| Age | Commit message (Collapse) | Author |
|---|
|
In retrospect, it is fairly obvious that the FP state ownership
is only meaningful for a given CPU, and that locating this
information in the vcpu was just a mistake.
Move the ownership tracking into the host data structure, and
rename it from fp_state to fp_owner, which is a better description
(name suggested by Mark Brown).
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
As the name of the field indicates, host_fpsimd_state is strictly
a host piece of data, and we reset this pointer on each PID change.
So let's move it where it belongs, and set it at load-time. Although
this is slightly more often, it is a well defined life-cycle which
matches other pieces of data.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
As for the rest of the host debug state, the host copy of mdcr_el2
has little to do in the vcpu, and is better placed in the host_data
structure.
Reviewed-by : Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Keeping host_debug_state on a per-vcpu basis is completely
pointless. The lifetime of this data is only that of the inner
run-loop, which means it is never accessed outside of the core
EL2 code.
Move the structure into kvm_host_data, and save over 500 bytes
per vcpu.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In order to facilitate the introduction of new per-CPU state,
add a new host_data_ptr() helped that hides some of the per-CPU
verbosity, and make it easier to move that state around in the
future.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Currently we're using "sbfx" to extract the PMUVer from ID_AA64DFR0_EL1
and skip the init/reset if no PMU present when the extracted PMUVer is
negative or is zero. However for PMUv3p8 the PMUVer will be 0b1000 and
PMUVer extracted by "sbfx" will always be negative and we'll skip the
init/reset in __init_el2_debug/reset_pmuserenr_el0 unexpectedly.
So this patch use "ubfx" instead of "sbfx" to extract the PMUVer. If
the PMUVer is implementation defined (0b1111) or not implemented(0b0000)
then skip the reset/init. Previously we'll also skip the init/reset
if the PMUVer is higher than the version we known (currently PMUv3p9),
with this patch we'll only skip if the PMU is not implemented or
implementation defined. This keeps consistence with how we probe
the PMU in the driver with pmuv3_implemented().
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240411123030.7201-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
per-CPU SEV data is dominantly accessed from their own local CPUs,
so allocate them node-local to improve performance.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Nikunj A Dadhania <nikunj@amd.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240412030130.49704-1-lirongqing@baidu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
There's a new conflict between this commit pending in x86/cpu:
63edbaa48a57 x86/cpu/topology: Add support for the AMD 0x80000026 leaf
And these fixes in x86/urgent:
c064b536a8f9 x86/cpu/amd: Make the NODEID_MSR union actually work
1b3108f6898e x86/cpu/amd: Make the CPUID 0x80000008 parser correct
Resolve them.
Conflicts:
arch/x86/kernel/cpu/topology_amd.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The topology rework missed that early_init_amd() tries to re-enable the
Topology Extensions when the BIOS disabled them.
The new parser is invoked before early_init_amd() so the re-enable attempt
happens too late.
Move it into the AMD specific topology parser code where it belongs.
Fixes: f7fb3b2dd92c ("x86/cpu: Provide an AMD/HYGON specific topology parser")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/878r1j260l.ffs@tglx
|
|
A system with NODEID_MSR was reported to crash during early boot without
any output.
The reason is that the union which is used for accessing the bitfields in
the MSR is written wrongly and the resulting executable code accesses the
wrong part of the MSR data.
As a consequence a later division by that value results in 0 and that
result is used for another division as divisor, which obviously does not
work well.
The magic world of C, unions and bitfields:
union {
u64 bita : 3,
bitb : 3;
u64 all;
} x;
x.all = foo();
a = x.bita;
b = x.bitb;
results in the effective executable code of:
a = b = x.bita;
because bita and bitb are treated as union members and therefore both end
up at bit offset 0.
Wrapping the bitfield into an anonymous struct:
union {
struct {
u64 bita : 3,
bitb : 3;
};
u64 all;
} x;
works like expected.
Rework the NODEID_MSR union in exactly that way to cure the problem.
Fixes: f7fb3b2dd92c ("x86/cpu: Provide an AMD/HYGON specific topology parser")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Reported-by: Laura Nao <laura.nao@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Laura Nao <laura.nao@collabora.com>
Link: https://lore.kernel.org/r/20240410194311.596282919@linutronix.de
Closes: https://lore.kernel.org/all/20240322175210.124416-1-laura.nao@collabora.com/
|
|
CPUID 0x80000008 ECX.cpu_nthreads describes the number of threads in the
package. The parser uses this value to initialize the SMT domain level.
That's wrong because cpu_nthreads does not describe the number of threads
per physical core. So this needs to set the CORE domain level and let the
later parsers set the SMT shift if available.
Preset the SMT domain level with the assumption of one thread per core,
which is correct ifrt here are no other CPUID leafs to parse, and propagate
cpu_nthreads and the core level APIC bitwidth into the CORE domain.
Fixes: f7fb3b2dd92c ("x86/cpu: Provide an AMD/HYGON specific topology parser")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Reported-by: Laura Nao <laura.nao@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Laura Nao <laura.nao@collabora.com>
Link: https://lore.kernel.org/r/20240410194311.535206450@linutronix.de
|
|
For consistency with the other CONFIG_MITIGATION_* options, replace the
CONFIG_SPECTRE_BHI_{ON,OFF} options with a single
CONFIG_MITIGATION_SPECTRE_BHI option.
[ mingo: Fix ]
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/3833812ea63e7fdbe36bf8b932e63f70d18e2a2a.1712813475.git.jpoimboe@kernel.org
|
|
Unlike most other mitigations' "auto" options, spectre_bhi=auto only
mitigates newer systems, which is confusing and not particularly useful.
Remove it.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/412e9dc87971b622bbbaf64740ebc1f140bff343.1712813475.git.jpoimboe@kernel.org
|
|
Now that struct perf_event's orig_overflow_handler is gone, there's no need
for the functions and macros to support looking past overflow_handler to
orig_overflow_handler.
This patch is solely a refactoring and results in no behavior change.
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240412015019.7060-6-khuey@kylehuey.com
|
|
__raw_callee_save___pv_queued_spin_unlock()
x86 CMPXCHG instruction returns success in the ZF flag. Remove
redundant CMP instruction after CMPXCHG that performs the same check.
Also update the function comment to mention the modern version
of the equivalent C code.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240412083908.282802-1-ubizjak@gmail.com
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
TDX uses different ABI to get information about VM exit. Pass intr_info to
the NMI and INTR handlers instead of pulling it from vcpu_vmx in
preparation for sharing the bulk of the handlers with TDX.
When the guest TD exits to VMM, RAX holds status and exit reason, RCX holds
exit qualification etc rather than the VMCS fields because VMM doesn't have
access to the VMCS. The eventual code will be
VMX:
- get exit reason, intr_info, exit_qualification, and etc from VMCS
- call NMI/INTR handlers (common code)
TDX:
- get exit reason, intr_info, exit_qualification, and etc from guest
registers
- call NMI/INTR handlers (common code)
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <0396a9ae70d293c9d0b060349dae385a8a4fbcec.1705965635.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM accesses Virtual Machine Control Structure (VMCS) with VMX instructions
to operate on VM. TDX doesn't allow VMM to operate VMCS directly.
Instead, TDX has its own data structures, and TDX SEAMCALL APIs for VMM to
indirectly operate those data structures. This means we must have a TDX
version of kvm_x86_ops.
The existing global struct kvm_x86_ops already defines an interface which
can be adapted to TDX, but kvm_x86_ops is a system-wide, not per-VM
structure. To allow VMX to coexist with TDs, the kvm_x86_ops callbacks
will have wrappers "if (tdx) tdx_op() else vmx_op()" to pick VMX or
TDX at run time.
To split the runtime switch, the VMX implementation, and the TDX
implementation, add main.c, and move out the vmx_x86_ops hooks in
preparation for adding TDX. Use 'vt' for the naming scheme as a nod to
VT-x and as a concatenation of VmxTdx.
The eventually converted code will look like this:
vmx.c:
vmx_op() { ... }
VMX initialization
tdx.c:
tdx_op() { ... }
TDX initialization
x86_ops.h:
vmx_op();
tdx_op();
main.c:
static vt_op() { if (tdx) tdx_op() else vmx_op() }
static struct kvm_x86_ops vt_x86_ops = {
.op = vt_op,
initialization functions call both VMX and TDX initialization
Opportunistically, fix the name inconsistency from vmx_create_vcpu() and
vmx_free_vcpu() to vmx_vcpu_create() and vmx_vcpu_free().
Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Message-Id: <e603c317587f933a9d1bee8728c84e4935849c16.1705965634.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
By necessity, TDX will use a different register ABI for hypercalls.
Break out the core functionality so that it may be reused for TDX.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <5134caa55ac3dec33fb2addb5545b52b3b52db02.1705965635.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The idea that no parameter would ever be necessary when enabling SEV or
SEV-ES for a VM was decidedly optimistic. The first source of variability
that was encountered is the desired set of VMSA features, as that affects
the measurement of the VM's initial state and cannot be changed
arbitrarily by the hypervisor.
This series adds all the APIs that are needed to customize the features,
with room for future enhancements:
- a new /dev/kvm device attribute to retrieve the set of supported
features (right now, only debug swap)
- a new sub-operation for KVM_MEM_ENCRYPT_OP that can take a struct,
replacing the existing KVM_SEV_INIT and KVM_SEV_ES_INIT
It then puts the new op to work by including the VMSA features as a field
of the The existing KVM_SEV_INIT and KVM_SEV_ES_INIT use the full set of
supported VMSA features for backwards compatibility; but I am considering
also making them use zero as the feature mask, and will gladly adjust the
patches if so requested.
In order to avoid creating *two* new KVM_MEM_ENCRYPT_OPs, I decided that
I could as well make SEV and SEV-ES use VM types. This allows SEV-SNP
to reuse the KVM_SEV_INIT2 ioctl.
And while at it, KVM_SEV_INIT2 also includes two bugfixes. First of all,
SEV-ES VM, when created with the new VM type instead of KVM_SEV_ES_INIT,
reject KVM_GET_REGS/KVM_SET_REGS and friends on the vCPU file descriptor
once the VMSA has been encrypted... which is how the API should have
always behaved. Second, they also synchronize the FPU and AVX state.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Make the non-AVX implementation of AES-XTS (xts-aes-aesni) use the new
glue code that was introduced for the AVX implementations of AES-XTS.
This reduces code size, and it improves the performance of xts-aes-aesni
due to the optimization for messages that don't span page boundaries.
This required moving the new glue functions higher up in the file and
allowing the IV encryption function to be specified by the caller.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since sha512_transform_rorx() uses ymm registers, execute vzeroupper
before returning from it. This is necessary to avoid reducing the
performance of SSE code.
Fixes: e01d69cb0195 ("crypto: sha512 - Optimized SHA512 x86_64 assembly routine using AVX instructions.")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since sha256_transform_rorx() uses ymm registers, execute vzeroupper
before returning from it. This is necessary to avoid reducing the
performance of SSE code.
Fixes: d34a460092d8 ("crypto: sha256 - Optimized sha256 x86_64 routine using AVX2's RORX instructions")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since nh_avx2() uses ymm registers, execute vzeroupper before returning
from it. This is necessary to avoid reducing the performance of SSE
code.
Fixes: 0f961f9f670e ("crypto: x86/nhpoly1305 - add AVX2 accelerated NHPoly1305")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
QMP PHY used in SC7180 requires 3 clocks:
* ref - 19.2MHz reference clock from RPMh
* ref_aux - Auxiliary reference clock from GCC
* qref - QREF clock from GCC
While at it, let's move 'clocks' property before 'clock-names' to match
the style used commonly.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240401182240.55282-3-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Some cosmetic changes (Erni Sri Satya Vennela, Li Zhijian)
- Introduce hv_numa_node_to_pxm_info() (Nuno Das Neves)
- Fix KVP daemon to handle IPv4 and IPv6 combination for keyfile format
(Shradha Gupta)
- Avoid freeing decrypted memory in a confidential VM (Rick Edgecombe
and Michael Kelley)
* tag 'hyperv-fixes-signed-20240411' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Don't free ring buffers that couldn't be re-encrypted
uio_hv_generic: Don't free decrypted memory
hv_netvsc: Don't free decrypted memory
Drivers: hv: vmbus: Track decrypted status in vmbus_gpadl
Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails
hv/hv_kvp_daemon: Handle IPv4 and Ipv6 combination for keyfile format
hv: vmbus: Convert sprintf() family to sysfs_emit() family
mshyperv: Introduce hv_numa_node_to_pxm_info()
x86/hyperv: Cosmetic changes for hv_apic.c
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/unix/garbage.c
47d8ac011fe1 ("af_unix: Fix garbage collector racing against connect()")
4090fa373f0e ("af_unix: Replace garbage collection algorithm.")
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
faa12ca24558 ("bnxt_en: Reset PTP tx_avail after possible firmware reset")
b3d0083caf9a ("bnxt_en: Support RSS contexts in ethtool .{get|set}_rxfh()")
drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
7ac10c7d728d ("bnxt_en: Fix possible memory leak in bnxt_rdma_aux_device_init()")
194fad5b2781 ("bnxt_en: Refactor bnxt_rdma_aux_device_init/uninit functions")
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
958f56e48385 ("net/mlx5e: Un-expose functions in en.h")
49e6c9387051 ("net/mlx5e: RSS, Block XOR hash with over 128 channels")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Drop the "If AD bits are enabled/disabled" verbiage from the comments
above kvm_tdp_mmu_clear_dirty_{slot,pt_masked}() since TDP MMU SPTEs may
need to be write-protected even when A/D bits are enabled. i.e. These
comments aren't technically correct.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240315230541.1635322-4-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop the comments above clear_dirty_gfn_range() and
clear_dirty_pt_masked(), since each is word-for-word identical to the
comment above their parent function.
Leave the comment on the parent functions since they are APIs called by
the KVM/x86 MMU.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240315230541.1635322-3-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Check kvm_mmu_page_ad_need_write_protect() when deciding whether to
write-protect or clear D-bits on TDP MMU SPTEs, so that the TDP MMU
accounts for any role-specific reasons for disabling D-bit dirty logging.
Specifically, TDP MMU SPTEs must be write-protected when the TDP MMU is
being used to run an L2 (i.e. L1 has disabled EPT) and PML is enabled.
KVM always disables PML when running L2, even when L1 and L2 GPAs are in
the some domain, so failing to write-protect TDP MMU SPTEs will cause
writes made by L2 to not be reflected in the dirty log.
Reported-by: syzbot+900d58a45dcaab9e4821@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=900d58a45dcaab9e4821
Fixes: 5982a5392663 ("KVM: x86/mmu: Use kvm_ad_enabled() to determine if TDP MMU SPTEs need wrprot")
Cc: stable@vger.kernel.org
Cc: Vipin Sharma <vipinsh@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240315230541.1635322-2-dmatlack@google.com
[sean: massage shortlog and changelog, tweak ternary op formatting]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Set kvm_mmu_page_role.invalid to mark the various MMU root_roles invalid
during CPUID update in order to force a refresh, instead of zeroing out
the entire role. This fixes a bug where kvm_mmu_free_roots() incorrectly
thinks a root is indirect, i.e. not a TDP MMU, due to "direct" being
zeroed, which in turn causes KVM to take mmu_lock for write instead of
read.
Note, paving over the entire role was largely unintentional, commit
7a458f0e1ba1 ("KVM: x86/mmu: remove extended bits from mmu_role, rename
field") simply missed that "invalid" could be set.
Fixes: 576a15de8d29 ("KVM: x86/mmu: Free TDP MMU roots while holding mmy_lock for read")
Reported-by: syzbot+dc308fcfcd53f987de73@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/0000000000009b38080614c49bdb@google.com
Cc: Phi Nguyen <phind.uet@gmail.com>
Link: https://lore.kernel.org/r/20240408231115.1387279-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Disable LBR virtualization if the CPU doesn't support callstacks, which
were introduced in HSW (see commit e9d7f7cd97c4 ("perf/x86/intel: Add
basic Haswell LBR call stack support"), as KVM unconditionally configures
the perf LBR event with PERF_SAMPLE_BRANCH_CALL_STACK, i.e. LBR
virtualization always fails on pre-HSW CPUs.
Simply disable LBR support on such CPUs, as it has never worked, i.e.
there is no risk of breaking an existing setup, and figuring out a way
to performantly context switch LBRs on old CPUs is not worth the effort.
Fixes: be635e34c284 ("KVM: vmx/pmu: Expose LBR_FMT in the MSR_IA32_PERF_CAPABILITIES")
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Jim Mattson <jmattson@google.com>
Tested-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20240307011344.835640-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a "has_callstack" field to the x86_pmu_lbr structure used to pass
information to KVM, and set it accordingly in x86_perf_get_lbr(). KVM
will use has_callstack to avoid trying to create perf LBR events with
PERF_SAMPLE_BRANCH_CALL_STACK on CPUs that don't support callstacks.
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20240307011344.835640-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Snapshot VMX's LBR capabilities once during module initialization instead
of calling into perf every time a vCPU reconfigures its vPMU. This will
allow massaging the LBR capabilities, e.g. if the CPU doesn't support
callstacks, without having to remember to update multiple locations.
Opportunistically tag vmx_get_perf_capabilities() with __init, as it's
only called from vmx_set_cpu_caps().
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20240307011344.835640-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
- make {virt, phys, page, pfn} translation work with KFENCE for
LoongArch (otherwise NVMe and virtio-blk cannot work with KFENCE
enabled)
- update dts files for Loongson-2K series to make devices work
correctly
- fix a build error
* tag 'loongarch-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Include linux/sizes.h in addrspace.h to prevent build errors
LoongArch: Update dts for Loongson-2K2000 to support GMAC/GNET
LoongArch: Update dts for Loongson-2K2000 to support PCI-MSI
LoongArch: Update dts for Loongson-2K2000 to support ISA/LPC
LoongArch: Update dts for Loongson-2K1000 to support ISA/LPC
LoongArch: Make virt_addr_valid()/__virt_addr_valid() work with KFENCE
LoongArch: Make {virt, phys, page, pfn} translation work with KFENCE
mm: Move lowmem_page_address() a little later
|
|
Khadas Edge 2 has PT7C4363 RTC that compatible with HYM8563.
The RTC pinctrl is also connected to MCU.
Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Link: https://lore.kernel.org/r/4c4c9140ff36f290ba64ecc8b3e218df6a5ab273.1708381247.git.efectn@protonmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Khadas Edge 2 has onboard AP6275P Wi-Fi6 (PCIe2) and BT5 (UART9) module.
This commit enables UART9.
Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Link: https://lore.kernel.org/r/0a10afeff3aec3a8bccca2dbe4e65f7b4a2c4666.1708381247.git.efectn@protonmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The .change_pte() MMU notifier callback was intended as an
optimization. The original point of it was that KSM could tell KVM to flip
its secondary PTE to a new location without having to first zap it. At
the time there was also an .invalidate_page() callback; both of them were
*not* bracketed by calls to mmu_notifier_invalidate_range_{start,end}(),
and .invalidate_page() also doubled as a fallback implementation of
.change_pte().
Later on, however, both callbacks were changed to occur within an
invalidate_range_start/end() block.
In the case of .change_pte(), commit 6bdb913f0a70 ("mm: wrap calls to
set_pte_at_notify with invalidate_range_start and invalidate_range_end",
2012-10-09) did so to remove the fallback from .invalidate_page() to
.change_pte() and allow sleepable .invalidate_page() hooks.
This however made KVM's usage of the .change_pte() callback completely
moot, because KVM unmaps the sPTEs during .invalidate_range_start()
and therefore .change_pte() has no hope of finding a sPTE to change.
Drop the generic KVM code that dispatches to kvm_set_spte_gfn(), as
well as all the architecture specific implementations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Anup Patel <anup@brainfault.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20240405115815.3226315-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The DebugSwap feature of SEV-ES provides a way for confidential guests
to use data breakpoints. Its status is record in VMSA, and therefore
attestation signatures depend on whether it is enabled or not. In order
to avoid invalidating the signatures depending on the host machine, it
was disabled by default (see commit 5abf6dceb066, "SEV: disable SEV-ES
DebugSwap by default", 2024-03-09).
However, we now have a new API to create SEV VMs that allows enabling
DebugSwap based on what the user tells KVM to do, and we also changed the
legacy KVM_SEV_ES_INIT API to never enable DebugSwap. It is therefore
possible to re-enable the feature without breaking compatibility with
kernels that pre-date the introduction of DebugSwap, so go ahead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-14-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The idea that no parameter would ever be necessary when enabling SEV or
SEV-ES for a VM was decidedly optimistic. In fact, in some sense it's
already a parameter whether SEV or SEV-ES is desired. Another possible
source of variability is the desired set of VMSA features, as that affects
the measurement of the VM's initial state and cannot be changed
arbitrarily by the hypervisor.
Create a new sub-operation for KVM_MEMORY_ENCRYPT_OP that can take a struct,
and put the new op to work by including the VMSA features as a field of the
struct. The existing KVM_SEV_INIT and KVM_SEV_ES_INIT use the full set of
supported VMSA features for backwards compatibility.
The struct also includes the usual bells and whistles for future
extensibility: a flags field that must be zero for now, and some padding
at the end.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
SEV-ES allows passing custom contents for x87, SSE and AVX state into the VMSA.
Allow userspace to do that with the usual KVM_SET_XSAVE API and only mark
FPU contents as confidential after it has been copied and encrypted into
the VMSA.
Since the XSAVE state for AVX is the first, it does not need the
compacted-state handling of get_xsave_addr(). However, there are other
parts of XSAVE state in the VMSA that currently are not handled, and
the validation logic of get_xsave_addr() is pointless to duplicate
in KVM, so move get_xsave_addr() to public FPU API; it is really just
a facility to operate on XSAVE state and does not expose any internal
details of arch/x86/kernel/fpu.
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-12-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-10-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This simplifies the implementation of KVM_CHECK_EXTENSION(KVM_CAP_VM_TYPES),
and also allows the vendor module to specify which VM types are supported.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-9-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Some VM types have characteristics in common; in fact, the only use
of VM types right now is kvm_arch_has_private_mem and it assumes that
_all_ nonzero VM types have private memory.
We will soon introduce a VM type for SEV and SEV-ES VMs, and at that
point we will have two special characteristics of confidential VMs
that depend on the VM type: not just if memory is private, but
also whether guest state is protected. For the latter we have
kvm->arch.guest_state_protected, which is only set on a fully initialized
VM.
For VM types with protected guest state, we can actually fix a problem in
the SEV-ES implementation, where ioctls to set registers do not cause an
error even if the VM has been initialized and the guest state encrypted.
Make sure that when using VM types that will become an error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240209183743.22030-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <20240404121327.3107131-8-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Right now, the set of features that are stored in the VMSA upon
initialization is fixed and depends on the module parameters for
kvm-amd.ko. However, the hypervisor cannot really change it at will
because the feature word has to match between the hypervisor and whatever
computes a measurement of the VMSA for attestation purposes.
Add a field to kvm_sev_info that holds the set of features to be stored
in the VMSA; and query it instead of referring to the module parameters.
Because KVM_SEV_INIT and KVM_SEV_ES_INIT accept no parameters, this
does not yet introduce any functional change, but it paves the way for
an API that allows customization of the features per-VM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240209183743.22030-6-pbonzini@redhat.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Compute the set of features to be stored in the VMSA when KVM is
initialized; move it from there into kvm_sev_info when SEV is initialized,
and then into the initial VMSA.
The new variable can then be used to return the set of supported features
to userspace, via the KVM_GET_DEVICE_ATTR ioctl.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <20240404121327.3107131-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Allow vendor modules to provide their own attributes on /dev/kvm.
To avoid proliferation of vendor ops, implement KVM_HAS_DEVICE_ATTR
and KVM_GET_DEVICE_ATTR in terms of the same function. You're not
supposed to use KVM_GET_DEVICE_ATTR to do complicated computations,
especially on /dev/kvm.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <20240404121327.3107131-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is no danger to the kernel if 32-bit userspace provides a 64-bit
value that has the high bits set, but for whatever reason happens to
resolve to an address that has something mapped there. KVM uses the
checked version of get_user() and put_user(), so any faults are caught
properly.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Stop compiling sev.c when CONFIG_KVM_AMD_SEV=n, as the number of #ifdefs
in sev.c is getting ridiculous, and having #ifdefs inside of SEV helpers
is quite confusing.
To minimize #ifdefs in code flows, #ifdef away only the kvm_x86_ops hooks
and the #VMGEXIT handler. Stubs are also restricted to functions that
check sev_enabled and to the destruction functions sev_free_cpu() and
sev_vm_destroy(), where the style of their callers is to leave checks
to the callers. Most call sites instead rely on dead code elimination
to take care of functions that are guarded with sev_guest() or
sev_es_guest().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
