| Age | Commit message (Collapse) | Author |
|---|
|
Leave SEV and SEV_ES '0' in kvm_cpu_caps by default, and instead set them
in sev_set_cpu_caps() if SEV and SEV-ES support are fully enabled. Aside
from the fact that sev_set_cpu_caps() is wildly misleading when it *clears*
capabilities, this will allow compiling out sev.c without falsely
advertising SEV/SEV-ES support in KVM_GET_SUPPORTED_CPUID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
On AMD and Hygon platforms, the local APIC does not automatically set
the mask bit of the LVTPC register when handling a PMI and there is
no need to clear it in the kernel's PMI handler.
For guests, the mask bit is currently set by kvm_apic_local_deliver()
and unless it is cleared by the guest kernel's PMI handler, PMIs stop
arriving and break use-cases like sampling with perf record.
This does not affect non-PerfMonV2 guests because PMIs are handled in
the guest kernel by x86_pmu_handle_irq() which always clears the LVTPC
mask bit irrespective of the vendor.
Before:
$ perf record -e cycles:u true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (1 samples) ]
After:
$ perf record -e cycles:u true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (19 samples) ]
Fixes: a16eb25b09c0 ("KVM: x86: Mask LVTPC when handling a PMI")
Cc: stable@vger.kernel.org
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
[sean: use is_intel_compatible instead of !is_amd_or_hygon()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240405235603.1173076-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add kvm_vcpu_arch.is_amd_compatible to cache if a vCPU's vendor model is
compatible with AMD, i.e. if the vCPU vendor is AMD or Hygon, along with
helpers to check if a vCPU is compatible AMD vs. Intel. To handle Intel
vs. AMD behavior related to masking the LVTPC entry, KVM will need to
check for vendor compatibility on every PMI injection, i.e. querying for
AMD will soon be a moderately hot path.
Note! This subtly (or maybe not-so-subtly) makes "Intel compatible" KVM's
default behavior, both if userspace omits (or never sets) CPUID 0x0 and if
userspace sets a completely unknown vendor. One could argue that KVM
should treat such vCPUs as not being compatible with Intel *or* AMD, but
that would add useless complexity to KVM.
KVM needs to do *something* in the face of vendor specific behavior, and
so unless KVM conjured up a magic third option, choosing to treat unknown
vendors as neither Intel nor AMD means that checks on AMD compatibility
would yield Intel behavior, and checks for Intel compatibility would yield
AMD behavior. And that's far worse as it would effectively yield random
behavior depending on whether KVM checked for AMD vs. Intel vs. !AMD vs.
!Intel. And practically speaking, all x86 CPUs follow either Intel or AMD
architecture, i.e. "supporting" an unknown third architecture adds no
value.
Deliberately don't convert any of the existing guest_cpuid_is_intel()
checks, as the Intel side of things is messier due to some flows explicitly
checking for exactly vendor==Intel, versus some flows assuming anything
that isn't "AMD compatible" gets Intel behavior. The Intel code will be
cleaned up in the future.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240405235603.1173076-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Deduplicate ->read() callbacks of bin_attributes which are backed by a
simple buffer in memory:
Use the newly introduced sysfs_bin_attr_simple_read() helper instead,
either by referencing it directly or by declaring such bin_attributes
with BIN_ATTR_SIMPLE_RO() or BIN_ATTR_SIMPLE_ADMIN_RO().
Aside from a reduction of LoC, this shaves off a few bytes from vmlinux
(304 bytes on an x86_64 allyesconfig).
No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Zhi Wang <zhiwang@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/92ee0a0e83a5a3f3474845db6c8575297698933a.1712410202.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The early 64-bit boot code must be entered with a 1:1 mapping of the
bootable image, but it cannot operate without a 1:1 mapping of all the
assets in memory that it accesses, and therefore, it creates such
mappings for all known assets upfront, and additional ones on demand
when a page fault happens on a memory address.
These mappings are created with the global bit G set, as the flags used
to create page table descriptors are based on __PAGE_KERNEL_LARGE_EXEC
defined by the core kernel, even though the context where these mappings
are used is very different.
This means that the TLB maintenance carried out by the decompressor is
not sufficient if it is entered with CR4.PGE enabled, which has been
observed to happen with the stage0 bootloader of project Oak. While this
is a dubious practice if no global mappings are being used to begin
with, the decompressor is clearly at fault here for creating global
mappings and not performing the appropriate TLB maintenance.
Since commit:
f97b67a773cd84b ("x86/decompressor: Only call the trampoline when changing paging levels")
CR4 is no longer modified by the decompressor if no change in the number
of paging levels is needed. Before that, CR4 would always be set to a
consistent value with PGE cleared.
So let's reinstate a simplified version of the original logic to put CR4
into a known state, and preserve the PAE, MCE and LA57 bits, none of
which can be modified freely at this point (PAE and LA57 cannot be
changed while running in long mode, and MCE cannot be cleared when
running under some hypervisors).
This effectively clears PGE and works around the project Oak bug.
Fixes: f97b67a773cd84b ("x86/decompressor: Only call the trampoline when ...")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20240410151354.506098-2-ardb+git@google.com
|
|
changes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
MAX_TLBI_RANGE_PAGES pages is covered by SCALE#3 and NUM#31 and it's
supported now. Allow TLBI RANGE operation when the number of pages is
equal to MAX_TLBI_RANGE_PAGES in __flush_tlb_range_nosync().
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20240405035852.1532010-4-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The macro returns the operand of TLBI RANGE instruction. A mask needs
to be applied to each individual field upon producing the operand, to
avoid the adjacent fields can interfere with each other when invalid
arguments have been provided. The code looks more tidy at least with
a mask and FIELD_PREP().
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20240405035852.1532010-3-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add i2c devices for the CV180x, CV181x and SG200x soc.
Link: https://lore.kernel.org/r/IA1PR20MB49531AA2DBD4832B7926D4A8BB442@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Add spi devices for the CV180x, CV181x and SG200x soc.
Link: https://lore.kernel.org/r/IA1PR20MB49532705DE532BCF81CCEFD0BB442@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
While syscall hardening helps prevent some BHI attacks, there's still
other low-hanging fruit remaining. Don't classify it as a mitigation
and make it clear that the system may still be vulnerable if it doesn't
have a HW or SW mitigation enabled.
Fixes: ec9404e40e8f ("x86/bhi: Add BHI mitigation knob")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/b5951dae3fdee7f1520d5136a27be3bdfe95f88b.1712813475.git.jpoimboe@kernel.org
|
|
The ARCH_CAP_RRSBA check isn't correct: RRSBA may have already been
disabled by the Spectre v2 mitigation (or can otherwise be disabled by
the BHI mitigation itself if needed). In that case retpolines are fine.
Fixes: ec9404e40e8f ("x86/bhi: Add BHI mitigation knob")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/6f56f13da34a0834b69163467449be7f58f253dc.1712813475.git.jpoimboe@kernel.org
|
|
So we are using the 'ia32_cap' value in a number of places,
which got its name from MSR_IA32_ARCH_CAPABILITIES MSR register.
But there's very little 'IA32' about it - this isn't 32-bit only
code, nor does it originate from there, it's just a historic
quirk that many Intel MSR names are prefixed with IA32_.
This is already clear from the helper method around the MSR:
x86_read_arch_cap_msr(), which doesn't have the IA32 prefix.
So rename 'ia32_cap' to 'x86_arch_cap_msr' to be consistent with
its role and with the naming of the helper function.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Nikolay Borisov <nik.borisov@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/9592a18a814368e75f8f4b9d74d3883aa4fd1eaf.1712813475.git.jpoimboe@kernel.org
|
|
There's no need to keep reading MSR_IA32_ARCH_CAPABILITIES over and
over. It's even read in the BHI sysfs function which is a big no-no.
Just read it once and cache it.
Fixes: ec9404e40e8f ("x86/bhi: Add BHI mitigation knob")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/9592a18a814368e75f8f4b9d74d3883aa4fd1eaf.1712813475.git.jpoimboe@kernel.org
|
|
Add missing clocks of uart node for CV1800B and CV1812H.
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/IA1PR20MB4953198222C3ABC2A2B6DE21BB262@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Add clock generator node for CV1800B and CV1812H.
Until now, It uses DT override to minimize duplication. This may
change in the future. See the last link for the discussion on
maintaining DT of CV1800 series.
Link: https://github.com/milkv-duo/duo-files/blob/6f4e9b8ecb459e017cca1a8df248a19ca70837a3/duo/datasheet/CV1800B-CV1801B-Preliminary-Datasheet-full-en.pdf
Link: https://lore.kernel.org/all/IA1PR20MB495373158F3B690EF3BF2901BB8BA@IA1PR20MB4953.namprd20.prod.outlook.com/
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/IA1PR20MB4953ED6A4B57773865F49D6DBB262@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
KVM/arm64 relies on TLBI RANGE feature to flush TLBs when the dirty
pages are collected by VMM and the page table entries become write
protected during live migration. Unfortunately, the operand passed
to the TLBI RANGE instruction isn't correctly sorted out due to the
commit 117940aa6e5f ("KVM: arm64: Define kvm_tlb_flush_vmid_range()").
It leads to crash on the destination VM after live migration because
TLBs aren't flushed completely and some of the dirty pages are missed.
For example, I have a VM where 8GB memory is assigned, starting from
0x40000000 (1GB). Note that the host has 4KB as the base page size.
In the middile of migration, kvm_tlb_flush_vmid_range() is executed
to flush TLBs. It passes MAX_TLBI_RANGE_PAGES as the argument to
__kvm_tlb_flush_vmid_range() and __flush_s2_tlb_range_op(). SCALE#3
and NUM#31, corresponding to MAX_TLBI_RANGE_PAGES, isn't supported
by __TLBI_RANGE_NUM(). In this specific case, -1 has been returned
from __TLBI_RANGE_NUM() for SCALE#3/2/1/0 and rejected by the loop
in the __flush_tlb_range_op() until the variable @scale underflows
and becomes -9, 0xffff708000040000 is set as the operand. The operand
is wrong since it's sorted out by __TLBI_VADDR_RANGE() according to
invalid @scale and @num.
Fix it by extending __TLBI_RANGE_NUM() to support the combination of
SCALE#3 and NUM#31. With the changes, [-1 31] instead of [-1 30] can
be returned from the macro, meaning the TLBs for 0x200000 pages in the
above example can be flushed in one shoot with SCALE#3 and NUM#31. The
macro TLBI_RANGE_MASK is dropped since no one uses it any more. The
comments are also adjusted accordingly.
Fixes: 117940aa6e5f ("KVM: arm64: Define kvm_tlb_flush_vmid_range()")
Cc: stable@kernel.org # v6.6+
Reported-by: Yihuang Yu <yihyu@redhat.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20240405035852.1532010-2-gshan@redhat.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Since commit 20af807d806d ("arm64: Avoid cpus_have_const_cap() for
ARM64_HAS_GIC_PRIO_MASKING"), the alternative.h include is not used,
so remove it.
Fixes: 20af807d806d ("arm64: Avoid cpus_have_const_cap() for ARM64_HAS_GIC_PRIO_MASKING")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240314063819.2636445-1-ruanjinjie@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
topo_set_cpuids() updates cpu_present_map and cpu_possible map. It is
invoked during enumeration and "physical hotplug" operations. In the
latter case this results in a kernel crash because cpu_possible_map is
marked read only after init completes.
There is no reason to update cpu_possible_map in that function. During
enumeration cpu_possible_map is not relevant and gets fully initialized
after enumeration completed. On "physical hotplug" the bit is already set
because the kernel allows only CPUs to be plugged which have been
enumerated and associated to a CPU number during early boot.
Remove the bogus update of cpu_possible_map.
Fixes: 0e53e7b656cf ("x86/cpu/topology: Sanitize the APIC admission logic")
Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87ttkc6kwx.ffs@tglx
|
|
LoongArch's include/asm/addrspace.h uses SZ_32M and SZ_16K, so add
<linux/sizes.h> to provide those macros to prevent build errors:
In file included from ../arch/loongarch/include/asm/io.h:11,
from ../include/linux/io.h:13,
from ../include/linux/io-64-nonatomic-lo-hi.h:5,
from ../drivers/cxl/pci.c:4:
../include/asm-generic/io.h: In function 'ioport_map':
../arch/loongarch/include/asm/addrspace.h:124:25: error: 'SZ_32M' undeclared (first use in this function); did you mean 'PS_32M'?
124 | #define PCI_IOSIZE SZ_32M
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Current dts file for Loongson-2K2000's GMAC/GNET is incomplete, both irq
and phy descriptions are missing. Add them to make GMAC/GNET work.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Current dts file for Loongson-2K2000 misses the interrupt-controller &
interrupt-cells descriptions in the msi-controller node, and misses the
msi-parent link in the pci root node. Add them to support PCI-MSI.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some Loongson-2K2000 platforms have ISA/LPC devices such as Super-IO,
define an ISA node in the dts file to avoid access error. Also adjust
the PCI io resource range to avoid confliction.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some Loongson-2K1000 platforms have ISA/LPC devices such as Super-IO,
define an ISA node in the dts file to avoid access error.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When enabling both CONFIG_KFENCE and CONFIG_DEBUG_SG, I get the
following backtraces when running LongArch kernels.
[ 2.496257] kernel BUG at include/linux/scatterlist.h:187!
...
[ 2.501925] Call Trace:
[ 2.501950] [<9000000004ad59c4>] sg_init_one+0xac/0xc0
[ 2.502204] [<9000000004a438f8>] do_test_kpp+0x278/0x6e4
[ 2.502353] [<9000000004a43dd4>] alg_test_kpp+0x70/0xf4
[ 2.502494] [<9000000004a41b48>] alg_test+0x128/0x690
[ 2.502631] [<9000000004a3d898>] cryptomgr_test+0x20/0x40
[ 2.502775] [<90000000041b4508>] kthread+0x138/0x158
[ 2.502912] [<9000000004161c48>] ret_from_kernel_thread+0xc/0xa4
The backtrace is always similar but not exactly the same. It is always
triggered from cryptomgr_test, but not always from the same test.
Analysis shows that with CONFIG_KFENCE active, the address returned from
kmalloc() and friends is not always below vm_map_base. It is allocated
by kfence_alloc() which at least sometimes seems to get its memory from
an address space above vm_map_base. This causes __virt_addr_valid() to
return false for the affected objects.
Let __virt_addr_valid() return 1 for kfence pool addresses, this make
virt_addr_valid()/__virt_addr_valid() work with KFENCE.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
KFENCE changes virt_to_page() to be able to translate tlb mapped virtual
addresses, but forget to change virt_to_phys()/phys_to_virt() and other
translation functions as well. This patch fix it, otherwise some drivers
(such as nvme and virtio-blk) cannot work with KFENCE.
All {virt, phys, page, pfn} translation functions are updated:
1, virt_to_pfn()/pfn_to_virt();
2, virt_to_page()/page_to_virt();
3, virt_to_phys()/phys_to_virt().
DMW/TLB mapped addresses are distinguished by comparing the vaddress
with vm_map_base in virt_to_xyz(), and we define WANT_PAGE_VIRTUAL in
the KFENCE case for the reverse translations, xyz_to_virt().
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
functions
There is no need to implement arch_atomic_sub() family of inline
functions, corresponding macros can be directly implemented using
arch_atomic_add() inlines with negated argument.
No functional changes intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240410062957.322614-4-ubizjak@gmail.com
|
|
functions
Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}() functions to
use arch_atomic64_try_cmpxchg(). This implementation avoids one extra
trip through the CMPXCHG loop.
The value preload before the cmpxchg loop does not need to be atomic.
Use arch_atomic64_read_nonatomic(v) to load the value from atomic_t
location in a non-atomic way.
The generated code improves from:
1917d5: 31 c9 xor %ecx,%ecx
1917d7: 31 db xor %ebx,%ebx
1917d9: 89 4c 24 3c mov %ecx,0x3c(%esp)
1917dd: 8b 74 24 24 mov 0x24(%esp),%esi
1917e1: 89 c8 mov %ecx,%eax
1917e3: 89 5c 24 34 mov %ebx,0x34(%esp)
1917e7: 8b 7c 24 28 mov 0x28(%esp),%edi
1917eb: 21 ce and %ecx,%esi
1917ed: 89 74 24 4c mov %esi,0x4c(%esp)
1917f1: 21 df and %ebx,%edi
1917f3: 89 de mov %ebx,%esi
1917f5: 89 7c 24 50 mov %edi,0x50(%esp)
1917f9: 8b 54 24 4c mov 0x4c(%esp),%edx
1917fd: 8b 7c 24 2c mov 0x2c(%esp),%edi
191801: 8b 4c 24 50 mov 0x50(%esp),%ecx
191805: 89 d3 mov %edx,%ebx
191807: 89 f2 mov %esi,%edx
191809: f0 0f c7 0f lock cmpxchg8b (%edi)
19180d: 89 c1 mov %eax,%ecx
19180f: 8b 74 24 34 mov 0x34(%esp),%esi
191813: 89 d3 mov %edx,%ebx
191815: 89 44 24 4c mov %eax,0x4c(%esp)
191819: 8b 44 24 3c mov 0x3c(%esp),%eax
19181d: 89 df mov %ebx,%edi
19181f: 89 54 24 44 mov %edx,0x44(%esp)
191823: 89 ca mov %ecx,%edx
191825: 31 de xor %ebx,%esi
191827: 31 c8 xor %ecx,%eax
191829: 09 f0 or %esi,%eax
19182b: 75 ac jne 1917d9 <...>
to:
1912ba: 8b 06 mov (%esi),%eax
1912bc: 8b 56 04 mov 0x4(%esi),%edx
1912bf: 89 44 24 3c mov %eax,0x3c(%esp)
1912c3: 89 c1 mov %eax,%ecx
1912c5: 23 4c 24 34 and 0x34(%esp),%ecx
1912c9: 89 d3 mov %edx,%ebx
1912cb: 23 5c 24 38 and 0x38(%esp),%ebx
1912cf: 89 54 24 40 mov %edx,0x40(%esp)
1912d3: 89 4c 24 2c mov %ecx,0x2c(%esp)
1912d7: 89 5c 24 30 mov %ebx,0x30(%esp)
1912db: 8b 5c 24 2c mov 0x2c(%esp),%ebx
1912df: 8b 4c 24 30 mov 0x30(%esp),%ecx
1912e3: f0 0f c7 0e lock cmpxchg8b (%esi)
1912e7: 0f 85 f3 02 00 00 jne 1915e0 <...>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240410062957.322614-3-ubizjak@gmail.com
|
|
Introduce arch_atomic64_read_nonatomic() for 32-bit targets to load
the value from atomic64_t location in a non-atomic way. This
function is intended to be used in cases where a subsequent atomic
operation will handle the torn value, and can be used to prime the
first iteration of unconditional try_cmpxchg() loops.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240410062957.322614-2-ubizjak@gmail.com
|
|
Introduce arch_atomic64_try_cmpxchg() for 32-bit targets to use
optimized target specific implementation instead of a generic one.
This implementation eliminates dual-word compare after
cmpxchg8b instruction and improves generated asm code from:
2273: f0 0f c7 0f lock cmpxchg8b (%edi)
2277: 8b 74 24 2c mov 0x2c(%esp),%esi
227b: 89 d3 mov %edx,%ebx
227d: 89 c2 mov %eax,%edx
227f: 89 5c 24 10 mov %ebx,0x10(%esp)
2283: 8b 7c 24 30 mov 0x30(%esp),%edi
2287: 89 44 24 1c mov %eax,0x1c(%esp)
228b: 31 f2 xor %esi,%edx
228d: 89 d0 mov %edx,%eax
228f: 89 da mov %ebx,%edx
2291: 31 fa xor %edi,%edx
2293: 09 d0 or %edx,%eax
2295: 0f 85 a5 00 00 00 jne 2340 <...>
to:
2270: f0 0f c7 0f lock cmpxchg8b (%edi)
2274: 0f 85 a6 00 00 00 jne 2320 <...>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240410062957.322614-1-ubizjak@gmail.com
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/63c9d1e6b07296916e4218c63f59a2dd6c6b6b16.1712732665.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/c7d669d8b0c994c77fb4c3bc7bec78aeb8659c74.1712732665.git.u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/adb9b0aca77d7aa8e54d0a664a4ee290834a60a1.1712732665.git.u.kleine-koenig@pengutronix.de
|
|
Lunar Lake RAPL support is the same as previous Sky Lake.
Add Lunar Lake model for RAPL.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240410124554.448987-2-rui.zhang@intel.com
|
|
Arrow Lake RAPL support is the same as previous Sky Lake.
Add Arrow Lake model for RAPL.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240410124554.448987-1-rui.zhang@intel.com
|
|
Since K230 has been supported, allow ARCH_CANAAN to be selected to build dt
and drivers for it in defconfig.
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The ARCH_ and SOC_ versions of this symbol have persisted for quite a
while now in parallel. Generated .config files from previous LTS kernels
should have both. Finally remove SOC_VIRT and update all config files
using it.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
All the users in the kernel are gone and generated .config files from
previous LTS kernels will contain ARCH_SIFIVE. Drop SOC_SIFIVE and
update the defconfig.
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
SOC_MICROCHIP_POLARFIRE doesn't have any remaining in-kernel users, so
time has come to remove it. Foolish auld me left the "POLARFIRE" in the
new, hidden, config option when I renamed it and changed all of the
users however. As HPSC has been announced, and is not a PolarFire,
drop mention of that specific FPGA family from the new user-visible
config option.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
with CM4 adaper
This adds a basic devicetree for the MNT Reform2 DIY laptop when using a
CM4 adapter and a BPI-CM4 module.
Co-developed-by: Lukas F. Hartmann <lukas@mntre.com>
Link: https://lore.kernel.org/r/20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-7-99ecdfdc87fc@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
This add dtbo overlay to support the Khadas TS050 panel on the
Khadas VIM3 & VIM3L boards.
Link: https://lore.kernel.org/r/20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-6-99ecdfdc87fc@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add the MIPI DSI Analog & Digital PHY nodes and the DSI control
nodes with proper port endpoint to the VPU.
Link: https://lore.kernel.org/r/20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-5-99ecdfdc87fc@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
This commit adds SPI flash support for Khadas Edge 2.
Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Link: https://lore.kernel.org/r/00942603f7e61ecb2a0067bebf6795dab3571613.1708381247.git.efectn@protonmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
tsadc
This commit enables tsadc, saradc and the
function button on saradc line for Khadas Edge 2.
Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Link: https://lore.kernel.org/r/03feaafefd0c13268ba1630251558749654a567d.1708381247.git.efectn@protonmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Khadas Edge 2 exposes IR receiver pins as same as TF card via EXTIO. The
IR receiver is connected to MCU and SoC.
The board also has 2 PWM RGB leds. One is controlled by MCU and the
other is controlled by SoC. This commit adds support for the led
controlled by SoC using pwm-leds.
Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Link: https://lore.kernel.org/r/335629f57e593e20418a4a55a1e662505640cbde.1708381247.git.efectn@protonmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Khadas Edge 2 has 1x USB2 with hub, 1x USB3 Host and 1x USB-C.
This commit adds support for PCIe2, USB3 Host and USB2.
Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Link: https://lore.kernel.org/r/4d22afd70e5583458f405f5170f67690584e7efa.1708381247.git.efectn@protonmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add TF card support to Khadas Edge 2.
The board exposes sdmmc pins via EXTIO. TF card can be used with IO
module.
Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Link: https://lore.kernel.org/r/6e9062feb40bbad304f2e5bb300601034e805081.1708381247.git.efectn@protonmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This commit adds PMIC to Khadas Edge 2 board.
Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Link: https://lore.kernel.org/r/617faf64a68f5af560267d77fd23fc9fb23e6c88.1708381247.git.efectn@protonmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This commit adds 5V fixed power regulator and CPU regulators to Khadas
Edge 2.
Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Link: https://lore.kernel.org/r/5a7bd2cd8703e51382abfc11242de59d45286477.1708381247.git.efectn@protonmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
With default dts configuration for BPI-R2Pro, the regulator for sd card is
powered off when reboot is commanded, and the only solution to detect the
sd card again, and therefore, allow rebooting from there, is to do a
hardware reset.
Configure the regulator for sd to be always on for BPI-R2Pro in order to
avoid this issue.
Fixes: f901aaadaa2a ("arm64: dts: rockchip: Add Bananapi R2 Pro")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://lore.kernel.org/r/20240305143222.189413-1-jtornosm@redhat.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
