| Age | Commit message (Collapse) | Author |
|---|
|
Now that gcc-8 and binutils-2.30 are the minimum versions, a lot of
the individual feature checks can go away for simplification.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Commit a3e8fe814ad1 ("x86/build: Raise the minimum GCC version to 8.1")
raised the minimum compiler version as enforced by Kbuild to gcc-8.1
and clang-15 for x86.
This is actually the same gcc version that has been discussed as the
minimum for all architectures several times in the past, with little
objection. A previous concern was the kernel for SLE15-SP7 needing to
be built with gcc-7. As this ended up still using linux-6.4 and there
is no plan for an SP8, this is no longer a problem.
Change it for all architectures and adjust the documentation accordingly.
A few version checks can be removed in the process. The binutils
version 2.30 is the lowest version used in combination with gcc-8 on
common distros, so use that as the corresponding minimum.
Link: https://lore.kernel.org/lkml/20240925150059.3955569-32-ardb+git@google.com/
Link: https://lore.kernel.org/lkml/871q7yxrgv.wl-tiwai@suse.de/
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fix MAX_REG_OFFSET to point to the last register in 'pt_regs' and not to
the marker itself, which could allow regs_get_register() to return an
invalid offset.
Fixes: 40e084a506eb ("MIPS: Add uprobes support.")
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Historically fpsimd_to_sve() and sve_to_fpsimd() were (conditionally)
called by functions which were defined regardless of CONFIG_ARM64_SVE.
Hence it was necessary that both fpsimd_to_sve() and sve_to_fpsimd()
were always defined and not guarded by ifdeffery.
As a result of the removal of fpsimd_signal_preserve_current_state() in
commit:
929fa99b1215966f ("arm64/fpsimd: signal: Always save+flush state early")
... sve_to_fpsimd() has no callers when CONFIG_ARM64_SVE=n, resulting in
a build-time warnign that it is unused:
| arch/arm64/kernel/fpsimd.c:676:13: warning: unused function 'sve_to_fpsimd' [-Wunused-function]
| 676 | static void sve_to_fpsimd(struct task_struct *task)
| | ^~~~~~~~~~~~~
| 1 warning generated.
In contrast, fpsimd_to_sve() still has callers which are defined when
CONFIG_ARM64_SVE=n, and it would be awkward to hide this behind
ifdeffery and/or to use stub functions.
For now, suppress the warning by marking both fpsimd_to_sve() and
sve_to_fpsimd() as 'static inline', as we usually do for stub functions.
The compiler will no longer warn if either function is unused.
Aside from suppressing the warning, there should be no functional change
as a result of this patch.
Link: https://lore.kernel.org/linux-arm-kernel/20250429194600.GA26883@willie-the-truck/
Reported-by: Will Deacon <will@kernel.org>
Fixes: 929fa99b1215 ("arm64/fpsimd: signal: Always save+flush state early")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250430173240.4023627-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
strcpy() is deprecated due to issues with bounds checking and overflows.
Replace it with strscpy().
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250429230710.54014-1-rubenru09@aol.com
|
|
After
6f059e634dcd("x86/microcode: Clarify the late load logic"),
if the load is up-to-date, the AMD side returns UCODE_OK which leads to
load_late_locked() returning -EBADFD.
Handle UCODE_OK in the switch case to avoid this error.
[ bp: Massage commit message. ]
Fixes: 6f059e634dcd ("x86/microcode: Clarify the late load logic")
Signed-off-by: Annie Li <jiayanli@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250430053424.77438-1-jiayanli@google.com
|
|
When generating the MSR_IA32_PEBS_ENABLE value that will be loaded on
VM-Entry to a KVM guest, mask the value with the vCPU's desired PEBS_ENABLE
value. Consulting only the host kernel's host vs. guest masks results in
running the guest with PEBS enabled even when the guest doesn't want to use
PEBS. Because KVM uses perf events to proxy the guest virtual PMU, simply
looking at exclude_host can't differentiate between events created by host
userspace, and events created by KVM on behalf of the guest.
Running the guest with PEBS unexpectedly enabled typically manifests as
crashes due to a near-infinite stream of #PFs. E.g. if the guest hasn't
written MSR_IA32_DS_AREA, the CPU will hit page faults on address '0' when
trying to record PEBS events.
The issue is most easily reproduced by running `perf kvm top` from before
commit 7b100989b4f6 ("perf evlist: Remove __evlist__add_default") (after
which, `perf kvm top` effectively stopped using PEBS). The userspace side
of perf creates a guest-only PEBS event, which intel_guest_get_msrs()
misconstrues a guest-*owned* PEBS event.
Arguably, this is a userspace bug, as enabling PEBS on guest-only events
simply cannot work, and userspace can kill VMs in many other ways (there
is no danger to the host). However, even if this is considered to be bad
userspace behavior, there's zero downside to perf/KVM restricting PEBS to
guest-owned events.
Note, commit 854250329c02 ("KVM: x86/pmu: Disable guest PEBS temporarily
in two rare situations") fixed the case where host userspace is profiling
KVM *and* userspace, but missed the case where userspace is profiling only
KVM.
Fixes: c59a1f106f5c ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
Closes: https://lore.kernel.org/all/Z_VUswFkWiTYI0eD@do-x1carbon
Reported-by: Seth Forshee <sforshee@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: "Seth Forshee (DigitalOcean)" <sforshee@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250426001355.1026530-1-seanjc@google.com
|
|
Remove the optimized strcpy() library implementation. This doesn't make any
difference since gcc recognizes all strcpy() usages anyway and uses the
builtin variant. There is not a single branch to strcpy() within the
generated kernel image, which also seems to be the reason why most other
architectures don't have a strcpy() implementation anymore.
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Convert all strcpy() usages to strscpy(). strcpy() is deprecated since
it performs no bounds checking on the destination buffer.
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Convert all strcpy() usages to strscpy() where the conversion means
just replacing strcpy() with strscpy(). strcpy() is deprecated since
it performs no bounds checking on the destination buffer.
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add a new parameter xflags to the in-kernel API function
pkey_key2protkey(). Currently there is only one flag supported:
* PKEY_XFLAG_NOMEMALLOC:
If this flag is given in the xflags parameter, the pkey
implementation is not allowed to allocate memory but instead should
fall back to use preallocated memory or simple fail with -ENOMEM.
This flag is for protected key derive within a cipher or similar
which must not allocate memory which would cause io operations - see
also the CRYPTO_ALG_ALLOCATES_MEMORY flag in crypto.h.
The one and only user of this in-kernel API - the skcipher
implementations PAES in paes_s390.c set this flag upon request
to derive a protected key from the given raw key material.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-26-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Provide and pass the xflag parameter from pkey ioctls through
the pkey handler and further down to the implementations
(CCA, EP11, PCKMO and UV). So all the code is now prepared
and ready to support xflags ("execution flag").
The pkey layer supports the xflag PKEY_XFLAG_NOMEMALLOC: If this
flag is given in the xflags parameter, the pkey implementation is
not allowed to allocate memory but instead should fall back to use
preallocated memory or simple fail with -ENOMEM. This flag is for
protected key derive within a cipher or similar which must not
allocate memory which would cause io operations - see also the
CRYPTO_ALG_ALLOCATES_MEMORY flag in crypto.h.
Within the pkey handlers this flag is then to be translated to
appropriate zcrypt xflags before any zcrypt related functions
are called. So the PKEY_XFLAG_NOMEMALLOC translates to
ZCRYPT_XFLAG_NOMEMALLOC - If this flag is set, no memory
allocations which may trigger any IO operations are done.
The pkey in-kernel pkey API still does not provide this xflag
param. That's intended to come with a separate patch which
enables this functionality.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-25-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The uv_get_secret_metadata() in-kernel function was only
offered and used by the pkey uv handler. Remove it as there
is no customer any more.
Suggested-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-24-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Rename the internal UV function find_secret() to uv_find_secret()
and publish it as new UV API in-kernel function.
The pkey uv handler may be called in a do-not-allocate memory
situation where sleeping is allowed but allocating memory which
may cause IO operations is not. For example when an encrypted
swap file is used and the encryption is done via UV retrievable
secrets with protected keys.
The UV API function uv_get_secret_metadata() allocates memory
and then calls the find_secret() function. By exposing the
find_secret() function as a new UV API function uv_find_secret()
it is possible to retrieve UV secret meta data without any
memory allocations from the UV when the caller offers space
for one struct uv_secret_list.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424133619.16495-22-freude@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
In CPUMF attribute definitions for z15 all CPUMF attributes
have configuration values of the form 0x0[0-9a-f]{3} .
However 2 defines do not match this scheme, they have two leading
zeroes instead of one. Adjust this. No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Restructure SRSO to use select/update/apply functions to create
consistent vulnerability handling. Like with retbleed, the command line
options directly select mitigations which can later be modified.
While at it, remove a comment which doesn't apply anymore due to the
changed mitigation detection flow.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-17-david.kaplan@amd.com
|
|
Add cmu_cpucl1/2(CPU Cluster 1 and CPU Cluster 2) clocks
for switch, cluster domains respectively.
Signed-off-by: Shin Son <shin.son@samsung.com>
Link: https://lore.kernel.org/r/20250428113517.426987-5-shin.son@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The "snps,data-width" property[1] defines the AXI data width of the DMA
controller as:
width = 8 × (2^n) bits
(0 = 8 bits, 1 = 16 bits, 2 = 32 bits, ..., 6 = 512 bits)
where "n" is the value of "snps,data-width".
For the CV18xx DMA controller, the correct AXI data width is 32 bits,
corresponding to "snps,data-width = 2".
Test results on Milkv Duo S can be found here [2].
Link: https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/dma/snps%2Cdw-axi-dmac.yaml#L74 [1]
Link: https://gist.github.com/Sutter099/4fa99bb2d89e5af975983124704b3861 [2]
Fixes: 514951a81a5e ("riscv: dts: sophgo: cv18xx: add DMA controller")
Co-developed-by: Yu Yuan <yu.yuan@sjtu.edu.cn>
Signed-off-by: Yu Yuan <yu.yuan@sjtu.edu.cn>
Signed-off-by: Ze Huang <huangze@whut.edu.cn>
Link: https://lore.kernel.org/r/20250428-duo-dma-config-v1-1-eb6ad836ca42@whut.edu.cn
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
The sha512 state size in s390_sha_ctx is out by a factor of 8,
fix it so that it stays below HASH_MAX_DESCSIZE. Also fix the
state init function which was writing garbage to the state. Luckily
this is not actually used for anything other than export.
Reported-by: Harald Freudenberger <freude@linux.ibm.com>
Fixes: 572b5c4682c7 ("crypto: s390/sha512 - Use API partial block handling")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The Rockchip RK3576 features two SATA nodes. The first, sata0, is behind
combphy0, which muxes between pcie0 and sata0.
The second, sata1, is behind combphy1, which muxes between pcie1, sata1
and usb_drd1_dwc3.
I've only been able to test sata0 on my board, but it appears to work
just fine.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250424-rk3576-sata-v1-2-23ee89c939fe@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Someone made a typo when they added the RTC to the Sige5 DTS, which
resulted in it using interrupts from GPIO0 B0 instead of GPIO0 A0. The
pinctrl entry for it wasn't typoed though, curiously enough.
The Sige5 v1.1 schematic was used to verify that GPIO0 A0 is the correct
pin for the RTC wakeup interrupt, so let's change it to that.
Fixes: 40f742b07ab2 ("arm64: dts: rockchip: Add rk3576-armsom-sige5 board")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250429-sige5-rtc-oopsie-v1-1-8686767d0f1f@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The atomic cpumask_assign_cpu() follows non-atomic cpumask_setall(),
which makes the whole operation non-atomic. Fix this by relaxing to
non-atomic __assign_cpu().
Fixes: 7c1e5b9690b0e14 ("riscv: Disable preemption while handling PR_RISCV_CTX_SW_FENCEI_OFF")
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
|
|
Restructure L1TF to use select/apply functions to create consistent
vulnerability handling.
Define new AUTO mitigation for L1TF.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-16-david.kaplan@amd.com
|
|
Restructure SSB to use select/apply functions to create consistent
vulnerability handling.
Remove __ssb_select_mitigation() and split the functionality between the
select/apply functions.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-15-david.kaplan@amd.com
|
|
Restructure spectre_v2 to use select/update/apply functions to create
consistent vulnerability handling.
The spectre_v2 mitigation may be updated based on the selected retbleed
mitigation.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-14-david.kaplan@amd.com
|
|
Restructure BHI mitigation to use select/update/apply functions to create
consistent vulnerability handling. BHI mitigation was previously selected
from within spectre_v2_select_mitigation() and now is selected from
cpu_select_mitigation() like with all others.
Define new AUTO mitigation for BHI.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-13-david.kaplan@amd.com
|
|
Restructure spectre_v2_user to use select/update/apply functions to
create consistent vulnerability handling.
The IBPB/STIBP choices are first decided based on the spectre_v2_user
command line but can be modified by the spectre_v2 command line option
as well.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-12-david.kaplan@amd.com
|
|
stm32mp23 SoCs
Adjust the size of 8kB GIC regions to 128kB so that each 4kB is mapped 16
times over a 64kB region.
The offset is then adjusted in the irq-gic driver.
see commit 12e14066f4835 ("irqchip/GIC: Add workaround for aliased GIC400")
Fixes: e9b03ef21386e ("arm64: dts: st: introduce stm32mp23 SoCs family")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Link: https://lore.kernel.org/r/20250415111654.2103767-7-christian.bruel@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use gic-400 compatible and remove address-cells = <1> for aarch64
Fixes: e9b03ef21386e ("arm64: dts: st: introduce stm32mp23 SoCs family")
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Link: https://lore.kernel.org/r/20250415111654.2103767-6-christian.bruel@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
stm32mp21 SoCs
Adjust the size of 8kB GIC regions to 128kB so that each 4kB is mapped
16 times over a 64kB region.
The offset is then adjusted in the irq-gic driver.
see commit 12e14066f4835 ("irqchip/GIC: Add workaround for aliased GIC400")
Fixes: 7a57b1bb1afbf ("arm64: dts: st: introduce stm32mp21 SoCs family")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Link: https://lore.kernel.org/r/20250415111654.2103767-5-christian.bruel@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use gic-400 compatible for aarch64
Fixes: 7a57b1bb1afbf ("arm64: dts: st: introduce stm32mp21 SoCs family")
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Link: https://lore.kernel.org/r/20250415111654.2103767-4-christian.bruel@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
stm32mp25 SoCs
Adjust the size of 8kB GIC regions to 128kB so that each 4kB is mapped 16
times over a 64kB region.
The offset is then adjusted in the irq-gic driver.
see commit 12e14066f4835 ("irqchip/GIC: Add workaround for aliased GIC400")
Fixes: 5d30d03aaf785 ("arm64: dts: st: introduce stm32mp25 SoCs family")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250415111654.2103767-3-christian.bruel@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use gic-400 compatible and remove address-cells = <1> on aarch64
Fixes: 5d30d03aaf785 ("arm64: dts: st: introduce stm32mp25 SoCs family")
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Link: https://lore.kernel.org/r/20250415111654.2103767-2-christian.bruel@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.15:
- An i.MX8MP change from Ahmad Fatoum to fix the broken nominal device
tree caused by commit 9f7595b3e5ae ("arm64: dts: imx8mp: configure
GPU and NPU clocks to overdrive rate")
- A MAINTAINERS update from Michael Riesch to exclude Sony IMX image
sensor drivers from i.MX entry
- A i.MX95 device tree change from Richard Zhu to correct the range of
PCIe app-reg region
- An opos6ul device tree change from Sébastien Szymanski to fix
an Ethernet regression caused by commit c7e73b5051d6 ("ARM: imx:
mach-imx6ul: remove 14x14 EVK specific PHY fixup")
- An imx8mm-verdin device tree change from Wojciech Dubowik to fix
a SD card regression caused by commit f5aab0438ef1 ("regulator:
pca9450: Fix enable register for LDO5")
* tag 'imx-fixes-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mm-verdin: Link reg_usdhc2_vqmmc to usdhc2
MAINTAINERS: add exclude for dt-bindings to imx entry
ARM: dts: opos6ul: add ksz8081 phy properties
arm64: dts: imx95: Correct the range of PCIe app-reg region
arm64: dts: imx8mp: configure GPU and NPU clocks in nominal DTSI
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Armv8 Morello fix for v6.15
Just a single fix addressing the cache node inconsistencies. It removed
unnecessary CPU number from L2 cache node names since they are local to
CPU nodes and should simply be named "l2-cache" and relocates the shared
L3 cache node from under cpu@0/l2-cache to the /cpus node, which is the
standard location for shared caches.
* tag 'juno-fix-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: morello: Fix-up cache nodes
|
|
Both SVM and VMX have similar implementation for executing an IBPB
between running different vCPUs on the same CPU to create separate
prediction domains for different vCPUs.
For VMX, when the currently loaded VMCS is changed in
vmx_vcpu_load_vmcs(), an IBPB is executed if there is no 'buddy', which
is the case on vCPU load. The intention is to execute an IBPB when
switching vCPUs, but not when switching the VMCS within the same vCPU.
Executing an IBPB on nested transitions within the same vCPU is handled
separately and conditionally in nested_vmx_vmexit().
For SVM, the current VMCB is tracked on vCPU load and an IBPB is
executed when it is changed. The intention is also to execute an IBPB
when switching vCPUs, although it is possible that in some cases an IBBP
is executed when switching VMCBs for the same vCPU. Executing an IBPB on
nested transitions should be handled separately, and is proposed at [1].
Unify the logic by tracking the last loaded vCPU and execuintg the IBPB
on vCPU change in kvm_arch_vcpu_load() instead. When a vCPU is
destroyed, make sure all references to it are removed from any CPU. This
is similar to how SVM clears the current_vmcb tracking on vCPU
destruction. Remove the current VMCB tracking in SVM as it is no longer
required, as well as the 'buddy' parameter to vmx_vcpu_load_vmcs().
[1] https://lore.kernel.org/lkml/20250221163352.3818347-4-yosry.ahmed@linux.dev
Link: https://lore.kernel.org/all/20250320013759.3965869-1-yosry.ahmed@linux.dev
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
[sean: tweak comment to stay at/under 80 columns]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When freeing a vCPU and thus its VMCB, clear current_vmcb for all possible
CPUs, not just online CPUs, as it's theoretically possible a CPU could go
offline and come back online in conjunction with KVM reusing the page for
a new VMCB.
Link: https://lore.kernel.org/all/20250320013759.3965869-1-yosry.ahmed@linux.dev
Fixes: fd65d3142f73 ("kvm: svm: Ensure an IBPB on all affected CPUs when freeing a vmcb")
Cc: stable@vger.kernel.org
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
[sean: split to separate patch, write changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
vmalloc_huge mappings
arm64 uses apply_to_page_range to change permissions for kernel vmalloc mappings,
which does not support changing permissions for block mappings. This function
will change permissions until it encounters a block mapping, and will bail
out with a warning. Since there are no reports of this triggering, it
implies that there are currently no cases of code doing a vmalloc_huge()
followed by partial permission change. But this is a footgun waiting to
go off, so let's detect it early and avoid the possibility of permissions
in an intermediate state. So, explicitly disallow changing permissions
for VM_ALLOW_HUGE_VMAP mappings.
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Dev Jain <dev.jain@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250403052844.61818-1-dev.jain@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Log size in addition to physical and virtual addresses. It has potential
to be helpful when DTB exceeds the 2 MB limit.
Initialize size to 0 to print out sane value if fixmap_remap_fdt fails
without setting the size.
Signed-off-by: Bartosz Szczepanek <bsz@amazon.de>
Link: https://lore.kernel.org/r/20250423084851.26449-1-bsz@amazon.de
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The selection of CRC32 by ARM64 was added by commit 7481cddf29ed
("arm64/lib: add accelerated crc32 routines") as a workaround for the
fact that, at the time, the CRC32 library functions used weak symbols to
allow architecture-specific overrides. That only worked when CRC32 was
built-in, and thus ARM64 was made to just force CRC32 to built-in.
Now that the CRC32 library no longer uses weak symbols, that no longer
applies. And the selection does not fulfill a user dependency either;
those all have their own selections from other options. Therefore, the
selection of CRC32 by ARM64 is no longer necessary. Remove it.
Note that this does not necessarily result in CRC32 no longer being set
to y, as it still tends to get selected by something else anyway.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250414174018.6359-1-ebiggers@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Doing:
#include <linux/mem_encrypt.h>
Causes a bunch of compiler failures due to missing implicit includes that
don't happen on x86:
../arch/arm64/include/asm/rsi_cmds.h:117:2: error: call to undeclared library function 'memcpy' with type 'void *(void *, const void *, unsigned long)'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
117 | memcpy(®s.a1, challenge, size);
../arch/arm64/include/asm/mem_encrypt.h:19:49: warning: declaration of 'struct device' will not be visible outside of this function [-Wvisibility]
19 | static inline bool force_dma_unencrypted(struct device *dev)
../arch/arm64/include/asm/rsi_cmds.h:44:38: error: call to undeclared function 'virt_to_phys'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
44 | arm_smccc_smc(SMC_RSI_REALM_CONFIG, virt_to_phys(cfg),
Add the missing includes to the arch/arm headers to avoid this.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-47aadfbd64cd+25795-arm_memenc_h_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When the 52-bit virtual addressing was introduced the select like
ARCH_MMAP_RND_BITS_MAX logic was never updated to account for it.
Because of that the rnd max bits knob is set to the default value of 18
when ARM64_VA_BITS=52.
Fix this by setting ARCH_MMAP_RND_BITS_MAX to the same value that would
be used if 48-bit addressing was used. Higher values can't used here
because 52-bit addressing is used only if the caller provides a hint to
mmap, with a fallback to 48-bit. The knob in question is an upper bound
for what the user can set in /proc/sys/vm/mmap_rnd_bits, which in turn
is used to determine how many random bits can be inserted into the base
address used for mmap allocations. Since 48-bit allocations are legal
with ARM64_VA_BITS=52, we need to make sure that the base address is
small enough to facilitate this.
Fixes: b6d00d47e81a ("arm64: mm: Introduce 52-bit Kernel VAs")
Signed-off-by: Kornel Dulęba <korneld@google.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250417114754.3238273-1-korneld@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The KVM PV ABI recently added a feature that allows the VM to discover
the set of physical CPU implementations, identified by a tuple of
{MIDR_EL1, REVIDR_EL1, AIDR_EL1}. Unlike other KVM PV features, the
expectation is that the VMM implements the hypercall instead of KVM as
it has the authoritative view of where the VM gets scheduled.
To do this the VMM needs to know the values of these registers on any
CPU in the system. While MIDR_EL1 and REVIDR_EL1 are already exposed,
AIDR_EL1 is not. Provide it in sysfs along with the other identification
registers.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250403231626.3181116-1-oliver.upton@linux.dev
Signed-off-by: Will Deacon <will@kernel.org>
|
|
While reading how `cntvct_el0` was read in the kernel, I found that
__arch_get_hw_counter() is doing something very similar to what
__arch_counter_get_cntvct() is already doing.
Use the existing __arch_counter_get_cntvct() function instead of
duplicating similar inline assembly code in __arch_get_hw_counter().
Both functions were performing nearly identical operations to read the
cntvct_el0 register. The only difference was that
__arch_get_hw_counter() included a memory clobber in its inline
assembly, which appears unnecessary in this context.
This change simplifies the code by eliminating duplicate functionality
and improves maintainability by centralizing the counter access logic in
a single implementation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20250407-arm-vdso-v1-1-7012de25b195@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For an architecture to enable CONFIG_ARCH_HAS_RESCHED_LAZY, two things are
required:
1) Adding a TIF_NEED_RESCHED_LAZY flag definition
2) Checking for TIF_NEED_RESCHED_LAZY in the appropriate locations
2) is handled in a generic manner by CONFIG_GENERIC_ENTRY, which isn't
(yet) implemented for arm64. However, outside of core scheduler code,
TIF_NEED_RESCHED_LAZY only needs to be checked on a kernel exit, meaning:
o return/entry to userspace.
o return/entry to guest.
The return/entry to a guest is all handled by xfer_to_guest_mode_handle_work()
which already does the right thing, so it can be left as-is.
arm64 doesn't use common entry's exit_to_user_mode_prepare(), so update its
return to user path to check for TIF_NEED_RESCHED_LAZY and call into
schedule() accordingly.
Link: https://lore.kernel.org/linux-rt-users/20241216190451.1c61977c@mordecai.tesarici.cz/
Link: https://lore.kernel.org/all/xhsmh4j0fl0p3.mognet@vschneid-thinkpadt14sgen2i.remote.csb/
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[testdrive, _TIF_WORK_MASK fixlet and changelog.]
Signed-off-by: Mike Galbraith <efault@gmx.de>
[Another round of testing; changelog faff]
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250305104925.189198-2-vschneid@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
* kvm-arm64/nv-pmu-fixes:
: .
: Fixes for NV PMU emulation. From the cover letter:
:
: "Joey reports that some of his PMU tests do not behave quite as
: expected:
:
: - MDCR_EL2.HPMN is set to 0 out of reset
:
: - PMCR_EL0.P should reset all the counters when written from EL2
:
: Oliver points out that setting PMCR_EL0.N from userspace by writing to
: the register is silly with NV, and that we need a new PMU attribute
: instead.
:
: On top of that, I figured out that we had a number of little gotchas:
:
: - It is possible for a guest to write an HPMN value that is out of
: bound, and it seems valuable to limit it
:
: - PMCR_EL0.N should be the maximum number of counters when read from
: EL2, and MDCR_EL2.HPMN when read from EL0/EL1
:
: - Prevent userspace from updating PMCR_EL0.N when EL2 is available"
: .
KVM: arm64: Let kvm_vcpu_read_pmcr() return an EL-dependent value for PMCR_EL0.N
KVM: arm64: Handle out-of-bound write to MDCR_EL2.HPMN
KVM: arm64: Don't let userspace write to PMCR_EL0.N when the vcpu has EL2
KVM: arm64: Allow userspace to limit the number of PMU counters for EL2 VMs
KVM: arm64: Contextualise the handling of PMCR_EL0.P writes
KVM: arm64: Fix MDCR_EL2.HPMN reset value
KVM: arm64: Repaint pmcr_n into nr_pmu_counters
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add missing id_aa64mmfr4 feature register check and update in
update_cpu_features(). Update the taint status as well.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250329034409.21354-2-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since commit
97d6786e0669 ("arm64: mm: account for hotplug memory when randomizing the linear region")
the decision whether or not to randomize the placement of the system's
DRAM inside the linear map is based on the capabilities of the CPU
rather than how much memory is present at boot time. This change was
necessary because memory hotplug may result in DRAM appearing in places
that are not covered by the linear region at all (and therefore
unusable) if the decision is solely based on the memory map at boot.
In the Android GKI kernel, which requires support for memory hotplug,
and is built with a reduced virtual address space of only 39 bits wide,
randomization of the linear map never happens in practice as a result.
And even on arm64 kernels built with support for 48 bit virtual
addressing, the wider PArange of recent CPUs means that linear map
randomization is slowly becoming a feature that only works on systems
that will soon be obsolete.
So let's just remove this feature. We can always bring it back in an
improved form if there is a real need for it.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250318134949.3194334-2-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The EFI specification has some elaborate rules about which runtime
services may be called while another runtime service call is already in
progress. In Linux, however, for simplicity, all EFI runtime service
invocations are serialized via the efi_runtime_lock semaphore.
This implies that calls to the helper pair arch_efi_call_virt_setup()
and arch_efi_call_virt_teardown() are serialized too, and are guaranteed
not to nest. Furthermore, the arm64 arch code has its own spinlock to
serialize use of the EFI runtime stack, of which only a single instance
exists.
This all means that the FP/SIMD and SVE state preserve/restore logic in
__efi_fpsimd_begin() and __efi_fpsimd_end() are also serialized, and
only a single instance of the associated per-CPU variables can ever be
in use at the same time. There is therefore no need at all for per-CPU
variables here, and they can all be replaced with singleton instances.
This saves a non-trivial amount of memory on systems with many CPUs.
To be more robust against potential future changes in the core EFI code
that may invalidate the reasoning above, move the invocations of
__efi_fpsimd_begin() and __efi_fpsimd_end() into the critical section
covered by the efi_rt_lock spinlock.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250318132421.3155799-2-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Restructure retbleed mitigation to use select/update/apply functions to create
consistent vulnerability handling. The retbleed_update_mitigation()
simplifies the dependency between spectre_v2 and retbleed.
The command line options now directly select a preferred mitigation
which simplifies the logic.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-11-david.kaplan@amd.com
|
