| Age | Commit message (Collapse) | Author |
|---|
|
Add a kernel command-line parameter to enable or disable the exposure of
the L3 Smart Data Cache Injection Allocation Enforcement (SDCIAE) hardware
feature to resctrl.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/c623edf7cb369ba9da966de47d9f1b666778a40e.1762995456.git.babu.moger@amd.com
|
|
Enforcement
Smart Data Cache Injection (SDCI) is a mechanism that enables direct insertion
of data from I/O devices into the L3 cache. By directly caching data from I/O
devices rather than first storing the I/O data in DRAM, SDCI reduces demands on
DRAM bandwidth and reduces latency to the processor consuming the I/O data.
The SDCIAE (SDCI Allocation Enforcement) PQE feature allows system software to
control the portion of the L3 cache used for SDCI.
When enabled, SDCIAE forces all SDCI lines to be placed into the L3 cache
partitions identified by the highest-supported L3_MASK_n register, where n is
the maximum supported CLOSID.
Add CPUID feature bit that can be used to configure SDCIAE.
The SDCIAE feature details are documented in:
AMD64 Architecture Programmer's Manual Volume 2: System Programming
Publication # 24593 Revision 3.41 section 19.4.7 L3 Smart Data Cache
Injection Allocation Enforcement (SDCIAE).
available at https://bugzilla.kernel.org/show_bug.cgi?id=206537
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/83ca10d981c48e86df2c3ad9658bb3ba3544c763.1762995456.git.babu.moger@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/defconfig
Rockchip support for basic camera interface (CIF) and Synopsis DW-DP
driver, as well as the CEC extension to the DW-HDMI-QP driver.
* tag 'v6.19-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: defconfig: enable rockchip camera interface
arm64: defconfig: Enable DW HDMI QP CEC support
arm64: defconfig: Enable Rockchip extensions for Synopsys DW DP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Qualcomm Arm64 defconfig updates for v6.19
Enable config options for the hardare used across Fairphone 3, 4, and 5.
Then enable Novatek display panels founds on Xiaomi Pocophone F1, and
the SM8750 MTP, eUSB2 PHY found in SM8750, NSS clock controller found in
IPQ5424, the SX150x gpio expander used in QCS615 reference device, and
the support for UFS inline crypto.
* tag 'qcom-arm64-defconfig-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable SX150x GPIO expander driver
arm64: defconfig: Build NSS clock controller driver for IPQ5424
arm64: defconfig: Enable SCSI UFS Crypto and Block Inline encryption drivers
arm64: defconfig: Add M31 eUSB2 PHY config
arm64: defconfig: Enable configs for Fairphone 3, 4, 5 smartphones
arm64: defconfig: Enable two Novatek display panels for MTP8750 and Tianma
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/defconfig
multi_v7_defconfig: Enable TI PRU Ethernet driver
* tag 'omap-for-v6.19/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: multi_v7_defconfig: Enable TI PRU Ethernet driver
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/defconfig
Microchip AT91 defconfig updates for v6.19
This update includes:
- CONFIG_MMC_SPI is set to module for at91_dt_defconfig
* tag 'at91-defconfig-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: at91_dt_defconfig: set MMC_SPI to module
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig
i.MX defconfig changes for 6.19:
- Enable sound drivers for imx28-amarula-rmm in mxs_defconfig
- Enable i.MX AIPSTZ driver, i.MX95 pinctrl driver, Ethernet and PCIe
support in arm64 defconfig
* tag 'imx-defconfig-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: enable i.MX AIPSTZ driver
ARM: mxs_defconfig: enable sound drivers for imx28-amarula-rmm
arm64: defconfig: Enable i.MX95 drivers for pinctrl, Ethernet and PCIe
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/defconfig
arm64: tegra: Default configuration changes for v6.19-rc1
Enable the new driver for the VRS PSEQ RTC found on Tegra234 and later.
* tag 'tegra-for-6.19-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable NVIDIA VRS PSEQ RTC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/defconfig
ARM: tegra: Default configuration changes for v6.19-rc1
Enable ext4 by default on Tegra to restore systems booting from MMC.
* tag 'tegra-for-6.19-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Enable EXT4 for Tegra
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/defconfig
MediaTek defconfig updates
As MediaTek boards with UFS appeared some time ago, this adds a
single commit enabling the MediaTek UFS driver, allowing those
boards to boot over UFS as primary storage.
* tag 'mtk-defconfig-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm64: defconfig: Enable UFS support for MediaTek Genio 1200 EVK UFS board
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable the Exynos ACPM clocks driver. Samsung Exynos platforms
implement ACPM to provide support for clock configuration, PMIC
and temperature sensors.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org> # on gs101-oriole
Link: https://patch.msgid.link/20251010-acpm-clk-v6-5-321ee8826fd4@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251110121344.120785-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/defconfig
Renesas ARM defconfig updates for v6.19
- Enable support for the Renesas RZ/G3S and RZ/G3E thermal drivers,
and the RZ/T2H and RZ/N2H ADC drivers in the ARM64 defconfig,
- Refresh the ARM SH-Mobile defconfig for v6.18-rc1.
* tag 'renesas-arm-defconfig-for-v6.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable RZ/T2H / RZ/N2H ADC driver
ARM: shmobile: defconfig: Refresh for v6.18-rc1
arm64: defconfig: Enable the Renesas RZ/G3E thermal driver
arm64: defconfig: Enable Renesas RZ/G3S thermal driver
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The patch "7bd291abe2d sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig"
has enabled the SCHED_MC/SCHED_SMT by default for arm64.
So remove the redundant code in defconfig.
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Huang Shijie <shijie@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20251021075704.527626-1-shijie@os.amperecomputing.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/newsoc
Initial Anlogic Platform Support
Add bindings for the serial and timer peripherals, and a basic soc dtsi
for the Anlogic dr1v90 SoC. The Milianke MLKPAI FS01 is the first board
for this SoC. Add myself as maintainer for this platform for the time
being.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'anlogic-initial-6.19-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
MAINTAINERS: Setup support for Anlogic tree
riscv: defconfig: Enable Anlogic SoC
riscv: dts: anlogic: Add Milianke MLKPAI FS01 board
riscv: dts: Add initial Anlogic DR1V90 SoC device tree
riscv: Add Anlogic SoC famly Kconfig support
dt-bindings: serial: snps-dw-apb-uart: Add Anlogic DR1V90 uart
dt-bindings: timer: Add Anlogic DR1V90 ACLINT MTIMER
dt-bindings: riscv: Add Anlogic DR1V90
dt-bindings: riscv: Add Nuclei UX900 compatibles
dt-bindings: vendor-prefixes: Add Anlogic, Milianke and Nuclei
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.18, 2nd round:
- Correct i.MX8DXL's pcie-ep interrupt number (Frank Li)
- Swap interrupt numbers of eqos for imx8dxl-ss-conn (Frank Li)
- Correct SAI3 interrupt line for i.MX6UL (Maarten Zanders)
- Correct mux-controller select/enable-gpios polarity for imx8qm-mek
board (Xu Yang)
* tag 'imx-fixes-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8qm-mek: fix mux-controller select/enable-gpios polarity
ARM: dts: nxp: imx6ul: correct SAI3 interrupt line
arm64: dts: imx8dxl-ss-conn: swap interrupts number of eqos
arm64: dts: imx8dxl: Correct pcie-ep interrupt number
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Corrected minor typo in versatile.c
- Fixed "documentaton" to "documentation"
Signed-off-by: Shivam Chaudhary <cvam0000@gmail.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251023223258.3181274-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/arm
MediaTek mach ARM32 updates
This adds support for the MT6582 SoC and its SMP bringup code.
This SoC is found in old smartphones and tablets from various
manufacturers.
* tag 'mtk-arm32-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
ARM: mediatek: add MT6582 smp bring up code
ARM: mediatek: add board_dt_compat entry for the MT6582 SoC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch series introduces platform support for Black Sesame Technologies
(BST) C1200 SoC and CDCU1.0 ADAS 4C2G board. BST is a leading automotive-grade
computing SoC provider focusing on intelligent driving, computer vision, and AI
capabilities for ADAS and autonomous driving applications. You can find more
information about the SoC and related boards at: https://bst.ai
This series provides the foundational platform enablement including device tree
bindings, SoC and board device trees, platform configuration, and maintainer
information. MMC/SDHCI driver support will be submitted in a separate patch series.
* bst/newsoc:
MAINTAINERS: add Black Sesame Technologies (BST) ARM SoC support
arm64: defconfig: enable BST platform support
arm64: dts: bst: add support for Black Sesame Technologies C1200 CDCU1.0 board
arm64: Kconfig: add ARCH_BST for Black Sesame Technologies SoCs
dt-bindings: arm: add Black Sesame Technologies (bst) SoC
dt-bindings: vendor-prefixes: Add Black Sesame Technologies Co., Ltd.
Link: https://lore.kernel.org/all/20251016120558.2390960-1-yangzh0906@thundersoft.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable support for Black Sesame Technologies (BST) platform
in the ARM64 defconfig:
- CONFIG_ARCH_BST: Enable BST SoC platform support
Signed-off-by: Albert Yang <yangzh0906@thundersoft.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add device tree support for the Black Sesame Technologies (BST) C1200
CDCU1.0 ADAS 4C2G platform. This platform is based on the BST C1200 SoC
family.
The changes include:
- Adding a new BST device tree directory
- Adding Makefile entries to build the BST platform device trees
- Adding the device tree for the BST C1200 CDCU1.0 ADAS 4C2G board
This board features a quad-core Cortex-A78 CPU, and various peripherals
including UART, and interrupt controller.
Signed-off-by: Albert Yang <yangzh0906@thundersoft.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add ARCH_BST configuration option to enable support for Black Sesame
Technologies SoC family. BST produces automotive-grade system-on-chips
for intelligent driving, focusing on computer vision and AI capabilities.
The BST C1200 family includes SoCs for ADAS and autonomous driving
applications.
Signed-off-by: Albert Yang <yangzh0906@thundersoft.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.19 part2
Late fixes and cleanups:
* Fix build warnings for unapplied overlays for PHYTEC, SA67 and certain TI EVM
* Fix pinmux of SD regulator control line on J721e SK
* Correct unit address of cbass_wakeup node for AM62L
* tag 'ti-k3-dt-for-v6.19-part2' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: dts: ti: k3-am62l: Fix unit address of cbass_wakeup
arm64: dts: ti: k3-j721e-sk: Fix pinmux for pin Y1 used by power regulator
arm64: dts: ti: Add missing applied DT overlay targets
arm64: dts: ti: sa67: add build time dtb for overlays
arm64: dts: ti: Enable build testing of PHYTEC board overlays
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt64 for 6.19 (part 1)
pinctrl node names cleanup from Rob on Marvell device tree files
Proper fix for pci errors on armada cp11x based platforms
* tag 'mvebu-dt64-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
clk: mvebu: cp110 add CLK_IGNORE_UNUSED to pcie_x10, pcie_x11 & pcie_x4
Revert "arm64: dts: marvell: cn9132-clearfog: fix multi-lane pci x2 and x4 ports"
arm64/arm: dts: marvell: Rename "nand-rb" pinctrl node names
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
RISC-V Devicetrees for v6.19
Sophgo:
For CV18xx serials:
Add top syscon device related DTS change, the top system
controller provides register access to configure some
misc modules, such as usb2 phy and a dma multiplexer.
For SG2042:
There are two changes. The first one is to add DTS
definition for PCIe controllers for SoC SG2042 and
boards such as Pioneerbox/EVB_V1/EVB_V2 uses SG2042.
The second one is to add DTS to support SPI-NOR flash
controllers for this SoC and the same for related boards.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-dt-for-v6.19' of https://github.com/sophgo/linux:
riscv: dts: sophgo: Enable SPI NOR node for SG2042_EVB_V2
riscv: dts: sophgo: Enable SPI NOR node for SG2042_EVB_V1
riscv: dts: sophgo: Enable SPI NOR node for PioneerBox
riscv: dts: sophgo: Add SPI NOR node for SG2042
riscv: dts: sophgo: Add USB support for cv18xx
riscv: dts: sophgo: Add syscon node for cv18xx
dt-bindings: soc: sophgo: add TOP syscon for CV18XX/SG200X series SoC
riscv: sophgo: dts: enable PCIe for SG2042_EVB_V2.0
riscv: sophgo: dts: enable PCIe for SG2042_EVB_V1.X
riscv: sophgo: dts: enable PCIe for PioneerBox
riscv: sophgo: dts: add PCIe controllers for SG2042
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/cix into soc/dt
CIX device tree changes for v6.19-rc1, add below new components support:
- PCIe
- Pinctrl
- SPI
* tag 'cix-dt-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/cix:
arm64: dts: cix: add a compatible string for the cix sky1 SoC
arm64: dts: cix: Enable PCIe on the Orion O6 board
arm64: dts: cix: Add PCIe Root Complex on sky1
arm64: dts: cix: Add pinctrl nodes for sky1
arm64: dts: cix: add DT nodes for SPI
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.19, round 1
Highlights:
-----------
- MPU:
- STM32MP13:
- Add and enable the ARM SMC watchdog to use IWDG1 in the secure
world.
- STMP32MP15:
- Phytec SOM: Fix STMPE811 touchscreen
- LXA: drop unnecessary vusb_d/a-supply as already defined by
"phy-supply" and "vdda1v8-supply".
- STM32MP23:
- Use the RIFSC as an access controler (firewall) as it is done
for STM32MP25 and STM32MP23.
- STM32MP25:
- Add OSPI memory region name.
- Add I/O synchronization properties to satisfy RGMII
specification.
* tag 'stm32-dt-for-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
arm64: dts: st: set RIFSC as an access controller on stm32mp21x platforms
ARM: dts: stm32: add the IWDG2 interrupt line in stm32mp131.dtsi
ARM: dts: stm32: enable the ARM SMC watchdog node in stm32mp135f-dk
ARM: dts: stm32: add the ARM SMC watchdog in stm32mp131.dtsi
ARM: dts: stm32: add iwdg1 node in stm32mp131.dtsi
arm64: dts: st: Add I/O sync to eth pinctrl in stm32mp25-pinctrl.dtsi
arm64: dts: st: Add memory-region-names property for stm32mp257f-ev1
ARM: dts: stm32: lxa: drop unnecessary vusb_d/a-supply
ARM: dts: stm32: stm32mp157c-phycore: Fix STMPE811 touchscreen node properties
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: 9Tripod X3568, 100ASK DShanPi A1, LinkEase EasePi R1,
FriendlyElec NanoPi R76S
Interesting archeological addition: RK3368 (2015) gets display
output afterall.
New peripherals: vicap on px30 and rk356x, PCIe Gen2x1 on RK3528,
use actual clock-ids for SCMI clocks - not hardcoded numbers,
CQE support for the eMMC on RK3588.
As well as a number of enablements for individual boards.
For example enablement for the now usable NPU.
* tag 'v6.19-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (43 commits)
arm64: dts: rockchip: add vicap node to rk356x
arm64: dts: rockchip: add the vip node to px30
arm64: dts: rockchip: fixes audio for 100ASK DshanPi A1
arm64: dts: rockchip: fixes vcc3v3_s0 supply for 100ASK DshanPi A1
arm64: dts: rockchip: fixes ethernet for 100ASK DshanPi A1
arm64: dts: rockchip: fixes regulator for 100ASK DshanPi A1
arm64: dts: rockchip: correct assigned-clock-rates spelling on 2 boards
arm64: dts: rockchip: clean up devicetree for 9Tripod X3568 v4
arm64: dts: rockchip: Enable USB-C DP Alt for Indiedroid Nova
arm64: dts: rockchip: add eMMC CQE support for rk3588
arm64: dts: rockchip: enable HDMI audio on Rock 5 ITX
arm64: dts: rockchip: Add eeprom vcc-supply for Radxa ROCK 3C
arm64: dts: rockchip: Add eeprom vcc-supply for Radxa ROCK 5A
arm64: dts: rockchip: Move the EEPROM to correct I2C bus on Radxa ROCK 5A
arm64: dts: rockchip: use SCMI clock id for gpu clock on rk356x
arm64: dts: rockchip: Remove sdmmc max-frequency on RK3588S EVB1 board
arm64: dts: rockchip: Remove sdmmc max-frequency for Radxa ROCK 5 ITX/5B/5B+/5T
arm64: dts: rockchip: Switch microSD card detect to gpio on Radxa ROCK 5 ITX/5C
arm64: dts: rockchip: Add devicetree for the 9Tripod X3568 v4
dt-bindings: arm: rockchip: Add 9Tripod X3568 series
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
A number of cleanups for older socs.
* tag 'v6.19-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: move edp assigned-clocks to edp node on rk3288
ARM: dts: rockchip: Add spi_flash label to rk3288-veyron
ARM: dts: rockchip: Remove mshc aliases from RK3288
ARM: dts: rockchip: Adapt tps65910 nodes on RK3066 boards
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Extend the logic of handling CMCI storms to AMD threshold interrupts.
Rely on the similar approach as of Intel's CMCI to mitigate storms per CPU and
per bank. But, unlike CMCI, do not set thresholds and reduce interrupt rate on
a storm. Rather, disable the interrupt on the corresponding CPU and bank.
Re-enable back the interrupts if enough consecutive polls of the bank show no
corrected errors (30, as programmed by Intel).
Turning off the threshold interrupts would be a better solution on AMD systems
as other error severities will still be handled even if the threshold
interrupts are disabled.
[ Tony: Small tweak because mce_handle_storm() isn't a pointer now ]
[ Yazen: Rebase and simplify ]
[ Avadhut: Remove check to not clear bank's bit in mce_poll_banks and fix
checkpatch warnings. ]
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251121190542.2447913-3-avadhut.naik@amd.com
|
|
Currently, when a CMCI storm detected on a Machine Check bank, subsides, the
bank's corresponding bit in the mce_poll_banks per-CPU variable is cleared
unconditionally by cmci_storm_end().
On AMD SMCA systems, this essentially disables polling on that particular bank
on that CPU. Consequently, any subsequent correctable errors or storms will not
be logged.
Since AMD SMCA systems allow banks to be managed by both polling and
interrupts, the polling banks bitmap for a CPU, i.e., mce_poll_banks, should
not be modified when a storm subsides.
Fixes: 7eae17c4add5 ("x86/mce: Add per-bank CMCI storm mitigation")
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251121190542.2447913-2-avadhut.naik@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Use UAPI types in ptrace UAPI header to fix nolibc ptrace.
Fix CPU name display, NUMA node parsing, kexec/kdump, PCI init and BPF
trampoline"
* tag 'loongarch-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: BPF: Disable trampoline for kernel module function trace
LoongArch: Don't panic if no valid cache info for PCI
LoongArch: Mask all interrupts during kexec/kdump
LoongArch: Fix NUMA node parsing with numa_memblks
LoongArch: Consolidate CPU names in /proc/cpuinfo
LoongArch: Use UAPI types in ptrace UAPI header
|
|
The generic CPU cache maintenance framework provides a way to register
drivers for devices implementing the underlying support for
cpu_cache_has_invalidate_memregion(). Enable it for arm64 by selecting
GENERIC_CPU_CACHE_MAINTENANCE which provides the implementation for,
and in turn selects, ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
In 3.7, 8250 was unintentionally renamed to 8250_core. This happened in
the commit 835d844d1a28 (8250_pnp: do pnp probe before legacy probe).
This made 8250.<xxxx> module options effectively defunct. Instead,
8250_core.<xxxx> worked.
In 3.9, the commit f2b8dfd9e480 (serial: 8250: Keep 8250.<xxxx> module
options functional after driver rename) made the original options work
again by introducing a hack.
Later in 3.9, the commit 9196d8acd7f9 (TTY: 8250, revert module name
change) changed the module name back to 8250 (from 8250_core). Since
then, the hack was there to support the transient 8250_core.<xxxx>
options. Those were present only in the 3.7..3.9 range.
These transient options were deprecated by 9326b047e4fd (TTY: 8250,
deprecated 8250_core.* options) in v3.9 too.
Now, after those 12 years, it is time to get rid of this hack
completely.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119092457.826789-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.19
Introduce support for the Redxa Dragon Q6A development board, the Huawei
MateBoot E 2019, the Asus ZenFone 2 Laser/Selfie, the MSM8937 platform
and the Xiaomo Redmi 3S device based on it.
SoC dtsi files for Agatti, Hamoa, Kodiak, Monaco, Purwa, and Talos, are
renamed in order to better facilitate the addition of new boards on the
various SKUs of these.
Cooling maps are introduced for the CPU cores in IPQ5424, and the
network subsystem clock controller is added.
On Lemans, RTC is enabled, the EVK fan controller is described and a
camera mezzanine overlay is introduced.
Touchscreen support is added to the BQ Aquaris M5, and the touchscreen
from Samsung Galaxy Core Prime is moved to the common platform to
benefit the other devices sharing common definitions.
On Agatti two more UARTs are described, as well as APR and the related audio
services, and the LPASS LPI pin controller. The RB1 board gets HDMI
autio playback support.
On Kodiak-based targets, Fairphone FP5 gains definitions of the UW camera
actuator, regulator for the ToF sensor, and haptic module. The SHIFT
SHIFTphone 8 gains RGB and flash LEDs, and Venus support. The Rb3Gen2
development board gets QUP firmware path defined, to support dynamic
loading of the serial engine firmware. Kodiak also gains Coresight
devices for AOSS and QDSS blocks.
Display support is added for the Talos platform, and enabled on the Ride
board. Talos also gains the definitions to scale DDR and L3
interconnects.
On SC8280XP, the camera privacy indicator on Lenovo Thinkpad X13s is
connected to the camera stack. Off-by-one GPI DMA channels are
corrected.
The SDM845-based LG and OnePlus custom defined rmtfs guard pages are
replaced with the inline-support for guard pages.
SDX75 DWC3 node is flattened and marked for USB role switching.
On SM8550, the camera subsystem and the S5K3M5 camera sensor is
introduced for the QRD, and an overlay for the "Rear Camera Card" for
the Hardware Development Kit (HDK) is introduced.
USB support is introduce for the SM8750 platform, and enabled in the MTP
and QRD devices.
On Hamoa, like on other devices the Asus Zenbook A14 definition of the
eDP panel is reworked to support both LCD and OLED configurations. WiFi
and Bluetooth is also enabled on the A14. The CRD gains support for
controlling charge limits.
The refgen regulator supplying DSI is defined and wired up on a variety
of platforms.
* tag 'qcom-arm64-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (138 commits)
arm64: dts: qcom: sdx75: Add missing usb-role-switch property
arm64: dts: qcom: sdx75: Flatten usb controller node
arm64: dts: qcom: HAMOA-IOT-SOM: Unreserve GPIOs blocking SPI11 access
arm64: dts: qcom: qrb2210-rb1: Fix UART3 wakeup IRQ storm
Revert "arm64: dts: qcom: sc7280: Increase config size to 256MB for ECAM feature"
arm64: dts: qcom: kodiak: add coresight nodes
arm64: dts: qcom: sdm845-oneplus: Describe TE gpio
arm64: dts: qcom: sdm845-oneplus: Implement panel sleep pinctrl
arm64: dts: qcom: sdm845-oneplus: Group panel pinctrl
arm64: dts: qcom: sdm845-oneplus: Update compatbible and add DDIC supplies
arm64: dts: qcom: qcs6490-rb3gen2: Rename vph-pwr regulator node
arm64: dts: qcom: qcm6490-fairphone-fp5: Add UW cam actuator
arm64: dts: qcom: qcm6490-fairphone-fp5: Enable CCI pull-up
arm64: dts: qcom: sm8750: Add USB support for SM8750 QRD platform
arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform
arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs
arm64: dts: qcom: rename x1p42100 to purwa
arm64: dts: qcom: rename sc7280 to kodiak
arm64: dts: qcom: rename qcm2290 to agatti
arm64: dts: qcom: add gpu_zap_shader label
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.19
In addition to a variety of cleanups and reordering of nodes, four GSBIs
are added to the MSM8960 platform.
On the MSM8226-based Samsung Galaxy Grand 2, a simple framebuffer is
defined.
* tag 'qcom-arm32-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: msm8226-samsung-ms013g: add simple-framebuffer
ARM: dts: qcom: msm8960: rename msmgpio node to tlmm
ARM: dts: qcom: msm8960: add I2C nodes for gsbi1 and gsbi8
ARM: dts: qcom: msm8960: add I2C nodes for gsbi10 and gsbi12
ARM: dts: qcom: msm8960: inline qcom-msm8960-pins.dtsi
ARM: dts: qcom: msm8960: reorder nodes and properties
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt
Misc. DT updates, mostly for AM3 platforms.
* tag 'omap-for-v6.19/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: dts: ti/omap: fix incorrect compatible string in internal eeprom node
ARM: dts: omap: am335x-mba335x: Fix stray '/*' in comment
ARM: dts: omap: am335x-tqma335x/mba335x: Fix MicIn routing
dt-bindings: mmc: ti,omap2430-sdhci: convert to DT schema
arm: dts: ti: omap: Drop unnecessary properties for SDHCI node
arm: dts: ti: omap: am335x-pepper: Fix vmmc-supply property typo
ARM: dts: omap3: n900: Correct obsolete TWL4030 power compatible
ARM: dts: omap3: beagle-xm: Correct obsolete TWL4030 power compatible
ARM: dts: omap: Add support for TQMa335x/MBa335x
ARM: dts: omap: AM33xx: add cpu label
dt-bindings: omap: add AM335x-based TQMa335x SOM and MBa335x board
ARM: dts: am335x-netcom-plus-2xx: add missing GPIO labels
ARM: dts: ti: omap: am335x-baltos: add a regulator for the mPCIe slot
ARM: dts: omap: rework Baltos LED nodes
ARM: dts: am33xx: Add missing serial console speed
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.19
This update includes:
- FIFO size fixes for some Flexcom UARTs and SPIs
* tag 'at91-dt-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama5d2: fix spi flexcom fifo size to 32
ARM: dts: microchip: sama7g5: fix uart fifo size to 32
ARM: dts: microchip: sama7d65: fix uart fifo size to 32
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.19
Generic fixes and cleanups:
* Multiple SoCs: Disable CPSW in SoC files and
enable them in board files for better board-level control
* Replace rgmii-rxid with rgmii-id for CPSW ports across multiple boards
New Boards/SoM:
* AM62L SoC and basic support for EVM
* Toradex Aquila AM69 board support
* Kontron SMARC-sAM67 module and ADS2 carrier board support
Platform wide:
* Define possible system states amd wakeup-source (AM62/AM62A/AM62P)
SoC/EVM specific changes:
AM62:
* Add RNG node
* Add OLDI support
AM62P:
* Move audio_refclk to common main dtsi (k3-am62p-j722s-common-main)
* Fix memory ranges for GPU
AM62D2:
* Enable PMIC support on EVM
* Misc fixes
AM64:
* Add DMA support for TSCADC on EVM
AM69:
* Add Aquila board support with Clover variant
J722S:
* Fix audio refclk source in main dtsi
* Explicitly use PLL1_HSDIV6 audio refclk for EVM
J784S4/J742S2:
* Add bootph-all tag to support PCIe boot
Variscite VAR-SOM-AM62P:
* Add support for ADS7846 touchscreen
* Add support for WM8904 audio codec
* tag 'ti-k3-dt-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (42 commits)
arm64: dts: ti: k3-am62l: add initial reference board file
arm64: dts: ti: k3-am62l: add initial infrastructure
dt-bindings: arm: ti: Add binding for AM62L SoCs
arm64: dts: ti: am69-aquila: Add Clover
arm64: dts: ti: Add Aquila AM69 Support
dt-bindings: arm: ti: add Toradex Aquila AM69
arm64: dts: ti: k3-j721s2: disable "mcu_cpsw" in SoC file and enable in board files
arm64: dts: ti: k3-j721e: disable "mcu_cpsw" in SoC file and enable it in board file
arm64: dts: ti: k3-j7200: disable "mcu_cpsw" in SoC file and enable in board file
arm64: dts: ti: k3-am65: disable "mcu_cpsw" in SoC file and enable in board file
arm64: dts: ti: k3-am62: disable "cpsw3g" in SoC file and enable in board file
arm64: dts: ti: k3-am62p5-sk: Set wakeup-source system-states
arm64: dts: ti: k3-am62a7-sk: Set wakeup-source system-states
arm64: dts: ti: k3-am62-lp-sk: Set wakeup-source system-states
arm64: dts: ti: k3-am62p: Define possible system states
arm64: dts: ti: k3-am62a: Define possible system states
arm64: dts: ti: k3-am62: Define possible system states
arm64: dts: ti: k3-am62p-j722s-common-main: move audio_refclk here
arm64: dts: ti: k3-*: Replace rgmii-rxid with rgmii-id for CPSW ports
arm64: dts: ti: k3-am642-tqma64xxl: add boot phase tags
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v6.19
- Add 4-bit SPI bus width(n5x, stratix10, agilex and agilex5)
- Agilex5 updates:
- Add GMAC0 for NAND daughter card
- Add SMMU support
- Add VGIC maintenance interrupt
- Add L2 and L3 cache
- Add support for the 013b board
- Add I3C support
- Add support for the Enclustra Mercury+ SA1 SoM based on Cyclone5
- Add support for Agilex3 board(a variant of the Agilex5 board)
- dt-bindings update:
- Document iommu in cdns,hp-nfc, snps,dw-axi-dmac and Agilex5
- Document Enclustra Mercury SA1 and AA1 boards
- Document Agilex5 013b board
- Document Agilex3 board
- Fix dtbs_check warnings:
- stratix10-swvp
- Agilex(NAND and Clock manager)
- Move sdmmc-ecc to base DTSI file(Stratix10)
* tag 'socfpga_dts_updates_for_v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (35 commits)
arm64: dts: socfpga: agilex5: update qspi partitions for 013b board
arm64: dts: socfpga: add Agilex3 board
dt-bindings: intel: Add Agilex3 SoCFPGA board
arm64: dts: intel: agilex5: Add Altera compatible for I3C controllers
arm64: dts: socfpga: Add Agilex5 SVC node with memory region
dt-bindings: firmware: svc: Add IOMMU support for Agilex5
arm64: dts: socfpga: agilex5: Add SMMU-V3-PMCG nodes
arm64: dts: socfpga: agilex5: Add L2 and L3 cache
arm64: dts: socfpga: agilex5: fix CHECK_DTBS warning for NAND
arm64: dts: socfpga: agilex5: add support for 013b board
dt-bindings: intel: Add Agilex5 SoCFPGA 013b board
arm64: dts: socfpga: agilex5: add VGIC maintenance interrupt
arm64: dts: socfpga: agilex: fix dtbs_check warning for NAND
arm64: dts: socfpga: agilex: fix dtbs_check warning for clock manager
arm64: dts: socfpga: stratix10-swvp: fix dtbs_check warnings swvp
arm64: dts: socfpga: move sdmmc-ecc to the base DTSI file
ARM: dts: socfpga: add Enclustra SoM dts files
dt-bindings: altera: removal of generic PE1 dts
ARM: dts: socfpga: removal of generic PE1 dts
dt-bindings: altera: add Mercury AA1 variants
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.19:
- New board support: Protonic PRT8ML, Toradex SMARC iMX95, Skov Rev.C
HDMI, i.MX 95 Verdin Evaluation KitPHYTEC phyBOARD-Segin-i.MX91 board,
Skov i.MX8MP variant
- A series from Alexander Stein to clean up and improve imx95-tqma9596sa
board support
- Add MicIn routing support for mba8mx boards
- A couple of patch sets from Frank Li to clean up dt-schema warnings
and add more device support for imx8dxl and imx8qxp boards
- A series from Ioana Ciornei to add FPGA based GPIO controller and SFP+
cages for layerscape boards
- A change from Jan Petrous to add GMAC Ethernet for S32G2 EVB, RDB2 and
S32G3 RDB3 boards
- A series from Markus Niebel to improve imx95-tqma9596sa board support
- A couple of changes from Martin Kepplinger-Novaković to enable cpuidle
cooling device support for imx8mp
- A series from Max Krummenacher to clean up todo and add thermal
support for imx8-apalis board
- A series from Primoz Fiser to add USB vbus regulators, jtag and
pwm-fan overlay for imx93-phyboard
- A couple of series from Richard Zhu to add supports-clkreq property
and vpcie3v3aux regulator for PCIe M.2 device
- A series from Stefano Radaelli to add WiFi, BT, PMIC, WM8904 audio,
and ADS7846 touchscreen support for imx93-var-som
- A series from Tim Harvey to make some cleanups for imx8mm-venice
boards
- A change from Xu Yang to add DDR Perf Monitor support for i.MX94
- Other small and random changes
* tag 'imx-dt64-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (122 commits)
arm64: dts: freescale: add Toradex SMARC iMX95
arm64: dts: freescale: tqma9352: Add vcc-supply for spi-nor
arm64: dts: mb-smarc-2: Add MicIn routing
arm64: dts: mba8xx: Add MicIn routing
arm64: dts: mba8mx: Add MicIn routing
arm64: dts: imx8mp: make 'dsp' node depend on 'aips5'
arm64: dts: imx8mp: convert 'aips5' to 'aipstz5'
arm64: dts: imx8mp-skov: add Rev.C HDMI support
arm64: dts: imx8mp: Add missing LED enumerators for DH electronics i.MX8M Plus DHCOM on PDK2
arm64: dts: freescale: Add GMAC Ethernet for S32G2 EVB and RDB2 and S32G3 RDB3
arm64: dts: imx8qm-apalis: add pwm used by the backlight
arm64: dts: imx95-tqma9596sa-mb-smarc-2: add aliases for SPI
arm64: dts: imx95-tqma9596sa-mb-smarc-2: remove superfluous line
arm64: dts: imx95-tqma9596sa-mb-smarc-2: mark LPUART1 as reserved
arm64: dts: imx95-tqma9596sa-mb-smarc-2: Add MicIn routing
arm64: dts: imx95-tqma9596sa: add EEPROM pagesize
arm64: dts: imx95-tqma9596sa: whitespace fixes
arm64: dts: imx95-tqma9596sa: add gpio bus recovery for i2c
arm64: dts: imx95-tqma9596sa: remove superfluous pinmux for usdhci
arm64: dts: imx95-tqma9596sa: remove superfluous pinmux for i2c
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.19:
- A bunch of dt-schema warning cleanup patches from Frank Li
- A couple of imx6dl-yapp4 board update from Michal Vokáč to enable
pwm-beeper and model the RGB LED as a single multi-led part
- Enable PMIC RTC on imx53-qsrb board
- Correct rtc compatible for imx6q-evi board
- Add sy7636 support for e70k02 board
- Replace license text comment with SPDX identifier for imx53-usbarmory
board
- Add I2S audio support for imx28-amarula-rmm board
* tag 'imx-dt-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (29 commits)
ARM: dts: imx6qdl: make VAR-SOM SoM SoC-agnostic
ARM: dts: imx6dl-yapp4: Model the RGB LED as a single multi-led part
ARM: dts: imx6dl-yapp43: Enable pwm-beeper on boards with speaker
ARM: dts: imx: e70k02: add sy7636
ARM: dts: imx28-amarula-rmm: add I2S audio
ARM: dts: imx: add vdd-supply and vddio-supply for fsl,mpl3115
ARM: dts: imx7ulp: remove bias-pull-up
ARM: dts: remove undocumented clock-names for ov5642
ARM: dts: add device_type for memory node
ARM: dts: Add bus type for parallel ov5640
ARM: dts: imx6q-cm-fx6.dts: add supplies for wm8731
ARM: dts: imx6qdl-skov-cpu fix typo interrupt
ARM: dts: imx: remove redundant linux,phandle
ARM: dts: imx6ull-dhcom-pdk2: rename power-supply to vcc-supply for touchscreen
ARM: dts: imx: add power-supply for lcd panel
ARM: dts: imx6qdl-nitrogen6_max: rename i2c<n>mux to i2c
ARM: dts: imx6ull-phytec-tauri: remove extra space before jedec,spi-nor
ARM: dts: imx6q-utilite-pro: add missing required property for pci
ARM: dts: imx6-tbs2910: rename ir_recv to ir-receiver
ARM: dts: imx6: remove pinctrl-name if pinctrl-0 doesn't exist
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner device tree changes for 6.19
The A523 family gains support for I2S and SPDIF audio interfaces, as
well as the GMAC200 Ethernet controller.
The H616 gains support for the NAND controller.
* tag 'sunxi-dt-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a523: Add SPDIF TX pin on PB and PI pins
arm64: dts: allwinner: a523: Add I2S2 pins on PI pin group
arm64: dts: allwinner: a523: Add device nodes for I2S controllers
arm64: dts: allwinner: a523: Add device node for SPDIF block
arm64: dts: allwinner: a523: Add DMA controller device nodes
dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatibles for A523
arm64: dts: allwinner: h616: add NAND controller
arm64: dts: allwinner: t527: orangepi-4a: Enable Ethernet port
arm64: dts: allwinner: t527: avaota-a1: enable second Ethernet port
arm64: dts: allwinner: a527: cubie-a5e: Enable second Ethernet port
arm64: dts: allwinner: a523: Add GMAC200 ethernet controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.19-rc1
This contains a bunch of additions and improvements for older devices.
Tegra210 devices now have empty reserved-memory nodes to improve inter-
operability with certain bootloaders. These chips now also support more
multimedia engines. A new variant of the Jetson Nano is also added.
Jetson TX2 sees some improvements. PCI endpoint mode is improved for
Tegra234 so that reset interrupts are properly routed.
A new RTC device is added starting with Orin.
Rounding things off is a flurry of small fixes for DT validation and USB
OTG mode.
* tag 'tegra-for-6.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (25 commits)
arm64: tegra: Remove OTG ID GPIO from Jetson TX2 NX
arm64: tegra: Set USB Micro-B port to OTG mode on P3450
arm64: tegra: Add NVJPG node for Tegra210 platforms
arm64: tegra: Add Tegra210 NVJPG power-domain node
arm64: tegra: Add interrupts for Tegra234 USB wake events
arm64: tegra: Add reserved-memory node for P2180
arm64: tegra: Add reserved-memory node for P3450
arm64: tegra: Enable NVDEC and NVENC on Tegra210
arm64: tegra: Fix APB DMA controller node name
arm64: tegra: Add default GIC address cells on Tegra210
arm64: tegra: Add default GIC address cells on Tegra194
arm64: tegra: Add default GIC address cells on Tegra186
arm64: tegra: Add default GIC address cells on Tegra132
arm64: tegra: Add OPP tables on Tegra210
arm64: tegra: Add interconnect properties for Tegra210
arm64: tegra: Add ACTMON on Tegra210
arm64: tegra: Add device-tree node for NVVRS RTC
arm64: tegra: Move avdd-dsi-csi-supply into CSI node
arm64: tegra: Drop redundant clock and reset names from TSEC node
arm64: tegra: Move HDA into the correct bus
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.19-rc1
Add more host1x devices on Tegra114 and Tegra124, as well as CSI for
Tegra20 and Tegra30. Support for the Xiaomi Mi Pad is also added.
* tag 'tegra-for-6.19-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Add device-tree for Xiaomi Mi Pad (A0101)
ARM: tegra: add CSI nodes for Tegra20 and Tegra30
ARM: tegra: Add missing HOST1X device nodes on Tegra124
ARM: tegra: Add missing HOST1X device nodes on Tegra114
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.19 (take two)
- Add Imagination Technologies PowerVR Series 7XE GE7800 GPU support
for the R-Car M3-N and V3U SoCs,
- Add Ethernet support for the RZ/T2H and RZ/N2H SoCs and their
evaluation boards,
- Add ADC support for the RZ/N1D SoC,
- Add thermal, NMI pushbutton, and RTC support for the RZ/V2H SoC and
the RZ/V2H EVK development board,
- Add USB2.0 support for the RZ/G3S SoC and the RZ/G3S SMARC Carrier
II board.
* tag 'renesas-dts-for-v6.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzt2h-n2h-evk: Enable Ethernet support
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable RTC
arm64: dts: renesas: r9a09g057: Add RTC node
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Add NMI pushbutton support
arm64: dts: renesas: rzg3s-smarc: Enable USB support
arm64: dts: renesas: r9a08g045: Add USB support
arm64: dts: renesas: r9a09g057: Add TSU nodes
ARM: dts: renesas: r9a06g032: Add the ADC device
arm64: dts: renesas: r9a09g087: Add GMAC nodes
arm64: dts: renesas: r9a09g077: Add GMAC nodes
arm64: dts: renesas: r9a09g087: Add ETHSS node
arm64: dts: renesas: r9a09g077: Add ETHSS node
arm64: dts: renesas: r8a779a0: Add GE7800 GPU node
arm64: dts: renesas: r8a77965: Add GE7800 GPU node
dt-bindings: clock: r8a779a0: Add ZG core clock
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
RISC-V SpacemiT DT changes for 6.19
- Add Uart and I2C nodes
- Add P1 PMIC nodes
- Add MusePi Pro board support
- Add OrangePi R2S board support
- Enable eeprom for BPI-F3
- Enable QSPI on BPI-F3
- Enable Ethernet and PDMA on OrangePi RV2
* tag 'spacemit-dt-for-6.19-1' of https://github.com/spacemit-com/linux:
riscv: dts: spacemit: define all missing I2C controller nodes
riscv: dts: spacemit: reorder i2c2 node
riscv: dts: spacemit: Add OrangePi R2S board device tree
dt-bindings: riscv: spacemit: Add OrangePi R2S board
riscv: dts: spacemit: enable K1 SoC QSPI on BPI-F3
riscv: dts: spacemit: add MusePi Pro board device tree
dt-bindings: riscv: spacemit: add MusePi Pro board
riscv: dts: spacemit: add Ethernet and PDMA to OrangePi RV2
riscv: dts: spacemit: add i2c aliases on BPI-F3
riscv: dts: spacemit: add 24c02 eeprom on BPI-F3
riscv: dts: spacemit: enable the i2c2 adapter on BPI-F3
riscv: dts: spacemit: define regulator constraints
riscv: dts: spacemit: define fixed regulators
riscv: dts: spacemit: enable the i2c8 adapter
riscv: dts: spacemit: add UART pinctrl combinations
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 Device Tree updates
This adds support for new boards and variants based on different
already supported MediaTek SoCs, and improves support for current
boards.
In particular:
- New machines:
- MT7988 BananaPi R4 Pro eMMC and SD router board with support
for both Key-M and Key-E M.2 slots through DTB Overlays
- MT8370 Grinn GenioSBC-510 (GenioSOM-510 + GenioBoard Edge AI)
- MT8390 Grinn GenioSBC-700 (GenioSOM-700 + GenioBoard Edge AI)
- New variant: MT8395 MediaTek Genio 1200 EVK with UFS
...preparation for new SoCs (MT8196 Kompanio Ultra, a clone of the
MT6991 Dimensity 9400, and MT6878 Dimensity 7300) with the
addition of GCE/PIO definitions
...improvements for already supported SoCs and machines:
- MT7622/7981b/7986a/7988a gain support for reading SoC UUID from
eFuse, used to generate a persistent MAC address on boards that
don't have any factory-assigned addresses.
- MT7986 BananaPi R3 gets changes to its default fan PWM speed to
improve compatibility with cheaper fans (usually coming with the
heatsink+fan combos)
- The MT7981b OpenWRT One router sees general support improvements
with the enablement of its UART-0 console and correct pinmuxing
for the same, addition of reserved memory for Trusted Firmware A,
its SPI NOR Flash (for recovery system, WiFi eeprom data and ETH
MAC address from factory), and board LEDs.
- MT8365 gets support for its Mali G52 MC1 GPU, which gets enabled
in the MediaTek Genio 350 EVK board
...and a dt-bindings warning fix for MT8183 machines through trivial
changes to rename the audiosys and afe nodes to reflect bindings.
* tag 'mtk-dts64-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (27 commits)
arm64: dts: mediatek: mt7981b-openwrt-one: Enable software leds
arm64: dts: mediatek: mt7981b-openwrt-one: Enable SPI NOR
arm64: dts: mediatek: mt7988a-bpi-r4pro: Add mmc overlays
arm64: dts: mediatek: mt7988a-bpi-r4-pro: Add PCIe overlays
arm64: dts: mediatek: mt7988: Add devicetree for BananaPi R4 Pro
arm64: dts: mediatek: mt7988: Disable 2.5G phy and enable at board layer
dt-bindings: arm: mediatek: add BPI-R4 Pro board
arm64: dts: mediatek: Add GCE header for MT8196
arm64: dts: mediatek: mt7981b: Add reserved memory for TF-A
arm64: dts: mediatek: mt7981b: Configure UART0 pinmux
arm64: dts: mediatek: mt8365-evk: Enable GPU support
arm64: dts: mediatek: mt8365: Add GPU support
arm64: dts: mediatek: mt8395-genio-1200-evk: Describe CPU supplies
arm64: dts: mediatek: Add MT6878 pinmux macro header file
arm64: dts: mediatek: mt7986-bpi-r3: Change fan PWM value for mid speed
arm64: dts: mediatek: mt8370-grinn-genio-510-sbc: Add Grinn GenioSBC-510
arm64: dts: mediatek: mt8390-genio-700-evk: Add Grinn GenioSBC-700
arm64: dts: mediatek: mt7988a: add 'soc-uuid' cell to efuse
arm64: dts: mediatek: mt7981b: add 'soc-uuid' cell to efuse
arm64: dts: mediatek: mt7986a: add 'soc-uuid' cell to efuse
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM32 Device Tree updates
This performs a cleanup of the MT6582 devicetrees and adds support
for secondary cores bringup on this SoC.
This also introduces basic support for a new machine, the MT6582
Alcatel "yarisxl" Pop C7 (OT-7041D) smartphone, with support for
booting into a initramfs with UART console output.
* tag 'mtk-dts32-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
ARM: dts: mediatek: drop wrong syscon hifsys compatible for MT2701/7623
ARM: dts: mediatek: add basic support for Alcatel yarisxl board
dt-bindings: arm: mediatek: Add MT6582 yarisxl
ARM: dts: mediatek: mt6582: add enable-method property to cpus
ARM: dts: mediatek: mt6582: add clock-names property to uart nodes
ARM: dts: mediatek: mt6582: add mt6582 compatible to timer
ARM: dts: mediatek: mt6582: remove compatible property from root node
ARM: dts: mediatek: mt6582: sort nodes and properties
ARM: dts: mediatek: mt6582: move MMIO devices under soc node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.19
1. ExynosAutov920:
- Add more clock controller nodes.
2. Google GS101:
- PMIC clock
- Mark ACPM (Alive Clock and Power Manager) firmware node as clock
provider and use its clocks. Add also Devicetree binding headers
with clock its clock indices used in DTS (kept as separate branch).
- Add more SYSREG (syscon) regions.
- Correct several blocks address space sizes and APM SYSREG's starting
address.
3. Exynos7870:
- Enable display over DSI and several display planels.
- Few cleanups.
* tag 'samsung-dt64-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos7870-j6lte: enable display panel support
arm64: dts: exynos7870-a2corelte: enable display panel support
arm64: dts: exynos7870-on7xelte: enable display panel support
arm64: dts: exynos7870: add DSI support
arm64: dts: exynos: gs101: fix sysreg_apm reg property
arm64: dts: exynos: gs101: fix clock module unit reg sizes
arm64: dts: exynos: gs101: add sysreg_misc and sysreg_hsi0 nodes
arm64: dts: exynos: gs101: add OPPs
arm64: dts: exynos: gs101: add CPU clocks
arm64: dts: exynos: gs101: add #clock-cells to the ACPM protocol node
dt-bindings: firmware: google,gs101-acpm-ipc: add ACPM clocks
arm64: dts: exynos: gs101-pixel-common: add node for s2mpg10 / clock
arm64: dts: exynos990: Add sysreg nodes for PERIC0 and PERIC1
arm64: dts: exynosautov920: add CMU_MFC clock DT nodes
arm64: dts: exynosautov920: add CMU_M2M clock DT nodes
arm64: dts: exynos7870-on7xelte: add bus-width to mmc0 node
arm64: dts: exynos7870-j6lte: add bus-width to mmc0 node
arm64: dts: exynos7870-a2corelte: add bus-width to mmc0 node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux into soc/dt
T-HEAD Devicetrees for v6.19
Add PWM controlled fan and it's associated thermal management for the
Lichee Pi 4A board.
Enable additional ISA extenstions supported by the T-Head C910 cores:
Zfh, Ziccrse, XTheadvector.
Add reset controllers of more TH1520 subsystems: AP, AO, DSP, MISC, VI.
Signed-off-by: Drew Fustini <fustini@kernel.org>
* tag 'thead-dt-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux:
riscv: dts: thead: Add reset controllers of more subsystems for TH1520
riscv: dts: thead: Add PWM fan and thermal control
riscv: dts: thead: Add PWM controller node
riscv: dts: thead: add zfh for th1520
riscv: dts: thead: add ziccrse for th1520
riscv: dts: thead: add xtheadvector to the th1520 devicetree
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
