| Age | Commit message (Collapse) | Author |
|---|
|
Currently all debug exceptions share common entry code and are routed
to `do_debug_exception()`, which calls dynamically-registered
handlers for each specific debug exception. This is unfortunate as
different debug exceptions have different entry handling requirements,
and it would be better to handle these distinct requirements earlier.
Hardware breakpoints exceptions are generated by the hardware after user
configuration. As such, they can be exploited when training branch
predictors outside of the userspace VA range: they still need to call
`arm64_apply_bp_hardening()` if needed to mitigate against this attack.
However, they do not need to handle the Cortex-A76 erratum #1463225 as
it only applies to single stepping exceptions.
It does not set an address in FAR_EL1 either, only the hardware
watchpoint does.
As the hardware breakpoint handler only returns 0 and never triggers
the call to `arm64_notify_die()`, we can call it directly from
`entry-common.c`.
Split the hardware breakpoint exception entry, adjust
the function signature, and handling of the Cortex-A76 erratum to fit
the behaviour of the exception.
Move the call to `arm64_apply_bp_hardening()` to `entry-common.c` so that
we can do it as early as possible, and only for the exceptions coming
from EL0, where it is needed.
This is safe to do as it is `noinstr`, as are all the functions it
may call. `el0_ia()` and `el0_pc()` already call it this way.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-8-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Move the `debug_exception_enter()` and `debug_exception_exit()`
functions from mm/fault.c, as they are needed to split
the debug exceptions entry paths from the current unified one.
Make them externally visible in include/asm/exception.h until
the caller in mm/fault.c is cleaned up.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-7-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Remove all infrastructure for the dynamic registration previously used by
software breakpoints and stepping handlers.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-6-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Software stepping checks for the correct handler by iterating over a list
of dynamically registered handlers and calling all of them until one
handles the exception.
This is the only generic way to handle software stepping handlers in arm64
as the exception does not provide an immediate that could be checked,
contrary to software breakpoints.
However, the registration mechanism is not exported and has only
two current users : the KGDB stepping handler, and the uprobe single step
handler.
Given that one comes from user mode and the other from kernel mode, call
the appropriate one by checking the source EL of the exception.
Add a stand-in that returns DBG_HOOK_ERROR when the configuration
options are not enabled.
Remove `arch_init_uprobes()` as it is not useful anymore and is
specific to arm64.
Unify the naming of the handler to XXX_single_step_handler(), making it
clear they are related.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-5-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Software breakpoints pass an immediate value in ESR ("comment") that can
be used to call a specialized handler (KGDB, KASAN...).
We do so in two different ways :
- During early boot, `early_brk64` statically checks against known
immediates and calls the corresponding handler,
- During init, handlers are dynamically registered into a list. When
called, the generic software breakpoint handler will iterate over
the list to find the appropriate handler.
The dynamic registration does not provide any benefit here as it is not
exported and all its uses are within the arm64 tree. It also depends on an
RCU list, whose safe access currently relies on the non-preemptible state
of `do_debug_exception`.
Replace the list iteration logic in `call_break_hooks` to call
the breakpoint handlers statically if they are enabled, like in
`early_brk64`.
Expose the handlers in their respective headers to be reachable from
`arch/arm64/kernel/debug-monitors.c` at link time.
Unify the naming of the software breakpoint handlers to XXX_brk_handler(),
making it clear they are related and to differentiate from the
hardware breakpoints.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250707114109.35672-4-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
`aarch32_break_handler()` is called in `do_el0_undef()` when we
are trying to handle an exception whose Exception Syndrome is unknown.
It checks if the instruction hit might be a 32-bit arm break (be it
A32 or T2), and sends a SIGTRAP to userspace if it is so that it can
be handled.
However, this is badly represented in the naming of the function, and
is not consistent with the other functions called with the same logic
in `do_el0_undef()`.
Rename it `try_handle_aarch32_break()` and change the return value to
a boolean to align with the logic of the other tentative handlers in
`do_el0_undef()`, the previous error code being ignored anyway.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250707114109.35672-3-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Remove the unnecessary boolean which always checks if the handler was found
and return early instead.
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250707114109.35672-2-ada.coupriediaz@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Enable MT25QU512ABB8E12 FLASH connected to XSPI.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250704140823.163572-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable MT25QU512ABB8E12 FLASH connected to XSPI.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250704140823.163572-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add XSPI node to RZ/V2H(P) ("R9A09G057") SoC DTSI.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250704140823.163572-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add XSPI node to RZ/V2N ("R9A09G056") SoC DTSI.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250704140823.163572-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Rename the GBETH1 pinctrl node from "eth0" to "eth1" to avoid duplicate
node names in the DT and correctly reflect the label "eth1_pins".
Fixes: f111192baa80 ("arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Enable GBETH")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250703235544.715433-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Rename the GBETH1 pinctrl node from "eth0" to "eth1" to avoid duplicate
node names in the DT and correctly reflect the label "eth1_pins".
Fixes: 802292ee27a7 ("arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable GBETH")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250703235544.715433-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The target to consider the dtbo file for installation is missing, add
it.
Fixes: a719915e76f2 ("arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/20250701112612.3957799-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable the Gigabit Ethernet Interfaces (GBETH) populated on the RZ/G3E SMARC EVK
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250702005706.1200059-5-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
RZ/G3E SMARC EVK has 3 user buttons called USER_SW1, USER_SW2 and
USER_SW3 and SLEEP button with NMI support. Add a DT node in device tree
to instantiate the gpio-keys driver for these buttons.
The system can enter into STR state by pressing the sleep button and
wakeup from STR is done by pressing power button. The USER_SW{1,2,3}
configured as wakeup-source, so it can wakeup the system during s2idle.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250702092755.70847-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU speculation fixes from Borislav Petkov:
"Add the mitigation logic for Transient Scheduler Attacks (TSA)
TSA are new aspeculative side channel attacks related to the execution
timing of instructions under specific microarchitectural conditions.
In some cases, an attacker may be able to use this timing information
to infer data from other contexts, resulting in information leakage.
Add the usual controls of the mitigation and integrate it into the
existing speculation bugs infrastructure in the kernel"
* tag 'tsa_x86_bugs_for_6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/process: Move the buffer clearing before MONITOR
x86/microcode/AMD: Add TSA microcode SHAs
KVM: SVM: Advertise TSA CPUID bits to guests
x86/bugs: Add a Transient Scheduler Attacks mitigation
x86/bugs: Rename MDS machinery to something more generic
|
|
Introduce a new KVM capability to expose to the userspace whether
cacheable mapping of PFNMAP is supported.
The ability to safely do the cacheable mapping of PFNMAP is contingent
on S2FWB and ARM64_HAS_CACHE_DIC. S2FWB allows KVM to avoid flushing
the D cache, ARM64_HAS_CACHE_DIC allows KVM to avoid flushing the icache
and turns icache_inval_pou() into a NOP. The cap would be false if
those requirements are missing and is checked by making use of
kvm_arch_supports_cacheable_pfnmap.
This capability would allow userspace to discover the support.
It could for instance be used by userspace to prevent live-migration
across FWB and non-FWB hosts.
CC: Catalin Marinas <catalin.marinas@arm.com>
CC: Jason Gunthorpe <jgg@nvidia.com>
CC: Oliver Upton <oliver.upton@linux.dev>
CC: David Hildenbrand <david@redhat.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250705071717.5062-7-ankita@nvidia.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KVM currently forces non-cacheable memory attributes (either Normal-NC
or Device-nGnRE) for a region based on pfn_is_map_memory(), i.e. whether
or not the kernel has a cacheable alias for it. This is necessary in
situations where KVM needs to perform CMOs on the region but is
unnecessarily restrictive when hardware obviates the need for CMOs.
KVM doesn't need to perform any CMOs on hardware with FEAT_S2FWB and
CTR_EL0.DIC. As luck would have it, there are implementations in the
wild that need to map regions of a device with cacheable attributes to
function properly. An example of this is Nvidia's Grace Hopper/Blackwell
systems where GPU memory is interchangeable with DDR and retains
properties such as cacheability, unaligned accesses, atomics and
handling of executable faults. Of course, for this to work in a VM the
GPU memory needs to have a cacheable mapping at stage-2.
Allow cacheable stage-2 mappings to be created on supporting hardware
when the VMA has cacheable memory attributes. Check these preconditions
during memslot creation (in addition to fault handling) to potentially
'fail-fast' as a courtesy to userspace.
CC: Oliver Upton <oliver.upton@linux.dev>
CC: Sean Christopherson <seanjc@google.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Tested-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250705071717.5062-6-ankita@nvidia.com
[ Oliver: refine changelog, squash kvm_supports_cacheable_pfnmap() patch ]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Fixes a security bug due to mismatched attributes between S1 and
S2 mapping.
Currently, it is possible for a region to be cacheable in the userspace
VMA, but mapped non cached in S2. This creates a potential issue where
the VMM may sanitize cacheable memory across VMs using cacheable stores,
ensuring it is zeroed. However, if KVM subsequently assigns this memory
to a VM as uncached, the VM could end up accessing stale, non-zeroed data
from a previous VM, leading to unintended data exposure. This is a security
risk.
Block such mismatch attributes case by returning EINVAL when userspace
try to map PFNMAP cacheable. Only allow NORMAL_NC and DEVICE_*.
CC: Oliver Upton <oliver.upton@linux.dev>
CC: Catalin Marinas <catalin.marinas@arm.com>
CC: Sean Christopherson <seanjc@google.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250705071717.5062-4-ankita@nvidia.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
This commit fixes a typo introduced in commit
ee368a10d0df ("ARM: dts: am335x-boneblack.dts: unique gpio-line-names").
gpio0_7 is located on the P9 header on the BBB.
This was verified with a BeagleBone Black by toggling the pin and
checking with a multimeter that it corresponds to pin 42 on the P9
header.
Signed-off-by: Albin Törnqvist <albin.tornqvist@codiax.se>
Link: https://lore.kernel.org/r/20250624114839.1465115-2-albin.tornqvist@codiax.se
Fixes: ee368a10d0df ("ARM: dts: am335x-boneblack.dts: unique gpio-line-names")
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The wiring of the RS-485 transceiver of UART0 of the PDU-001 board
allows sending or receiving date exclusively. In other words: no
character transmitted will ever be received.
Hence the tx-filter counter in the OMAP serial driver can't work
correctly as it relies on receiving the transmitted characters.
This in turn will prevent reception of data unless we disable the
tx-filter counter.
This patch disables the tx-filter counter by enabling the DTS setting
rs485-rx-during-tx. This might sound like the opposite to be done but
it uses the enabling of rs485-rx-during-tx not for receiving the data
transmitted but for disabling the tx-fiter counter.
Tested-by: Felix Brack <fb@ltec.ch>
Signed-off-by: Felix Brack <fb@ltec.ch>
Link: https://lore.kernel.org/r/20250529135324.182868-1-fb@ltec.ch
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Multiple drivers can report priorities to ITMT. To aid in debugging
any issues with the values reported by drivers introduce a debugfs
file to read out the values.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/20250609200518.3616080-14-superm1@kernel.org
|
|
Incorporate a mechanism within the context switching code to reset the
hardware history for AMD processors. Specifically, when a task is switched in,
the class ID is read and the hardware workload classification history of the
CPU firmware is reset. Then, the workload classification for the next running
thread is begun.
[ bp: Massage commit message. ]
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/20250609200518.3616080-10-superm1@kernel.org
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
This is prepare to hiding snd_soc_dapm_context inside soc-dapm.c
|
|
Introduce new MSR registers for AMD hardware feedback support. They provide
workload classification and configuration capabilities.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/20250609200518.3616080-4-superm1@kernel.org
|
|
We have dedictaded bindings for scl/sda nowadays. Switch away from the
deprecated plain 'gpios' property.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
We can use string choices helper, let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Despite its name, kvm_is_device_pfn() is actually used to determine if a
given PFN has a kernel mapping that can be used to perform cache
maintenance, as it calls pfn_is_map_memory() internally.
Expand the helper into its single callsite and further condition the
check on the VMA having either VM_PFNMAP or VM_MIXEDMAP set. VMAs that
set neither of these flags must always contain Normal, struct page
backed memory with valid aliases in the kernel address space.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250705071717.5062-3-ankita@nvidia.com
[ Oliver: fixed typos, refined changelog ]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
To perform cache maintenance on a region of memory, KVM/arm64 relies on
that region having a cacheable alias in the kernel's address space which
can be used with CMO instructions.
The 'device' variable is somewhat of a misnomer, as it actually
indicates whether or not the stage-2 alias is allowed to have cacheable
memory attributes. The resulting stage-2 memory attributes are further
modified by VM_ALLOW_ANY_UNCACHED, selecting between Normal-NC or
Device-nGnRE depending on what the endpoint supports.
Rename the to s2_force_noncacheable such that its purpose is a bit more
obvious.
CC: Catalin Marinas <catalin.marinas@arm.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250705071717.5062-2-ankita@nvidia.com
[ Oliver: addressed typos, wound up rewriting changelog ]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Selecting the IVC, HSP and BPMP drivers via Kconfig is problematic
because it can create conflicting configurations. Instead, enable them
in the default configuration.
Link: https://lore.kernel.org/r/20250506133118.1011777-12-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add in mt8395-genio-1200-evk devicetree file a sub node in pmic for
the mt6359-keys compatible to add the Power and Home MT6359 PMIC keys
support.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250703-add-mt6359-pmic-keys-support-v1-3-21a4d2774e34@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add in mt8390-genio-common dtsi file the support of Home MT6359 PMIC
key.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://lore.kernel.org/r/20250703-add-mt6359-pmic-keys-support-v1-2-21a4d2774e34@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Bananapi R4 has a green and a blue led which can be switched by gpio.
Green led is for running state so default on.
Green led also shares pin with eeprom writeprotect where led off allows
writing to eeprom.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250706132213.20412-14-linux@fw-web.de
[Angelo: Fixed missing dt-bindings/leds/common.h header inclusion]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Replace verbatim license text with a `SPDX-License-Identifier`
The comment header mis-attributes this license to be "X11", but the
license text does not include the last line "Except as contained in this
notice, the name of the X Consortium shall not be used in advertising or
otherwise to promote the sale, use or other dealings in this Software
without prior written authorization from the X Consortium.". Therefore,
this license is actually equivalent to the SPDX "MIT" license (confirmed
by text diffing).
Cc: Lothar Waßmann <LW@KARO-electronics.de>
Acked-By: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This adds the USB support for the s32g2 and s32g3 SoCs.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/e3e5041e-254d-44c3-b645-532d4d7a8f9e@sabinyo.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pins were moved from SoC dtsi to Board level dtsi without cleaning up
to needed ones. Drop the unused pins now.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250706132213.20412-13-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
CCI requires proc-supply. Add it on board level.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250706132213.20412-12-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add cci devicetree node for cpu frequency scaling.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250706132213.20412-9-linux@fw-web.de
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Introduce ethernet controller nodes to EN7581 SoC and EN7581 evaluation
board.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20250520-en7581-net-v1-1-5317f8e829ad@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
fail-needs-probe
Different Spherion variants use different trackpads on the same I2C2
bus. Instead of enabling all of them by default, mark them as
"fail-needs-probe" and let the implementation determine which one is
actually present.
Additionally, move the trackpad pinctrl entry back to the individual
trackpad nodes.
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250318102259.189289-3-laura.nao@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add a device tree for the MT8186 based Squirtle Chromebooks, also known
as the Acer Chromebook Spin 311 (R724T). The device is a 2-in-1
convertible.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250617082004.1653492-7-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
There are only two different SKUs of Voltorb, and the only difference
between them is whether a touchscreen is present or not. This can be
detected by a simple I2C transfer to the address, instead of having
separate device trees.
Merge the two device trees together and simplify the compatible string
list. The dtsi is still kept separate since there is an incoming device
that shares the same design, but with slightly difference components.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250617082004.1653492-6-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Steelix design has two possible trackpad component sources. Currently
they are all marked as available, along with having workarounds for
shared pinctrl muxing and GPIOs.
Instead, mark them all as "fail-needs-probe" and have the implementation
try to probe which one is present.
Also remove the shared resource workaround by moving the pinctrl entry
for the trackpad interrupt line back into the individual trackpad nodes.
Cc: stable+noautosel@kernel.org # Needs accompanying new driver to work
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250617082004.1653492-5-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into gpio/for-next
Runtime PM updates related to autosuspend for 6.17
Make several autosuspend functions mark last busy stamp and update
the documentation accordingly (Sakari Ailus).
|
|
Immutable branch between GPIO, MFD and ARM-SoC for v6.17-rc1
Remove struct bgpio_pdata after converting its users to generic device
properties.
|
|
LDO5 regulator is used to power the i.MX8MM NVCC_SD2 I/O supply, that is
used for the SD2 card interface and also for some GPIOs.
When the SD card interface is not enabled the regulator subsystem could
turn off this supply, since it is not used anywhere else, however this
will also remove the power to some other GPIOs, for example one I/O that
is used to power the ethernet phy, leading to a non working ethernet
interface.
[ 31.820515] On-module +V3.3_1.8_SD (LDO5): disabling
[ 31.821761] PMIC_USDHC_VSELECT: disabling
[ 32.764949] fec 30be0000.ethernet end0: Link is Down
Fix this keeping the LDO5 supply always on.
Cc: stable@vger.kernel.org
Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Fixes: f5aab0438ef1 ("regulator: pca9450: Fix enable register for LDO5")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The GPIO device in crag6410 is registered with struct bgpio_pdata passed
as platform_data to the gpio-mmio driver. We want to remove the
bgpio_pdata from the kernel and the gpio-mmio driver is now also able to
get the relevant values from the software node. Set up device properties
and switch to using platform_device_info to register the device as
platform_add_devices() doesn't allow us to pass device properties to the
driver model.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250701-gpio-mmio-pdata-v2-5-ebf34d273497@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The two latch GPIO devices in ams-delta are registered with struct
bgpio_pdata passed as platform_data to the gpio-mmio driver. We want to
remove the bgpio_pdata from the kernel and the gpio-mmio driver is now
also able to get the relevant values from the software node. Set up
device properties and switch to using platform_device_info to register
the devices as platform_add_devices() doesn't allow us to pass device
properties to the driver model.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20250701-gpio-mmio-pdata-v2-4-ebf34d273497@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the legacy generic
gpio-reg module to using them. We have to update the two legacy ARM
platforms that use it at the same time as they call the set_multiple()
callbacks directly (they shouldn't but it's old technical debt I
suppose).
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250623-gpiochip-set-rv-gpio-v3-1-90f0e170a846@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
