its image request's list. Rearrange a few lines
in the surrounding code.
This resolves:
http://tracker.ceph.com/issues/3940
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Switch to keeping track of the object request pointer rather than
the osd request used to watch the rbd image header object.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Move the code that unregisters an rbd device's lingering header
object watch request into rbd_dev_header_watch_sync(), so it
occurs in the same function that originally sets up that request.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Get rid rbd_req_sync_exec() because it is no longer used. That
eliminates the last use of rbd_req_sync_op(), so get rid of that
too. And finally, that leaves rbd_do_request() unreferenced, so get
rid of that.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Reimplement synchronous object method calls using the new request
tracking code. Use the name rbd_obj_method_sync()
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
When we receive notification of a change to an rbd image's header
object we need to refresh our information about the image (its
size and snapshot context). Once we have refreshed our rbd image
we need to acknowledge the notification.
This acknowledgement was previously done synchronously, but there's
really no need to wait for it to complete.
Change it so the caller doesn't wait for the notify acknowledgement
request to complete. And change the name to reflect it's no longer
synchronous.
This resolves:
http://tracker.newdream.net/issues/3877
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Get rid rbd_req_sync_notify_ack() because it is no longer used.
As a result rbd_simple_req_cb() becomes unreferenced, so get rid
of that too.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Use the new object request tracking mechanism for handling a
notify_ack request.
Move the callback function below the definition of this so we don't
have to do a pre-declaration.
This resolves:
http://tracker.newdream.net/issues/3754
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Get rid of rbd_req_sync_watch(), because it is no longer used.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Implement a new function to set up or tear down a watch event
for an mapped rbd image header using the new request code.
Create a new object request type "nodata" to handle this. And
define rbd_osd_trivial_callback() which simply marks a request done.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Delete rbd_req_sync_read() is no longer used, so get rid of it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Reimplement the synchronous read operation used for reading a
version 1 header using the new request tracking code. Name the
resulting function rbd_obj_read_sync() to better reflect that
it's a full object operation, not an object request. To do this,
implement a new OBJ_REQUEST_PAGES object request type.
This implements a new mechanism to allow the caller to wait for
completion for an rbd_obj_request by calling rbd_obj_request_wait().
This partially resolves:
http://tracker.newdream.net/issues/3755
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
The two remaining callers of rbd_do_request() always pass a null
collection pointer, so the "coll" and "coll_index" parameters are
not needed. There is no other use of that data structure, so it
can be eliminated.
Deleting them means there is no need to allocate a rbd_request
structure for the callback function. And since that's the only use
of *that* structure, it too can be eliminated.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Now that the request function has been replaced by one using the new
request management data structures the old one can go away.
Deleting it makes rbd_dev_do_request() no longer needed, and
deleting that makes other functions unneeded, and so on.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
This patch fully implements the new request tracking code for rbd
I/O requests.
Each I/O request to an rbd image will get an rbd_image_request
structure allocated to track it. This provides access to all
information about the original request, as well as access to the
set of one or more object requests that are initiated as a result
of the image request.
An rbd_obj_request structure defines a request sent to a single osd
object (possibly) as part of an rbd image request. An rbd object
request refers to a ceph_osd_request structure built up to represent
the request; for now it will contain a single osd operation. It
also provides space to hold the result status and the version of the
object when the osd request completes.
An rbd_obj_request structure can also stand on its own. This will
be used for reading the version 1 header object, for issuing
acknowledgements to event notifications, and for making object
method calls.
All rbd object requests now complete asynchronously with respect
to the osd client--they supply a common callback routine.
This resolves:
http://tracker.newdream.net/issues/3741
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
It doesn't seem this spinlock was properly initialized.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
kbuild test robot says:
tree: git://git.kernel.dk/linux-block.git for-3.9/drivers
head: 1262e24a59a052f9a98383e47e7c903712490d5c
commit: 8722ff8cdbfac9c1b20e67bb067b455c48cb8e93 [6/8] block: IBM RamSan 70/80 device driver
config: make ARCH=alpha allyesconfig
All error/warnings:
drivers/block/rsxx/dma.c: In function 'rsxx_complete_dma':
>> drivers/block/rsxx/dma.c:251:2: error: implicit declaration of function 'kmem_cache_free' [-Werror=implicit-function-declaration]
drivers/block/rsxx/dma.c: In function 'rsxx_queue_discard':
>> drivers/block/rsxx/dma.c:567:2: error: implicit declaration of function 'kmem_cache_alloc' [-Werror=implicit-function-declaration]
>> drivers/block/rsxx/dma.c:567:6: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/block/rsxx/dma.c: In function 'rsxx_queue_dma':
>> drivers/block/rsxx/dma.c:601:6: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/block/rsxx/dma.c: In function 'rsxx_dma_init':
>> drivers/block/rsxx/dma.c:985:2: error: implicit declaration of function 'KMEM_CACHE' [-Werror=implicit-function-declaration]
>> drivers/block/rsxx/dma.c:985:29: error: 'rsxx_dma' undeclared (first use in this function)
drivers/block/rsxx/dma.c:985:29: note: each undeclared identifier is reported only once for each function it appears in
>> drivers/block/rsxx/dma.c:985:39: error: 'SLAB_HWCACHE_ALIGN' undeclared (first use in this function)
drivers/block/rsxx/dma.c: In function 'rsxx_dma_cleanup':
>> drivers/block/rsxx/dma.c:995:2: error: implicit declaration of function 'kmem_cache_destroy' [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The MTIP32XX driver calls devm_request_irq() and therefore needs a
GENERIC_HARDIRQS dependency to prevent building it on s390.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block layer updates from Jens Axboe:
"I've got a few bits pending for 3.8 final, that I better get sent out.
It's all been sitting for a while, I consider it safe.
It contains:
- Two bug fixes for mtip32xx, fixing a driver hang and a crash.
- A few-liner protocol error fix for drbd.
- A few fixes for the xen block front/back driver, fixing a potential
data corruption issue.
- A race fix for disk_clear_events(), causing spurious warnings. Out
of the Chrome OS base.
- A deadlock fix for disk_clear_events(), moving it to the a
unfreezable workqueue. Also from the Chrome OS base."
* 'for-linus' of git://git.kernel.dk/linux-block:
drbd: fix potential protocol error and resulting disconnect/reconnect
mtip32xx: fix for crash when the device surprise removed during rebuild
mtip32xx: fix for driver hang after a command timeout
block: prevent race/cleanup
block: remove deadlock in disk_clear_events
xen-blkfront: handle bvecs with partial data
llist/xen-blkfront: implement safe version of llist_for_each_entry
xen-blkback: implement safe iterator for the list of persistent grants
|
|
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch includes the device driver for the IBM RamSan
family of PCI SSD flash storage cards. This driver will
include support for the RamSan 70 and 80. The driver
presents a block device for device I/O.
Signed-off-by: Philip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
|
|
This resolves a gpio driver merge issue pointed out in linux-next.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When an rbd image is initially mapped a watch event is registered so
we can do something if the header object changes.
The code that does this currently loops if initiating the watch
request results in an ERANGE error. The osds will never return
ERANGE, so there's no reason to do this loop, so get rid of it.
This resolves:
http://tracker.newdream.net/issues/3860
Note that the problem this loop was intended to solve is a race
between collecting image header information and setting up the watch
on the header object. The real fix for that problem is described
here:
http://tracker.newdream.net/issues/3871
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
The return type of rbd_get_num_segments() is int, but the values it
operates on are u64. Although it's not likely, there's no guarantee
the result won't exceed what can be respresented in an int. The
function is already designed to return -ERANGE on error, so just add
this possible overflow as another reason to return that.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
A few very minor changes to the rbd code:
- RBD_MAX_OPT_LEN is unused, so get rid of it
- Consolidate rbd options definitions
- Make rbd_segment_name() return pointer to const char
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
|
|
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Tim Waugh <tim@cyberelk.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When we notice a disk failure on the receiving side,
we stop sending it new incoming writes.
Depending on exact timing of various events, the same transfer log epoch
could end up containing both replicated (before we noticed the failure)
and local-only requests (after we noticed the failure).
The sanity checks in tl_release(), called when receiving a
P_BARRIER_ACK, check that the ack'ed transfer log epoch matches
the expected epoch, and the number of contained writes matches
the number of ack'ed writes.
In this case, they counted both replicated and local-only writes,
but the peer only acknowledges those it has seen. We get a mismatch,
resulting in a protocol error and disconnect/reconnect cycle.
Messages logged are
"BAD! BarrierAck #%u received with n_writes=%u, expected n_writes=%u!\n"
A similar issue can also be triggered when starting a resync while
having a healthy replication link, by invalidating one side, forcing a
full sync, or attaching to a diskless node.
Fix this by closing the current epoch if the state changes in a way
that would cause the replication intent of the next write.
Epochs now contain either only non-replicated,
or only replicated writes.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module fixes and a virtio block fix from Rusty Russell:
"Various minor fixes, but a slightly more complex one to fix the
per-cpu overload problem introduced recently by kvm id changes."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
module: put modules in list much earlier.
module: add new state MODULE_STATE_UNFORMED.
module: prevent warning when finit_module a 0 sized file
virtio-blk: Don't free ida when disk is in use
|
|
The type of the snap_id local variable is defined with the
wrong byte order. Fix that.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
Both rbd_req_sync_op() and rbd_do_request() have a "linger"
parameter, which is the address of a pointer that should refer to
the osd request structure used to issue a request to an osd.
Only one case ever supplies a non-null "linger" argument: an
CEPH_OSD_OP_WATCH start. And in that one case it is assigned
&rbd_dev->watch_request.
Within rbd_do_request() (where the assignment ultimately gets made)
we know the rbd_dev and therefore its watch_request field. We
also know whether the op being sent is CEPH_OSD_OP_WATCH start.
Stop opaquely passing down the "linger" pointer, and instead just
assign the value directly inside rbd_do_request() when it's needed.
This makes it unnecessary for rbd_req_sync_watch() to make
arrangements to hold a value that's not available until a
bit later. This more clearly separates setting up a watch
request from submitting it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
|
The two remaining osd ops used by rbd are CEPH_OSD_OP_WATCH and
CEPH_OSD_OP_NOTIFY_ACK. Move the setup of those operations into
rbd_osd_req_op_create(), and get rid of rbd_create_rw_op() and
rbd_destroy_op().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
|
